From: Tomas Novotny Date: Wed, 10 Dec 2014 23:53:57 +0000 (-0800) Subject: rtc: ds1307: add support for mcp7940x chips X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f4199f8557774cfa38682c89c37388fa30367767;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git rtc: ds1307: add support for mcp7940x chips MCP7940x is same RTC as MCP7941x. The difference is that MCP7941x chips contain additional EEPROM on a different i2c address. DS1307 driver already supports MCP7941x, so just add a new i2c device id and rename functions and defines accordingly. Signed-off-by: Tomas Novotny Cc: Alessandro Zummo Cc: Grant Likely Cc: Rob Herring Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index bb43cf703efc..4ffabb322a9a 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -35,7 +35,7 @@ enum ds_type { ds_1388, ds_3231, m41t00, - mcp7941x, + mcp794xx, rx_8025, last_ds_type /* always last */ /* rs5c372 too? different address... */ @@ -46,7 +46,7 @@ enum ds_type { #define DS1307_REG_SECS 0x00 /* 00-59 */ # define DS1307_BIT_CH 0x80 # define DS1340_BIT_nEOSC 0x80 -# define MCP7941X_BIT_ST 0x80 +# define MCP794XX_BIT_ST 0x80 #define DS1307_REG_MIN 0x01 /* 00-59 */ #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */ @@ -54,7 +54,7 @@ enum ds_type { # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ #define DS1307_REG_WDAY 0x03 /* 01-07 */ -# define MCP7941X_BIT_VBATEN 0x08 +# define MCP794XX_BIT_VBATEN 0x08 #define DS1307_REG_MDAY 0x04 /* 01-31 */ #define DS1307_REG_MONTH 0x05 /* 01-12 */ # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ @@ -159,7 +159,7 @@ static struct chip_desc chips[last_ds_type] = { [ds_3231] = { .alarm = 1, }, - [mcp7941x] = { + [mcp794xx] = { .alarm = 1, /* this is battery backed SRAM */ .nvram_offset = 0x20, @@ -176,7 +176,8 @@ static const struct i2c_device_id ds1307_id[] = { { "ds1340", ds_1340 }, { "ds3231", ds_3231 }, { "m41t00", m41t00 }, - { "mcp7941x", mcp7941x }, + { "mcp7940x", mcp794xx }, + { "mcp7941x", mcp794xx }, { "pt7c4338", ds_1307 }, { "rx8025", rx_8025 }, { } @@ -439,14 +440,14 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t) buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | DS1340_BIT_CENTURY; break; - case mcp7941x: + case mcp794xx: /* * these bits were cleared when preparing the date/time * values and need to be set again before writing the * buffer out to the device. */ - buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST; - buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN; + buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST; + buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN; break; default: break; @@ -614,26 +615,26 @@ static const struct rtc_class_ops ds13xx_rtc_ops = { /*----------------------------------------------------------------------*/ /* - * Alarm support for mcp7941x devices. + * Alarm support for mcp794xx devices. */ -#define MCP7941X_REG_CONTROL 0x07 -# define MCP7941X_BIT_ALM0_EN 0x10 -# define MCP7941X_BIT_ALM1_EN 0x20 -#define MCP7941X_REG_ALARM0_BASE 0x0a -#define MCP7941X_REG_ALARM0_CTRL 0x0d -#define MCP7941X_REG_ALARM1_BASE 0x11 -#define MCP7941X_REG_ALARM1_CTRL 0x14 -# define MCP7941X_BIT_ALMX_IF (1 << 3) -# define MCP7941X_BIT_ALMX_C0 (1 << 4) -# define MCP7941X_BIT_ALMX_C1 (1 << 5) -# define MCP7941X_BIT_ALMX_C2 (1 << 6) -# define MCP7941X_BIT_ALMX_POL (1 << 7) -# define MCP7941X_MSK_ALMX_MATCH (MCP7941X_BIT_ALMX_C0 | \ - MCP7941X_BIT_ALMX_C1 | \ - MCP7941X_BIT_ALMX_C2) - -static void mcp7941x_work(struct work_struct *work) +#define MCP794XX_REG_CONTROL 0x07 +# define MCP794XX_BIT_ALM0_EN 0x10 +# define MCP794XX_BIT_ALM1_EN 0x20 +#define MCP794XX_REG_ALARM0_BASE 0x0a +#define MCP794XX_REG_ALARM0_CTRL 0x0d +#define MCP794XX_REG_ALARM1_BASE 0x11 +#define MCP794XX_REG_ALARM1_CTRL 0x14 +# define MCP794XX_BIT_ALMX_IF (1 << 3) +# define MCP794XX_BIT_ALMX_C0 (1 << 4) +# define MCP794XX_BIT_ALMX_C1 (1 << 5) +# define MCP794XX_BIT_ALMX_C2 (1 << 6) +# define MCP794XX_BIT_ALMX_POL (1 << 7) +# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \ + MCP794XX_BIT_ALMX_C1 | \ + MCP794XX_BIT_ALMX_C2) + +static void mcp794xx_work(struct work_struct *work) { struct ds1307 *ds1307 = container_of(work, struct ds1307, work); struct i2c_client *client = ds1307->client; @@ -642,22 +643,22 @@ static void mcp7941x_work(struct work_struct *work) mutex_lock(&ds1307->rtc->ops_lock); /* Check and clear alarm 0 interrupt flag. */ - reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_ALARM0_CTRL); + reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL); if (reg < 0) goto out; - if (!(reg & MCP7941X_BIT_ALMX_IF)) + if (!