From: Varka Bhadram Date: Mon, 14 Jul 2014 08:39:06 +0000 (+0530) Subject: ethernet: amd: dynamic debug fixes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f7afbaa557337d059603ef8c3519831c9e0d1591;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ethernet: amd: dynamic debug fixes This patch convert printk() to netdev_dbg/info/err or dev_info/err/dbg Signed-off-by: Varka Bhadram Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c index 433107c3cd2b..c322aa77ad1c 100644 --- a/drivers/net/ethernet/amd/amd8111e.c +++ b/drivers/net/ethernet/amd/amd8111e.c @@ -501,8 +501,7 @@ static int amd8111e_restart(struct net_device *dev) /* Enable interrupt coalesce */ if(lp->options & OPTION_INTR_COAL_ENABLE){ - printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n", - dev->name); + netdev_info(dev, "Interrupt Coalescing Enabled.\n"); amd8111e_set_coalesce(dev,ENABLE_COAL); } @@ -860,16 +859,19 @@ static int amd8111e_link_change(struct net_device* dev) else if(speed == PHY_SPEED_100) lp->link_config.speed = SPEED_100; - printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n", dev->name, - (lp->link_config.speed == SPEED_100) ? "100": "10", - (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half"); + netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", + (lp->link_config.speed == SPEED_100) ? + "100" : "10", + (lp->link_config.duplex == DUPLEX_FULL) ? + "Full" : "Half"); + netif_carrier_on(dev); } else{ lp->link_config.speed = SPEED_INVALID; lp->link_config.duplex = DUPLEX_INVALID; lp->link_config.autoneg = AUTONEG_INVALID; - printk(KERN_INFO "%s: Link is Down.\n",dev->name); + netdev_info(dev, "Link is Down.\n"); netif_carrier_off(dev); } @@ -1168,7 +1170,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) /* Schedule a polling routine */ __napi_schedule(&lp->napi); } else if (intren0 & RINTEN0) { - printk("************Driver bug! interrupt while in poll\n"); + netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); /* Fix by disable receive interrupts */ writel(RINTEN0, mmio + INTEN0); } @@ -1264,7 +1266,7 @@ static int amd8111e_open(struct net_device * dev ) /* Start ipg timer */ if(lp->options & OPTION_DYN_IPG_ENABLE){ add_timer(&lp->ipg_data.ipg_timer); - printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name); + netdev_info(dev, "Dynamic IPG Enabled\n"); } lp->opened = 1; @@ -1623,8 +1625,8 @@ static void amd8111e_tx_timeout(struct net_device *dev) struct amd8111e_priv* lp = netdev_priv(dev); int err; - printk(KERN_ERR "%s: transmit timed out, resetting\n", - dev->name); + netdev_err(dev, "transmit timed out, resetting\n"); + spin_lock_irq(&lp->lock); err = amd8111e_restart(dev); spin_unlock_irq(&lp->lock); @@ -1807,22 +1809,19 @@ static int amd8111e_probe_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if(err){ - printk(KERN_ERR "amd8111e: Cannot enable new PCI device, " - "exiting.\n"); + dev_err(&pdev->dev, "Cannot enable new PCI device\n"); return err; } if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ - printk(KERN_ERR "amd8111e: Cannot find PCI base address, " - "exiting.\n"); + dev_err(&pdev->dev, "Cannot find PCI base address\n"); err = -ENODEV; goto err_disable_pdev; } err = pci_request_regions(pdev, MODULE_NAME); if(err){ - printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, " - "exiting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); goto err_disable_pdev; } @@ -1830,16 +1829,14 @@ static int amd8111e_probe_one(struct pci_dev *pdev, /* Find power-management capability. */ if (!pdev->pm_cap) { - printk(KERN_ERR "amd8111e: No Power Management capability, " - "exiting.\n"); + dev_err(&pdev->dev, "No Power Management capability\n"); err = -ENODEV; goto err_free_reg; } /* Initialize DMA */ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) { - printk(KERN_ERR "amd8111e: DMA not supported," - "exiting.\n"); + dev_err(&pdev->dev, "DMA not supported\n"); err = -ENODEV; goto err_free_reg; } @@ -1868,8 +1865,7 @@ static int amd8111e_probe_one(struct pci_dev *pdev, lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); if (!lp->mmio) { - printk(KERN_ERR "amd8111e: Cannot map device registers, " - "exiting\n"); + dev_err(&pdev->dev, "Cannot map device registers\n"); err = -ENOMEM; goto err_free_dev; } @@ -1911,8 +1907,7 @@ static int amd8111e_probe_one(struct pci_dev *pdev, err = register_netdev(dev); if (err) { - printk(KERN_ERR "amd8111e: Cannot register net device, " - "exiting.\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); goto err_free_dev; } @@ -1932,16 +1927,15 @@ static int amd8111e_probe_one(struct pci_dev *pdev, /* display driver and device information */ chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; - printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n", - dev->name,MODULE_VERS); - printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", - dev->name, chip_version, dev->dev_addr); + dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS); + dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", + chip_version, dev->dev_addr); if (lp->ext_phy_id) - printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n", - dev->name, lp->ext_phy_id, lp->ext_phy_addr); + dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", + lp->ext_phy_id, lp->ext_phy_addr); else - printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n", - dev->name); + dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); + return 0; err_free_dev: