From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sat, 21 May 2011 03:43:09 +0000 (-0700)
Subject: via-*: Move the VIA drivers
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f2148a472883ddf77626fff52b070655a8a0a788;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git
via-*: Move the VIA drivers
Move the VIA drivers into drivers/net/ethernet/via/ and make the
necessary Kconfig and Makefile changes.
CC: Roger Luethi <rl@hellgate.ch>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
diff --git a/MAINTAINERS b/MAINTAINERS
index b9acfdee10e8..51d9281a3035 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6988,7 +6988,7 @@ F: include/linux/vhost.h
VIA RHINE NETWORK DRIVER
M: Roger Luethi <rl@hellgate.ch>
S: Maintained
-F: drivers/net/via-rhine.c
+F: drivers/net/ethernet/via/via-rhine.c
VIAPRO SMBUS DRIVER
M: Jean Delvare <khali@linux-fr.org>
@@ -7016,7 +7016,7 @@ VIA VELOCITY NETWORK DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/via-velocity.*
+F: drivers/net/ethernet/via/via-velocity.*
VLAN (802.1Q)
M: Patrick McHardy <kaber@trash.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb6c6947b320..c1e491add8f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -614,30 +614,6 @@ config KS8851_MLL
This platform driver is for Micrel KS8851 Address/data bus
multiplexed network chip.
-config VIA_RHINE
- tristate "VIA Rhine support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
- Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
- Ethernet functions can also be found integrated on South Bridges
- (e.g. VT8235).
-
- To compile this driver as a module, choose M here. The module
- will be called via-rhine.
-
-config VIA_RHINE_MMIO
- bool "Use MMIO instead of PIO"
- depends on VIA_RHINE
- help
- This instructs the driver to use PCI shared memory (MMIO) instead of
- programmed I/O ports (PIO). Enabling this gives an improvement in
- processing time in parts of the driver.
-
- If unsure, say Y.
-
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -793,18 +769,6 @@ config SIS190
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
-config VIA_VELOCITY
- tristate "VIA Velocity support"
- depends on PCI
- select CRC32
- select CRC_CCITT
- select MII
- help
- If you have a VIA "Velocity" based network card say Y here.
-
- To compile this driver as a module, choose M here. The module
- will be called via-velocity.
-
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 69ca6a009c59..7e1128fd62bd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -51,8 +51,6 @@ obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1c447d96d7e5..bdc0df873daf 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -45,5 +45,6 @@ source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 48c8656b96c2..ac60ac9026bb 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_VIA) += via/
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
new file mode 100644
index 000000000000..7199194fa898
--- /dev/null
+++ b/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,56 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+ bool "VIA devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about VIA devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+ tristate "VIA Rhine support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+ Ethernet functions can also be found integrated on South Bridges
+ (e.g. VT8235).
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-rhine.
+
+config VIA_RHINE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on VIA_RHINE
+ ---help---
+ This instructs the driver to use PCI shared memory (MMIO) instead of
+ programmed I/O ports (PIO). Enabling this gives an improvement in
+ processing time in parts of the driver.
+
+ If unsure, say Y.
+
+config VIA_VELOCITY
+ tristate "VIA Velocity support"
+ depends on PCI
+ select CRC32
+ select CRC_CCITT
+ select MII
+ ---help---
+ If you have a VIA "Velocity" based network card say Y here.
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-velocity.
+
+endif # NET_VENDOR_VIA
diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile
new file mode 100644
index 000000000000..46c5d4a3d8f1
--- /dev/null
+++ b/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
new file mode 100644
index 000000000000..7f23ab913fd9
--- /dev/null
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -0,0 +1,2340 @@
+/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
+/*
+ Written 1998-2001 by Donald Becker.
+
+ Current Maintainer: Roger Luethi <rl@hellgate.ch>
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is designed for the VIA VT86C100A Rhine-I.
+ It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
+ and management NIC 6105M).
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+
+ This driver contains some changes from the original Donald Becker
+ version. He may or may not be interested in bug reports on this
+ code. You can find his versions at:
+ http://www.scyld.com/network/via-rhine.html
+ [link no longer provides useful info -jgarzik]
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "via-rhine"
+#define DRV_VERSION "1.5.0"
+#define DRV_RELDATE "2010-10-09"
+
+
+/* A few user-configurable values.
+ These may be modified when a driver module is loaded. */
+
+#define DEBUG
+static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+static int max_interrupt_work = 20;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1518 effectively disables this feature. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+ defined(CONFIG_SPARC) || defined(__ia64__) || \
+ defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak;
+#endif
+
+/* Work-around for broken BIOSes: they are unable to get the chip back out of
+ power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
+static int avoid_D3;
+
+/*
+ * In case you are looking for 'options[]' or 'full_duplex[]', they
+ * are gone. Use ethtool(8) instead.
+ */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+ The Rhine has a 64 element 8390-like hash table. */
+static const int multicast_filter_limit = 32;
+
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE 16
+#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
+#define RX_RING_SIZE 64
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <linux/dmi.h>
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] __devinitconst =
+ "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
+
+/* This driver was written to use PCI memory space. Some early versions
+ of the Rhine may only work correctly with I/O space accesses. */
+#ifdef CONFIG_VIA_RHINE_MMIO
+#define USE_MMIO
+#else
+#endif
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(max_interrupt_work, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(avoid_D3, bool, 0);
+MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
+MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
+
+#define MCAM_SIZE 32
+#define VCAM_SIZE 32
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
+controller.
+
+II. Board-specific settings
+
+Boards with this chip are functional only in a bus-master PCI slot.
+
+Many operational settings are loaded from the EEPROM to the Config word at
+offset 0x78. For most of these settings, this driver assumes that they are
+correct.
+If this driver is compiled to use PCI memory space operations the EEPROM
+must be configured to enable memory ops.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver attempts to use a zero-copy receive and transmit scheme.
+
+Alas, all data buffers are required to start on a 32 bit boundary, so
+the driver must often copy transmit packets into bounce buffers.
+
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack. Buffers consumed this way are replaced by newly allocated
+skbuffs in the last phase of rhine_rx().
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets. When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine. Copying also preloads the cache, which is
+most useful with small frames.
+
+Since the VIA chips are only able to transfer data to buffers on 32 bit
+boundaries, the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing. Copying these unaligned buffers
+has the beneficial effect of 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
+which is single threaded by the hardware and interrupt handling software.
+
+The send packet thread has partial control over the Tx ring. It locks the
+netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
+the ring is not available it stops the transmit queue by
+calling netif_stop_queue.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. If at least half of the entries in
+the Rx ring are available the transmit queue is woken up if it was stopped.
+
+IV. Notes
+
+IVb. References
+
+Preliminary VT86C100A manual from http://www.via.com.tw/
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
+
+
+IVc. Errata
+
+The VT86C100A manual is not reliable information.
+The 3043 chip does not handle unaligned transmit or receive buffers, resulting
+in significant performance degradation for bounce buffer copies on transmit
+and unaligned IP headers on receive.
+The chip does not pad to minimum transmit length.
+
+*/
+
+
+/* This table drives the PCI probe routines. It's mostly boilerplate in all
+ of the drivers, and will likely be provided by some future kernel.
+ Note the matching code -- the first table entry matchs all 56** cards but
+ second only the 1234 card.
+*/
+
+enum rhine_revs {
+ VT86C100A = 0x00,
+ VTunknown0 = 0x20,
+ VT6102 = 0x40,
+ VT8231 = 0x50, /* Integrated MAC */
+ VT8233 = 0x60, /* Integrated MAC */
+ VT8235 = 0x74, /* Integrated MAC */
+ VT8237 = 0x78, /* Integrated MAC */
+ VTunknown1 = 0x7C,
+ VT6105 = 0x80,
+ VT6105_B0 = 0x83,
+ VT6105L = 0x8A,
+ VT6107 = 0x8C,
+ VTunknown2 = 0x8E,
+ VT6105M = 0x90, /* Management adapter */
+};
+
+enum rhine_quirks {
+ rqWOL = 0x0001, /* Wake-On-LAN support */
+ rqForceReset = 0x0002,
+ rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
+ rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
+ rqRhineI = 0x0100, /* See comment below */
+};
+/*
+ * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
+ * MMIO as well as for the collision counter and the Tx FIFO underflow
+ * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
+ */
+
+/* Beware of PCI posted writes */
+#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
+
+static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = {
+ { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
+ { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
+ { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
+ { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
+
+
+/* Offsets to the device registers. */
+enum register_offsets {
+ StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
+ ChipCmd1=0x09, TQWake=0x0A,
+ IntrStatus=0x0C, IntrEnable=0x0E,
+ MulticastFilter0=0x10, MulticastFilter1=0x14,
+ RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
+ MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F,
+ MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
+ ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
+ RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
+ StickyHW=0x83, IntrStatus2=0x84,
+ CamMask=0x88, CamCon=0x92, CamAddr=0x93,
+ WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
+ WOLcrClr1=0xA6, WOLcgClr=0xA7,
+ PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
+};
+
+/* Bits in ConfigD */
+enum backoff_bits {
+ BackOptional=0x01, BackModify=0x02,
+ BackCaptureEffect=0x04, BackRandom=0x08
+};
+
+/* Bits in the TxConfig (TCR) register */
+enum tcr_bits {
+ TCR_PQEN=0x01,
+ TCR_LB0=0x02, /* loopback[0] */
+ TCR_LB1=0x04, /* loopback[1] */
+ TCR_OFSET=0x08,
+ TCR_RTGOPT=0x10,
+ TCR_RTFT0=0x20,
+ TCR_RTFT1=0x40,
+ TCR_RTSF=0x80,
+};
+
+/* Bits in the CamCon (CAMC) register */
+enum camcon_bits {
+ CAMC_CAMEN=0x01,
+ CAMC_VCAMSL=0x02,
+ CAMC_CAMWR=0x04,
+ CAMC_CAMRD=0x08,
+};
+
+/* Bits in the PCIBusConfig1 (BCR1) register */
+enum bcr1_bits {
+ BCR1_POT0=0x01,
+ BCR1_POT1=0x02,
+ BCR1_POT2=0x04,
+ BCR1_CTFT0=0x08,
+ BCR1_CTFT1=0x10,
+ BCR1_CTSF=0x20,
+ BCR1_TXQNOBK=0x40, /* for VT6105 */
+ BCR1_VIDFR=0x80, /* for VT6105 */
+ BCR1_MED0=0x40, /* for VT6102 */
+ BCR1_MED1=0x80, /* for VT6102 */
+};
+
+#ifdef USE_MMIO
+/* Registers we check that mmio and reg are the same. */
+static const int mmio_verify_registers[] = {
+ RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
+ 0
+};
+#endif
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+ IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
+ IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
+ IntrPCIErr=0x0040,
+ IntrStatsMax=0x0080, IntrRxEarly=0x0100,
+ IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
+ IntrTxAborted=0x2000, IntrLinkChange=0x4000,
+ IntrRxWakeUp=0x8000,
+ IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
+ IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
+ IntrTxErrSummary=0x082218,
+};
+
+/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
+enum wol_bits {
+ WOLucast = 0x10,
+ WOLmagic = 0x20,
+ WOLbmcast = 0x30,
+ WOLlnkon = 0x40,
+ WOLlnkoff = 0x80,
+};
+
+/* The Rx and Tx buffer descriptors. */
+struct rx_desc {
+ __le32 rx_status;
+ __le32 desc_length; /* Chain flag, Buffer/frame length */
+ __le32 addr;
+ __le32 next_desc;
+};
+struct tx_desc {
+ __le32 tx_status;
+ __le32 desc_length; /* Chain flag, Tx Config, Frame length */
+ __le32 addr;
+ __le32 next_desc;
+};
+
+/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
+#define TXDESC 0x00e08000
+
+enum rx_status_bits {
+ RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
+};
+
+/* Bits in *_desc.*_status */
+enum desc_status_bits {
+ DescOwn=0x80000000
+};
+
+/* Bits in *_desc.*_length */
+enum desc_length_bits {
+ DescTag=0x00010000
+};
+
+/* Bits in ChipCmd. */
+enum chip_cmd_bits {
+ CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
+ CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
+ Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
+ Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
+};
+
+struct rhine_private {
+ /* Bit mask for configured VLAN ids */
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+ /* Descriptor rings */
+ struct rx_desc *rx_ring;
+ struct tx_desc *tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+
+ /* The addresses of receive-in-place skbuffs. */
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
+
+ /* The saved address of a sent-in-place packet/buffer, for later free(). */
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
+
+ /* Tx bounce buffers (Rhine-I only) */
+ unsigned char *tx_buf[TX_RING_SIZE];
+ unsigned char *tx_bufs;
+ dma_addr_t tx_bufs_dma;
+
+ struct pci_dev *pdev;
+ long pioaddr;
+ struct net_device *dev;
+ struct napi_struct napi;
+ spinlock_t lock;
+ struct work_struct reset_task;
+
+ /* Frequently used values: keep some adjacent for cache effect. */
+ u32 quirks;
+ struct rx_desc *rx_head_desc;
+ unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
+ unsigned int cur_tx, dirty_tx;
+ unsigned int rx_buf_sz; /* Based on MTU+slack. */
+ u8 wolopts;
+
+ u8 tx_thresh, rx_thresh;
+
+ struct mii_if_info mii_if;
+ void __iomem *base;
+};
+
+#define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
+#define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
+#define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
+#define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
+#define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
+#define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
+#define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
+
+
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int rhine_open(struct net_device *dev);
+static void rhine_reset_task(struct work_struct *work);
+static void rhine_tx_timeout(struct net_device *dev);
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
+static void rhine_tx(struct net_device *dev);
+static int rhine_rx(struct net_device *dev, int limit);
+static void rhine_error(struct net_device *dev, int intr_status);
+static void rhine_set_rx_mode(struct net_device *dev);
+static struct net_device_stats *rhine_get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static int rhine_close(struct net_device *dev);
+static void rhine_shutdown (struct pci_dev *pdev);
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid);
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid);
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_init_cam_filter(struct net_device *dev);
+static void rhine_update_vcam(struct net_device *dev);
+
+#define RHINE_WAIT_FOR(condition) \
+do { \
+ int i = 1024; \
+ while (!(condition) && --i) \
+ ; \
+ if (debug > 1 && i < 512) \
+ pr_info("%4d cycles used @ %s:%d\n", \
+ 1024 - i, __func__, __LINE__); \
+} while (0)
+
+static inline u32 get_intr_status(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 intr_status;
+
+ intr_status = ioread16(ioaddr + IntrStatus);
+ /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
+ if (rp->quirks & rqStatusWBRace)
+ intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
+ return intr_status;
+}
+
+/*
+ * Get power related registers into sane state.
+ * Notify user about past WOL event.
+ */
+static void rhine_power_init(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u16 wolstat;
+
+ if (rp->quirks & rqWOL) {
+ /* Make sure chip is in power state D0 */
+ iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
+
+ /* Disable "force PME-enable" */
+ iowrite8(0x80, ioaddr + WOLcgClr);
+
+ /* Clear power-event config bits (WOL) */
+ iowrite8(0xFF, ioaddr + WOLcrClr);
+ /* More recent cards can manage two additional patterns */
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x03, ioaddr + WOLcrClr1);
+
+ /* Save power-event status bits */
+ wolstat = ioread8(ioaddr + PwrcsrSet);
+ if (rp->quirks & rq6patterns)
+ wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
+
+ /* Clear power-event status bits */
+ iowrite8(0xFF, ioaddr + PwrcsrClr);
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x03, ioaddr + PwrcsrClr1);
+
+ if (wolstat) {
+ char *reason;
+ switch (wolstat) {
+ case WOLmagic:
+ reason = "Magic packet";
+ break;
+ case WOLlnkon:
+ reason = "Link went up";
+ break;
+ case WOLlnkoff:
+ reason = "Link went down";
+ break;
+ case WOLucast:
+ reason = "Unicast packet";
+ break;
+ case WOLbmcast:
+ reason = "Multicast/broadcast packet";
+ break;
+ default:
+ reason = "Unknown";
+ }
+ netdev_info(dev, "Woke system up. Reason: %s\n",
+ reason);
+ }
+ }
+}
+
+static void rhine_chip_reset(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
+ IOSYNC;
+
+ if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
+ netdev_info(dev, "Reset not complete yet. Trying harder.\n");
+
+ /* Force reset */
+ if (rp->quirks & rqForceReset)
+ iowrite8(0x40, ioaddr + MiscCmd);
+
+ /* Reset can take somewhat longer (rare) */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
+ }
+
+ if (debug > 1)
+ netdev_info(dev, "Reset %s\n",
+ (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
+ "failed" : "succeeded");
+}
+
+#ifdef USE_MMIO
+static void enable_mmio(long pioaddr, u32 quirks)
+{
+ int n;
+ if (quirks & rqRhineI) {
+ /* More recent docs say that this bit is reserved ... */
+ n = inb(pioaddr + ConfigA) | 0x20;
+ outb(n, pioaddr + ConfigA);
+ } else {
+ n = inb(pioaddr + ConfigD) | 0x80;
+ outb(n, pioaddr + ConfigD);
+ }
+}
+#endif
+
+/*
+ * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
+ * (plus 0x6C for Rhine-I/II)
+ */
+static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ outb(0x20, pioaddr + MACRegEEcsr);
+ RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
+
+#ifdef USE_MMIO
+ /*
+ * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
+ * MMIO. If reloading EEPROM was done first this could be avoided, but
+ * it is not known if that still works with the "win98-reboot" problem.
+ */
+ enable_mmio(pioaddr, rp->quirks);
+#endif
+
+ /* Turn off EEPROM-controlled wake-up (magic packet) */
+ if (rp->quirks & rqWOL)
+ iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
+
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rhine_poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rhine_interrupt(dev->irq, (void *)dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rhine_napipoll(struct napi_struct *napi, int budget)
+{
+ struct rhine_private *rp = container_of(napi, struct rhine_private, napi);
+ struct net_device *dev = rp->dev;
+ void __iomem *ioaddr = rp->base;
+ int work_done;
+
+ work_done = rhine_rx(dev, budget);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+ }
+ return work_done;
+}
+
+static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ /* Reset the chip to erase previous misconfiguration. */
+ rhine_chip_reset(dev);
+
+ /* Rhine-I needs extra time to recuperate before EEPROM reload */
+ if (rp->quirks & rqRhineI)
+ msleep(5);
+
+ /* Reload EEPROM controlled bytes cleared by soft reset */
+ rhine_reload_eeprom(pioaddr, dev);
+}
+
+static const struct net_device_ops rhine_netdev_ops = {
+ .ndo_open = rhine_open,
+ .ndo_stop = rhine_close,
+ .ndo_start_xmit = rhine_start_tx,
+ .ndo_get_stats = rhine_get_stats,
+ .ndo_set_multicast_list = rhine_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rhine_tx_timeout,
+ .ndo_vlan_rx_add_vid = rhine_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = rhine_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rhine_poll,
+#endif
+};
+
+static int __devinit rhine_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct rhine_private *rp;
+ int i, rc;
+ u32 quirks;
+ long pioaddr;
+ long memaddr;
+ void __iomem *ioaddr;
+ int io_size, phy_id;
+ const char *name;
+#ifdef USE_MMIO
+ int bar = 1;
+#else
+ int bar = 0;
+#endif
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ pr_info_once("%s\n", version);
+#endif
+
+ io_size = 256;
+ phy_id = 0;
+ quirks = 0;
+ name = "Rhine";
+ if (pdev->revision < VTunknown0) {
+ quirks = rqRhineI;
+ io_size = 128;
+ }
+ else if (pdev->revision >= VT6102) {
+ quirks = rqWOL | rqForceReset;
+ if (pdev->revision < VT6105) {
+ name = "Rhine II";
+ quirks |= rqStatusWBRace; /* Rhine-II exclusive */
+ }
+ else {
+ phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
+ if (pdev->revision >= VT6105_B0)
+ quirks |= rq6patterns;
+ if (pdev->revision < VT6105M)
+ name = "Rhine III";
+ else
+ name = "Rhine III (Management Adapter)";
+ }
+ }
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out;
+
+ /* this should always be supported */
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev,
+ "32-bit PCI DMA addresses not supported by the card!?\n");
+ goto err_out;
+ }
+
+ /* sanity check */
+ if ((pci_resource_len(pdev, 0) < io_size) ||
+ (pci_resource_len(pdev, 1) < io_size)) {
+ rc = -EIO;
+ dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
+ goto err_out;
+ }
+
+ pioaddr = pci_resource_start(pdev, 0);
+ memaddr = pci_resource_start(pdev, 1);
+
+ pci_set_master(pdev);
+
+ dev = alloc_etherdev(sizeof(struct rhine_private));
+ if (!dev) {
+ rc = -ENOMEM;
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
+ goto err_out;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ rp = netdev_priv(dev);
+ rp->dev = dev;
+ rp->quirks = quirks;
+ rp->pioaddr = pioaddr;
+ rp->pdev = pdev;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_free_netdev;
+
+ ioaddr = pci_iomap(pdev, bar, io_size);
+ if (!ioaddr) {
+ rc = -EIO;
+ dev_err(&pdev->dev,
+ "ioremap failed for device %s, region 0x%X @ 0x%lX\n",
+ pci_name(pdev), io_size, memaddr);
+ goto err_out_free_res;
+ }
+
+#ifdef USE_MMIO
+ enable_mmio(pioaddr, quirks);
+
+ /* Check that selected MMIO registers match the PIO ones */
+ i = 0;
+ while (mmio_verify_registers[i]) {
+ int reg = mmio_verify_registers[i++];
+ unsigned char a = inb(pioaddr+reg);
+ unsigned char b = readb(ioaddr+reg);
+ if (a != b) {
+ rc = -EIO;
+ dev_err(&pdev->dev,
+ "MMIO do not match PIO [%02x] (%02x != %02x)\n",
+ reg, a, b);
+ goto err_out_unmap;
+ }
+ }
+#endif /* USE_MMIO */
+
+ dev->base_addr = (unsigned long)ioaddr;
+ rp->base = ioaddr;
+
+ /* Get chip registers into a sane state */
+ rhine_power_init(dev);
+ rhine_hw_init(dev, pioaddr);
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ /* Report it and use a random ethernet address instead */
+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
+ random_ether_addr(dev->dev_addr);
+ netdev_info(dev, "Using random MAC address: %pM\n",
+ dev->dev_addr);
+ }
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* For Rhine-I/II, phy_id is loaded from EEPROM */
+ if (!phy_id)
+ phy_id = ioread8(ioaddr + 0x6C);
+
+ dev->irq = pdev->irq;
+
+ spin_lock_init(&rp->lock);
+ INIT_WORK(&rp->reset_task, rhine_reset_task);
+
+ rp->mii_if.dev = dev;
+ rp->mii_if.mdio_read = mdio_read;
+ rp->mii_if.mdio_write = mdio_write;
+ rp->mii_if.phy_id_mask = 0x1f;
+ rp->mii_if.reg_num_mask = 0x1f;
+
+ /* The chip-specific entries in the device structure. */
+ dev->netdev_ops = &rhine_netdev_ops;
+ dev->ethtool_ops = &netdev_ethtool_ops,
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
+
+ if (rp->quirks & rqRhineI)
+ dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
+
+ if (pdev->revision >= VT6105M)
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ /* dev->name not defined before register_netdev()! */
+ rc = register_netdev(dev);
+ if (rc)
+ goto err_out_unmap;
+
+ netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
+ name,
+#ifdef USE_MMIO
+ memaddr,
+#else
+ (long)ioaddr,
+#endif
+ dev->dev_addr, pdev->irq);
+
+ pci_set_drvdata(pdev, dev);
+
+ {
+ u16 mii_cmd;
+ int mii_status = mdio_read(dev, phy_id, 1);
+ mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
+ mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
+ netdev_info(dev,
+ "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
+ phy_id,
+ mii_status, rp->mii_if.advertising,
+ mdio_read(dev, phy_id, 5));
+
+ /* set IFF_RUNNING */
+ if (mii_status & BMSR_LSTATUS)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+
+ }
+ }
+ rp->mii_if.phy_id = phy_id;
+ if (debug > 1 && avoid_D3)
+ netdev_info(dev, "No D3 power state at shutdown\n");
+
+ return 0;
+
+err_out_unmap:
+ pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_free_netdev:
+ free_netdev(dev);
+err_out:
+ return rc;
+}
+
+static int alloc_ring(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void *ring;
+ dma_addr_t ring_dma;
+
+ ring = pci_alloc_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ &ring_dma);
+ if (!ring) {
+ netdev_err(dev, "Could not allocate DMA memory\n");
+ return -ENOMEM;
+ }
+ if (rp->quirks & rqRhineI) {
+ rp->tx_bufs = pci_alloc_consistent(rp->pdev,
+ PKT_BUF_SZ * TX_RING_SIZE,
+ &rp->tx_bufs_dma);
+ if (rp->tx_bufs == NULL) {
+ pci_free_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ ring, ring_dma);
+ return -ENOMEM;
+ }
+ }
+
+ rp->rx_ring = ring;
+ rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
+ rp->rx_ring_dma = ring_dma;
+ rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
+
+ return 0;
+}
+
+static void free_ring(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ pci_free_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ rp->rx_ring, rp->rx_ring_dma);
+ rp->tx_ring = NULL;
+
+ if (rp->tx_bufs)
+ pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
+ rp->tx_bufs, rp->tx_bufs_dma);
+
+ rp->tx_bufs = NULL;
+
+}
+
+static void alloc_rbufs(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ dma_addr_t next;
+ int i;
+
+ rp->dirty_rx = rp->cur_rx = 0;
+
+ rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+ rp->rx_head_desc = &rp->rx_ring[0];
+ next = rp->rx_ring_dma;
+
+ /* Init the ring entries */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rp->rx_ring[i].rx_status = 0;
+ rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
+ next += sizeof(struct rx_desc);
+ rp->rx_ring[i].next_desc = cpu_to_le32(next);
+ rp->rx_skbuff[i] = NULL;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
+
+ /* Fill in the Rx buffers. Handle allocation failure gracefully. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+ rp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+
+ rp->rx_skbuff_dma[i] =
+ pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
+ rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
+ }
+ rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+}
+
+static void free_rbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int i;
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rp->rx_ring[i].rx_status = 0;
+ rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+ if (rp->rx_skbuff[i]) {
+ pci_unmap_single(rp->pdev,
+ rp->rx_skbuff_dma[i],
+ rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rp->rx_skbuff[i]);
+ }
+ rp->rx_skbuff[i] = NULL;
+ }
+}
+
+static void alloc_tbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ dma_addr_t next;
+ int i;
+
+ rp->dirty_tx = rp->cur_tx = 0;
+ next = rp->tx_ring_dma;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ rp->tx_skbuff[i] = NULL;
+ rp->tx_ring[i].tx_status = 0;
+ rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+ next += sizeof(struct tx_desc);
+ rp->tx_ring[i].next_desc = cpu_to_le32(next);
+ if (rp->quirks & rqRhineI)
+ rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
+ }
+ rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
+
+}
+
+static void free_tbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ rp->tx_ring[i].tx_status = 0;
+ rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+ rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+ if (rp->tx_skbuff[i]) {
+ if (rp->tx_skbuff_dma[i]) {
+ pci_unmap_single(rp->pdev,
+ rp->tx_skbuff_dma[i],
+ rp->tx_skbuff[i]->len,
+ PCI_DMA_TODEVICE);
+ }
+ dev_kfree_skb(rp->tx_skbuff[i]);
+ }
+ rp->tx_skbuff[i] = NULL;
+ rp->tx_buf[i] = NULL;
+ }
+}
+
+static void rhine_check_media(struct net_device *dev, unsigned int init_media)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ mii_check_media(&rp->mii_if, debug, init_media);
+
+ if (rp->mii_if.full_duplex)
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
+ ioaddr + ChipCmd1);
+ else
+ iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
+ ioaddr + ChipCmd1);
+ if (debug > 1)
+ netdev_info(dev, "force_media %d, carrier %d\n",
+ rp->mii_if.force_media, netif_carrier_ok(dev));
+}
+
+/* Called after status of force_media possibly changed */
+static void rhine_set_carrier(struct mii_if_info *mii)
+{
+ if (mii->force_media) {
+ /* autoneg is off: Link is always assumed to be up */
+ if (!netif_carrier_ok(mii->dev))
+ netif_carrier_on(mii->dev);
+ }
+ else /* Let MMI library update carrier status */
+ rhine_check_media(mii->dev, 0);
+ if (debug > 1)
+ netdev_info(mii->dev, "force_media %d, carrier %d\n",
+ mii->force_media, netif_carrier_ok(mii->dev));
+}
+
+/**
+ * rhine_set_cam - set CAM multicast filters
+ * @ioaddr: register block of this Rhine
+ * @idx: multicast CAM index [0..MCAM_SIZE-1]
+ * @addr: multicast address (6 bytes)
+ *
+ * Load addresses into multicast filters.
+ */
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+ int i;
+
+ iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+ wmb();
+
+ /* Paranoid -- idx out of range should never happen */
+ idx &= (MCAM_SIZE - 1);
+
+ iowrite8((u8) idx, ioaddr + CamAddr);
+
+ for (i = 0; i < 6; i++, addr++)
+ iowrite8(*addr, ioaddr + MulticastFilter0 + i);
+ udelay(10);
+ wmb();
+
+ iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+ udelay(10);
+
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam - set CAM VLAN filters
+ * @ioaddr: register block of this Rhine
+ * @idx: VLAN CAM index [0..VCAM_SIZE-1]
+ * @addr: VLAN ID (2 bytes)
+ *
+ * Load addresses into VLAN filters.
+ */
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+ iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+ wmb();
+
+ /* Paranoid -- idx out of range should never happen */
+ idx &= (VCAM_SIZE - 1);
+
+ iowrite8((u8) idx, ioaddr + CamAddr);
+
+ iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6);
+ udelay(10);
+ wmb();
+
+ iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+ udelay(10);
+
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_cam_mask - set multicast CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: multicast CAM mask
+ *
+ * Mask sets multicast filters active/inactive.
+ */
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+ iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+ wmb();
+
+ /* write mask */
+ iowrite32(mask, ioaddr + CamMask);
+
+ /* disable CAMEN */
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam_mask - set VLAN CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: VLAN CAM mask
+ *
+ * Mask sets VLAN filters active/inactive.
+ */
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+ iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+ wmb();
+
+ /* write mask */
+ iowrite32(mask, ioaddr + CamMask);
+
+ /* disable CAMEN */
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_init_cam_filter - initialize CAM filters
+ * @dev: network device
+ *
+ * Initialize (disable) hardware VLAN and multicast support on this
+ * Rhine.
+ */
+static void rhine_init_cam_filter(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ /* Disable all CAMs */
+ rhine_set_vlan_cam_mask(ioaddr, 0);
+ rhine_set_cam_mask(ioaddr, 0);
+
+ /* disable hardware VLAN support */
+ BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig);
+ BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+}
+
+/**
+ * rhine_update_vcam - update VLAN CAM filters
+ * @rp: rhine_private data of this Rhine
+ *
+ * Update VLAN CAM filters to match configuration change.
+ */
+static void rhine_update_vcam(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u16 vid;
+ u32 vCAMmask = 0; /* 32 vCAMs (6105M and better) */
+ unsigned int i = 0;
+
+ for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) {
+ rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid);
+ vCAMmask |= 1 << i;
+ if (++i >= VCAM_SIZE)
+ break;
+ }
+ rhine_set_vlan_cam_mask(ioaddr, vCAMmask);
+}
+
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ spin_lock_irq(&rp->lock);
+ set_bit(vid, rp->active_vlans);
+ rhine_update_vcam(dev);
+ spin_unlock_irq(&rp->lock);
+}
+
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ spin_lock_irq(&rp->lock);
+ clear_bit(vid, rp->active_vlans);
+ rhine_update_vcam(dev);
+ spin_unlock_irq(&rp->lock);
+}
+
+static void init_registers(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int i;
+
+ for (i = 0; i < 6; i++)
+ iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+ /* Initialize other registers. */
+ iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
+ /* Configure initial FIFO thresholds. */
+ iowrite8(0x20, ioaddr + TxConfig);
+ rp->tx_thresh = 0x20;
+ rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
+
+ iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
+ iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
+
+ rhine_set_rx_mode(dev);
+
+ if (rp->pdev->revision >= VT6105M)
+ rhine_init_cam_filter(dev);
+
+ napi_enable(&rp->napi);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+
+ iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
+ ioaddr + ChipCmd);
+ rhine_check_media(dev, 1);
+}
+
+/* Enable MII link status auto-polling (required for IntrLinkChange) */
+static void rhine_enable_linkmon(void __iomem *ioaddr)
+{
+ iowrite8(0, ioaddr + MIICmd);
+ iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
+ iowrite8(0x80, ioaddr + MIICmd);
+
+ RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
+
+ iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
+}
+
+/* Disable MII link status auto-polling (required for MDIO access) */
+static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
+{
+ iowrite8(0, ioaddr + MIICmd);
+
+ if (quirks & rqRhineI) {
+ iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
+
+ /* Can be called from ISR. Evil. */
+ mdelay(1);
+
+ /* 0x80 must be set immediately before turning it off */
+ iowrite8(0x80, ioaddr + MIICmd);
+
+ RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
+
+ /* Heh. Now clear 0x80 again. */
+ iowrite8(0, ioaddr + MIICmd);
+ }
+ else
+ RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
+}
+
+/* Read and write over the MII Management Data I/O (MDIO) interface. */
+
+static int mdio_read(struct net_device *dev, int phy_id, int regnum)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int result;
+
+ rhine_disable_linkmon(ioaddr, rp->quirks);
+
+ /* rhine_disable_linkmon already cleared MIICmd */
+ iowrite8(phy_id, ioaddr + MIIPhyAddr);
+ iowrite8(regnum, ioaddr + MIIRegAddr);
+ iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
+ result = ioread16(ioaddr + MIIData);
+
+ rhine_enable_linkmon(ioaddr);
+ return result;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ rhine_disable_linkmon(ioaddr, rp->quirks);
+
+ /* rhine_disable_linkmon already cleared MIICmd */
+ iowrite8(phy_id, ioaddr + MIIPhyAddr);
+ iowrite8(regnum, ioaddr + MIIRegAddr);
+ iowrite16(value, ioaddr + MIIData);
+ iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
+
+ rhine_enable_linkmon(ioaddr);
+}
+
+static int rhine_open(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int rc;
+
+ rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name,
+ dev);
+ if (rc)
+ return rc;
+
+ if (debug > 1)
+ netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq);
+
+ rc = alloc_ring(dev);
+ if (rc) {
+ free_irq(rp->pdev->irq, dev);
+ return rc;
+ }
+ alloc_rbufs(dev);
+ alloc_tbufs(dev);
+ rhine_chip_reset(dev);
+ init_registers(dev);
+ if (debug > 2)
+ netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n",
+ __func__, ioread16(ioaddr + ChipCmd),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static void rhine_reset_task(struct work_struct *work)
+{
+ struct rhine_private *rp = container_of(work, struct rhine_private,
+ reset_task);
+ struct net_device *dev = rp->dev;
+
+ /* protect against concurrent rx interrupts */
+ disable_irq(rp->pdev->irq);
+
+ napi_disable(&rp->napi);
+
+ spin_lock_bh(&rp->lock);
+
+ /* clear all descriptors */
+ free_tbufs(dev);
+ free_rbufs(dev);
+ alloc_tbufs(dev);
+ alloc_rbufs(dev);
+
+ /* Reinitialize the hardware. */
+ rhine_chip_reset(dev);
+ init_registers(dev);
+
+ spin_unlock_bh(&rp->lock);
+ enable_irq(rp->pdev->irq);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ dev->stats.tx_errors++;
+ netif_wake_queue(dev);
+}
+
+static void rhine_tx_timeout(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
+ ioread16(ioaddr + IntrStatus),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ schedule_work(&rp->reset_task);
+}
+
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ unsigned entry;
+ unsigned long flags;
+
+ /* Caution: the write order is important here, set the field
+ with the "ownership" bits last. */
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = rp->cur_tx % TX_RING_SIZE;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+
+ rp->tx_skbuff[entry] = skb;
+
+ if ((rp->quirks & rqRhineI) &&
+ (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
+ /* Must use alignment buffer. */
+ if (skb->len > PKT_BUF_SZ) {
+ /* packet too long, drop it */
+ dev_kfree_skb(skb);
+ rp->tx_skbuff[entry] = NULL;
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ /* Padding is not copied and so must be redone. */
+ skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+ if (skb->len < ETH_ZLEN)
+ memset(rp->tx_buf[entry] + skb->len, 0,
+ ETH_ZLEN - skb->len);
+ rp->tx_skbuff_dma[entry] = 0;
+ rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
+ (rp->tx_buf[entry] -
+ rp->tx_bufs));
+ } else {
+ rp->tx_skbuff_dma[entry] =
+ pci_map_single(rp->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
+ }
+
+ rp->tx_ring[entry].desc_length =
+ cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+
+ if (unlikely(vlan_tx_tag_present(skb))) {
+ rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16);
+ /* request tagging */
+ rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000);
+ }
+ else
+ rp->tx_ring[entry].tx_status = 0;
+
+ /* lock eth irq */
+ spin_lock_irqsave(&rp->lock, flags);
+ wmb();
+ rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
+ wmb();
+
+ rp->cur_tx++;
+
+ /* Non-x86 Todo: explicitly flush cache lines here. */
+
+ if (vlan_tx_tag_present(skb))
+ /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+ BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+ /* Wake the potentially-idle transmit channel */
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+ ioaddr + ChipCmd1);
+ IOSYNC;
+
+ if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
+ netif_stop_queue(dev);
+
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ if (debug > 4) {
+ netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+ rp->cur_tx-1, entry);
+ }
+ return NETDEV_TX_OK;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 intr_status;
+ int boguscnt = max_interrupt_work;
+ int handled = 0;
+
+ while ((intr_status = get_intr_status(dev))) {
+ handled = 1;
+
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ if (intr_status & IntrTxDescRace)
+ iowrite8(0x08, ioaddr + IntrStatus2);
+ iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
+ IOSYNC;
+
+ if (debug > 4)
+ netdev_dbg(dev, "Interrupt, status %08x\n",
+ intr_status);
+
+ if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
+ IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
+ iowrite16(IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+
+ napi_schedule(&rp->napi);
+ }
+
+ if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
+ if (intr_status & IntrTxErrSummary) {
+ /* Avoid scavenging before Tx engine turned off */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
+ if (debug > 2 &&
+ ioread8(ioaddr+ChipCmd) & CmdTxOn)
+ netdev_warn(dev,
+ "%s: Tx engine still on\n",
+ __func__);
+ }
+ rhine_tx(dev);
+ }
+
+ /* Abnormal error summary/uncommon events handlers. */
+ if (intr_status & (IntrPCIErr | IntrLinkChange |
+ IntrStatsMax | IntrTxError | IntrTxAborted |
+ IntrTxUnderrun | IntrTxDescRace))
+ rhine_error(dev, intr_status);
+
+ if (--boguscnt < 0) {
+ netdev_warn(dev, "Too much work at interrupt, status=%#08x\n",
+ intr_status);
+ break;
+ }
+ }
+
+ if (debug > 3)
+ netdev_dbg(dev, "exiting interrupt, status=%08x\n",
+ ioread16(ioaddr + IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but isolated
+ for clarity. */
+static void rhine_tx(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
+
+ spin_lock(&rp->lock);
+
+ /* find and cleanup dirty tx descriptors */
+ while (rp->dirty_tx != rp->cur_tx) {
+ txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
+ if (debug > 6)
+ netdev_dbg(dev, "Tx scavenge %d status %08x\n",
+ entry, txstatus);
+ if (txstatus & DescOwn)
+ break;
+ if (txstatus & 0x8000) {
+ if (debug > 1)
+ netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+ txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & 0x0400)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & 0x0200)
+ dev->stats.tx_window_errors++;
+ if (txstatus & 0x0100)
+ dev->stats.tx_aborted_errors++;
+ if (txstatus & 0x0080)
+ dev->stats.tx_heartbeat_errors++;
+ if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
+ (txstatus & 0x0800) || (txstatus & 0x1000)) {
+ dev->stats.tx_fifo_errors++;
+ rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+ break; /* Keep the skb - we try again */
+ }
+ /* Transmitter restarted in 'abnormal' handler. */
+ } else {
+ if (rp->quirks & rqRhineI)
+ dev->stats.collisions += (txstatus >> 3) & 0x0F;
+ else
+ dev->stats.collisions += txstatus & 0x0F;
+ if (debug > 6)
+ netdev_dbg(dev, "collisions: %1.1x:%1.1x\n",
+ (txstatus >> 3) & 0xF,
+ txstatus & 0xF);
+ dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
+ dev->stats.tx_packets++;
+ }
+ /* Free the original skb. */
+ if (rp->tx_skbuff_dma[entry]) {
+ pci_unmap_single(rp->pdev,
+ rp->tx_skbuff_dma[entry],
+ rp->tx_skbuff[entry]->len,
+ PCI_DMA_TODEVICE);
+ }
+ dev_kfree_skb_irq(rp->tx_skbuff[entry]);
+ rp->tx_skbuff[entry] = NULL;
+ entry = (++rp->dirty_tx) % TX_RING_SIZE;
+ }
+ if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
+ netif_wake_queue(dev);
+
+ spin_unlock(&rp->lock);
+}
+
+/**
+ * rhine_get_vlan_tci - extract TCI from Rx data buffer
+ * @skb: pointer to sk_buff
+ * @data_size: used data area of the buffer including CRC
+ *
+ * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
+ * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
+ * aligned following the CRC.
+ */
+static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
+{
+ u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
+ return be16_to_cpup((__be16 *)trailer);
+}
+
+/* Process up to limit frames from receive ring */
+static int rhine_rx(struct net_device *dev, int limit)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int count;
+ int entry = rp->cur_rx % RX_RING_SIZE;
+
+ if (debug > 4) {
+ netdev_dbg(dev, "%s(), entry %d status %08x\n",
+ __func__, entry,
+ le32_to_cpu(rp->rx_head_desc->rx_status));
+ }
+
+ /* If EOP is set on the next entry, it's a new packet. Send it up. */
+ for (count = 0; count < limit; ++count) {
+ struct rx_desc *desc = rp->rx_head_desc;
+ u32 desc_status = le32_to_cpu(desc->rx_status);
+ u32 desc_length = le32_to_cpu(desc->desc_length);
+ int data_size = desc_status >> 16;
+
+ if (desc_status & DescOwn)
+ break;
+
+ if (debug > 4)
+ netdev_dbg(dev, "%s() status is %08x\n",
+ __func__, desc_status);
+
+ if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
+ if ((desc_status & RxWholePkt) != RxWholePkt) {
+ netdev_warn(dev,
+ "Oversized Ethernet frame spanned multiple buffers, "
+ "entry %#x length %d status %08x!\n",
+ entry, data_size,
+ desc_status);
+ netdev_warn(dev,
+ "Oversized Ethernet frame %p vs %p\n",
+ rp->rx_head_desc,
+ &rp->rx_ring[entry]);
+ dev->stats.rx_length_errors++;
+ } else if (desc_status & RxErr) {
+ /* There was a error. */
+ if (debug > 2)
+ netdev_dbg(dev, "%s() Rx error was %08x\n",
+ __func__, desc_status);
+ dev->stats.rx_errors++;
+ if (desc_status & 0x0030)
+ dev->stats.rx_length_errors++;
+ if (desc_status & 0x0048)
+ dev->stats.rx_fifo_errors++;
+ if (desc_status & 0x0004)
+ dev->stats.rx_frame_errors++;
+ if (desc_status & 0x0002) {
+ /* this can also be updated outside the interrupt handler */
+ spin_lock(&rp->lock);
+ dev->stats.rx_crc_errors++;
+ spin_unlock(&rp->lock);
+ }
+ }
+ } else {
+ struct sk_buff *skb = NULL;
+ /* Length should omit the CRC */
+ int pkt_len = data_size - 4;
+ u16 vlan_tci = 0;
+
+ /* Check if the packet is long enough to accept without
+ copying to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak)
+ skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+ if (skb) {
+ pci_dma_sync_single_for_cpu(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ skb_copy_to_linear_data(skb,
+ rp->rx_skbuff[entry]->data,
+ pkt_len);
+ skb_put(skb, pkt_len);
+ pci_dma_sync_single_for_device(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ } else {
+ skb = rp->rx_skbuff[entry];
+ if (skb == NULL) {
+ netdev_err(dev, "Inconsistent Rx descriptor chain\n");
+ break;
+ }
+ rp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ pci_unmap_single(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (unlikely(desc_length & DescTag))
+ vlan_tci = rhine_get_vlan_tci(skb, data_size);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (unlikely(desc_length & DescTag))
+ __vlan_hwaccel_put_tag(skb, vlan_tci);
+ netif_receive_skb(skb);
+ dev->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ }
+ entry = (++rp->cur_rx) % RX_RING_SIZE;
+ rp->rx_head_desc = &rp->rx_ring[entry];
+ }
+
+ /* Refill the Rx ring buffers. */
+ for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
+ struct sk_buff *skb;
+ entry = rp->dirty_rx % RX_RING_SIZE;
+ if (rp->rx_skbuff[entry] == NULL) {
+ skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+ rp->rx_skbuff[entry] = skb;
+ if (skb == NULL)
+ break; /* Better luck next round. */
+ skb->dev = dev; /* Mark as being used by this device. */
+ rp->rx_skbuff_dma[entry] =
+ pci_map_single(rp->pdev, skb->data,
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
+ }
+ rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
+ }
+
+ return count;
+}
+
+/*
+ * Clears the "tally counters" for CRC errors and missed frames(?).
+ * It has been reported that some chips need a write of 0 to clear
+ * these, for others the counters are set to 1 when written to and
+ * instead cleared when read. So we clear them both ways ...
+ */
+static inline void clear_tally_counters(void __iomem *ioaddr)
+{
+ iowrite32(0, ioaddr + RxMissed);
+ ioread16(ioaddr + RxCRCErrs);
+ ioread16(ioaddr + RxMissed);
+}
+
+static void rhine_restart_tx(struct net_device *dev) {
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int entry = rp->dirty_tx % TX_RING_SIZE;
+ u32 intr_status;
+
+ /*
+ * If new errors occurred, we need to sort them out before doing Tx.
+ * In that case the ISR will be back here RSN anyway.
