From: Taku Izumi Date: Thu, 23 Oct 2008 02:52:12 +0000 (+0900) Subject: PCI hotplug: shpchp: replace printk with dev_printk X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f98ca311f3a32e2adc229fecd6bf732db07fcca3;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git PCI hotplug: shpchp: replace printk with dev_printk This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi Signed-off-by: Jesse Barnes --- diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 4d9fed00e1d0..0d48d38cbf41 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -59,6 +59,20 @@ extern struct workqueue_struct *shpchp_wq; #define warn(format, arg...) \ printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) +#define ctrl_dbg(ctrl, format, arg...) \ + do { \ + if (shpchp_debug) \ + dev_printk(, &ctrl->pci_dev->dev, \ + format, ## arg); \ + } while (0) +#define ctrl_err(ctrl, format, arg...) \ + dev_err(&ctrl->pci_dev->dev, format, ## arg) +#define ctrl_info(ctrl, format, arg...) \ + dev_info(&ctrl->pci_dev->dev, format, ## arg) +#define ctrl_warn(ctrl, format, arg...) \ + dev_warn(&ctrl->pci_dev->dev, format, ## arg) + + #define SLOT_NAME_SIZE 10 struct slot { u8 bus; @@ -239,7 +253,7 @@ static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device) return slot; } - err("%s: slot (device=0x%x) not found\n", __func__, device); + ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device); return NULL; } @@ -273,7 +287,9 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot) pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg); perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK; if (perr_set) { - dbg ("%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__func__ , perr_set); + ctrl_dbg(p_slot->ctrl, + "%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n", + __func__ , perr_set); pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set); } @@ -282,7 +298,8 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot) pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg); rse_set = pcix_mem_base_reg & RSE_MASK; if (rse_set) { - dbg ("%s W1C: Memory_Base_Limit[ RSE ]\n",__func__ ); + ctrl_dbg(p_slot->ctrl, "%s W1C: Memory_Base_Limit[ RSE ]\n", + __func__); pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set); } diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 7af9191df4d6..214633bf4abc 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -89,7 +89,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot); @@ -135,13 +136,14 @@ static int init_slots(struct controller *ctrl) snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; - dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " - "slot_device_offset=%x\n", slot->bus, slot->device, - slot->hp_slot, slot->number, ctrl->slot_device_offset); + ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x " + "slot_device_offset=%x\n", slot->bus, slot->device, + slot->hp_slot, slot->number, ctrl->slot_device_offset); retval = pci_hp_register(slot->hotplug_slot, ctrl->pci_dev->subordinate, slot->device, name); if (retval) { - err("pci_hp_register failed with error %d\n", retval); + ctrl_err(ctrl, "pci_hp_register failed with error %d\n", + retval); goto error_info; } @@ -187,7 +189,8 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); hotplug_slot->info->attention_status = status; slot->hpc_ops->set_attention_status(slot, status); @@ -199,7 +202,8 @@ static int enable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); return shpchp_sysfs_enable_slot(slot); } @@ -208,7 +212,8 @@ static int disable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); return shpchp_sysfs_disable_slot(slot); } @@ -218,7 +223,8 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_power_status(slot, value); if (retval < 0) @@ -232,7 +238,8 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_attention_status(slot, value); if (retval < 0) @@ -246,7 +253,8 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_latch_status(slot, value); if (retval < 0) @@ -260,7 +268,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_adapter_status(slot, value); if (retval < 0) @@ -275,7 +284,8 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_max_bus_speed(slot, value); if (retval < 0) @@ -289,7 +299,8 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); + ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", + __func__, slot_name(slot)); retval = slot->hpc_ops->get_cur_bus_speed(slot, value); if (retval < 0) @@ -320,15 +331,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); if (!ctrl) { - err("%s : out of memory\n", __func__); + dev_err(&pdev->dev, "%s : out of memory\n", __func__); goto err_out_none; } INIT_LIST_HEAD(&ctrl->slot_list); rc = shpc_init(ctrl, pdev); if (rc) { - dbg("%s: controller initialization failed\n", - SHPC_MODULE_NAME); + ctrl_dbg(ctrl, "controller initialization failed\n"); goto err_out_free_ctrl; } @@ -337,7 +347,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { - err("%s: slot initialization failed\n", SHPC_MODULE_NAME); + ctrl_err(ctrl, "slot initialization failed\n"); goto err_out_release_ctlr; } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 919b1ee44313..c9049f17864e 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -62,7 +62,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) u32 event_type; /* Attention Button Change */ - dbg("shpchp: Attention button interrupt received.\n"); + ctrl_dbg(ctrl, "Attention button interrupt received.\n"); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); @@ -70,7 +70,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) /* * Button pressed - See if need to TAKE ACTION!!! */ - info("Button pressed on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot)); event_type = INT_BUTTON_PRESS; queue_interrupt_event(p_slot, event_type); @@ -86,29 +86,29 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) u32 event_type; /* Switch Change */ - dbg("shpchp: Switch interrupt received.\n"); + ctrl_dbg(ctrl, "Switch interrupt received.\n"); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - dbg("%s: Card present %x Power status %x\n", __func__, - p_slot->presence_save, p_slot->pwr_save); + ctrl_dbg(ctrl, "%s: Card present %x Power status %x\n", + __func__, p_slot->presence_save, p_slot->pwr_save); if (getstatus) { /* * Switch opened */ - info("Latch open on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_OPEN; if (p_slot->pwr_save && p_slot->presence_save) { event_type = INT_POWER_FAULT; - err("Surprise Removal of card\n"); + ctrl_err(ctrl, "Surprise Removal of card\n"); } } else { /* * Switch closed */ - info("Latch close on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_CLOSE; } @@ -123,7 +123,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) u32 event_type; /* Presence Change */ - dbg("shpchp: Presence/Notify input change.\n"); + ctrl_dbg(ctrl, "Presence/Notify input change.\n"); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); @@ -135,13 +135,15 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) /* * Card Present */ - info("Card present on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Card present on Slot(%s)\n", + slot_name(p_slot)); event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - info("Card not present on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Card not present on Slot(%s)\n", + slot_name(p_slot)); event_type = INT_PRESENCE_OFF; } @@ -156,7 +158,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) u32 event_type; /* Power fault */ - dbg("shpchp: Power fault interrupt received.\n"); + ctrl_dbg(ctrl, "Power fault interrupt received.\n"); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); @@ -164,18 +166,19 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) /* * Power fault Cleared */ - info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n", + slot_name(p_slot)); p_slot->status = 0x00; event_type = INT_POWER_FAULT_CLEAR; } else { /* * Power fault */ - info("Power fault on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); event_type = INT_POWER_FAULT; /* set power fault status for this board */ p_slot->status = 0xFF; - info("power fault bit %x set\n", hp_slot); + ctrl_info(ctrl, "power fault bit %x set\n", hp_slot); } queue_interrupt_event(p_slot, event_type); @@ -191,10 +194,10 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, { int rc = 0; - dbg("%s: change to speed %d\n", __func__, speed); + ctrl_dbg(ctrl, "%s: change to speed %d\n", __func__, speed); if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { - err("%s: Issue of set bus speed mode command failed\n", - __func__); + ctrl_err(ctrl, "%s: Issue of set bus speed mode command " + "failed\n", __func__); return WRONG_BUS_FREQUENCY; } return rc; @@ -212,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, */ if (flag) { if (asp < bsp) { - err("%s: speed of bus %x and adapter %x mismatch\n", - __func__, bsp, asp); + ctrl_err(ctrl, "%s: speed of bus %x and adapter %x " + "mismatch\n", __func__, bsp, asp); rc = WRONG_BUS_FREQUENCY; } return rc; @@ -246,14 +249,14 @@ static int board_added(struct slot *p_slot) hp_slot = p_slot->device - ctrl->slot_device_offset; - dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", - __func__, p_slot->device, - ctrl->slot_device_offset, hp_slot); + ctrl_dbg(ctrl, + "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", + __func__, p_slot->device, ctrl->slot_device_offset, hp_slot); /* Power on slot without connecting to bus */ rc = p_slot->hpc_ops->power_on_slot(p_slot); if (rc) { - err("%s: Failed to power on slot\n", __func__); + ctrl_err(ctrl, "%s: Failed to power on slot\n", __func__); return -1; } @@ -262,33 +265,36 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { - err("%s: Issue of set bus speed mode command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of set bus speed mode command" + " failed\n", __func__); return WRONG_BUS_FREQUENCY; } /* turn on board, blink green LED, turn off Amber LED */ if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { - err("%s: Issue of Slot Enable command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of Slot Enable command" + " failed\n", __func__); return rc; } } rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); if (rc) { - err("%s: Can't get adapter speed or bus mode mismatch\n", - __func__); + ctrl_err(ctrl, "%s: Can't get adapter speed or bus mode " + "mismatch\n", __func__); return WRONG_BUS_FREQUENCY; } rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); if (rc) { - err("%s: Can't get bus operation speed\n", __func__); + ctrl_err(ctrl, "%s: Can't get bus operation speed\n", __func__); return WRONG_BUS_FREQUENCY; } rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); if (rc) { - err("%s: Can't get max bus operation speed\n", __func__); + ctrl_err(ctrl, "%s: Can't get max bus operation speed\n", + __func__); msp = bsp; } @@ -296,9 +302,9 @@ static int board_added(struct slot *p_slot) if (!list_empty(&ctrl->pci_dev->subordinate->devices)) slots_not_empty = 1; - dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, " - "max_bus_speed %d\n", __func__, slots_not_empty, asp, - bsp, msp); + ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d," + " max_bus_speed %d\n", __func__, slots_not_empty, asp, + bsp, msp); rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); if (rc) @@ -306,26 +312,27 @@ static int board_added(struct slot *p_slot) /* turn on board, blink green LED, turn off Amber LED */ if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { - err("%s: Issue of Slot Enable command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of Slot Enable command failed\n", + __func__); return rc; } /* Wait for ~1 second */ msleep(1000); - dbg("%s: slot status = %x\n", __func__, p_slot->status); + ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status); /* Check for a power fault */ if (p_slot->status == 0xFF) { /* power fault occurred, but it was benign */ - dbg("%s: power fault\n", __func__); + ctrl_dbg(ctrl, "%s: power fault\n", __func__); rc = POWER_FAILURE; p_slot->status = 0; goto err_exit; } if (shpchp_configure_device(p_slot)) { - err("Cannot add device at 0x%x:0x%x\n", p_slot->bus, - p_slot->device); + ctrl_err(ctrl, "Cannot add device at 0x%x:0x%x\n", + p_slot->bus, p_slot->device); goto err_exit; } @@ -341,7 +348,8 @@ err_exit: /* turn off slot, turn on Amber LED, turn off Green LED */ rc = p_slot->hpc_ops->slot_disable(p_slot); if (rc) { - err("%s: Issue of Slot Disable command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", + __func__); return rc; } @@ -365,7 +373,7 @@ static int remove_board(struct slot *p_slot) hp_slot = p_slot->device - ctrl->slot_device_offset; p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("In %s, hp_slot = %d\n", __func__, hp_slot); + ctrl_dbg(ctrl, "In %s, hp_slot = %d\n", __func__, hp_slot); /* Change status to shutdown */ if (p_slot->is_a_board) @@ -374,13 +382,15 @@ static int remove_board(struct slot *p_slot) /* turn off slot, turn on Amber LED, turn off Green LED */ rc = p_slot->hpc_ops->slot_disable(p_slot); if (rc) { - err("%s: Issue of Slot Disable command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", + __func__); return rc; } rc = p_slot->hpc_ops->set_attention_status(p_slot, 0); if (rc) { - err("%s: Issue of Set Attention command failed\n", __func__); + ctrl_err(ctrl, "%s: Issue of Set Attention command failed\n", + __func__); return rc; } @@ -439,7 +449,8 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) { - err("%s: Cannot allocate memory\n", __func__); + ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n", + __func__); return; } info->p_slot = p_slot; @@ -486,18 +497,19 @@ static int update_slot_info (struct slot *slot) static void handle_button_press_event(struct slot *p_slot) { u8 getstatus; + struct controller *ctrl = p_slot->ctrl; switch (p_slot->state) { case STATIC_STATE: p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = BLINKINGOFF_STATE; - info("PCI slot #%s - powering off due to button " - "press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering off due to " + "button press.\n", slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; - info("PCI slot #%s - powering on due to button " - "press.\n", slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - powering on due to " + "button press.\n", slot_name(p_slot)); } /* blink green LED and turn off amber */ p_slot->hpc_ops->green_led_blink(p_slot); @@ -512,16 +524,17 @@ static void handle_button_press_event(struct slot *p_slot) * press the attention again before the 5 sec. limit * expires to cancel hot-add or hot-remove */ - info("Button cancel on Slot(%s)\n", slot_name(p_slot)); - dbg("%s: button cancel\n", __func__); + ctrl_info(ctrl, "Button cancel on Slot(%s)\n", + slot_name(p_slot)); + ctrl_dbg(ctrl, "%s: button cancel\n", __func__); cancel_delayed_work(&p_slot->work); if (p_slot->state == BLINKINGOFF_STATE) p_slot->hpc_ops->green_led_on(p_slot); else p_slot->hpc_ops->green_led_off(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); - info("PCI slot #%s - action canceled due to button press\n", - slot_name(p_slot)); + ctrl_info(ctrl, "PCI slot #%s - action canceled due to " + "button press\n", slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: @@ -531,11 +544,12 @@ static void handle_button_press_event(struct slot *p_slot) * this means that the previous attention button action * to hot-add or hot-remove is undergoing */ - info("Button ignore on Slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Button ignore on Slot(%s)\n", + slot_name(p_slot)); update_slot_info(p_slot); break; default: - warn("Not a valid state\n"); + ctrl_warn(ctrl, "Not a valid state\n"); break; } } @@ -551,7 +565,7 @@ static void interrupt_event_handler(struct work_struct *work) handle_button_press_event(p_slot); break; case INT_POWER_FAULT: - dbg("%s: power fault\n", __func__); + ctrl_dbg(p_slot->ctrl, "%s: power fault\n", __func__); p_slot->hpc_ops->set_attention_status(p_slot, 1); p_slot->hpc_ops->green_led_off(p_slot); break; @@ -569,22 +583,24 @@ static int shpchp_enable_slot (struct slot *p_slot) { u8 getstatus = 0; int rc, retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; /* Check to see if (latch closed, card present, power off) */ mutex_lock(&p_slot->ctrl->crit_sect); rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { - info("Already enabled on slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Already enabled on slot(%s)\n", + slot_name(p_slot)); goto out; } @@ -593,7 +609,7 @@ static int shpchp_enable_slot (struct slot *p_slot) /* We have to save the presence info for these slots */ p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); - dbg("%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save); + ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) || @@ -624,6 +640,7 @@ static int shpchp_disable_slot (struct slot *p_slot) { u8 getstatus = 0; int rc, retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; if (!p_slot->ctrl) return -ENODEV; @@ -633,17 +650,18 @@ static int shpchp_disable_slot (struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || !getstatus) { - info("Already disabled slot(%s)\n", slot_name(p_slot)); + ctrl_info(ctrl, "Already disabled slot(%s)\n", + slot_name(p_slot)); goto out; } @@ -657,6 +675,7 @@ static int shpchp_disable_slot (struct slot *p_slot) int shpchp_sysfs_enable_slot(struct slot *p_slot) { int retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; mutex_lock(&p_slot->lock); switch (p_slot->state) { @@ -670,15 +689,17 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) p_slot->state = STATIC_STATE; break; case POWERON_STATE: - info("Slot %s is already in powering on state\n", - slot_name(p_slot)); + ctrl_info(ctrl, "Slot %s is already in powering on state\n", + slot_name(p_slot)); break; case BLINKINGOFF_STATE: case POWEROFF_STATE: - info("Already enabled on slot %s\n", slot_name(p_slot)); + ctrl_info(ctrl, "Already enabled on slot %s\n", + slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", slot_name(p_slot)); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); @@ -689,6 +710,7 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) int shpchp_sysfs_disable_slot(struct slot *p_slot) { int retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; mutex_lock(&p_slot->lock); switch (p_slot->state) { @@ -702,15 +724,17 @@ int shpchp_sysfs_disable_slot(struct slot *p_slot) p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: - info("Slot %s is already in powering off state\n", - slot_name(p_slot)); + ctrl_info(ctrl, "Slot %s is already in powering off state\n", + slot_name(p_slot)); break; case BLINKINGON_STATE: case POWERON_STATE: - info("Already disabled on slot %s\n", slot_name(p_slot)); + ctrl_info(ctrl, "Already disabled on slot %s\n", + slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", slot_name(p_slot)); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 7a0bff364cd4..2b69a08326b7 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -300,10 +300,10 @@ static inline int shpc_wait_cmd(struct controller *ctrl) !is_ctrl_busy(ctrl), timeout); if (!rc && is_ctrl_busy(ctrl)) { retval = -EIO; - err("Command not completed in 1000 msec\n"); + ctrl_err(ctrl, "Command not completed in 1000 msec\n"); } else if (rc < 0) { retval = -EINTR; - info("Command was interrupted by a signal\n"); + ctrl_info(ctrl, "Command was interrupted by a signal\n"); } return retval; @@ -320,15 +320,15 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) if (!shpc_poll_ctrl_busy(ctrl)) { /* After 1 sec and and the controller is still busy */ - err("%s : Controller is still busy after 1 sec.\n", - __func__); + ctrl_err(ctrl, "%s : Controller is still busy after 1 sec.\n", + __func__); retval = -EBUSY; goto out; } ++t_slot; temp_word = (t_slot << 8) | (cmd & 0xFF); - dbg("%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); + ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); /* To make sure the Controller Busy bit is 0 before we send out the * command. @@ -344,8 +344,8 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) cmd_status = hpc_check_cmd_status(slot->ctrl); if (cmd_status) { - err("%s: Failed to issued command 0x%x (error code = %d)\n", - __func__, cmd, cmd_status); + ctrl_err(ctrl, "%s: Failed to issued command 0x%x " + "(error code = %d)\n", __func__, cmd, cmd_status); retval = -EIO; } out: @@ -364,15 +364,15 @@ static int hpc_check_cmd_status(struct controller *ctrl) break; case 1: retval = SWITCH_OPEN; - err("%s: Switch opened!\n", __func__); + ctrl_err(ctrl, "%s: Switch opened!\n", __func__); break; case 2: retval = INVALID_CMD; - err("%s: Invalid HPC command!\n", __func__); + ctrl_err(ctrl, "%s: Invalid HPC command!\n", __func__); break; case 4: retval = INVALID_SPEED_MODE; - err("%s: Invalid bus speed/mode!\n", __func__); + ctrl_err(ctrl, "%s: Invalid bus speed/mode!\n", __func__); break; default: retval = cmd_status; @@ -483,8 +483,8 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) return -ENODEV; } - dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", - __func__, slot_reg, pcix_cap, m66_cap); + ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", + __func__, slot_reg, pcix_cap, m66_cap); switch (pcix_cap) { case 0x0: @@ -509,7 +509,7 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) break; } - dbg("Adapter speed = %d\n", *value); + ctrl_dbg(ctrl, "Adapter speed = %d\n", *value); return retval; } @@ -526,7 +526,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) retval = -1; } - dbg("Mode 1 ECC cap = %d\n", *mode); + ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode); return retval; } @@ -629,7 +629,7 @@ static int hpc_power_on_slot(struct slot * slot) retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR); if (retval) - err("%s: Write command failed!\n", __func__); + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); return retval; } @@ -642,7 +642,7 @@ static int hpc_slot_enable(struct slot * slot) retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF); if (retval) - err("%s: Write command failed!\n", __func__); + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); return retval; } @@ -655,7 +655,7 @@ static int hpc_slot_disable(struct slot * slot) retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON); if (retval) - err("%s: Write command failed!\n", __func__); + ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); return retval; } @@ -719,7 +719,7 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) retval = shpc_write_cmd(slot, 0, cmd); if (retval) - err("%s: Write command failed!\n", __func__); + ctrl_err(ctrl, "%s: Write command failed!