From: Antti Palosaari Date: Mon, 28 Nov 2011 23:58:11 +0000 (-0300) Subject: [media] af9013: rewrite whole driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f571e004c396c2ed8c2ba6bfc8a229b6bd5ab724;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [media] af9013: rewrite whole driver Rewrite whole af9013 demod driver in order to decrease I2C I/O. We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used) seems to have some problems under heavy I2C traffic. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 033aa8affd8e..7b606b7834b3 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -50,14 +50,14 @@ static int af9015_properties_count = ARRAY_SIZE(af9015_properties); static struct af9013_config af9015_af9013_config[] = { { - .demod_address = AF9015_I2C_DEMOD, - .output_mode = AF9013_OUTPUT_MODE_USB, + .i2c_addr = AF9015_I2C_DEMOD, + .ts_mode = AF9013_TS_USB, .api_version = { 0, 1, 9, 0 }, .gpio[0] = AF9013_GPIO_HI, .gpio[3] = AF9013_GPIO_TUNER_ON, }, { - .output_mode = AF9013_OUTPUT_MODE_SERIAL, + .ts_mode = AF9013_TS_SERIAL, .api_version = { 0, 1, 9, 0 }, .gpio[0] = AF9013_GPIO_TUNER_ON, .gpio[1] = AF9013_GPIO_LO, @@ -216,8 +216,8 @@ static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, { struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; - if (addr == af9015_af9013_config[0].demod_address || - addr == af9015_af9013_config[1].demod_address) + if (addr == af9015_af9013_config[0].i2c_addr || + addr == af9015_af9013_config[1].i2c_addr) req.addr_len = 3; return af9015_ctrl_msg(d, &req); @@ -228,8 +228,8 @@ static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, { struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; - if (addr == af9015_af9013_config[0].demod_address || - addr == af9015_af9013_config[1].demod_address) + if (addr == af9015_af9013_config[0].i2c_addr || + addr == af9015_af9013_config[1].i2c_addr) req.addr_len = 3; return af9015_ctrl_msg(d, &req); @@ -271,8 +271,8 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. return -EAGAIN; while (i < num) { - if (msg[i].addr == af9015_af9013_config[0].demod_address || - msg[i].addr == af9015_af9013_config[1].demod_address) { + if (msg[i].addr == af9015_af9013_config[0].i2c_addr || + msg[i].addr == af9015_af9013_config[1].i2c_addr) { addr = msg[i].buf[0] << 8; addr += msg[i].buf[1]; mbox = msg[i].buf[2]; @@ -288,8 +288,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = -EOPNOTSUPP; goto error; } - if (msg[i].addr == - af9015_af9013_config[0].demod_address) + if (msg[i].addr == af9015_af9013_config[0].i2c_addr) req.cmd = READ_MEMORY; else req.cmd = READ_I2C; @@ -307,7 +306,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. goto error; } if (msg[i].addr == - af9015_af9013_config[0].demod_address) { + af9015_af9013_config[0].i2c_addr) { ret = -EINVAL; goto error; } @@ -325,8 +324,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = -EOPNOTSUPP; goto error; } - if (msg[i].addr == - af9015_af9013_config[0].demod_address) + if (msg[i].addr == af9015_af9013_config[0].i2c_addr) req.cmd = WRITE_MEMORY; else req.cmd = WRITE_I2C; @@ -508,7 +506,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d) msleep(100); ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].demod_address, 0x98be, &val); + af9015_af9013_config[1].i2c_addr, 0x98be, &val); if (ret) goto error; else @@ -536,7 +534,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d) goto error; /* request boot firmware */ - ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address, + ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr, 0xe205, 1); deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); if (ret) @@ -547,7 +545,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d) /* check firmware status */ ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].demod_address, 0x98be, &val); + af9015_af9013_config[1].i2c_addr, 0x98be, &val); deb_info("%s: firmware status cmd status:%d fw status:%02x\n", __func__, ret, val); if (ret) @@ -840,7 +838,7 @@ static int af9015_read_config(struct usb_device *udev) if (ret) goto error; - deb_info("%s: IR mode:%d\n", __func__, val); + deb_info("%s: IR mode=%d\n", __func__, val); for (i = 0; i < af9015_properties_count; i++) { if (val == AF9015_IR_MODE_DISABLED) af9015_properties[i].rc.core.rc_codes = NULL; @@ -854,7 +852,7 @@ static int af9015_read_config(struct usb_device *udev) if (ret) goto error; af9015_config.dual_mode = val; - deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode); + deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode); /* Set adapter0 buffer size according to USB port speed, adapter1 buffer size can be static because it is enabled only USB2.0 */ @@ -878,7 +876,7 @@ static int af9015_read_config(struct usb_device *udev) ret = af9015_rw_udev(udev, &req); if (ret) goto error; - af9015_af9013_config[1].demod_address = val; + af9015_af9013_config[1].i2c_addr = val; /* enable 2nd adapter */ for (i = 0; i < af9015_properties_count; i++) @@ -900,34 +898,38 @@ static int af9015_read_config(struct usb_device *udev) goto error; switch (val) { case 0: - af9015_af9013_config[i].adc_clock = 28800; + af9015_af9013_config[i].clock = 28800000; break; case 1: - af9015_af9013_config[i].adc_clock = 20480; + af9015_af9013_config[i].clock = 20480000; break; case 2: - af9015_af9013_config[i].adc_clock = 28000; + af9015_af9013_config[i].clock = 28000000; break; case 3: - af9015_af9013_config[i].adc_clock = 25000; + af9015_af9013_config[i].clock = 25000000; break; }; - deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i, - val, af9015_af9013_config[i].adc_clock); + deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i, + val, af9015_af9013_config[i].clock); - /* tuner IF */ + /* IF frequency */ req.addr = AF9015_EEPROM_IF1H + offset; ret = af9015_rw_udev(udev, &req); if (ret) goto error; - af9015_af9013_config[i].tuner_if = val << 8; + + af9015_af9013_config[i].if_frequency = val << 8; + req.addr = AF9015_EEPROM_IF1L + offset; ret = af9015_rw_udev(udev, &req); if (ret) goto error; - af9015_af9013_config[i].tuner_if += val; - deb_info("%s: [%d] IF1:%d\n", __func__, i, - af9015_af9013_config[0].tuner_if); + + af9015_af9013_config[i].if_frequency += val; + af9015_af9013_config[i].if_frequency *= 1000; + deb_info("%s: [%d] IF frequency=%d\n", __func__, i, + af9015_af9013_config[0].if_frequency); /* MT2060 IF1 */ req.addr = AF9015_EEPROM_MT2060_IF1H + offset; @@ -940,7 +942,7 @@ static int af9015_read_config(struct usb_device *udev) if (ret) goto error; af9015_config.mt2060_if1[i] += val; - deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i, + deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i, af9015_config.mt2060_if1[i]); /* tuner */ @@ -957,30 +959,30 @@ static int af9015_read_config(struct usb_device *udev) case AF9013_TUNER_TDA18271: case AF9013_TUNER_QT1010A: case AF9013_TUNER_TDA18218: - af9015_af9013_config[i].rf_spec_inv = 1; + af9015_af9013_config[i].spec_inv = 1; break; case AF9013_TUNER_MXL5003D: case AF9013_TUNER_MXL5005D: case AF9013_TUNER_MXL5005R: case AF9013_TUNER_MXL5007T: - af9015_af9013_config[i].rf_spec_inv = 0; + af9015_af9013_config[i].spec_inv = 0; break; case AF9013_TUNER_MC44S803: af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO; - af9015_af9013_config[i].rf_spec_inv = 1; + af9015_af9013_config[i].spec_inv = 1; break; default: - warn("tuner id:%d not supported, please report!", val); + warn("tuner id=%d not supported, please report!", val); return -ENODEV; }; af9015_af9013_config[i].tuner = val; - deb_info("%s: [%d] tuner id:%d\n", __func__, i, val); + deb_info("%s: [%d] tuner id=%d\n", __func__, i, val); } error: if (ret) - err("eeprom read failed:%d", ret); + err("eeprom read failed=%d", ret); /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM content :-( Override some wrong values here. Ditto for the @@ -998,7 +1000,7 @@ error: af9015_properties[i].num_adapters = 1; /* set correct IF */ - af9015_af9013_config[0].tuner_if = 4570; + af9015_af9013_config[0].if_frequency = 4570000; } return ret; @@ -1156,7 +1158,7 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe) if (mutex_lock_interruptible(&adap->dev->usb_mutex)) return -EAGAIN; - ret = priv->init[adap->id](fe); + ret = priv->sleep[adap->id](fe); mutex_unlock(&adap->dev->usb_mutex); diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index f4276e471d38..77862fe2c65e 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -2,6 +2,7 @@ * Afatech AF9013 demodulator driver * * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari * * Thanks to Afatech who kindly provided information. * @@ -21,25 +22,15 @@ * */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include "dvb_frontend.h" #include "af9013_priv.h" -#include "af9013.h" int af9013_debug; +module_param_named(debug, af9013_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); struct af9013_state { struct i2c_adapter *i2c; - struct dvb_frontend frontend; - + struct dvb_frontend