(reg & MCP794XX_BIT_ALMX_IF)) goto out; - reg &= ~MCP7941X_BIT_ALMX_IF; - ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_ALARM0_CTRL, reg); + reg &= ~MCP794XX_BIT_ALMX_IF; + ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg); if (ret < 0) goto out; /* Disable alarm 0. */ - reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL); + reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL); if (reg < 0) goto out; - reg &= ~MCP7941X_BIT_ALM0_EN; - ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg); + reg &= ~MCP794XX_BIT_ALM0_EN; + ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg); if (ret < 0) goto out; @@ -669,7 +670,7 @@ out: mutex_unlock(&ds1307->rtc->ops_lock); } -static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t) +static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); @@ -680,11 +681,11 @@ static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t) return -EINVAL; /* Read control and alarm 0 registers. */ - ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs); + ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs); if (ret < 0) return ret; - t->enabled = !!(regs[0] & MCP7941X_BIT_ALM0_EN); + t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN); /* Report alarm 0 time assuming 24-hour and day-of-month modes. */ t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f); @@ -701,14 +702,14 @@ static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t) "enabled=%d polarity=%d irq=%d match=%d\n", __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour, t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled, - !!(ds1307->regs[6] & MCP7941X_BIT_ALMX_POL), - !!(ds1307->regs[6] & MCP7941X_BIT_ALMX_IF), - (ds1307->regs[6] & MCP7941X_MSK_ALMX_MATCH) >> 4); + !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL), + !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF), + (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4); return 0; } -static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t) +static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); @@ -725,7 +726,7 @@ static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t) t->enabled, t->pending); /* Read control and alarm 0 registers. */ - ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs); + ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs); if (ret < 0) return ret; @@ -738,23 +739,23 @@ static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t) regs[8] = bin2bcd(t->time.tm_mon) + 1; /* Clear the alarm 0 interrupt flag. */ - regs[6] &= ~MCP7941X_BIT_ALMX_IF; + regs[6] &= ~MCP794XX_BIT_ALMX_IF; /* Set alarm match: second, minute, hour, day, date, month. */ - regs[6] |= MCP7941X_MSK_ALMX_MATCH; + regs[6] |= MCP794XX_MSK_ALMX_MATCH; if (t->enabled) - regs[0] |= MCP7941X_BIT_ALM0_EN; + regs[0] |= MCP794XX_BIT_ALM0_EN; else - regs[0] &= ~MCP7941X_BIT_ALM0_EN; + regs[0] &= ~MCP794XX_BIT_ALM0_EN; - ret = ds1307->write_block_data(client, MCP7941X_REG_CONTROL, 10, regs); + ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs); if (ret < 0) return ret; return 0; } -static int mcp7941x_alarm_irq_enable(struct device *dev, unsigned int enabled) +static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); @@ -763,24 +764,24 @@ static int mcp7941x_alarm_irq_enable(struct device *dev, unsigned int enabled) if (!test_bit(HAS_ALARM, &ds1307->flags)) return -EINVAL; - reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL); + reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL); if (reg < 0) return reg; if (enabled) - reg |= MCP7941X_BIT_ALM0_EN; + reg |= MCP794XX_BIT_ALM0_EN; else - reg &= ~MCP7941X_BIT_ALM0_EN; + reg &= ~MCP794XX_BIT_ALM0_EN; - return i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg); + return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg); } -static const struct rtc_class_ops mcp7941x_rtc_ops = { +static const struct rtc_class_ops mcp794xx_rtc_ops = { .read_time = ds1307_get_time, .set_time = ds1307_set_time, - .read_alarm = mcp7941x_read_alarm, - .set_alarm = mcp7941x_set_alarm, - .alarm_irq_enable = mcp7941x_alarm_irq_enable, + .read_alarm = mcp794xx_read_alarm, + .set_alarm = mcp794xx_set_alarm, + .alarm_irq_enable = mcp794xx_alarm_irq_enable, }; /*----------------------------------------------------------------------*/ @@ -1049,10 +1050,10 @@ static int ds1307_probe(struct i2c_client *client, case ds_1388: ds1307->offset = 1; /* Seconds starts at 1 */ break; - case mcp7941x: - rtc_ops = &mcp7941x_rtc_ops; + case mcp794xx: + rtc_ops = &mcp794xx_rtc_ops; if (ds1307->client->irq > 0 && chip->alarm) { - INIT_WORK(&ds1307->work, mcp7941x_work); + INIT_WORK(&ds1307->work, mcp794xx_work); want_irq = true; } break; @@ -1117,18 +1118,18 @@ read_rtc: dev_warn(&client->dev, "SET TIME!\n"); } break; - case mcp7941x: + case mcp794xx: /* make sure that the backup battery is enabled */ - if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) { + if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) { i2c_smbus_write_byte_data(client, DS1307_REG_WDAY, ds1307->regs[DS1307_REG_WDAY] - | MCP7941X_BIT_VBATEN); + | MCP794XX_BIT_VBATEN); } /* clock halted? turn it on, so clock can tick. */ - if (!(tmp & MCP7941X_BIT_ST)) { + if (!(tmp & MCP794XX_BIT_ST)) { i2c_smbus_write_byte_data(client, DS1307_REG_SECS, - MCP7941X_BIT_ST); + MCP794XX_BIT_ST); dev_warn(&client->dev, "SET TIME!\n"); goto read_rtc; }