+ */
+ intr_status = get_intr_status(dev);
+
+ if ((intr_status & IntrTxErrSummary) == 0) {
+
+ /* We know better than the chip where it should continue. */
+ iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
+ ioaddr + TxRingPtr);
+
+ iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
+ ioaddr + ChipCmd);
+
+ if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000))
+ /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+ BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+ ioaddr + ChipCmd1);
+ IOSYNC;
+ }
+ else {
+ /* This should never happen */
+ if (debug > 1)
+ netdev_warn(dev, "%s() Another error occurred %08x\n",
+ __func__, intr_status);
+ }
+
+}
+
+static void rhine_error(struct net_device *dev, int intr_status)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ spin_lock(&rp->lock);
+
+ if (intr_status & IntrLinkChange)
+ rhine_check_media(dev, 0);
+ if (intr_status & IntrStatsMax) {
+ dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+ dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+ clear_tally_counters(ioaddr);
+ }
+ if (intr_status & IntrTxAborted) {
+ if (debug > 1)
+ netdev_info(dev, "Abort %08x, frame dropped\n",
+ intr_status);
+ }
+ if (intr_status & IntrTxUnderrun) {
+ if (rp->tx_thresh < 0xE0)
+ BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
+ if (debug > 1)
+ netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n",
+ rp->tx_thresh);
+ }
+ if (intr_status & IntrTxDescRace) {
+ if (debug > 2)
+ netdev_info(dev, "Tx descriptor write-back race\n");
+ }
+ if ((intr_status & IntrTxError) &&
+ (intr_status & (IntrTxAborted |
+ IntrTxUnderrun | IntrTxDescRace)) == 0) {
+ if (rp->tx_thresh < 0xE0) {
+ BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
+ }
+ if (debug > 1)
+ netdev_info(dev, "Unspecified error. Tx threshold now %02x\n",
+ rp->tx_thresh);
+ }
+ if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
+ IntrTxError))
+ rhine_restart_tx(dev);
+
+ if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
+ IntrTxError | IntrTxAborted | IntrNormalSummary |
+ IntrTxDescRace)) {
+ if (debug > 1)
+ netdev_err(dev, "Something Wicked happened! %08x\n",
+ intr_status);
+ }
+
+ spin_unlock(&rp->lock);
+}
+
+static struct net_device_stats *rhine_get_stats(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rp->lock, flags);
+ dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+ dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+ clear_tally_counters(ioaddr);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ return &dev->stats;
+}
+
+static void rhine_set_rx_mode(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ u8 rx_mode = 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */
+ struct netdev_hw_addr *ha;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ rx_mode = 0x1C;
+ iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+ iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to match, or accept all multicasts. */
+ iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+ iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+ } else if (rp->pdev->revision >= VT6105M) {
+ int i = 0;
+ u32 mCAMmask = 0; /* 32 mCAMs (6105M and better) */
+ netdev_for_each_mc_addr(ha, dev) {
+ if (i == MCAM_SIZE)
+ break;
+ rhine_set_cam(ioaddr, i, ha->addr);
+ mCAMmask |= 1 << i;
+ i++;
+ }
+ rhine_set_cam_mask(ioaddr, mCAMmask);
+ } else {
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+ iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+ }
+ /* enable/disable VLAN receive filtering */
+ if (rp->pdev->revision >= VT6105M) {
+ if (dev->flags & IFF_PROMISC)
+ BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+ else
+ BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+ }
+ BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(rp->pdev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&rp->lock);
+ rc = mii_ethtool_gset(&rp->mii_if, cmd);
+ spin_unlock_irq(&rp->lock);
+
+ return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&rp->lock);
+ rc = mii_ethtool_sset(&rp->mii_if, cmd);
+ spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
+
+ return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ return mii_nway_restart(&rp->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ return mii_link_ok(&rp->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+ debug = value;
+}
+
+static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ if (!(rp->quirks & rqWOL))
+ return;
+
+ spin_lock_irq(&rp->lock);
+ wol->supported = WAKE_PHY | WAKE_MAGIC |
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
+ wol->wolopts = rp->wolopts;
+ spin_unlock_irq(&rp->lock);
+}
+
+static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ u32 support = WAKE_PHY | WAKE_MAGIC |
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
+
+ if (!(rp->quirks & rqWOL))
+ return -EINVAL;
+
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&rp->lock);
+ rp->wolopts = wol->wolopts;
+ spin_unlock_irq(&rp->lock);
+
+ return 0;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .set_settings = netdev_set_settings,
+ .nway_reset = netdev_nway_reset,
+ .get_link = netdev_get_link,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+ .get_wol = rhine_get_wol,
+ .set_wol = rhine_set_wol,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&rp->lock);
+ rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
+
+ return rc;
+}
+
+static int rhine_close(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ napi_disable(&rp->napi);
+ cancel_work_sync(&rp->reset_task);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&rp->lock);
+
+ if (debug > 1)
+ netdev_dbg(dev, "Shutting down ethercard, status was %04x\n",
+ ioread16(ioaddr + ChipCmd));
+
+ /* Switch to loopback mode to avoid hardware races. */
+ iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite16(0x0000, ioaddr + IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ iowrite16(CmdStop, ioaddr + ChipCmd);
+
+ spin_unlock_irq(&rp->lock);
+
+ free_irq(rp->pdev->irq, dev);
+ free_rbufs(dev);
+ free_tbufs(dev);
+ free_ring(dev);
+
+ return 0;
+}
+
+
+static void __devexit rhine_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ pci_iounmap(pdev, rp->base);
+ pci_release_regions(pdev);
+
+ free_netdev(dev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void rhine_shutdown (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ if (!(rp->quirks & rqWOL))
+ return; /* Nothing to do for non-WOL adapters */
+
+ rhine_power_init(dev);
+
+ /* Make sure we use pattern 0, 1 and not 4, 5 */
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x04, ioaddr + WOLcgClr);
+
+ if (rp->wolopts & WAKE_MAGIC) {
+ iowrite8(WOLmagic, ioaddr + WOLcrSet);
+ /*
+ * Turn EEPROM-controlled wake-up back on -- some hardware may
+ * not cooperate otherwise.
+ */
+ iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
+ }
+
+ if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
+ iowrite8(WOLbmcast, ioaddr + WOLcgSet);
+
+ if (rp->wolopts & WAKE_PHY)
+ iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
+
+ if (rp->wolopts & WAKE_UCAST)
+ iowrite8(WOLucast, ioaddr + WOLcrSet);
+
+ if (rp->wolopts) {
+ /* Enable legacy WOL (for old motherboards) */
+ iowrite8(0x01, ioaddr + PwcfgSet);
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+ }
+
+ /* Hit power state D3 (sleep) */
+ if (!avoid_D3)
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
+
+ /* TODO: Check use of pci_enable_wake() */
+
+}
+
+#ifdef CONFIG_PM
+static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (!netif_running(dev))
+ return 0;
+
+ napi_disable(&rp->napi);
+
+ netif_device_detach(dev);
+ pci_save_state(pdev);
+
+ spin_lock_irqsave(&rp->lock, flags);
+ rhine_shutdown(pdev);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ free_irq(dev->irq, dev);
+ return 0;
+}
+
+static int rhine_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ if (!netif_running(dev))
+ return 0;
+
+ if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
+ netdev_err(dev, "request_irq failed\n");
+
+ ret = pci_set_power_state(pdev, PCI_D0);
+ if (debug > 1)
+ netdev_info(dev, "Entering power state D0 %s (%d)\n",
+ ret ? "failed" : "succeeded", ret);
+
+ pci_restore_state(pdev);
+
+ spin_lock_irqsave(&rp->lock, flags);
+#ifdef USE_MMIO
+ enable_mmio(rp->pioaddr, rp->quirks);
+#endif
+ rhine_power_init(dev);
+ free_tbufs(dev);
+ free_rbufs(dev);
+ alloc_tbufs(dev);
+ alloc_rbufs(dev);
+ init_registers(dev);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ netif_device_attach(dev);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver rhine_driver = {
+ .name = DRV_NAME,
+ .id_table = rhine_pci_tbl,
+ .probe = rhine_init_one,
+ .remove = __devexit_p(rhine_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rhine_suspend,
+ .resume = rhine_resume,
+#endif /* CONFIG_PM */
+ .shutdown = rhine_shutdown,
+};
+
+static struct dmi_system_id __initdata rhine_dmi_table[] = {
+ {
+ .ident = "EPIA-M",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+ },
+ },
+ {
+ .ident = "KV7",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+ },
+ },
+ { NULL }
+};
+
+static int __init rhine_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ pr_info("%s\n", version);
+#endif
+ if (dmi_check_system(rhine_dmi_table)) {
+ /* these BIOSes fail at PXE boot if chip is in D3 */
+ avoid_D3 = 1;
+ pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
+ }
+ else if (avoid_D3)
+ pr_info("avoid_D3 set\n");
+
+ return pci_register_driver(&rhine_driver);
+}
+
+
+static void __exit rhine_cleanup(void)
+{
+ pci_unregister_driver(&rhine_driver);
+}
+
+
+module_init(rhine_init);
+module_exit(rhine_cleanup);
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
new file mode 100644
index 000000000000..490ec5b2775a
--- /dev/null
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -0,0 +1,3592 @@
+/*
+ * This code is derived from the VIA reference driver (copyright message
+ * below) provided to Red Hat by VIA Networking Technologies, Inc. for
+ * addition to the Linux kernel.
+ *
+ * The code has been merged into one source file, cleaned up to follow
+ * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned
+ * for 64bit hardware platforms.
+ *
+ * TODO
+ * rx_copybreak/alignment
+ * More testing
+ *
+ * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk>
+ * Additional fixes and clean up: Francois Romieu
+ *
+ * This source has not been verified for use in safety critical systems.
+ *
+ * Please direct queries about the revamped driver to the linux-kernel
+ * list not VIA.
+ *
+ * Original code:
+ *
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This software may be redistributed and/or modified under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * Author: Chuang Liang-Shing, AJ Jiang
+ *
+ * Date: Jan 24, 2003
+ *
+ * MODULE_LICENSE("GPL");
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/io.h>
+#include <linux/if.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/inetdevice.h>
+#include <linux/reboot.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/crc-ccitt.h>
+#include <linux/crc32.h>
+
+#include "via-velocity.h"
+
+
+static int velocity_nics;
+static int msglevel = MSG_LEVEL_INFO;
+
+/**
+ * mac_get_cam_mask - Read a CAM mask
+ * @regs: register block for this velocity
+ * @mask: buffer to store mask
+ *
+ * Fetch the mask bits of the selected CAM and store them into the
+ * provided mask buffer.
+ */
+static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+
+ writeb(0, ®s->CAMADDR);
+
+ /* read mask */
+ for (i = 0; i < 8; i++)
+ *mask++ = readb(&(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, ®s->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+}
+
+/**
+ * mac_set_cam_mask - Set a CAM mask
+ * @regs: register block for this velocity
+ * @mask: CAM mask to load
+ *
+ * Store a new mask into a CAM
+ */
+static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+
+ writeb(CAMADDR_CAMEN, ®s->CAMADDR);
+
+ for (i = 0; i < 8; i++)
+ writeb(*mask++, &(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, ®s->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+}
+
+static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR);
+
+ for (i = 0; i < 8; i++)
+ writeb(*mask++, &(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, ®s->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+}
+
+/**
+ * mac_set_cam - set CAM data
+ * @regs: register block of this velocity
+ * @idx: Cam index
+ * @addr: 2 or 6 bytes of CAM data
+ *
+ * Load an address or vlan tag into a CAM
+ */
+static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR);
+
+ for (i = 0; i < 6; i++)
+ writeb(*addr++, &(regs->MARCAM[i]));
+
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
+
+ udelay(10);
+
+ writeb(0, ®s->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+}
+
+static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
+ const u8 *addr)
+{
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR);
+ writew(*((u16 *) addr), ®s->MARCAM[0]);
+
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
+
+ udelay(10);
+
+ writeb(0, ®s->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
+}
+
+
+/**
+ * mac_wol_reset - reset WOL after exiting low power
+ * @regs: register block of this velocity
+ *
+ * Called after we drop out of wake on lan mode in order to
+ * reset the Wake on lan features. This function doesn't restore
+ * the rest of the logic from the result of sleep/wakeup
+ */
+static void mac_wol_reset(struct mac_regs __iomem *regs)
+{
+
+ /* Turn off SWPTAG right after leaving power mode */
+ BYTE_REG_BITS_OFF(STICKHW_SWPTAG, ®s->STICKHW);
+ /* clear sticky bits */
+ BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
+
+ BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, ®s->CHIPGCR);
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
+ /* disable force PME-enable */
+ writeb(WOLCFG_PMEOVR, ®s->WOLCFGClr);
+ /* disable power-event config bit */
+ writew(0xFFFF, ®s->WOLCRClr);
+ /* clear power status */
+ writew(0xFFFF, ®s->WOLSRClr);
+}
+
+static const struct ethtool_ops velocity_ethtool_ops;
+
+/*
+ Define module options
+*/
+
+MODULE_AUTHOR("VIA Networking Technologies, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
+
+#define VELOCITY_PARAM(N, D) \
+ static int N[MAX_UNITS] = OPTION_DEFAULT;\
+ module_param_array(N, int, NULL, 0); \
+ MODULE_PARM_DESC(N, D);
+
+#define RX_DESC_MIN 64
+#define RX_DESC_MAX 255
+#define RX_DESC_DEF 64
+VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors");
+
+#define TX_DESC_MIN 16
+#define TX_DESC_MAX 256
+#define TX_DESC_DEF 64
+VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+#define RX_THRESH_MIN 0
+#define RX_THRESH_MAX 3
+#define RX_THRESH_DEF 0
+/* rx_thresh[] is used for controlling the receive fifo threshold.
+ 0: indicate the rxfifo threshold is 128 bytes.
+ 1: indicate the rxfifo threshold is 512 bytes.
+ 2: indicate the rxfifo threshold is 1024 bytes.
+ 3: indicate the rxfifo threshold is store & forward.
+*/
+VELOCITY_PARAM(rx_thresh, "Receive fifo threshold");
+
+#define DMA_LENGTH_MIN 0
+#define DMA_LENGTH_MAX 7
+#define DMA_LENGTH_DEF 6
+
+/* DMA_length[] is used for controlling the DMA length
+ 0: 8 DWORDs
+ 1: 16 DWORDs
+ 2: 32 DWORDs
+ 3: 64 DWORDs
+ 4: 128 DWORDs
+ 5: 256 DWORDs
+ 6: SF(flush till emply)
+ 7: SF(flush till emply)
+*/
+VELOCITY_PARAM(DMA_length, "DMA length");
+
+#define IP_ALIG_DEF 0
+/* IP_byte_align[] is used for IP header DWORD byte aligned
+ 0: indicate the IP header won't be DWORD byte aligned.(Default) .
+ 1: indicate the IP header will be DWORD byte aligned.
+ In some environment, the IP header should be DWORD byte aligned,
+ or the packet will be droped when we receive it. (eg: IPVS)
+*/
+VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
+
+#define FLOW_CNTL_DEF 1
+#define FLOW_CNTL_MIN 1
+#define FLOW_CNTL_MAX 5
+
+/* flow_control[] is used for setting the flow control ability of NIC.
+ 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
+ 2: enable TX flow control.
+ 3: enable RX flow control.
+ 4: enable RX/TX flow control.
+ 5: disable
+*/
+VELOCITY_PARAM(flow_control, "Enable flow control ability");
+
+#define MED_LNK_DEF 0
+#define MED_LNK_MIN 0
+#define MED_LNK_MAX 5
+/* speed_duplex[] is used for setting the speed and duplex mode of NIC.
+ 0: indicate autonegotiation for both speed and duplex mode
+ 1: indicate 100Mbps half duplex mode
+ 2: indicate 100Mbps full duplex mode
+ 3: indicate 10Mbps half duplex mode
+ 4: indicate 10Mbps full duplex mode
+ 5: indicate 1000Mbps full duplex mode
+
+ Note:
+ if EEPROM have been set to the force mode, this option is ignored
+ by driver.
+*/
+VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
+
+#define VAL_PKT_LEN_DEF 0
+/* ValPktLen[] is used for setting the checksum offload ability of NIC.
+ 0: Receive frame with invalid layer 2 length (Default)
+ 1: Drop frame with invalid layer 2 length
+*/
+VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
+
+#define WOL_OPT_DEF 0
+#define WOL_OPT_MIN 0
+#define WOL_OPT_MAX 7
+/* wol_opts[] is used for controlling wake on lan behavior.
+ 0: Wake up if recevied a magic packet. (Default)
+ 1: Wake up if link status is on/off.
+ 2: Wake up if recevied an arp packet.
+ 4: Wake up if recevied any unicast packet.
+ Those value can be sumed up to support more than one option.
+*/
+VELOCITY_PARAM(wol_opts, "Wake On Lan options");
+
+static int rx_copybreak = 200;
+module_param(rx_copybreak, int, 0644);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+
+/*
+ * Internal board variants. At the moment we have only one
+ */
+static struct velocity_info_tbl chip_info_table[] = {
+ {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
+ { }
+};
+
+/*
+ * Describe the PCI device identifiers that we support in this
+ * device driver. Used for hotplug autoloading.
+ */
+static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, velocity_id_table);
+
+/**
+ * get_chip_name - identifier to name
+ * @id: chip identifier
+ *
+ * Given a chip identifier return a suitable description. Returns
+ * a pointer a static string valid while the driver is loaded.
+ */
+static const char __devinit *get_chip_name(enum chip_type chip_id)
+{
+ int i;
+ for (i = 0; chip_info_table[i].name != NULL; i++)
+ if (chip_info_table[i].chip_id == chip_id)
+ break;
+ return chip_info_table[i].name;
+}
+
+/**
+ * velocity_remove1 - device unplug
+ * @pdev: PCI device being removed
+ *
+ * Device unload callback. Called on an unplug or on module
+ * unload for each active device that is present. Disconnects
+ * the device from the network layer and frees all the resources
+ */
+static void __devexit velocity_remove1(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ iounmap(vptr->mac_regs);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+
+ velocity_nics--;
+}
+
+/**
+ * velocity_set_int_opt - parser for integer options
+ * @opt: pointer to option value
+ * @val: value the user requested (or -1 for default)
+ * @min: lowest value allowed
+ * @max: highest value allowed
+ * @def: default value
+ * @name: property name
+ * @dev: device name
+ *
+ * Set an integer property in the module options. This function does
+ * all the verification and checking as well as reporting so that
+ * we don't duplicate code for each option.
+ */
+static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
+{
+ if (val == -1)
+ *opt = def;
+ else if (val < min || val > max) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+ devname, name, min, max);
+ *opt = def;
+ } else {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
+ devname, name, val);
+ *opt = val;
+ }
+}
+
+/**
+ * velocity_set_bool_opt - parser for boolean options
+ * @opt: pointer to option value
+ * @val: value the user requested (or -1 for default)
+ * @def: default value (yes/no)
+ * @flag: numeric value to set for true.
+ * @name: property name
+ * @dev: device name
+ *
+ * Set a boolean property in the module options. This function does
+ * all the verification and checking as well as reporting so that
+ * we don't duplicate code for each option.
+ */
+static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname)
+{
+ (*opt) &= (~flag);
+ if (val == -1)
+ *opt |= (def ? flag : 0);
+ else if (val < 0 || val > 1) {
+ printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
+ devname, name);
+ *opt |= (def ? flag : 0);
+ } else {
+ printk(KERN_INFO "%s: set parameter %s to %s\n",
+ devname, name, val ? "TRUE" : "FALSE");
+ *opt |= (val ? flag : 0);
+ }
+}
+
+/**
+ * velocity_get_options - set options on device
+ * @opts: option structure for the device
+ * @index: index of option to use in module options array
+ * @devname: device name
+ *
+ * Turn the module and command options into a single structure
+ * for the current device
+ */
+static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
+{
+
+ velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
+ velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
+ velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
+ velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
+
+ velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
+ velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
+ velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
+ velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
+ velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
+ opts->numrx = (opts->numrx & ~3);
+}
+
+/**
+ * velocity_init_cam_filter - initialise CAM
+ * @vptr: velocity to program
+ *
+ * Initialize the content addressable memory used for filters. Load
+ * appropriately according to the presence of VLAN
+ */
+static void velocity_init_cam_filter(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned int vid, i = 0;
+
+ /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
+ WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
+ WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG);
+
+ /* Disable all CAMs */
+ memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
+ memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+
+ /* Enable VCAMs */
+
+ if (test_bit(0, vptr->active_vlans))
+ WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
+
+ for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
+ mac_set_vlan_cam(regs, i, (u8 *) &vid);
+ vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
+ if (++i >= VCAM_SIZE)
+ break;
+ }
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+}
+
+static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ set_bit(vid, vptr->active_vlans);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+}
+
+static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ clear_bit(vid, vptr->active_vlans);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+}
+
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+ vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
+
+/**
+ * velocity_rx_reset - handle a receive reset
+ * @vptr: velocity we are resetting
+ *
+ * Reset the ownership and status for the receive ring side.
+ * Hand all the receive queue to the NIC.
+ */
+static void velocity_rx_reset(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ /*
+ * Init state, all RD entries belong to the NIC
+ */
+ for (i = 0; i < vptr->options.numrx; ++i)
+ vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
+
+ writew(vptr->options.numrx, ®s->RBRDU);
+ writel(vptr->rx.pool_dma, ®s->RDBaseLo);
+ writew(0, ®s->RDIdx);
+ writew(vptr->options.numrx - 1, ®s->RDCSize);
+}
+
+/**
+ * velocity_get_opt_media_mode - get media selection
+ * @vptr: velocity adapter
+ *
+ * Get the media mode stored in EEPROM or module options and load
+ * mii_status accordingly. The requested link state information
+ * is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+ u32 status = 0;
+
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_AUTO:
+ status = VELOCITY_AUTONEG_ENABLE;
+ break;
+ case SPD_DPX_100_FULL:
+ status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_10_FULL:
+ status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_100_HALF:
+ status = VELOCITY_SPEED_100;
+ break;
+ case SPD_DPX_10_HALF:
+ status = VELOCITY_SPEED_10;
+ break;
+ case SPD_DPX_1000_FULL:
+ status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ break;
+ }
+ vptr->mii_status = status;
+ return status;
+}
+
+/**
+ * safe_disable_mii_autopoll - autopoll off
+ * @regs: velocity registers
+ *
+ * Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ u16 ww;
+
+ /* turn off MAUTO */
+ writeb(0, ®s->MIICR);
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+}
+
+/**
+ * enable_mii_autopoll - turn on autopolling
+ * @regs: velocity registers
+ *
+ * Enable the MII link status autopoll feature on the Velocity
+ * hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ int ii;
+
+ writeb(0, &(regs->MIICR));
+ writeb(MIIADR_SWMPL, ®s->MIIADR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+
+ writeb(MIICR_MAUTO, ®s->MIICR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+
+}
+
+/**
+ * velocity_mii_read - read MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: buffer for received data
+ *
+ * Perform a single read of an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ writeb(index, ®s->MIIADR);
+
+ BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR);
+
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ if (!(readb(®s->MIICR) & MIICR_RCMD))
+ break;
+ }
+
+ *data = readw(®s->MIIDATA);
+
+ enable_mii_autopoll(regs);
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * mii_check_media_mode - check media state
+ * @regs: velocity registers
+ *
+ * Check the current MII status and determine the link status
+ * accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u16 ANAR;
+
+ if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs))
+ status |= VELOCITY_LINK_FAIL;
+
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs))
+ status |= (VELOCITY_SPEED_1000);
+ else {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if (ANAR & ADVERTISE_100FULL)
+ status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+ else if (ANAR & ADVERTISE_100HALF)
+ status |= VELOCITY_SPEED_100;
+ else if (ANAR & ADVERTISE_10FULL)
+ status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+ else
+ status |= (VELOCITY_SPEED_10);
+ }
+
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_mii_write - write MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: 16bit data for the MII register
+ *
+ * Perform a single write to an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ /* MII reg offset */
+ writeb(mii_addr, ®s->MIIADR);
+ /* set MII data */
+ writew(data, ®s->MIIDATA);
+
+ /* turn on MIICR_WCMD */
+ BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR);
+
+ /* W_MAX_TIMEOUT is the timeout period */
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(5);
+ if (!(readb(®s->MIICR) & MIICR_WCMD))
+ break;
+ }
+ enable_mii_autopoll(regs);
+
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * set_mii_flow_control - flow control setup
+ * @vptr: velocity interface
+ *
+ * Set up the flow control on this interface according to
+ * the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+ /*Enable or Disable PAUSE in ANAR */
+ switch (vptr->options.flow_cntl) {
+ case FLOW_CNTL_TX:
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_RX:
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * mii_set_auto_on - autonegotiate on
+ * @vptr: velocity
+ *
+ * Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs))
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+ else
+ MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u8 PHYSR0;
+ u16 ANAR;
+ PHYSR0 = readb(®s->PHYSR0);
+
+ /*
+ if (!(PHYSR0 & PHYSR0_LINKGD))
+ status|=VELOCITY_LINK_FAIL;
+ */
+
+ if (PHYSR0 & PHYSR0_FDPX)
+ status |= VELOCITY_DUPLEX_FULL;
+
+ if (PHYSR0 & PHYSR0_SPDG)
+ status |= VELOCITY_SPEED_1000;
+ else if (PHYSR0 & PHYSR0_SPD10)
+ status |= VELOCITY_SPEED_10;
+ else
+ status |= VELOCITY_SPEED_100;
+
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_set_media_mode - set media mode
+ * @mii_status: old MII link state
+ *
+ * Check the media link state and configure the flow control
+ * PHY and also velocity hardware setup accordingly. In particular
+ * we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+ u32 curr_status;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+ curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+
+ /* Set mii link status */
+ set_mii_flow_control(vptr);
+
+ /*
+ Check if new status is consistent with current status
+ if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
+ (mii_status==curr_status)) {
+ vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
+ vptr->mii_status=check_connection_type(vptr->mac_regs);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
+ return 0;
+ }
+ */
+
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+ /*
+ * If connection type is AUTO
+ */
+ if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
+ /* clear force MAC mode bit */
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
+ /* set duplex mode of MAC according to duplex mode of MII */
+ MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs);
+
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ } else {
+ u16 CTRL1000;
+ u16 ANAR;
+ u8 CHIPGCR;
+
+ /*
+ * 1. if it's 3119, disable frame bursting in halfduplex mode
+ * and enable it in fullduplex mode
+ * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+ * 3. only enable CD heart beat counter in 10HD mode
+ */
+
+ /* set force MAC mode bit */
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
+
+ CHIPGCR = readb(®s->CHIPGCR);
+
+ if (mii_status & VELOCITY_SPEED_1000)
+ CHIPGCR |= CHIPGCR_FCGMII;
+ else
+ CHIPGCR &= ~CHIPGCR_FCGMII;
+
+ if (mii_status & VELOCITY_DUPLEX_FULL) {
+ CHIPGCR |= CHIPGCR_FCFDX;
+ writeb(CHIPGCR, ®s->CHIPGCR);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
+ } else {
+ CHIPGCR &= ~CHIPGCR_FCFDX;
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
+ writeb(CHIPGCR, ®s->CHIPGCR);
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
+ }
+
+ velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000);
+ CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if ((mii_status & VELOCITY_SPEED_1000) &&
+ (mii_status & VELOCITY_DUPLEX_FULL)) {
+ CTRL1000 |= ADVERTISE_1000FULL;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000);
+
+ if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
+
+ /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */
+ velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR);
+ ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF));
+ if (mii_status & VELOCITY_SPEED_100) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ADVERTISE_100FULL;
+ else
+ ANAR |= ADVERTISE_100HALF;
+ } else if (mii_status & VELOCITY_SPEED_10) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ADVERTISE_10FULL;
+ else
+ ANAR |= ADVERTISE_10HALF;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR);
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */
+ }
+ /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+ /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+ return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ * velocity_print_link_status - link status reporting
+ * @vptr: velocity to report on
+ *
+ * Turn the link status of the velocity card into a kernel log
+ * description of the new link state, detailing speed and duplex
+ * status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
+ } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
+ else if (vptr->mii_status & VELOCITY_SPEED_100)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
+
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
+ } else {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_1000_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps full duplex\n");
+ break;
+ case SPD_DPX_100_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
+ break;
+ case SPD_DPX_100_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
+ break;
+ case SPD_DPX_10_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
+ break;
+ case SPD_DPX_10_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/**
+ * enable_flow_control_ability - flow control
+ * @vptr: veloity to configure
+ *
+ * Set up flow control according to the flow control options
+ * determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ switch (vptr->options.flow_cntl) {
+
+ case FLOW_CNTL_DEFAULT:
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0))
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ else
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0))
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ else
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX:
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_RX:
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ default:
+ break;
+ }
+
+}
+
+/**
+ * velocity_soft_reset - soft reset
+ * @vptr: velocity to reset
+ *
+ * Kick off a soft reset of the velocity adapter and then poll
+ * until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i = 0;
+
+ writel(CR0_SFRST, ®s->CR0Set);
+
+ for (i = 0; i < W_MAX_TIMEOUT; i++) {
+ udelay(5);
+ if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set))
+ break;
+ }
+
+ if (i == W_MAX_TIMEOUT) {
+ writel(CR0_FORSRST, ®s->CR0Set);
+ /* FIXME: PCI POSTING */
+ /* delay 2ms */
+ mdelay(2);
+ }
+ return 0;
+}
+
+/**
+ * velocity_set_multi - filter list change callback
+ * @dev: network device
+ *
+ * Called by the network layer when the filter lists need to change
+ * for a velocity adapter. Reload the CAMs with the new address
+ * filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u8 rx_mode;
+ int i;
+ struct netdev_hw_addr *ha;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ writel(0xffffffff, ®s->MARCAM[0]);
+ writel(0xffffffff, ®s->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+ } else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ writel(0xffffffff, ®s->MARCAM[0]);
+ writel(0xffffffff, ®s->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB);
+ } else {
+ int offset = MCAM_SIZE - vptr->multicast_limit;
+ mac_get_cam_mask(regs, vptr->mCAMmask);
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ mac_set_cam(regs, i + offset, ha->addr);
+ vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+ i++;
+ }
+
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
+ }
+ if (dev->mtu > 1500)
+ rx_mode |= RCR_AL;
+
+ BYTE_REG_BITS_ON(rx_mode, ®s->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ * mii_init - set up MII
+ * @vptr: velocity adapter
+ * @mii_status: links tatus
+ *
+ * Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+ u16 BMCR;
+
+ switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+ case PHYID_CICADA_CS8201:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue.
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ /*
+ * Turn on Link/Activity LED enable bit for CIS8201
+ */
+ MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
+ break;
+ case PHYID_VT3216_32BIT:
+ case PHYID_VT3216_64BIT:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ break;
+
+ case PHYID_MARVELL_1000:
+ case PHYID_MARVELL_1000S:
+ /*
+ * Assert CRS on Transmit
+ */
+ MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ break;
+ default:
+ ;
+ }
+ velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR);
+ if (BMCR & BMCR_ISOLATE) {
+ BMCR &= ~BMCR_ISOLATE;
+ velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR);
+ }
+}
+
+/**
+ * setup_queue_timers - Setup interrupt timers
+ *
+ * Setup interrupt frequency during suppression (timeout if the frame
+ * count isn't filled).
+ */
+static void setup_queue_timers(struct velocity_info *vptr)
+{
+ /* Only for newer revisions */
+ if (vptr->rev_id >= REV_ID_VT3216_A0) {
+ u8 txqueue_timer = 0;
+ u8 rxqueue_timer = 0;
+
+ if (vptr->mii_status & (VELOCITY_SPEED_1000 |
+ VELOCITY_SPEED_100)) {
+ txqueue_timer = vptr->options.txqueue_timer;
+ rxqueue_timer = vptr->options.rxqueue_timer;
+ }
+
+ writeb(txqueue_timer, &vptr->mac_regs->TQETMR);
+ writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
+ }
+}
+
+/**
+ * setup_adaptive_interrupts - Setup interrupt suppression
+ *
+ * @vptr velocity adapter
+ *
+ * The velocity is able to suppress interrupt during high interrupt load.
+ * This function turns on that feature.
+ */
+static void setup_adaptive_interrupts(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 tx_intsup = vptr->options.tx_intsup;
+ u16 rx_intsup = vptr->options.rx_intsup;
+
+ /* Setup default interrupt mask (will be changed below) */
+ vptr->int_mask = INT_MASK_DEF;
+
+ /* Set Tx Interrupt Suppression Threshold */
+ writeb(CAMCR_PS0, ®s->CAMCR);
+ if (tx_intsup != 0) {
+ vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I |
+ ISR_PTX2I | ISR_PTX3I);
+ writew(tx_intsup, ®s->ISRCTL);
+ } else
+ writew(ISRCTL_TSUPDIS, ®s->ISRCTL);
+
+ /* Set Rx Interrupt Suppression Threshold */
+ writeb(CAMCR_PS1, ®s->CAMCR);
+ if (rx_intsup != 0) {
+ vptr->int_mask &= ~ISR_PRXI;
+ writew(rx_intsup, ®s->ISRCTL);
+ } else
+ writew(ISRCTL_RSUPDIS, ®s->ISRCTL);
+
+ /* Select page to interrupt hold timer */
+ writeb(0, ®s->CAMCR);
+}
+
+/**
+ * velocity_init_registers - initialise MAC registers
+ * @vptr: velocity to init
+ * @type: type of initialisation (hot or cold)
+ *
+ * Initialise the MAC on a reset or on first set up on the
+ * hardware.
+ */
+static void velocity_init_registers(struct velocity_info *vptr,
+ enum velocity_init_type type)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i, mii_status;
+
+ mac_wol_reset(regs);
+
+ switch (type) {
+ case VELOCITY_INIT_RESET:
+ case VELOCITY_INIT_WOL:
+
+ netif_stop_queue(vptr->dev);
+
+ /*
+ * Reset RX to prevent RX pointer not on the 4X location
+ */
+ velocity_rx_reset(vptr);
+ mac_rx_queue_run(regs);
+ mac_rx_queue_wake(regs);
+
+ mii_status = velocity_get_opt_media_mode(vptr);
+ if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+ velocity_print_link_status(vptr);
+ if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+ netif_wake_queue(vptr->dev);
+ }
+
+ enable_flow_control_ability(vptr);
+
+ mac_clear_isr(regs);
+ writel(CR0_STOP, ®s->CR0Clr);
+ writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT),
+ ®s->CR0Set);
+
+ break;
+
+ case VELOCITY_INIT_COLD:
+ default:
+ /*
+ * Do reset
+ */
+ velocity_soft_reset(vptr);
+ mdelay(5);
+
+ mac_eeprom_reload(regs);
+ for (i = 0; i < 6; i++)
+ writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
+
+ /*
+ * clear Pre_ACPI bit.
+ */
+ BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA));
+ mac_set_rx_thresh(regs, vptr->options.rx_thresh);
+ mac_set_dma_length(regs, vptr->options.DMA_length);
+
+ writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet);
+ /*
+ * Back off algorithm use original IEEE standard
+ */
+ BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB);
+
+ /*
+ * Init CAM filter
+ */
+ velocity_init_cam_filter(vptr);
+
+ /*
+ * Set packet filter: Receive directed and broadcast address
+ */
+ velocity_set_multi(vptr->dev);
+
+ /*
+ * Enable MII auto-polling
+ */
+ enable_mii_autopoll(regs);
+
+ setup_adaptive_interrupts(vptr);
+
+ writel(vptr->rx.pool_dma, ®s->RDBaseLo);
+ writew(vptr->options.numrx - 1, ®s->RDCSize);
+ mac_rx_queue_run(regs);
+ mac_rx_queue_wake(regs);
+
+ writew(vptr->options.numtx - 1, ®s->TDCSize);
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ writel(vptr->tx.pool_dma[i], ®s->TDBaseLo[i]);
+ mac_tx_queue_run(regs, i);
+ }
+
+ init_flow_control_register(vptr);
+
+ writel(CR0_STOP, ®s->CR0Clr);
+ writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set);
+
+ mii_status = velocity_get_opt_media_mode(vptr);
+ netif_stop_queue(vptr->dev);
+
+ mii_init(vptr, mii_status);
+
+ if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+ velocity_print_link_status(vptr);
+ if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+ netif_wake_queue(vptr->dev);
+ }
+
+ enable_flow_control_ability(vptr);
+ mac_hw_mibs_init(regs);
+ mac_write_int_mask(vptr->int_mask, regs);
+ mac_clear_isr(regs);
+
+ }
+}
+
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int avail, dirty, unusable;
+
+ /*
+ * RD number must be equal to 4X per hardware spec
+ * (programming guide rev 1.20, p.13)
+ */
+ if (vptr->rx.filled < 4)
+ return;
+
+ wmb();
+
+ unusable = vptr->rx.filled & 0x0003;
+ dirty = vptr->rx.dirty - unusable;
+ for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
+ dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+ vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+ }
+
+ writew(vptr->rx.filled & 0xfffc, ®s->RBRDU);
+ vptr->rx.filled = unusable;
+}
+
+/**
+ * velocity_init_dma_rings - set up DMA rings
+ * @vptr: Velocity to set up
+ *
+ * Allocate PCI mapped DMA rings for the receive and transmit layer
+ * to use.
+ */
+static int velocity_init_dma_rings(struct velocity_info *vptr)
+{
+ struct velocity_opt *opt = &vptr->options;
+ const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
+ const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
+ struct pci_dev *pdev = vptr->pdev;
+ dma_addr_t pool_dma;
+ void *pool;
+ unsigned int i;
+
+ /*
+ * Allocate all RD/TD rings a single pool.
+ *
+ * pci_alloc_consistent() fulfills the requirement for 64 bytes
+ * alignment
+ */
+ pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
+ rx_ring_size, &pool_dma);
+ if (!pool) {
+ dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
+ vptr->dev->name);
+ return -ENOMEM;
+ }
+
+ vptr->rx.ring = pool;
+ vptr->rx.pool_dma = pool_dma;
+
+ pool += rx_ring_size;
+ pool_dma += rx_ring_size;
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ vptr->tx.rings[i] = pool;
+ vptr->tx.pool_dma[i] = pool_dma;
+ pool += tx_ring_size;
+ pool_dma += tx_ring_size;
+ }
+
+ return 0;
+}
+
+static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
+{
+ vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+}
+
+/**
+ * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * @vptr: velocity
+ * @idx: ring index
+ *
+ * Allocate a new full sized buffer for the reception of a frame and
+ * map it into PCI space for the hardware to use. The hardware
+ * requires *64* byte alignment of the buffer which makes life
+ * less fun than would be ideal.
+ */
+static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
+{
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+
+ rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
+ if (rd_info->skb == NULL)
+ return -ENOMEM;
+
+ /*
+ * Do the gymnastics to get the buffer head for data at
+ * 64byte alignment.
+ */
+ skb_reserve(rd_info->skb,
+ 64 - ((unsigned long) rd_info->skb->data & 63));
+ rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+ vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
+
+ /*
+ * Fill in the descriptor to match
+ */
+
+ *((u32 *) & (rd->rdesc0)) = 0;
+ rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
+ rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+ rd->pa_high = 0;
+ return 0;
+}
+
+
+static int velocity_rx_refill(struct velocity_info *vptr)
+{
+ int dirty = vptr->rx.dirty, done = 0;
+
+ do {
+ struct rx_desc *rd = vptr->rx.ring + dirty;
+
+ /* Fine for an all zero Rx desc at init time as well */
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if (!vptr->rx.info[dirty].skb) {
+ if (velocity_alloc_rx_buf(vptr, dirty) < 0)
+ break;
+ }
+ done++;
+ dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
+ } while (dirty != vptr->rx.curr);
+
+ if (done) {
+ vptr->rx.dirty = dirty;
+ vptr->rx.filled += done;
+ }
+
+ return done;
+}
+
+/**
+ * velocity_free_rd_ring - free receive ring
+ * @vptr: velocity to clean up
+ *
+ * Free the receive buffers for each ring slot and any
+ * attached socket buffers that need to go away.
+ */
+static void velocity_free_rd_ring(struct velocity_info *vptr)
+{
+ int i;
+
+ if (vptr->rx.info == NULL)
+ return;
+
+ for (i = 0; i < vptr->options.numrx; i++) {
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+ struct rx_desc *rd = vptr->rx.ring + i;
+
+ memset(rd, 0, sizeof(*rd));
+
+ if (!rd_info->skb)
+ continue;
+ pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
+ PCI_DMA_FROMDEVICE);
+ rd_info->skb_dma = 0;
+
+ dev_kfree_skb(rd_info->skb);
+ rd_info->skb = NULL;
+ }
+
+ kfree(vptr->rx.info);
+ vptr->rx.info = NULL;
+}
+
+/**
+ * velocity_init_rd_ring - set up receive ring
+ * @vptr: velocity to configure
+ *
+ * Allocate and set up the receive buffers for each ring slot and
+ * assign them to the network adapter.
+ */
+static int velocity_init_rd_ring(struct velocity_info *vptr)
+{
+ int ret = -ENOMEM;
+
+ vptr->rx.info = kcalloc(vptr->options.numrx,
+ sizeof(struct velocity_rd_info), GFP_KERNEL);
+ if (!vptr->rx.info)
+ goto out;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ if (velocity_rx_refill(vptr) != vptr->options.numrx) {
+ VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
+ "%s: failed to allocate RX buffer.\n", vptr->dev->name);
+ velocity_free_rd_ring(vptr);
+ goto out;
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+/**
+ * velocity_init_td_ring - set up transmit ring
+ * @vptr: velocity
+ *
+ * Set up the transmit ring and chain the ring pointers together.
+ * Returns zero on success or a negative posix errno code for
+ * failure.
+ */
+static int velocity_init_td_ring(struct velocity_info *vptr)
+{
+ int j;
+
+ /* Init the TD ring entries */
+ for (j = 0; j < vptr->tx.numq; j++) {
+
+ vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
+ sizeof(struct velocity_td_info),
+ GFP_KERNEL);
+ if (!vptr->tx.infos[j]) {
+ while (--j >= 0)
+ kfree(vptr->tx.infos[j]);
+ return -ENOMEM;
+ }
+
+ vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
+ }
+ return 0;
+}
+
+/**
+ * velocity_free_dma_rings - free PCI ring pointers
+ * @vptr: Velocity to free from
+ *
+ * Clean up the PCI ring buffers allocated to this velocity.
+ */
+static void velocity_free_dma_rings(struct velocity_info *vptr)
+{
+ const int size = vptr->options.numrx * sizeof(struct rx_desc) +
+ vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+
+ pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
+}
+
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+ int ret;
+
+ velocity_set_rxbufsize(vptr, mtu);
+
+ ret = velocity_init_dma_rings(vptr);
+ if (ret < 0)
+ goto out;
+
+ ret = velocity_init_rd_ring(vptr);
+ if (ret < 0)
+ goto err_free_dma_rings_0;
+
+ ret = velocity_init_td_ring(vptr);
+ if (ret < 0)
+ goto err_free_rd_ring_1;
+out:
+ return ret;
+
+err_free_rd_ring_1:
+ velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+ velocity_free_dma_rings(vptr);
+ goto out;
+}
+
+/**
+ * velocity_free_tx_buf - free transmit buffer
+ * @vptr: velocity
+ * @tdinfo: buffer
+ *
+ * Release an transmit buffer. If the buffer was preallocated then
+ * recycle it, if not then unmap the buffer.
+ */
+static void velocity_free_tx_buf(struct velocity_info *vptr,
+ struct velocity_td_info *tdinfo, struct tx_desc *td)
+{
+ struct sk_buff *skb = tdinfo->skb;
+
+ /*
+ * Don't unmap the pre-allocated tx_bufs
+ */
+ if (tdinfo->skb_dma) {
+ int i;
+
+ for (i = 0; i < tdinfo->nskb_dma; i++) {
+ size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN);
+
+ /* For scatter-gather */
+ if (skb_shinfo(skb)->nr_frags > 0)
+ pktlen = max_t(size_t, pktlen,
+ td->td_buf[i].size & ~TD_QUEUE);
+
+ pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i],
+ le16_to_cpu(pktlen), PCI_DMA_TODEVICE);
+ }
+ }
+ dev_kfree_skb_irq(skb);
+ tdinfo->skb = NULL;
+}
+
+/*
+ * FIXME: could we merge this with velocity_free_tx_buf ?
+ */
+static void velocity_free_td_ring_entry(struct velocity_info *vptr,
+ int q, int n)
+{
+ struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]);
+ int i;
+
+ if (td_info == NULL)
+ return;
+
+ if (td_info->skb) {
+ for (i = 0; i < td_info->nskb_dma; i++) {
+ if (td_info->skb_dma[i]) {
+ pci_unmap_single(vptr->pdev, td_info->skb_dma[i],
+ td_info->skb->len, PCI_DMA_TODEVICE);
+ td_info->skb_dma[i] = 0;
+ }
+ }
+ dev_kfree_skb(td_info->skb);
+ td_info->skb = NULL;
+ }
+}
+
+/**
+ * velocity_free_td_ring - free td ring
+ * @vptr: velocity
+ *
+ * Free up the transmit ring for this particular velocity adapter.
+ * We free the ring contents but not the ring itself.