fe; struct af9013_config config; /* tuner/demod RF and IF AGC limits used for signal strength calc */ @@ -48,107 +39,178 @@ struct af9013_state { u32 ber; u32 ucblocks; u16 snr; - u32 frequency; - unsigned long next_statistics_check; + u32 bandwidth_hz; + fe_status_t fe_status; + unsigned long set_frontend_jiffies; + unsigned long read_status_jiffies; + bool first_tune; + bool i2c_gate_state; + unsigned int statistics_step:3; + struct delayed_work statistics_work; }; -static u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; - -static int af9013_write_regs(struct af9013_state *state, u8 mbox, u16 reg, - u8 *val, u8 len) +/* write multiple registers */ +static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, + const u8 *val, int len) { + int ret; u8 buf[3+len]; - struct i2c_msg msg = { - .addr = state->config.demod_address, - .flags = 0, - .len = sizeof(buf), - .buf = buf }; - - buf[0] = reg >> 8; - buf[1] = reg & 0xff; + struct i2c_msg msg[1] = { + { + .addr = priv->config.i2c_addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + buf[0] = (reg >> 8) & 0xff; + buf[1] = (reg >> 0) & 0xff; buf[2] = mbox; memcpy(&buf[3], val, len); - if (i2c_transfer(state->i2c, &msg, 1) != 1) { - warn("I2C write failed reg:%04x len:%d", reg, len); - return -EREMOTEIO; + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + warn("i2c wr failed=%d reg=%04x len=%d", ret, reg, len); + ret = -EREMOTEIO; } - return 0; + return ret; } -static int af9013_write_ofdm_regs(struct af9013_state *state, u16 reg, u8 *val, - u8 len) +/* read multiple registers */ +static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, + u8 *val, int len) { - u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(0 << 6)|(0 << 7); - return af9013_write_regs(state, mbox, reg, val, len); + int ret; + u8 buf[3]; + struct i2c_msg msg[2] = { + { + .addr = priv->config.i2c_addr, + .flags = 0, + .len = 3, + .buf = buf, + }, { + .addr = priv->config.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + buf[0] = (reg >> 8) & 0xff; + buf[1] = (reg >> 0) & 0xff; + buf[2] = mbox; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + warn("i2c rd failed=%d reg=%04x len=%d", ret, reg, len); + ret = -EREMOTEIO; + } + return ret; } -static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, - u8 len) +/* write multiple registers */ +static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val, + int len) { - u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(1 << 6)|(1 << 7); - return af9013_write_regs(state, mbox, reg, val, len); + int ret, i; + u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0); + + if ((priv->config.ts_mode == AF9013_TS_USB) & + ((reg & 0xff00) != 0xff00) & ((reg & 0xff00) != 0xae00)) { + mbox |= ((len - 1) << 2); + ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len); + } else { + for (i = 0; i < len; i++) { + ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1); + if (ret) + goto err; + } + } + +err: + return 0; +} + +/* read multiple registers */ +static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len) +{ + int ret, i; + u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0); + + if ((priv->config.ts_mode == AF9013_TS_USB) & + ((reg & 0xff00) != 0xff00) & ((reg & 0xff00) != 0xae00)) { + mbox |= ((len - 1) << 2); + ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len); + } else { + for (i = 0; i < len; i++) { + ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1); + if (ret) + goto err; + } + } + +err: + return 0; } /* write single register */ -static int af9013_write_reg(struct af9013_state *state, u16 reg, u8 val) +static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val) { - return af9013_write_ofdm_regs(state, reg, &val, 1); + return af9013_wr_regs(priv, reg, &val, 1); } /* read single register */ -static int af9013_read_reg(struct af9013_state *state, u16 reg, u8 *val) +static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val) { - u8 obuf[3] = { reg >> 8, reg & 0xff, 0 }; - u8 ibuf[1]; - struct i2c_msg msg[2] = { - { - .addr = state->config.demod_address, - .flags = 0, - .len = sizeof(obuf), - .buf = obuf - }, { - .addr = state->config.demod_address, - .flags = I2C_M_RD, - .len = sizeof(ibuf), - .buf = ibuf - } - }; + return af9013_rd_regs(priv, reg, val, 1); +} - if (i2c_transfer(state->i2c, msg, 2) != 2) { - warn("I2C read failed reg:%04x", reg); - return -EREMOTEIO; - } - *val = ibuf[0]; - return 0; +static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0); + return af9013_wr_regs_i2c(state, mbox, reg, val, len); } -static int af9013_write_reg_bits(struct af9013_state *state, u16 reg, u8 pos, - u8 len, u8 val) +static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos, + int len, u8 val) { int ret; u8 tmp, mask; - ret = af9013_read_reg(state, reg, &tmp); - if (ret) - return ret; + /* no need for read if whole reg is written */ + if (len != 8) { + ret = af9013_rd_reg(state, reg, &tmp); + if (ret) + return ret; - mask = regmask[len - 1] << pos; - tmp = (tmp & ~mask) | ((val << pos) & mask); + mask = (0xff >> (8 - len)) << pos; + val <<= pos; + tmp &= ~mask; + val |= tmp; + } - return af9013_write_reg(state, reg, tmp); + return af9013_wr_reg(state, reg, val); } -static int af9013_read_reg_bits(struct af9013_state *state, u16 reg, u8 pos, - u8 len, u8 *val) +static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos, + int len, u8 *val) { int ret; u8 tmp; - ret = af9013_read_reg(state, reg, &tmp); + ret = af9013_rd_reg(state, reg, &tmp); if (ret) return ret; - *val = (tmp >> pos) & regmask[len - 1]; + + *val = (tmp >> pos); + *val &= (0xff >> (8 - len)); + return 0; } @@ -157,10 +219,13 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) int ret; u8 pos; u16 addr; - deb_info("%s: gpio:%d gpioval:%02x\n", __func__, gpio, gpioval); -/* GPIO0 & GPIO1 0xd735 - GPIO2 & GPIO3 0xd736 */ + dbg("%s: gpio=%d gpioval=%02x", __func__, gpio, gpioval); + + /* + * GPIO0 & GPIO1 0xd735 + * GPIO2 & GPIO3 0xd736 + */ switch (gpio) { case 0: @@ -175,7 +240,7 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) default: err("invalid gpio:%d\n", gpio); ret = -EINVAL; - goto error; + goto err; }; switch (gpio) { @@ -190,16 +255,21 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) break; }; - ret = af9013_write_reg_bits(state, addr, pos, 4, gpioval); + ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval); + if (ret) + goto err; -error: + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } static u32 af913_div(u32 a, u32 b, u32 x) { u32 r = 0, c = 0, i; - deb_info("%s: a:%d b:%d x:%d\n", __func__, a, b, x); + + dbg("%s: a=%d b=%d x=%d", __func__, a, b, x); if (a > b) { c = a / b; @@ -216,182 +286,408 @@ static u32 af913_div(u32 a, u32 b, u32 x) } r = (c << (u32)x) + r; - deb_info("%s: a:%d b:%d x:%d r:%d r:%x\n", __func__, a, b, x, r, r); + dbg("%s: a=%d b=%d x=%d r=%x", __func__, a, b, x, r); return r; } -static int af9013_set_coeff(struct af9013_state *state, fe_bandwidth_t bw) +static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) { - int ret, i, j, found; - deb_info("%s: adc_clock:%d bw:%d\n", __func__, - state->config.adc_clock, bw); - - /* lookup coeff from table */ - for (i = 0, found = 0; i < ARRAY_SIZE(coeff_table); i++) { - if (coeff_table[i].adc_clock == state->config.adc_clock && - coeff_table[i].bw == bw) { - found = 1; - break; - } - } + int ret, i; + u8 tmp; - if (!found) { - err("invalid bw or clock"); - ret = -EINVAL; - goto error; + dbg("%s: onoff=%d", __func__, onoff); + + /* enable reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1); + if (ret) + goto err; + + /* start reset mechanism */ + ret = af9013_wr_reg(state, 0xaeff, 1); + if (ret) + goto err; + + /* wait reset performs */ + for (i = 0; i < 150; i++) { + ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp); + if (ret) + goto err; + + if (tmp) + break; /* reset done */ + + usleep_range(5000, 25000); } - deb_info("%s: coeff: ", __func__); - debug_dump(coeff_table[i].val, sizeof(coeff_table[i].val), deb_info); + if (!tmp) + return -ETIMEDOUT; - /* program */ - for (j = 0; j < sizeof(coeff_table[i].val); j++) { - ret = af9013_write_reg(state, 0xae00 + j, - coeff_table[i].val[j]); + if (onoff) { + /* clear reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0); if (ret) - break; + goto err; + + /* disable reset */ + ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0); + + /* power on */ + ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0); + } else { + /* power off */ + ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1); } -error: + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } -static int af9013_set_adc_ctrl(struct af9013_state *state) +static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) { + struct af9013_state *state = fe->demodulator_priv; int ret; - u8 buf[3], tmp, i; - u32 adc_cw; - deb_info("%s: adc_clock:%d\n", __func__, state->config.adc_clock); + dbg("%s", __func__); - /* adc frequency