From: Tejun Heo Date: Wed, 31 May 2006 09:27:48 +0000 (+0900) Subject: [PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f5914a461eb9703773226a0813f6ffcae10c0861;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo --- diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 45fd71d80128..8493b021cc07 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1026,7 +1026,8 @@ static void ahci_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, ahci_softreset, ahci_hardreset, ahci_postreset); + ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset, + ahci_postreset); } static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 6d30d2c52960..4bc05371737c 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -695,6 +695,7 @@ void ata_bmdma_thaw(struct ata_port *ap) /** * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller * @ap: port to handle error for + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -710,8 +711,9 @@ void ata_bmdma_thaw(struct ata_port *ap) * LOCKING: * Kernel thread context (may sleep) */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) { struct ata_host_set *host_set = ap->host_set; struct ata_eh_context *ehc = &ap->eh_context; @@ -759,7 +761,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset, ata_eh_thaw_port(ap); /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, softreset, hardreset, postreset); + ata_do_eh(ap, prereset, softreset, hardreset, postreset); } /** @@ -779,7 +781,8 @@ void ata_bmdma_error_handler(struct ata_port *ap) if (sata_scr_valid(ap)) hardreset = sata_std_hardreset; - ata_bmdma_drive_eh(ap, ata_std_softreset, hardreset, ata_std_postreset); + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_std_postreset); } /** diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4823ecefb8a1..2531a701d6e9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2525,6 +2525,90 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params) return sata_phy_debounce(ap, params); } +static void ata_wait_spinup(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long end, secs; + int rc; + + /* first, debounce phy if SATA */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_debounce(ap, sata_deb_timing_eh); + + /* if debounced successfully and offline, no need to wait */ + if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) + return; + } + + /* okay, let's give the drive time to spin up */ + end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; + secs = ((end - jiffies) + HZ - 1) / HZ; + + if (time_after(jiffies, end)) + return; + + if (secs > 5) + ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " + "(%lu secs)\n", secs); + + schedule_timeout_uninterruptible(end - jiffies); +} + +/** + * ata_std_prereset - prepare for reset + * @ap: ATA port to be reset + * + * @ap is about to be reset. Initialize it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing; + int rc; + + /* hotplug? */ + if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { + if (ap->flags & ATA_FLAG_HRST_TO_RESUME) + ehc->i.action |= ATA_EH_HARDRESET; + if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) + ata_wait_spinup(ap); + } + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume phy */ + if (ap->cbl == ATA_CBL_SATA) { + if (ap->flags & ATA_FLAG_LOADING) + timing = sata_deb_timing_boot; + else + timing = sata_deb_timing_eh; + + rc = sata_phy_resume(ap, timing); + if (rc && rc != -EOPNOTSUPP) { + /* phy resume failed */ + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link for reset (errno=%d)\n", rc); + return rc; + } + } + + /* Wait for !BSY if the controller can wait for the first D2H + * Reg FIS and we don't know that no device is attached. + */ + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + /** * ata_std_probeinit - initialize probing * @ap: port to be probed @@ -5840,6 +5924,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_probeinit); +EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 9173d8f2ce5d..0e66f140e53b 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1318,20 +1318,58 @@ static void ata_eh_report(struct ata_port *ap) } } -static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset, +static int ata_eh_reset(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { struct ata_eh_context *ehc = &ap->eh_context; unsigned int classes[ATA_MAX_DEVICES]; int tries = ATA_EH_RESET_TRIES; + unsigned int action; ata_reset_fn_t reset; int i, rc; + /* Determine which reset to use and record in ehc->i.action. + * prereset() may examine and modify it. + */ + action = ehc->i.action; + ehc->i.action &= ~ATA_EH_RESET_MASK; if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && - !(ehc->i.action & ATA_EH_HARDRESET)))) - reset = softreset; + !(action & ATA_EH_HARDRESET)))) + ehc->i.action |= ATA_EH_SOFTRESET; else + ehc->i.action |= ATA_EH_HARDRESET; + + if (prereset) { + rc = prereset(ap); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "prereset failed (errno=%d)\n", rc); + return rc; + } + } + + /* prereset() might have modified ehc->i.action */ + if (ehc->i.action & ATA_EH_HARDRESET) reset = hardreset; + else if (ehc->i.action & ATA_EH_SOFTRESET) + reset = softreset; + else { + /* prereset told us not to reset, bang classes and return */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_NONE; + return 0; + } + + /* did prereset() screw up? if so, fix up to avoid oopsing */ + if (!reset) { + ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " + "invalid reset type\n"); + if (softreset) + reset = softreset; + else + reset = hardreset; + } retry: ata_port_printk(ap, KERN_INFO, "%s resetting port\n", @@ -1424,6 +1462,7 @@ static int ata_port_nr_enabled(struct ata_port *ap) /** * ata_eh_recover - recover host port after error * @ap: host port to recover + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -1440,8 +1479,8 @@ static int ata_port_nr_enabled(struct ata_port *ap) * RETURNS: * 0 on success, -errno on failure. */ -static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, +static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { struct ata_eh_context *ehc = &ap->eh_context; @@ -1469,7 +1508,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset, if (ehc->i.action & ATA_EH_RESET_MASK) { ata_eh_freeze_port(ap); - rc = ata_eh_reset(ap, softreset, hardreset, postreset); + rc = ata_eh_reset(ap, prereset, softreset, hardreset, + postreset); if (rc) { ata_port_printk(ap, KERN_ERR, "reset failed, giving up\n"); @@ -1586,6 +1626,7 @@ static void ata_eh_finish(struct ata_port *ap) /** * ata_do_eh - do standard error handling * @ap: host port to handle error for + * @prereset: prereset method (can be NULL) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) @@ -1595,11 +1636,12 @@ static void ata_eh_finish(struct ata_port *ap) * LOCKING: * Kernel thread context (may sleep). */ -void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) { ata_eh_autopsy(ap); ata_eh_report(ap); - ata_eh_recover(ap, softreset, hardreset, postreset); + ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4c76f05d9b65..26d7c54c175e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -912,7 +912,8 @@ static void sil24_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, sil24_softreset, sil24_hardreset, ata_std_postreset); + ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, + ata_std_postreset); } static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/include/linux/libata.h b/include/linux/libata.h index 1c167f728fb4..fe5f53943c44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -262,6 +262,15 @@ enum { ATA_PROBE_MAX_TRIES = 3, ATA_EH_RESET_TRIES = 3, ATA_EH_DEV_TRIES = 3, + + /* Drive spinup time (time from power-on to the first D2H FIS) + * in msecs - 8s currently. Failing to get ready in this time + * isn't critical. It will result in reset failure for + * controllers which can't wait for the first D2H FIS. libata + * will retry, so it just has to be long enough to spin up + * most devices. + */ + ATA_SPINUP_WAIT = 8000, }; enum hsm_task_states { @@ -294,9 +303,10 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef void (*ata_probeinit_fn_t)(struct ata_port *); -typedef int (*ata_reset_fn_t)(struct ata_port *, unsigned int *); -typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *); +typedef void (*ata_probeinit_fn_t)(struct ata_port *ap); +typedef int (*ata_prereset_fn_t)(struct ata_port *ap); +typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); +typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); struct ata_ioports { unsigned long cmd_addr; @@ -623,6 +633,7 @@ extern int ata_drive_probe_reset(struct ata_port *ap, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, unsigned int *classes); extern void ata_std_probeinit(struct ata_port *ap); +extern int ata_std_prereset(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); @@ -706,7 +717,7 @@ extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void ata_bmdma_freeze(struct ata_port *ap); extern void ata_bmdma_thaw(struct ata_port *ap); -extern void ata_bmdma_drive_eh(struct ata_port *ap, +extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); @@ -784,8 +795,9 @@ extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); -extern void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset); /* * printk helpers