From: Georgi Djakov Date: Wed, 3 Sep 2014 16:28:16 +0000 (+0300) Subject: pinctrl: qcom: Make the target processor value configurable X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f712c554a7fca8f6308afbce844eacbf5e48787b;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git pinctrl: qcom: Make the target processor value configurable Currently the value used to specify that interrupts from the gpio should be routed to the application processor is hardcoded for all Qualcomm SoCs. But the new APQ8084 SoC uses a different value. To resolve this, we make this value configurable for each SoC. For all existing SoCs we continue to use the current value, and only for APQ8084 we use the new value. Suggested-by: Bjorn Andersson Acked-by: Bjorn Andersson Signed-off-by: Georgi Djakov Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/qcom/pinctrl-apq8064.c b/drivers/pinctrl/qcom/pinctrl-apq8064.c index ef1263c7bdde..c832d7d6b912 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8064.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c @@ -258,6 +258,7 @@ static const unsigned int sdc3_data_pins[] = { 95 }; .intr_status_bit = 0, \ .intr_ack_high = 1, \ .intr_target_bit = 0, \ + .intr_target_kpss_val = 4, \ .intr_raw_status_bit = 3, \ .intr_polarity_bit = 1, \ .intr_detection_bit = 2, \ @@ -283,6 +284,7 @@ static const unsigned int sdc3_data_pins[] = { 95 }; .intr_enable_bit = -1, \ .intr_status_bit = -1, \ .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ .intr_raw_status_bit = -1, \ .intr_polarity_bit = -1, \ .intr_detection_bit = -1, \ diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c index 5362959c448f..138cbf6134a5 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8084.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c @@ -371,6 +371,7 @@ static const unsigned int sdc2_data_pins[] = { 152 }; .intr_status_bit = 0, \ .intr_ack_high = 0, \ .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ .intr_raw_status_bit = 4, \ .intr_polarity_bit = 1, \ .intr_detection_bit = 2, \ @@ -396,6 +397,7 @@ static const unsigned int sdc2_data_pins[] = { 152 }; .intr_enable_bit = -1, \ .intr_status_bit = -1, \ .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ .intr_raw_status_bit = -1, \ .intr_polarity_bit = -1, \ .intr_detection_bit = -1, \ diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8064.c b/drivers/pinctrl/qcom/pinctrl-ipq8064.c index 767cf1120b20..81f49a9b4dbe 100644 --- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c +++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c @@ -211,6 +211,7 @@ static const unsigned int sdc3_data_pins[] = { 71 }; .intr_status_bit = 0, \ .intr_ack_high = 1, \ .intr_target_bit = 0, \ + .intr_target_kpss_val = 4, \ .intr_raw_status_bit = 3, \ .intr_polarity_bit = 1, \ .intr_detection_bit = 2, \ @@ -236,6 +237,7 @@ static const unsigned int sdc3_data_pins[] = { 71 }; .intr_enable_bit = -1, \ .intr_status_bit = -1, \ .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ .intr_raw_status_bit = -1, \ .intr_polarity_bit = -1, \ .intr_detection_bit = -1, \ diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 01eab47a746f..d5ed1272b928 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -653,8 +653,6 @@ static void msm_gpio_irq_ack(struct irq_data *d) spin_unlock_irqrestore(&pctrl->lock, flags); } -#define INTR_TARGET_PROC_APPS 4 - static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); @@ -678,7 +676,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type) /* Route interrupts to application cpu */ val = readl(pctrl->regs + g->intr_target_reg); val &= ~(7 << g->intr_target_bit); - val |= INTR_TARGET_PROC_APPS << g->intr_target_bit; + val |= g->intr_target_kpss_val << g->intr_target_bit; writel(val, pctrl->regs + g->intr_target_reg); /* Update configuration for gpio. diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index 7b2a227a590a..b952c4b4a8e9 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -53,6 +53,8 @@ struct msm_function { * @intr_status_bit: Offset in @intr_status_reg for reading and acking the interrupt * status. * @intr_target_bit: Offset in @intr_target_reg for configuring the interrupt routing. + * @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from + * this gpio should get routed to the KPSS processor. * @intr_raw_status_bit: Offset in @intr_cfg_reg for the raw status bit. * @intr_polarity_bit: Offset in @intr_cfg_reg for specifying polarity of the interrupt. * @intr_detection_bit: Offset in @intr_cfg_reg for specifying interrupt type. @@ -88,6 +90,7 @@ struct msm_pingroup { unsigned intr_ack_high:1; unsigned intr_target_bit:5; + unsigned intr_target_kpss_val:5; unsigned intr_raw_status_bit:5; unsigned intr_polarity_bit:5; unsigned intr_detection_bit:5; diff --git a/drivers/pinctrl/qcom/pinctrl-msm8960.c b/drivers/pinctrl/qcom/pinctrl-msm8960.c index 35047036a053..2ab21ce5575a 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm8960.c +++ b/drivers/pinctrl/qcom/pinctrl-msm8960.c @@ -384,6 +384,7 @@ static const unsigned int sdc3_data_pins[] = { 157 }; .intr_status_bit = 0, \ .intr_ack_high = 1, \ .intr_target_bit = 0, \ + .intr_target_kpss_val = 4, \ .intr_raw_status_bit = 3, \ .intr_polarity_bit = 1, \ .intr_detection_bit = 2, \ @@ -409,6 +410,7 @@ static const unsigned int sdc3_data_pins[] = { 157 }; .intr_enable_bit = -1, \ .intr_status_bit = -1, \ .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ .intr_raw_status_bit = -1, \ .intr_polarity_bit = -1, \ .intr_detection_bit = -1, \ diff --git a/drivers/pinctrl/qcom/pinctrl-msm8x74.c b/drivers/pinctrl/qcom/pinctrl-msm8x74.c index 8c9720154d1e..3c858384d041 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c +++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c @@ -366,6 +366,7 @@ static const unsigned int sdc2_data_pins[] = { 151 }; .intr_enable_bit = 0, \ .intr_status_bit = 0, \ .intr_target_bit = 5, \ + .intr_target_kpss_val = 4, \ .intr_raw_status_bit = 4, \ .intr_polarity_bit = 1, \ .intr_detection_bit = 2, \ @@ -391,6 +392,7 @@ static const unsigned int sdc2_data_pins[] = { 151 }; .intr_enable_bit = -1, \ .intr_status_bit = -1, \ .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ .intr_raw_status_bit = -1, \ .intr_polarity_bit = -1, \ .intr_detection_bit = -1, \