\n", __func__); return retval; } @@ -735,7 +735,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) if (!intr_loc) return IRQ_NONE; - dbg("%s: intr_loc = %x\n",__func__, intr_loc); + ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc); if(!shpchp_poll_mode) { /* @@ -748,7 +748,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); intr_loc2 = shpc_readl(ctrl, INTR_LOC); - dbg("%s: intr_loc2 = %x\n",__func__, intr_loc2); + ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2); } if (intr_loc & CMD_INTR_PENDING) { @@ -773,8 +773,8 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) continue; slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); - dbg("%s: Slot %x with intr, slot register = %x\n", - __func__, hp_slot, slot_reg); + ctrl_dbg(ctrl, "%s: Slot %x with intr, slot register = %x\n", + __func__, hp_slot, slot_reg); if (slot_reg & MRL_CHANGE_DETECTED) shpchp_handle_switch_change(hp_slot, ctrl); @@ -843,7 +843,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) } *value = bus_speed; - dbg("Max bus speed = %d\n", bus_speed); + ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); return retval; } @@ -911,7 +911,7 @@ static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) break; } - dbg("Current bus speed = %d\n", bus_speed); + ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); return retval; } @@ -958,34 +958,38 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) } else { ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC); if (!ctrl->cap_offset) { - err("%s : cap_offset == 0\n", __func__); + ctrl_err(ctrl, "%s : cap_offset == 0\n", __func__); goto abort; } - dbg("%s: cap_offset = %x\n", __func__, ctrl->cap_offset); + ctrl_dbg(ctrl, "%s: cap_offset = %x\n", __func__, + ctrl->cap_offset); rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset); if (rc) { - err("%s: cannot read base_offset\n", __func__); + ctrl_err(ctrl, "%s: cannot read base_offset\n", + __func__); goto abort; } rc = shpc_indirect_read(ctrl, 3, &tempdword); if (rc) { - err("%s: cannot read slot config\n", __func__); + ctrl_err(ctrl, "%s: cannot read slot config\n", + __func__); goto abort; } num_slots = tempdword & SLOT_NUM; - dbg("%s: num_slots (indirect) %x\n", __func__, num_slots); + ctrl_dbg(ctrl, "%s: num_slots (indirect) %x\n", + __func__, num_slots); for (i = 0; i < 9 + num_slots; i++) { rc = shpc_indirect_read(ctrl, i, &tempdword); if (rc) { - err("%s: cannot read creg (index = %d)\n", - __func__, i); + ctrl_err(ctrl, "%s: cannot read creg " + "(index = %d)\n", __func__, i); goto abort; } - dbg("%s: offset %d: value %x\n", __func__,i, - tempdword); + ctrl_dbg(ctrl, "%s: offset %d: value %x\n", + __func__, i, tempdword); } ctrl->mmio_base = @@ -993,30 +997,31 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) ctrl->mmio_size = 0x24 + 0x4 * num_slots; } - info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, - pdev->subsystem_device); + ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", + pdev->vendor, pdev->device, pdev->subsystem_vendor, + pdev->subsystem_device); rc = pci_enable_device(pdev); if (rc) { - err("%s: pci_enable_device failed\n", __func__); + ctrl_err(ctrl, "%s: pci_enable_device failed\n", __func__); goto abort; } if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { - err("%s: cannot reserve MMIO region\n", __func__); + ctrl_err(ctrl, "%s: cannot reserve MMIO region\n", __func__); rc = -1; goto abort; } ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size); if (!ctrl->creg) { - err("%s: cannot remap MMIO region %lx @ %lx\n", __func__, - ctrl->mmio_size, ctrl->mmio_base); + ctrl_err(ctrl, "%s: cannot remap MMIO region %lx @ %lx\n", + __func__, ctrl->mmio_size, ctrl->mmio_base); release_mem_region(ctrl->mmio_base, ctrl->mmio_size); rc = -1; goto abort; } - dbg("%s: ctrl->creg %p\n", __func__, ctrl->creg); + ctrl_dbg(ctrl, "%s: ctrl->creg %p\n", __func__, ctrl->creg); mutex_init(&ctrl->crit_sect); mutex_init(&ctrl->cmd_lock); @@ -1035,21 +1040,21 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); - dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); + ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | COMMAND_INTR_MASK | ARBITER_SERR_MASK); tempdword &= ~SERR_INTR_RSVDZ_MASK; shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); - dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); + ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); /* Mask the MRL sensor SERR Mask of individual slot in * Slot SERR-INT Mask & clear all the existing event if any */ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); - dbg("%s: Default Logical Slot Register %d value %x\n", __func__, - hp_slot, slot_reg); + ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d " + "value %x\n", __func__, hp_slot, slot_reg); slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | @@ -1066,24 +1071,26 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) /* Installs the interrupt handler */ rc = pci_enable_msi(pdev); if (rc) { - info("Can't get msi for the hotplug controller\n"); - info("Use INTx for the hotplug controller\n"); + ctrl_info(ctrl, + "Can't get msi for the hotplug controller\n"); + ctrl_info(ctrl, + "Use INTx for the hotplug controller\n"); } rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, MY_NAME, (void *)ctrl); - dbg("%s: request_irq %d for hpc%d (returns %d)\n", - __func__, ctrl->pci_dev->irq, + ctrl_dbg(ctrl, "%s: request_irq %d for hpc%d (returns %d)\n", + __func__, ctrl->pci_dev->irq, atomic_read(&shpchp_num_controllers), rc); if (rc) { - err("Can't get irq %d for the hotplug controller\n", - ctrl->pci_dev->irq); + ctrl_err(ctrl, "Can't get irq %d for the hotplug " + "controller\n", ctrl->pci_dev->irq); goto abort_iounmap; } } - dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__, - pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); + ctrl_dbg(ctrl, "%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", + __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), + PCI_FUNC(pdev->devfn), pdev->irq); /* * If this is the first controller to be initialized, @@ -1102,8 +1109,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) */ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); - dbg("%s: Default Logical Slot Register %d value %x\n", __func__, - hp_slot, slot_reg); + ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d " + "value %x\n", __func__, hp_slot, slot_reg); slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK); @@ -1116,7 +1123,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) SERR_INTR_RSVDZ_MASK); shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); - dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); + ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", + __func__, tempdword); } return 0; diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 3fc4ec0eea0b..faecbfaa64f0 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -101,18 +101,20 @@ int __ref shpchp_configure_device(struct slot *p_slot) struct pci_dev *dev; struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; int num, fn; + struct controller *ctrl = p_slot->ctrl; dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); if (dev) { - err("Device %s already exists at %x:%x, cannot hot-add\n", - pci_name(dev), p_slot->bus, p_slot->device); + ctrl_err(ctrl, + "Device %s already exists at %x:%x, cannot hot-add\n", + pci_name(dev), p_slot->bus, p_slot->device); pci_dev_put(dev); return -EINVAL; } num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0)); if (num == 0) { - err("No new device found\n"); + ctrl_err(ctrl, "No new device found\n"); return -ENODEV; } @@ -121,8 +123,8 @@ int __ref shpchp_configure_device(struct slot *p_slot) if (!dev) continue; if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - err("Cannot hot-add display device %s\n", - pci_name(dev)); + ctrl_err(ctrl, "Cannot hot-add display device %s\n", + pci_name(dev)); pci_dev_put(dev); continue; } @@ -138,14 +140,15 @@ int __ref shpchp_configure_device(struct slot *p_slot) break; } if (busnr >= end) { - err("No free bus for hot-added bridge\n"); + ctrl_err(ctrl, + "No free bus for hot-added bridge\n"); pci_dev_put(dev); continue; } child = pci_add_new_bus(parent, dev, busnr); if (!child) { - err("Cannot add new bus for %s\n", - pci_name(dev)); + ctrl_err(ctrl, "Cannot add new bus for %s\n", + pci_name(dev)); pci_dev_put(dev); continue; } @@ -168,8 +171,10 @@ int shpchp_unconfigure_device(struct slot *p_slot) int j; u8 bctl = 0; struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; + struct controller *ctrl = p_slot->ctrl; - dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus, p_slot->device); + ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n", + __func__, p_slot->bus, p_slot->device); for (j=0; j<8 ; j++) { struct pci_dev* temp = pci_get_slot(parent, @@ -177,16 +182,17 @@ int shpchp_unconfigure_device(struct slot *p_slot) if (!temp) continue; if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - err("Cannot remove display device %s\n", - pci_name(temp)); + ctrl_err(ctrl, "Cannot remove display device %s\n", + pci_name(temp)); pci_dev_put(temp); continue; } if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); if (bctl & PCI_BRIDGE_CTL_VGA) { - err("Cannot remove display device %s\n", - pci_name(temp)); + ctrl_err(ctrl, + "Cannot remove display device %s\n", + pci_name(temp)); pci_dev_put(temp); continue; }