+ */
+static void velocity_free_td_ring(struct velocity_info *vptr)
+{
+ int i, j;
+
+ for (j = 0; j < vptr->tx.numq; j++) {
+ if (vptr->tx.infos[j] == NULL)
+ continue;
+ for (i = 0; i < vptr->options.numtx; i++)
+ velocity_free_td_ring_entry(vptr, j, i);
+
+ kfree(vptr->tx.infos[j]);
+ vptr->tx.infos[j] = NULL;
+ }
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+ velocity_free_td_ring(vptr);
+ velocity_free_rd_ring(vptr);
+ velocity_free_dma_rings(vptr);
+}
+
+/**
+ * velocity_error - handle error from controller
+ * @vptr: velocity
+ * @status: card status
+ *
+ * Process an error report from the hardware and attempt to recover
+ * the card itself. At the moment we cannot recover from some
+ * theoretically impossible errors but this could be fixed using
+ * the pci_device_failed logic to bounce the hardware
+ *
+ */
+static void velocity_error(struct velocity_info *vptr, int status)
+{
+
+ if (status & ISR_TXSTLI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0]));
+ BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR);
+ writew(TRDCSR_RUN, ®s->TDCSRClr);
+ netif_stop_queue(vptr->dev);
+
+ /* FIXME: port over the pci_device_failed code and use it
+ here */
+ }
+
+ if (status & ISR_SRCI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int linked;
+
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ vptr->mii_status = check_connection_type(regs);
+
+ /*
+ * If it is a 3119, disable frame bursting in
+ * halfduplex mode and enable it in fullduplex
+ * mode
+ */
+ if (vptr->rev_id < REV_ID_VT3216_A0) {
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
+ else
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
+ }
+ /*
+ * Only enable CD heart beat counter in 10HD mode
+ */
+ if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
+
+ setup_queue_timers(vptr);
+ }
+ /*
+ * Get link status from PHYSR0
+ */
+ linked = readb(®s->PHYSR0) & PHYSR0_LINKGD;
+
+ if (linked) {
+ vptr->mii_status &= ~VELOCITY_LINK_FAIL;
+ netif_carrier_on(vptr->dev);
+ } else {
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ netif_carrier_off(vptr->dev);
+ }
+
+ velocity_print_link_status(vptr);
+ enable_flow_control_ability(vptr);
+
+ /*
+ * Re-enable auto-polling because SRCI will disable
+ * auto-polling
+ */
+
+ enable_mii_autopoll(regs);
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL)
+ netif_stop_queue(vptr->dev);
+ else
+ netif_wake_queue(vptr->dev);
+
+ }
+ if (status & ISR_MIBFI)
+ velocity_update_hw_mibs(vptr);
+ if (status & ISR_LSTEI)
+ mac_rx_queue_wake(vptr->mac_regs);
+}
+
+/**
+ * tx_srv - transmit interrupt service
+ * @vptr; Velocity
+ *
+ * Scan the queues looking for transmitted packets that
+ * we can complete and clean up. Update any statistics as
+ * necessary/
+ */
+static int velocity_tx_srv(struct velocity_info *vptr)
+{
+ struct tx_desc *td;
+ int qnum;
+ int full = 0;
+ int idx;
+ int works = 0;
+ struct velocity_td_info *tdinfo;
+ struct net_device_stats *stats = &vptr->dev->stats;
+
+ for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+ for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
+ idx = (idx + 1) % vptr->options.numtx) {
+
+ /*
+ * Get Tx Descriptor
+ */
+ td = &(vptr->tx.rings[qnum][idx]);
+ tdinfo = &(vptr->tx.infos[qnum][idx]);
+
+ if (td->tdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if ((works++ > 15))
+ break;
+
+ if (td->tdesc0.TSR & TSR0_TERR) {
+ stats->tx_errors++;
+ stats->tx_dropped++;
+ if (td->tdesc0.TSR & TSR0_CDH)
+ stats->tx_heartbeat_errors++;
+ if (td->tdesc0.TSR & TSR0_CRS)
+ stats->tx_carrier_errors++;
+ if (td->tdesc0.TSR & TSR0_ABT)
+ stats->tx_aborted_errors++;
+ if (td->tdesc0.TSR & TSR0_OWC)
+ stats->tx_window_errors++;
+ } else {
+ stats->tx_packets++;
+ stats->tx_bytes += tdinfo->skb->len;
+ }
+ velocity_free_tx_buf(vptr, tdinfo, td);
+ vptr->tx.used[qnum]--;
+ }
+ vptr->tx.tail[qnum] = idx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ full = 1;
+ }
+ /*
+ * Look to see if we should kick the transmit network
+ * layer for more work.
+ */
+ if (netif_queue_stopped(vptr->dev) && (full == 0) &&
+ (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+ netif_wake_queue(vptr->dev);
+ }
+ return works;
+}
+
+/**
+ * velocity_rx_csum - checksum process
+ * @rd: receive packet descriptor
+ * @skb: network layer packet buffer
+ *
+ * Process the status bits for the received packet and determine
+ * if the checksum was computed and verified by the hardware
+ */
+static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ if (rd->rdesc1.CSM & CSM_IPKT) {
+ if (rd->rdesc1.CSM & CSM_IPOK) {
+ if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+ (rd->rdesc1.CSM & CSM_UDPKT)) {
+ if (!(rd->rdesc1.CSM & CSM_TUPOK))
+ return;
+ }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ }
+}
+
+/**
+ * velocity_rx_copy - in place Rx copy for small packets
+ * @rx_skb: network layer packet buffer candidate
+ * @pkt_size: received data size
+ * @rd: receive packet descriptor
+ * @dev: network device
+ *
+ * Replace the current skb that is scheduled for Rx processing by a
+ * shorter, immediately allocated skb, if the received packet is small
+ * enough. This function returns a negative value if the received
+ * packet is too big or if memory is exhausted.
+ */
+static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
+ struct velocity_info *vptr)
+{
+ int ret = -1;
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *new_skb;
+
+ new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size);
+ if (new_skb) {
+ new_skb->ip_summed = rx_skb[0]->ip_summed;
+ skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
+ *rx_skb = new_skb;
+ ret = 0;
+ }
+
+ }
+ return ret;
+}
+
+/**
+ * velocity_iph_realign - IP header alignment
+ * @vptr: velocity we are handling
+ * @skb: network layer packet buffer
+ * @pkt_size: received data size
+ *
+ * Align IP header on a 2 bytes boundary. This behavior can be
+ * configured by the user.
+ */
+static inline void velocity_iph_realign(struct velocity_info *vptr,
+ struct sk_buff *skb, int pkt_size)
+{
+ if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+ memmove(skb->data + 2, skb->data, pkt_size);
+ skb_reserve(skb, 2);
+ }
+}
+
+/**
+ * velocity_receive_frame - received packet processor
+ * @vptr: velocity we are handling
+ * @idx: ring index
+ *
+ * A packet has arrived. We process the packet and if appropriate
+ * pass the frame up the network stack
+ */
+static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+{
+ void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
+ struct net_device_stats *stats = &vptr->dev->stats;
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
+ struct sk_buff *skb;
+
+ if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
+ VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+
+ if (rd->rdesc0.RSR & RSR_MAR)
+ stats->multicast++;
+
+ skb = rd_info->skb;
+
+ pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
+ vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
+
+ /*
+ * Drop frame not meeting IEEE 802.3
+ */
+
+ if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
+ if (rd->rdesc0.RSR & RSR_RL) {
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+ }
+
+ pci_action = pci_dma_sync_single_for_device;
+
+ velocity_rx_csum(rd, skb);
+
+ if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
+ velocity_iph_realign(vptr, skb, pkt_len);
+ pci_action = pci_unmap_single;
+ rd_info->skb = NULL;
+ }
+
+ pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, vptr->dev);
+
+ if (rd->rdesc0.RSR & RSR_DETAG) {
+ u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG));
+
+ __vlan_hwaccel_put_tag(skb, vid);
+ }
+ netif_rx(skb);
+
+ stats->rx_bytes += pkt_len;
+ stats->rx_packets++;
+
+ return 0;
+}
+
+/**
+ * velocity_rx_srv - service RX interrupt
+ * @vptr: velocity
+ *
+ * Walk the receive ring of the velocity adapter and remove
+ * any received packets from the receive queue. Hand the ring
+ * slots back to the adapter for reuse.
+ */
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
+{
+ struct net_device_stats *stats = &vptr->dev->stats;
+ int rd_curr = vptr->rx.curr;
+ int works = 0;
+
+ while (works < budget_left) {
+ struct rx_desc *rd = vptr->rx.ring + rd_curr;
+
+ if (!vptr->rx.info[rd_curr].skb)
+ break;
+
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ rmb();
+
+ /*
+ * Don't drop CE or RL error frame although RXOK is off
+ */
+ if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
+ if (velocity_receive_frame(vptr, rd_curr) < 0)
+ stats->rx_dropped++;
+ } else {
+ if (rd->rdesc0.RSR & RSR_CRC)
+ stats->rx_crc_errors++;
+ if (rd->rdesc0.RSR & RSR_FAE)
+ stats->rx_frame_errors++;
+
+ stats->rx_dropped++;
+ }
+
+ rd->size |= RX_INTEN;
+
+ rd_curr++;
+ if (rd_curr >= vptr->options.numrx)
+ rd_curr = 0;
+ works++;
+ }
+
+ vptr->rx.curr = rd_curr;
+
+ if ((works > 0) && (velocity_rx_refill(vptr) > 0))
+ velocity_give_many_rx_descs(vptr);
+
+ VAR_USED(stats);
+ return works;
+}
+
+static int velocity_poll(struct napi_struct *napi, int budget)
+{
+ struct velocity_info *vptr = container_of(napi,
+ struct velocity_info, napi);
+ unsigned int rx_done;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ /*
+ * Do rx and tx twice for performance (taken from the VIA
+ * out-of-tree driver).
+ */
+ rx_done = velocity_rx_srv(vptr, budget / 2);
+ velocity_tx_srv(vptr);
+ rx_done += velocity_rx_srv(vptr, budget - rx_done);
+ velocity_tx_srv(vptr);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (rx_done < budget) {
+ napi_complete(napi);
+ mac_enable_int(vptr->mac_regs);
+ }
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ return rx_done;
+}
+
+/**
+ * velocity_intr - interrupt callback
+ * @irq: interrupt number
+ * @dev_instance: interrupting device
+ *
+ * Called whenever an interrupt is generated by the velocity
+ * adapter IRQ line. We may not be the source of the interrupt
+ * and need to identify initially if we are, and if not exit as
+ * efficiently as possible.
+ */
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 isr_status;
+
+ spin_lock(&vptr->lock);
+ isr_status = mac_read_isr(vptr->mac_regs);
+
+ /* Not us ? */
+ if (isr_status == 0) {
+ spin_unlock(&vptr->lock);
+ return IRQ_NONE;
+ }
+
+ /* Ack the interrupt */
+ mac_write_isr(vptr->mac_regs, isr_status);
+
+ if (likely(napi_schedule_prep(&vptr->napi))) {
+ mac_disable_int(vptr->mac_regs);
+ __napi_schedule(&vptr->napi);
+ }
+
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+
+ spin_unlock(&vptr->lock);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * velocity_open - interface activation callback
+ * @dev: network layer device to open
+ *
+ * Called when the network layer brings the interface up. Returns
+ * a negative posix error code on failure, or zero on success.
+ *
+ * All the ring allocation and set up is done on open for this
+ * adapter to minimise memory usage when inactive
+ */
+static int velocity_open(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ ret = velocity_init_rings(vptr, dev->mtu);
+ if (ret < 0)
+ goto out;
+
+ /* Ensure chip is running */
+ pci_set_power_state(vptr->pdev, PCI_D0);
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED,
+ dev->name, dev);
+ if (ret < 0) {
+ /* Power down the chip */
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+ velocity_free_rings(vptr);
+ goto out;
+ }
+
+ velocity_give_many_rx_descs(vptr);
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+ napi_enable(&vptr->napi);
+ vptr->flags |= VELOCITY_FLAGS_OPENED;
+out:
+ return ret;
+}
+
+/**
+ * velocity_shutdown - shut down the chip
+ * @vptr: velocity to deactivate
+ *
+ * Shuts down the internal operations of the velocity and
+ * disables interrupts, autopolling, transmit and receive
+ */
+static void velocity_shutdown(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ mac_disable_int(regs);
+ writel(CR0_STOP, ®s->CR0Set);
+ writew(0xFFFF, ®s->TDCSRClr);
+ writeb(0xFF, ®s->RDCSRClr);
+ safe_disable_mii_autopoll(regs);
+ mac_clear_isr(regs);
+}
+
+/**
+ * velocity_change_mtu - MTU change callback
+ * @dev: network device
+ * @new_mtu: desired MTU
+ *
+ * Handle requests from the networking layer for MTU change on
+ * this interface. It gets called on a change by the network layer.
+ * Return zero for success or negative posix error code.
+ */
+static int velocity_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret = 0;
+
+ if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
+ VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
+ vptr->dev->name);
+ ret = -EINVAL;
+ goto out_0;
+ }
+
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ goto out_0;
+ }
+
+ if (dev->mtu != new_mtu) {
+ struct velocity_info *tmp_vptr;
+ unsigned long flags;
+ struct rx_info rx;
+ struct tx_info tx;
+
+ tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+ if (!tmp_vptr) {
+ ret = -ENOMEM;
+ goto out_0;
+ }
+
+ tmp_vptr->dev = dev;
+ tmp_vptr->pdev = vptr->pdev;
+ tmp_vptr->options = vptr->options;
+ tmp_vptr->tx.numq = vptr->tx.numq;
+
+ ret = velocity_init_rings(tmp_vptr, new_mtu);
+ if (ret < 0)
+ goto out_free_tmp_vptr_1;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ rx = vptr->rx;
+ tx = vptr->tx;
+
+ vptr->rx = tmp_vptr->rx;
+ vptr->tx = tmp_vptr->tx;
+
+ tmp_vptr->rx = rx;
+ tmp_vptr->tx = tx;
+
+ dev->mtu = new_mtu;
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ velocity_give_many_rx_descs(vptr);
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+ kfree(tmp_vptr);
+ }
+out_0:
+ return ret;
+}
+
+/**
+ * velocity_mii_ioctl - MII ioctl handler
+ * @dev: network device
+ * @ifr: the ifreq block for the ioctl
+ * @cmd: the command
+ *
+ * Process MII requests made via ioctl from the network layer. These
+ * are used by tools like kudzu to interrogate the link state of the
+ * hardware
+ */
+static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+ struct mii_ioctl_data *miidata = if_mii(ifr);
+ int err;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ miidata->phy_id = readb(®s->MIIADR) & 0x1f;
+ break;
+ case SIOCGMIIREG:
+ if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
+ return -ETIMEDOUT;
+ break;
+ case SIOCSMIIREG:
+ spin_lock_irqsave(&vptr->lock, flags);
+ err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ check_connection_type(vptr->mac_regs);
+ if (err)
+ return err;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * velocity_ioctl - ioctl entry point
+ * @dev: network device
+ * @rq: interface request ioctl
+ * @cmd: command code
+ *
+ * Called when the user issues an ioctl request to the network
+ * device in question. The velocity interface supports MII.
+ */
+static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ /* If we are asked for information and the device is power
+ saving then we need to bring the device back up to talk to it */
+
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D0);
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCSMIIREG: /* Write to MII PHY register. */
+ ret = velocity_mii_ioctl(dev, rq, cmd);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+
+
+ return ret;
+}
+
+/**
+ * velocity_get_status - statistics callback
+ * @dev: network device
+ *
+ * Callback from the network layer to allow driver statistics
+ * to be resynchronized with hardware collected state. In the
+ * case of the velocity we need to pull the MIB counters from
+ * the hardware into the counters before letting the network
+ * layer display them.
+ */
+static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ /* If the hardware is down, don't touch MII */
+ if (!netif_running(dev))
+ return &dev->stats;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+ dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+ dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+
+// unsigned long rx_dropped; /* no space in linux buffers */
+ dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+ /* detailed rx_errors: */
+// unsigned long rx_length_errors;
+// unsigned long rx_over_errors; /* receiver ring buff overflow */
+ dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+// unsigned long rx_frame_errors; /* recv'd frame alignment error */
+// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+// unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+// unsigned long tx_fifo_errors;
+
+ return &dev->stats;
+}
+
+/**
+ * velocity_close - close adapter callback
+ * @dev: network device
+ *
+ * Callback from the network layer when the velocity is being
+ * deactivated by the network layer
+ */
+static int velocity_close(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ napi_disable(&vptr->napi);
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
+ velocity_get_ip(vptr);
+ if (dev->irq != 0)
+ free_irq(dev->irq, dev);
+
+ /* Power down the chip */
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+
+ velocity_free_rings(vptr);
+
+ vptr->flags &= (~VELOCITY_FLAGS_OPENED);
+ return 0;
+}
+
+/**
+ * velocity_xmit - transmit packet callback
+ * @skb: buffer to transmit
+ * @dev: network device
+ *
+ * Called by the networ layer to request a packet is queued to
+ * the velocity. Returns zero on success.
+ */
+static netdev_tx_t velocity_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int qnum = 0;
+ struct tx_desc *td_ptr;
+ struct velocity_td_info *tdinfo;
+ unsigned long flags;
+ int pktlen;
+ int index, prev;
+ int i = 0;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ goto out;
+
+ /* The hardware can handle at most 7 memory segments, so merge
+ * the skb if there are more */
+ if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ pktlen = skb_shinfo(skb)->nr_frags == 0 ?
+ max_t(unsigned int, skb->len, ETH_ZLEN) :
+ skb_headlen(skb);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ index = vptr->tx.curr[qnum];
+ td_ptr = &(vptr->tx.rings[qnum][index]);
+ tdinfo = &(vptr->tx.infos[qnum][index]);
+
+ td_ptr->tdesc1.TCR = TCR0_TIC;
+ td_ptr->td_buf[0].size &= ~TD_QUEUE;
+
+ /*
+ * Map the linear network buffer into PCI space and
+ * add it to the transmit ring.
+ */
+ tdinfo->skb = skb;
+ tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
+ td_ptr->tdesc0.len = cpu_to_le16(pktlen);
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+ td_ptr->td_buf[0].pa_high = 0;
+ td_ptr->td_buf[0].size = cpu_to_le16(pktlen);
+
+ /* Handle fragments */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ tdinfo->skb_dma[i + 1] = pci_map_page(vptr->pdev, frag->page,
+ frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+
+ td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+ td_ptr->td_buf[i + 1].pa_high = 0;
+ td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
+ }
+ tdinfo->nskb_dma = i + 1;
+
+ td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
+
+ if (vlan_tx_tag_present(skb)) {
+ td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb));
+ td_ptr->tdesc1.TCR |= TCR0_VETAG;
+ }
+
+ /*
+ * Handle hardware checksum
+ */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ const struct iphdr *ip = ip_hdr(skb);
+ if (ip->protocol == IPPROTO_TCP)
+ td_ptr->tdesc1.TCR |= TCR0_TCPCK;
+ else if (ip->protocol == IPPROTO_UDP)
+ td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+ td_ptr->tdesc1.TCR |= TCR0_IPCK;
+ }
+
+ prev = index - 1;
+ if (prev < 0)
+ prev = vptr->options.numtx - 1;
+ td_ptr->tdesc0.len |= OWNED_BY_NIC;
+ vptr->tx.used[qnum]++;
+ vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ netif_stop_queue(dev);
+
+ td_ptr = &(vptr->tx.rings[qnum][prev]);
+ td_ptr->td_buf[0].size |= TD_QUEUE;
+ mac_tx_queue_wake(vptr->mac_regs, qnum);
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+out:
+ return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops velocity_netdev_ops = {
+ .ndo_open = velocity_open,
+ .ndo_stop = velocity_close,
+ .ndo_start_xmit = velocity_xmit,
+ .ndo_get_stats = velocity_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_multicast_list = velocity_set_multi,
+ .ndo_change_mtu = velocity_change_mtu,
+ .ndo_do_ioctl = velocity_ioctl,
+ .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
+};
+
+/**
+ * velocity_init_info - init private data
+ * @pdev: PCI device
+ * @vptr: Velocity info
+ * @info: Board type
+ *
+ * Set up the initial velocity_info struct for the device that has been
+ * discovered.
+ */
+static void __devinit velocity_init_info(struct pci_dev *pdev,
+ struct velocity_info *vptr,
+ const struct velocity_info_tbl *info)
+{
+ memset(vptr, 0, sizeof(struct velocity_info));
+
+ vptr->pdev = pdev;
+ vptr->chip_id = info->chip_id;
+ vptr->tx.numq = info->txqueue;
+ vptr->multicast_limit = MCAM_SIZE;
+ spin_lock_init(&vptr->lock);
+}
+
+/**
+ * velocity_get_pci_info - retrieve PCI info for device
+ * @vptr: velocity device
+ * @pdev: PCI device it matches
+ *
+ * Retrieve the PCI configuration space data that interests us from
+ * the kernel PCI layer
+ */
+static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
+{
+ vptr->rev_id = pdev->revision;
+
+ pci_set_master(pdev);
+
+ vptr->ioaddr = pci_resource_start(pdev, 0);
+ vptr->memaddr = pci_resource_start(pdev, 1);
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #0 is not an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #1 is an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+ dev_err(&pdev->dev, "region #1 is too small.\n");
+ return -EINVAL;
+ }
+ vptr->pdev = pdev;
+
+ return 0;
+}
+
+/**
+ * velocity_print_info - per driver data
+ * @vptr: velocity
+ *
+ * Print per driver data as the kernel driver finds Velocity
+ * hardware
+ */
+static void __devinit velocity_print_info(struct velocity_info *vptr)
+{
+ struct net_device *dev = vptr->dev;
+
+ printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
+ printk(KERN_INFO "%s: Ethernet Address: %pM\n",
+ dev->name, dev->dev_addr);
+}
+
+static u32 velocity_get_link(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0;
+}
+
+/**
+ * velocity_found1 - set up discovered velocity card
+ * @pdev: PCI device
+ * @ent: PCI device table entry that matched
+ *
+ * Configure a discovered adapter from scratch. Return a negative
+ * errno error code on failure paths.
+ */
+static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int first = 1;
+ struct net_device *dev;
+ int i;
+ const char *drv_string;
+ const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
+ struct velocity_info *vptr;
+ struct mac_regs __iomem *regs;
+ int ret = -ENOMEM;
+
+ /* FIXME: this driver, like almost all other ethernet drivers,
+ * can support more than MAX_UNITS.
+ */
+ if (velocity_nics >= MAX_UNITS) {
+ dev_notice(&pdev->dev, "already found %d NICs.\n",
+ velocity_nics);
+ return -ENODEV;
+ }
+
+ dev = alloc_etherdev(sizeof(struct velocity_info));
+ if (!dev) {
+ dev_err(&pdev->dev, "allocate net device failed.\n");
+ goto out;
+ }
+
+ /* Chain it all together */
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ vptr = netdev_priv(dev);
+
+
+ if (first) {
+ printk(KERN_INFO "%s Ver. %s\n",
+ VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+ printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+ printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
+ first = 0;
+ }
+
+ velocity_init_info(pdev, vptr, info);
+
+ vptr->dev = dev;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto err_free_dev;
+
+ dev->irq = pdev->irq;
+
+ ret = velocity_get_pci_info(vptr, pdev);
+ if (ret < 0) {
+ /* error message already printed */
+ goto err_disable;
+ }
+
+ ret = pci_request_regions(pdev, VELOCITY_NAME);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "No PCI resources.\n");
+ goto err_disable;
+ }
+
+ regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
+ if (regs == NULL) {
+ ret = -EIO;
+ goto err_release_res;
+ }
+
+ vptr->mac_regs = regs;
+
+ mac_wol_reset(regs);
+
+ dev->base_addr = vptr->ioaddr;
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = readb(®s->PAR[i]);
+
+
+ drv_string = dev_driver_string(&pdev->dev);
+
+ velocity_get_options(&vptr->options, velocity_nics, drv_string);
+
+ /*
+ * Mask out the options cannot be set to the chip
+ */
+
+ vptr->options.flags &= info->flags;
+
+ /*
+ * Enable the chip specified capbilities
+ */
+
+ vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
+
+ vptr->wol_opts = vptr->options.wol_opts;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+
+ vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
+
+ dev->irq = pdev->irq;
+ dev->netdev_ops = &velocity_netdev_ops;
+ dev->ethtool_ops = &velocity_ethtool_ops;
+ netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
+
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX;
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
+ NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
+
+ ret = register_netdev(dev);
+ if (ret < 0)
+ goto err_iounmap;
+
+ if (!velocity_get_link(dev)) {
+ netif_carrier_off(dev);
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ }
+
+ velocity_print_info(vptr);
+ pci_set_drvdata(pdev, dev);
+
+ /* and leave the chip powered down */
+
+ pci_set_power_state(pdev, PCI_D3hot);
+ velocity_nics++;
+out:
+ return ret;
+
+err_iounmap:
+ iounmap(regs);
+err_release_res:
+ pci_release_regions(pdev);
+err_disable:
+ pci_disable_device(pdev);
+err_free_dev:
+ free_netdev(dev);
+ goto out;
+}
+
+#ifdef CONFIG_PM
+/**
+ * wol_calc_crc - WOL CRC
+ * @pattern: data pattern
+ * @mask_pattern: mask
+ *
+ * Compute the wake on lan crc hashes for the packet header
+ * we are interested in.
+ */
+static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
+{
+ u16 crc = 0xFFFF;
+ u8 mask;
+ int i, j;
+
+ for (i = 0; i < size; i++) {
+ mask = mask_pattern[i];
+
+ /* Skip this loop if the mask equals to zero */
+ if (mask == 0x00)
+ continue;
+
+ for (j = 0; j < 8; j++) {
+ if ((mask & 0x01) == 0) {
+ mask >>= 1;
+ continue;
+ }
+ mask >>= 1;
+ crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
+ }
+ }
+ /* Finally, invert the result once to get the correct data */
+ crc = ~crc;
+ return bitrev32(crc) >> 16;
+}
+
+/**
+ * velocity_set_wol - set up for wake on lan
+ * @vptr: velocity to set WOL status on
+ *
+ * Set a card up for wake on lan either by unicast or by
+ * ARP packet.
+ *
+ * FIXME: check static buffer is safe here
+ */
+static int velocity_set_wol(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ enum speed_opt spd_dpx = vptr->options.spd_dpx;
+ static u8 buf[256];
+ int i;
+
+ static u32 mask_pattern[2][4] = {
+ {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
+ {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
+ };
+
+ writew(0xFFFF, ®s->WOLCRClr);
+ writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet);
+ writew(WOLCR_MAGIC_EN, ®s->WOLCRSet);
+
+ /*
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet);
+ */
+
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ writew(WOLCR_UNICAST_EN, ®s->WOLCRSet);
+
+ if (vptr->wol_opts & VELOCITY_WOL_ARP) {
+ struct arp_packet *arp = (struct arp_packet *) buf;
+ u16 crc;
+ memset(buf, 0, sizeof(struct arp_packet) + 7);
+
+ for (i = 0; i < 4; i++)
+ writel(mask_pattern[0][i], ®s->ByteMask[0][i]);
+
+ arp->type = htons(ETH_P_ARP);
+ arp->ar_op = htons(1);
+
+ memcpy(arp->ar_tip, vptr->ip_addr, 4);
+
+ crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
+ (u8 *) & mask_pattern[0][0]);
+
+ writew(crc, ®s->PatternCRC[0]);
+ writew(WOLCR_ARP_EN, ®s->WOLCRSet);
+ }
+
+ BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet);
+ BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet);
+
+ writew(0x0FFF, ®s->WOLSRClr);
+
+ if (spd_dpx == SPD_DPX_1000_FULL)
+ goto mac_done;
+
+ if (spd_dpx != SPD_DPX_AUTO)
+ goto advertise_done;
+
+ if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+ MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+ }
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+
+advertise_done:
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
+
+ {
+ u8 GCR;
+ GCR = readb(®s->CHIPGCR);
+ GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
+ writeb(GCR, ®s->CHIPGCR);
+ }
+
+mac_done:
+ BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR);
+ /* Turn on SWPTAG just before entering power mode */
+ BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW);
+ /* Go to bed ..... */
+ BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
+
+ return 0;
+}
+
+/**
+ * velocity_save_context - save registers
+ * @vptr: velocity
+ * @context: buffer for stored context
+ *
+ * Retrieve the current configuration from the velocity hardware
+ * and stash it in the context structure, for use by the context
+ * restore functions. This allows us to save things we need across
+ * power down states
+ */
+static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+}
+
+static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+ unsigned long flags;
+
+ if (!netif_running(vptr->dev))
+ return 0;
+
+ netif_device_detach(vptr->dev);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ pci_save_state(pdev);
+
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
+ velocity_get_ip(vptr);
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ velocity_set_wol(vptr);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_set_power_state(pdev, PCI_D3hot);
+ } else {
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ }
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ return 0;
+}
+
+/**
+ * velocity_restore_context - restore registers
+ * @vptr: velocity
+ * @context: buffer for stored context
+ *
+ * Reload the register configuration from the velocity context
+ * created by velocity_save_context.
+ */
+static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ /* Just skip cr0 */
+ for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
+ /* Clear */
+ writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
+ /* Set */
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+ }
+
+ for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+}
+
+static int velocity_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+ unsigned long flags;
+ int i;
+
+ if (!netif_running(vptr->dev))
+ return 0;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, 0, 0);
+ pci_restore_state(pdev);
+
+ mac_wol_reset(vptr->mac_regs);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ velocity_restore_context(vptr, &vptr->context);
+ velocity_init_registers(vptr, VELOCITY_INIT_WOL);
+ mac_disable_int(vptr->mac_regs);
+
+ velocity_tx_srv(vptr);
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ if (vptr->tx.used[i])
+ mac_tx_queue_wake(vptr->mac_regs, i);
+ }
+
+ mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ netif_device_attach(vptr->dev);
+
+ return 0;
+}
+#endif
+
+/*
+ * Definition for our device driver. The PCI layer interface
+ * uses this to handle all our card discover and plugging
+ */
+static struct pci_driver velocity_driver = {
+ .name = VELOCITY_NAME,
+ .id_table = velocity_id_table,
+ .probe = velocity_found1,
+ .remove = __devexit_p(velocity_remove1),
+#ifdef CONFIG_PM
+ .suspend = velocity_suspend,
+ .resume = velocity_resume,
+#endif
+};
+
+
+/**
+ * velocity_ethtool_up - pre hook for ethtool
+ * @dev: network device
+ *
+ * Called before an ethtool operation. We need to make sure the
+ * chip is out of D3 state before we poke at it.
+ */
+static int velocity_ethtool_up(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D0);
+ return 0;
+}
+
+/**
+ * velocity_ethtool_down - post hook for ethtool
+ * @dev: network device
+ *
+ * Called after an ethtool operation. Restore the chip back to D3
+ * state if it isn't running.
+ */
+static void velocity_ethtool_down(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+}
+
+static int velocity_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u32 status;
+ status = check_connection_type(vptr->mac_regs);
+
+ cmd->supported = SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+
+ cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ cmd->advertising |=
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full;
+ } else {
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_1000_FULL:
+ cmd->advertising |= ADVERTISED_1000baseT_Full;
+ break;
+ case SPD_DPX_100_HALF:
+ cmd->advertising |= ADVERTISED_100baseT_Half;
+ break;
+ case SPD_DPX_100_FULL:
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+ break;
+ case SPD_DPX_10_HALF:
+ cmd->advertising |= ADVERTISED_10baseT_Half;
+ break;
+ case SPD_DPX_10_FULL:
+ cmd->advertising |= ADVERTISED_10baseT_Full;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (status & VELOCITY_SPEED_1000)
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
+ else if (status & VELOCITY_SPEED_100)
+ ethtool_cmd_speed_set(cmd, SPEED_100);
+ else
+ ethtool_cmd_speed_set(cmd, SPEED_10);
+
+ cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ cmd->port = PORT_TP;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->phy_address = readb(®s->MIIADR) & 0x1F;
+
+ if (status & VELOCITY_DUPLEX_FULL)
+ cmd->duplex = DUPLEX_FULL;
+ else
+ cmd->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int velocity_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
+ u32 curr_status;
+ u32 new_status = 0;
+ int ret = 0;
+
+ curr_status = check_connection_type(vptr->mac_regs);
+ curr_status &= (~VELOCITY_LINK_FAIL);
+
+ new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
+ new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
+ new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
+ new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
+ new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
+
+ if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
+ (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) {
+ ret = -EINVAL;
+ } else {
+ enum speed_opt spd_dpx;
+
+ if (new_status & VELOCITY_AUTONEG_ENABLE)
+ spd_dpx = SPD_DPX_AUTO;
+ else if ((new_status & VELOCITY_SPEED_1000) &&
+ (new_status & VELOCITY_DUPLEX_FULL)) {
+ spd_dpx = SPD_DPX_1000_FULL;
+ } else if (new_status & VELOCITY_SPEED_100)
+ spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+ SPD_DPX_100_FULL : SPD_DPX_100_HALF;
+ else if (new_status & VELOCITY_SPEED_10)
+ spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+ SPD_DPX_10_FULL : SPD_DPX_10_HALF;
+ else
+ return -EOPNOTSUPP;
+
+ vptr->options.spd_dpx = spd_dpx;
+
+ velocity_set_media_mode(vptr, new_status);
+ }
+
+ return ret;
+}
+
+static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ strcpy(info->driver, VELOCITY_NAME);
+ strcpy(info->version, VELOCITY_VERSION);
+ strcpy(info->bus_info, pci_name(vptr->pdev));
+}
+
+static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
+ wol->wolopts |= WAKE_MAGIC;
+ /*
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ wol.wolopts|=WAKE_PHY;
+ */
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ wol->wolopts |= WAKE_UCAST;
+ if (vptr->wol_opts & VELOCITY_WOL_ARP)
+ wol->wolopts |= WAKE_ARP;
+ memcpy(&wol->sopass, vptr->wol_passwd, 6);
+}
+
+static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
+ return -EFAULT;
+ vptr->wol_opts = VELOCITY_WOL_MAGIC;
+
+ /*
+ if (wol.wolopts & WAKE_PHY) {
+ vptr->wol_opts|=VELOCITY_WOL_PHY;
+ vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ */
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ vptr->wol_opts |= VELOCITY_WOL_MAGIC;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ if (wol->wolopts & WAKE_UCAST) {
+ vptr->wol_opts |= VELOCITY_WOL_UCAST;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ if (wol->wolopts & WAKE_ARP) {
+ vptr->wol_opts |= VELOCITY_WOL_ARP;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ memcpy(vptr->wol_passwd, wol->sopass, 6);
+ return 0;
+}
+
+static u32 velocity_get_msglevel(struct net_device *dev)
+{
+ return msglevel;
+}
+
+static void velocity_set_msglevel(struct net_device *dev, u32 value)
+{
+ msglevel = value;
+}
+
+static int get_pending_timer_val(int val)
+{
+ int mult_bits = val >> 6;
+ int mult = 1;
+
+ switch (mult_bits)
+ {
+ case 1:
+ mult = 4; break;
+ case 2:
+ mult = 16; break;
+ case 3:
+ mult = 64; break;
+ case 0:
+ default:
+ break;
+ }
+
+ return (val & 0x3f) * mult;
+}
+
+static void set_pending_timer_val(int *val, u32 us)
+{
+ u8 mult = 0;
+ u8 shift = 0;
+
+ if (us >= 0x3f) {
+ mult = 1; /* mult with 4 */
+ shift = 2;
+ }
+ if (us >= 0x3f * 4) {
+ mult = 2; /* mult with 16 */
+ shift = 4;
+ }
+ if (us >= 0x3f * 16) {
+ mult = 3; /* mult with 64 */
+ shift = 6;
+ }
+
+ *val = (mult << 6) | ((us >> shift) & 0x3f);
+}
+
+
+static int velocity_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup;
+ ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup;
+
+ ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer);
+ ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer);
+
+ return 0;
+}
+
+static int velocity_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int max_us = 0x3f * 64;
+ unsigned long flags;
+
+ /* 6 bits of */
+ if (ecmd->tx_coalesce_usecs > max_us)
+ return -EINVAL;
+ if (ecmd->rx_coalesce_usecs > max_us)
+ return -EINVAL;
+
+ if (ecmd->tx_max_coalesced_frames > 0xff)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames > 0xff)
+ return -EINVAL;
+
+ vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames;
+ vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames;
+
+ set_pending_timer_val(&vptr->options.rxqueue_timer,
+ ecmd->rx_coalesce_usecs);
+ set_pending_timer_val(&vptr->options.txqueue_timer,
+ ecmd->tx_coalesce_usecs);
+
+ /* Setup the interrupt suppression and queue timers */
+ spin_lock_irqsave(&vptr->lock, flags);
+ mac_disable_int(vptr->mac_regs);
+ setup_adaptive_interrupts(vptr);
+ setup_queue_timers(vptr);
+
+ mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
+ mac_clear_isr(vptr->mac_regs);
+ mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ return 0;
+}
+
+static const char velocity_gstrings[][ETH_GSTRING_LEN] = {
+ "rx_all",
+ "rx_ok",
+ "tx_ok",
+ "rx_error",
+ "rx_runt_ok",
+ "rx_runt_err",
+ "rx_64",
+ "tx_64",
+ "rx_65_to_127",
+ "tx_65_to_127",
+ "rx_128_to_255",
+ "tx_128_to_255",
+ "rx_256_to_511",
+ "tx_256_to_511",
+ "rx_512_to_1023",
+ "tx_512_to_1023",
+ "rx_1024_to_1518",
+ "tx_1024_to_1518",
+ "tx_ether_collisions",
+ "rx_crc_errors",
+ "rx_jumbo",
+ "tx_jumbo",
+ "rx_mac_control_frames",
+ "tx_mac_control_frames",
+ "rx_frame_alignement_errors",
+ "rx_long_ok",
+ "rx_long_err",
+ "tx_sqe_errors",
+ "rx_no_buf",
+ "rx_symbol_errors",
+ "in_range_length_errors",
+ "late_collisions"
+};
+
+static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings));
+ break;
+ }
+}
+
+static int velocity_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(velocity_gstrings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void velocity_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ if (netif_running(dev)) {
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 *p = vptr->mib_counter;
+ int i;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++)
+ *data++ = *p++;
+ }
+}
+
+static const struct ethtool_ops velocity_ethtool_ops = {
+ .get_settings = velocity_get_settings,
+ .set_settings = velocity_set_settings,
+ .get_drvinfo = velocity_get_drvinfo,
+ .get_wol = velocity_ethtool_get_wol,
+ .set_wol = velocity_ethtool_set_wol,
+ .get_msglevel = velocity_get_msglevel,
+ .set_msglevel = velocity_set_msglevel,
+ .get_link = velocity_get_link,
+ .get_strings = velocity_get_strings,
+ .get_sset_count = velocity_get_sset_count,
+ .get_ethtool_stats = velocity_get_ethtool_stats,
+ .get_coalesce = velocity_get_coalesce,
+ .set_coalesce = velocity_set_coalesce,
+ .begin = velocity_ethtool_up,
+ .complete = velocity_ethtool_down
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
+{
+ struct in_ifaddr *ifa = ptr;
+ struct net_device *dev = ifa->ifa_dev->dev;
+
+ if (dev_net(dev) == &init_net &&
+ dev->netdev_ops == &velocity_netdev_ops)
+ velocity_get_ip(netdev_priv(dev));
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block velocity_inetaddr_notifier = {
+ .notifier_call = velocity_netdev_event,
+};
+
+static void velocity_register_notifier(void)
+{
+ register_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+static void velocity_unregister_notifier(void)
+{
+ unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+#else
+
+#define velocity_register_notifier() do {} while (0)
+#define velocity_unregister_notifier() do {} while (0)
+
+#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
+
+/**
+ * velocity_init_module - load time function
+ *
+ * Called when the velocity module is loaded. The PCI driver
+ * is registered with the PCI layer, and in turn will call
+ * the probe functions for each velocity adapter installed
+ * in the system.
+ */
+static int __init velocity_init_module(void)
+{
+ int ret;
+
+ velocity_register_notifier();
+ ret = pci_register_driver(&velocity_driver);
+ if (ret < 0)
+ velocity_unregister_notifier();
+ return ret;
+}
+
+/**
+ * velocity_cleanup - module unload
+ *
+ * When the velocity hardware is unloaded this function is called.
+ * It will clean up the notifiers and the unregister the PCI
+ * driver interface for this hardware. This in turn cleans up
+ * all discovered interfaces before returning from the function
+ */
+static void __exit velocity_cleanup_module(void)
+{
+ velocity_unregister_notifier();
+ pci_unregister_driver(&velocity_driver);
+}
+
+module_init(velocity_init_module);
+module_exit(velocity_cleanup_module);
diff --git a/drivers/net/ethernet/via/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h
new file mode 100644
index 000000000000..4cb9f13485e9
--- /dev/null
+++ b/drivers/net/ethernet/via/via-velocity.h
@@ -0,0 +1,1579 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This software may be redistributed and/or modified under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * File: via-velocity.h
+ *
+ * Purpose: Header file to define driver's private structures.
+ *
+ * Author: Chuang Liang-Shing, AJ Jiang
+ *
+ * Date: Jan 24, 2003
+ */
+
+
+#ifndef VELOCITY_H
+#define VELOCITY_H
+
+#define VELOCITY_TX_CSUM_SUPPORT
+
+#define VELOCITY_NAME "via-velocity"
+#define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"
+#define VELOCITY_VERSION "1.15"
+
+#define VELOCITY_IO_SIZE 256
+#define VELOCITY_NAPI_WEIGHT 64
+
+#define PKT_BUF_SZ 1540
+
+#define MAX_UNITS 8
+#define OPTION_DEFAULT { [0 ... MAX_UNITS-1] = -1}
+
+#define REV_ID_VT6110 (0)
+
+#define BYTE_REG_BITS_ON(x,p) do { writeb(readb((p))|(x),(p));} while (0)
+#define WORD_REG_BITS_ON(x,p) do { writew(readw((p))|(x),(p));} while (0)
+#define DWORD_REG_BITS_ON(x,p) do { writel(readl((p))|(x),(p));} while (0)
+
+#define BYTE_REG_BITS_IS_ON(x,p) (readb((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x,p) (readw((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x,p) (readl((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x,p) do { writeb(readb((p)) & (~(x)),(p));} while (0)
+#define WORD_REG_BITS_OFF(x,p) do { writew(readw((p)) & (~(x)),(p));} while (0)
+#define DWORD_REG_BITS_OFF(x,p) do { writel(readl((p)) & (~(x)),(p));} while (0)
+
+#define BYTE_REG_BITS_SET(x,m,p) do { writeb( (readb((p)) & (~(m))) |(x),(p));} while (0)
+#define WORD_REG_BITS_SET(x,m,p) do { writew( (readw((p)) & (~(m))) |(x),(p));} while (0)
+#define DWORD_REG_BITS_SET(x,m,p) do { writel( (readl((p)) & (~(m)))|(x),(p));} while (0)
+
+#define VAR_USED(p) do {(p)=(p);} while (0)
+
+/*
+ * Purpose: Structures for MAX RX/TX descriptors.
+ */
+
+
+#define B_OWNED_BY_CHIP 1
+#define B_OWNED_BY_HOST 0
+
+/*
+ * Bits in the RSR0 register
+ */
+
+#define RSR_DETAG cpu_to_le16(0x0080)
+#define RSR_SNTAG cpu_to_le16(0x0040)
+#define RSR_RXER cpu_to_le16(0x0020)
+#define RSR_RL cpu_to_le16(0x0010)
+#define RSR_CE cpu_to_le16(0x0008)
+#define RSR_FAE cpu_to_le16(0x0004)
+#define RSR_CRC cpu_to_le16(0x0002)
+#define RSR_VIDM cpu_to_le16(0x0001)
+
+/*
+ * Bits in the RSR1 register
+ */
+
+#define RSR_RXOK cpu_to_le16(0x8000) // rx OK
+#define RSR_PFT cpu_to_le16(0x4000) // Perfect filtering address match
+#define RSR_MAR cpu_to_le16(0x2000) // MAC accept multicast address packet
+#define RSR_BAR cpu_to_le16(0x1000) // MAC accept broadcast address packet
+#define RSR_PHY cpu_to_le16(0x0800) // MAC accept physical address packet
+#define RSR_VTAG cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator
+#define RSR_STP cpu_to_le16(0x0200) // start of packet
+#define RSR_EDP cpu_to_le16(0x0100) // end of packet
+
+/*
+ * Bits in the CSM register
+ */
+
+#define CSM_IPOK 0x40 //IP Checksum validation ok
+#define CSM_TUPOK 0x20 //TCP/UDP Checksum validation ok
+#define CSM_FRAG 0x10 //Fragment IP datagram
+#define CSM_IPKT 0x04 //Received an IP packet
+#define CSM_TCPKT 0x02 //Received a TCP packet
+#define CSM_UDPKT 0x01 //Received a UDP packet
+
+/*
+ * Bits in the TSR0 register
+ */
+
+#define TSR0_ABT cpu_to_le16(0x0080) // Tx abort because of excessive collision
+#define TSR0_OWT cpu_to_le16(0x0040) // Jumbo frame Tx abort
+#define TSR0_OWC cpu_to_le16(0x0020) // Out of window collision
+#define TSR0_COLS cpu_to_le16(0x0010) // experience collision in this transmit event
+#define TSR0_NCR3 cpu_to_le16(0x0008) // collision retry counter[3]
+#define TSR0_NCR2 cpu_to_le16(0x0004) // collision retry counter[2]
+#define TSR0_NCR1 cpu_to_le16(0x0002) // collision retry counter[1]
+#define TSR0_NCR0 cpu_to_le16(0x0001) // collision retry counter[0]
+#define TSR0_TERR cpu_to_le16(0x8000) //
+#define TSR0_FDX cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode
+#define TSR0_GMII cpu_to_le16(0x2000) // current transaction is serviced by GMII mode
+#define TSR0_LNKFL cpu_to_le16(0x1000) // packet serviced during link down
+#define TSR0_SHDN cpu_to_le16(0x0400) // shutdown case
+#define TSR0_CRS cpu_to_le16(0x0200) // carrier sense lost
+#define TSR0_CDH cpu_to_le16(0x0100) // AQE test fail (CD heartbeat)
+
+//
+// Bits in the TCR0 register
+//
+#define TCR0_TIC 0x80 // assert interrupt immediately while descriptor has been send complete
+#define TCR0_PIC 0x40 // priority interrupt request, INA# is issued over adaptive interrupt scheme
+#define TCR0_VETAG 0x20 // enable VLAN tag
+#define TCR0_IPCK 0x10 // request IP checksum calculation.
+#define TCR0_UDPCK 0x08 // request UDP checksum calculation.
+#define TCR0_TCPCK 0x04 // request TCP checksum calculation.
+#define TCR0_JMBO 0x02 // indicate a jumbo packet in GMAC side
+#define TCR0_CRC 0x01 // disable CRC generation
+
+#define TCPLS_NORMAL 3
+#define TCPLS_START 2
+#define TCPLS_END 1
+#define TCPLS_MED 0
+
+
+// max transmit or receive buffer size
+#define CB_RX_BUF_SIZE 2048UL // max buffer size
+ // NOTE: must be multiple of 4
+
+#define CB_MAX_RD_NUM 512 // MAX # of RD
+#define CB_MAX_TD_NUM 256 // MAX # of TD
+
+#define CB_INIT_RD_NUM_3119 128 // init # of RD, for setup VT3119
+#define CB_INIT_TD_NUM_3119 64 // init # of TD, for setup VT3119
+
+#define CB_INIT_RD_NUM 128 // init # of RD, for setup default
+#define CB_INIT_TD_NUM 64 // init # of TD, for setup default
+
+// for 3119
+#define CB_TD_RING_NUM 4 // # of TD rings.