type */ - switch (state->config.adc_clock) { - case 28800: /* 28.800 MHz */ - tmp = 0; - break; - case 20480: /* 20.480 MHz */ - tmp = 1; + /* reset and start BER counter */ + ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1); + if (ret) + goto err; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[5]; + + dbg("%s", __func__); + + /* check if error bit count is ready */ + ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]); + if (ret) + goto err; + + if (!buf[0]) { + dbg("%s: not ready", __func__); + return 0; + } + + ret = af9013_rd_regs(state, 0xd387, buf, 5); + if (ret) + goto err; + + state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + state->ucblocks += (buf[4] << 8) | buf[3]; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int af9013_statistics_snr_start(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + dbg("%s", __func__); + + /* start SNR meas */ + ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1); + if (ret) + goto err; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int af9013_statistics_snr_result(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret, i, len; + u8 buf[3], tmp; + u32 snr_val; + const struct af9013_snr *uninitialized_var(snr_lut); + + dbg("%s", __func__); + + /* check if SNR ready */ + ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp); + if (ret) + goto err; + + if (!tmp) { + dbg("%s: not ready", __func__); + return 0; + } + + /* read value */ + ret = af9013_rd_regs(state, 0xd2e3, buf, 3); + if (ret) + goto err; + + snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + + /* read current modulation */ + ret = af9013_rd_reg(state, 0xd3c1, &tmp); + if (ret) + goto err; + + switch ((tmp >> 6) & 3) { + case 0: + len = ARRAY_SIZE(qpsk_snr_lut); + snr_lut = qpsk_snr_lut; break; - case 28000: /* 28.000 MHz */ - tmp = 2; + case 1: + len = ARRAY_SIZE(qam16_snr_lut); + snr_lut = qam16_snr_lut; break; - case 25000: /* 25.000 MHz */ - tmp = 3; + case 2: + len = ARRAY_SIZE(qam64_snr_lut); + snr_lut = qam64_snr_lut; break; default: - err("invalid xtal"); - return -EINVAL; + goto err; + break; } - adc_cw = af913_div(state->config.adc_clock*1000, 1000000ul, 19ul); + for (i = 0; i < len; i++) { + tmp = snr_lut[i].snr; - buf[0] = (u8) ((adc_cw & 0x000000ff)); - buf[1] = (u8) ((adc_cw & 0x0000ff00) >> 8); - buf[2] = (u8) ((adc_cw & 0x00ff0000) >> 16); + if (snr_val < snr_lut[i].val) + break; + } + state->snr = tmp * 10; /* dB/10 */ - deb_info("%s: adc_cw:", __func__); - debug_dump(buf, sizeof(buf), deb_info); + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} - /* program */ - for (i = 0; i < sizeof(buf); i++) { - ret = af9013_write_reg(state, 0xd180 + i, buf[i]); - if (ret) - goto error; - } - ret = af9013_write_reg_bits(state, 0x9bd2, 0, 4, tmp); -error: +static int af9013_statistics_signal_strength(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret = 0; + u8 buf[2], rf_gain, if_gain; + int signal_strength; + + dbg("%s", __func__); + + if (!state->signal_strength_en) + return 0; + + ret = af9013_rd_regs(state, 0xd07c, buf, 2); + if (ret) + goto err; + + rf_gain = buf[0]; + if_gain = buf[1]; + + signal_strength = (0xffff / \ + (9 * (state->rf_50 + state->if_50) - \ + 11 * (state->rf_80 + state->if_80))) * \ + (10 * (rf_gain + if_gain) - \ + 11 * (state->rf_80 + state->if_80)); + if (signal_strength < 0) + signal_strength = 0; + else if (signal_strength > 0xffff) + signal_strength = 0xffff; + + state->signal_strength = signal_strength; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } -static int af9013_set_freq_ctrl(struct af9013_state *state, - struct dvb_frontend *fe) +static void af9013_statistics_work(struct work_struct *work) { int ret; - u16 addr; - u8 buf[3], i, j; - u32 adc_freq, freq_cw; - s8 bfs_spec_inv; - int if_sample_freq; - - for (j = 0; j < 3; j++) { - if (j == 0) { - addr = 0xd140; /* fcw normal */ - bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; - } else if (j == 1) { - addr = 0x9be7; /* fcw dummy ram */ - bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; - } else { - addr = 0x9bea; /* fcw inverted */ - bfs_spec_inv = state->config.rf_spec_inv ? 1 : -1; + struct af9013_state *state = container_of(work, + struct af9013_state, statistics_work.work); + unsigned int next_msec; + + /* update only signal strength when demod is not locked */ + if (!(state->fe_status & FE_HAS_LOCK)) { + state->statistics_step = 0; + state->ber = 0; + state->snr = 0; + } + + switch (state->statistics_step) { + default: + state->statistics_step = 0; + case 0: + ret = af9013_statistics_signal_strength(&state->fe); + state->statistics_step++; + next_msec = 300; + break; + case 1: + ret = af9013_statistics_snr_start(&state->fe); + state->statistics_step++; + next_msec = 200; + break; + case 2: + ret = af9013_statistics_ber_unc_start(&state->fe); + state->statistics_step++; + next_msec = 1000; + break; + case 3: + ret = af9013_statistics_snr_result(&state->fe); + state->statistics_step++; + next_msec = 400; + break; + case 4: + ret = af9013_statistics_ber_unc_result(&state->fe); + state->statistics_step++; + next_msec = 100; + break; + } + + schedule_delayed_work(&state->statistics_work, + msecs_to_jiffies(next_msec)); + + return; +} + +static int af9013_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 800; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int af9013_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct af9013_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, sampling_freq; + bool auto_mode, spec_inv; + u8 buf[6]; + u32 if_frequency, freq_cw; + + dbg("%s: frequency=%d bandwidth_hz=%d", __func__, + c->frequency, c->bandwidth_hz); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, p); + + /* program CFOE coefficients */ + if (c->bandwidth_hz != state->bandwidth_hz) { + for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { + if (coeff_lut[i].clock == state->config.clock && + coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { + break; + } } - adc_freq = state->config.adc_clock * 1000; + ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val, + sizeof(coeff_lut[i].val)); + } + /* program frequency control */ + if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) { /* get used IF frequency */ if (fe->ops.tuner_ops.get_if_frequency) - fe->ops.tuner_ops.get_if_frequency(fe, &if_sample_freq); + fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); else - if_sample_freq = state->config.tuner_if * 1000; + if_frequency = state->config.if_frequency; - while (if_sample_freq > (adc_freq / 2)) - if_sample_freq = if_sample_freq - adc_freq; + sampling_freq = if_frequency; - if (if_sample_freq >= 0) - bfs_spec_inv = bfs_spec_inv * (-1); - else - if_sample_freq = if_sample_freq * (-1); + while (sampling_freq > (state->config.clock / 2)) + sampling_freq -= state->config.clock; - freq_cw = af913_div(if_sample_freq, adc_freq, 23ul); + if (sampling_freq < 0) { + sampling_freq *= -1; + spec_inv = state->config.spec_inv; + } else { + spec_inv = !state->config.spec_inv; + } - if (bfs_spec_inv == -1) - freq_cw = 0x00800000 - freq_cw; + freq_cw = af913_div(sampling_freq, state->config.clock, 23); - buf[0] = (u8) ((freq_cw & 0x000000ff)); - buf[1] = (u8) ((freq_cw & 0x0000ff00) >> 8); - buf[2] = (u8) ((freq_cw & 0x007f0000) >> 16); + if (spec_inv) + freq_cw = 0x800000 - freq_cw; + buf[0] = (freq_cw >> 0) & 0xff; + buf[1] = (freq_cw >> 8) & 0xff; + buf[2] = (freq_cw >> 16) & 0x7f; - deb_info("%s: freq_cw:", __func__); - debug_dump(buf, sizeof(buf), deb_info); + freq_cw = 0x800000 - freq_cw; - /* program */ - for (i = 0; i < sizeof(buf); i++) { - ret = af9013_write_reg(state, addr++, buf[i]); - if (ret) - goto error; - } + buf[3] = (freq_cw >> 0) & 0xff; + buf[4] = (freq_cw >> 8) & 0xff; + buf[5] = (freq_cw >> 16) & 0x7f; + + ret = af9013_wr_regs(state, 0xd140, buf, 3); + if (ret) + goto err; + + ret = af9013_wr_regs(state, 0x9be7, buf, 6); + if (ret) + goto err; } -error: - return ret; -} -static int af9013_set_ofdm_params(struct af9013_state *state, - struct dvb_ofdm_parameters *params, u8 *auto_mode) -{ - int ret; - u8 i, buf[3] = {0, 0, 0}; - *auto_mode = 0; /* set if parameters are requested to auto set */ + /* clear TPS lock flag */ + ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1); + if (ret) + goto err; - /* Try auto-detect transmission parameters in case of AUTO requested or - garbage parameters given by application for compatibility. - MPlayer seems to provide garbage parameters currently. */ + /* clear MPEG2 lock flag */ + ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0); + if (ret) + goto err; - switch (params->transmission_mode) { + /* empty channel function */ + ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0); + if (ret) + goto err; + + /* empty DVB-T channel function */ + ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0); + if (ret) + goto err; + + /* transmission parameters */ + auto_mode = false; + memset(buf, 