From: Antti Palosaari Date: Thu, 21 Jun 2012 01:22:14 +0000 (-0300) Subject: [media] dvb_usb_v2: update header dvb_usb.h comments X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f93c80288730427c461d6db573411ca50683bd44;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [media] dvb_usb_v2: update header dvb_usb.h comments Comment briefly all used structures and variables. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/dvb_usb.h b/drivers/media/dvb/dvb-usb/dvb_usb.h index d771e1c72737..7d7647d385a6 100644 --- a/drivers/media/dvb/dvb-usb/dvb_usb.h +++ b/drivers/media/dvb/dvb-usb/dvb_usb.h @@ -4,8 +4,6 @@ * see dvb-usb-init.c for copyright information. * * the headerfile, all dvb-usb-drivers have to include. - * - * TODO: clean-up the structures for unused fields and update the comments */ #ifndef DVB_USB_H #define DVB_USB_H @@ -20,6 +18,28 @@ #include "dmxdev.h" #include "dvb-usb-ids.h" +/* + * device file: /dev/dvb/adapter[0-1]/frontend[0-2] + * + * |-- device + * | |-- adapter0 + * | | |-- frontend0 + * | | |-- frontend1 + * | | `-- frontend2 + * | `-- adapter1 + * | |-- frontend0 + * | |-- frontend1 + * | `-- frontend2 + * + * + * Commonly used variable names: + * d = pointer to device (struct dvb_usb_device *) + * adap = pointer to adapter (struct dvb_usb_adapter *) + * fe = pointer to frontend (struct dvb_frontend *) + * + * Use macros defined in that file to resolve needed pointers. + */ + /* helper macros for every DVB USB driver use */ #define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \ adapter[adap->id])) @@ -66,6 +86,13 @@ struct dvb_usb_device; struct dvb_usb_adapter; +/** + * structure for carrying all needed data from the device driver to the general + * dvb usb routines + * @name: device name + * @rc_map: name of rc codes table + * @props: structure containing all device properties + */ struct dvb_usb_driver_info { const char *name; const char *rc_map; @@ -73,15 +100,14 @@ struct dvb_usb_driver_info { }; /** - * struct dvb_rc properties of remote controller, using rc-core - * @rc_codes: name of rc codes table - * @protocol: type of protocol(s) currently used by the driver + * structure for remote controller configuration + * @map_name: name of rc codes table * @allowed_protos: protocol(s) supported by the driver - * @driver_type: Used to point if a device supports raw mode * @change_protocol: callback to change protocol - * @rc_query: called to query an event event. - * @rc_interval: time in ms between two queries. - * @bulk_mode: device supports bulk mode for RC (disable polling mode) + * @query: called to query an event from the device + * @interval: time in ms between two queries + * @driver_type: used to point if a device supports raw mode + * @bulk_mode: device supports bulk mode for rc (disable polling mode) */ struct dvb_usb_rc { char *map_name; @@ -94,9 +120,10 @@ struct dvb_usb_rc { }; /** - * Properties of USB streaming - TODO this structure should be somewhere else - * describes the kind of USB transfer used for data-streaming. - * (BULK or ISOC) + * usb streaming configration for adapter + * @type: urb type + * @count: count of used urbs + * @endpoint: stream usb endpoint number */ struct usb_data_stream_properties { #define USB_BULK 1 @@ -118,25 +145,13 @@ struct usb_data_stream_properties { }; /** - * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter. - * A DVB-USB-Adapter is basically a dvb_adapter which is present on a - * USB-device. - * @caps: capabilities of the DVB USB device. - * @pid_filter_count: number of PID filter position in the optional hardware - * PID-filter. - * @num_frontends: number of frontends of the DVB USB adapter. - * @frontend_ctrl: called to power on/off active frontend. - * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the - * device (not URB submitting/killing). - * @pid_filter_ctrl: called to en/disable the PID filter, if any. - * @pid_filter: called to set/unset a PID for filtering. - * @frontend_attach: called to attach the possible frontends (fill fe-field - * of struct dvb_usb_device). - * @tuner_attach: called to attach the correct tuner and to fill pll_addr, - * pll_desc and pll_init_buf of struct dvb_usb_device). - * @stream: configuration of the USB streaming + * properties of dvb usb device adapter + * @caps: adapter capabilities + * @pid_filter_count: pid count of adapter pid-filter + * @pid_filter_ctrl: called to enable/disable pid-filter + * @pid_filter: called to set/unset pid for filtering + * @stream: adapter usb stream configuration */ - #define MAX_NO_OF_FE_PER_ADAP 3 struct dvb_usb_adapter_properties { #define DVB_USB_ADAP_HAS_PID_FILTER 0x01 @@ -153,39 +168,38 @@ struct dvb_usb_adapter_properties { /** * struct dvb_usb_device_properties - properties of a dvb-usb-device + * @driver_name: name of the owning driver module * @owner: owner of the dvb_adapter - * @usb_ctrl: which USB device-side controller is in use. Needed for firmware - * download. - * @firmware: name of the firmware file. - * @download_firmware: called to download the firmware when the usb_ctrl is - * DEVICE_SPECIFIC. - * @no_reconnect: device doesn't do a reconnect after downloading the firmware, - * so do the warm initialization right after it - * - * @size_of_priv: how many bytes shall be allocated for the private field - * of struct dvb_usb_device. - * - * @power_ctrl: called to enable/disable power of the device. - * @read_mac_address: called to read the MAC address of the device. - * @identify_state: called to determine the state (cold or warm), when it - * is not distinguishable by the USB IDs. + * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro + * @bInterfaceNumber: usb interface number driver binds + * @size_of_priv: bytes allocated for the driver private data + * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent + * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for + * receive + * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message + * @identify_state: called to determine the firmware state (cold or warm) and + * return possible firmware file name to be loaded + * @firmware: name of the firmware file to be loaded + * @download_firmware: called to download the firmware + * @i2c_algo: i2c_algorithm if the device has i2c-adapter + * @num_adapters: dvb usb device adapter count + * @get_adapter_count: called to resolve adapter count + * @adapter: array of all adapter properties of device + * @power_ctrl: called to enable/disable power of the device + * @read_config: called to resolve device configuration + * @read_mac_address: called to resolve adapter mac-address + * @frontend_attach: called to attach the possible frontends + * @tuner_attach: called to attach the possible tuners + * @frontend_ctrl: called to power on/off active frontend + * @streaming_ctrl: called to start/stop the usb streaming of adapter + * @fe_ioctl_override: frontend ioctl override. avoid using that is possible * @init: called after adapters are created in order to finalize device - * configuration. - * - * @rc: remote controller properties - * - * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. - * - * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic - * endpoint which received control messages with bulk transfers. When this - * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- - * helper functions. - * - * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate - * endpoint for responses to control messages sent with bulk transfers via - * the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used - * instead of the generic_bulk_ctrl_endpoint when reading usb responses in - * the dvb_usb_generic_rw helper function. + * configuration + * @exit: called when driver is unloaded + * @get_rc_config: called to resolve used remote controller configuration + * @get_stream_config: called to resolve input and output stream configuration + * of the adapter just before streaming is started. input stream is transport + * stream from the demodulator and output stream is usb stream to host. */ #define MAX_NO_OF_ADAPTER_PER_DEVICE 2 struct dvb_usb_device_properties { @@ -210,8 +224,8 @@ struct dvb_usb_device_properties { struct i2c_algorithm *i2c_algo; unsigned int num_adapters; - struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; int (*get_adapter_count) (struct dvb_usb_device *); + struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; int (*power_ctrl) (struct dvb_usb_device *, int); int (*read_config) (struct dvb_usb_device *d); int (*read_mac_address) (struct dvb_usb_adapter *, u8 []); @@ -232,14 +246,14 @@ struct dvb_usb_device_properties { }; /** - * struct