From: Rafał Miłecki Date: Sun, 5 Apr 2015 16:39:27 +0000 (+0200) Subject: ssb: add delay after PCI reset to fix SoC reboots X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f56d9e23b78e311fbd992a1bd80b8bf2adaee29b;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ssb: add delay after PCI reset to fix SoC reboots Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo --- diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index d75b72ba2672..15a7ee3859dd 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -357,6 +357,15 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); + /* + * Accessing PCI config without a proper delay after devices reset (not + * GPIO reset) was causing reboots on WRT300N v1.0. + * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it + * completely. Flushing all writes was also tested but with no luck. + */ + if (pc->dev->bus->chip_id == 0x4704) + usleep_range(1000, 2000); + /* Enable PCI bridge BAR0 prefetch and burst */ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);