0, 3); + + switch (c->transmission_mode) { case TRANSMISSION_MODE_AUTO: - *auto_mode = 1; + auto_mode = 1; + break; case TRANSMISSION_MODE_2K: break; case TRANSMISSION_MODE_8K: buf[0] |= (1 << 0); break; default: - deb_info("%s: invalid transmission_mode\n", __func__); - *auto_mode = 1; + dbg("%s: invalid transmission_mode", __func__); + auto_mode = 1; } - switch (params->guard_interval) { + switch (c->guard_interval) { case GUARD_INTERVAL_AUTO: - *auto_mode = 1; + auto_mode = 1; + break; case GUARD_INTERVAL_1_32: break; case GUARD_INTERVAL_1_16: @@ -404,13 +700,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[0] |= (3 << 2); break; default: - deb_info("%s: invalid guard_interval\n", __func__); - *auto_mode = 1; + dbg("%s: invalid guard_interval", __func__); + auto_mode = 1; } - switch (params->hierarchy_information) { + switch (c->hierarchy) { case HIERARCHY_AUTO: - *auto_mode = 1; + auto_mode = 1; + break; case HIERARCHY_NONE: break; case HIERARCHY_1: @@ -423,13 +720,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[0] |= (3 << 4); break; default: - deb_info("%s: invalid hierarchy_information\n", __func__); - *auto_mode = 1; + dbg("%s: invalid hierarchy", __func__); + auto_mode = 1; }; - switch (params->constellation) { + switch (c->modulation) { case QAM_AUTO: - *auto_mode = 1; + auto_mode = 1; + break; case QPSK: break; case QAM_16: @@ -439,16 +737,17 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[1] |= (2 << 6); break; default: - deb_info("%s: invalid constellation\n", __func__); - *auto_mode = 1; + dbg("%s: invalid modulation", __func__); + auto_mode = 1; } /* Use HP. How and which case we can switch to LP? */ buf[1] |= (1 << 4); - switch (params->code_rate_HP) { + switch (c->code_rate_HP) { case FEC_AUTO: - *auto_mode = 1; + auto_mode = 1; + break; case FEC_1_2: break; case FEC_2_3: @@ -464,16 +763,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[2] |= (4 << 0); break; default: - deb_info("%s: invalid code_rate_HP\n", __func__); - *auto_mode = 1; + dbg("%s: invalid code_rate_HP", __func__); + auto_mode = 1; } - switch (params->code_rate_LP) { + switch (c->code_rate_LP) { case FEC_AUTO: - /* if HIERARCHY_NONE and FEC_NONE then LP FEC is set to FEC_AUTO - by dvb_frontend.c for compatibility */ - if (params->hierarchy_information != HIERARCHY_NONE) - *auto_mode = 1; + auto_mode = 1; + break; case FEC_1_2: break; case FEC_2_3: @@ -489,183 +786,63 @@ static int af9013_set_ofdm_params(struct af9013_state *state, buf[2] |= (4 << 3); break; case FEC_NONE: - if (params->hierarchy_information == HIERARCHY_AUTO) - break; + break; default: - deb_info("%s: invalid code_rate_LP\n", __func__); - *auto_mode = 1; + dbg("%s: invalid code_rate_LP", __func__); + auto_mode = 1; } - switch (params->bandwidth) { - case BANDWIDTH_6_MHZ: + switch (c->bandwidth_hz) { + case 6000000: break; - case BANDWIDTH_7_MHZ: + case 7000000: buf[1] |= (1 << 2); break; - case BANDWIDTH_8_MHZ: + case 8000000: buf[1] |= (2 << 2); break; default: - deb_info("%s: invalid bandwidth\n", __func__); - buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */ - } - - /* program */ - for (i = 0; i < sizeof(buf); i++) { - ret = af9013_write_reg(state, 0xd3c0 + i, buf[i]); - if (ret) - break; + dbg("%s: invalid bandwidth_hz", __func__); + ret = -EINVAL; + goto err; } - return ret; -} - -static int af9013_reset(struct af9013_state *state, u8 sleep) -{ - int ret; - u8 tmp, i; - deb_info("%s\n", __func__); - - /* enable OFDM reset */ - ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 1); - if (ret) - goto error; - - /* start reset mechanism */ - ret = af9013_write_reg(state, 0xaeff, 1); + ret = af9013_wr_regs(state, 0xd3c0, buf, 3); if (ret) - goto error; + goto err; - /* reset is done when bit 1 is set */ - for (i = 0; i < 150; i++) { - ret = af9013_read_reg_bits(state, 0xd417, 1, 1, &tmp); - if (ret) - goto error; - if (tmp) - break; /* reset done */ - msleep(10); - } - if (!tmp) - return -ETIMEDOUT; - - /* don't clear reset when going to sleep */ - if (!sleep) { - /* clear OFDM reset */ - ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); + if (auto_mode) { + /* clear easy mode flag */ + ret = af9013_wr_reg(state, 0xaefd, 0); if (ret) - goto error; - - /* disable OFDM reset */ - ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); - } -error: - return ret; -} + goto err; -static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) -{ - int ret; - deb_info("%s: onoff:%d\n", __func__, onoff); - - if (onoff) { - /* power on */ - ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 0); - if (ret) - goto error; - ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); - if (ret) - goto error; - ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); + dbg("%s: auto params", __func__); } else { - /* power off */ - ret = af9013_reset(state, 1); + /* set easy mode flag */ + ret = af9013_wr_reg(state, 0xaefd, 1); if (ret) - goto error; - ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 1); - } -error: - return ret; -} - -static int af9013_lock_led(struct af9013_state *state, u8 onoff) -{ - deb_info("%s: onoff:%d\n", __func__, onoff); - - return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff); -} - -static int af9013_set_frontend(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret; - u8 auto_mode; /* auto set TPS */ - - deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency, - params->u.ofdm.bandwidth); - - state->frequency = params->frequency; - - /* program tuner */ - if (fe->ops.tuner_ops.set_params) - fe->ops.tuner_ops.set_params(fe, params); - - /* program CFOE coefficients */ - ret = af9013_set_coeff(state, params->u.ofdm.bandwidth); - if (ret) - goto error; - - /* program frequency control */ - ret = af9013_set_freq_ctrl(state, fe); - if (ret) - goto error; - - /* clear TPS lock flag (inverted flag) */ - ret = af9013_write_reg_bits(state, 0xd330, 3, 1, 1); - if (ret) - goto error; - - /* clear MPEG2 lock flag */ - ret = af9013_write_reg_bits(state, 0xd507, 6, 1, 0); - if (ret) - goto error; - - /* empty channel function */ - ret = af9013_write_reg_bits(state, 0x9bfe, 0, 1, 0); - if (ret) - goto error; - - /* empty DVB-T channel function */ - ret = af9013_write_reg_bits(state, 0x9bc2, 0, 1, 0); - if (ret) - goto error; + goto err; - /* program TPS and bandwidth, check if auto mode needed */ - ret = af9013_set_ofdm_params(state, ¶ms->u.ofdm, &auto_mode); - if (ret) - goto error; - - if (auto_mode) { - /* clear easy mode flag */ - ret = af9013_write_reg(state, 0xaefd, 0); - deb_info("%s: auto TPS\n", __func__); - } else { - /* set easy mode flag */ - ret = af9013_write_reg(state, 0xaefd, 1); + ret = af9013_wr_reg(state, 0xaefe, 0); if (ret) - goto error; - ret = af9013_write_reg(state, 0xaefe, 0); - deb_info("%s: manual TPS\n", __func__); + goto err; + + dbg("%s: manual params", __func__); } - if (ret) - goto error; - /* everything is set, lets try to receive channel - OFSM GO! */ - ret = af9013_write_reg(state, 0xffff, 0); + /* tune */ + ret = af9013_wr_reg(state, 0xffff, 0); if (ret) - goto error; + goto err; + + state->bandwidth_hz = c->bandwidth_hz; + state->set_frontend_jiffies = jiffies; + state->first_tune = false; -error: + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } @@ -673,525 +850,310 @@ static int af9013_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct af9013_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; int ret; - u8 i, buf[3]; - deb_info("%s\n", __func__); + u8 buf[3]; - /* read TPS registers */ - for (i = 0; i < 3; i++) { - ret = af9013_read_reg(state, 0xd3c0 + i, &buf[i]); - if (ret) - goto error; - } + dbg("%s", __func__); + + ret = af9013_rd_regs(state, 0xd3c0, buf, 3); + if (ret) + goto err; switch ((buf[1] >> 6) & 3) { case 0: - p->u.ofdm.constellation = QPSK; + c->modulation = QPSK; break; case 1: - p->u.ofdm.constellation = QAM_16; + c->modulation = QAM_16; break; case 2: - p->u.ofdm.constellation = QAM_64; + c->modulation = QAM_64; break; } switch ((buf[0] >> 0) & 3) { case 0: - p->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; + c->transmission_mode = TRANSMISSION_MODE_2K; break; case 1: - p->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; + c->transmission_mode = TRANSMISSION_MODE_8K; } switch ((buf[0] >> 2) & 3) { case 0: - p->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; + c->transmission_mode = GUARD_INTERVAL_1_32; break; case 1: - p->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; + c->transmission_mode = GUARD_INTERVAL_1_16; break; case 2: - p->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; + c->transmission_mode = GUARD_INTERVAL_1_8; break; case 3: - p->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; + c->transmission_mode = GUARD_INTERVAL_1_4; break; } switch ((buf[0] >> 4) & 7) { case 0: - p->u.ofdm.hierarchy_information = HIERARCHY_NONE; + c->hierarchy = HIERARCHY_NONE; break; case 1: - p->u.ofdm.hierarchy_information = HIERARCHY_1; + c->hierarchy = HIERARCHY_1; break; case 2: - p->u.ofdm.hierarchy_information = HIERARCHY_2; + c->hierarchy = HIERARCHY_2; break; case 3: - p->u.ofdm.hierarchy_information = HIERARCHY_4; + c->hierarchy = HIERARCHY_4; break; } switch ((buf[2] >> 0) & 7) { case 0: - p->u.ofdm.code_rate_HP = FEC_1_2; + c->code_rate_HP = FEC_1_2; break; case 1: - p->u.ofdm.code_rate_HP = FEC_2_3; - break; - case 2: - p->u.ofdm.code_rate_HP = FEC_3_4; - break; - case 3: - p->u.ofdm.code_rate_HP = FEC_5_6; - break; - case 4: - p->u.ofdm.code_rate_HP = FEC_7_8; - break; - } - - switch ((buf[2] >> 3) & 7) { - case 0: - p->u.ofdm.code_rate_LP = FEC_1_2; - break; - case 1: - p->u.ofdm.code_rate_LP = FEC_2_3; - break; - case 2: - p->u.ofdm.code_rate_LP = FEC_3_4; - break; - case 3: - p->u.ofdm.code_rate_LP = FEC_5_6; - break; - case 4: - p->u.ofdm.code_rate_LP = FEC_7_8; - break; - } - - switch ((buf[1] >> 2) & 3) { - case 0: - p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; - break; - case 1: - p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; - break; - case 2: - p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; - break; - } - - p->inversion = INVERSION_AUTO; - p->frequency = state->frequency; - -error: - return ret; -} - -static int af9013_update_ber_unc(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret; - u8 buf[3], i; - u32 error_bit_count = 0; - u32 total_bit_count = 0; - u32 abort_packet_count = 0; - - state->ber = 0; - - /* check if error bit count is ready */ - ret = af9013_read_reg_bits(state, 0xd391, 4, 1, &buf[0]); - if (ret) - goto error; - if (!buf[0]) - goto exit; - - /* get RSD packet abort count */ - for (i = 0; i < 2; i++) { - ret = af9013_read_reg(state, 0xd38a + i, &buf[i]); - if (ret) - goto error; - } - abort_packet_count = (buf[1] << 8) + buf[0]; - - /* get error bit count */ - for (i = 0; i < 3; i++) { - ret = af9013_read_reg(state, 0xd387 + i, &buf[i]); - if (ret) - goto error; - } - error_bit_count = (buf[2] << 16) + (buf[1] << 8) + buf[0]; - error_bit_count = error_bit_count - abort_packet_count * 8 * 8; - - /* get used RSD counting period (10000 RSD packets used) */ - for (i = 0; i < 2; i++) { - ret = af9013_read_reg(state, 0xd385 + i, &buf[i]); - if (ret) - goto error; - } - total_bit_count = (buf[1] << 8) + buf[0]; - total_bit_count = total_bit_count - abort_packet_count; - total_bit_count = total_bit_count * 204 * 8; - - if (total_bit_count) - state->ber = error_bit_count * 1000000000 / total_bit_count; - - state->ucblocks += abort_packet_count; - - deb_info("%s: err bits:%d total bits:%d abort count:%d\n", __func__, - error_bit_count, total_bit_count, abort_packet_count); - - /* set BER counting range */ - ret = af9013_write_reg(state, 0xd385, 10000 & 0xff); - if (ret) - goto error; - ret = af9013_write_reg(state, 0xd386, 10000 >> 8); - if (ret) - goto error; - /* reset and start BER counter */ - ret = af9013_write_reg_bits(state, 0xd391, 4, 1, 1); - if (ret) - goto error; - -exit: -error: - return ret; -} - -static int af9013_update_snr(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret; - u8 buf[3], i, len; - u32 quant = 0; - struct snr_table *uninitialized_var(snr_table); - - /* check if quantizer ready (for snr) */ - ret = af9013_read_reg_bits(state, 0xd2e1, 3, 1, &buf[0]); - if (ret) - goto error; - if (buf[0]) { - /* quantizer ready - read it */ - for (i = 0; i < 3; i++) { - ret = af9013_read_reg(state, 0xd2e3 + i, &buf[i]); - if (ret) - goto error; - } - quant = (buf[2] << 16) + (buf[1] << 8) + buf[0]; - - /* read current constellation */ - ret = af9013_read_reg(state, 0xd3c1, &buf[0]); - if (ret) - goto error; - - switch ((buf[0] >> 6) & 3) { - case 0: - len = ARRAY_SIZE(qpsk_snr_table); - snr_table = qpsk_snr_table; - break; - case 1: - len = ARRAY_SIZE(qam16_snr_table); - snr_table = qam16_snr_table; - break; - case 2: - len = ARRAY_SIZE(qam64_snr_table); - snr_table = qam64_snr_table; - break; - default: - len = 0; - break; - } - - if (len) { - for (i = 0; i < len; i++) { - if (quant < snr_table[i].val) { - state->snr = snr_table[i].snr * 10; - break; - } - } - } - - /* set quantizer super frame count */ - ret = af9013_write_reg(state, 0xd2e2, 1); - if (ret) - goto error; - - /* check quantizer availability */ - for (i = 0; i < 10; i++) { - msleep(10); - ret = af9013_read_reg_bits(state, 0xd2e6, 0, 1, - &buf[0]); - if (ret) - goto error; - if (!buf[0]) - break; - } - - /* reset quantizer */ - ret = af9013_write_reg_bits(state, 0xd2e1, 3, 1, 1); - if (ret) - goto error; + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; } -error: - return ret; -} - -static int af9013_update_signal_strength(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret = 0; - u8 rf_gain, if_gain; - int signal_strength; - - deb_info("%s\n", __func__); + switch ((buf[2] >> 3) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } - if (state->signal_strength_en) { - ret = af9013_read_reg(state, 0xd07c, &rf_gain); - if (ret) - goto error; - ret = af9013_read_reg(state, 0xd07d, &if_gain); - if (ret) - goto error; - signal_strength = (0xffff / \ - (9 * (state->rf_50 + state->if_50) - \ - 11 * (state->rf_80 + state->if_80))) * \ - (10 * (rf_gain + if_gain) - \ - 11 * (state->rf_80 + state->if_80)); - if (signal_strength < 0) - signal_strength = 0; - else if (signal_strength > 0xffff) - signal_strength = 0xffff; - - state->signal_strength = signal_strength; - } else { - state->signal_strength = 0; + switch ((buf[1] >> 2) & 3) { + case 0: + c->bandwidth_hz = 6000000; + break; + case 1: + c->bandwidth_hz = 7000000; + break; + case 2: + c->bandwidth_hz = 8000000; + break; } -error: return ret; -} - -static int af9013_update_statistics(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret; - - if (time_before(jiffies, state->next_statistics_check)) - return 0; - - /* set minimum statistic update interval */ - state->next_statistics_check = jiffies + msecs_to_jiffies(1200); - - ret = af9013_update_signal_strength(fe); - if (ret) - goto error; - ret = af9013_update_snr(fe); - if (ret) - goto error; - ret = af9013_update_ber_unc(fe); - if (ret) - goto error; - -error: +err: + dbg("%s: failed=%d", __func__, ret); return ret; } -static int af9013_get_tune_settings(struct dvb_frontend *fe, - struct dvb_frontend_tune_settings *fesettings) -{ - fesettings->min_delay_ms = 800; - fesettings->step_size = 0; - fesettings->max_drift = 0; - - return 0; -} - static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct af9013_state *state = fe->demodulator_priv; - int ret = 0; + int ret; u8 tmp; - *status = 0; + + /* + * Return status from the cache if it is younger than 2000ms with the + * exception of last tune is done during 4000ms. + */ + if (time_is_after_jiffies( + state->read_status_jiffies + msecs_to_jiffies(2000)) && + time_is_before_jiffies( + state->set_frontend_jiffies + msecs_to_jiffies(4000)) + ) { + *status = state->fe_status; + return 0; + } else { + *status = 0; + } /* MPEG2 lock */ - ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp); + ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp); if (ret) - goto error; + goto err; + if (tmp) *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; if (!*status) { /* TPS lock */ - ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp); + ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp); if (ret) - goto error; + goto err; + if (tmp) *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI; } - if (!*status) { - /* CFO lock */ - ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); - if (ret) - goto error; - if (tmp) - *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; - } - - if (!*status) { - /* SFOE lock */ - ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); - if (ret) - goto error; - if (tmp) - *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; - } - - if (!