usb_data_stream - generic object of an USB stream - * @buf_num: number of buffer allocated. - * @buf_size: size of each buffer in buf_list. - * @buf_list: array containing all allocate buffers for streaming. - * @dma_addr: list of dma_addr_t for each buffer in buf_list. + * generic object of an usb stream + * @buf_num: number of buffer allocated + * @buf_size: size of each buffer in buf_list + * @buf_list: array containing all allocate buffers for streaming + * @dma_addr: list of dma_addr_t for each buffer in buf_list * - * @urbs_initialized: number of URBs initialized. - * @urbs_submitted: number of URBs submitted. + * @urbs_initialized: number of URBs initialized + * @urbs_submitted: number of URBs submitted */ #define MAX_NO_URBS_FOR_DATA_STREAM 10 struct usb_data_stream { @@ -265,30 +279,22 @@ struct usb_data_stream { }; /** - * struct dvb_usb_adapter - a DVB adapter on a USB device - * @id: index of this adapter (starting with 0). - * - * @feedcount: number of reqested feeds (used for streaming-activation) - * @pid_filtering: is hardware pid_filtering used or not. - * - * @pll_addr: I2C address of the tuner for programming - * @pll_init: array containing the initialization buffer - * @pll_desc: pointer to the appropriate struct dvb_pll_desc - * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or - * the board - * - * @dvb_adap: device's dvb_adapter. - * @dmxdev: device's dmxdev. - * @demux: device's software demuxer. - * @dvb_net: device's dvb_net interfaces. - * @dvb_frontend: device's frontend. - * @max_feed_count: how many feeds can be handled simultaneously by this - * device - * - * @fe_init: rerouted frontend-init (wakeup) function. - * @fe_sleep: rerouted frontend-sleep function. - * - * @stream: the usb data stream. + * dvb adapter object on dvb usb device + * @props: pointer to adapter properties + * @stream: adapter the usb data stream + * @id: index of this adapter (starting with 0) + * @ts_type: transport stream, input stream, type + * @pid_filtering: is hardware pid_filtering used or not + * @feed_count: current feed count + * @max_feed_count: maimum feed count device can handle + * @dvb_adap: adapter dvb_adapter + * @dmxdev: adapter dmxdev + * @demux: adapter software demuxer + * @dvb_net: adapter dvb_net interfaces + * @sync_mutex: mutex used to sync control and streaming of the adapter + * @fe: adapter frontends + * @fe_init: rerouted frontend-init function + * @fe_sleep: rerouted frontend-sleep function */ struct dvb_usb_adapter { const struct dvb_usb_adapter_properties *props; @@ -313,26 +319,23 @@ struct dvb_usb_adapter { }; /** - * struct dvb_usb_device - object of a DVB USB device - * @props: copy of the struct dvb_usb_properties this device belongs to. - * @desc: pointer to the device's struct dvb_usb_device_description. - * @state: initialization and runtime state of the device. - * - * @powered: indicated whether the device is power or not. - * Powered is in/decremented for each call to modify the state. - * @udev: pointer to the device's struct usb_device. - * - * @usb_mutex: semaphore of USB control messages (reading needs two messages) - * @i2c_mutex: semaphore for i2c-transfers - * - * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB + * dvb usb device object + * @props: device properties + * @name: device name + * @rc_map: name of rc codes table + * @udev: pointer to the device's struct usb_device + * @intf: pointer to the device's usb interface + * @rc: remote controller configuration + * @probe_work: work to defer .probe() + * @powered: indicated whether the device is power or not + * @usb_mutex: mutex for usb control messages + * @i2c_mutex: mutex for i2c-transfers + * @i2c_adap: device's i2c-adapter * - * @rc_dev: rc device for the remote control (rc-core mode) + * @rc_dev: rc device for the remote control * @input_dev: input device for the remote control (legacy mode) - * @rc_query_work: struct work_struct frequent rc queries - * @last_event: last triggered event - * @last_state: last state (no, pressed, repeat) - * @priv: private data of the actual driver (allocate by dvb-usb, size defined + * @rc_query_work: work for polling remote + * @priv: private data of the actual driver (allocate by dvb usb, size defined * in size_of_priv of dvb_usb_properties). */ struct dvb_usb_device {