From: Uwe Kleine-König Date: Tue, 22 Dec 2009 16:31:05 +0000 (+0100) Subject: imx/mx3: depend on USB_ULPI for otg_ulpi_create X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f9ffaa9ca9889f17ef30b82bc0bf954d141280f8;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git imx/mx3: depend on USB_ULPI for otg_ulpi_create otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König Cc: Sascha Hauer Cc: Valentin Longchamp Cc: Daniel Mack Signed-off-by: Sascha Hauer --- diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index ea8ed109a7c2..28294416b0af 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -49,6 +49,7 @@ config MACH_PCM037_EET config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -63,7 +64,7 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - select MXC_ULPI + select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 4697164943d1..789b20d1730f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { * USB */ +#if defined(CONFIG_USB_ULPI) #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; +#endif /* * NOR flash @@ -256,11 +258,13 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_spi_device1, &spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); +#if defined(CONFIG_USB_ULPI) /* USB */ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 839f09aef8b2..cfd605d078ec 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +#if defined(CONFIG_USB_ULPI) + #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) static int moboard_usbh2_hw_init(struct platform_device *pdev) @@ -394,6 +396,9 @@ static int __init moboard_usbh2_init(void) return mxc_register_device(&mxc_usbh2, &usbh2_pdata); } +#else +static inline int moboard_usbh2_init(void) { return 0; } +#endif static struct gpio_led mx31moboard_leds[] = {