*status) { - /* AGC lock */ - ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); - if (ret) - goto error; - if (tmp) - *status |= FE_HAS_SIGNAL; - } - - ret = af9013_update_statistics(fe); + state->fe_status = *status; + state->read_status_jiffies = jiffies; -error: + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } - -static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) +static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) { struct af9013_state *state = fe->demodulator_priv; - int ret; - ret = af9013_update_statistics(fe); - *ber = state->ber; - return ret; + *snr = state->snr; + return 0; } static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct af9013_state *state = fe->demodulator_priv; - int ret; - ret = af9013_update_statistics(fe); *strength = state->signal_strength; - return ret; + return 0; } -static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) +static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) { struct af9013_state *state = fe->demodulator_priv; - int ret; - ret = af9013_update_statistics(fe); - *snr = state->snr; - return ret; + *ber = state->ber; + return 0; } static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { struct af9013_state *state = fe->demodulator_priv; - int ret; - ret = af9013_update_statistics(fe); *ucblocks = state->ucblocks; - return ret; -} - -static int af9013_sleep(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - int ret; - deb_info("%s\n", __func__); - - ret = af9013_lock_led(state, 0); - if (ret) - goto error; - - ret = af9013_power_ctrl(state, 0); -error: - return ret; + return 0; } static int af9013_init(struct dvb_frontend *fe) { struct af9013_state *state = fe->demodulator_priv; int ret, i, len; - u8 tmp0, tmp1; - struct regdesc *init; - deb_info("%s\n", __func__); + u8 buf[3], tmp; + u32 adc_cw; + const struct af9013_reg_bit *init; - /* reset OFDM */ - ret = af9013_reset(state, 0); - if (ret) - goto error; + dbg("%s", __func__); /* power on */ ret = af9013_power_ctrl(state, 1); if (ret) - goto error; + goto err; /* enable ADC */ - ret = af9013_write_reg(state, 0xd73a, 0xa4); + ret = af9013_wr_reg(state, 0xd73a, 0xa4); if (ret) - goto error; + goto err; /* write API version to firmware */ - for (i = 0; i < sizeof(state->config.api_version); i++) { - ret = af9013_write_reg(state, 0x9bf2 + i, - state->config.api_version[i]); - if (ret) - goto error; - } + ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4); + if (ret) + goto err; /* program ADC control */ - ret = af9013_set_adc_ctrl(state); + switch (state->config.clock) { + case 28800000: /* 28.800 MHz */ + tmp = 0; + break; + case 20480000: /* 20.480 MHz */ + tmp = 1; + break; + case 28000000: /* 28.000 MHz */ + tmp = 2; + break; + case 25000000: /* 25.000 MHz */ + tmp = 3; + break; + default: + err("invalid clock"); + return -EINVAL; + } + + adc_cw = af913_div(state->config.clock, 1000000ul, 19); + buf[0] = (adc_cw >> 0) & 0xff; + buf[1] = (adc_cw >> 8) & 0xff; + buf[2] = (adc_cw >> 16) & 0xff; + + ret = af9013_wr_regs(state, 0xd180, buf, 3); + if (ret) + goto err; + + ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp); if (ret) - goto error; + goto err; /* set I2C master clock */ - ret = af9013_write_reg(state, 0xd416, 0x14); + ret = af9013_wr_reg(state, 0xd416, 0x14); if (ret) - goto error; + goto err; /* set 16 embx */ - ret = af9013_write_reg_bits(state, 0xd700, 1, 1, 1); + ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1); if (ret) - goto error; + goto err; /* set no trigger */ - ret = af9013_write_reg_bits(state, 0xd700, 2, 1, 0); + ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0); if (ret) - goto error; + goto err; /* set read-update bit for constellation */ - ret = af9013_write_reg_bits(state, 0xd371, 1, 1, 1); + ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1); if (ret) - goto error; + goto err; - /* enable FEC monitor */ - ret = af9013_write_reg_bits(state, 0xd392, 1, 1, 1); + /* settings for mp2if */ + if (state->config.ts_mode == AF9013_TS_USB) { + /* AF9015 split PSB to 1.5k + 0.5k */ + ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1); + if (ret) + goto err; + } else { + /* AF9013 change the output bit to data7 */ + ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1); + if (ret) + goto err; + + /* AF9013 set mpeg to full speed */ + ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1); + if (ret) + goto err; + } + + ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1); if (ret) - goto error; + goto err; /* load OFSM settings */ - deb_info("%s: load ofsm settings\n", __func__); + dbg("%s: load ofsm settings", __func__); len = ARRAY_SIZE(ofsm_init); init = ofsm_init; for (i = 0; i < len; i++) { - ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, init[i].len, init[i].val); if (ret) - goto error; + goto err; } /* load tuner specific settings */ - deb_info("%s: load tuner specific settings\n", __func__); + dbg("%s: load tuner specific settings", __func__); switch (state->config.tuner) { case AF9013_TUNER_MXL5003D: len = ARRAY_SIZE(tuner_init_mxl5003d); @@ -1237,65 +1199,133 @@ static int af9013_init(struct dvb_frontend *fe) } for (i = 0; i < len; i++) { - ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, init[i].len, init[i].val); if (ret) - goto error; + goto err; } - /* set TS mode */ - deb_info("%s: setting ts mode\n", __func__); - tmp0 = 0; /* parallel mode */ - tmp1 = 0; /* serial mode */ - switch (state->config.output_mode) { - case AF9013_OUTPUT_MODE_PARALLEL: - tmp0 = 1; - break; - case AF9013_OUTPUT_MODE_SERIAL: - tmp1 = 1; - break; - case AF9013_OUTPUT_MODE_USB: - /* usb mode for AF9015 */ - default: - break; - } - ret = af9013_write_reg_bits(state, 0xd500, 1, 1, tmp0); /* parallel */ + /* TS mode */ + ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode); if (ret) - goto error; - ret = af9013_write_reg_bits(state, 0xd500, 2, 1, tmp1); /* serial */ - if (ret) - goto error; + goto err; /* enable lock led */ - ret = af9013_lock_led(state, 1); + ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1); if (ret) - goto error; + goto err; - /* read values needed for signal strength calculation */ - ret = af9013_read_reg_bits(state, 0x9bee, 0, 1, - &state->signal_strength_en); - if (ret) - goto error; + /* check if we support signal strength */ + if (!state->signal_strength_en) { + ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1, + &state->signal_strength_en); + if (ret) + goto err; + } - if (state->signal_strength_en) { - ret = af9013_read_reg(state, 0x9bbd, &state->rf_50); + /* read values needed for signal strength calculation */ + if (state->signal_strength_en && !state->rf_50) { + ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50); if (ret) - goto error; - ret = af9013_read_reg(state, 0x9bd0, &state->rf_80); + goto err; + + ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80); if (ret) - goto error; - ret = af9013_read_reg(state, 0x9be2, &state->if_50); + goto err; + + ret = af9013_rd_reg(state, 0x9be2, &state->if_50); if (ret) - goto error; - ret = af9013_read_reg(state, 0x9be4, &state->if_80); + goto err; + + ret = af9013_rd_reg(state, 0x9be4, &state->if_80); if (ret) - goto error; + goto err; } -error: + /* SNR */ + ret = af9013_wr_reg(state, 0xd2e2, 1); + if (ret) + goto err; + + /* BER / UCB */ + buf[0] = (10000 >> 0) & 0xff; + buf[1] = (10000 >> 8) & 0xff; + ret = af9013_wr_regs(state, 0xd385, buf, 2); + if (ret) + goto err; + + /* enable FEC monitor */ + ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1); + if (ret) + goto err; + + state->first_tune = true; + schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400)); + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int af9013_sleep(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + dbg("%s", __func__); + + /* stop statistics polling */ + cancel_delayed_work_sync(&state->statistics_work); + + /* disable lock led */ + ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0); + if (ret) + goto err; + + /* power off */ + ret = af9013_power_ctrl(state, 0); + if (ret) + goto err; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret; + struct af9013_state *state = fe->demodulator_priv; + + dbg("%s: enable=%d", __func__, enable); + + /* gate already open or close */ + if (state->i2c_gate_state == enable) + return 0; + + if (state->config.ts_mode == AF9013_TS_USB) + ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable); + else + ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable); + if (ret) + goto err; + + state->i2c_gate_state = enable; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); return ret; } +static void af9013_release(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + kfree(state); +} + static struct dvb_frontend_ops af9013_ops; static int af9013_download_firmware(struct af9013_state *state) @@ -1309,11 +1339,11 @@ static int af9013_download_firmware(struct af9013_state *state) msleep(100); /* check whether firmware is already running */ - ret = af9013_read_reg(state, 0x98be, &val); + ret = af9013_rd_reg(state, 0x98be, &val); if (ret) - goto error; + goto err; else - deb_info("%s: firmware status:%02x\n", __func__, val); + dbg("%s: firmware status=%02x", __func__, val); if (val == 0x0c) /* fw is running, no need for download */ goto exit; @@ -1328,7 +1358,7 @@ static int af9013_download_firmware(struct af9013_state *state) "Please see linux/Documentation/dvb/ for more details" \ " on firmware-problems. (%d)", fw_file, ret); - goto error; + goto err; } info("downloading firmware from file '%s'", fw_file); @@ -1346,7 +1376,7 @@ static int af9013_download_firmware(struct af9013_state *state) ret = af9013_write_ofsm_regs(state, 0x50fc, fw_params, sizeof(fw_params)); if (ret) - goto error_release; + goto err_release; #define FW_ADDR 0x5100 /* firmware start address */ #define LEN_MAX 16 /* max packet size */ @@ -1360,24 +1390,24 @@ static int af9013_download_firmware(struct af9013_state *state) (u8 *) &fw->data[fw->size - remaining], len); if (ret) { err("firmware download failed:%d", ret); - goto