From: Ander Conselvan de Oliveira Date: Thu, 6 Oct 2016 16:22:18 +0000 (+0300) Subject: drm/i915: Move DPIO phy documentation section to intel_dpio_phy.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f38861b814b530fbf5add9fa845da99444ebbde0;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Move DPIO phy documentation section to intel_dpio_phy.c Move the DPIO phy documentation section to intel_dpio_phy.c, since that is a more suitable place now that there is a source file dedicated for those phys. Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/55a2d38c15c06a8c5bce498b28decc03948f0224.1475770848.git-series.ander.conselvan.de.oliveira@intel.com --- diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 95ce77ff4342..ba83b7d88f1f 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -189,7 +189,7 @@ Display Refresh Rate Switching (DRRS) DPIO ---- -.. kernel-doc:: drivers/gpu/drm/i915/i915_reg.h +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpio_phy.c :doc: DPIO CSR firmware support for DMC diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 542e570b3578..2f504f6a1c51 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -830,96 +830,7 @@ enum skl_disp_power_wells { #define CCK_FREQUENCY_STATUS_SHIFT 8 #define CCK_FREQUENCY_VALUES (0x1f << 0) -/** - * DOC: DPIO - * - * VLV, CHV and BXT have slightly peculiar display PHYs for driving DP/HDMI - * ports. DPIO is the name given to such a display PHY. These PHYs - * don't follow the standard programming model using direct MMIO - * registers, and instead their registers must be accessed trough IOSF - * sideband. VLV has one such PHY for driving ports B and C, and CHV - * adds another PHY for driving port D. Each PHY responds to specific - * IOSF-SB port. - * - * Each display PHY is made up of one or two channels. Each channel - * houses a common lane part which contains the PLL and other common - * logic. CH0 common lane also contains the IOSF-SB logic for the - * Common Register Interface (CRI) ie. the DPIO registers. CRI clock - * must be running when any DPIO registers are accessed. - * - * In addition to having their own registers, the PHYs are also - * controlled through some dedicated signals from the display - * controller. These include PLL reference clock enable, PLL enable, - * and CRI clock selection, for example. - * - * Eeach channel also has two splines (also called data lanes), and - * each spline is made up of one Physical Access Coding Sub-Layer - * (PCS) block and two TX lanes. So each channel has two PCS blocks - * and four TX lanes. The TX lanes are used as DP lanes or TMDS - * data/clock pairs depending on the output type. - * - * Additionally the PHY also contains an AUX lane with AUX blocks - * for each channel. This is used for DP AUX communication, but - * this fact isn't really relevant for the driver since AUX is - * controlled from the display controller side. No DPIO registers - * need to be accessed during AUX communication, - * - * Generally on VLV/CHV the common lane corresponds to the pipe and - * the spline (PCS/TX) corresponds to the port. - * - * For dual channel PHY (VLV/CHV): - * - * pipe A == CMN/PLL/REF CH0 - * - * pipe B == CMN/PLL/REF CH1 - * - * port B == PCS/TX CH0 - * - * port C == PCS/TX CH1 - * - * This is especially important when we cross the streams - * ie. drive port B with pipe B, or port C with pipe A. - * - * For single channel PHY (CHV): - * - * pipe C == CMN/PLL/REF CH0 - * - * port D == PCS/TX CH0 - * - * On BXT the entire PHY channel corresponds to the port. That means - * the PLL is also now associated with the port rather than the pipe, - * and so the clock needs to be routed to the appropriate transcoder. - * Port A PLL is directly connected to transcoder EDP and port B/C - * PLLs can be routed to any transcoder A/B/C. - * - * Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is - * digital port D (CHV) or port A (BXT). :: - * - * - * Dual channel PHY (VLV/CHV/BXT) - * --------------------------------- - * | CH0 | CH1 | - * | CMN/PLL/REF | CMN/PLL/REF | - * |---------------|---------------| Display PHY - * | PCS01 | PCS23 | PCS01 | PCS23 | - * |-------|-------|-------|-------| - * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| - * --------------------------------- - * | DDI0 | DDI1 | DP/HDMI ports - * --------------------------------- - * - * Single channel PHY (CHV/BXT) - * ----------------- - * | CH0 | - * | CMN/PLL/REF | - * |---------------| Display PHY - * | PCS01 | PCS23 | - * |-------|-------| - * |TX0|TX1|TX2|TX3| - * ----------------- - * | DDI2 | DP/HDMI port - * ----------------- - */ +/* DPIO registers */ #define DPIO_DEVFN 0 #define DPIO_CTL _MMIO(VLV_DISPLAY_BASE + 0x2110) diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c index edf0cfd860c4..680629697ea6 100644 --- a/drivers/gpu/drm/i915/intel_dpio_phy.c +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c @@ -23,6 +23,97 @@ #include "intel_drv.h" +/** + * DOC: DPIO + * + * VLV, CHV and BXT have slightly peculiar display PHYs for driving DP/HDMI + * ports. DPIO is the name given to such a display PHY. These PHYs + * don't follow the standard programming model using direct MMIO + * registers, and instead their registers must be accessed trough IOSF + * sideband. VLV has one such PHY for driving ports B and C, and CHV + * adds another PHY for driving port D. Each PHY responds to specific + * IOSF-SB port. + * + * Each display PHY is made up of one or two channels. Each channel + * houses a common lane part which contains the PLL and other common + * logic. CH0 common lane also contains the IOSF-SB logic for the + * Common Register Interface (CRI) ie. the DPIO registers. CRI clock + * must be running when any DPIO registers are accessed. + * + * In addition to having their own registers, the PHYs are also + * controlled through some dedicated signals from the display + * controller. These include PLL reference clock enable, PLL enable, + * and CRI clock selection, for example. + * + * Eeach channel also has two splines (also called data lanes), and + * each spline is made up of one Physical Access Coding Sub-Layer + * (PCS) block and two TX lanes. So each channel has two PCS blocks + * and four TX lanes. The TX lanes are used as DP lanes or TMDS + * data/clock pairs depending on the output type. + * + * Additionally the PHY also contains an AUX lane with AUX blocks + * for each channel. This is used for DP AUX communication, but + * this fact isn't really relevant for the driver since AUX is + * controlled from the display controller side. No DPIO registers + * need to be accessed during AUX communication, + * + * Generally on VLV/CHV the common lane corresponds to the pipe and + * the spline (PCS/TX) corresponds to the port. + * + * For dual channel PHY (VLV/CHV): + * + * pipe A == CMN/PLL/REF CH0 + * + * pipe B == CMN/PLL/REF CH1 + * + * port B == PCS/TX CH0 + * + * port C == PCS/TX CH1 + * + * This is especially important when we cross the streams + * ie. drive port B with pipe B, or port C with pipe A. + * + * For single channel PHY (CHV): + * + * pipe C == CMN/PLL/REF CH0 + * + * port D == PCS/TX CH0 + * + * On BXT the entire PHY channel corresponds to the port. That means + * the PLL is also now associated with the port rather than the pipe, + * and so the clock needs to be routed to the appropriate transcoder. + * Port A PLL is directly connected to transcoder EDP and port B/C + * PLLs can be routed to any transcoder A/B/C. + * + * Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is + * digital port D (CHV) or port A (BXT). :: + * + * + * Dual channel PHY (VLV/CHV/BXT) + * --------------------------------- + * | CH0 | CH1 | + * | CMN/PLL/REF | CMN/PLL/REF | + * |---------------|---------------| Display PHY + * | PCS01 | PCS23 | PCS01 | PCS23 | + * |-------|-------|-------|-------| + * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| + * --------------------------------- + * | DDI0 | DDI1 | DP/HDMI ports + * --------------------------------- + * + * Single channel PHY (CHV/BXT) + * ----------------- + * | CH0 | + * | CMN/PLL/REF | + * |---------------| Display PHY + * | PCS01 | PCS23 | + * |-------|-------| + * |TX0|TX1|TX2|TX3| + * ----------------- + * | DDI2 | DP/HDMI port + * ----------------- + */ + bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, enum dpio_phy phy) {