+#define CB_MAX_SEG_PER_PKT 7 // max data seg per packet (Tx)
+
+
+/*
+ * If collisions excess 15 times , tx will abort, and
+ * if tx fifo underflow, tx will fail
+ * we should try to resend it
+ */
+
+#define CB_MAX_TX_ABORT_RETRY 3
+
+/*
+ * Receive descriptor
+ */
+
+struct rdesc0 {
+ __le16 RSR; /* Receive status */
+ __le16 len; /* bits 0--13; bit 15 - owner */
+};
+
+struct rdesc1 {
+ __le16 PQTAG;
+ u8 CSM;
+ u8 IPKT;
+};
+
+enum {
+ RX_INTEN = cpu_to_le16(0x8000)
+};
+
+struct rx_desc {
+ struct rdesc0 rdesc0;
+ struct rdesc1 rdesc1;
+ __le32 pa_low; /* Low 32 bit PCI address */
+ __le16 pa_high; /* Next 16 bit PCI address (48 total) */
+ __le16 size; /* bits 0--14 - frame size, bit 15 - enable int. */
+} __packed;
+
+/*
+ * Transmit descriptor
+ */
+
+struct tdesc0 {
+ __le16 TSR; /* Transmit status register */
+ __le16 len; /* bits 0--13 - size of frame, bit 15 - owner */
+};
+
+struct tdesc1 {
+ __le16 vlan;
+ u8 TCR;
+ u8 cmd; /* bits 0--1 - TCPLS, bits 4--7 - CMDZ */
+} __packed;
+
+enum {
+ TD_QUEUE = cpu_to_le16(0x8000)
+};
+
+struct td_buf {
+ __le32 pa_low;
+ __le16 pa_high;
+ __le16 size; /* bits 0--13 - size, bit 15 - queue */
+} __packed;
+
+struct tx_desc {
+ struct tdesc0 tdesc0;
+ struct tdesc1 tdesc1;
+ struct td_buf td_buf[7];
+};
+
+struct velocity_rd_info {
+ struct sk_buff *skb;
+ dma_addr_t skb_dma;
+};
+
+/*
+ * Used to track transmit side buffers.
+ */
+
+struct velocity_td_info {
+ struct sk_buff *skb;
+ int nskb_dma;
+ dma_addr_t skb_dma[7];
+};
+
+enum velocity_owner {
+ OWNED_BY_HOST = 0,
+ OWNED_BY_NIC = cpu_to_le16(0x8000)
+};
+
+
+/*
+ * MAC registers and macros.
+ */
+
+
+#define MCAM_SIZE 64
+#define VCAM_SIZE 64
+#define TX_QUEUE_NO 4
+
+#define MAX_HW_MIB_COUNTER 32
+#define VELOCITY_MIN_MTU (64)
+#define VELOCITY_MAX_MTU (9000)
+
+/*
+ * Registers in the MAC
+ */
+
+#define MAC_REG_PAR 0x00 // physical address
+#define MAC_REG_RCR 0x06
+#define MAC_REG_TCR 0x07
+#define MAC_REG_CR0_SET 0x08
+#define MAC_REG_CR1_SET 0x09
+#define MAC_REG_CR2_SET 0x0A
+#define MAC_REG_CR3_SET 0x0B
+#define MAC_REG_CR0_CLR 0x0C
+#define MAC_REG_CR1_CLR 0x0D
+#define MAC_REG_CR2_CLR 0x0E
+#define MAC_REG_CR3_CLR 0x0F
+#define MAC_REG_MAR 0x10
+#define MAC_REG_CAM 0x10
+#define MAC_REG_DEC_BASE_HI 0x18
+#define MAC_REG_DBF_BASE_HI 0x1C
+#define MAC_REG_ISR_CTL 0x20
+#define MAC_REG_ISR_HOTMR 0x20
+#define MAC_REG_ISR_TSUPTHR 0x20
+#define MAC_REG_ISR_RSUPTHR 0x20
+#define MAC_REG_ISR_CTL1 0x21
+#define MAC_REG_TXE_SR 0x22
+#define MAC_REG_RXE_SR 0x23
+#define MAC_REG_ISR 0x24
+#define MAC_REG_ISR0 0x24
+#define MAC_REG_ISR1 0x25
+#define MAC_REG_ISR2 0x26
+#define MAC_REG_ISR3 0x27
+#define MAC_REG_IMR 0x28
+#define MAC_REG_IMR0 0x28
+#define MAC_REG_IMR1 0x29
+#define MAC_REG_IMR2 0x2A
+#define MAC_REG_IMR3 0x2B
+#define MAC_REG_TDCSR_SET 0x30
+#define MAC_REG_RDCSR_SET 0x32
+#define MAC_REG_TDCSR_CLR 0x34
+#define MAC_REG_RDCSR_CLR 0x36
+#define MAC_REG_RDBASE_LO 0x38
+#define MAC_REG_RDINDX 0x3C
+#define MAC_REG_TDBASE_LO 0x40
+#define MAC_REG_RDCSIZE 0x50
+#define MAC_REG_TDCSIZE 0x52
+#define MAC_REG_TDINDX 0x54
+#define MAC_REG_TDIDX0 0x54
+#define MAC_REG_TDIDX1 0x56
+#define MAC_REG_TDIDX2 0x58
+#define MAC_REG_TDIDX3 0x5A
+#define MAC_REG_PAUSE_TIMER 0x5C
+#define MAC_REG_RBRDU 0x5E
+#define MAC_REG_FIFO_TEST0 0x60
+#define MAC_REG_FIFO_TEST1 0x64
+#define MAC_REG_CAMADDR 0x68
+#define MAC_REG_CAMCR 0x69
+#define MAC_REG_GFTEST 0x6A
+#define MAC_REG_FTSTCMD 0x6B
+#define MAC_REG_MIICFG 0x6C
+#define MAC_REG_MIISR 0x6D
+#define MAC_REG_PHYSR0 0x6E
+#define MAC_REG_PHYSR1 0x6F
+#define MAC_REG_MIICR 0x70
+#define MAC_REG_MIIADR 0x71
+#define MAC_REG_MIIDATA 0x72
+#define MAC_REG_SOFT_TIMER0 0x74
+#define MAC_REG_SOFT_TIMER1 0x76
+#define MAC_REG_CFGA 0x78
+#define MAC_REG_CFGB 0x79
+#define MAC_REG_CFGC 0x7A
+#define MAC_REG_CFGD 0x7B
+#define MAC_REG_DCFG0 0x7C
+#define MAC_REG_DCFG1 0x7D
+#define MAC_REG_MCFG0 0x7E
+#define MAC_REG_MCFG1 0x7F
+
+#define MAC_REG_TBIST 0x80
+#define MAC_REG_RBIST 0x81
+#define MAC_REG_PMCC 0x82
+#define MAC_REG_STICKHW 0x83
+#define MAC_REG_MIBCR 0x84
+#define MAC_REG_EERSV 0x85
+#define MAC_REG_REVID 0x86
+#define MAC_REG_MIBREAD 0x88
+#define MAC_REG_BPMA 0x8C
+#define MAC_REG_EEWR_DATA 0x8C
+#define MAC_REG_BPMD_WR 0x8F
+#define MAC_REG_BPCMD 0x90
+#define MAC_REG_BPMD_RD 0x91
+#define MAC_REG_EECHKSUM 0x92
+#define MAC_REG_EECSR 0x93
+#define MAC_REG_EERD_DATA 0x94
+#define MAC_REG_EADDR 0x96
+#define MAC_REG_EMBCMD 0x97
+#define MAC_REG_JMPSR0 0x98
+#define MAC_REG_JMPSR1 0x99
+#define MAC_REG_JMPSR2 0x9A
+#define MAC_REG_JMPSR3 0x9B
+#define MAC_REG_CHIPGSR 0x9C
+#define MAC_REG_TESTCFG 0x9D
+#define MAC_REG_DEBUG 0x9E
+#define MAC_REG_CHIPGCR 0x9F /* Chip Operation and Diagnostic Control */
+#define MAC_REG_WOLCR0_SET 0xA0
+#define MAC_REG_WOLCR1_SET 0xA1
+#define MAC_REG_PWCFG_SET 0xA2
+#define MAC_REG_WOLCFG_SET 0xA3
+#define MAC_REG_WOLCR0_CLR 0xA4
+#define MAC_REG_WOLCR1_CLR 0xA5
+#define MAC_REG_PWCFG_CLR 0xA6
+#define MAC_REG_WOLCFG_CLR 0xA7
+#define MAC_REG_WOLSR0_SET 0xA8
+#define MAC_REG_WOLSR1_SET 0xA9
+#define MAC_REG_WOLSR0_CLR 0xAC
+#define MAC_REG_WOLSR1_CLR 0xAD
+#define MAC_REG_PATRN_CRC0 0xB0
+#define MAC_REG_PATRN_CRC1 0xB2
+#define MAC_REG_PATRN_CRC2 0xB4
+#define MAC_REG_PATRN_CRC3 0xB6
+#define MAC_REG_PATRN_CRC4 0xB8
+#define MAC_REG_PATRN_CRC5 0xBA
+#define MAC_REG_PATRN_CRC6 0xBC
+#define MAC_REG_PATRN_CRC7 0xBE
+#define MAC_REG_BYTEMSK0_0 0xC0
+#define MAC_REG_BYTEMSK0_1 0xC4
+#define MAC_REG_BYTEMSK0_2 0xC8
+#define MAC_REG_BYTEMSK0_3 0xCC
+#define MAC_REG_BYTEMSK1_0 0xD0
+#define MAC_REG_BYTEMSK1_1 0xD4
+#define MAC_REG_BYTEMSK1_2 0xD8
+#define MAC_REG_BYTEMSK1_3 0xDC
+#define MAC_REG_BYTEMSK2_0 0xE0
+#define MAC_REG_BYTEMSK2_1 0xE4
+#define MAC_REG_BYTEMSK2_2 0xE8
+#define MAC_REG_BYTEMSK2_3 0xEC
+#define MAC_REG_BYTEMSK3_0 0xF0
+#define MAC_REG_BYTEMSK3_1 0xF4
+#define MAC_REG_BYTEMSK3_2 0xF8
+#define MAC_REG_BYTEMSK3_3 0xFC
+
+/*
+ * Bits in the RCR register
+ */
+
+#define RCR_AS 0x80
+#define RCR_AP 0x40
+#define RCR_AL 0x20
+#define RCR_PROM 0x10
+#define RCR_AB 0x08
+#define RCR_AM 0x04
+#define RCR_AR 0x02
+#define RCR_SEP 0x01
+
+/*
+ * Bits in the TCR register
+ */
+
+#define TCR_TB2BDIS 0x80
+#define TCR_COLTMC1 0x08
+#define TCR_COLTMC0 0x04
+#define TCR_LB1 0x02 /* loopback[1] */
+#define TCR_LB0 0x01 /* loopback[0] */
+
+/*
+ * Bits in the CR0 register
+ */
+
+#define CR0_TXON 0x00000008UL
+#define CR0_RXON 0x00000004UL
+#define CR0_STOP 0x00000002UL /* stop MAC, default = 1 */
+#define CR0_STRT 0x00000001UL /* start MAC */
+#define CR0_SFRST 0x00008000UL /* software reset */
+#define CR0_TM1EN 0x00004000UL
+#define CR0_TM0EN 0x00002000UL
+#define CR0_DPOLL 0x00000800UL /* disable rx/tx auto polling */
+#define CR0_DISAU 0x00000100UL
+#define CR0_XONEN 0x00800000UL
+#define CR0_FDXTFCEN 0x00400000UL /* full-duplex TX flow control enable */
+#define CR0_FDXRFCEN 0x00200000UL /* full-duplex RX flow control enable */
+#define CR0_HDXFCEN 0x00100000UL /* half-duplex flow control enable */
+#define CR0_XHITH1 0x00080000UL /* TX XON high threshold 1 */
+#define CR0_XHITH0 0x00040000UL /* TX XON high threshold 0 */
+#define CR0_XLTH1 0x00020000UL /* TX pause frame low threshold 1 */
+#define CR0_XLTH0 0x00010000UL /* TX pause frame low threshold 0 */
+#define CR0_GSPRST 0x80000000UL
+#define CR0_FORSRST 0x40000000UL
+#define CR0_FPHYRST 0x20000000UL
+#define CR0_DIAG 0x10000000UL
+#define CR0_INTPCTL 0x04000000UL
+#define CR0_GINTMSK1 0x02000000UL
+#define CR0_GINTMSK0 0x01000000UL
+
+/*
+ * Bits in the CR1 register
+ */
+
+#define CR1_SFRST 0x80 /* software reset */
+#define CR1_TM1EN 0x40
+#define CR1_TM0EN 0x20
+#define CR1_DPOLL 0x08 /* disable rx/tx auto polling */
+#define CR1_DISAU 0x01
+
+/*
+ * Bits in the CR2 register
+ */
+
+#define CR2_XONEN 0x80
+#define CR2_FDXTFCEN 0x40 /* full-duplex TX flow control enable */
+#define CR2_FDXRFCEN 0x20 /* full-duplex RX flow control enable */
+#define CR2_HDXFCEN 0x10 /* half-duplex flow control enable */
+#define CR2_XHITH1 0x08 /* TX XON high threshold 1 */
+#define CR2_XHITH0 0x04 /* TX XON high threshold 0 */
+#define CR2_XLTH1 0x02 /* TX pause frame low threshold 1 */
+#define CR2_XLTH0 0x01 /* TX pause frame low threshold 0 */
+
+/*
+ * Bits in the CR3 register
+ */
+
+#define CR3_GSPRST 0x80
+#define CR3_FORSRST 0x40
+#define CR3_FPHYRST 0x20
+#define CR3_DIAG 0x10
+#define CR3_INTPCTL 0x04
+#define CR3_GINTMSK1 0x02
+#define CR3_GINTMSK0 0x01
+
+#define ISRCTL_UDPINT 0x8000
+#define ISRCTL_TSUPDIS 0x4000
+#define ISRCTL_RSUPDIS 0x2000
+#define ISRCTL_PMSK1 0x1000
+#define ISRCTL_PMSK0 0x0800
+#define ISRCTL_INTPD 0x0400
+#define ISRCTL_HCRLD 0x0200
+#define ISRCTL_SCRLD 0x0100
+
+/*
+ * Bits in the ISR_CTL1 register
+ */
+
+#define ISRCTL1_UDPINT 0x80
+#define ISRCTL1_TSUPDIS 0x40
+#define ISRCTL1_RSUPDIS 0x20
+#define ISRCTL1_PMSK1 0x10
+#define ISRCTL1_PMSK0 0x08
+#define ISRCTL1_INTPD 0x04
+#define ISRCTL1_HCRLD 0x02
+#define ISRCTL1_SCRLD 0x01
+
+/*
+ * Bits in the TXE_SR register
+ */
+
+#define TXESR_TFDBS 0x08
+#define TXESR_TDWBS 0x04
+#define TXESR_TDRBS 0x02
+#define TXESR_TDSTR 0x01
+
+/*
+ * Bits in the RXE_SR register
+ */
+
+#define RXESR_RFDBS 0x08
+#define RXESR_RDWBS 0x04
+#define RXESR_RDRBS 0x02
+#define RXESR_RDSTR 0x01
+
+/*
+ * Bits in the ISR register
+ */
+
+#define ISR_ISR3 0x80000000UL
+#define ISR_ISR2 0x40000000UL
+#define ISR_ISR1 0x20000000UL
+#define ISR_ISR0 0x10000000UL
+#define ISR_TXSTLI 0x02000000UL
+#define ISR_RXSTLI 0x01000000UL
+#define ISR_HFLD 0x00800000UL
+#define ISR_UDPI 0x00400000UL
+#define ISR_MIBFI 0x00200000UL
+#define ISR_SHDNI 0x00100000UL
+#define ISR_PHYI 0x00080000UL
+#define ISR_PWEI 0x00040000UL
+#define ISR_TMR1I 0x00020000UL
+#define ISR_TMR0I 0x00010000UL
+#define ISR_SRCI 0x00008000UL
+#define ISR_LSTPEI 0x00004000UL
+#define ISR_LSTEI 0x00002000UL
+#define ISR_OVFI 0x00001000UL
+#define ISR_FLONI 0x00000800UL
+#define ISR_RACEI 0x00000400UL
+#define ISR_TXWB1I 0x00000200UL
+#define ISR_TXWB0I 0x00000100UL
+#define ISR_PTX3I 0x00000080UL
+#define ISR_PTX2I 0x00000040UL
+#define ISR_PTX1I 0x00000020UL
+#define ISR_PTX0I 0x00000010UL
+#define ISR_PTXI 0x00000008UL
+#define ISR_PRXI 0x00000004UL
+#define ISR_PPTXI 0x00000002UL
+#define ISR_PPRXI 0x00000001UL
+
+/*
+ * Bits in the IMR register
+ */
+
+#define IMR_TXSTLM 0x02000000UL
+#define IMR_UDPIM 0x00400000UL
+#define IMR_MIBFIM 0x00200000UL
+#define IMR_SHDNIM 0x00100000UL
+#define IMR_PHYIM 0x00080000UL
+#define IMR_PWEIM 0x00040000UL
+#define IMR_TMR1IM 0x00020000UL
+#define IMR_TMR0IM 0x00010000UL
+
+#define IMR_SRCIM 0x00008000UL
+#define IMR_LSTPEIM 0x00004000UL
+#define IMR_LSTEIM 0x00002000UL
+#define IMR_OVFIM 0x00001000UL
+#define IMR_FLONIM 0x00000800UL
+#define IMR_RACEIM 0x00000400UL
+#define IMR_TXWB1IM 0x00000200UL
+#define IMR_TXWB0IM 0x00000100UL
+
+#define IMR_PTX3IM 0x00000080UL
+#define IMR_PTX2IM 0x00000040UL
+#define IMR_PTX1IM 0x00000020UL
+#define IMR_PTX0IM 0x00000010UL
+#define IMR_PTXIM 0x00000008UL
+#define IMR_PRXIM 0x00000004UL
+#define IMR_PPTXIM 0x00000002UL
+#define IMR_PPRXIM 0x00000001UL
+
+/* 0x0013FB0FUL = initial value of IMR */
+
+#define INT_MASK_DEF (IMR_PPTXIM|IMR_PPRXIM|IMR_PTXIM|IMR_PRXIM|\
+ IMR_PWEIM|IMR_TXWB0IM|IMR_TXWB1IM|IMR_FLONIM|\
+ IMR_OVFIM|IMR_LSTEIM|IMR_LSTPEIM|IMR_SRCIM|IMR_MIBFIM|\
+ IMR_SHDNIM|IMR_TMR1IM|IMR_TMR0IM|IMR_TXSTLM)
+
+/*
+ * Bits in the TDCSR0/1, RDCSR0 register
+ */
+
+#define TRDCSR_DEAD 0x0008
+#define TRDCSR_WAK 0x0004
+#define TRDCSR_ACT 0x0002
+#define TRDCSR_RUN 0x0001
+
+/*
+ * Bits in the CAMADDR register
+ */
+
+#define CAMADDR_CAMEN 0x80
+#define CAMADDR_VCAMSL 0x40
+
+/*
+ * Bits in the CAMCR register
+ */
+
+#define CAMCR_PS1 0x80
+#define CAMCR_PS0 0x40
+#define CAMCR_AITRPKT 0x20
+#define CAMCR_AITR16 0x10
+#define CAMCR_CAMRD 0x08
+#define CAMCR_CAMWR 0x04
+#define CAMCR_PS_CAM_MASK 0x40
+#define CAMCR_PS_CAM_DATA 0x80
+#define CAMCR_PS_MAR 0x00
+
+/*
+ * Bits in the MIICFG register
+ */
+
+#define MIICFG_MPO1 0x80
+#define MIICFG_MPO0 0x40
+#define MIICFG_MFDC 0x20
+
+/*
+ * Bits in the MIISR register
+ */
+
+#define MIISR_MIDLE 0x80
+
+/*
+ * Bits in the PHYSR0 register
+ */
+
+#define PHYSR0_PHYRST 0x80
+#define PHYSR0_LINKGD 0x40
+#define PHYSR0_FDPX 0x10
+#define PHYSR0_SPDG 0x08
+#define PHYSR0_SPD10 0x04
+#define PHYSR0_RXFLC 0x02
+#define PHYSR0_TXFLC 0x01
+
+/*
+ * Bits in the PHYSR1 register
+ */
+
+#define PHYSR1_PHYTBI 0x01
+
+/*
+ * Bits in the MIICR register
+ */
+
+#define MIICR_MAUTO 0x80
+#define MIICR_RCMD 0x40
+#define MIICR_WCMD 0x20
+#define MIICR_MDPM 0x10
+#define MIICR_MOUT 0x08
+#define MIICR_MDO 0x04
+#define MIICR_MDI 0x02
+#define MIICR_MDC 0x01
+
+/*
+ * Bits in the MIIADR register
+ */
+
+#define MIIADR_SWMPL 0x80
+
+/*
+ * Bits in the CFGA register
+ */
+
+#define CFGA_PMHCTG 0x08
+#define CFGA_GPIO1PD 0x04
+#define CFGA_ABSHDN 0x02
+#define CFGA_PACPI 0x01
+
+/*
+ * Bits in the CFGB register
+ */
+
+#define CFGB_GTCKOPT 0x80
+#define CFGB_MIIOPT 0x40
+#define CFGB_CRSEOPT 0x20
+#define CFGB_OFSET 0x10
+#define CFGB_CRANDOM 0x08
+#define CFGB_CAP 0x04
+#define CFGB_MBA 0x02
+#define CFGB_BAKOPT 0x01
+
+/*
+ * Bits in the CFGC register
+ */
+
+#define CFGC_EELOAD 0x80
+#define CFGC_BROPT 0x40
+#define CFGC_DLYEN 0x20
+#define CFGC_DTSEL 0x10
+#define CFGC_BTSEL 0x08
+#define CFGC_BPS2 0x04 /* bootrom select[2] */
+#define CFGC_BPS1 0x02 /* bootrom select[1] */
+#define CFGC_BPS0 0x01 /* bootrom select[0] */
+
+/*
+ * Bits in the CFGD register
+ */
+
+#define CFGD_IODIS 0x80
+#define CFGD_MSLVDACEN 0x40
+#define CFGD_CFGDACEN 0x20
+#define CFGD_PCI64EN 0x10
+#define CFGD_HTMRL4 0x08
+
+/*
+ * Bits in the DCFG1 register
+ */
+
+#define DCFG_XMWI 0x8000
+#define DCFG_XMRM 0x4000
+#define DCFG_XMRL 0x2000
+#define DCFG_PERDIS 0x1000
+#define DCFG_MRWAIT 0x0400
+#define DCFG_MWWAIT 0x0200
+#define DCFG_LATMEN 0x0100
+
+/*
+ * Bits in the MCFG0 register
+ */
+
+#define MCFG_RXARB 0x0080
+#define MCFG_RFT1 0x0020
+#define MCFG_RFT0 0x0010
+#define MCFG_LOWTHOPT 0x0008
+#define MCFG_PQEN 0x0004
+#define MCFG_RTGOPT 0x0002
+#define MCFG_VIDFR 0x0001
+
+/*
+ * Bits in the MCFG1 register
+ */
+
+#define MCFG_TXARB 0x8000
+#define MCFG_TXQBK1 0x0800
+#define MCFG_TXQBK0 0x0400
+#define MCFG_TXQNOBK 0x0200
+#define MCFG_SNAPOPT 0x0100
+
+/*
+ * Bits in the PMCC register
+ */
+
+#define PMCC_DSI 0x80
+#define PMCC_D2_DIS 0x40
+#define PMCC_D1_DIS 0x20
+#define PMCC_D3C_EN 0x10
+#define PMCC_D3H_EN 0x08
+#define PMCC_D2_EN 0x04
+#define PMCC_D1_EN 0x02
+#define PMCC_D0_EN 0x01
+
+/*
+ * Bits in STICKHW
+ */
+
+#define STICKHW_SWPTAG 0x10
+#define STICKHW_WOLSR 0x08
+#define STICKHW_WOLEN 0x04
+#define STICKHW_DS1 0x02 /* R/W by software/cfg cycle */
+#define STICKHW_DS0 0x01 /* suspend well DS write port */
+
+/*
+ * Bits in the MIBCR register
+ */
+
+#define MIBCR_MIBISTOK 0x80
+#define MIBCR_MIBISTGO 0x40
+#define MIBCR_MIBINC 0x20
+#define MIBCR_MIBHI 0x10
+#define MIBCR_MIBFRZ 0x08
+#define MIBCR_MIBFLSH 0x04
+#define MIBCR_MPTRINI 0x02
+#define MIBCR_MIBCLR 0x01
+
+/*
+ * Bits in the EERSV register
+ */
+
+#define EERSV_BOOT_RPL ((u8) 0x01) /* Boot method selection for VT6110 */
+
+#define EERSV_BOOT_MASK ((u8) 0x06)
+#define EERSV_BOOT_INT19 ((u8) 0x00)
+#define EERSV_BOOT_INT18 ((u8) 0x02)
+#define EERSV_BOOT_LOCAL ((u8) 0x04)
+#define EERSV_BOOT_BEV ((u8) 0x06)
+
+
+/*
+ * Bits in BPCMD
+ */
+
+#define BPCMD_BPDNE 0x80
+#define BPCMD_EBPWR 0x02
+#define BPCMD_EBPRD 0x01
+
+/*
+ * Bits in the EECSR register
+ */
+
+#define EECSR_EMBP 0x40 /* eeprom embedded programming */
+#define EECSR_RELOAD 0x20 /* eeprom content reload */
+#define EECSR_DPM 0x10 /* eeprom direct programming */
+#define EECSR_ECS 0x08 /* eeprom CS pin */
+#define EECSR_ECK 0x04 /* eeprom CK pin */
+#define EECSR_EDI 0x02 /* eeprom DI pin */
+#define EECSR_EDO 0x01 /* eeprom DO pin */
+
+/*
+ * Bits in the EMBCMD register
+ */
+
+#define EMBCMD_EDONE 0x80
+#define EMBCMD_EWDIS 0x08
+#define EMBCMD_EWEN 0x04
+#define EMBCMD_EWR 0x02
+#define EMBCMD_ERD 0x01
+
+/*
+ * Bits in TESTCFG register
+ */
+
+#define TESTCFG_HBDIS 0x80
+
+/*
+ * Bits in CHIPGCR register
+ */
+
+#define CHIPGCR_FCGMII 0x80 /* force GMII (else MII only) */
+#define CHIPGCR_FCFDX 0x40 /* force full duplex */
+#define CHIPGCR_FCRESV 0x20
+#define CHIPGCR_FCMODE 0x10 /* enable MAC forced mode */
+#define CHIPGCR_LPSOPT 0x08
+#define CHIPGCR_TM1US 0x04
+#define CHIPGCR_TM0US 0x02
+#define CHIPGCR_PHYINTEN 0x01
+
+/*
+ * Bits in WOLCR0
+ */
+
+#define WOLCR_MSWOLEN7 0x0080 /* enable pattern match filtering */
+#define WOLCR_MSWOLEN6 0x0040
+#define WOLCR_MSWOLEN5 0x0020
+#define WOLCR_MSWOLEN4 0x0010
+#define WOLCR_MSWOLEN3 0x0008
+#define WOLCR_MSWOLEN2 0x0004
+#define WOLCR_MSWOLEN1 0x0002
+#define WOLCR_MSWOLEN0 0x0001
+#define WOLCR_ARP_EN 0x0001
+
+/*
+ * Bits in WOLCR1
+ */
+
+#define WOLCR_LINKOFF_EN 0x0800 /* link off detected enable */
+#define WOLCR_LINKON_EN 0x0400 /* link on detected enable */
+#define WOLCR_MAGIC_EN 0x0200 /* magic packet filter enable */
+#define WOLCR_UNICAST_EN 0x0100 /* unicast filter enable */
+
+
+/*
+ * Bits in PWCFG
+ */
+
+#define PWCFG_PHYPWOPT 0x80 /* internal MII I/F timing */
+#define PWCFG_PCISTICK 0x40 /* PCI sticky R/W enable */
+#define PWCFG_WOLTYPE 0x20 /* pulse(1) or button (0) */
+#define PWCFG_LEGCY_WOL 0x10
+#define PWCFG_PMCSR_PME_SR 0x08
+#define PWCFG_PMCSR_PME_EN 0x04 /* control by PCISTICK */
+#define PWCFG_LEGACY_WOLSR 0x02 /* Legacy WOL_SR shadow */
+#define PWCFG_LEGACY_WOLEN 0x01 /* Legacy WOL_EN shadow */
+
+/*
+ * Bits in WOLCFG
+ */
+
+#define WOLCFG_PMEOVR 0x80 /* for legacy use, force PMEEN always */
+#define WOLCFG_SAM 0x20 /* accept multicast case reset, default=0 */
+#define WOLCFG_SAB 0x10 /* accept broadcast case reset, default=0 */
+#define WOLCFG_SMIIACC 0x08 /* ?? */
+#define WOLCFG_SGENWH 0x02
+#define WOLCFG_PHYINTEN 0x01 /* 0:PHYINT trigger enable, 1:use internal MII
+ to report status change */
+/*
+ * Bits in WOLSR1
+ */
+
+#define WOLSR_LINKOFF_INT 0x0800
+#define WOLSR_LINKON_INT 0x0400
+#define WOLSR_MAGIC_INT 0x0200
+#define WOLSR_UNICAST_INT 0x0100
+
+/*
+ * Ethernet address filter type
+ */
+
+#define PKT_TYPE_NONE 0x0000 /* Turn off receiver */
+#define PKT_TYPE_DIRECTED 0x0001 /* obselete, directed address is always accepted */
+#define PKT_TYPE_MULTICAST 0x0002
+#define PKT_TYPE_ALL_MULTICAST 0x0004
+#define PKT_TYPE_BROADCAST 0x0008
+#define PKT_TYPE_PROMISCUOUS 0x0020
+#define PKT_TYPE_LONG 0x2000 /* NOTE.... the definition of LONG is >2048 bytes in our chip */
+#define PKT_TYPE_RUNT 0x4000
+#define PKT_TYPE_ERROR 0x8000 /* Accept error packets, e.g. CRC error */
+
+/*
+ * Loopback mode
+ */
+
+#define MAC_LB_NONE 0x00
+#define MAC_LB_INTERNAL 0x01
+#define MAC_LB_EXTERNAL 0x02
+
+/*
+ * Enabled mask value of irq
+ */
+
+#if defined(_SIM)
+#define IMR_MASK_VALUE 0x0033FF0FUL /* initial value of IMR
+ set IMR0 to 0x0F according to spec */
+
+#else
+#define IMR_MASK_VALUE 0x0013FB0FUL /* initial value of IMR
+ ignore MIBFI,RACEI to
+ reduce intr. frequency
+ NOTE.... do not enable NoBuf int mask at driver driver
+ when (1) NoBuf -> RxThreshold = SF
+ (2) OK -> RxThreshold = original value
+ */
+#endif
+
+/*
+ * Revision id
+ */
+
+#define REV_ID_VT3119_A0 0x00
+#define REV_ID_VT3119_A1 0x01
+#define REV_ID_VT3216_A0 0x10
+
+/*
+ * Max time out delay time
+ */
+
+#define W_MAX_TIMEOUT 0x0FFFU
+
+
+/*
+ * MAC registers as a structure. Cannot be directly accessed this
+ * way but generates offsets for readl/writel() calls
+ */
+
+struct mac_regs {
+ volatile u8 PAR[6]; /* 0x00 */
+ volatile u8 RCR;
+ volatile u8 TCR;
+
+ volatile __le32 CR0Set; /* 0x08 */
+ volatile __le32 CR0Clr; /* 0x0C */
+
+ volatile u8 MARCAM[8]; /* 0x10 */
+
+ volatile __le32 DecBaseHi; /* 0x18 */
+ volatile __le16 DbfBaseHi; /* 0x1C */
+ volatile __le16 reserved_1E;
+
+ volatile __le16 ISRCTL; /* 0x20 */
+ volatile u8 TXESR;
+ volatile u8 RXESR;
+
+ volatile __le32 ISR; /* 0x24 */
+ volatile __le32 IMR;
+
+ volatile __le32 TDStatusPort; /* 0x2C */
+
+ volatile __le16 TDCSRSet; /* 0x30 */
+ volatile u8 RDCSRSet;
+ volatile u8 reserved_33;
+ volatile __le16 TDCSRClr;
+ volatile u8 RDCSRClr;
+ volatile u8 reserved_37;
+
+ volatile __le32 RDBaseLo; /* 0x38 */
+ volatile __le16 RDIdx; /* 0x3C */
+ volatile u8 TQETMR; /* 0x3E, VT3216 and above only */
+ volatile u8 RQETMR; /* 0x3F, VT3216 and above only */
+
+ volatile __le32 TDBaseLo[4]; /* 0x40 */
+
+ volatile __le16 RDCSize; /* 0x50 */
+ volatile __le16 TDCSize; /* 0x52 */
+ volatile __le16 TDIdx[4]; /* 0x54 */
+ volatile __le16 tx_pause_timer; /* 0x5C */
+ volatile __le16 RBRDU; /* 0x5E */
+
+ volatile __le32 FIFOTest0; /* 0x60 */
+ volatile __le32 FIFOTest1; /* 0x64 */
+
+ volatile u8 CAMADDR; /* 0x68 */
+ volatile u8 CAMCR; /* 0x69 */
+ volatile u8 GFTEST; /* 0x6A */
+ volatile u8 FTSTCMD; /* 0x6B */
+
+ volatile u8 MIICFG; /* 0x6C */
+ volatile u8 MIISR;
+ volatile u8 PHYSR0;
+ volatile u8 PHYSR1;
+ volatile u8 MIICR;
+ volatile u8 MIIADR;
+ volatile __le16 MIIDATA;
+
+ volatile __le16 SoftTimer0; /* 0x74 */
+ volatile __le16 SoftTimer1;
+
+ volatile u8 CFGA; /* 0x78 */
+ volatile u8 CFGB;
+ volatile u8 CFGC;
+ volatile u8 CFGD;
+
+ volatile __le16 DCFG; /* 0x7C */
+ volatile __le16 MCFG;
+
+ volatile u8 TBIST; /* 0x80 */
+ volatile u8 RBIST;
+ volatile u8 PMCPORT;
+ volatile u8 STICKHW;
+
+ volatile u8 MIBCR; /* 0x84 */
+ volatile u8 reserved_85;
+ volatile u8 rev_id;
+ volatile u8 PORSTS;
+
+ volatile __le32 MIBData; /* 0x88 */
+
+ volatile __le16 EEWrData;
+
+ volatile u8 reserved_8E;
+ volatile u8 BPMDWr;
+ volatile u8 BPCMD;
+ volatile u8 BPMDRd;
+
+ volatile u8 EECHKSUM; /* 0x92 */
+ volatile u8 EECSR;
+
+ volatile __le16 EERdData; /* 0x94 */
+ volatile u8 EADDR;
+ volatile u8 EMBCMD;
+
+
+ volatile u8 JMPSR0; /* 0x98 */
+ volatile u8 JMPSR1;
+ volatile u8 JMPSR2;
+ volatile u8 JMPSR3;
+ volatile u8 CHIPGSR; /* 0x9C */
+ volatile u8 TESTCFG;
+ volatile u8 DEBUG;
+ volatile u8 CHIPGCR;
+
+ volatile __le16 WOLCRSet; /* 0xA0 */
+ volatile u8 PWCFGSet;
+ volatile u8 WOLCFGSet;
+
+ volatile __le16 WOLCRClr; /* 0xA4 */
+ volatile u8 PWCFGCLR;
+ volatile u8 WOLCFGClr;
+
+ volatile __le16 WOLSRSet; /* 0xA8 */
+ volatile __le16 reserved_AA;
+
+ volatile __le16 WOLSRClr; /* 0xAC */
+ volatile __le16 reserved_AE;
+
+ volatile __le16 PatternCRC[8]; /* 0xB0 */
+ volatile __le32 ByteMask[4][4]; /* 0xC0 */
+};
+
+
+enum hw_mib {
+ HW_MIB_ifRxAllPkts = 0,
+ HW_MIB_ifRxOkPkts,
+ HW_MIB_ifTxOkPkts,
+ HW_MIB_ifRxErrorPkts,
+ HW_MIB_ifRxRuntOkPkt,
+ HW_MIB_ifRxRuntErrPkt,
+ HW_MIB_ifRx64Pkts,
+ HW_MIB_ifTx64Pkts,
+ HW_MIB_ifRx65To127Pkts,
+ HW_MIB_ifTx65To127Pkts,
+ HW_MIB_ifRx128To255Pkts,
+ HW_MIB_ifTx128To255Pkts,
+ HW_MIB_ifRx256To511Pkts,
+ HW_MIB_ifTx256To511Pkts,
+ HW_MIB_ifRx512To1023Pkts,
+ HW_MIB_ifTx512To1023Pkts,
+ HW_MIB_ifRx1024To1518Pkts,
+ HW_MIB_ifTx1024To1518Pkts,
+ HW_MIB_ifTxEtherCollisions,
+ HW_MIB_ifRxPktCRCE,
+ HW_MIB_ifRxJumboPkts,
+ HW_MIB_ifTxJumboPkts,
+ HW_MIB_ifRxMacControlFrames,
+ HW_MIB_ifTxMacControlFrames,
+ HW_MIB_ifRxPktFAE,
+ HW_MIB_ifRxLongOkPkt,
+ HW_MIB_ifRxLongPktErrPkt,
+ HW_MIB_ifTXSQEErrors,
+ HW_MIB_ifRxNobuf,
+ HW_MIB_ifRxSymbolErrors,
+ HW_MIB_ifInRangeLengthErrors,
+ HW_MIB_ifLateCollisions,
+ HW_MIB_SIZE
+};
+
+enum chip_type {
+ CHIP_TYPE_VT6110 = 1,
+};
+
+struct velocity_info_tbl {
+ enum chip_type chip_id;
+ const char *name;
+ int txqueue;
+ u32 flags;
+};
+
+#define mac_hw_mibs_init(regs) {\
+ BYTE_REG_BITS_ON(MIBCR_MIBFRZ,&((regs)->MIBCR));\
+ BYTE_REG_BITS_ON(MIBCR_MIBCLR,&((regs)->MIBCR));\
+ do {}\
+ while (BYTE_REG_BITS_IS_ON(MIBCR_MIBCLR,&((regs)->MIBCR)));\
+ BYTE_REG_BITS_OFF(MIBCR_MIBFRZ,&((regs)->MIBCR));\
+}
+
+#define mac_read_isr(regs) readl(&((regs)->ISR))
+#define mac_write_isr(regs, x) writel((x),&((regs)->ISR))
+#define mac_clear_isr(regs) writel(0xffffffffL,&((regs)->ISR))
+
+#define mac_write_int_mask(mask, regs) writel((mask),&((regs)->IMR));
+#define mac_disable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Clr))
+#define mac_enable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Set))
+
+#define mac_set_dma_length(regs, n) {\
+ BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\
+}
+
+#define mac_set_rx_thresh(regs, n) {\
+ BYTE_REG_BITS_SET((n),(MCFG_RFT0|MCFG_RFT1),&((regs)->MCFG));\
+}
+
+#define mac_rx_queue_run(regs) {\
+ writeb(TRDCSR_RUN, &((regs)->RDCSRSet));\
+}
+
+#define mac_rx_queue_wake(regs) {\
+ writeb(TRDCSR_WAK, &((regs)->RDCSRSet));\
+}
+
+#define mac_tx_queue_run(regs, n) {\
+ writew(TRDCSR_RUN<<((n)*4),&((regs)->TDCSRSet));\
+}
+
+#define mac_tx_queue_wake(regs, n) {\
+ writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\
+}
+
+static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) {
+ int i=0;
+
+ BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR));
+ do {
+ udelay(10);
+ if (i++>0x1000)
+ break;
+ } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR)));
+}
+
+/*
+ * Header for WOL definitions. Used to compute hashes
+ */
+
+typedef u8 MCAM_ADDR[ETH_ALEN];
+
+struct arp_packet {
+ u8 dest_mac[ETH_ALEN];
+ u8 src_mac[ETH_ALEN];
+ __be16 type;
+ __be16 ar_hrd;
+ __be16 ar_pro;
+ u8 ar_hln;
+ u8 ar_pln;
+ __be16 ar_op;
+ u8 ar_sha[ETH_ALEN];
+ u8 ar_sip[4];
+ u8 ar_tha[ETH_ALEN];
+ u8 ar_tip[4];
+} __packed;
+
+struct _magic_packet {
+ u8 dest_mac[6];
+ u8 src_mac[6];
+ __be16 type;
+ u8 MAC[16][6];
+ u8 password[6];
+} __packed;
+
+/*
+ * Store for chip context when saving and restoring status. Not
+ * all fields are saved/restored currently.
+ */
+
+struct velocity_context {
+ u8 mac_reg[256];
+ MCAM_ADDR cam_addr[MCAM_SIZE];
+ u16 vcam[VCAM_SIZE];
+ u32 cammask[2];
+ u32 patcrc[2];
+ u32 pattern[8];
+};
+
+/*
+ * Registers in the MII (offset unit is WORD)
+ */
+
+// Marvell 88E1000/88E1000S
+#define MII_REG_PSCR 0x10 // PHY specific control register
+
+//
+// Bits in the Silicon revision register
+//
+
+#define TCSR_ECHODIS 0x2000 //
+#define AUXCR_MDPPS 0x0004 //
+
+// Bits in the PLED register
+#define PLED_LALBE 0x0004 //
+
+// Marvell 88E1000/88E1000S Bits in the PHY specific control register (10h)
+#define PSCR_ACRSTX 0x0800 // Assert CRS on Transmit
+
+#define PHYID_CICADA_CS8201 0x000FC410UL
+#define PHYID_VT3216_32BIT 0x000FC610UL
+#define PHYID_VT3216_64BIT 0x000FC600UL
+#define PHYID_MARVELL_1000 0x01410C50UL
+#define PHYID_MARVELL_1000S 0x01410C40UL
+
+#define PHYID_REV_ID_MASK 0x0000000FUL
+
+#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK)
+
+#define MII_REG_BITS_ON(x,i,p) do {\
+ u16 w;\
+ velocity_mii_read((p),(i),&(w));\
+ (w)|=(x);\
+ velocity_mii_write((p),(i),(w));\
+} while (0)
+
+#define MII_REG_BITS_OFF(x,i,p) do {\
+ u16 w;\
+ velocity_mii_read((p),(i),&(w));\
+ (w)&=(~(x));\
+ velocity_mii_write((p),(i),(w));\
+} while (0)
+
+#define MII_REG_BITS_IS_ON(x,i,p) ({\
+ u16 w;\
+ velocity_mii_read((p),(i),&(w));\
+ ((int) ((w) & (x)));})
+
+#define MII_GET_PHY_ID(p) ({\
+ u32 id;\
+ velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
+ velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
+ (id);})
+
+/*
+ * Inline debug routine
+ */
+
+
+enum velocity_msg_level {
+ MSG_LEVEL_ERR = 0, //Errors that will cause abnormal operation.
+ MSG_LEVEL_NOTICE = 1, //Some errors need users to be notified.
+ MSG_LEVEL_INFO = 2, //Normal message.
+ MSG_LEVEL_VERBOSE = 3, //Will report all trival errors.
+ MSG_LEVEL_DEBUG = 4 //Only for debug purpose.
