From: Frank Schaefer Date: Sun, 24 Mar 2013 20:09:59 +0000 (-0300) Subject: [media] em28xx-i2c: fix coding style of multi line comments X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=fa74aca3a3decbd8e8ff2f25ef86edcc61222455;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [media] em28xx-i2c: fix coding style of multi line comments Signed-off-by: Frank Schäfer Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index db40835888d1..704f283d34ab 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -171,8 +171,10 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, if (len < 1 || len > 64) return -EOPNOTSUPP; - /* NOTE: limited by the USB ctrl message constraints - * Zero length reads always succeed, even if no device is connected */ + /* + * NOTE: limited by the USB ctrl message constraints + * Zero length reads always succeed, even if no device is connected + */ /* Write to i2c device */ ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); @@ -202,9 +204,11 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, return ret; } msleep(5); - /* NOTE: do we really have to wait for success ? - Never seen anything else than 0x00 or 0x10 - (even with high payload) ... */ + /* + * NOTE: do we really have to wait for success ? + * Never seen anything else than 0x00 or 0x10 + * (even with high payload) ... + */ } em28xx_warn("write to i2c device at 0x%x timed out\n", addr); return -EIO; @@ -220,8 +224,10 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) if (len < 1 || len > 64) return -EOPNOTSUPP; - /* NOTE: limited by the USB ctrl message constraints - * Zero length reads always succeed, even if no device is connected */ + /* + * NOTE: limited by the USB ctrl message constraints + * Zero length reads always succeed, even if no device is connected + */ /* Read data from i2c device */ ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len); @@ -230,7 +236,8 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) addr, ret); return ret; } - /* NOTE: some devices with two i2c busses have the bad habit to return 0 + /* + * NOTE: some devices with two i2c busses have the bad habit to return 0 * bytes if we are on bus B AND there was no write attempt to the * specified slave address before AND no device is present at the * requested slave address. @@ -366,9 +373,10 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, return num; } -/* based on linux/sunrpc/svcauth.h and linux/hash.h +/* + * based on linux/sunrpc/svcauth.h and linux/hash.h * The original hash function returns a different value, if arch is x86_64 - * or i386. + * or i386. */ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits) { @@ -391,8 +399,10 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits) return (hash >> (32 - bits)) & 0xffffffffUL; } -/* Helper function to read data blocks from i2c clients with 8 or 16 bit - * address width, 8 bit register width and auto incrementation been activated */ +/* + * Helper function to read data blocks from i2c clients with 8 or 16 bit + * address width, 8 bit register width and auto incrementation been activated + */ static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr, bool addr_w16, u16 len, u8 *data) { @@ -434,9 +444,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, u8 **eedata, u16 *eedata_len) { const u16 len = 256; - /* FIXME common length/size for bytes to read, to display, hash + /* + * FIXME common length/size for bytes to read, to display, hash * calculation and returned device dataset. Simplifies the code a lot, - * but we might have to deal with multiple sizes in the future ! */ + * but we might have to deal with multiple sizes in the future ! + */ int i, err; struct em28xx_eeprom *dev_config; u8 buf, *data; @@ -497,7 +509,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, em28xx_info("EEPROM info:\n"); em28xx_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n", mc_start, data[2]); - /* boot configuration (address 0x0002): + /* + * boot configuration (address 0x0002): * [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz * [1] always selects 12 kb RAM * [2] USB device speed: 1 = force Full Speed; 0 = auto detect @@ -506,8 +519,10 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, * characterization */ - /* Read hardware config dataset offset from address - * (microcode start + 46) */ + /* + * Read hardware config dataset offset from address + * (microcode start + 46) + */ err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2, data); if (err != 2) { @@ -520,7 +535,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, hwconf_offset = mc_start + data[0] + (data[1] << 8); /* Read hardware config dataset */ - /* NOTE: the microcode copy can be multiple pages long, but + /* + * NOTE: the microcode copy can be multiple pages long, but * we assume the hardware config dataset is the same as in * the old eeprom and not longer than 256 bytes. * tveeprom is currently also limited to 256 bytes.