From: David Brownell Date: Fri, 23 Sep 2005 05:37:29 +0000 (-0700) Subject: [PATCH] root hub updates (greater half) X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f3f3253d644d36a2ea5464005a9c2cf28804d200;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-) --- diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 1a9ff6184943..ff03184da403 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB suspend/resume (EXPERIMENTAL)" + bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)" depends on USB && PM && EXPERIMENTAL help If you say Y here, you can use driver calls or the sysfs "power/state" file to suspend or resume individual USB - peripherals. There are many related features, such as - remote wakeup and driver-specific suspend processing, that - may not yet work as expected. + peripherals. + + Also, USB "remote wakeup" signaling is supported, whereby some + USB devices (like keyboards and network adapters) can wake up + their parent hub. That wakeup cascades up the USB tree, and + could wake the system from states like suspend-to-RAM. If you are unsure about this, say N here. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3c8d8d1f993c..6a601a4547e7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1612,7 +1612,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, */ static int __usb_suspend_device (struct usb_device *udev, int port1) { - int status; + int status = 0; /* caller owns the udev device lock */ if (port1 < 0) @@ -1638,21 +1638,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) } } - /* "global suspend" of the HC-to-USB interface (root hub), or - * "selective suspend" of just one hub-device link. + /* we only change a device's upstream USB link. + * root hubs have no upstream USB link. */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_suspend) { - status = bus->op->hub_suspend (bus); - if (status == 0) { - dev_dbg(&udev->dev, "usb suspend\n"); - usb_set_device_state(udev, - USB_STATE_SUSPENDED); - } - } else - status = -EOPNOTSUPP; - } else + if (udev->parent) status = hub_port_suspend(hdev_to_hub(udev->parent), port1, udev); @@ -1661,6 +1650,8 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) return status; } +#endif + /** * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use @@ -1683,6 +1674,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) */ int usb_suspend_device(struct usb_device *udev) { +#ifdef CONFIG_USB_SUSPEND int port1, status; port1 = locktree(udev); @@ -1692,8 +1684,14 @@ int usb_suspend_device(struct usb_device *udev) status = __usb_suspend_device(udev, port1); usb_unlock_device(udev); return status; +#else + /* NOTE: udev->state unchanged, it's not lying ... */ + udev->dev.power.power_state = PMSG_SUSPEND; + return 0; +#endif } + /* * If the USB "suspend" state is in use (rather than "global suspend"), * many devices will be individually taken out of suspend state using @@ -1702,13 +1700,13 @@ int usb_suspend_device(struct usb_device *udev) * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. */ -static int finish_port_resume(struct usb_device *udev) +static int finish_device_resume(struct usb_device *udev) { int status; u16 devstatus; /* caller owns the udev device lock */ - dev_dbg(&udev->dev, "usb resume\n"); + dev_dbg(&udev->dev, "finish resume\n"); /* usb ch9 identifies four variants of SUSPENDED, based on what * state the device resumes to. Linux currently won't see the @@ -1718,7 +1716,6 @@ static int finish_port_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); - udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1734,7 +1731,8 @@ static int finish_port_resume(struct usb_device *udev) int (*resume)(struct device *); le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP) + && udev->parent) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_CLEAR_FEATURE, @@ -1764,6 +1762,8 @@ static int finish_port_resume(struct usb_device *udev) return status; } +#ifdef CONFIG_USB_SUSPEND + static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { @@ -1809,7 +1809,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) /* TRSMRCY = 10 msec */ msleep(10); if (udev) - status = finish_port_resume(udev); + status = finish_device_resume(udev); } } if (status < 0) @@ -1818,7 +1818,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) return status; } -static int hub_resume (struct usb_interface *intf); +#endif /** * usb_resume_device - re-activate a suspended usb device @@ -1841,35 +1841,22 @@ int usb_resume_device(struct usb_device *udev) if (port1 < 0) return port1; - /* "global resume" of the HC-to-USB interface (root hub), or - * selective resume of one hub-to-device port - */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_resume) { - status = bus->op->hub_resume (bus); +#ifdef CONFIG_USB_SUSPEND + /* selective resume of one downstream hub-to-device port */ + if (udev->parent) { + if (udev->state == USB_STATE_SUSPENDED) { + // NOTE swsusp may bork us, device state being wrong... + // NOTE this fails if parent is also suspended... + status = hub_port_resume(hdev_to_hub(udev->parent), + port1, udev); } else - status = -EOPNOTSUPP; - if (status == 0) { - dev_dbg(&udev->dev, "usb resume\n"); - /* TRSMRCY = 10 msec */ - msleep(10); - usb_set_device_state (udev, USB_STATE_CONFIGURED); - udev->dev.power.power_state = PMSG_ON; - status = hub_resume (udev - ->actconfig->interface[0]); - } - } else if (udev->state == USB_STATE_SUSPENDED) { - // NOTE this fails if parent is also suspended... - status = hub_port_resume(hdev_to_hub(udev->parent), - port1, udev); - } else { - status = 0; - } - if (status < 0) { + status = 0; + } else +#endif + status = finish_device_resume(udev); + if (status < 0) dev_dbg(&udev->dev, "can't resume, status %d\n", status); - } usb_unlock_device(udev); @@ -1886,6 +1873,8 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; +#ifdef CONFIG_USB_SUSPEND + /* don't repeat RESUME sequence if this device * was already woken up by some other task */ @@ -1894,9 +1883,10 @@ static int remote_wakeup(struct usb_device *udev) dev_dbg(&udev->dev, "RESUME (wakeup)\n"); /* TRSMRCY = 10 msec */ msleep(10); - status = finish_port_resume(udev); + status = finish_device_resume(udev); } up(&udev->serialize); +#endif return status; } @@ -1911,12 +1901,32 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev; udev = hdev->children [port1-1]; - if (udev && udev->state != USB_STATE_SUSPENDED) { + if (udev && (udev->dev.power.power_state.event + == PM_EVENT_ON +#ifdef CONFIG_USB_SUSPEND + || udev->state != USB_STATE_SUSPENDED +#endif + )) { dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); return -EBUSY; } } + /* "global suspend" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_suspend) { + int status = bus->op->hub_suspend (bus); + + if (status != 0) { + dev_dbg(&hdev->dev, "'global' suspend %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + } + /* stop khubd and related activity */ hub_quiesce(hub); return 0; @@ -1926,9 +1936,36 @@ static int hub_resume(struct usb_interface *intf) { struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); - unsigned port1; int status; + /* "global resume" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_resume) { + status = bus->op->hub_resume (bus); + if (status) { + dev_dbg(&intf->dev, "'global' resume %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + if (status == 0) { + /* TRSMRCY = 10 msec */ + msleep(10); + } + } + + hub_activate(hub); + + /* REVISIT: this recursion probably shouldn't exist. Remove + * this code sometime, after retesting with different root and + * external hubs. + */ +#ifdef CONFIG_USB_SUSPEND + { + unsigned port1; + for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; u16 portstat, portchange; @@ -1953,7 +1990,7 @@ static int hub_resume(struct usb_interface *intf) if (portstat & USB_PORT_STAT_SUSPEND) status = hub_port_resume(hub, port1, udev); else { - status = finish_port_resume(udev); + status = finish_device_resume(udev); if (status < 0) { dev_dbg(&intf->dev, "resume port %d --> %d\n", port1, status); @@ -1962,8 +1999,8 @@ static int hub_resume(struct usb_interface *intf) } up(&udev->serialize); } - hub->resume_root_hub = 0; - hub_activate(hub); + } +#endif return 0; } @@ -1987,26 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev) kick_khubd(hub); } -#else /* !CONFIG_USB_SUSPEND */ - -int usb_suspend_device(struct usb_device *udev) -{ - /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */ - return 0; -} - -int usb_resume_device(struct usb_device *udev) -{ - udev->dev.power.power_state.event = PM_EVENT_ON; - return 0; -} - -#define hub_suspend NULL -#define hub_resume NULL -#define remote_wakeup(x) 0 - -#endif /* CONFIG_USB_SUSPEND */ - EXPORT_SYMBOL(usb_suspend_device); EXPORT_SYMBOL(usb_resume_device);