+};
+
+#ifdef VELOCITY_DEBUG
+#define ASSERT(x) { \
+ if (!(x)) { \
+ printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\
+ __func__, __LINE__);\
+ BUG(); \
+ }\
+}
+#define VELOCITY_DBG(p,args...) printk(p, ##args)
+#else
+#define ASSERT(x)
+#define VELOCITY_DBG(x)
+#endif
+
+#define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0)
+
+#define VELOCITY_PRT_CAMMASK(p,t) {\
+ int i;\
+ if ((t)==VELOCITY_MULTICAST_CAM) {\
+ for (i=0;i<(MCAM_SIZE/8);i++)\
+ printk("%02X",(p)->mCAMmask[i]);\
+ }\
+ else {\
+ for (i=0;i<(VCAM_SIZE/8);i++)\
+ printk("%02X",(p)->vCAMmask[i]);\
+ }\
+ printk("\n");\
+}
+
+
+
+#define VELOCITY_WOL_MAGIC 0x00000000UL
+#define VELOCITY_WOL_PHY 0x00000001UL
+#define VELOCITY_WOL_ARP 0x00000002UL
+#define VELOCITY_WOL_UCAST 0x00000004UL
+#define VELOCITY_WOL_BCAST 0x00000010UL
+#define VELOCITY_WOL_MCAST 0x00000020UL
+#define VELOCITY_WOL_MAGIC_SEC 0x00000040UL
+
+/*
+ * Flags for options
+ */
+
+#define VELOCITY_FLAGS_TAGGING 0x00000001UL
+#define VELOCITY_FLAGS_RX_CSUM 0x00000004UL
+#define VELOCITY_FLAGS_IP_ALIGN 0x00000008UL
+#define VELOCITY_FLAGS_VAL_PKT_LEN 0x00000010UL
+
+#define VELOCITY_FLAGS_FLOW_CTRL 0x01000000UL
+
+/*
+ * Flags for driver status
+ */
+
+#define VELOCITY_FLAGS_OPENED 0x00010000UL
+#define VELOCITY_FLAGS_VMNS_CONNECTED 0x00020000UL
+#define VELOCITY_FLAGS_VMNS_COMMITTED 0x00040000UL
+#define VELOCITY_FLAGS_WOL_ENABLED 0x00080000UL
+
+/*
+ * Flags for MII status
+ */
+
+#define VELOCITY_LINK_FAIL 0x00000001UL
+#define VELOCITY_SPEED_10 0x00000002UL
+#define VELOCITY_SPEED_100 0x00000004UL
+#define VELOCITY_SPEED_1000 0x00000008UL
+#define VELOCITY_DUPLEX_FULL 0x00000010UL
+#define VELOCITY_AUTONEG_ENABLE 0x00000020UL
+#define VELOCITY_FORCED_BY_EEPROM 0x00000040UL
+
+/*
+ * For velocity_set_media_duplex
+ */
+
+#define VELOCITY_LINK_CHANGE 0x00000001UL
+
+enum speed_opt {
+ SPD_DPX_AUTO = 0,
+ SPD_DPX_100_HALF = 1,
+ SPD_DPX_100_FULL = 2,
+ SPD_DPX_10_HALF = 3,
+ SPD_DPX_10_FULL = 4,
+ SPD_DPX_1000_FULL = 5
+};
+
+enum velocity_init_type {
+ VELOCITY_INIT_COLD = 0,
+ VELOCITY_INIT_RESET,
+ VELOCITY_INIT_WOL
+};
+
+enum velocity_flow_cntl_type {
+ FLOW_CNTL_DEFAULT = 1,
+ FLOW_CNTL_TX,
+ FLOW_CNTL_RX,
+ FLOW_CNTL_TX_RX,
+ FLOW_CNTL_DISABLE,
+};
+
+struct velocity_opt {
+ int numrx; /* Number of RX descriptors */
+ int numtx; /* Number of TX descriptors */
+ enum speed_opt spd_dpx; /* Media link mode */
+
+ int DMA_length; /* DMA length */
+ int rx_thresh; /* RX_THRESH */
+ int flow_cntl;
+ int wol_opts; /* Wake on lan options */
+ int td_int_count;
+ int int_works;
+ int rx_bandwidth_hi;
+ int rx_bandwidth_lo;
+ int rx_bandwidth_en;
+ int rxqueue_timer;
+ int txqueue_timer;
+ int tx_intsup;
+ int rx_intsup;
+ u32 flags;
+};
+
+#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->tx.used[(q)]))
+
+#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx])
+
+struct velocity_info {
+ struct pci_dev *pdev;
+ struct net_device *dev;
+
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u8 ip_addr[4];
+ enum chip_type chip_id;
+
+ struct mac_regs __iomem * mac_regs;
+ unsigned long memaddr;
+ unsigned long ioaddr;
+
+ struct tx_info {
+ int numq;
+
+ /* FIXME: the locality of the data seems rather poor. */
+ int used[TX_QUEUE_NO];
+ int curr[TX_QUEUE_NO];
+ int tail[TX_QUEUE_NO];
+ struct tx_desc *rings[TX_QUEUE_NO];
+ struct velocity_td_info *infos[TX_QUEUE_NO];
+ dma_addr_t pool_dma[TX_QUEUE_NO];
+ } tx;
+
+ struct rx_info {
+ int buf_sz;
+
+ int dirty;
+ int curr;
+ u32 filled;
+ struct rx_desc *ring;
+ struct velocity_rd_info *info; /* It's an array */
+ dma_addr_t pool_dma;
+ } rx;
+
+ u32 mib_counter[MAX_HW_MIB_COUNTER];
+ struct velocity_opt options;
+
+ u32 int_mask;
+
+ u32 flags;
+
+ u32 mii_status;
+ u32 phy_id;
+ int multicast_limit;
+
+ u8 vCAMmask[(VCAM_SIZE / 8)];
+ u8 mCAMmask[(MCAM_SIZE / 8)];
+
+ spinlock_t lock;
+
+ int wol_opts;
+ u8 wol_passwd[6];
+
+ struct velocity_context context;
+
+ u32 ticks;
+
+ u8 rev_id;
+
+ struct napi_struct napi;
+};
+
+/**
+ * velocity_get_ip - find an IP address for the device
+ * @vptr: Velocity to query
+ *
+ * Dig out an IP address for this interface so that we can
+ * configure wakeup with WOL for ARP. If there are multiple IP
+ * addresses on this chain then we use the first - multi-IP WOL is not
+ * supported.
+ *
+ */
+
+static inline int velocity_get_ip(struct velocity_info *vptr)
+{
+ struct in_device *in_dev;
+ struct in_ifaddr *ifa;
+ int res = -ENOENT;
+
+ rcu_read_lock();
+ in_dev = __in_dev_get_rcu(vptr->dev);
+ if (in_dev != NULL) {
+ ifa = (struct in_ifaddr *) in_dev->ifa_list;
+ if (ifa != NULL) {
+ memcpy(vptr->ip_addr, &ifa->ifa_address, 4);
+ res = 0;
+ }
+ }
+ rcu_read_unlock();
+ return res;
+}
+
+/**
+ * velocity_update_hw_mibs - fetch MIB counters from chip
+ * @vptr: velocity to update
+ *
+ * The velocity hardware keeps certain counters in the hardware
+ * side. We need to read these when the user asks for statistics
+ * or when they overflow (causing an interrupt). The read of the
+ * statistic clears it, so we keep running master counters in user
+ * space.
+ */
+
+static inline void velocity_update_hw_mibs(struct velocity_info *vptr)
+{
+ u32 tmp;
+ int i;
+ BYTE_REG_BITS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR));
+
+ while (BYTE_REG_BITS_IS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR)));
+
+ BYTE_REG_BITS_ON(MIBCR_MPTRINI, &(vptr->mac_regs->MIBCR));
+ for (i = 0; i < HW_MIB_SIZE; i++) {
+ tmp = readl(&(vptr->mac_regs->MIBData)) & 0x00FFFFFFUL;
+ vptr->mib_counter[i] += tmp;
+ }
+}
+
+/**
+ * init_flow_control_register - set up flow control
+ * @vptr: velocity to configure
+ *
+ * Configure the flow control registers for this velocity device.
+ */
+
+static inline void init_flow_control_register(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem * regs = vptr->mac_regs;
+
+ /* Set {XHITH1, XHITH0, XLTH1, XLTH0} in FlowCR1 to {1, 0, 1, 1}
+ depend on RD=64, and Turn on XNOEN in FlowCR1 */
+ writel((CR0_XONEN | CR0_XHITH1 | CR0_XLTH1 | CR0_XLTH0), ®s->CR0Set);
+ writel((CR0_FDXTFCEN | CR0_FDXRFCEN | CR0_HDXFCEN | CR0_XHITH0), ®s->CR0Clr);
+
+ /* Set TxPauseTimer to 0xFFFF */
+ writew(0xFFFF, ®s->tx_pause_timer);
+
+ /* Initialize RBRDU to Rx buffer count. */
+ writew(vptr->options.numrx, ®s->RBRDU);
+}
+
+
+#endif
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
deleted file mode 100644
index 7f23ab913fd9..000000000000
--- a/drivers/net/via-rhine.c
+++ /dev/null
@@ -1,2340 +0,0 @@
-/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
-/*
- Written 1998-2001 by Donald Becker.
-
- Current Maintainer: Roger Luethi <rl@hellgate.ch>
-
- This software may be used and distributed according to the terms of
- the GNU General Public License (GPL), incorporated herein by reference.
- Drivers based on or derived from this code fall under the GPL and must
- retain the authorship, copyright and license notice. This file is not
- a complete program and may only be used when the entire operating
- system is licensed under the GPL.
-
- This driver is designed for the VIA VT86C100A Rhine-I.
- It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
- and management NIC 6105M).
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
-
- This driver contains some changes from the original Donald Becker
- version. He may or may not be interested in bug reports on this
- code. You can find his versions at:
- http://www.scyld.com/network/via-rhine.html
- [link no longer provides useful info -jgarzik]
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.5.0"
-#define DRV_RELDATE "2010-10-09"
-
-
-/* A few user-configurable values.
- These may be modified when a driver module is loaded. */
-
-#define DEBUG
-static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
-static int max_interrupt_work = 20;
-
-/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
- Setting to > 1518 effectively disables this feature. */
-#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
- defined(CONFIG_SPARC) || defined(__ia64__) || \
- defined(__sh__) || defined(__mips__)
-static int rx_copybreak = 1518;
-#else
-static int rx_copybreak;
-#endif
-
-/* Work-around for broken BIOSes: they are unable to get the chip back out of
- power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-static int avoid_D3;
-
-/*
- * In case you are looking for 'options[]' or 'full_duplex[]', they
- * are gone. Use ethtool(8) instead.
- */
-
-/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
- The Rhine has a 64 element 8390-like hash table. */
-static const int multicast_filter_limit = 32;
-
-
-/* Operational parameters that are set at compile time. */
-
-/* Keep the ring sizes a power of two for compile efficiency.
- The compiler will convert <unsigned>'%'<2^N> into a bit mask.
- Making the Tx ring too large decreases the effectiveness of channel
- bonding and packet priority.
- There are no ill effects from too-large receive rings. */
-#define TX_RING_SIZE 16
-#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
-#define RX_RING_SIZE 64
-
-/* Operational parameters that usually are not changed. */
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT (2*HZ)
-
-#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/crc32.h>
-#include <linux/if_vlan.h>
-#include <linux/bitops.h>
-#include <linux/workqueue.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <linux/dmi.h>
-
-/* These identify the driver base version and may not be removed. */
-static const char version[] __devinitconst =
- "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
-
-/* This driver was written to use PCI memory space. Some early versions
- of the Rhine may only work correctly with I/O space accesses. */
-#ifdef CONFIG_VIA_RHINE_MMIO
-#define USE_MMIO
-#else
-#endif
-
-MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
-MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
-MODULE_LICENSE("GPL");
-
-module_param(max_interrupt_work, int, 0);
-module_param(debug, int, 0);
-module_param(rx_copybreak, int, 0);
-module_param(avoid_D3, bool, 0);
-MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
-MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
-MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
-MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
-
-#define MCAM_SIZE 32
-#define VCAM_SIZE 32
-
-/*
- Theory of Operation
-
-I. Board Compatibility
-
-This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
-controller.
-
-II. Board-specific settings
-
-Boards with this chip are functional only in a bus-master PCI slot.
-
-Many operational settings are loaded from the EEPROM to the Config word at
-offset 0x78. For most of these settings, this driver assumes that they are
-correct.
-If this driver is compiled to use PCI memory space operations the EEPROM
-must be configured to enable memory ops.
-
-III. Driver operation
-
-IIIa. Ring buffers
-
-This driver uses two statically allocated fixed-size descriptor lists
-formed into rings by a branch from the final descriptor to the beginning of
-the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
-
-IIIb/c. Transmit/Receive Structure
-
-This driver attempts to use a zero-copy receive and transmit scheme.
-
-Alas, all data buffers are required to start on a 32 bit boundary, so
-the driver must often copy transmit packets into bounce buffers.
-
-The driver allocates full frame size skbuffs for the Rx ring buffers at
-open() time and passes the skb->data field to the chip as receive data
-buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
-a fresh skbuff is allocated and the frame is copied to the new skbuff.
-When the incoming frame is larger, the skbuff is passed directly up the
-protocol stack. Buffers consumed this way are replaced by newly allocated
-skbuffs in the last phase of rhine_rx().
-
-The RX_COPYBREAK value is chosen to trade-off the memory wasted by
-using a full-sized skbuff for small frames vs. the copying costs of larger
-frames. New boards are typically used in generously configured machines
-and the underfilled buffers have negligible impact compared to the benefit of
-a single allocation size, so the default value of zero results in never
-copying packets. When copying is done, the cost is usually mitigated by using
-a combined copy/checksum routine. Copying also preloads the cache, which is
-most useful with small frames.
-
-Since the VIA chips are only able to transfer data to buffers on 32 bit
-boundaries, the IP header at offset 14 in an ethernet frame isn't
-longword aligned for further processing. Copying these unaligned buffers
-has the beneficial effect of 16-byte aligning the IP header.
-
-IIId. Synchronization
-
-The driver runs as two independent, single-threaded flows of control. One
-is the send-packet routine, which enforces single-threaded use by the
-netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
-which is single threaded by the hardware and interrupt handling software.
-
-The send packet thread has partial control over the Tx ring. It locks the
-netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
-the ring is not available it stops the transmit queue by
-calling netif_stop_queue.
-
-The interrupt handler has exclusive control over the Rx ring and records stats
-from the Tx ring. After reaping the stats, it marks the Tx queue entry as
-empty by incrementing the dirty_tx mark. If at least half of the entries in
-the Rx ring are available the transmit queue is woken up if it was stopped.
-
-IV. Notes
-
-IVb. References
-
-Preliminary VT86C100A manual from http://www.via.com.tw/
-http://www.scyld.com/expert/100mbps.html
-http://www.scyld.com/expert/NWay.html
-ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
-ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
-
-
-IVc. Errata
-
-The VT86C100A manual is not reliable information.
-The 3043 chip does not handle unaligned transmit or receive buffers, resulting
-in significant performance degradation for bounce buffer copies on transmit
-and unaligned IP headers on receive.
-The chip does not pad to minimum transmit length.
-
-*/
-
-
-/* This table drives the PCI probe routines. It's mostly boilerplate in all
- of the drivers, and will likely be provided by some future kernel.
- Note the matching code -- the first table entry matchs all 56** cards but
- second only the 1234 card.
-*/
-
-enum rhine_revs {
- VT86C100A = 0x00,
- VTunknown0 = 0x20,
- VT6102 = 0x40,
- VT8231 = 0x50, /* Integrated MAC */
- VT8233 = 0x60, /* Integrated MAC */
- VT8235 = 0x74, /* Integrated MAC */
- VT8237 = 0x78, /* Integrated MAC */
- VTunknown1 = 0x7C,
- VT6105 = 0x80,
- VT6105_B0 = 0x83,
- VT6105L = 0x8A,
- VT6107 = 0x8C,
- VTunknown2 = 0x8E,
- VT6105M = 0x90, /* Management adapter */
-};
-
-enum rhine_quirks {
- rqWOL = 0x0001, /* Wake-On-LAN support */
- rqForceReset = 0x0002,
- rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
- rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
- rqRhineI = 0x0100, /* See comment below */
-};
-/*
- * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
- * MMIO as well as for the collision counter and the Tx FIFO underflow
- * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
- */
-
-/* Beware of PCI posted writes */
-#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
-
-static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = {
- { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
- { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
- { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
- { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
- { } /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
-
-
-/* Offsets to the device registers. */
-enum register_offsets {
- StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
- ChipCmd1=0x09, TQWake=0x0A,
- IntrStatus=0x0C, IntrEnable=0x0E,
- MulticastFilter0=0x10, MulticastFilter1=0x14,
- RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
- MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F,
- MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
- ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
- RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
- StickyHW=0x83, IntrStatus2=0x84,
- CamMask=0x88, CamCon=0x92, CamAddr=0x93,
- WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
- WOLcrClr1=0xA6, WOLcgClr=0xA7,
- PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
-};
-
-/* Bits in ConfigD */
-enum backoff_bits {
- BackOptional=0x01, BackModify=0x02,
- BackCaptureEffect=0x04, BackRandom=0x08
-};
-
-/* Bits in the TxConfig (TCR) register */
-enum tcr_bits {
- TCR_PQEN=0x01,
- TCR_LB0=0x02, /* loopback[0] */
- TCR_LB1=0x04, /* loopback[1] */
- TCR_OFSET=0x08,
- TCR_RTGOPT=0x10,
- TCR_RTFT0=0x20,
- TCR_RTFT1=0x40,
- TCR_RTSF=0x80,
-};
-
-/* Bits in the CamCon (CAMC) register */
-enum camcon_bits {
- CAMC_CAMEN=0x01,
- CAMC_VCAMSL=0x02,
- CAMC_CAMWR=0x04,
- CAMC_CAMRD=0x08,
-};
-
-/* Bits in the PCIBusConfig1 (BCR1) register */
-enum bcr1_bits {
- BCR1_POT0=0x01,
- BCR1_POT1=0x02,
- BCR1_POT2=0x04,
- BCR1_CTFT0=0x08,
- BCR1_CTFT1=0x10,
- BCR1_CTSF=0x20,
- BCR1_TXQNOBK=0x40, /* for VT6105 */
- BCR1_VIDFR=0x80, /* for VT6105 */
- BCR1_MED0=0x40, /* for VT6102 */
- BCR1_MED1=0x80, /* for VT6102 */
-};
-
-#ifdef USE_MMIO
-/* Registers we check that mmio and reg are the same. */
-static const int mmio_verify_registers[] = {
- RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
- 0
-};
-#endif
-
-/* Bits in the interrupt status/mask registers. */
-enum intr_status_bits {
- IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
- IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
- IntrPCIErr=0x0040,
- IntrStatsMax=0x0080, IntrRxEarly=0x0100,
- IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
- IntrTxAborted=0x2000, IntrLinkChange=0x4000,
- IntrRxWakeUp=0x8000,
- IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
- IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
- IntrTxErrSummary=0x082218,
-};
-
-/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
-enum wol_bits {
- WOLucast = 0x10,
- WOLmagic = 0x20,
- WOLbmcast = 0x30,
- WOLlnkon = 0x40,
- WOLlnkoff = 0x80,
-};
-
-/* The Rx and Tx buffer descriptors. */
-struct rx_desc {
- __le32 rx_status;
- __le32 desc_length; /* Chain flag, Buffer/frame length */
- __le32 addr;
- __le32 next_desc;
-};
-struct tx_desc {
- __le32 tx_status;
- __le32 desc_length; /* Chain flag, Tx Config, Frame length */
- __le32 addr;
- __le32 next_desc;
-};
-
-/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
-#define TXDESC 0x00e08000
-
-enum rx_status_bits {
- RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
-};
-
-/* Bits in *_desc.*_status */
-enum desc_status_bits {
- DescOwn=0x80000000
-};
-
-/* Bits in *_desc.*_length */
-enum desc_length_bits {
- DescTag=0x00010000
-};
-
-/* Bits in ChipCmd. */
-enum chip_cmd_bits {
- CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
- CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
- Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
- Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
-};
-
-struct rhine_private {
- /* Bit mask for configured VLAN ids */
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
-
- /* Descriptor rings */
- struct rx_desc *rx_ring;
- struct tx_desc *tx_ring;
- dma_addr_t rx_ring_dma;
- dma_addr_t tx_ring_dma;
-
- /* The addresses of receive-in-place skbuffs. */
- struct sk_buff *rx_skbuff[RX_RING_SIZE];
- dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
-
- /* The saved address of a sent-in-place packet/buffer, for later free(). */
- struct sk_buff *tx_skbuff[TX_RING_SIZE];
- dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
-
- /* Tx bounce buffers (Rhine-I only) */
- unsigned char *tx_buf[TX_RING_SIZE];
- unsigned char *tx_bufs;
- dma_addr_t tx_bufs_dma;
-
- struct pci_dev *pdev;
- long pioaddr;
- struct net_device *dev;
- struct napi_struct napi;
- spinlock_t lock;
- struct work_struct reset_task;
-
- /* Frequently used values: keep some adjacent for cache effect. */
- u32 quirks;
- struct rx_desc *rx_head_desc;
- unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
- unsigned int cur_tx, dirty_tx;
- unsigned int rx_buf_sz; /* Based on MTU+slack. */
- u8 wolopts;
-
- u8 tx_thresh, rx_thresh;
-
- struct mii_if_info mii_if;
- void __iomem *base;
-};
-
-#define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
-#define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
-#define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
-
-#define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x))
-#define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x))
-#define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x))
-
-#define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
-#define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
-#define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
-
-#define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
-#define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
-#define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
-
-
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
-static int rhine_open(struct net_device *dev);
-static void rhine_reset_task(struct work_struct *work);
-static void rhine_tx_timeout(struct net_device *dev);
-static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
-static void rhine_tx(struct net_device *dev);
-static int rhine_rx(struct net_device *dev, int limit);
-static void rhine_error(struct net_device *dev, int intr_status);
-static void rhine_set_rx_mode(struct net_device *dev);
-static struct net_device_stats *rhine_get_stats(struct net_device *dev);
-static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static const struct ethtool_ops netdev_ethtool_ops;
-static int rhine_close(struct net_device *dev);
-static void rhine_shutdown (struct pci_dev *pdev);
-static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid);
-static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid);
-static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr);
-static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr);
-static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask);
-static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask);
-static void rhine_init_cam_filter(struct net_device *dev);
-static void rhine_update_vcam(struct net_device *dev);
-
-#define RHINE_WAIT_FOR(condition) \
-do { \
- int i = 1024; \
- while (!(condition) && --i) \
- ; \
- if (debug > 1 && i < 512) \
- pr_info("%4d cycles used @ %s:%d\n", \
- 1024 - i, __func__, __LINE__); \
-} while (0)
-
-static inline u32 get_intr_status(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- u32 intr_status;
-
- intr_status = ioread16(ioaddr + IntrStatus);
- /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
- if (rp->quirks & rqStatusWBRace)
- intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
- return intr_status;
-}
-
-/*
- * Get power related registers into sane state.
- * Notify user about past WOL event.
- */
-static void rhine_power_init(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- u16 wolstat;
-
- if (rp->quirks & rqWOL) {
- /* Make sure chip is in power state D0 */
- iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
-
- /* Disable "force PME-enable" */
- iowrite8(0x80, ioaddr + WOLcgClr);
-
- /* Clear power-event config bits (WOL) */
- iowrite8(0xFF, ioaddr + WOLcrClr);
- /* More recent cards can manage two additional patterns */
- if (rp->quirks & rq6patterns)
- iowrite8(0x03, ioaddr + WOLcrClr1);
-
- /* Save power-event status bits */
- wolstat = ioread8(ioaddr + PwrcsrSet);
- if (rp->quirks & rq6patterns)
- wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
-
- /* Clear power-event status bits */
- iowrite8(0xFF, ioaddr + PwrcsrClr);
- if (rp->quirks & rq6patterns)
- iowrite8(0x03, ioaddr + PwrcsrClr1);
-
- if (wolstat) {
- char *reason;
- switch (wolstat) {
- case WOLmagic:
- reason = "Magic packet";
- break;
- case WOLlnkon:
- reason = "Link went up";
- break;
- case WOLlnkoff:
- reason = "Link went down";
- break;
- case WOLucast:
- reason = "Unicast packet";
- break;
- case WOLbmcast:
- reason = "Multicast/broadcast packet";
- break;
- default:
- reason = "Unknown";
- }
- netdev_info(dev, "Woke system up. Reason: %s\n",
- reason);
- }
- }
-}
-
-static void rhine_chip_reset(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
- IOSYNC;
-
- if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
- netdev_info(dev, "Reset not complete yet. Trying harder.\n");
-
- /* Force reset */
- if (rp->quirks & rqForceReset)
- iowrite8(0x40, ioaddr + MiscCmd);
-
- /* Reset can take somewhat longer (rare) */
- RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
- }
-
- if (debug > 1)
- netdev_info(dev, "Reset %s\n",
- (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
- "failed" : "succeeded");
-}
-
-#ifdef USE_MMIO
-static void enable_mmio(long pioaddr, u32 quirks)
-{
- int n;
- if (quirks & rqRhineI) {
- /* More recent docs say that this bit is reserved ... */
- n = inb(pioaddr + ConfigA) | 0x20;
- outb(n, pioaddr + ConfigA);
- } else {
- n = inb(pioaddr + ConfigD) | 0x80;
- outb(n, pioaddr + ConfigD);
- }
-}
-#endif
-
-/*
- * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
- * (plus 0x6C for Rhine-I/II)
- */
-static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- outb(0x20, pioaddr + MACRegEEcsr);
- RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
-
-#ifdef USE_MMIO
- /*
- * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
- * MMIO. If reloading EEPROM was done first this could be avoided, but
- * it is not known if that still works with the "win98-reboot" problem.
- */
- enable_mmio(pioaddr, rp->quirks);
-#endif
-
- /* Turn off EEPROM-controlled wake-up (magic packet) */
- if (rp->quirks & rqWOL)
- iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
-
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void rhine_poll(struct net_device *dev)
-{
- disable_irq(dev->irq);
- rhine_interrupt(dev->irq, (void *)dev);
- enable_irq(dev->irq);
-}
-#endif
-
-static int rhine_napipoll(struct napi_struct *napi, int budget)
-{
- struct rhine_private *rp = container_of(napi, struct rhine_private, napi);
- struct net_device *dev = rp->dev;
- void __iomem *ioaddr = rp->base;
- int work_done;
-
- work_done = rhine_rx(dev, budget);
-
- if (work_done < budget) {
- napi_complete(napi);
-
- iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
- IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
- IntrTxDone | IntrTxError | IntrTxUnderrun |
- IntrPCIErr | IntrStatsMax | IntrLinkChange,
- ioaddr + IntrEnable);
- }
- return work_done;
-}
-
-static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- /* Reset the chip to erase previous misconfiguration. */
- rhine_chip_reset(dev);
-
- /* Rhine-I needs extra time to recuperate before EEPROM reload */
- if (rp->quirks & rqRhineI)
- msleep(5);
-
- /* Reload EEPROM controlled bytes cleared by soft reset */
- rhine_reload_eeprom(pioaddr, dev);
-}
-
-static const struct net_device_ops rhine_netdev_ops = {
- .ndo_open = rhine_open,
- .ndo_stop = rhine_close,
- .ndo_start_xmit = rhine_start_tx,
- .ndo_get_stats = rhine_get_stats,
- .ndo_set_multicast_list = rhine_set_rx_mode,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_do_ioctl = netdev_ioctl,
- .ndo_tx_timeout = rhine_tx_timeout,
- .ndo_vlan_rx_add_vid = rhine_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = rhine_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = rhine_poll,
-#endif
-};
-
-static int __devinit rhine_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *dev;
- struct rhine_private *rp;
- int i, rc;
- u32 quirks;
- long pioaddr;
- long memaddr;
- void __iomem *ioaddr;
- int io_size, phy_id;
- const char *name;
-#ifdef USE_MMIO
- int bar = 1;
-#else
- int bar = 0;
-#endif
-
-/* when built into the kernel, we only print version if device is found */
-#ifndef MODULE
- pr_info_once("%s\n", version);
-#endif
-
- io_size = 256;
- phy_id = 0;
- quirks = 0;
- name = "Rhine";
- if (pdev->revision < VTunknown0) {
- quirks = rqRhineI;
- io_size = 128;
- }
- else if (pdev->revision >= VT6102) {
- quirks = rqWOL | rqForceReset;
- if (pdev->revision < VT6105) {
- name = "Rhine II";
- quirks |= rqStatusWBRace; /* Rhine-II exclusive */
- }
- else {
- phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
- if (pdev->revision >= VT6105_B0)
- quirks |= rq6patterns;
- if (pdev->revision < VT6105M)
- name = "Rhine III";
- else
- name = "Rhine III (Management Adapter)";
- }
- }
-
- rc = pci_enable_device(pdev);
- if (rc)
- goto err_out;
-
- /* this should always be supported */
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit PCI DMA addresses not supported by the card!?\n");
- goto err_out;
- }
-
- /* sanity check */
- if ((pci_resource_len(pdev, 0) < io_size) ||
- (pci_resource_len(pdev, 1) < io_size)) {
- rc = -EIO;
- dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
- goto err_out;
- }
-
- pioaddr = pci_resource_start(pdev, 0);
- memaddr = pci_resource_start(pdev, 1);
-
- pci_set_master(pdev);
-
- dev = alloc_etherdev(sizeof(struct rhine_private));
- if (!dev) {
- rc = -ENOMEM;
- dev_err(&pdev->dev, "alloc_etherdev failed\n");
- goto err_out;
- }
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- rp = netdev_priv(dev);
- rp->dev = dev;
- rp->quirks = quirks;
- rp->pioaddr = pioaddr;
- rp->pdev = pdev;
-
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
- goto err_out_free_netdev;
-
- ioaddr = pci_iomap(pdev, bar, io_size);
- if (!ioaddr) {
- rc = -EIO;
- dev_err(&pdev->dev,
- "ioremap failed for device %s, region 0x%X @ 0x%lX\n",
- pci_name(pdev), io_size, memaddr);
- goto err_out_free_res;
- }
-
-#ifdef USE_MMIO
- enable_mmio(pioaddr, quirks);
-
- /* Check that selected MMIO registers match the PIO ones */
- i = 0;
- while (mmio_verify_registers[i]) {
- int reg = mmio_verify_registers[i++];
- unsigned char a = inb(pioaddr+reg);
- unsigned char b = readb(ioaddr+reg);
- if (a != b) {
- rc = -EIO;
- dev_err(&pdev->dev,
- "MMIO do not match PIO [%02x] (%02x != %02x)\n",
- reg, a, b);
- goto err_out_unmap;
- }
- }
-#endif /* USE_MMIO */
-
- dev->base_addr = (unsigned long)ioaddr;
- rp->base = ioaddr;
-
- /* Get chip registers into a sane state */
- rhine_power_init(dev);
- rhine_hw_init(dev, pioaddr);
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
-
- if (!is_valid_ether_addr(dev->dev_addr)) {
- /* Report it and use a random ethernet address instead */
- netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
- random_ether_addr(dev->dev_addr);
- netdev_info(dev, "Using random MAC address: %pM\n",
- dev->dev_addr);
- }
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
- /* For Rhine-I/II, phy_id is loaded from EEPROM */
- if (!phy_id)
- phy_id = ioread8(ioaddr + 0x6C);
-
- dev->irq = pdev->irq;
-
- spin_lock_init(&rp->lock);
- INIT_WORK(&rp->reset_task, rhine_reset_task);
-
- rp->mii_if.dev = dev;
- rp->mii_if.mdio_read = mdio_read;
- rp->mii_if.mdio_write = mdio_write;
- rp->mii_if.phy_id_mask = 0x1f;
- rp->mii_if.reg_num_mask = 0x1f;
-
- /* The chip-specific entries in the device structure. */
- dev->netdev_ops = &rhine_netdev_ops;
- dev->ethtool_ops = &netdev_ethtool_ops,
- dev->watchdog_timeo = TX_TIMEOUT;
-
- netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
-
- if (rp->quirks & rqRhineI)
- dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
-
- if (pdev->revision >= VT6105M)
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
-
- /* dev->name not defined before register_netdev()! */
- rc = register_netdev(dev);
- if (rc)
- goto err_out_unmap;
-
- netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
- name,
-#ifdef USE_MMIO
- memaddr,
-#else
- (long)ioaddr,
-#endif
- dev->dev_addr, pdev->irq);
-
- pci_set_drvdata(pdev, dev);
-
- {
- u16 mii_cmd;
- int mii_status = mdio_read(dev, phy_id, 1);
- mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
- mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
- if (mii_status != 0xffff && mii_status != 0x0000) {
- rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
- netdev_info(dev,
- "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
- phy_id,
- mii_status, rp->mii_if.advertising,
- mdio_read(dev, phy_id, 5));
-
- /* set IFF_RUNNING */
- if (mii_status & BMSR_LSTATUS)
- netif_carrier_on(dev);
- else
- netif_carrier_off(dev);
-
- }
- }
- rp->mii_if.phy_id = phy_id;
- if (debug > 1 && avoid_D3)
- netdev_info(dev, "No D3 power state at shutdown\n");
-
- return 0;
-
-err_out_unmap:
- pci_iounmap(pdev, ioaddr);
-err_out_free_res:
- pci_release_regions(pdev);
-err_out_free_netdev:
- free_netdev(dev);
-err_out:
- return rc;
-}
-
-static int alloc_ring(struct net_device* dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void *ring;
- dma_addr_t ring_dma;
-
- ring = pci_alloc_consistent(rp->pdev,
- RX_RING_SIZE * sizeof(struct rx_desc) +
- TX_RING_SIZE * sizeof(struct tx_desc),
- &ring_dma);
- if (!ring) {
- netdev_err(dev, "Could not allocate DMA memory\n");
- return -ENOMEM;
- }
- if (rp->quirks & rqRhineI) {
- rp->tx_bufs = pci_alloc_consistent(rp->pdev,
- PKT_BUF_SZ * TX_RING_SIZE,
- &rp->tx_bufs_dma);
- if (rp->tx_bufs == NULL) {
- pci_free_consistent(rp->pdev,
- RX_RING_SIZE * sizeof(struct rx_desc) +
- TX_RING_SIZE * sizeof(struct tx_desc),
- ring, ring_dma);
- return -ENOMEM;
- }
- }
-
- rp->rx_ring = ring;
- rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
- rp->rx_ring_dma = ring_dma;
- rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
-
- return 0;
-}
-
-static void free_ring(struct net_device* dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- pci_free_consistent(rp->pdev,
- RX_RING_SIZE * sizeof(struct rx_desc) +
- TX_RING_SIZE * sizeof(struct tx_desc),
- rp->rx_ring, rp->rx_ring_dma);
- rp->tx_ring = NULL;
-
- if (rp->tx_bufs)
- pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
- rp->tx_bufs, rp->tx_bufs_dma);
-
- rp->tx_bufs = NULL;
-
-}
-
-static void alloc_rbufs(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- dma_addr_t next;
- int i;
-
- rp->dirty_rx = rp->cur_rx = 0;
-
- rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
- rp->rx_head_desc = &rp->rx_ring[0];
- next = rp->rx_ring_dma;
-
- /* Init the ring entries */
- for (i = 0; i < RX_RING_SIZE; i++) {
- rp->rx_ring[i].rx_status = 0;
- rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
- next += sizeof(struct rx_desc);
- rp->rx_ring[i].next_desc = cpu_to_le32(next);
- rp->rx_skbuff[i] = NULL;
- }
- /* Mark the last entry as wrapping the ring. */
- rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
-
- /* Fill in the Rx buffers. Handle allocation failure gracefully. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
- rp->rx_skbuff[i] = skb;
- if (skb == NULL)
- break;
- skb->dev = dev; /* Mark as being used by this device. */
-
- rp->rx_skbuff_dma[i] =
- pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
-
- rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
- rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
- }
- rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
-}
-
-static void free_rbufs(struct net_device* dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int i;
-
- /* Free all the skbuffs in the Rx queue. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- rp->rx_ring[i].rx_status = 0;
- rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
- if (rp->rx_skbuff[i]) {
- pci_unmap_single(rp->pdev,
- rp->rx_skbuff_dma[i],
- rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
- dev_kfree_skb(rp->rx_skbuff[i]);
- }
- rp->rx_skbuff[i] = NULL;
- }
-}
-
-static void alloc_tbufs(struct net_device* dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- dma_addr_t next;
- int i;
-
- rp->dirty_tx = rp->cur_tx = 0;
- next = rp->tx_ring_dma;
- for (i = 0; i < TX_RING_SIZE; i++) {
- rp->tx_skbuff[i] = NULL;
- rp->tx_ring[i].tx_status = 0;
- rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
- next += sizeof(struct tx_desc);
- rp->tx_ring[i].next_desc = cpu_to_le32(next);
- if (rp->quirks & rqRhineI)
- rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
- }
- rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
-
-}
-
-static void free_tbufs(struct net_device* dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int i;
-
- for (i = 0; i < TX_RING_SIZE; i++) {
- rp->tx_ring[i].tx_status = 0;
- rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
- rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
- if (rp->tx_skbuff[i]) {
- if (rp->tx_skbuff_dma[i]) {
- pci_unmap_single(rp->pdev,
- rp->tx_skbuff_dma[i],
- rp->tx_skbuff[i]->len,
- PCI_DMA_TODEVICE);
- }
- dev_kfree_skb(rp->tx_skbuff[i]);
- }
- rp->tx_skbuff[i] = NULL;
- rp->tx_buf[i] = NULL;
- }
-}
-
-static void rhine_check_media(struct net_device *dev, unsigned int init_media)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- mii_check_media(&rp->mii_if, debug, init_media);
-
- if (rp->mii_if.full_duplex)
- iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
- ioaddr + ChipCmd1);
- else
- iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
- ioaddr + ChipCmd1);
- if (debug > 1)
- netdev_info(dev, "force_media %d, carrier %d\n",
- rp->mii_if.force_media, netif_carrier_ok(dev));
-}
-
-/* Called after status of force_media possibly changed */
-static void rhine_set_carrier(struct mii_if_info *mii)
-{
- if (mii->force_media) {
- /* autoneg is off: Link is always assumed to be up */
- if (!netif_carrier_ok(mii->dev))
- netif_carrier_on(mii->dev);
- }
- else /* Let MMI library update carrier status */
- rhine_check_media(mii->dev, 0);
- if (debug > 1)
- netdev_info(mii->dev, "force_media %d, carrier %d\n",
- mii->force_media, netif_carrier_ok(mii->dev));
-}
-
-/**
- * rhine_set_cam - set CAM multicast filters
- * @ioaddr: register block of this Rhine
- * @idx: multicast CAM index [0..MCAM_SIZE-1]
- * @addr: multicast address (6 bytes)
- *
- * Load addresses into multicast filters.
- */
-static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr)
-{
- int i;
-
- iowrite8(CAMC_CAMEN, ioaddr + CamCon);
- wmb();
-
- /* Paranoid -- idx out of range should never happen */
- idx &= (MCAM_SIZE - 1);
-
- iowrite8((u8) idx, ioaddr + CamAddr);
-
- for (i = 0; i < 6; i++, addr++)
- iowrite8(*addr, ioaddr + MulticastFilter0 + i);
- udelay(10);
- wmb();
-
- iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
- udelay(10);
-
- iowrite8(0, ioaddr + CamCon);
-}
-
-/**
- * rhine_set_vlan_cam - set CAM VLAN filters
- * @ioaddr: register block of this Rhine
- * @idx: VLAN CAM index [0..VCAM_SIZE-1]
- * @addr: VLAN ID (2 bytes)
- *
- * Load addresses into VLAN filters.
- */
-static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr)
-{
- iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
- wmb();
-
- /* Paranoid -- idx out of range should never happen */
- idx &= (VCAM_SIZE - 1);
-
- iowrite8((u8) idx, ioaddr + CamAddr);
-
- iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6);
- udelay(10);
- wmb();
-
- iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
- udelay(10);
-
- iowrite8(0, ioaddr + CamCon);
-}
-
-/**
- * rhine_set_cam_mask - set multicast CAM mask
- * @ioaddr: register block of this Rhine
- * @mask: multicast CAM mask
- *
- * Mask sets multicast filters active/inactive.
- */
-static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask)
-{
- iowrite8(CAMC_CAMEN, ioaddr + CamCon);
- wmb();
-
- /* write mask */
- iowrite32(mask, ioaddr + CamMask);
-
- /* disable CAMEN */
- iowrite8(0, ioaddr + CamCon);
-}
-
-/**
- * rhine_set_vlan_cam_mask - set VLAN CAM mask
- * @ioaddr: register block of this Rhine
- * @mask: VLAN CAM mask
- *
- * Mask sets VLAN filters active/inactive.
- */
-static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask)
-{
- iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
- wmb();
-
- /* write mask */
- iowrite32(mask, ioaddr + CamMask);
-
- /* disable CAMEN */
- iowrite8(0, ioaddr + CamCon);
-}
-
-/**
- * rhine_init_cam_filter - initialize CAM filters
- * @dev: network device
- *
- * Initialize (disable) hardware VLAN and multicast support on this
- * Rhine.
- */
-static void rhine_init_cam_filter(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- /* Disable all CAMs */
- rhine_set_vlan_cam_mask(ioaddr, 0);
- rhine_set_cam_mask(ioaddr, 0);
-
- /* disable hardware VLAN support */
- BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig);
- BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
-}
-
-/**
- * rhine_update_vcam - update VLAN CAM filters
- * @rp: rhine_private data of this Rhine
- *
- * Update VLAN CAM filters to match configuration change.
- */
-static void rhine_update_vcam(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- u16 vid;
- u32 vCAMmask = 0; /* 32 vCAMs (6105M and better) */
- unsigned int i = 0;
-
- for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) {
- rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid);
- vCAMmask |= 1 << i;
- if (++i >= VCAM_SIZE)
- break;
- }
- rhine_set_vlan_cam_mask(ioaddr, vCAMmask);
-}
-
-static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- spin_lock_irq(&rp->lock);
- set_bit(vid, rp->active_vlans);
- rhine_update_vcam(dev);
- spin_unlock_irq(&rp->lock);
-}
-
-static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- spin_lock_irq(&rp->lock);
- clear_bit(vid, rp->active_vlans);
- rhine_update_vcam(dev);
- spin_unlock_irq(&rp->lock);
-}
-
-static void init_registers(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- int i;
-
- for (i = 0; i < 6; i++)
- iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
-
- /* Initialize other registers. */
- iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
- /* Configure initial FIFO thresholds. */
- iowrite8(0x20, ioaddr + TxConfig);
- rp->tx_thresh = 0x20;
- rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
-
- iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
- iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
-
- rhine_set_rx_mode(dev);
-
- if (rp->pdev->revision >= VT6105M)
- rhine_init_cam_filter(dev);
-
- napi_enable(&rp->napi);
-
- /* Enable interrupts by setting the interrupt mask. */
- iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
- IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
- IntrTxDone | IntrTxError | IntrTxUnderrun |
- IntrPCIErr | IntrStatsMax | IntrLinkChange,
- ioaddr + IntrEnable);
-
- iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
- ioaddr + ChipCmd);
- rhine_check_media(dev, 1);
-}
-
-/* Enable MII link status auto-polling (required for IntrLinkChange) */
-static void rhine_enable_linkmon(void __iomem *ioaddr)
-{
- iowrite8(0, ioaddr + MIICmd);
- iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
- iowrite8(0x80, ioaddr + MIICmd);
-
- RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
-
- iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
-}
-
-/* Disable MII link status auto-polling (required for MDIO access) */
-static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
-{
- iowrite8(0, ioaddr + MIICmd);
-
- if (quirks & rqRhineI) {
- iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
-
- /* Can be called from ISR. Evil. */
- mdelay(1);
-
- /* 0x80 must be set immediately before turning it off */
- iowrite8(0x80, ioaddr + MIICmd);
-
- RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
-
- /* Heh. Now clear 0x80 again. */
- iowrite8(0, ioaddr + MIICmd);
- }
- else
- RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
-}
-
-/* Read and write over the MII Management Data I/O (MDIO) interface. */
-
-static int mdio_read(struct net_device *dev, int phy_id, int regnum)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- int result;
-
- rhine_disable_linkmon(ioaddr, rp->quirks);
-
- /* rhine_disable_linkmon already cleared MIICmd */
- iowrite8(phy_id, ioaddr + MIIPhyAddr);
- iowrite8(regnum, ioaddr + MIIRegAddr);
- iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
- RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
- result = ioread16(ioaddr + MIIData);
-
- rhine_enable_linkmon(ioaddr);
- return result;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- rhine_disable_linkmon(ioaddr, rp->quirks);
-
- /* rhine_disable_linkmon already cleared MIICmd */
- iowrite8(phy_id, ioaddr + MIIPhyAddr);
- iowrite8(regnum, ioaddr + MIIRegAddr);
- iowrite16(value, ioaddr + MIIData);
- iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
- RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
-
- rhine_enable_linkmon(ioaddr);
-}
-
-static int rhine_open(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- int rc;
-
- rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name,
- dev);
- if (rc)
- return rc;
-
- if (debug > 1)
- netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq);
-
- rc = alloc_ring(dev);
- if (rc) {
- free_irq(rp->pdev->irq, dev);
- return rc;
- }
- alloc_rbufs(dev);
- alloc_tbufs(dev);
- rhine_chip_reset(dev);
- init_registers(dev);
- if (debug > 2)
- netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n",
- __func__, ioread16(ioaddr + ChipCmd),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-static void rhine_reset_task(struct work_struct *work)
-{
- struct rhine_private *rp = container_of(work, struct rhine_private,
- reset_task);
- struct net_device *dev = rp->dev;
-
- /* protect against concurrent rx interrupts */
- disable_irq(rp->pdev->irq);
-
- napi_disable(&rp->napi);
-
- spin_lock_bh(&rp->lock);
-
- /* clear all descriptors */
- free_tbufs(dev);
- free_rbufs(dev);
- alloc_tbufs(dev);
- alloc_rbufs(dev);
-
- /* Reinitialize the hardware. */
- rhine_chip_reset(dev);
- init_registers(dev);
-
- spin_unlock_bh(&rp->lock);
- enable_irq(rp->pdev->irq);
-
- dev->trans_start = jiffies; /* prevent tx timeout */
- dev->stats.tx_errors++;
- netif_wake_queue(dev);
-}
-
-static void rhine_tx_timeout(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
- ioread16(ioaddr + IntrStatus),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
-
- schedule_work(&rp->reset_task);
-}
-
-static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- unsigned entry;
- unsigned long flags;
-
- /* Caution: the write order is important here, set the field
- with the "ownership" bits last. */
-
- /* Calculate the next Tx descriptor entry. */
- entry = rp->cur_tx % TX_RING_SIZE;
-
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
-
- rp->tx_skbuff[entry] = skb;
-
- if ((rp->quirks & rqRhineI) &&
- (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
- /* Must use alignment buffer. */
- if (skb->len > PKT_BUF_SZ) {
- /* packet too long, drop it */
- dev_kfree_skb(skb);
- rp->tx_skbuff[entry] = NULL;
- dev->stats.tx_dropped++;
- return NETDEV_TX_OK;
- }
-
- /* Padding is not copied and so must be redone. */
- skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
- if (skb->len < ETH_ZLEN)
- memset(rp->tx_buf[entry] + skb->len, 0,
- ETH_ZLEN - skb->len);
- rp->tx_skbuff_dma[entry] = 0;
- rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
- (rp->tx_buf[entry] -
- rp->tx_bufs));
- } else {
- rp->tx_skbuff_dma[entry] =
- pci_map_single(rp->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
- rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
- }
-
- rp->tx_ring[entry].desc_length =
- cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
-
- if (unlikely(vlan_tx_tag_present(skb))) {
- rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16);
- /* request tagging */
- rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000);
- }
- else
- rp->tx_ring[entry].tx_status = 0;
-
- /* lock eth irq */
- spin_lock_irqsave(&rp->lock, flags);
- wmb();
- rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
- wmb();
-
- rp->cur_tx++;
-
- /* Non-x86 Todo: explicitly flush cache lines here. */
-
- if (vlan_tx_tag_present(skb))
- /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
- BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
-
- /* Wake the potentially-idle transmit channel */
- iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
- ioaddr + ChipCmd1);
- IOSYNC;
-
- if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
- netif_stop_queue(dev);
-
- spin_unlock_irqrestore(&rp->lock, flags);
-
- if (debug > 4) {
- netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
- rp->cur_tx-1, entry);
- }
- return NETDEV_TX_OK;
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
- after the Tx thread. */
-static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
-{
- struct net_device *dev = dev_instance;
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- u32 intr_status;
- int boguscnt = max_interrupt_work;
- int handled = 0;
-
- while ((intr_status = get_intr_status(dev))) {
- handled = 1;
-
- /* Acknowledge all of the current interrupt sources ASAP. */
- if (intr_status & IntrTxDescRace)
- iowrite8(0x08, ioaddr + IntrStatus2);
- iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
- IOSYNC;
-
- if (debug > 4)
- netdev_dbg(dev, "Interrupt, status %08x\n",
- intr_status);
-
- if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
- IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
- iowrite16(IntrTxAborted |
- IntrTxDone | IntrTxError | IntrTxUnderrun |
- IntrPCIErr | IntrStatsMax | IntrLinkChange,
- ioaddr + IntrEnable);
-
- napi_schedule(&rp->napi);
- }
-
- if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
- if (intr_status & IntrTxErrSummary) {
- /* Avoid scavenging before Tx engine turned off */
- RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
- if (debug > 2 &&
- ioread8(ioaddr+ChipCmd) & CmdTxOn)
- netdev_warn(dev,
- "%s: Tx engine still on\n",
- __func__);
- }
- rhine_tx(dev);
- }
-
- /* Abnormal error summary/uncommon events handlers. */
- if (intr_status & (IntrPCIErr | IntrLinkChange |
- IntrStatsMax | IntrTxError | IntrTxAborted |
- IntrTxUnderrun | IntrTxDescRace))
- rhine_error(dev, intr_status);
-
- if (--boguscnt < 0) {
- netdev_warn(dev, "Too much work at interrupt, status=%#08x\n",
- intr_status);
- break;
- }
- }
-
- if (debug > 3)
- netdev_dbg(dev, "exiting interrupt, status=%08x\n",
- ioread16(ioaddr + IntrStatus));
- return IRQ_RETVAL(handled);
-}
-
-/* This routine is logically part of the interrupt handler, but isolated
- for clarity. */
-static void rhine_tx(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
-
- spin_lock(&rp->lock);
-
- /* find and cleanup dirty tx descriptors */
- while (rp->dirty_tx != rp->cur_tx) {
- txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
- if (debug > 6)
- netdev_dbg(dev, "Tx scavenge %d status %08x\n",
- entry, txstatus);
- if (txstatus & DescOwn)
- break;
- if (txstatus & 0x8000) {
- if (debug > 1)
- netdev_dbg(dev, "Transmit error, Tx status %08x\n",
- txstatus);
- dev->stats.tx_errors++;
- if (txstatus & 0x0400)
- dev->stats.tx_carrier_errors++;
- if (txstatus & 0x0200)
- dev->stats.tx_window_errors++;
- if (txstatus & 0x0100)
- dev->stats.tx_aborted_errors++;
- if (txstatus & 0x0080)
- dev->stats.tx_heartbeat_errors++;
- if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
- (txstatus & 0x0800) || (txstatus & 0x1000)) {
- dev->stats.tx_fifo_errors++;
- rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
- break; /* Keep the skb - we try again */
- }
- /* Transmitter restarted in 'abnormal' handler. */
- } else {
- if (rp->quirks & rqRhineI)
- dev->stats.collisions += (txstatus >> 3) & 0x0F;
- else
- dev->stats.collisions += txstatus & 0x0F;
- if (debug > 6)
- netdev_dbg(dev, "collisions: %1.1x:%1.1x\n",
- (txstatus >> 3) & 0xF,
- txstatus & 0xF);
- dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
- dev->stats.tx_packets++;
- }
- /* Free the original skb. */
- if (rp->tx_skbuff_dma[entry]) {
- pci_unmap_single(rp->pdev,
- rp->tx_skbuff_dma[entry],
- rp->tx_skbuff[entry]->len,
- PCI_DMA_TODEVICE);
- }
- dev_kfree_skb_irq(rp->tx_skbuff[entry]);
- rp->tx_skbuff[entry] = NULL;
- entry = (++rp->dirty_tx) % TX_RING_SIZE;
- }
- if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
- netif_wake_queue(dev);
-
- spin_unlock(&rp->lock);
-}
-
-/**
- * rhine_get_vlan_tci - extract TCI from Rx data buffer
- * @skb: pointer to sk_buff
- * @data_size: used data area of the buffer including CRC
- *
- * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
- * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
- * aligned following the CRC.