error_release; + goto err_release; } } /* request boot firmware */ - ret = af9013_write_reg(state, 0xe205, 1); + ret = af9013_wr_reg(state, 0xe205, 1); if (ret) - goto error_release; + goto err_release; for (i = 0; i < 15; i++) { msleep(100); /* check firmware status */ - ret = af9013_read_reg(state, 0x98be, &val); + ret = af9013_rd_reg(state, 0x98be, &val); if (ret) - goto error_release; + goto err_release; - deb_info("%s: firmware status:%02x\n", __func__, val); + dbg("%s: firmware status=%02x", __func__, val); if (val == 0x0c || val == 0x04) /* success or fail */ break; @@ -1385,43 +1415,21 @@ static int af9013_download_firmware(struct af9013_state *state) if (val == 0x04) { err("firmware did not run"); - ret = -1; + ret = -ENODEV; } else if (val != 0x0c) { err("firmware boot timeout"); - ret = -1; + ret = -ENODEV; } -error_release: +err_release: release_firmware(fw); -error: +err: exit: if (!ret) info("found a '%s' in warm state.", af9013_ops.info.name); return ret; } -static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - int ret; - struct af9013_state *state = fe->demodulator_priv; - deb_info("%s: enable:%d\n", __func__, enable); - - if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) - ret = af9013_write_reg_bits(state, 0xd417, 3, 1, enable); - else - ret = af9013_write_reg_bits(state, 0xd607, 2, 1, enable); - - return ret; -} - -static void af9013_release(struct dvb_frontend *fe) -{ - struct af9013_state *state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops af9013_ops; - struct dvb_frontend *af9013_attach(const struct af9013_config *config, struct i2c_adapter *i2c) { @@ -1432,73 +1440,42 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config, /* allocate memory for the internal state */ state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); if (state == NULL) - goto error; + goto err; /* setup the state */ state->i2c = i2c; memcpy(&state->config, config, sizeof(struct af9013_config)); /* download firmware */ - if (state->config.output_mode != AF9013_OUTPUT_MODE_USB) { + if (state->config.ts_mode != AF9013_TS_USB) { ret = af9013_download_firmware(state); if (ret) - goto error; + goto err; } /* firmware version */ - for (i = 0; i < 4; i++) { - ret = af9013_read_reg(state, 0x5103 + i, &buf[i]); - if (ret) - goto error; - } - info("firmware version:%d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]); - - /* chip version */ - ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &buf[2]); + ret = af9013_rd_regs(state, 0x5103, buf, 4); if (ret) - goto error; - - /* ROM version */ - for (i = 0; i < 2; i++) { - ret = af9013_read_reg(state, 0x116b + i, &buf[i]); - if (ret) - goto error; - } - deb_info("%s: chip version:%d ROM version:%d.%d\n", __func__, - buf[2], buf[0], buf[1]); + goto err; - /* settings for mp2if */ - if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) { - /* AF9015 split PSB to 1.5k + 0.5k */ - ret = af9013_write_reg_bits(state, 0xd50b, 2, 1, 1); - } else { - /* AF9013 change the output bit to data7 */ - ret = af9013_write_reg_bits(state, 0xd500, 3, 1, 1); - if (ret) - goto error; - /* AF9013 set mpeg to full speed */ - ret = af9013_write_reg_bits(state, 0xd502, 4, 1, 1); - } - if (ret) - goto error; - ret = af9013_write_reg_bits(state, 0xd520, 4, 1, 1); - if (ret) - goto error; + info("firmware version %d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]); /* set GPIOs */ for (i = 0; i < sizeof(state->config.gpio); i++) { ret = af9013_set_gpio(state, i, state->config.gpio[i]); if (ret) - goto error; + goto err; } /* create dvb_frontend */ - memcpy(&state->frontend.ops, &af9013_ops, + memcpy(&state->fe.ops, &af9013_ops, sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; + state->fe.demodulator_priv = state; + + INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work); - return &state->frontend; -error: + return &state->fe; +err: kfree(state); return NULL; } @@ -1506,17 +1483,22 @@ EXPORT_SYMBOL(af9013_attach); static struct dvb_frontend_ops af9013_ops = { .info = { - .name = "Afatech AF9013 DVB-T", + .name = "Afatech AF9013", .type = FE_OFDM, .frequency_min = 174000000, .frequency_max = 862000000, .frequency_stepsize = 250000, .frequency_tolerance = 0, - .caps = - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | - FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO | @@ -1525,24 +1507,22 @@ static struct dvb_frontend_ops af9013_ops = { }, .release = af9013_release, + .init = af9013_init, .sleep = af9013_sleep, - .i2c_gate_ctrl = af9013_i2c_gate_ctrl, + .get_tune_settings = af9013_get_tune_settings, .set_frontend = af9013_set_frontend, .get_frontend = af9013_get_frontend, - .get_tune_settings = af9013_get_tune_settings, - .read_status = af9013_read_status, - .read_ber = af9013_read_ber, - .read_signal_strength = af9013_read_signal_strength, .read_snr = af9013_read_snr, + .read_signal_strength = af9013_read_signal_strength, + .read_ber = af9013_read_ber, .read_ucblocks = af9013_read_ucblocks, -}; -module_param_named(debug, af9013_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + .i2c_gate_ctrl = af9013_i2c_gate_ctrl, +}; MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h index e53d873f7555..b973fc5a0384 100644 --- a/drivers/media/dvb/frontends/af9013.h +++ b/drivers/media/dvb/frontends/af9013.h @@ -2,6 +2,7 @@ * Afatech AF9013 demodulator driver * * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari * * Thanks to Afatech who kindly provided information. * @@ -21,33 +22,11 @@ * */ -#ifndef _AF9013_H_ -#define _AF9013_H_ +#ifndef AF9013_H +#define AF9013_H #include -enum af9013_ts_mode { - AF9013_OUTPUT_MODE_PARALLEL, - AF9013_OUTPUT_MODE_SERIAL, - AF9013_OUTPUT_MODE_USB, /* only for AF9015 */ -}; - -enum af9013_tuner { - AF9013_TUNER_MXL5003D = 3, /* MaxLinear */ - AF9013_TUNER_MXL5005D = 13, /* MaxLinear */ - AF9013_TUNER_MXL5005R = 30, /* MaxLinear */ - AF9013_TUNER_ENV77H11D5 = 129, /* Panasonic */ - AF9013_TUNER_MT2060 = 130, /* Microtune */ - AF9013_TUNER_MC44S803 = 133, /* Freescale */ - AF9013_TUNER_QT1010 = 134, /* Quantek */ - AF9013_TUNER_UNKNOWN = 140, /* for can tuners ? */ - AF9013_TUNER_MT2060_2 = 147, /* Microtune */ - AF9013_TUNER_TDA18271 = 156, /* NXP */ - AF9013_TUNER_QT1010A = 162, /* Quantek */ - AF9013_TUNER_MXL5007T = 177, /* MaxLinear */ - AF9013_TUNER_TDA18218 = 179, /* NXP */ -}; - /* AF9013/5 GPIOs (mostly guessed) demod#1-gpio#0 - set demod#2 i2c-addr for dual devices demod#1-gpio#1 - xtal setting (?) @@ -55,44 +34,74 @@ enum af9013_tuner { demod#2-gpio#0 - tuner#2 demod#2-gpio#1 - xtal setting (?) */ + +struct af9013_config { + /* + * I2C address + */ + u8 i2c_addr; + + /* + * clock + * 20480000, 25000000, 28000000, 28800000 + */ + u32 clock; + + /* + * tuner + */ +#define AF9013_TUNER_MXL5003D 3 /* MaxLinear */ +#define AF9013_TUNER_MXL5005D 13 /* MaxLinear */ +#define AF9013_TUNER_MXL5005R 30 /* MaxLinear */ +#define AF9013_TUNER_ENV77H11D5 129 /* Panasonic */ +#define AF9013_TUNER_MT2060 130 /* Microtune */ +#define AF9013_TUNER_MC44S803 133 /* Freescale */ +#define AF9013_TUNER_QT1010 134 /* Quantek */ +#define AF9013_TUNER_UNKNOWN 140 /* for can tuners ? */ +#define AF9013_TUNER_MT2060_2 147 /* Microtune */ +#define AF9013_TUNER_TDA18271 156 /* NXP */ +#define AF9013_TUNER_QT1010A 162 /* Quantek */ +#define AF9013_TUNER_MXL5007T 177 /* MaxLinear */ +#define AF9013_TUNER_TDA18218 179 /* NXP */ + u8 tuner; + + /* + * IF frequency + */ + u32 if_frequency; + + /* + * TS settings + */ +#define AF9013_TS_USB 0 +#define AF9013_TS_PARALLEL 1 +#define AF9013_TS_SERIAL 2 + u8 ts_mode:2; + + /* + * input spectrum inversion + */ + bool spec_inv; + + /* + * firmware API version + */ + u8 api_version[4]; + + /* + * GPIOs + */ #define AF9013_GPIO_ON (1 << 0) #define AF9013_GPIO_EN (1 << 1) #define AF9013_GPIO_O (1 << 2) #define AF9013_GPIO_I (1 << 3) - #define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN) #define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) - #define AF9013_GPIO_TUNER_ON (AF9013_GPIO_ON|AF9013_GPIO_EN) #define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) - -struct af9013_config { - /* demodulator's I2C address */ - u8 demod_address; - - /* frequencies in kHz */ - u32 adc_clock; - - /* tuner ID */ - u8 tuner; - - /* tuner IF */ - u16 tuner_if; - - /* TS data output mode */ - u8 output_mode:2; - - /* RF spectrum inversion */ - u8 rf_spec_inv:1; - - /* API version */ - u8 api_version[4]; - - /* GPIOs */ u8 gpio[4]; }; - #if defined(CONFIG_DVB_AF9013) || \ (defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE)) extern struct dvb_frontend *af9013_attach(const struct af9013_config *config, @@ -106,4 +115,4 @@ const struct af9013_config *config, struct i2c_adapter *i2c) } #endif /* CONFIG_DVB_AF9013 */ -#endif /* _AF9013_H_ */ +#endif /* AF9013_H */ diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb/frontends/af9013_priv.h index e00b2a4a2db6..fa848af6e9b4 100644 --- a/drivers/media/dvb/frontends/af9013_priv.h +++ b/drivers/media/dvb/frontends/af9013_priv.h @@ -2,6 +2,7 @@ * Afatech AF9013 demodulator driver * * Copyright (C) 2007 Antti Palosaari + * Copyright (C) 2011 Antti Palosaari * * Thanks to Afatech who kindly provided information. * @@ -21,24 +22,19 @@ * */ -#ifndef _AF9013_PRIV_ -#define _AF9013_PRIV_ +#ifndef AF9013_PRIV_H +#define AF9013_PRIV_H -#define LOG_PREFIX "af9013" -extern int af9013_debug; - -#define dprintk(var, level, args...) \ - do { if ((var & level)) printk(args); } while (0) +#include "dvb_frontend.h" +#include "af9013.h" +#include -#define debug_dump(b, l, func) {\ - int loop_; \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ -} - -#define deb_info(args...) dprintk(af9013_debug, 0x01, args) +#define LOG_PREFIX "af9013" +#undef dbg +#define dbg(f, arg...) \ + if (af9013_debug) \ + printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) #undef err #define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) #undef info @@ -48,70 +44,71 @@ extern int af9013_debug; #define AF9013_DEFAULT_FIRMWARE "dvb-fe-af9013.fw" -struct regdesc { +struct af9013_reg_bit { u16 addr; u8 pos:4; u8 len:4; u8 val; }; -struct snr_table { +struct af9013_snr { u32 val; u8 snr; }; -struct coeff { - u32 adc_clock; - fe_bandwidth_t bw; +struct af9013_coeff { + u32 clock; + u32 bandwidth_hz; u8 val[24]; }; /* pre-calculated coeff lookup table */ -static struct coeff coeff_table[] = { +static const struct af9013_coeff coeff_lut[] = { /* 28.800 MHz */ - { 28800, BANDWIDTH_8_MHZ, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14, + { 28800000, 8000000, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14, 0x51, 0x11, 0x00, 0xa2, 0x8f, 0x3d, 0x00, 0xa2, 0x8a, 0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } }, - { 28800, BANDWIDTH_7_MHZ, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71, + { 28800000, 7000000, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71, 0xc7, 0x07, 0x00, 0x8e, 0x3d, 0x55, 0x00, 0x8e, 0x38, 0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } }, - { 28800, BANDWIDTH_6_MHZ, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf, + { 28800000, 6000000, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf, 0x3c, 0x3d, 0x00, 0x79, 0xeb, 0x6e, 0x00, 0x79, 0xe7, 0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } }, /* 20.480 MHz */ - { 20480, BANDWIDTH_8_MHZ, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24, + { 20480000, 8000000, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24, 0x92, 0x13, 0x00, 0xe4, 0x99, 0x6e, 0x00, 0xe4, 0x92, 0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } }, - { 20480, BANDWIDTH_7_MHZ, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40, + { 20480000, 7000000, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40, 0x00, 0x00, 0x00, 0xc8, 0x06, 0x40, 0x00, 0xc8, 0x00, 0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } }, - { 20480, BANDWIDTH_6_MHZ, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b, + { 20480000, 6000000, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b, 0x6d, 0x2e, 0x00, 0xab, 0x73, 0x13, 0x00, 0xab, 0x6d, 0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } }, /* 28.000 MHz */ - { 28000, BANDWIDTH_8_MHZ, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39, + { 28000000, 8000000, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39, 0x78, 0x0a, 0x00, 0xa7, 0x34, 0x3f, 0x00, 0xa7, 0x2f, 0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } }, - { 28000, BANDWIDTH_7_MHZ, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92, + { 28000000, 7000000, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92, 0x49, 0x09, 0x00, 0x92, 0x4d, 0xb7, 0x00, 0x92, 0x49, 0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } }, - { 28000, BANDWIDTH_6_MHZ, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb, + { 28000000, 6000000, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb, 0x1a, 0x08, 0x00, 0x7d, 0x67, 0x2f, 0x00, 0x7d, 0x63, 0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } }, /* 25.000 MHz */ - { 25000, BANDWIDTH_8_MHZ, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9, + { 25000000, 8000000, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9, 0xf7, 0x0e, 0x00, 0xbb, 0x44, 0xc1, 0x00, 0xbb, 0x3e, 0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } }, - { 25000, BANDWIDTH_7_MHZ, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e, + { 25000000, 7000000, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e, 0xb8, 0x14, 0x00, 0xa3, 0xdc, 0x29, 0x00, 0xa3, 0xd7, 0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } }, - { 25000, BANDWIDTH_6_MHZ, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63, + { 25000000, 6000000, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63, 0x79, 0x1b, 0x00, 0x8c, 0x73, 0x91, 0x00, 0x8c, 0x6f, 0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } }, }; /* QPSK SNR lookup table */ -static struct snr_table qpsk_snr_table[] = { +static const struct af9013_snr qpsk_snr_lut[] = { + { 0x000000, 0 }, { 0x0b4771, 0 }, { 0x0c1aed, 1 }, { 0x0d0d27, 2 }, @@ -131,7 +128,8 @@ static struct snr_table qpsk_snr_table[] = { }; /* QAM16 SNR lookup table */ -static struct snr_table qam16_snr_table[] = { +static const struct af9013_snr qam16_snr_lut[] = { + { 0x000000, 0 }, { 0x05eb62, 5 }, { 0x05fecf, 6 }, { 0x060b80, 7 }, @@ -151,7 +149,8 @@ static struct snr_table qam16_snr_table[] = { }; /* QAM64 SNR lookup table */ -static struct snr_table qam64_snr_table[] = { +static const struct af9013_snr qam64_snr_lut[] = { + { 0x000000, 0 }, { 0x03109b, 12 }, { 0x0310d4, 13 }, { 0x031920, 14 }, @@ -170,7 +169,7 @@ static struct snr_table qam64_snr_table[] = { { 0xffffff, 27 }, }; -static struct regdesc ofsm_init[] = { +static const struct af9013_reg_bit ofsm_init[] = { { 0xd73a, 0, 8, 0xa1 }, { 0xd73b, 0, 8, 0x1f }, { 0xd73c, 4, 4, 0x0a }, @@ -252,7 +251,7 @@ static struct regdesc ofsm_init[] = { /* Panasonic ENV77H11D5 tuner init AF9013_TUNER_ENV77H11D5 = 129 */ -static struct regdesc tuner_init_env77h11d5[] = { +static const struct af9013_reg_bit tuner_init_env77h11d5[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x03 }, { 0x9bbe, 0, 8, 0x01 }, @@ -318,7 +317,7 @@ static struct regdesc tuner_init_env77h11d5[] = { /* Microtune MT2060 tuner init AF9013_TUNER_MT2060 = 130 */ -static struct regdesc tuner_init_mt2060[] = { +static const struct af9013_reg_bit tuner_init_mt2060[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x07 }, { 0xd1a0, 1, 1, 0x01 }, @@ -395,7 +394,7 @@ static struct regdesc tuner_init_mt2060[] = { /* Microtune MT2060 tuner init AF9013_TUNER_MT2060_2 = 147 */ -static struct regdesc tuner_init_mt2060_2[] = { +static const struct af9013_reg_bit tuner_init_mt2060_2[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x06 }, { 0x9bbe, 0, 8, 0x01 }, @@ -462,7 +461,7 @@ static struct regdesc tuner_init_mt2060_2[] = { /* MaxLinear MXL5003 tuner init AF9013_TUNER_MXL5003D = 3 */ -static struct regdesc tuner_init_mxl5003d[] = { +static const struct af9013_reg_bit tuner_init_mxl5003d[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x09 }, { 0xd1a0, 1, 1, 0x01 }, @@ -534,7 +533,7 @@ static struct regdesc tuner_init_mxl5003d[] = { AF9013_TUNER_MXL5005D = 13 AF9013_TUNER_MXL5005R = 30 AF9013_TUNER_MXL5007T = 177 */ -static struct regdesc tuner_init_mxl5005[] = { +static const struct af9013_reg_bit tuner_init_mxl5005[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x07 }, { 0xd1a0, 1, 1, 0x01 }, @@ -613,7 +612,7 @@ static struct regdesc tuner_init_mxl5005[] = { /* Quantek QT1010 tuner init AF9013_TUNER_QT1010 = 134 AF9013_TUNER_QT1010A = 162 */ -static struct regdesc tuner_init_qt1010[] = { +static const struct af9013_reg_bit tuner_init_qt1010[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x09 }, { 0xd1a0, 1, 1, 0x01 }, @@ -690,7 +689,7 @@ static struct regdesc tuner_init_qt1010[] = { /* Freescale MC44S803 tuner init AF9013_TUNER_MC44S803 = 133 */ -static struct regdesc tuner_init_mc44s803[] = { +static const struct af9013_reg_bit tuner_init_mc44s803[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x06 }, { 0xd1a0, 1, 1, 0x01 }, @@ -772,7 +771,7 @@ static struct regdesc tuner_init_mc44s803[] = { /* unknown, probably for tin can tuner, tuner init AF9013_TUNER_UNKNOWN = 140 */ -static struct regdesc tuner_init_unknown[] = { +static const struct af9013_reg_bit tuner_init_unknown[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x02 }, { 0xd1a0, 1, 1, 0x01 }, @@ -845,7 +844,7 @@ static struct regdesc tuner_init_unknown[] = { /* NXP TDA18271 & TDA18218 tuner init AF9013_TUNER_TDA18271 = 156 AF9013_TUNER_TDA18218 = 179 */ -static struct regdesc tuner_init_tda18271[] = { +static const struct af9013_reg_bit tuner_init_tda18271[] = { { 0x9bd5, 0, 8, 0x01 }, { 0x9bd6, 0, 8, 0x04 }, { 0xd1a0, 1, 1, 0x01 }, @@ -920,4 +919,4 @@ static struct regdesc tuner_init_tda18271[] = { { 0x9bee, 0, 1, 0x01 }, }; -#endif /* _AF9013_PRIV_ */ +#endif /* AF9013_PRIV_H */