From: Michael Sprecher Date: Wed, 10 Mar 2010 12:15:35 +0000 (+0100) Subject: Staging: et131x: fix most coding style issues in et131x X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f3fd4cd59132ff81be9507762d00afa9445827b6;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git Staging: et131x: fix most coding style issues in et131x This is a patch to the et131x driver that fixes up almost all coding style issues Signed-off-by: Michael Sprecher Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index ea746ba41fa..e6c8cb3828e 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -117,7 +117,7 @@ /* * Software reset reg at address 0x0028 - * 0: txdma_sw_reset + * 0: txdma_sw_reset * 1: rxdma_sw_reset * 2: txmac_sw_reset * 3: rxmac_sw_reset @@ -1052,7 +1052,7 @@ typedef struct _RXMAC_t { /* Location: */ * 4-0: register */ -#define MII_ADDR(phy,reg) ((phy) << 8 | (reg)) +#define MII_ADDR(phy, reg) ((phy) << 8 | (reg)) /* * structure for MII Management Control reg in mac address map. @@ -1249,8 +1249,7 @@ typedef struct _MAC_t { /* Location: */ /* * MAC STATS Module of JAGCore Address Mapping */ -struct macstat_regs -{ /* Location: */ +struct macstat_regs { /* Location: */ u32 pad[32]; /* 0x6000 - 607C */ /* Tx/Rx 0-64 Byte Frame Counter */ diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c index e4d095b0b52..5a8e6b913da 100644 --- a/drivers/staging/et131x/et1310_eeprom.c +++ b/drivers/staging/et131x/et1310_eeprom.c @@ -302,7 +302,7 @@ static int eeprom_read(struct et131x_adapter *etdev, u32 addr, u8 *pdata) err = eeprom_wait_ready(pdev, NULL); if (err) return err; - /* + /* * Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0, * and bits 1:0 both =0. Bit 5 should be set according to the type * of EEPROM being accessed (1=two byte addressing, 0=one byte @@ -383,9 +383,9 @@ int et131x_init_eeprom(struct et131x_adapter *etdev) /* This error could mean that there was an error * reading the eeprom or that the eeprom doesn't exist. - * We will treat each case the same and not try to gather - * additional information that normally would come from the - * eeprom, like MAC Address + * We will treat each case the same and not try to + * gather additional information that normally would + * come from the eeprom, like MAC Address */ etdev->has_eeprom = 0; return -EIO; diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 34cd5d1b586..a6d9f29ff49 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -344,7 +344,7 @@ static void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, u16 duplex) static void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, u16 speed) { u16 data; - static const u16 bits[3]={0x0000, 0x2000, 0x0040}; + static const u16 bits[3] = {0x0000, 0x2000, 0x0040}; /* Read the PHY control register */ MiRead(etdev, PHY_CONTROL, &data); diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 54686e2ace6..8f5dcebda76 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -344,7 +344,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) "Cannot alloc memory for Packet Status Ring\n"); return -ENOMEM; } - printk("PSR %lx\n", (unsigned long) rx_ring->pPSRingPa); + printk(KERN_INFO "PSR %lx\n", (unsigned long) rx_ring->pPSRingPa); /* * NOTE : pci_alloc_consistent(), used above to alloc DMA regions, @@ -363,7 +363,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) return -ENOMEM; } rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD; - printk("PRS %lx\n", (unsigned long)rx_ring->rx_status_bus); + printk(KERN_INFO "PRS %lx\n", (unsigned long)rx_ring->rx_status_bus); /* Recv * pci_pool_create initializes a lookaside list. After successful @@ -445,10 +445,10 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) rx_ring->pFbr1RingVa - rx_ring->Fbr1offset); bufsize = (sizeof(struct fbr_desc) * rx_ring->Fbr1NumEntries) - + 0xfff; + + 0xfff; pci_free_consistent(adapter->pdev, bufsize, - rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa); + rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa); rx_ring->pFbr1RingVa = NULL; } @@ -478,7 +478,7 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) rx_ring->pFbr0RingVa - rx_ring->Fbr0offset); bufsize = (sizeof(struct fbr_desc) * rx_ring->Fbr0NumEntries) - + 0xfff; + + 0xfff; pci_free_consistent(adapter->pdev, bufsize, @@ -504,7 +504,7 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) pci_free_consistent(adapter->pdev, sizeof(struct rx_status_block), rx_ring->rx_status_block, rx_ring->rx_status_bus); - rx_ring->rx_status_block = NULL; + rx_ring->rx_status_block = NULL; } /* Free receive buffer pool */ @@ -713,7 +713,7 @@ void SetRxDmaTimer(struct et131x_adapter *etdev) */ void et131x_rx_dma_disable(struct et131x_adapter *etdev) { - u32 csr; + u32 csr; /* Setup the receive dma configuration register */ writel(0x00002001, &etdev->regs->rxdma.csr); csr = readl(&etdev->regs->rxdma.csr); @@ -743,9 +743,9 @@ void et131x_rx_dma_enable(struct et131x_adapter *etdev) else if (etdev->rx_ring.Fbr1BufferSize == 16384) csr |= 0x1800; #ifdef USE_FBR0 - csr |= 0x0400; /* FBR0 enable */ + csr |= 0x0400; /* FBR0 enable */ if (etdev->rx_ring.Fbr0BufferSize == 256) - csr |= 0x0100; + csr |= 0x0100; else if (etdev->rx_ring.Fbr0BufferSize == 512) csr |= 0x0200; else if (etdev->rx_ring.Fbr0BufferSize == 1024) @@ -757,7 +757,7 @@ void et131x_rx_dma_enable(struct et131x_adapter *etdev) if ((csr & 0x00020000) != 0) { udelay(5); csr = readl(&etdev->regs->rxdma.csr); - if ((csr & 0x00020000) != 0) { + if ((csr & 0x00020000) != 0) { dev_err(&etdev->pdev->dev, "RX Dma failed to exit halt state. CSR 0x%08x\n", csr); @@ -841,8 +841,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev) (rindex == 1 && bindex > rx_local->Fbr1NumEntries - 1)) #else - if (rindex != 1 || - bindex > rx_local->Fbr1NumEntries - 1) + if (rindex != 1 || bindex > rx_local->Fbr1NumEntries - 1) #endif { /* Illegal buffer or ring index cannot be used by S/W*/ @@ -1063,20 +1062,20 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) static inline u32 bump_fbr(u32 *fbr, u32 limit) { - u32 v = *fbr; - v++; - /* This works for all cases where limit < 1024. The 1023 case - works because 1023++ is 1024 which means the if condition is not - taken but the carry of the bit into the wrap bit toggles the wrap - value correctly */ - if ((v & ET_DMA10_MASK) > limit) { - v &= ~ET_DMA10_MASK; - v ^= ET_DMA10_WRAP; - } - /* For the 1023 case */ - v &= (ET_DMA10_MASK|ET_DMA10_WRAP); - *fbr = v; - return v; + u32 v = *fbr; + v++; + /* This works for all cases where limit < 1024. The 1023 case + works because 1023++ is 1024 which means the if condition is not + taken but the carry of the bit into the wrap bit toggles the wrap + value correctly */ + if ((v & ET_DMA10_MASK) > limit) { + v &= ~ET_DMA10_MASK; + v ^= ET_DMA10_WRAP; + } + /* For the 1023 case */ + v &= (ET_DMA10_MASK|ET_DMA10_WRAP); + *fbr = v; + return v; } /** @@ -1105,7 +1104,7 @@ void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD rfd) if (ri == 1) { struct fbr_desc *next = (struct fbr_desc *) (rx_local->pFbr1RingVa) + - INDEX10(rx_local->local_Fbr1_full); + INDEX10(rx_local->local_Fbr1_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h index ca84a9146d6..e8c653d37a7 100644 --- a/drivers/staging/et131x/et1310_rx.h +++ b/drivers/staging/et131x/et1310_rx.h @@ -91,8 +91,7 @@ #define ALCATEL_BROADCAST_PKT 0x02000000 /* typedefs for Free Buffer Descriptors */ -struct fbr_desc -{ +struct fbr_desc { u32 addr_lo; u32 addr_hi; u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */ @@ -117,7 +116,7 @@ struct fbr_desc * 9: jp Jumbo Packet * 10: vp VLAN Packet * 11-15: unused - * 16: asw_prev_pkt_dropped e.g. IFG too small on previous + * 16: asw_prev_pkt_dropped e.g. IFG too small on previous * 17: asw_RX_DV_event short receive event detected * 18: asw_false_carrier_event bad carrier since last good packet * 19: asw_code_err one or more nibbles signalled as errors diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 1dd5fa5b888..47baab3e6ea 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -113,7 +113,13 @@ static u32 et131x_speed_set; module_param(et131x_speed_set, uint, 0); MODULE_PARM_DESC(et131x_speed_set, - "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); + "Set Link speed and dublex manually (0-5) [0]\n \ + 1 : 10Mb Half-Duplex\n \ + 2 : 10Mb Full-Duplex\n \ + 3 : 100Mb Half-Duplex\n \ + 4 : 100Mb Full-Duplex\n \ + 5 : 1000Mb Full-Duplex\n \ + 0 : Auto Speed Auto Dublex"); /** * et131x_hwaddr_init - set up the MAC Address on the ET1310 @@ -558,7 +564,7 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, /* Parse configuration parameters into the private adapter struct */ if (et131x_speed_set) dev_info(&etdev->pdev->dev, - "Speed set manually to : %d \n", et131x_speed_set); + "Speed set manually to : %d\n", et131x_speed_set); etdev->SpeedDuplex = et131x_speed_set; etdev->RegistryJumboPacket = 1514; /* 1514-9216 */ @@ -820,7 +826,7 @@ static int __init et131x_init_module(void) if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { printk(KERN_WARNING "et131x: invalid speed setting ignored.\n"); - et131x_speed_set = 0; + et131x_speed_set = 0; } return pci_register_driver(&et131x_driver); } diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index ab047f2ff72..535a9d014e7 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -426,26 +426,22 @@ void et131x_multicast(struct net_device *netdev) * accordingly */ - if (netdev->flags & IFF_PROMISC) { + if (netdev->flags & IFF_PROMISC) adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS; - } else { + else adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS; - } - if (netdev->flags & IFF_ALLMULTI) { + if (netdev->flags & IFF_ALLMULTI) adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; - } - if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST) { + if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST) adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; - } if (netdev_mc_count(netdev) < 1) { adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST; adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST; - } else { + } else adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST; - } /* Set values in the private adapter struct */ i = 0;