- */
-static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
-{
- u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
- return be16_to_cpup((__be16 *)trailer);
-}
-
-/* Process up to limit frames from receive ring */
-static int rhine_rx(struct net_device *dev, int limit)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int count;
- int entry = rp->cur_rx % RX_RING_SIZE;
-
- if (debug > 4) {
- netdev_dbg(dev, "%s(), entry %d status %08x\n",
- __func__, entry,
- le32_to_cpu(rp->rx_head_desc->rx_status));
- }
-
- /* If EOP is set on the next entry, it's a new packet. Send it up. */
- for (count = 0; count < limit; ++count) {
- struct rx_desc *desc = rp->rx_head_desc;
- u32 desc_status = le32_to_cpu(desc->rx_status);
- u32 desc_length = le32_to_cpu(desc->desc_length);
- int data_size = desc_status >> 16;
-
- if (desc_status & DescOwn)
- break;
-
- if (debug > 4)
- netdev_dbg(dev, "%s() status is %08x\n",
- __func__, desc_status);
-
- if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
- if ((desc_status & RxWholePkt) != RxWholePkt) {
- netdev_warn(dev,
- "Oversized Ethernet frame spanned multiple buffers, "
- "entry %#x length %d status %08x!\n",
- entry, data_size,
- desc_status);
- netdev_warn(dev,
- "Oversized Ethernet frame %p vs %p\n",
- rp->rx_head_desc,
- &rp->rx_ring[entry]);
- dev->stats.rx_length_errors++;
- } else if (desc_status & RxErr) {
- /* There was a error. */
- if (debug > 2)
- netdev_dbg(dev, "%s() Rx error was %08x\n",
- __func__, desc_status);
- dev->stats.rx_errors++;
- if (desc_status & 0x0030)
- dev->stats.rx_length_errors++;
- if (desc_status & 0x0048)
- dev->stats.rx_fifo_errors++;
- if (desc_status & 0x0004)
- dev->stats.rx_frame_errors++;
- if (desc_status & 0x0002) {
- /* this can also be updated outside the interrupt handler */
- spin_lock(&rp->lock);
- dev->stats.rx_crc_errors++;
- spin_unlock(&rp->lock);
- }
- }
- } else {
- struct sk_buff *skb = NULL;
- /* Length should omit the CRC */
- int pkt_len = data_size - 4;
- u16 vlan_tci = 0;
-
- /* Check if the packet is long enough to accept without
- copying to a minimally-sized skbuff. */
- if (pkt_len < rx_copybreak)
- skb = netdev_alloc_skb_ip_align(dev, pkt_len);
- if (skb) {
- pci_dma_sync_single_for_cpu(rp->pdev,
- rp->rx_skbuff_dma[entry],
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
-
- skb_copy_to_linear_data(skb,
- rp->rx_skbuff[entry]->data,
- pkt_len);
- skb_put(skb, pkt_len);
- pci_dma_sync_single_for_device(rp->pdev,
- rp->rx_skbuff_dma[entry],
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
- } else {
- skb = rp->rx_skbuff[entry];
- if (skb == NULL) {
- netdev_err(dev, "Inconsistent Rx descriptor chain\n");
- break;
- }
- rp->rx_skbuff[entry] = NULL;
- skb_put(skb, pkt_len);
- pci_unmap_single(rp->pdev,
- rp->rx_skbuff_dma[entry],
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
- }
-
- if (unlikely(desc_length & DescTag))
- vlan_tci = rhine_get_vlan_tci(skb, data_size);
-
- skb->protocol = eth_type_trans(skb, dev);
-
- if (unlikely(desc_length & DescTag))
- __vlan_hwaccel_put_tag(skb, vlan_tci);
- netif_receive_skb(skb);
- dev->stats.rx_bytes += pkt_len;
- dev->stats.rx_packets++;
- }
- entry = (++rp->cur_rx) % RX_RING_SIZE;
- rp->rx_head_desc = &rp->rx_ring[entry];
- }
-
- /* Refill the Rx ring buffers. */
- for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
- struct sk_buff *skb;
- entry = rp->dirty_rx % RX_RING_SIZE;
- if (rp->rx_skbuff[entry] == NULL) {
- skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
- rp->rx_skbuff[entry] = skb;
- if (skb == NULL)
- break; /* Better luck next round. */
- skb->dev = dev; /* Mark as being used by this device. */
- rp->rx_skbuff_dma[entry] =
- pci_map_single(rp->pdev, skb->data,
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
- rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
- }
- rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
- }
-
- return count;
-}
-
-/*
- * Clears the "tally counters" for CRC errors and missed frames(?).
- * It has been reported that some chips need a write of 0 to clear
- * these, for others the counters are set to 1 when written to and
- * instead cleared when read. So we clear them both ways ...
- */
-static inline void clear_tally_counters(void __iomem *ioaddr)
-{
- iowrite32(0, ioaddr + RxMissed);
- ioread16(ioaddr + RxCRCErrs);
- ioread16(ioaddr + RxMissed);
-}
-
-static void rhine_restart_tx(struct net_device *dev) {
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- int entry = rp->dirty_tx % TX_RING_SIZE;
- u32 intr_status;
-
- /*
- * If new errors occurred, we need to sort them out before doing Tx.
- * In that case the ISR will be back here RSN anyway.
- */
- intr_status = get_intr_status(dev);
-
- if ((intr_status & IntrTxErrSummary) == 0) {
-
- /* We know better than the chip where it should continue. */
- iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
- ioaddr + TxRingPtr);
-
- iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
- ioaddr + ChipCmd);
-
- if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000))
- /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
- BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
-
- iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
- ioaddr + ChipCmd1);
- IOSYNC;
- }
- else {
- /* This should never happen */
- if (debug > 1)
- netdev_warn(dev, "%s() Another error occurred %08x\n",
- __func__, intr_status);
- }
-
-}
-
-static void rhine_error(struct net_device *dev, int intr_status)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- spin_lock(&rp->lock);
-
- if (intr_status & IntrLinkChange)
- rhine_check_media(dev, 0);
- if (intr_status & IntrStatsMax) {
- dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
- dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
- clear_tally_counters(ioaddr);
- }
- if (intr_status & IntrTxAborted) {
- if (debug > 1)
- netdev_info(dev, "Abort %08x, frame dropped\n",
- intr_status);
- }
- if (intr_status & IntrTxUnderrun) {
- if (rp->tx_thresh < 0xE0)
- BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
- if (debug > 1)
- netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n",
- rp->tx_thresh);
- }
- if (intr_status & IntrTxDescRace) {
- if (debug > 2)
- netdev_info(dev, "Tx descriptor write-back race\n");
- }
- if ((intr_status & IntrTxError) &&
- (intr_status & (IntrTxAborted |
- IntrTxUnderrun | IntrTxDescRace)) == 0) {
- if (rp->tx_thresh < 0xE0) {
- BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
- }
- if (debug > 1)
- netdev_info(dev, "Unspecified error. Tx threshold now %02x\n",
- rp->tx_thresh);
- }
- if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
- IntrTxError))
- rhine_restart_tx(dev);
-
- if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
- IntrTxError | IntrTxAborted | IntrNormalSummary |
- IntrTxDescRace)) {
- if (debug > 1)
- netdev_err(dev, "Something Wicked happened! %08x\n",
- intr_status);
- }
-
- spin_unlock(&rp->lock);
-}
-
-static struct net_device_stats *rhine_get_stats(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- unsigned long flags;
-
- spin_lock_irqsave(&rp->lock, flags);
- dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
- dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
- clear_tally_counters(ioaddr);
- spin_unlock_irqrestore(&rp->lock, flags);
-
- return &dev->stats;
-}
-
-static void rhine_set_rx_mode(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
- u32 mc_filter[2]; /* Multicast hash filter */
- u8 rx_mode = 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */
- struct netdev_hw_addr *ha;
-
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- rx_mode = 0x1C;
- iowrite32(0xffffffff, ioaddr + MulticastFilter0);
- iowrite32(0xffffffff, ioaddr + MulticastFilter1);
- } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
- (dev->flags & IFF_ALLMULTI)) {
- /* Too many to match, or accept all multicasts. */
- iowrite32(0xffffffff, ioaddr + MulticastFilter0);
- iowrite32(0xffffffff, ioaddr + MulticastFilter1);
- } else if (rp->pdev->revision >= VT6105M) {
- int i = 0;
- u32 mCAMmask = 0; /* 32 mCAMs (6105M and better) */
- netdev_for_each_mc_addr(ha, dev) {
- if (i == MCAM_SIZE)
- break;
- rhine_set_cam(ioaddr, i, ha->addr);
- mCAMmask |= 1 << i;
- i++;
- }
- rhine_set_cam_mask(ioaddr, mCAMmask);
- } else {
- memset(mc_filter, 0, sizeof(mc_filter));
- netdev_for_each_mc_addr(ha, dev) {
- int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
-
- mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
- }
- iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
- iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
- }
- /* enable/disable VLAN receive filtering */
- if (rp->pdev->revision >= VT6105M) {
- if (dev->flags & IFF_PROMISC)
- BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
- else
- BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1);
- }
- BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig);
-}
-
-static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
- strcpy(info->bus_info, pci_name(rp->pdev));
-}
-
-static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int rc;
-
- spin_lock_irq(&rp->lock);
- rc = mii_ethtool_gset(&rp->mii_if, cmd);
- spin_unlock_irq(&rp->lock);
-
- return rc;
-}
-
-static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int rc;
-
- spin_lock_irq(&rp->lock);
- rc = mii_ethtool_sset(&rp->mii_if, cmd);
- spin_unlock_irq(&rp->lock);
- rhine_set_carrier(&rp->mii_if);
-
- return rc;
-}
-
-static int netdev_nway_reset(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- return mii_nway_restart(&rp->mii_if);
-}
-
-static u32 netdev_get_link(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- return mii_link_ok(&rp->mii_if);
-}
-
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
- return debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 value)
-{
- debug = value;
-}
-
-static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- if (!(rp->quirks & rqWOL))
- return;
-
- spin_lock_irq(&rp->lock);
- wol->supported = WAKE_PHY | WAKE_MAGIC |
- WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
- wol->wolopts = rp->wolopts;
- spin_unlock_irq(&rp->lock);
-}
-
-static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
- struct rhine_private *rp = netdev_priv(dev);
- u32 support = WAKE_PHY | WAKE_MAGIC |
- WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
-
- if (!(rp->quirks & rqWOL))
- return -EINVAL;
-
- if (wol->wolopts & ~support)
- return -EINVAL;
-
- spin_lock_irq(&rp->lock);
- rp->wolopts = wol->wolopts;
- spin_unlock_irq(&rp->lock);
-
- return 0;
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
- .get_settings = netdev_get_settings,
- .set_settings = netdev_set_settings,
- .nway_reset = netdev_nway_reset,
- .get_link = netdev_get_link,
- .get_msglevel = netdev_get_msglevel,
- .set_msglevel = netdev_set_msglevel,
- .get_wol = rhine_get_wol,
- .set_wol = rhine_set_wol,
-};
-
-static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct rhine_private *rp = netdev_priv(dev);
- int rc;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irq(&rp->lock);
- rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
- spin_unlock_irq(&rp->lock);
- rhine_set_carrier(&rp->mii_if);
-
- return rc;
-}
-
-static int rhine_close(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- napi_disable(&rp->napi);
- cancel_work_sync(&rp->reset_task);
- netif_stop_queue(dev);
-
- spin_lock_irq(&rp->lock);
-
- if (debug > 1)
- netdev_dbg(dev, "Shutting down ethercard, status was %04x\n",
- ioread16(ioaddr + ChipCmd));
-
- /* Switch to loopback mode to avoid hardware races. */
- iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
-
- /* Disable interrupts by clearing the interrupt mask. */
- iowrite16(0x0000, ioaddr + IntrEnable);
-
- /* Stop the chip's Tx and Rx processes. */
- iowrite16(CmdStop, ioaddr + ChipCmd);
-
- spin_unlock_irq(&rp->lock);
-
- free_irq(rp->pdev->irq, dev);
- free_rbufs(dev);
- free_tbufs(dev);
- free_ring(dev);
-
- return 0;
-}
-
-
-static void __devexit rhine_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rhine_private *rp = netdev_priv(dev);
-
- unregister_netdev(dev);
-
- pci_iounmap(pdev, rp->base);
- pci_release_regions(pdev);
-
- free_netdev(dev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
-}
-
-static void rhine_shutdown (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- if (!(rp->quirks & rqWOL))
- return; /* Nothing to do for non-WOL adapters */
-
- rhine_power_init(dev);
-
- /* Make sure we use pattern 0, 1 and not 4, 5 */
- if (rp->quirks & rq6patterns)
- iowrite8(0x04, ioaddr + WOLcgClr);
-
- if (rp->wolopts & WAKE_MAGIC) {
- iowrite8(WOLmagic, ioaddr + WOLcrSet);
- /*
- * Turn EEPROM-controlled wake-up back on -- some hardware may
- * not cooperate otherwise.
- */
- iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
- }
-
- if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
- iowrite8(WOLbmcast, ioaddr + WOLcgSet);
-
- if (rp->wolopts & WAKE_PHY)
- iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
-
- if (rp->wolopts & WAKE_UCAST)
- iowrite8(WOLucast, ioaddr + WOLcrSet);
-
- if (rp->wolopts) {
- /* Enable legacy WOL (for old motherboards) */
- iowrite8(0x01, ioaddr + PwcfgSet);
- iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
- }
-
- /* Hit power state D3 (sleep) */
- if (!avoid_D3)
- iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
-
- /* TODO: Check use of pci_enable_wake() */
-
-}
-
-#ifdef CONFIG_PM
-static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rhine_private *rp = netdev_priv(dev);
- unsigned long flags;
-
- if (!netif_running(dev))
- return 0;
-
- napi_disable(&rp->napi);
-
- netif_device_detach(dev);
- pci_save_state(pdev);
-
- spin_lock_irqsave(&rp->lock, flags);
- rhine_shutdown(pdev);
- spin_unlock_irqrestore(&rp->lock, flags);
-
- free_irq(dev->irq, dev);
- return 0;
-}
-
-static int rhine_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rhine_private *rp = netdev_priv(dev);
- unsigned long flags;
- int ret;
-
- if (!netif_running(dev))
- return 0;
-
- if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
- netdev_err(dev, "request_irq failed\n");
-
- ret = pci_set_power_state(pdev, PCI_D0);
- if (debug > 1)
- netdev_info(dev, "Entering power state D0 %s (%d)\n",
- ret ? "failed" : "succeeded", ret);
-
- pci_restore_state(pdev);
-
- spin_lock_irqsave(&rp->lock, flags);
-#ifdef USE_MMIO
- enable_mmio(rp->pioaddr, rp->quirks);
-#endif
- rhine_power_init(dev);
- free_tbufs(dev);
- free_rbufs(dev);
- alloc_tbufs(dev);
- alloc_rbufs(dev);
- init_registers(dev);
- spin_unlock_irqrestore(&rp->lock, flags);
-
- netif_device_attach(dev);
-
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static struct pci_driver rhine_driver = {
- .name = DRV_NAME,
- .id_table = rhine_pci_tbl,
- .probe = rhine_init_one,
- .remove = __devexit_p(rhine_remove_one),
-#ifdef CONFIG_PM
- .suspend = rhine_suspend,
- .resume = rhine_resume,
-#endif /* CONFIG_PM */
- .shutdown = rhine_shutdown,
-};
-
-static struct dmi_system_id __initdata rhine_dmi_table[] = {
- {
- .ident = "EPIA-M",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
- DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
- },
- },
- {
- .ident = "KV7",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
- DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
- },
- },
- { NULL }
-};
-
-static int __init rhine_init(void)
-{
-/* when a module, this is printed whether or not devices are found in probe */
-#ifdef MODULE
- pr_info("%s\n", version);
-#endif
- if (dmi_check_system(rhine_dmi_table)) {
- /* these BIOSes fail at PXE boot if chip is in D3 */
- avoid_D3 = 1;
- pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
- }
- else if (avoid_D3)
- pr_info("avoid_D3 set\n");
-
- return pci_register_driver(&rhine_driver);
-}
-
-
-static void __exit rhine_cleanup(void)
-{
- pci_unregister_driver(&rhine_driver);
-}
-
-
-module_init(rhine_init);
-module_exit(rhine_cleanup);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
deleted file mode 100644
index 490ec5b2775a..000000000000
--- a/drivers/net/via-velocity.c
+++ /dev/null
@@ -1,3592 +0,0 @@
-/*
- * This code is derived from the VIA reference driver (copyright message
- * below) provided to Red Hat by VIA Networking Technologies, Inc. for
- * addition to the Linux kernel.
- *
- * The code has been merged into one source file, cleaned up to follow
- * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned
- * for 64bit hardware platforms.
- *
- * TODO
- * rx_copybreak/alignment
- * More testing
- *
- * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk>
- * Additional fixes and clean up: Francois Romieu
- *
- * This source has not been verified for use in safety critical systems.
- *
- * Please direct queries about the revamped driver to the linux-kernel
- * list not VIA.
- *
- * Original code:
- *
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * This software may be redistributed and/or modified under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * Author: Chuang Liang-Shing, AJ Jiang
- *
- * Date: Jan 24, 2003
- *
- * MODULE_LICENSE("GPL");
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/io.h>
-#include <linux/if.h>
-#include <linux/uaccess.h>
-#include <linux/proc_fs.h>
-#include <linux/inetdevice.h>
-#include <linux/reboot.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/in.h>
-#include <linux/if_arp.h>
-#include <linux/if_vlan.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/udp.h>
-#include <linux/crc-ccitt.h>
-#include <linux/crc32.h>
-
-#include "via-velocity.h"
-
-
-static int velocity_nics;
-static int msglevel = MSG_LEVEL_INFO;
-
-/**
- * mac_get_cam_mask - Read a CAM mask
- * @regs: register block for this velocity
- * @mask: buffer to store mask
- *
- * Fetch the mask bits of the selected CAM and store them into the
- * provided mask buffer.
- */
-static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- writeb(0, ®s->CAMADDR);
-
- /* read mask */
- for (i = 0; i < 8; i++)
- *mask++ = readb(&(regs->MARCAM[i]));
-
- /* disable CAMEN */
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-/**
- * mac_set_cam_mask - Set a CAM mask
- * @regs: register block for this velocity
- * @mask: CAM mask to load
- *
- * Store a new mask into a CAM
- */
-static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
-{
- int i;
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- writeb(CAMADDR_CAMEN, ®s->CAMADDR);
-
- for (i = 0; i < 8; i++)
- writeb(*mask++, &(regs->MARCAM[i]));
-
- /* disable CAMEN */
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
-{
- int i;
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR);
-
- for (i = 0; i < 8; i++)
- writeb(*mask++, &(regs->MARCAM[i]));
-
- /* disable CAMEN */
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-/**
- * mac_set_cam - set CAM data
- * @regs: register block of this velocity
- * @idx: Cam index
- * @addr: 2 or 6 bytes of CAM data
- *
- * Load an address or vlan tag into a CAM
- */
-static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- idx &= (64 - 1);
-
- writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR);
-
- for (i = 0; i < 6; i++)
- writeb(*addr++, &(regs->MARCAM[i]));
-
- BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
-
- udelay(10);
-
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
- const u8 *addr)
-{
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- idx &= (64 - 1);
-
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR);
- writew(*((u16 *) addr), ®s->MARCAM[0]);
-
- BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
-
- udelay(10);
-
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-
-/**
- * mac_wol_reset - reset WOL after exiting low power
- * @regs: register block of this velocity
- *
- * Called after we drop out of wake on lan mode in order to
- * reset the Wake on lan features. This function doesn't restore
- * the rest of the logic from the result of sleep/wakeup
- */
-static void mac_wol_reset(struct mac_regs __iomem *regs)
-{
-
- /* Turn off SWPTAG right after leaving power mode */
- BYTE_REG_BITS_OFF(STICKHW_SWPTAG, ®s->STICKHW);
- /* clear sticky bits */
- BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
-
- BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, ®s->CHIPGCR);
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
- /* disable force PME-enable */
- writeb(WOLCFG_PMEOVR, ®s->WOLCFGClr);
- /* disable power-event config bit */
- writew(0xFFFF, ®s->WOLCRClr);
- /* clear power status */
- writew(0xFFFF, ®s->WOLSRClr);
-}
-
-static const struct ethtool_ops velocity_ethtool_ops;
-
-/*
- Define module options
-*/
-
-MODULE_AUTHOR("VIA Networking Technologies, Inc.");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
-
-#define VELOCITY_PARAM(N, D) \
- static int N[MAX_UNITS] = OPTION_DEFAULT;\
- module_param_array(N, int, NULL, 0); \
- MODULE_PARM_DESC(N, D);
-
-#define RX_DESC_MIN 64
-#define RX_DESC_MAX 255
-#define RX_DESC_DEF 64
-VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors");
-
-#define TX_DESC_MIN 16
-#define TX_DESC_MAX 256
-#define TX_DESC_DEF 64
-VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
-
-#define RX_THRESH_MIN 0
-#define RX_THRESH_MAX 3
-#define RX_THRESH_DEF 0
-/* rx_thresh[] is used for controlling the receive fifo threshold.
- 0: indicate the rxfifo threshold is 128 bytes.
- 1: indicate the rxfifo threshold is 512 bytes.
- 2: indicate the rxfifo threshold is 1024 bytes.
- 3: indicate the rxfifo threshold is store & forward.
-*/
-VELOCITY_PARAM(rx_thresh, "Receive fifo threshold");
-
-#define DMA_LENGTH_MIN 0
-#define DMA_LENGTH_MAX 7
-#define DMA_LENGTH_DEF 6
-
-/* DMA_length[] is used for controlling the DMA length
- 0: 8 DWORDs
- 1: 16 DWORDs
- 2: 32 DWORDs
- 3: 64 DWORDs
- 4: 128 DWORDs
- 5: 256 DWORDs
- 6: SF(flush till emply)
- 7: SF(flush till emply)
-*/
-VELOCITY_PARAM(DMA_length, "DMA length");
-
-#define IP_ALIG_DEF 0
-/* IP_byte_align[] is used for IP header DWORD byte aligned
- 0: indicate the IP header won't be DWORD byte aligned.(Default) .
- 1: indicate the IP header will be DWORD byte aligned.
- In some environment, the IP header should be DWORD byte aligned,
- or the packet will be droped when we receive it. (eg: IPVS)
-*/
-VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
-
-#define FLOW_CNTL_DEF 1
-#define FLOW_CNTL_MIN 1
-#define FLOW_CNTL_MAX 5
-
-/* flow_control[] is used for setting the flow control ability of NIC.
- 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
- 2: enable TX flow control.
- 3: enable RX flow control.
- 4: enable RX/TX flow control.
- 5: disable
-*/
-VELOCITY_PARAM(flow_control, "Enable flow control ability");
-
-#define MED_LNK_DEF 0
-#define MED_LNK_MIN 0
-#define MED_LNK_MAX 5
-/* speed_duplex[] is used for setting the speed and duplex mode of NIC.
- 0: indicate autonegotiation for both speed and duplex mode
- 1: indicate 100Mbps half duplex mode
- 2: indicate 100Mbps full duplex mode
- 3: indicate 10Mbps half duplex mode
- 4: indicate 10Mbps full duplex mode
- 5: indicate 1000Mbps full duplex mode
-
- Note:
- if EEPROM have been set to the force mode, this option is ignored
- by driver.
-*/
-VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
-
-#define VAL_PKT_LEN_DEF 0
-/* ValPktLen[] is used for setting the checksum offload ability of NIC.
- 0: Receive frame with invalid layer 2 length (Default)
- 1: Drop frame with invalid layer 2 length
-*/
-VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
-
-#define WOL_OPT_DEF 0
-#define WOL_OPT_MIN 0
-#define WOL_OPT_MAX 7
-/* wol_opts[] is used for controlling wake on lan behavior.
- 0: Wake up if recevied a magic packet. (Default)
- 1: Wake up if link status is on/off.
- 2: Wake up if recevied an arp packet.
- 4: Wake up if recevied any unicast packet.
- Those value can be sumed up to support more than one option.
-*/
-VELOCITY_PARAM(wol_opts, "Wake On Lan options");
-
-static int rx_copybreak = 200;
-module_param(rx_copybreak, int, 0644);
-MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
-
-/*
- * Internal board variants. At the moment we have only one
- */
-static struct velocity_info_tbl chip_info_table[] = {
- {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
- { }
-};
-
-/*
- * Describe the PCI device identifiers that we support in this
- * device driver. Used for hotplug autoloading.
- */
-static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
- { }
-};
-
-MODULE_DEVICE_TABLE(pci, velocity_id_table);
-
-/**
- * get_chip_name - identifier to name
- * @id: chip identifier
- *
- * Given a chip identifier return a suitable description. Returns
- * a pointer a static string valid while the driver is loaded.
- */
-static const char __devinit *get_chip_name(enum chip_type chip_id)
-{
- int i;
- for (i = 0; chip_info_table[i].name != NULL; i++)
- if (chip_info_table[i].chip_id == chip_id)
- break;
- return chip_info_table[i].name;
-}
-
-/**
- * velocity_remove1 - device unplug
- * @pdev: PCI device being removed
- *
- * Device unload callback. Called on an unplug or on module
- * unload for each active device that is present. Disconnects
- * the device from the network layer and frees all the resources
- */
-static void __devexit velocity_remove1(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
-
- unregister_netdev(dev);
- iounmap(vptr->mac_regs);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
- free_netdev(dev);
-
- velocity_nics--;
-}
-
-/**
- * velocity_set_int_opt - parser for integer options
- * @opt: pointer to option value
- * @val: value the user requested (or -1 for default)
- * @min: lowest value allowed
- * @max: highest value allowed
- * @def: default value
- * @name: property name
- * @dev: device name
- *
- * Set an integer property in the module options. This function does
- * all the verification and checking as well as reporting so that
- * we don't duplicate code for each option.
- */
-static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
-{
- if (val == -1)
- *opt = def;
- else if (val < min || val > max) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
- devname, name, min, max);
- *opt = def;
- } else {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
- devname, name, val);
- *opt = val;
- }
-}
-
-/**
- * velocity_set_bool_opt - parser for boolean options
- * @opt: pointer to option value
- * @val: value the user requested (or -1 for default)
- * @def: default value (yes/no)
- * @flag: numeric value to set for true.
- * @name: property name
- * @dev: device name
- *
- * Set a boolean property in the module options. This function does
- * all the verification and checking as well as reporting so that
- * we don't duplicate code for each option.
- */
-static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname)
-{
- (*opt) &= (~flag);
- if (val == -1)
- *opt |= (def ? flag : 0);
- else if (val < 0 || val > 1) {
- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
- devname, name);
- *opt |= (def ? flag : 0);
- } else {
- printk(KERN_INFO "%s: set parameter %s to %s\n",
- devname, name, val ? "TRUE" : "FALSE");
- *opt |= (val ? flag : 0);
- }
-}
-
-/**
- * velocity_get_options - set options on device
- * @opts: option structure for the device
- * @index: index of option to use in module options array
- * @devname: device name
- *
- * Turn the module and command options into a single structure
- * for the current device
- */
-static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
-{
-
- velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
- velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
- velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
- velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
-
- velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
- velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
- velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
- velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
- velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
- opts->numrx = (opts->numrx & ~3);
-}
-
-/**
- * velocity_init_cam_filter - initialise CAM
- * @vptr: velocity to program
- *
- * Initialize the content addressable memory used for filters. Load
- * appropriately according to the presence of VLAN
- */
-static void velocity_init_cam_filter(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- unsigned int vid, i = 0;
-
- /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
- WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
- WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG);
-
- /* Disable all CAMs */
- memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
- memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
- mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
- mac_set_cam_mask(regs, vptr->mCAMmask);
-
- /* Enable VCAMs */
-
- if (test_bit(0, vptr->active_vlans))
- WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
-
- for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
- mac_set_vlan_cam(regs, i, (u8 *) &vid);
- vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
- if (++i >= VCAM_SIZE)
- break;
- }
- mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
-}
-
-static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- spin_lock_irq(&vptr->lock);
- set_bit(vid, vptr->active_vlans);
- velocity_init_cam_filter(vptr);
- spin_unlock_irq(&vptr->lock);
-}
-
-static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- spin_lock_irq(&vptr->lock);
- clear_bit(vid, vptr->active_vlans);
- velocity_init_cam_filter(vptr);
- spin_unlock_irq(&vptr->lock);
-}
-
-static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
-{
- vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
-}
-
-/**
- * velocity_rx_reset - handle a receive reset
- * @vptr: velocity we are resetting
- *
- * Reset the ownership and status for the receive ring side.
- * Hand all the receive queue to the NIC.
- */
-static void velocity_rx_reset(struct velocity_info *vptr)
-{
-
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int i;
-
- velocity_init_rx_ring_indexes(vptr);
-
- /*
- * Init state, all RD entries belong to the NIC
- */
- for (i = 0; i < vptr->options.numrx; ++i)
- vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
-
- writew(vptr->options.numrx, ®s->RBRDU);
- writel(vptr->rx.pool_dma, ®s->RDBaseLo);
- writew(0, ®s->RDIdx);
- writew(vptr->options.numrx - 1, ®s->RDCSize);
-}
-
-/**
- * velocity_get_opt_media_mode - get media selection
- * @vptr: velocity adapter
- *
- * Get the media mode stored in EEPROM or module options and load
- * mii_status accordingly. The requested link state information
- * is also returned.
- */
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
-{
- u32 status = 0;
-
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_AUTO:
- status = VELOCITY_AUTONEG_ENABLE;
- break;
- case SPD_DPX_100_FULL:
- status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_10_FULL:
- status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_100_HALF:
- status = VELOCITY_SPEED_100;
- break;
- case SPD_DPX_10_HALF:
- status = VELOCITY_SPEED_10;
- break;
- case SPD_DPX_1000_FULL:
- status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
- break;
- }
- vptr->mii_status = status;
- return status;
-}
-
-/**
- * safe_disable_mii_autopoll - autopoll off
- * @regs: velocity registers
- *
- * Turn off the autopoll and wait for it to disable on the chip
- */
-static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
-{
- u16 ww;
-
- /* turn off MAUTO */
- writeb(0, ®s->MIICR);
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-}
-
-/**
- * enable_mii_autopoll - turn on autopolling
- * @regs: velocity registers
- *
- * Enable the MII link status autopoll feature on the Velocity
- * hardware. Wait for it to enable.
- */
-static void enable_mii_autopoll(struct mac_regs __iomem *regs)
-{
- int ii;
-
- writeb(0, &(regs->MIICR));
- writeb(MIIADR_SWMPL, ®s->MIIADR);
-
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-
- writeb(MIICR_MAUTO, ®s->MIICR);
-
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-
-}
-
-/**
- * velocity_mii_read - read MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: buffer for received data
- *
- * Perform a single read of an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
-static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
-{
- u16 ww;
-
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
- safe_disable_mii_autopoll(regs);
-
- writeb(index, ®s->MIIADR);
-
- BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR);
-
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- if (!(readb(®s->MIICR) & MIICR_RCMD))
- break;
- }
-
- *data = readw(®s->MIIDATA);
-
- enable_mii_autopoll(regs);
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
-
-/**
- * mii_check_media_mode - check media state
- * @regs: velocity registers
- *
- * Check the current MII status and determine the link status
- * accordingly
- */
-static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
-{
- u32 status = 0;
- u16 ANAR;
-
- if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs))
- status |= VELOCITY_LINK_FAIL;
-
- if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs))
- status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
- else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs))
- status |= (VELOCITY_SPEED_1000);
- else {
- velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
- if (ANAR & ADVERTISE_100FULL)
- status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
- else if (ANAR & ADVERTISE_100HALF)
- status |= VELOCITY_SPEED_100;
- else if (ANAR & ADVERTISE_10FULL)
- status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
- else
- status |= (VELOCITY_SPEED_10);
- }
-
- if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
- velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
- if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
- == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
- if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
- }
-
- return status;
-}
-
-/**
- * velocity_mii_write - write MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: 16bit data for the MII register
- *
- * Perform a single write to an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
-static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
-{
- u16 ww;
-
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
- safe_disable_mii_autopoll(regs);
-
- /* MII reg offset */
- writeb(mii_addr, ®s->MIIADR);
- /* set MII data */
- writew(data, ®s->MIIDATA);
-
- /* turn on MIICR_WCMD */
- BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR);
-
- /* W_MAX_TIMEOUT is the timeout period */
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(5);
- if (!(readb(®s->MIICR) & MIICR_WCMD))
- break;
- }
- enable_mii_autopoll(regs);
-
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
-
-/**
- * set_mii_flow_control - flow control setup
- * @vptr: velocity interface
- *
- * Set up the flow control on this interface according to
- * the supplied user/eeprom options.
- */
-static void set_mii_flow_control(struct velocity_info *vptr)
-{
- /*Enable or Disable PAUSE in ANAR */
- switch (vptr->options.flow_cntl) {
- case FLOW_CNTL_TX:
- MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
- MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_RX:
- MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
- MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_TX_RX:
- MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
- MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_DISABLE:
- MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
- MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
- break;
- default:
- break;
- }
-}
-
-/**
- * mii_set_auto_on - autonegotiate on
- * @vptr: velocity
- *
- * Enable autonegotation on this interface
- */
-static void mii_set_auto_on(struct velocity_info *vptr)
-{
- if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs))
- MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
- else
- MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs);
-}
-
-static u32 check_connection_type(struct mac_regs __iomem *regs)
-{
- u32 status = 0;
- u8 PHYSR0;
- u16 ANAR;
- PHYSR0 = readb(®s->PHYSR0);
-
- /*
- if (!(PHYSR0 & PHYSR0_LINKGD))
- status|=VELOCITY_LINK_FAIL;
- */
-
- if (PHYSR0 & PHYSR0_FDPX)
- status |= VELOCITY_DUPLEX_FULL;
-
- if (PHYSR0 & PHYSR0_SPDG)
- status |= VELOCITY_SPEED_1000;
- else if (PHYSR0 & PHYSR0_SPD10)
- status |= VELOCITY_SPEED_10;
- else
- status |= VELOCITY_SPEED_100;
-
- if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
- velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
- if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
- == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
- if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
- }
-
- return status;
-}
-
-/**
- * velocity_set_media_mode - set media mode
- * @mii_status: old MII link state
- *
- * Check the media link state and configure the flow control
- * PHY and also velocity hardware setup accordingly. In particular
- * we need to set up CD polling and frame bursting.
- */
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
-{
- u32 curr_status;
- struct mac_regs __iomem *regs = vptr->mac_regs;
-
- vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
- curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
-
- /* Set mii link status */
- set_mii_flow_control(vptr);
-
- /*
- Check if new status is consistent with current status
- if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
- (mii_status==curr_status)) {
- vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
- vptr->mii_status=check_connection_type(vptr->mac_regs);
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
- return 0;
- }
- */
-
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
-
- /*
- * If connection type is AUTO
- */
- if (mii_status & VELOCITY_AUTONEG_ENABLE) {
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
- /* clear force MAC mode bit */
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
- /* set duplex mode of MAC according to duplex mode of MII */
- MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs);
- MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
- MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs);
-
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- } else {
- u16 CTRL1000;
- u16 ANAR;
- u8 CHIPGCR;
-
- /*
- * 1. if it's 3119, disable frame bursting in halfduplex mode
- * and enable it in fullduplex mode
- * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
- * 3. only enable CD heart beat counter in 10HD mode
- */
-
- /* set force MAC mode bit */
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
-
- CHIPGCR = readb(®s->CHIPGCR);
-
- if (mii_status & VELOCITY_SPEED_1000)
- CHIPGCR |= CHIPGCR_FCGMII;
- else
- CHIPGCR &= ~CHIPGCR_FCGMII;
-
- if (mii_status & VELOCITY_DUPLEX_FULL) {
- CHIPGCR |= CHIPGCR_FCFDX;
- writeb(CHIPGCR, ®s->CHIPGCR);
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
- } else {
- CHIPGCR &= ~CHIPGCR_FCFDX;
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
- writeb(CHIPGCR, ®s->CHIPGCR);
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
- }
-
- velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000);
- CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
- if ((mii_status & VELOCITY_SPEED_1000) &&
- (mii_status & VELOCITY_DUPLEX_FULL)) {
- CTRL1000 |= ADVERTISE_1000FULL;
- }
- velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000);
-
- if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
- else
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
-
- /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */
- velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR);
- ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF));
- if (mii_status & VELOCITY_SPEED_100) {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ADVERTISE_100FULL;
- else
- ANAR |= ADVERTISE_100HALF;
- } else if (mii_status & VELOCITY_SPEED_10) {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ADVERTISE_10FULL;
- else
- ANAR |= ADVERTISE_10HALF;
- }
- velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR);
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */
- }
- /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
- /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
- return VELOCITY_LINK_CHANGE;
-}
-
-/**
- * velocity_print_link_status - link status reporting
- * @vptr: velocity to report on
- *
- * Turn the link status of the velocity card into a kernel log
- * description of the new link state, detailing speed and duplex
- * status
- */
-static void velocity_print_link_status(struct velocity_info *vptr)
-{
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
- } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
- else if (vptr->mii_status & VELOCITY_SPEED_100)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
-
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
- } else {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_1000_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps full duplex\n");
- break;
- case SPD_DPX_100_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
- break;
- case SPD_DPX_100_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
- break;
- case SPD_DPX_10_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
- break;
- case SPD_DPX_10_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
- break;
- default:
- break;
- }
- }
-}
-
-/**
- * enable_flow_control_ability - flow control
- * @vptr: veloity to configure
- *
- * Set up flow control according to the flow control options
- * determined by the eeprom/configuration.
- */
-static void enable_flow_control_ability(struct velocity_info *vptr)
-{
-
- struct mac_regs __iomem *regs = vptr->mac_regs;
-
- switch (vptr->options.flow_cntl) {
-
- case FLOW_CNTL_DEFAULT:
- if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0))
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- else
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
-
- if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0))
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- else
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_TX:
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_RX:
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_TX_RX:
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- break;
-
- case FLOW_CNTL_DISABLE:
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- default:
- break;
- }
-
-}
-
-/**
- * velocity_soft_reset - soft reset
- * @vptr: velocity to reset
- *
- * Kick off a soft reset of the velocity adapter and then poll
- * until the reset sequence has completed before returning.
- */
-static int velocity_soft_reset(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int i = 0;
-
- writel(CR0_SFRST, ®s->CR0Set);
-
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
- udelay(5);
- if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set))
- break;
- }
-
- if (i == W_MAX_TIMEOUT) {
- writel(CR0_FORSRST, ®s->CR0Set);
- /* FIXME: PCI POSTING */
- /* delay 2ms */
- mdelay(2);
- }
- return 0;
-}
-
-/**
- * velocity_set_multi - filter list change callback
- * @dev: network device
- *
- * Called by the network layer when the filter lists need to change
- * for a velocity adapter. Reload the CAMs with the new address
- * filter ruleset.
- */
-static void velocity_set_multi(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u8 rx_mode;
- int i;
- struct netdev_hw_addr *ha;
-
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, ®s->MARCAM[0]);
- writel(0xffffffff, ®s->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
- } else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
- (dev->flags & IFF_ALLMULTI)) {
- writel(0xffffffff, ®s->MARCAM[0]);
- writel(0xffffffff, ®s->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB);
- } else {
- int offset = MCAM_SIZE - vptr->multicast_limit;
- mac_get_cam_mask(regs, vptr->mCAMmask);
-
- i = 0;
- netdev_for_each_mc_addr(ha, dev) {
- mac_set_cam(regs, i + offset, ha->addr);
- vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
- i++;
- }
-
- mac_set_cam_mask(regs, vptr->mCAMmask);
- rx_mode = RCR_AM | RCR_AB | RCR_AP;
- }
- if (dev->mtu > 1500)
- rx_mode |= RCR_AL;
-
- BYTE_REG_BITS_ON(rx_mode, ®s->RCR);
-
-}
-
-/*
- * MII access , media link mode setting functions
- */
-
-/**
- * mii_init - set up MII
- * @vptr: velocity adapter
- * @mii_status: links tatus
- *
- * Set up the PHY for the current link state.
- */
-static void mii_init(struct velocity_info *vptr, u32 mii_status)
-{
- u16 BMCR;
-
- switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
- case PHYID_CICADA_CS8201:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue.
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
- /*
- * Turn on Link/Activity LED enable bit for CIS8201
- */
- MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
- break;
- case PHYID_VT3216_32BIT:
- case PHYID_VT3216_64BIT:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
- break;
-
- case PHYID_MARVELL_1000:
- case PHYID_MARVELL_1000S:
- /*
- * Assert CRS on Transmit
- */
- MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
- break;
- default:
- ;
- }
- velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR);
- if (BMCR & BMCR_ISOLATE) {
- BMCR &= ~BMCR_ISOLATE;
- velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR);
- }
-}
-
-/**
- * setup_queue_timers - Setup interrupt timers
- *
- * Setup interrupt frequency during suppression (timeout if the frame
- * count isn't filled).
- */
-static void setup_queue_timers(struct velocity_info *vptr)
-{
- /* Only for newer revisions */
- if (vptr->rev_id >= REV_ID_VT3216_A0) {
- u8 txqueue_timer = 0;
- u8 rxqueue_timer = 0;
-
- if (vptr->mii_status & (VELOCITY_SPEED_1000 |
- VELOCITY_SPEED_100)) {
- txqueue_timer = vptr->options.txqueue_timer;
- rxqueue_timer = vptr->options.rxqueue_timer;
- }
-
- writeb(txqueue_timer, &vptr->mac_regs->TQETMR);
- writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
- }
-}
-
-/**
- * setup_adaptive_interrupts - Setup interrupt suppression
- *
- * @vptr velocity adapter
- *
- * The velocity is able to suppress interrupt during high interrupt load.
- * This function turns on that feature.
- */
-static void setup_adaptive_interrupts(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u16 tx_intsup = vptr->options.tx_intsup;
- u16 rx_intsup = vptr->options.rx_intsup;
-
- /* Setup default interrupt mask (will be changed below) */
- vptr->int_mask = INT_MASK_DEF;
-
- /* Set Tx Interrupt Suppression Threshold */
- writeb(CAMCR_PS0, ®s->CAMCR);
- if (tx_intsup != 0) {
- vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I |
- ISR_PTX2I | ISR_PTX3I);
- writew(tx_intsup, ®s->ISRCTL);
- } else
- writew(ISRCTL_TSUPDIS, ®s->ISRCTL);
-
- /* Set Rx Interrupt Suppression Threshold */
- writeb(CAMCR_PS1, ®s->CAMCR);
- if (rx_intsup != 0) {
- vptr->int_mask &= ~ISR_PRXI;
- writew(rx_intsup, ®s->ISRCTL);
- } else
- writew(ISRCTL_RSUPDIS, ®s->ISRCTL);
-
- /* Select page to interrupt hold timer */
- writeb(0, ®s->CAMCR);
-}
-
-/**
- * velocity_init_registers - initialise MAC registers
- * @vptr: velocity to init
- * @type: type of initialisation (hot or cold)
- *
- * Initialise the MAC on a reset or on first set up on the
- * hardware.
- */
-static void velocity_init_registers(struct velocity_info *vptr,
- enum velocity_init_type type)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int i, mii_status;
-
- mac_wol_reset(regs);
-
- switch (type) {
- case VELOCITY_INIT_RESET:
- case VELOCITY_INIT_WOL:
-
- netif_stop_queue(vptr->dev);
-
- /*
- * Reset RX to prevent RX pointer not on the 4X location
- */
- velocity_rx_reset(vptr);
- mac_rx_queue_run(regs);
- mac_rx_queue_wake(regs);
-
- mii_status = velocity_get_opt_media_mode(vptr);
- if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
- velocity_print_link_status(vptr);
- if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
- netif_wake_queue(vptr->dev);
- }
-
- enable_flow_control_ability(vptr);
-
- mac_clear_isr(regs);
- writel(CR0_STOP, ®s->CR0Clr);
- writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT),
- ®s->CR0Set);
-
- break;
-
- case VELOCITY_INIT_COLD:
- default:
- /*
- * Do reset
- */
- velocity_soft_reset(vptr);
- mdelay(5);
-
- mac_eeprom_reload(regs);
- for (i = 0; i < 6; i++)
- writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
-
- /*
- * clear Pre_ACPI bit.
- */
- BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA));
- mac_set_rx_thresh(regs, vptr->options.rx_thresh);
- mac_set_dma_length(regs, vptr->options.DMA_length);
-
- writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet);
- /*
- * Back off algorithm use original IEEE standard
- */
- BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB);
-
- /*
- * Init CAM filter
- */
- velocity_init_cam_filter(vptr);
-
- /*
- * Set packet filter: Receive directed and broadcast address
- */
- velocity_set_multi(vptr->dev);
-
- /*
- * Enable MII auto-polling
- */
- enable_mii_autopoll(regs);
-
- setup_adaptive_interrupts(vptr);
-
- writel(vptr->rx.pool_dma, ®s->RDBaseLo);
- writew(vptr->options.numrx - 1, ®s->RDCSize);
- mac_rx_queue_run(regs);
- mac_rx_queue_wake(regs);
-
- writew(vptr->options.numtx - 1, ®s->TDCSize);
-
- for (i = 0; i < vptr->tx.numq; i++) {
- writel(vptr->tx.pool_dma[i], ®s->TDBaseLo[i]);
- mac_tx_queue_run(regs, i);
- }
-
- init_flow_control_register(vptr);
-
- writel(CR0_STOP, ®s->CR0Clr);
- writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set);
-
- mii_status = velocity_get_opt_media_mode(vptr);
- netif_stop_queue(vptr->dev);
-
- mii_init(vptr, mii_status);
-
- if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
- velocity_print_link_status(vptr);
- if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
- netif_wake_queue(vptr->dev);
- }
-
- enable_flow_control_ability(vptr);
- mac_hw_mibs_init(regs);
- mac_write_int_mask(vptr->int_mask, regs);
- mac_clear_isr(regs);
-
- }
-}
-
-static void velocity_give_many_rx_descs(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
-
- /*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
- */
- if (vptr->rx.filled < 4)
- return;
-
- wmb();
-
- unusable = vptr->rx.filled & 0x0003;
- dirty = vptr->rx.dirty - unusable;
- for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
- vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
- }
-
- writew(vptr->rx.filled & 0xfffc, ®s->RBRDU);
- vptr->rx.filled = unusable;
-}
-
-/**
- * velocity_init_dma_rings - set up DMA rings
- * @vptr: Velocity to set up
- *
- * Allocate PCI mapped DMA rings for the receive and transmit layer
- * to use.
- */
-static int velocity_init_dma_rings(struct velocity_info *vptr)
-{
- struct velocity_opt *opt = &vptr->options;
- const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
- const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
- struct pci_dev *pdev = vptr->pdev;
- dma_addr_t pool_dma;
- void *pool;
- unsigned int i;
-
- /*
- * Allocate all RD/TD rings a single pool.
- *
- * pci_alloc_consistent() fulfills the requirement for 64 bytes
- * alignment
- */
- pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
- rx_ring_size, &pool_dma);
- if (!pool) {
- dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
- vptr->dev->name);
- return -ENOMEM;
- }
-
- vptr->rx.ring = pool;
- vptr->rx.pool_dma = pool_dma;
-
- pool += rx_ring_size;
- pool_dma += rx_ring_size;
-
- for (i = 0; i < vptr->tx.numq; i++) {
- vptr->tx.rings[i] = pool;
- vptr->tx.pool_dma[i] = pool_dma;
- pool += tx_ring_size;
- pool_dma += tx_ring_size;
- }
-
- return 0;
-}
-
-static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
-{
- vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
-}
-
-/**
- * velocity_alloc_rx_buf - allocate aligned receive buffer
- * @vptr: velocity
- * @idx: ring index
- *
- * Allocate a new full sized buffer for the reception of a frame and
- * map it into PCI space for the hardware to use. The hardware
- * requires *64* byte alignment of the buffer which makes life
- * less fun than would be ideal.
- */
-static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
-{
- struct rx_desc *rd = &(vptr->rx.ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
-
- rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
-
- /*
- * Do the gymnastics to get the buffer head for data at
- * 64byte alignment.
- */
- skb_reserve(rd_info->skb,
- 64 - ((unsigned long) rd_info->skb->data & 63));
- rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
- vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
-
- /*
- * Fill in the descriptor to match
- */
-
- *((u32 *) & (rd->rdesc0)) = 0;
- rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
- rd->pa_high = 0;
- return 0;
-}
-
-
-static int velocity_rx_refill(struct velocity_info *vptr)
-{
- int dirty = vptr->rx.dirty, done = 0;
-
- do {
- struct rx_desc *rd = vptr->rx.ring + dirty;
-
- /* Fine for an all zero Rx desc at init time as well */
- if (rd->rdesc0.len & OWNED_BY_NIC)
- break;
-
- if (!vptr->rx.info[dirty].skb) {
- if (velocity_alloc_rx_buf(vptr, dirty) < 0)
- break;
- }
- done++;
- dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
- } while (dirty != vptr->rx.curr);
-
- if (done) {
- vptr->rx.dirty = dirty;
- vptr->rx.filled += done;
- }
-
- return done;
-}
-
-/**
- * velocity_free_rd_ring - free receive ring
- * @vptr: velocity to clean up
- *
- * Free the receive buffers for each ring slot and any
- * attached socket buffers that need to go away.
- */
-static void velocity_free_rd_ring(struct velocity_info *vptr)
-{
- int i;
-
- if (vptr->rx.info == NULL)
- return;
-
- for (i = 0; i < vptr->options.numrx; i++) {
- struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
- struct rx_desc *rd = vptr->rx.ring + i;
-
- memset(rd, 0, sizeof(*rd));
-
- if (!rd_info->skb)
- continue;
- pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
- PCI_DMA_FROMDEVICE);
- rd_info->skb_dma = 0;
-
- dev_kfree_skb(rd_info->skb);
- rd_info->skb = NULL;
- }
-
- kfree(vptr->rx.info);
- vptr->rx.info = NULL;
-}
-
-/**
- * velocity_init_rd_ring - set up receive ring
- * @vptr: velocity to configure
- *
- * Allocate and set up the receive buffers for each ring slot and
- * assign them to the network adapter.
- */
-static int velocity_init_rd_ring(struct velocity_info *vptr)
-{
- int ret = -ENOMEM;
-
- vptr->rx.info = kcalloc(vptr->options.numrx,
- sizeof(struct velocity_rd_info), GFP_KERNEL);
- if (!vptr->rx.info)
- goto out;
-
- velocity_init_rx_ring_indexes(vptr);
-
- if (velocity_rx_refill(vptr) != vptr->options.numrx) {
- VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
- "%s: failed to allocate RX buffer.\n", vptr->dev->name);
- velocity_free_rd_ring(vptr);
- goto out;
- }
-
- ret = 0;
-out:
- return ret;
-}
-
-/**
- * velocity_init_td_ring - set up transmit ring
- * @vptr: velocity
- *
- * Set up the transmit ring and chain the ring pointers together.
- * Returns zero on success or a negative posix errno code for
- * failure.
- */
-static int velocity_init_td_ring(struct velocity_info *vptr)
-{
- int j;
-
- /* Init the TD ring entries */
- for (j = 0; j < vptr->tx.numq; j++) {
-
- vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
- sizeof(struct velocity_td_info),
- GFP_KERNEL);
- if (!vptr->tx.infos[j]) {
- while (--j >= 0)
- kfree(vptr->tx.infos[j]);
- return -ENOMEM;
- }
-
- vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
- }
- return 0;
-}
-
-/**
- * velocity_free_dma_rings - free PCI ring pointers
- * @vptr: Velocity to free from
- *
- * Clean up the PCI ring buffers allocated to this velocity.
- */
-static void velocity_free_dma_rings(struct velocity_info *vptr)
-{
- const int size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
-
- pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
-}
-
-static int velocity_init_rings(struct velocity_info *vptr, int mtu)
-{
- int ret;
-
- velocity_set_rxbufsize(vptr, mtu);
-
- ret = velocity_init_dma_rings(vptr);
- if (ret < 0)
- goto out;
-
- ret = velocity_init_rd_ring(vptr);
- if (ret < 0)
- goto err_free_dma_rings_0;
-
- ret = velocity_init_td_ring(vptr);
- if (ret < 0)
- goto err_free_rd_ring_1;
-out:
- return ret;
-
-err_free_rd_ring_1:
- velocity_free_rd_ring(vptr);
-err_free_dma_rings_0:
- velocity_free_dma_rings(vptr);
- goto out;
-}
-
-/**
- * velocity_free_tx_buf - free transmit buffer
- * @vptr: velocity
- * @tdinfo: buffer
- *
- * Release an transmit buffer. If the buffer was preallocated then
- * recycle it, if not then unmap the buffer.
- */
-static void velocity_free_tx_buf(struct velocity_info *vptr,
- struct velocity_td_info *tdinfo, struct tx_desc *td)
-{
- struct sk_buff *skb = tdinfo->skb;
-
- /*
- * Don't unmap the pre-allocated tx_bufs
- */
- if (tdinfo->skb_dma) {
- int i;
-
- for (i = 0; i < tdinfo->nskb_dma; i++) {
- size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN);
-
- /* For scatter-gather */
- if (skb_shinfo(skb)->nr_frags > 0)
- pktlen = max_t(size_t, pktlen,
- td->td_buf[i].size & ~TD_QUEUE);
-
- pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i],
- le16_to_cpu(pktlen), PCI_DMA_TODEVICE);
- }
- }
- dev_kfree_skb_irq(skb);
- tdinfo->skb = NULL;
-}
-
-/*
- * FIXME: could we merge this with velocity_free_tx_buf ?
- */
-static void velocity_free_td_ring_entry(struct velocity_info *vptr,
- int q, int n)
-{
- struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]);
- int i;
-
- if (td_info == NULL)
- return;
-
- if (td_info->skb) {
- for (i = 0; i < td_info->nskb_dma; i++) {
- if (td_info->skb_dma[i]) {
- pci_unmap_single(vptr->pdev, td_info->skb_dma[i],
- td_info->skb->len, PCI_DMA_TODEVICE);
- td_info->skb_dma[i] = 0;
- }
- }
- dev_kfree_skb(td_info->skb);
- td_info->skb = NULL;
- }
-}
-
-/**
- * velocity_free_td_ring - free td ring
- * @vptr: velocity
- *
- * Free up the transmit ring for this particular velocity adapter.
- * We free the ring contents but not the ring itself.
- */
-static void velocity_free_td_ring(struct velocity_info *vptr)
-{
- int i, j;
-
- for (j = 0; j < vptr->tx.numq; j++) {
- if (vptr->tx.infos[j] == NULL)
- continue;
- for (i = 0; i < vptr->options.numtx; i++)
- velocity_free_td_ring_entry(vptr, j, i);
-
- kfree(vptr->tx.infos[j]);
- vptr->tx.infos[j] = NULL;
- }
-}
-
-static void velocity_free_rings(struct velocity_info *vptr)
-{
- velocity_free_td_ring(vptr);
- velocity_free_rd_ring(vptr);
- velocity_free_dma_rings(vptr);
-}
-
-/**
- * velocity_error - handle error from controller
- * @vptr: velocity
- * @status: card status
- *
- * Process an error report from the hardware and attempt to recover
- * the card itself. At the moment we cannot recover from some
- * theoretically impossible errors but this could be fixed using
- * the pci_device_failed logic to bounce the hardware
- *
- */
-static void velocity_error(struct velocity_info *vptr, int status)
-{
-
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem *regs = vptr->mac_regs;
-
- printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0]));
- BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR);
- writew(TRDCSR_RUN, ®s->TDCSRClr);
- netif_stop_queue(vptr->dev);
-
- /* FIXME: port over the pci_device_failed code and use it
- here */
- }
-
- if (status & ISR_SRCI) {
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int linked;
-
- if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- vptr->mii_status = check_connection_type(regs);
-
- /*
- * If it is a 3119, disable frame bursting in
- * halfduplex mode and enable it in fullduplex
- * mode
- */
- if (vptr->rev_id < REV_ID_VT3216_A0) {
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
- else
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
- }
- /*
- * Only enable CD heart beat counter in 10HD mode
- */
- if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
- else
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
-
- setup_queue_timers(vptr);
- }
- /*
- * Get link status from PHYSR0
- */
- linked = readb(®s->PHYSR0) & PHYSR0_LINKGD;
-
- if (linked) {
- vptr->mii_status &= ~VELOCITY_LINK_FAIL;
- netif_carrier_on(vptr->dev);
- } else {
- vptr->mii_status |= VELOCITY_LINK_FAIL;
- netif_carrier_off(vptr->dev);
- }
-
- velocity_print_link_status(vptr);
- enable_flow_control_ability(vptr);
-
- /*
- * Re-enable auto-polling because SRCI will disable
- * auto-polling
- */
-
- enable_mii_autopoll(regs);
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL)
- netif_stop_queue(vptr->dev);
- else
- netif_wake_queue(vptr->dev);
-
- }
- if (status & ISR_MIBFI)
- velocity_update_hw_mibs(vptr);
- if (status & ISR_LSTEI)
- mac_rx_queue_wake(vptr->mac_regs);
-}
-
-/**
- * tx_srv - transmit interrupt service
- * @vptr; Velocity
- *
- * Scan the queues looking for transmitted packets that
- * we can complete and clean up. Update any statistics as
- * necessary/
- */
-static int velocity_tx_srv(struct velocity_info *vptr)
-{
- struct tx_desc *td;
- int qnum;
- int full = 0;
- int idx;
- int works = 0;
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->dev->stats;
-
- for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
- for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
-
- /*
- * Get Tx Descriptor
- */
- td = &(vptr->tx.rings[qnum][idx]);
- tdinfo = &(vptr->tx.infos[qnum][idx]);
-
- if (td->tdesc0.len & OWNED_BY_NIC)
- break;
-
- if ((works++ > 15))
- break;
-
- if (td->tdesc0.TSR & TSR0_TERR) {
- stats->tx_errors++;
- stats->tx_dropped++;
- if (td->tdesc0.TSR & TSR0_CDH)
- stats->tx_heartbeat_errors++;
- if (td->tdesc0.TSR & TSR0_CRS)
- stats->tx_carrier_errors++;
- if (td->tdesc0.TSR & TSR0_ABT)
- stats->tx_aborted_errors++;
- if (td->tdesc0.TSR & TSR0_OWC)
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
- stats->tx_bytes += tdinfo->skb->len;
- }
- velocity_free_tx_buf(vptr, tdinfo, td);
- vptr->tx.used[qnum]--;
- }
- vptr->tx.tail[qnum] = idx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- full = 1;
- }
- /*
- * Look to see if we should kick the transmit network
- * layer for more work.
- */
- if (netif_queue_stopped(vptr->dev) && (full == 0) &&
- (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
- netif_wake_queue(vptr->dev);
- }
- return works;
-}
-
-/**
- * velocity_rx_csum - checksum process
- * @rd: receive packet descriptor
- * @skb: network layer packet buffer
- *
- * Process the status bits for the received packet and determine
- * if the checksum was computed and verified by the hardware
- */
-static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- if (rd->rdesc1.CSM & CSM_IPKT) {
- if (rd->rdesc1.CSM & CSM_IPOK) {
- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
- (rd->rdesc1.CSM & CSM_UDPKT)) {
- if (!(rd->rdesc1.CSM & CSM_TUPOK))
- return;
- }
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- }
- }
-}
-
-/**
- * velocity_rx_copy - in place Rx copy for small packets
- * @rx_skb: network layer packet buffer candidate
- * @pkt_size: received data size
- * @rd: receive packet descriptor
- * @dev: network device
- *
- * Replace the current skb that is scheduled for Rx processing by a
- * shorter, immediately allocated skb, if the received packet is small
- * enough. This function returns a negative value if the received
- * packet is too big or if memory is exhausted.
- */
-static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
- struct velocity_info *vptr)
-{
- int ret = -1;
- if (pkt_size < rx_copybreak) {
- struct sk_buff *new_skb;
-
- new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size);
- if (new_skb) {
- new_skb->ip_summed = rx_skb[0]->ip_summed;
- skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
- *rx_skb = new_skb;
- ret = 0;
- }
-
- }
- return ret;
-}
-
-/**
- * velocity_iph_realign - IP header alignment
- * @vptr: velocity we are handling
- * @skb: network layer packet buffer
- * @pkt_size: received data size
- *
- * Align IP header on a 2 bytes boundary. This behavior can be
- * configured by the user.
- */
-static inline void velocity_iph_realign(struct velocity_info *vptr,
- struct sk_buff *skb, int pkt_size)
-{
- if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
- memmove(skb->data + 2, skb->data, pkt_size);
- skb_reserve(skb, 2);
- }
-}
-
-/**
- * velocity_receive_frame - received packet processor
- * @vptr: velocity we are handling
- * @idx: ring index
- *
- * A packet has arrived. We process the packet and if appropriate
- * pass the frame up the network stack
- */
-static int velocity_receive_frame(struct velocity_info *vptr, int idx)
-{
- void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
- struct net_device_stats *stats = &vptr->dev->stats;
- struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
- struct rx_desc *rd = &(vptr->rx.ring[idx]);
- int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
- struct sk_buff *skb;
-
- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
- stats->rx_length_errors++;
- return -EINVAL;
- }
-
- if (rd->rdesc0.RSR & RSR_MAR)
- stats->multicast++;
-
- skb = rd_info->skb;
-
- pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
- vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
-
- /*
- * Drop frame not meeting IEEE 802.3
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
- if (rd->rdesc0.RSR & RSR_RL) {
- stats->rx_length_errors++;
- return -EINVAL;
- }
- }
-
- pci_action = pci_dma_sync_single_for_device;
-
- velocity_rx_csum(rd, skb);
-
- if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
- velocity_iph_realign(vptr, skb, pkt_len);
- pci_action = pci_unmap_single;
- rd_info->skb = NULL;
- }
-
- pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
- PCI_DMA_FROMDEVICE);
-
- skb_put(skb, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, vptr->dev);
-
- if (rd->rdesc0.RSR & RSR_DETAG) {
- u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG));
-
- __vlan_hwaccel_put_tag(skb, vid);
- }
- netif_rx(skb);
-
- stats->rx_bytes += pkt_len;
- stats->rx_packets++;
-
- return 0;
-}
-
-/**
- * velocity_rx_srv - service RX interrupt
- * @vptr: velocity
- *
- * Walk the receive ring of the velocity adapter and remove
- * any received packets from the receive queue. Hand the ring
- * slots back to the adapter for reuse.
- */
-static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
-{
- struct net_device_stats *stats = &vptr->dev->stats;
- int rd_curr = vptr->rx.curr;
- int works = 0;
-
- while (works < budget_left) {
- struct rx_desc *rd = vptr->rx.ring + rd_curr;
-
- if (!vptr->rx.info[rd_curr].skb)
- break;
-
- if (rd->rdesc0.len & OWNED_BY_NIC)
- break;
-
- rmb();
-
- /*
- * Don't drop CE or RL error frame although RXOK is off
- */
- if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
- if (rd->rdesc0.RSR & RSR_CRC)
- stats->rx_crc_errors++;
- if (rd->rdesc0.RSR & RSR_FAE)
- stats->rx_frame_errors++;
-
- stats->rx_dropped++;
- }
-
- rd->size |= RX_INTEN;
-
- rd_curr++;
- if (rd_curr >= vptr->options.numrx)
- rd_curr = 0;
- works++;
- }
-
- vptr->rx.curr = rd_curr;
-
- if ((works > 0) && (velocity_rx_refill(vptr) > 0))
- velocity_give_many_rx_descs(vptr);
-
- VAR_USED(stats);
- return works;
-}
-
-static int velocity_poll(struct napi_struct *napi, int budget)
-{
- struct velocity_info *vptr = container_of(napi,
- struct velocity_info, napi);
- unsigned int rx_done;
- unsigned long flags;
-
- spin_lock_irqsave(&vptr->lock, flags);
- /*
- * Do rx and tx twice for performance (taken from the VIA
- * out-of-tree driver).
- */
- rx_done = velocity_rx_srv(vptr, budget / 2);
- velocity_tx_srv(vptr);
- rx_done += velocity_rx_srv(vptr, budget - rx_done);
- velocity_tx_srv(vptr);
-
- /* If budget not fully consumed, exit the polling mode */
- if (rx_done < budget) {
- napi_complete(napi);
- mac_enable_int(vptr->mac_regs);
- }
- spin_unlock_irqrestore(&vptr->lock, flags);
-
- return rx_done;
-}
-
-/**
- * velocity_intr - interrupt callback
- * @irq: interrupt number
- * @dev_instance: interrupting device
- *
- * Called whenever an interrupt is generated by the velocity
- * adapter IRQ line. We may not be the source of the interrupt
- * and need to identify initially if we are, and if not exit as
- * efficiently as possible.
- */
-static irqreturn_t velocity_intr(int irq, void *dev_instance)
-{
- struct net_device *dev = dev_instance;
- struct velocity_info *vptr = netdev_priv(dev);
- u32 isr_status;
-
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
- /* Not us ? */
- if (isr_status == 0) {
- spin_unlock(&vptr->lock);
- return IRQ_NONE;
- }
-
- /* Ack the interrupt */
- mac_write_isr(vptr->mac_regs, isr_status);
-
- if (likely(napi_schedule_prep(&vptr->napi))) {
- mac_disable_int(vptr->mac_regs);
- __napi_schedule(&vptr->napi);
- }
-
- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
- velocity_error(vptr, isr_status);
-
- spin_unlock(&vptr->lock);
-
- return IRQ_HANDLED;
-}
-
-/**
- * velocity_open - interface activation callback
- * @dev: network layer device to open
- *
- * Called when the network layer brings the interface up. Returns
- * a negative posix error code on failure, or zero on success.
- *
- * All the ring allocation and set up is done on open for this
- * adapter to minimise memory usage when inactive
- */
-static int velocity_open(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
- ret = velocity_init_rings(vptr, dev->mtu);
- if (ret < 0)
- goto out;
-
- /* Ensure chip is running */
- pci_set_power_state(vptr->pdev, PCI_D0);
-
- velocity_init_registers(vptr, VELOCITY_INIT_COLD);
-
- ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED,
- dev->name, dev);
- if (ret < 0) {
- /* Power down the chip */
- pci_set_power_state(vptr->pdev, PCI_D3hot);
- velocity_free_rings(vptr);
- goto out;
- }
-
- velocity_give_many_rx_descs(vptr);
-
- mac_enable_int(vptr->mac_regs);
- netif_start_queue(dev);
- napi_enable(&vptr->napi);
- vptr->flags |= VELOCITY_FLAGS_OPENED;
-out:
- return ret;
-}
-
-/**
- * velocity_shutdown - shut down the chip
- * @vptr: velocity to deactivate
- *
- * Shuts down the internal operations of the velocity and
- * disables interrupts, autopolling, transmit and receive
- */
-static void velocity_shutdown(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- mac_disable_int(regs);
- writel(CR0_STOP, ®s->CR0Set);
- writew(0xFFFF, ®s->TDCSRClr);
- writeb(0xFF, ®s->RDCSRClr);
- safe_disable_mii_autopoll(regs);
- mac_clear_isr(regs);
-}
-
-/**
- * velocity_change_mtu - MTU change callback
- * @dev: network device
- * @new_mtu: desired MTU
- *
- * Handle requests from the networking layer for MTU change on
- * this interface. It gets called on a change by the network layer.
- * Return zero for success or negative posix error code.
- */
-static int velocity_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret = 0;
-
- if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
- VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
- vptr->dev->name);
- ret = -EINVAL;
- goto out_0;
- }
-
- if (!netif_running(dev)) {
- dev->mtu = new_mtu;
- goto out_0;
- }
-
- if (dev->mtu != new_mtu) {
- struct velocity_info *tmp_vptr;
- unsigned long flags;
- struct rx_info rx;
- struct tx_info tx;
-
- tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
- if (!tmp_vptr) {
- ret = -ENOMEM;
- goto out_0;
- }
-
- tmp_vptr->dev = dev;
- tmp_vptr->pdev = vptr->pdev;
- tmp_vptr->options = vptr->options;
- tmp_vptr->tx.numq = vptr->tx.numq;
-
- ret = velocity_init_rings(tmp_vptr, new_mtu);
- if (ret < 0)
- goto out_free_tmp_vptr_1;
-
- spin_lock_irqsave(&vptr->lock, flags);
-
- netif_stop_queue(dev);
- velocity_shutdown(vptr);
-
- rx = vptr->rx;
- tx = vptr->tx;
-
- vptr->rx = tmp_vptr->rx;
- vptr->tx = tmp_vptr->tx;
-
- tmp_vptr->rx = rx;
- tmp_vptr->tx = tx;
-
- dev->mtu = new_mtu;
-
- velocity_init_registers(vptr, VELOCITY_INIT_COLD);
-
- velocity_give_many_rx_descs(vptr);
-
- mac_enable_int(vptr->mac_regs);
- netif_start_queue(dev);
-
- spin_unlock_irqrestore(&vptr->lock, flags);
-
- velocity_free_rings(tmp_vptr);
-
-out_free_tmp_vptr_1:
- kfree(tmp_vptr);
- }
-out_0:
- return ret;
-}
-
-/**
- * velocity_mii_ioctl - MII ioctl handler
- * @dev: network device
- * @ifr: the ifreq block for the ioctl
- * @cmd: the command
- *
- * Process MII requests made via ioctl from the network layer. These
- * are used by tools like kudzu to interrogate the link state of the
- * hardware
- */
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- unsigned long flags;
- struct mii_ioctl_data *miidata = if_mii(ifr);
- int err;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- miidata->phy_id = readb(®s->MIIADR) & 0x1f;
- break;
- case SIOCGMIIREG:
- if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
- return -ETIMEDOUT;
- break;
- case SIOCSMIIREG:
- spin_lock_irqsave(&vptr->lock, flags);
- err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
- spin_unlock_irqrestore(&vptr->lock, flags);
- check_connection_type(vptr->mac_regs);
- if (err)
- return err;
- break;
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-/**
- * velocity_ioctl - ioctl entry point
- * @dev: network device
- * @rq: interface request ioctl
- * @cmd: command code
- *
- * Called when the user issues an ioctl request to the network
- * device in question. The velocity interface supports MII.
- */
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D0);
-
- switch (cmd) {
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- case SIOCGMIIREG: /* Read MII PHY register. */
- case SIOCSMIIREG: /* Write to MII PHY register. */
- ret = velocity_mii_ioctl(dev, rq, cmd);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
-
- return ret;
-}
-
-/**
- * velocity_get_status - statistics callback
- * @dev: network device
- *
- * Callback from the network layer to allow driver statistics
- * to be resynchronized with hardware collected state. In the
- * case of the velocity we need to pull the MIB counters from
- * the hardware into the counters before letting the network
- * layer display them.
- */
-static struct net_device_stats *velocity_get_stats(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- /* If the hardware is down, don't touch MII */
- if (!netif_running(dev))
- return &dev->stats;
-
- spin_lock_irq(&vptr->lock);
- velocity_update_hw_mibs(vptr);
- spin_unlock_irq(&vptr->lock);
-
- dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
- dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
- dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
-
-// unsigned long rx_dropped; /* no space in linux buffers */
- dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
- /* detailed rx_errors: */
-// unsigned long rx_length_errors;
-// unsigned long rx_over_errors; /* receiver ring buff overflow */
- dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
-// unsigned long rx_frame_errors; /* recv'd frame alignment error */
-// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
-// unsigned long rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
-// unsigned long tx_fifo_errors;
-
- return &dev->stats;
-}
-
-/**
- * velocity_close - close adapter callback
- * @dev: network device
- *
- * Callback from the network layer when the velocity is being
- * deactivated by the network layer
- */
-static int velocity_close(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- napi_disable(&vptr->napi);
- netif_stop_queue(dev);
- velocity_shutdown(vptr);
-
- if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
- velocity_get_ip(vptr);
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
-
- /* Power down the chip */
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
- velocity_free_rings(vptr);
-
- vptr->flags &= (~VELOCITY_FLAGS_OPENED);
- return 0;
-}
-
-/**
- * velocity_xmit - transmit packet callback
- * @skb: buffer to transmit
- * @dev: network device
- *
- * Called by the networ layer to request a packet is queued to
- * the velocity. Returns zero on success.
- */
-static netdev_tx_t velocity_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int qnum = 0;
- struct tx_desc *td_ptr;
- struct velocity_td_info *tdinfo;
- unsigned long flags;
- int pktlen;
- int index, prev;
- int i = 0;
-
- if (skb_padto(skb, ETH_ZLEN))
- goto out;
-
- /* The hardware can handle at most 7 memory segments, so merge
- * the skb if there are more */
- if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
- kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- pktlen = skb_shinfo(skb)->nr_frags == 0 ?
- max_t(unsigned int, skb->len, ETH_ZLEN) :
- skb_headlen(skb);
-
- spin_lock_irqsave(&vptr->lock, flags);
-
- index = vptr->tx.curr[qnum];
- td_ptr = &(vptr->tx.rings[qnum][index]);
- tdinfo = &(vptr->tx.infos[qnum][index]);
-
- td_ptr->tdesc1.TCR = TCR0_TIC;
- td_ptr->td_buf[0].size &= ~TD_QUEUE;
-
- /*
- * Map the linear network buffer into PCI space and
- * add it to the transmit ring.
- */
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
- td_ptr->tdesc0.len = cpu_to_le16(pktlen);
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->td_buf[0].pa_high = 0;
- td_ptr->td_buf[0].size = cpu_to_le16(pktlen);
-
- /* Handle fragments */
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
- tdinfo->skb_dma[i + 1] = pci_map_page(vptr->pdev, frag->page,
- frag->page_offset, frag->size,
- PCI_DMA_TODEVICE);
-
- td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
- td_ptr->td_buf[i + 1].pa_high = 0;
- td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
- }
- tdinfo->nskb_dma = i + 1;
-
- td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
-
- if (vlan_tx_tag_present(skb)) {
- td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb));
- td_ptr->tdesc1.TCR |= TCR0_VETAG;
- }
-
- /*
- * Handle hardware checksum
- */
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const struct iphdr *ip = ip_hdr(skb);
- if (ip->protocol == IPPROTO_TCP)
- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
- else if (ip->protocol == IPPROTO_UDP)
- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
- td_ptr->tdesc1.TCR |= TCR0_IPCK;
- }
-
- prev = index - 1;
- if (prev < 0)
- prev = vptr->options.numtx - 1;
- td_ptr->tdesc0.len |= OWNED_BY_NIC;
- vptr->tx.used[qnum]++;
- vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- netif_stop_queue(dev);
-
- td_ptr = &(vptr->tx.rings[qnum][prev]);
- td_ptr->td_buf[0].size |= TD_QUEUE;
- mac_tx_queue_wake(vptr->mac_regs, qnum);
-
- spin_unlock_irqrestore(&vptr->lock, flags);
-out:
- return NETDEV_TX_OK;
-}
-
-static const struct net_device_ops velocity_netdev_ops = {
- .ndo_open = velocity_open,
- .ndo_stop = velocity_close,
- .ndo_start_xmit = velocity_xmit,
- .ndo_get_stats = velocity_get_stats,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_set_multicast_list = velocity_set_multi,
- .ndo_change_mtu = velocity_change_mtu,
- .ndo_do_ioctl = velocity_ioctl,
- .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
-};
-
-/**
- * velocity_init_info - init private data
- * @pdev: PCI device
- * @vptr: Velocity info
- * @info: Board type
- *
- * Set up the initial velocity_info struct for the device that has been
- * discovered.
- */
-static void __devinit velocity_init_info(struct pci_dev *pdev,
- struct velocity_info *vptr,
- const struct velocity_info_tbl *info)
-{
- memset(vptr, 0, sizeof(struct velocity_info));
-
- vptr->pdev = pdev;
- vptr->chip_id = info->chip_id;
- vptr->tx.numq = info->txqueue;
- vptr->multicast_limit = MCAM_SIZE;
- spin_lock_init(&vptr->lock);
-}
-
-/**
- * velocity_get_pci_info - retrieve PCI info for device
- * @vptr: velocity device
- * @pdev: PCI device it matches
- *
- * Retrieve the PCI configuration space data that interests us from
- * the kernel PCI layer
- */
-static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
-{
- vptr->rev_id = pdev->revision;
-
- pci_set_master(pdev);
-
- vptr->ioaddr = pci_resource_start(pdev, 0);
- vptr->memaddr = pci_resource_start(pdev, 1);
-
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #0 is not an I/O resource, aborting.\n");
- return -EINVAL;
- }
-
- if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #1 is an I/O resource, aborting.\n");
- return -EINVAL;
- }
-
- if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
- dev_err(&pdev->dev, "region #1 is too small.\n");
- return -EINVAL;
- }
- vptr->pdev = pdev;
-
- return 0;
-}
-
-/**
- * velocity_print_info - per driver data
- * @vptr: velocity
- *
- * Print per driver data as the kernel driver finds Velocity
- * hardware
- */
-static void __devinit velocity_print_info(struct velocity_info *vptr)
-{
- struct net_device *dev = vptr->dev;
-
- printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
- printk(KERN_INFO "%s: Ethernet Address: %pM\n",
- dev->name, dev->dev_addr);
-}
-
-static u32 velocity_get_link(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0;
-}
-
-/**
- * velocity_found1 - set up discovered velocity card
- * @pdev: PCI device
- * @ent: PCI device table entry that matched
- *
- * Configure a discovered adapter from scratch. Return a negative
- * errno error code on failure paths.
- */
-static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- static int first = 1;
- struct net_device *dev;
- int i;
- const char *drv_string;
- const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
- struct velocity_info *vptr;
- struct mac_regs __iomem *regs;
- int ret = -ENOMEM;
-
- /* FIXME: this driver, like almost all other ethernet drivers,
- * can support more than MAX_UNITS.
- */
- if (velocity_nics >= MAX_UNITS) {
- dev_notice(&pdev->dev, "already found %d NICs.\n",
- velocity_nics);
- return -ENODEV;
- }
-
- dev = alloc_etherdev(sizeof(struct velocity_info));
- if (!dev) {
- dev_err(&pdev->dev, "allocate net device failed.\n");
- goto out;
- }
-
- /* Chain it all together */
-
- SET_NETDEV_DEV(dev, &pdev->dev);
- vptr = netdev_priv(dev);
-
-
- if (first) {
- printk(KERN_INFO "%s Ver. %s\n",
- VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
- printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
- printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
- first = 0;
- }
-
- velocity_init_info(pdev, vptr, info);
-
- vptr->dev = dev;
-
- ret = pci_enable_device(pdev);
- if (ret < 0)
- goto err_free_dev;
-
- dev->irq = pdev->irq;
-
- ret = velocity_get_pci_info(vptr, pdev);
- if (ret < 0) {
- /* error message already printed */
- goto err_disable;
- }
-
- ret = pci_request_regions(pdev, VELOCITY_NAME);
- if (ret < 0) {
- dev_err(&pdev->dev, "No PCI resources.\n");
- goto err_disable;
- }
-
- regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
- if (regs == NULL) {
- ret = -EIO;
- goto err_release_res;
- }
-
- vptr->mac_regs = regs;
-
- mac_wol_reset(regs);
-
- dev->base_addr = vptr->ioaddr;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = readb(®s->PAR[i]);
-
-
- drv_string = dev_driver_string(&pdev->dev);
-
- velocity_get_options(&vptr->options, velocity_nics, drv_string);
-
- /*
- * Mask out the options cannot be set to the chip
- */
-
- vptr->options.flags &= info->flags;
-
- /*
- * Enable the chip specified capbilities
- */
-
- vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
-
- vptr->wol_opts = vptr->options.wol_opts;
- vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
-
- vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
-
- dev->irq = pdev->irq;
- dev->netdev_ops = &velocity_netdev_ops;
- dev->ethtool_ops = &velocity_ethtool_ops;
- netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
-
- dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX;
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
- NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
-
- ret = register_netdev(dev);
- if (ret < 0)
- goto err_iounmap;
-
- if (!velocity_get_link(dev)) {
- netif_carrier_off(dev);
- vptr->mii_status |= VELOCITY_LINK_FAIL;
- }
-
- velocity_print_info(vptr);
- pci_set_drvdata(pdev, dev);
-
- /* and leave the chip powered down */
-
- pci_set_power_state(pdev, PCI_D3hot);
- velocity_nics++;
-out:
- return ret;
-
-err_iounmap:
- iounmap(regs);
-err_release_res:
- pci_release_regions(pdev);
-err_disable:
- pci_disable_device(pdev);
-err_free_dev:
- free_netdev(dev);
- goto out;
-}
-
-#ifdef CONFIG_PM
-/**
- * wol_calc_crc - WOL CRC
- * @pattern: data pattern
- * @mask_pattern: mask
- *
- * Compute the wake on lan crc hashes for the packet header
- * we are interested in.
- */
-static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
-{
- u16 crc = 0xFFFF;
- u8 mask;
- int i, j;
-
- for (i = 0; i < size; i++) {
- mask = mask_pattern[i];
-
- /* Skip this loop if the mask equals to zero */
- if (mask == 0x00)
- continue;
-
- for (j = 0; j < 8; j++) {
- if ((mask & 0x01) == 0) {
- mask >>= 1;
- continue;
- }
- mask >>= 1;
- crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
- }
- }
- /* Finally, invert the result once to get the correct data */
- crc = ~crc;
- return bitrev32(crc) >> 16;
-}
-
-/**
- * velocity_set_wol - set up for wake on lan
- * @vptr: velocity to set WOL status on
- *
- * Set a card up for wake on lan either by unicast or by
- * ARP packet.
- *
- * FIXME: check static buffer is safe here
- */
-static int velocity_set_wol(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- enum speed_opt spd_dpx = vptr->options.spd_dpx;
- static u8 buf[256];
- int i;
-
- static u32 mask_pattern[2][4] = {
- {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
- {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
- };
-
- writew(0xFFFF, ®s->WOLCRClr);
- writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet);
- writew(WOLCR_MAGIC_EN, ®s->WOLCRSet);
-
- /*
- if (vptr->wol_opts & VELOCITY_WOL_PHY)
- writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet);
- */
-
- if (vptr->wol_opts & VELOCITY_WOL_UCAST)
- writew(WOLCR_UNICAST_EN, ®s->WOLCRSet);
-
- if (vptr->wol_opts & VELOCITY_WOL_ARP) {
- struct arp_packet *arp = (struct arp_packet *) buf;
- u16 crc;
- memset(buf, 0, sizeof(struct arp_packet) + 7);
-
- for (i = 0; i < 4; i++)
- writel(mask_pattern[0][i], ®s->ByteMask[0][i]);
-
- arp->type = htons(ETH_P_ARP);
- arp->ar_op = htons(1);
-
- memcpy(arp->ar_tip, vptr->ip_addr, 4);
-
- crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
- (u8 *) & mask_pattern[0][0]);
-
- writew(crc, ®s->PatternCRC[0]);
- writew(WOLCR_ARP_EN, ®s->WOLCRSet);
- }
-
- BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet);
- BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet);
-
- writew(0x0FFF, ®s->WOLSRClr);
-
- if (spd_dpx == SPD_DPX_1000_FULL)
- goto mac_done;
-
- if (spd_dpx != SPD_DPX_AUTO)
- goto advertise_done;
-
- if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
-
- MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
- }
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
-
-advertise_done:
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
-
- {
- u8 GCR;
- GCR = readb(®s->CHIPGCR);
- GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
- writeb(GCR, ®s->CHIPGCR);
- }
-
-mac_done:
- BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR);
- /* Turn on SWPTAG just before entering power mode */
- BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW);
- /* Go to bed ..... */
- BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
-
- return 0;
-}
-
-/**
- * velocity_save_context - save registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Retrieve the current configuration from the velocity hardware
- * and stash it in the context structure, for use by the context
- * restore functions. This allows us to save things we need across
- * power down states
- */
-static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u16 i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
-}
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
-
- if (!netif_running(vptr->dev))
- return 0;
-
- netif_device_detach(vptr->dev);
-
- spin_lock_irqsave(&vptr->lock, flags);
- pci_save_state(pdev);
-
- if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
- velocity_get_ip(vptr);
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- velocity_set_wol(vptr);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_set_power_state(pdev, PCI_D3hot);
- } else {
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- }
-
- spin_unlock_irqrestore(&vptr->lock, flags);
- return 0;
-}
-
-/**
- * velocity_restore_context - restore registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Reload the register configuration from the velocity context
- * created by velocity_save_context.
- */
-static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
-
- /* Just skip cr0 */
- for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
- /* Clear */
- writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
- /* Set */
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
- }
-
- for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
-
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
-
- for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
-}
-
-static int velocity_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
- int i;
-
- if (!netif_running(vptr->dev))
- return 0;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, 0, 0);
- pci_restore_state(pdev);
-
- mac_wol_reset(vptr->mac_regs);
-
- spin_lock_irqsave(&vptr->lock, flags);
- velocity_restore_context(vptr, &vptr->context);
- velocity_init_registers(vptr, VELOCITY_INIT_WOL);
- mac_disable_int(vptr->mac_regs);
-
- velocity_tx_srv(vptr);
-
- for (i = 0; i < vptr->tx.numq; i++) {
- if (vptr->tx.used[i])
- mac_tx_queue_wake(vptr->mac_regs, i);
- }
-
- mac_enable_int(vptr->mac_regs);
- spin_unlock_irqrestore(&vptr->lock, flags);
- netif_device_attach(vptr->dev);
-
- return 0;
-}
-#endif
-
-/*
- * Definition for our device driver. The PCI layer interface
- * uses this to handle all our card discover and plugging
- */
-static struct pci_driver velocity_driver = {
- .name = VELOCITY_NAME,
- .id_table = velocity_id_table,
- .probe = velocity_found1,
- .remove = __devexit_p(velocity_remove1),
-#ifdef CONFIG_PM
- .suspend = velocity_suspend,
- .resume = velocity_resume,
-#endif
-};
-
-
-/**
- * velocity_ethtool_up - pre hook for ethtool
- * @dev: network device
- *
- * Called before an ethtool operation. We need to make sure the
- * chip is out of D3 state before we poke at it.
- */
-static int velocity_ethtool_up(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D0);
- return 0;
-}
-
-/**
- * velocity_ethtool_down - post hook for ethtool
- * @dev: network device
- *
- * Called after an ethtool operation. Restore the chip back to D3
- * state if it isn't running.
- */
-static void velocity_ethtool_down(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-}
-
-static int velocity_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem *regs = vptr->mac_regs;
- u32 status;
- status = check_connection_type(vptr->mac_regs);
-
- cmd->supported = SUPPORTED_TP |
- SUPPORTED_Autoneg |
- SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full;
-
- cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
- if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- cmd->advertising |=
- ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full;
- } else {
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_1000_FULL:
- cmd->advertising |= ADVERTISED_1000baseT_Full;
- break;
- case SPD_DPX_100_HALF:
- cmd->advertising |= ADVERTISED_100baseT_Half;
- break;
- case SPD_DPX_100_FULL:
- cmd->advertising |= ADVERTISED_100baseT_Full;
- break;
- case SPD_DPX_10_HALF:
- cmd->advertising |= ADVERTISED_10baseT_Half;
- break;
- case SPD_DPX_10_FULL:
- cmd->advertising |= ADVERTISED_10baseT_Full;
- break;
- default:
- break;
- }
- }
-
- if (status & VELOCITY_SPEED_1000)
- ethtool_cmd_speed_set(cmd, SPEED_1000);
- else if (status & VELOCITY_SPEED_100)
- ethtool_cmd_speed_set(cmd, SPEED_100);
- else
- ethtool_cmd_speed_set(cmd, SPEED_10);
-
- cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
- cmd->port = PORT_TP;
- cmd->transceiver = XCVR_INTERNAL;
- cmd->phy_address = readb(®s->MIIADR) & 0x1F;
-
- if (status & VELOCITY_DUPLEX_FULL)
- cmd->duplex = DUPLEX_FULL;
- else
- cmd->duplex = DUPLEX_HALF;
-
- return 0;
-}
-
-static int velocity_set_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(cmd);
- u32 curr_status;
- u32 new_status = 0;
- int ret = 0;
-
- curr_status = check_connection_type(vptr->mac_regs);
- curr_status &= (~VELOCITY_LINK_FAIL);
-
- new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
- new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
- new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
- new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
- new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
-
- if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
- (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) {
- ret = -EINVAL;
- } else {
- enum speed_opt spd_dpx;
-
- if (new_status & VELOCITY_AUTONEG_ENABLE)
- spd_dpx = SPD_DPX_AUTO;
- else if ((new_status & VELOCITY_SPEED_1000) &&
- (new_status & VELOCITY_DUPLEX_FULL)) {
- spd_dpx = SPD_DPX_1000_FULL;
- } else if (new_status & VELOCITY_SPEED_100)
- spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
- SPD_DPX_100_FULL : SPD_DPX_100_HALF;
- else if (new_status & VELOCITY_SPEED_10)
- spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
- SPD_DPX_10_FULL : SPD_DPX_10_HALF;
- else
- return -EOPNOTSUPP;
-
- vptr->options.spd_dpx = spd_dpx;
-
- velocity_set_media_mode(vptr, new_status);
- }
-
- return ret;
-}
-
-static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- strcpy(info->driver, VELOCITY_NAME);
- strcpy(info->version, VELOCITY_VERSION);
- strcpy(info->bus_info, pci_name(vptr->pdev));
-}
-
-static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
- wol->wolopts |= WAKE_MAGIC;
- /*
- if (vptr->wol_opts & VELOCITY_WOL_PHY)
- wol.wolopts|=WAKE_PHY;
- */
- if (vptr->wol_opts & VELOCITY_WOL_UCAST)
- wol->wolopts |= WAKE_UCAST;
- if (vptr->wol_opts & VELOCITY_WOL_ARP)
- wol->wolopts |= WAKE_ARP;
- memcpy(&wol->sopass, vptr->wol_passwd, 6);
-}
-
-static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
- return -EFAULT;
- vptr->wol_opts = VELOCITY_WOL_MAGIC;
-
- /*
- if (wol.wolopts & WAKE_PHY) {
- vptr->wol_opts|=VELOCITY_WOL_PHY;
- vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED;
- }
- */
-
- if (wol->wolopts & WAKE_MAGIC) {
- vptr->wol_opts |= VELOCITY_WOL_MAGIC;
- vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
- }
- if (wol->wolopts & WAKE_UCAST) {
- vptr->wol_opts |= VELOCITY_WOL_UCAST;
- vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
- }
- if (wol->wolopts & WAKE_ARP) {
- vptr->wol_opts |= VELOCITY_WOL_ARP;
- vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
- }
- memcpy(vptr->wol_passwd, wol->sopass, 6);
- return 0;
-}
-
-static u32 velocity_get_msglevel(struct net_device *dev)
-{
- return msglevel;
-}
-
-static void velocity_set_msglevel(struct net_device *dev, u32 value)
-{
- msglevel = value;
-}
-
-static int get_pending_timer_val(int val)
-{
- int mult_bits = val >> 6;
- int mult = 1;
-
- switch (mult_bits)
- {
- case 1:
- mult = 4; break;
- case 2:
- mult = 16; break;
- case 3:
- mult = 64; break;
- case 0:
- default:
- break;
- }
-
- return (val & 0x3f) * mult;
-}
-
-static void set_pending_timer_val(int *val, u32 us)
-{
- u8 mult = 0;
- u8 shift = 0;
-
- if (us >= 0x3f) {
- mult = 1; /* mult with 4 */
- shift = 2;
- }
- if (us >= 0x3f * 4) {
- mult = 2; /* mult with 16 */
- shift = 4;
- }
- if (us >= 0x3f * 16) {
- mult = 3; /* mult with 64 */
- shift = 6;
- }
-
- *val = (mult << 6) | ((us >> shift) & 0x3f);
-}
-
-
-static int velocity_get_coalesce(struct net_device *dev,
- struct ethtool_coalesce *ecmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup;
- ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup;
-
- ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer);
- ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer);
-
- return 0;
-}
-
-static int velocity_set_coalesce(struct net_device *dev,
- struct ethtool_coalesce *ecmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int max_us = 0x3f * 64;
- unsigned long flags;
-
- /* 6 bits of */
- if (ecmd->tx_coalesce_usecs > max_us)
- return -EINVAL;
- if (ecmd->rx_coalesce_usecs > max_us)
- return -EINVAL;
-
- if (ecmd->tx_max_coalesced_frames > 0xff)
- return -EINVAL;
- if (ecmd->rx_max_coalesced_frames > 0xff)
- return -EINVAL;
-
- vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames;
- vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames;
-
- set_pending_timer_val(&vptr->options.rxqueue_timer,
- ecmd->rx_coalesce_usecs);
- set_pending_timer_val(&vptr->options.txqueue_timer,
- ecmd->tx_coalesce_usecs);
-
- /* Setup the interrupt suppression and queue timers */
- spin_lock_irqsave(&vptr->lock, flags);
- mac_disable_int(vptr->mac_regs);
- setup_adaptive_interrupts(vptr);
- setup_queue_timers(vptr);
-
- mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
- mac_clear_isr(vptr->mac_regs);
- mac_enable_int(vptr->mac_regs);
- spin_unlock_irqrestore(&vptr->lock, flags);
-
- return 0;
-}
-
-static const char velocity_gstrings[][ETH_GSTRING_LEN] = {
- "rx_all",
- "rx_ok",
- "tx_ok",
- "rx_error",
- "rx_runt_ok",
- "rx_runt_err",
- "rx_64",
- "tx_64",
- "rx_65_to_127",
- "tx_65_to_127",
- "rx_128_to_255",
- "tx_128_to_255",
- "rx_256_to_511",
- "tx_256_to_511",
- "rx_512_to_1023",
- "tx_512_to_1023",
- "rx_1024_to_1518",
- "tx_1024_to_1518",
- "tx_ether_collisions",
- "rx_crc_errors",
- "rx_jumbo",
- "tx_jumbo",
- "rx_mac_control_frames",
- "tx_mac_control_frames",
- "rx_frame_alignement_errors",
- "rx_long_ok",
- "rx_long_err",
- "tx_sqe_errors",
- "rx_no_buf",
- "rx_symbol_errors",
- "in_range_length_errors",
- "late_collisions"
-};
-
-static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data)
-{
- switch (sset) {
- case ETH_SS_STATS:
- memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings));
- break;
- }
-}
-
-static int velocity_get_sset_count(struct net_device *dev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return ARRAY_SIZE(velocity_gstrings);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void velocity_get_ethtool_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data)
-{
- if (netif_running(dev)) {
- struct velocity_info *vptr = netdev_priv(dev);
- u32 *p = vptr->mib_counter;
- int i;
-
- spin_lock_irq(&vptr->lock);
- velocity_update_hw_mibs(vptr);
- spin_unlock_irq(&vptr->lock);
-
- for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++)
- *data++ = *p++;
- }
-}
-
-static const struct ethtool_ops velocity_ethtool_ops = {
- .get_settings = velocity_get_settings,
- .set_settings = velocity_set_settings,
- .get_drvinfo = velocity_get_drvinfo,
- .get_wol = velocity_ethtool_get_wol,
- .set_wol = velocity_ethtool_set_wol,
- .get_msglevel = velocity_get_msglevel,
- .set_msglevel = velocity_set_msglevel,
- .get_link = velocity_get_link,
- .get_strings = velocity_get_strings,
- .get_sset_count = velocity_get_sset_count,
- .get_ethtool_stats = velocity_get_ethtool_stats,
- .get_coalesce = velocity_get_coalesce,
- .set_coalesce = velocity_set_coalesce,
- .begin = velocity_ethtool_up,
- .complete = velocity_ethtool_down
-};
-
-#if defined(CONFIG_PM) && defined(CONFIG_INET)
-static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
-{
- struct in_ifaddr *ifa = ptr;
- struct net_device *dev = ifa->ifa_dev->dev;
-
- if (dev_net(dev) == &init_net &&
- dev->netdev_ops == &velocity_netdev_ops)
- velocity_get_ip(netdev_priv(dev));
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block velocity_inetaddr_notifier = {
- .notifier_call = velocity_netdev_event,
-};
-
-static void velocity_register_notifier(void)
-{
- register_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-static void velocity_unregister_notifier(void)
-{
- unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-#else
-
-#define velocity_register_notifier() do {} while (0)
-#define velocity_unregister_notifier() do {} while (0)
-
-#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
-
-/**
- * velocity_init_module - load time function
- *
- * Called when the velocity module is loaded. The PCI driver
- * is registered with the PCI layer, and in turn will call
- * the probe functions for each velocity adapter installed
- * in the system.
- */
-static int __init velocity_init_module(void)
-{
- int ret;
-
- velocity_register_notifier();
- ret = pci_register_driver(&velocity_driver);
- if (ret < 0)
- velocity_unregister_notifier();
- return ret;
-}
-
-/**
- * velocity_cleanup - module unload
- *
- * When the velocity hardware is unloaded this function is called.
- * It will clean up the notifiers and the unregister the PCI
- * driver interface for this hardware. This in turn cleans up
- * all discovered interfaces before returning from the function
- */
-static void __exit velocity_cleanup_module(void)
-{
- velocity_unregister_notifier();
- pci_unregister_driver(&velocity_driver);
-}
-
-module_init(velocity_init_module);
-module_exit(velocity_cleanup_module);
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
deleted file mode 100644
index 4cb9f13485e9..000000000000
--- a/drivers/net/via-velocity.h
+++ /dev/null
@@ -1,1579 +0,0 @@
-/*
- * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
- * All rights reserved.
- *
- * This software may be redistributed and/or modified under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * File: via-velocity.h
- *
- * Purpose: Header file to define driver's private structures.
- *
- * Author: Chuang Liang-Shing, AJ Jiang
- *
- * Date: Jan 24, 2003
- */
-
-
-#ifndef VELOCITY_H
-#define VELOCITY_H
-
-#define VELOCITY_TX_CSUM_SUPPORT
-
-#define VELOCITY_NAME "via-velocity"
-#define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"
-#define VELOCITY_VERSION "1.15"
-
-#define VELOCITY_IO_SIZE 256
-#define VELOCITY_NAPI_WEIGHT 64
-
-#define PKT_BUF_SZ 1540
-
-#define MAX_UNITS 8
-#define OPTION_DEFAULT { [0 ... MAX_UNITS-1] = -1}
-
-#define REV_ID_VT6110 (0)
-
-#define BYTE_REG_BITS_ON(x,p) do { writeb(readb((p))|(x),(p));} while (0)
-#define WORD_REG_BITS_ON(x,p) do { writew(readw((p))|(x),(p));} while (0)
-#define DWORD_REG_BITS_ON(x,p) do { writel(readl((p))|(x),(p));} while (0)
-
-#define BYTE_REG_BITS_IS_ON(x,p) (readb((p)) & (x))
-#define WORD_REG_BITS_IS_ON(x,p) (readw((p)) & (x))
-#define DWORD_REG_BITS_IS_ON(x,p) (readl((p)) & (x))
-
-#define BYTE_REG_BITS_OFF(x,p) do { writeb(readb((p)) & (~(x)),(p));} while (0)
-#define WORD_REG_BITS_OFF(x,p) do { writew(readw((p)) & (~(x)),(p));} while (0)
-#define DWORD_REG_BITS_OFF(x,p) do { writel(readl((p)) & (~(x)),(p));} while (0)
-
-#define BYTE_REG_BITS_SET(x,m,p) do { writeb( (readb((p)) & (~(m))) |(x),(p));} while (0)
-#define WORD_REG_BITS_SET(x,m,p) do { writew( (readw((p)) & (~(m))) |(x),(p));} while (0)
-#define DWORD_REG_BITS_SET(x,m,p) do { writel( (readl((p)) & (~(m)))|(x),(p));} while (0)
-
-#define VAR_USED(p) do {(p)=(p);} while (0)
-
-/*
- * Purpose: Structures for MAX RX/TX descriptors.
- */
-
-
-#define B_OWNED_BY_CHIP 1
-#define B_OWNED_BY_HOST 0
-
-/*
- * Bits in the RSR0 register
- */
-
-#define RSR_DETAG cpu_to_le16(0x0080)
-#define RSR_SNTAG cpu_to_le16(0x0040)
-#define RSR_RXER cpu_to_le16(0x0020)
-#define RSR_RL cpu_to_le16(0x0010)
-#define RSR_CE cpu_to_le16(0x0008)
-#define RSR_FAE cpu_to_le16(0x0004)
-#define RSR_CRC cpu_to_le16(0x0002)
-#define RSR_VIDM cpu_to_le16(0x0001)
-
-/*
- * Bits in the RSR1 register
- */
-
-#define RSR_RXOK cpu_to_le16(0x8000) // rx OK
-#define RSR_PFT cpu_to_le16(0x4000) // Perfect filtering address match
-#define RSR_MAR cpu_to_le16(0x2000) // MAC accept multicast address packet
-#define RSR_BAR cpu_to_le16(0x1000) // MAC accept broadcast address packet
-#define RSR_PHY cpu_to_le16(0x0800) // MAC accept physical address packet
-#define RSR_VTAG cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator
-#define RSR_STP cpu_to_le16(0x0200) // start of packet
-#define RSR_EDP cpu_to_le16(0x0100) // end of packet
-
-/*
- * Bits in the CSM register
- */
-
-#define CSM_IPOK 0x40 //IP Checksum validation ok
-#define CSM_TUPOK 0x20 //TCP/UDP Checksum validation ok
-#define CSM_FRAG 0x10 //Fragment IP datagram
-#define CSM_IPKT 0x04 //Received an IP packet
-#define CSM_TCPKT 0x02 //Received a TCP packet
-#define CSM_UDPKT 0x01 //Received a UDP packet
-
-/*
- * Bits in the TSR0 register
- */
-
-#define TSR0_ABT cpu_to_le16(0x0080) // Tx abort because of excessive collision
-#define TSR0_OWT cpu_to_le16(0x0040) // Jumbo frame Tx abort
-#define TSR0_OWC cpu_to_le16(0x0020) // Out of window collision
-#define TSR0_COLS cpu_to_le16(0x0010) // experience collision in this transmit event
-#define TSR0_NCR3 cpu_to_le16(0x0008) // collision retry counter[3]
-#define TSR0_NCR2 cpu_to_le16(0x0004) // collision retry counter[2]
-#define TSR0_NCR1 cpu_to_le16(0x0002) // collision retry counter[1]
-#define TSR0_NCR0 cpu_to_le16(0x0001) // collision retry counter[0]
-#define TSR0_TERR cpu_to_le16(0x8000) //
-#define TSR0_FDX cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode
-#define TSR0_GMII cpu_to_le16(0x2000) // current transaction is serviced by GMII mode
-#define TSR0_LNKFL cpu_to_le16(0x1000) // packet serviced during link down
-#define TSR0_SHDN cpu_to_le16(0x0400) // shutdown case
-#define TSR0_CRS cpu_to_le16(0x0200) // carrier sense lost
-#define TSR0_CDH cpu_to_le16(0x0100) // AQE test fail (CD heartbeat)
-
-//
-// Bits in the TCR0 register
-//
-#define TCR0_TIC 0x80 // assert interrupt immediately while descriptor has been send complete
-#define TCR0_PIC 0x40 // priority interrupt request, INA# is issued over adaptive interrupt scheme
-#define TCR0_VETAG 0x20 // enable VLAN tag
-#define TCR0_IPCK 0x10 // request IP checksum calculation.
-#define TCR0_UDPCK 0x08 // request UDP checksum calculation.
-#define TCR0_TCPCK 0x04 // request TCP checksum calculation.
-#define TCR0_JMBO 0x02 // indicate a jumbo packet in GMAC side
-#define TCR0_CRC 0x01 // disable CRC generation
-
-#define TCPLS_NORMAL 3
-#define TCPLS_START 2
-#define TCPLS_END 1
-#define TCPLS_MED 0
-
-
-// max transmit or receive buffer size
-#define CB_RX_BUF_SIZE 2048UL // max buffer size
- // NOTE: must be multiple of 4
-
-#define CB_MAX_RD_NUM 512 // MAX # of RD
-#define CB_MAX_TD_NUM 256 // MAX # of TD
-
-#define CB_INIT_RD_NUM_3119 128 // init # of RD, for setup VT3119
-#define CB_INIT_TD_NUM_3119 64 // init # of TD, for setup VT3119
-
-#define CB_INIT_RD_NUM 128 // init # of RD, for setup default
-#define CB_INIT_TD_NUM 64 // init # of TD, for setup default
-
-// for 3119
-#define CB_TD_RING_NUM 4 // # of TD rings.
-#define CB_MAX_SEG_PER_PKT 7 // max data seg per packet (Tx)
-
-
-/*
- * If collisions excess 15 times , tx will abort, and
- * if tx fifo underflow, tx will fail
- * we should try to resend it
- */
-
-#define CB_MAX_TX_ABORT_RETRY 3
-
-/*
- * Receive descriptor
- */
-
-struct rdesc0 {
- __le16 RSR; /* Receive status */
- __le16 len; /* bits 0--13; bit 15 - owner */
-};
-
-struct rdesc1 {
- __le16 PQTAG;
- u8 CSM;
- u8 IPKT;
-};
-
-enum {
- RX_INTEN = cpu_to_le16(0x8000)
-};
-
-struct rx_desc {
- struct rdesc0 rdesc0;
- struct rdesc1 rdesc1;
- __le32 pa_low; /* Low 32 bit PCI address */
- __le16 pa_high; /* Next 16 bit PCI address (48 total) */
- __le16 size; /* bits 0--14 - frame size, bit 15 - enable int. */
-} __packed;
-
-/*
- * Transmit descriptor
- */
-
-struct tdesc0 {
- __le16 TSR; /* Transmit status register */
- __le16 len; /* bits 0--13 - size of frame, bit 15 - owner */
-};
-
-struct tdesc1 {
- __le16 vlan;
- u8 TCR;
- u8 cmd; /* bits 0--1 - TCPLS, bits 4--7 - CMDZ */
-} __packed;
-
-enum {
- TD_QUEUE = cpu_to_le16(0x8000)
-};
-
-struct td_buf {
- __le32 pa_low;
- __le16 pa_high;
- __le16 size; /* bits 0--13 - size, bit 15 - queue */
-} __packed;
-
-struct tx_desc {
- struct tdesc0 tdesc0;
- struct tdesc1 tdesc1;
- struct td_buf td_buf[7];
-};
-
-struct velocity_rd_info {
- struct sk_buff *skb;
- dma_addr_t skb_dma;
-};
-
-/*
- * Used to track transmit side buffers.
- */
-
-struct velocity_td_info {
- struct sk_buff *skb;
- int nskb_dma;
- dma_addr_t skb_dma[7];
-};
-
-enum velocity_owner {
- OWNED_BY_HOST = 0,
- OWNED_BY_NIC = cpu_to_le16(0x8000)
-};
-
-
-/*
- * MAC registers and macros.
- */
-
-
-#define MCAM_SIZE 64
-#define VCAM_SIZE 64
-#define TX_QUEUE_NO 4
-
-#define MAX_HW_MIB_COUNTER 32
-#define VELOCITY_MIN_MTU (64)
-#define VELOCITY_MAX_MTU (9000)
-
-/*
- * Registers in the MAC
- */
-
-#define MAC_REG_PAR 0x00 // physical address
-#define MAC_REG_RCR 0x06
-#define MAC_REG_TCR 0x07
-#define MAC_REG_CR0_SET 0x08
-#define MAC_REG_CR1_SET 0x09
-#define MAC_REG_CR2_SET 0x0A
-#define MAC_REG_CR3_SET 0x0B
-#define MAC_REG_CR0_CLR 0x0C
-#define MAC_REG_CR1_CLR 0x0D
-#define MAC_REG_CR2_CLR 0x0E
-#define MAC_REG_CR3_CLR 0x0F
-#define MAC_REG_MAR 0x10
-#define MAC_REG_CAM 0x10
-#define MAC_REG_DEC_BASE_HI 0x18
-#define MAC_REG_DBF_BASE_HI 0x1C
-#define MAC_REG_ISR_CTL 0x20
-#define MAC_REG_ISR_HOTMR 0x20
-#define MAC_REG_ISR_TSUPTHR 0x20
-#define MAC_REG_ISR_RSUPTHR 0x20
-#define MAC_REG_ISR_CTL1 0x21
-#define MAC_REG_TXE_SR 0x22
-#define MAC_REG_RXE_SR 0x23
-#define MAC_REG_ISR 0x24
-#define MAC_REG_ISR0 0x24
-#define MAC_REG_ISR1 0x25
-#define MAC_REG_ISR2 0x26
-#define MAC_REG_ISR3 0x27
-#define MAC_REG_IMR 0x28
-#define MAC_REG_IMR0 0x28
-#define MAC_REG_IMR1 0x29
-#define MAC_REG_IMR2 0x2A
-#define MAC_REG_IMR3 0x2B
-#define MAC_REG_TDCSR_SET 0x30
-#define MAC_REG_RDCSR_SET 0x32
-#define MAC_REG_TDCSR_CLR 0x34
-#define MAC_REG_RDCSR_CLR 0x36
-#define MAC_REG_RDBASE_LO 0x38
-#define MAC_REG_RDINDX 0x3C
-#define MAC_REG_TDBASE_LO 0x40
-#define MAC_REG_RDCSIZE 0x50
-#define MAC_REG_TDCSIZE 0x52
-#define MAC_REG_TDINDX 0x54
-#define MAC_REG_TDIDX0 0x54
-#define MAC_REG_TDIDX1 0x56
-#define MAC_REG_TDIDX2 0x58
-#define MAC_REG_TDIDX3 0x5A
-#define MAC_REG_PAUSE_TIMER 0x5C
-#define MAC_REG_RBRDU 0x5E
-#define MAC_REG_FIFO_TEST0 0x60
-#define MAC_REG_FIFO_TEST1 0x64
-#define MAC_REG_CAMADDR 0x68
-#define MAC_REG_CAMCR 0x69
-#define MAC_REG_GFTEST 0x6A
-#define MAC_REG_FTSTCMD 0x6B
-#define MAC_REG_MIICFG 0x6C
-#define MAC_REG_MIISR 0x6D
-#define MAC_REG_PHYSR0 0x6E
-#define MAC_REG_PHYSR1 0x6F
-#define MAC_REG_MIICR 0x70
-#define MAC_REG_MIIADR 0x71
-#define MAC_REG_MIIDATA 0x72
-#define MAC_REG_SOFT_TIMER0 0x74
-#define MAC_REG_SOFT_TIMER1 0x76
-#define MAC_REG_CFGA 0x78
-#define MAC_REG_CFGB 0x79
-#define MAC_REG_CFGC 0x7A
-#define MAC_REG_CFGD 0x7B
-#define MAC_REG_DCFG0 0x7C
-#define MAC_REG_DCFG1 0x7D
-#define MAC_REG_MCFG0 0x7E
-#define MAC_REG_MCFG1 0x7F
-
-#define MAC_REG_TBIST 0x80
-#define MAC_REG_RBIST 0x81
-#define MAC_REG_PMCC 0x82
-#define MAC_REG_STICKHW 0x83
-#define MAC_REG_MIBCR 0x84
-#define MAC_REG_EERSV 0x85
-#define MAC_REG_REVID 0x86
-#define MAC_REG_MIBREAD 0x88
-#define MAC_REG_BPMA 0x8C
-#define MAC_REG_EEWR_DATA 0x8C
-#define MAC_REG_BPMD_WR 0x8F
-#define MAC_REG_BPCMD 0x90
-#define MAC_REG_BPMD_RD 0x91
-#define MAC_REG_EECHKSUM 0x92
-#define MAC_REG_EECSR 0x93
-#define MAC_REG_EERD_DATA 0x94
-#define MAC_REG_EADDR 0x96
-#define MAC_REG_EMBCMD 0x97
-#define MAC_REG_JMPSR0 0x98
-#define MAC_REG_JMPSR1 0x99
-#define MAC_REG_JMPSR2 0x9A
-#define MAC_REG_JMPSR3 0x9B
-#define MAC_REG_CHIPGSR 0x9C
-#define MAC_REG_TESTCFG 0x9D
-#define MAC_REG_DEBUG 0x9E
-#define MAC_REG_CHIPGCR 0x9F /* Chip Operation and Diagnostic Control */
-#define MAC_REG_WOLCR0_SET 0xA0
-#define MAC_REG_WOLCR1_SET 0xA1
-#define MAC_REG_PWCFG_SET 0xA2
-#define MAC_REG_WOLCFG_SET 0xA3
-#define MAC_REG_WOLCR0_CLR 0xA4
-#define MAC_REG_WOLCR1_CLR 0xA5
-#define MAC_REG_PWCFG_CLR 0xA6
-#define MAC_REG_WOLCFG_CLR 0xA7
-#define MAC_REG_WOLSR0_SET 0xA8
-#define MAC_REG_WOLSR1_SET 0xA9
-#define MAC_REG_WOLSR0_CLR 0xAC
-#define MAC_REG_WOLSR1_CLR 0xAD
-#define MAC_REG_PATRN_CRC0 0xB0
-#define MAC_REG_PATRN_CRC1 0xB2
-#define MAC_REG_PATRN_CRC2 0xB4
-#define MAC_REG_PATRN_CRC3 0xB6
-#define MAC_REG_PATRN_CRC4 0xB8
-#define MAC_REG_PATRN_CRC5 0xBA
-#define MAC_REG_PATRN_CRC6 0xBC
-#define MAC_REG_PATRN_CRC7 0xBE
-#define MAC_REG_BYTEMSK0_0 0xC0
-#define MAC_REG_BYTEMSK0_1 0xC4
-#define MAC_REG_BYTEMSK0_2 0xC8
-#define MAC_REG_BYTEMSK0_3 0xCC
-#define MAC_REG_BYTEMSK1_0 0xD0
-#define MAC_REG_BYTEMSK1_1 0xD4
-#define MAC_REG_BYTEMSK1_2 0xD8
-#define MAC_REG_BYTEMSK1_3 0xDC
-#define MAC_REG_BYTEMSK2_0 0xE0
-#define MAC_REG_BYTEMSK2_1 0xE4
-#define MAC_REG_BYTEMSK2_2 0xE8
-#define MAC_REG_BYTEMSK2_3 0xEC
-#define MAC_REG_BYTEMSK3_0 0xF0
-#define MAC_REG_BYTEMSK3_1 0xF4
-#define MAC_REG_BYTEMSK3_2 0xF8
-#define MAC_REG_BYTEMSK3_3 0xFC
-
-/*
- * Bits in the RCR register
- */
-
-#define RCR_AS 0x80
-#define RCR_AP 0x40
-#define RCR_AL 0x20
-#define RCR_PROM 0x10
-#define RCR_AB 0x08
-#define RCR_AM 0x04
-#define RCR_AR 0x02
-#define RCR_SEP 0x01
-
-/*
- * Bits in the TCR register
- */
-
-#define TCR_TB2BDIS 0x80
-#define TCR_COLTMC1 0x08
-#define TCR_COLTMC0 0x04
-#define TCR_LB1 0x02 /* loopback[1] */
-#define TCR_LB0 0x01 /* loopback[0] */
-
-/*
- * Bits in the CR0 register
- */
-
-#define CR0_TXON 0x00000008UL
-#define CR0_RXON 0x00000004UL
-#define CR0_STOP 0x00000002UL /* stop MAC, default = 1 */
-#define CR0_STRT 0x00000001UL /* start MAC */
-#define CR0_SFRST 0x00008000UL /* software reset */
-#define CR0_TM1EN 0x00004000UL
-#define CR0_TM0EN 0x00002000UL
-#define CR0_DPOLL 0x00000800UL /* disable rx/tx auto polling */
-#define CR0_DISAU 0x00000100UL
-#define CR0_XONEN 0x00800000UL
-#define CR0_FDXTFCEN 0x00400000UL /* full-duplex TX flow control enable */
-#define CR0_FDXRFCEN 0x00200000UL /* full-duplex RX flow control enable */
-#define CR0_HDXFCEN 0x00100000UL /* half-duplex flow control enable */
-#define CR0_XHITH1 0x00080000UL /* TX XON high threshold 1 */
-#define CR0_XHITH0 0x00040000UL /* TX XON high threshold 0 */
-#define CR0_XLTH1 0x00020000UL /* TX pause frame low threshold 1 */
-#define CR0_XLTH0 0x00010000UL /* TX pause frame low threshold 0 */
-#define CR0_GSPRST 0x80000000UL
-#define CR0_FORSRST 0x40000000UL
-#define CR0_FPHYRST 0x20000000UL
-#define CR0_DIAG 0x10000000UL
-#define CR0_INTPCTL 0x04000000UL
-#define CR0_GINTMSK1 0x02000000UL
-#define CR0_GINTMSK0 0x01000000UL
-
-/*
- * Bits in the CR1 register
- */
-
-#define CR1_SFRST 0x80 /* software reset */
-#define CR1_TM1EN 0x40
-#define CR1_TM0EN 0x20
-#define CR1_DPOLL 0x08 /* disable rx/tx auto polling */
-#define CR1_DISAU 0x01
-
-/*
- * Bits in the CR2 register
- */
-
-#define CR2_XONEN 0x80
-#define CR2_FDXTFCEN 0x40 /* full-duplex TX flow control enable */
-#define CR2_FDXRFCEN 0x20 /* full-duplex RX flow control enable */
-#define CR2_HDXFCEN 0x10 /* half-duplex flow control enable */
-#define CR2_XHITH1 0x08 /* TX XON high threshold 1 */
-#define CR2_XHITH0 0x04 /* TX XON high threshold 0 */
-#define CR2_XLTH1 0x02 /* TX pause frame low threshold 1 */
-#define CR2_XLTH0 0x01 /* TX pause frame low threshold 0 */
-
-/*
- * Bits in the CR3 register
- */
-
-#define CR3_GSPRST 0x80
-#define CR3_FORSRST 0x40
-#define CR3_FPHYRST 0x20
-#define CR3_DIAG 0x10
-#define CR3_INTPCTL 0x04
-#define CR3_GINTMSK1 0x02
-#define CR3_GINTMSK0 0x01
-
-#define ISRCTL_UDPINT 0x8000
-#define ISRCTL_TSUPDIS 0x4000
-#define ISRCTL_RSUPDIS 0x2000
-#define ISRCTL_PMSK1 0x1000
-#define ISRCTL_PMSK0 0x0800
-#define ISRCTL_INTPD 0x0400
-#define ISRCTL_HCRLD 0x0200
-#define ISRCTL_SCRLD 0x0100
-
-/*
- * Bits in the ISR_CTL1 register
- */
-
-#define ISRCTL1_UDPINT 0x80
-#define ISRCTL1_TSUPDIS 0x40
-#define ISRCTL1_RSUPDIS 0x20
-#define ISRCTL1_PMSK1 0x10
-#define ISRCTL1_PMSK0 0x08
-#define ISRCTL1_INTPD 0x04
-#define ISRCTL1_HCRLD 0x02
-#define ISRCTL1_SCRLD 0x01
-
-/*
- * Bits in the TXE_SR register
- */
-
-#define TXESR_TFDBS 0x08
-#define TXESR_TDWBS 0x04
-#define TXESR_TDRBS 0x02
-#define TXESR_TDSTR 0x01
-
-/*
- * Bits in the RXE_SR register
- */
-
-#define RXESR_RFDBS 0x08
-#define RXESR_RDWBS 0x04
-#define RXESR_RDRBS 0x02
-#define RXESR_RDSTR 0x01
-
-/*
- * Bits in the ISR register
- */
-
-#define ISR_ISR3 0x80000000UL
-#define ISR_ISR2 0x40000000UL
-#define ISR_ISR1 0x20000000UL
-#define ISR_ISR0 0x10000000UL
-#define ISR_TXSTLI 0x02000000UL
-#define ISR_RXSTLI 0x01000000UL
-#define ISR_HFLD 0x00800000UL
-#define ISR_UDPI 0x00400000UL
-#define ISR_MIBFI 0x00200000UL
-#define ISR_SHDNI 0x00100000UL
-#define ISR_PHYI 0x00080000UL
-#define ISR_PWEI 0x00040000UL
-#define ISR_TMR1I 0x00020000UL
-#define ISR_TMR0I 0x00010000UL
-#define ISR_SRCI 0x00008000UL
-#define ISR_LSTPEI 0x00004000UL
-#define ISR_LSTEI 0x00002000UL
-#define ISR_OVFI 0x00001000UL
-#define ISR_FLONI 0x00000800UL
-#define ISR_RACEI 0x00000400UL
-#define ISR_TXWB1I 0x00000200UL
-#define ISR_TXWB0I 0x00000100UL
-#define ISR_PTX3I 0x00000080UL
-#define ISR_PTX2I 0x00000040UL
-#define ISR_PTX1I 0x00000020UL
-#define ISR_PTX0I 0x00000010UL
-#define ISR_PTXI 0x00000008UL
-#define ISR_PRXI 0x00000004UL
-#define ISR_PPTXI 0x00000002UL
-#define ISR_PPRXI 0x00000001UL
-
-/*
- * Bits in the IMR register
- */
-
-#define IMR_TXSTLM 0x02000000UL
-#define IMR_UDPIM 0x00400000UL
-#define IMR_MIBFIM 0x00200000UL
-#define IMR_SHDNIM 0x00100000UL
-#define IMR_PHYIM 0x00080000UL
-#define IMR_PWEIM 0x00040000UL
-#define IMR_TMR1IM 0x00020000UL
-#define IMR_TMR0IM 0x00010000UL
-
-#define IMR_SRCIM 0x00008000UL
-#define IMR_LSTPEIM 0x00004000UL
-#define IMR_LSTEIM 0x00002000UL
-#define IMR_OVFIM 0x00001000UL
-#define IMR_FLONIM 0x00000800UL
-#define IMR_RACEIM 0x00000400UL
-#define IMR_TXWB1IM 0x00000200UL
-#define IMR_TXWB0IM 0x00000100UL
-
-#define IMR_PTX3IM 0x00000080UL
-#define IMR_PTX2IM 0x00000040UL
-#define IMR_PTX1IM 0x00000020UL
-#define IMR_PTX0IM 0x00000010UL
-#define IMR_PTXIM 0x00000008UL
-#define IMR_PRXIM 0x00000004UL
-#define IMR_PPTXIM 0x00000002UL
-#define IMR_PPRXIM 0x00000001UL
-
-/* 0x0013FB0FUL = initial value of IMR */
-
-#define INT_MASK_DEF (IMR_PPTXIM|IMR_PPRXIM|IMR_PTXIM|IMR_PRXIM|\
- IMR_PWEIM|IMR_TXWB0IM|IMR_TXWB1IM|IMR_FLONIM|\
- IMR_OVFIM|IMR_LSTEIM|IMR_LSTPEIM|IMR_SRCIM|IMR_MIBFIM|\
- IMR_SHDNIM|IMR_TMR1IM|IMR_TMR0IM|IMR_TXSTLM)
-
-/*
- * Bits in the TDCSR0/1, RDCSR0 register
- */
-
-#define TRDCSR_DEAD 0x0008
-#define TRDCSR_WAK 0x0004
-#define TRDCSR_ACT 0x0002
-#define TRDCSR_RUN 0x0001
-
-/*
- * Bits in the CAMADDR register
- */
-
-#define CAMADDR_CAMEN 0x80
-#define CAMADDR_VCAMSL 0x40
-
-/*
- * Bits in the CAMCR register
- */
-
-#define CAMCR_PS1 0x80
-#define CAMCR_PS0 0x40
-#define CAMCR_AITRPKT 0x20
-#define CAMCR_AITR16 0x10
-#define CAMCR_CAMRD 0x08
-#define CAMCR_CAMWR 0x04
-#define CAMCR_PS_CAM_MASK 0x40
-#define CAMCR_PS_CAM_DATA 0x80
-#define CAMCR_PS_MAR 0x00
-
-/*
- * Bits in the MIICFG register
- */
-
-#define MIICFG_MPO1 0x80
-#define MIICFG_MPO0 0x40
-#define MIICFG_MFDC 0x20
-
-/*
- * Bits in the MIISR register
- */
-
-#define MIISR_MIDLE 0x80
-
-/*
- * Bits in the PHYSR0 register
- */
-
-#define PHYSR0_PHYRST 0x80
-#define PHYSR0_LINKGD 0x40
-#define PHYSR0_FDPX 0x10
-#define PHYSR0_SPDG 0x08
-#define PHYSR0_SPD10 0x04
-#define PHYSR0_RXFLC 0x02
-#define PHYSR0_TXFLC 0x01
-
-/*
- * Bits in the PHYSR1 register
- */
-
-#define PHYSR1_PHYTBI 0x01
-
-/*
- * Bits in the MIICR register
- */
-
-#define MIICR_MAUTO 0x80
-#define MIICR_RCMD 0x40
-#define MIICR_WCMD 0x20
-#define MIICR_MDPM 0x10
-#define MIICR_MOUT 0x08
-#define MIICR_MDO 0x04
-#define MIICR_MDI 0x02
-#define MIICR_MDC 0x01
-
-/*
- * Bits in the MIIADR register
- */
-
-#define MIIADR_SWMPL 0x80
-
-/*
- * Bits in the CFGA register
- */
-
-#define CFGA_PMHCTG 0x08
-#define CFGA_GPIO1PD 0x04
-#define CFGA_ABSHDN 0x02
-#define CFGA_PACPI 0x01
-
-/*
- * Bits in the CFGB register
- */
-
-#define CFGB_GTCKOPT 0x80
-#define CFGB_MIIOPT 0x40
-#define CFGB_CRSEOPT 0x20
-#define CFGB_OFSET 0x10
-#define CFGB_CRANDOM 0x08
-#define CFGB_CAP 0x04
-#define CFGB_MBA 0x02
-#define CFGB_BAKOPT 0x01
-
-/*
- * Bits in the CFGC register
- */
-
-#define CFGC_EELOAD 0x80
-#define CFGC_BROPT 0x40
-#define CFGC_DLYEN 0x20
-#define CFGC_DTSEL 0x10
-#define CFGC_BTSEL 0x08
-#define CFGC_BPS2 0x04 /* bootrom select[2] */
-#define CFGC_BPS1 0x02 /* bootrom select[1] */
-#define CFGC_BPS0 0x01 /* bootrom select[0] */
-
-/*
- * Bits in the CFGD register
- */
-
-#define CFGD_IODIS 0x80
-#define CFGD_MSLVDACEN 0x40
-#define CFGD_CFGDACEN 0x20
-#define CFGD_PCI64EN 0x10
-#define CFGD_HTMRL4 0x08
-
-/*
- * Bits in the DCFG1 register
- */
-
-#define DCFG_XMWI 0x8000
-#define DCFG_XMRM 0x4000
-#define DCFG_XMRL 0x2000
-#define DCFG_PERDIS 0x1000
-#define DCFG_MRWAIT 0x0400
-#define DCFG_MWWAIT 0x0200
-#define DCFG_LATMEN 0x0100
-
-/*
- * Bits in the MCFG0 register
- */
-
-#define MCFG_RXARB 0x0080
-#define MCFG_RFT1 0x0020
-#define MCFG_RFT0 0x0010
-#define MCFG_LOWTHOPT 0x0008
-#define MCFG_PQEN 0x0004
-#define MCFG_RTGOPT 0x0002
-#define MCFG_VIDFR 0x0001
-
-/*
- * Bits in the MCFG1 register
- */
-
-#define MCFG_TXARB 0x8000
-#define MCFG_TXQBK1 0x0800
-#define MCFG_TXQBK0 0x0400
-#define MCFG_TXQNOBK 0x0200
-#define MCFG_SNAPOPT 0x0100
-
-/*
- * Bits in the PMCC register
- */
-
-#define PMCC_DSI 0x80
-#define PMCC_D2_DIS 0x40
-#define PMCC_D1_DIS 0x20
-#define PMCC_D3C_EN 0x10
-#define PMCC_D3H_EN 0x08
-#define PMCC_D2_EN 0x04
-#define PMCC_D1_EN 0x02
-#define PMCC_D0_EN 0x01
-
-/*
- * Bits in STICKHW
- */
-
-#define STICKHW_SWPTAG 0x10
-#define STICKHW_WOLSR 0x08
-#define STICKHW_WOLEN 0x04
-#define STICKHW_DS1 0x02 /* R/W by software/cfg cycle */
-#define STICKHW_DS0 0x01 /* suspend well DS write port */
-
-/*
- * Bits in the MIBCR register
- */
-
-#define MIBCR_MIBISTOK 0x80
-#define MIBCR_MIBISTGO 0x40
-#define MIBCR_MIBINC 0x20
-#define MIBCR_MIBHI 0x10
-#define MIBCR_MIBFRZ 0x08
-#define MIBCR_MIBFLSH 0x04
-#define MIBCR_MPTRINI 0x02
-#define MIBCR_MIBCLR 0x01
-
-/*
- * Bits in the EERSV register
- */
-
-#define EERSV_BOOT_RPL ((u8) 0x01) /* Boot method selection for VT6110 */
-
-#define EERSV_BOOT_MASK ((u8) 0x06)
-#define EERSV_BOOT_INT19 ((u8) 0x00)
-#define EERSV_BOOT_INT18 ((u8) 0x02)
-#define EERSV_BOOT_LOCAL ((u8) 0x04)
-#define EERSV_BOOT_BEV ((u8) 0x06)
-
-
-/*
- * Bits in BPCMD
- */
-
-#define BPCMD_BPDNE 0x80
-#define BPCMD_EBPWR 0x02
-#define BPCMD_EBPRD 0x01
-
-/*
- * Bits in the EECSR register
- */
-
-#define EECSR_EMBP 0x40 /* eeprom embedded programming */
-#define EECSR_RELOAD 0x20 /* eeprom content reload */
-#define EECSR_DPM 0x10 /* eeprom direct programming */
-#define EECSR_ECS 0x08 /* eeprom CS pin */
-#define EECSR_ECK 0x04 /* eeprom CK pin */
-#define EECSR_EDI 0x02 /* eeprom DI pin */
-#define EECSR_EDO 0x01 /* eeprom DO pin */
-
-/*
- * Bits in the EMBCMD register
- */
-
-#define EMBCMD_EDONE 0x80
-#define EMBCMD_EWDIS 0x08
-#define EMBCMD_EWEN 0x04
-#define EMBCMD_EWR 0x02
-#define EMBCMD_ERD 0x01
-
-/*
- * Bits in TESTCFG register
- */
-
-#define TESTCFG_HBDIS 0x80
-
-/*
- * Bits in CHIPGCR register
- */
-
-#define CHIPGCR_FCGMII 0x80 /* force GMII (else MII only) */
-#define CHIPGCR_FCFDX 0x40 /* force full duplex */
-#define CHIPGCR_FCRESV 0x20
-#define CHIPGCR_FCMODE 0x10 /* enable MAC forced mode */
-#define CHIPGCR_LPSOPT 0x08
-#define CHIPGCR_TM1US 0x04
-#define CHIPGCR_TM0US 0x02
-#define CHIPGCR_PHYINTEN 0x01
-
-/*
- * Bits in WOLCR0
- */
-
-#define WOLCR_MSWOLEN7 0x0080 /* enable pattern match filtering */
-#define WOLCR_MSWOLEN6 0x0040
-#define WOLCR_MSWOLEN5 0x0020
-#define WOLCR_MSWOLEN4 0x0010
-#define WOLCR_MSWOLEN3 0x0008
-#define WOLCR_MSWOLEN2 0x0004
-#define WOLCR_MSWOLEN1 0x0002
-#define WOLCR_MSWOLEN0 0x0001
-#define WOLCR_ARP_EN 0x0001
-
-/*
- * Bits in WOLCR1
- */
-
-#define WOLCR_LINKOFF_EN 0x0800 /* link off detected enable */
-#define WOLCR_LINKON_EN 0x0400 /* link on detected enable */
-#define WOLCR_MAGIC_EN 0x0200 /* magic packet filter enable */
-#define WOLCR_UNICAST_EN 0x0100 /* unicast filter enable */
-
-
-/*
- * Bits in PWCFG
- */
-
-#define PWCFG_PHYPWOPT 0x80 /* internal MII I/F timing */
-#define PWCFG_PCISTICK 0x40 /* PCI sticky R/W enable */
-#define PWCFG_WOLTYPE 0x20 /* pulse(1) or button (0) */
-#define PWCFG_LEGCY_WOL 0x10
-#define PWCFG_PMCSR_PME_SR 0x08
-#define PWCFG_PMCSR_PME_EN 0x04 /* control by PCISTICK */
-#define PWCFG_LEGACY_WOLSR 0x02 /* Legacy WOL_SR shadow */
-#define PWCFG_LEGACY_WOLEN 0x01 /* Legacy WOL_EN shadow */
-
-/*
- * Bits in WOLCFG
- */
-
-#define WOLCFG_PMEOVR 0x80 /* for legacy use, force PMEEN always */
-#define WOLCFG_SAM 0x20 /* accept multicast case reset, default=0 */
-#define WOLCFG_SAB 0x10 /* accept broadcast case reset, default=0 */
-#define WOLCFG_SMIIACC 0x08 /* ?? */
-#define WOLCFG_SGENWH 0x02
-#define WOLCFG_PHYINTEN 0x01 /* 0:PHYINT trigger enable, 1:use internal MII
- to report status change */
-/*
- * Bits in WOLSR1
- */
-
-#define WOLSR_LINKOFF_INT 0x0800
-#define WOLSR_LINKON_INT 0x0400
-#define WOLSR_MAGIC_INT 0x0200
-#define WOLSR_UNICAST_INT 0x0100
-
-/*
- * Ethernet address filter type
- */
-
-#define PKT_TYPE_NONE 0x0000 /* Turn off receiver */
-#define PKT_TYPE_DIRECTED 0x0001 /* obselete, directed address is always accepted */
-#define PKT_TYPE_MULTICAST 0x0002
-#define PKT_TYPE_ALL_MULTICAST 0x0004
-#define PKT_TYPE_BROADCAST 0x0008
-#define PKT_TYPE_PROMISCUOUS 0x0020
-#define PKT_TYPE_LONG 0x2000 /* NOTE.... the definition of LONG is >2048 bytes in our chip */
-#define PKT_TYPE_RUNT 0x4000
-#define PKT_TYPE_ERROR 0x8000 /* Accept error packets, e.g. CRC error */
-
-/*
- * Loopback mode
- */
-
-#define MAC_LB_NONE 0x00
-#define MAC_LB_INTERNAL 0x01
-#define MAC_LB_EXTERNAL 0x02
-
-/*
- * Enabled mask value of irq
- */
-
-#if defined(_SIM)
-#define IMR_MASK_VALUE 0x0033FF0FUL /* initial value of IMR
- set IMR0 to 0x0F according to spec */
-
-#else
-#define IMR_MASK_VALUE 0x0013FB0FUL /* initial value of IMR
- ignore MIBFI,RACEI to
- reduce intr. frequency
- NOTE.... do not enable NoBuf int mask at driver driver
- when (1) NoBuf -> RxThreshold = SF
- (2) OK -> RxThreshold = original value
- */
-#endif
-
-/*
- * Revision id
- */
-
-#define REV_ID_VT3119_A0 0x00
-#define REV_ID_VT3119_A1 0x01
-#define REV_ID_VT3216_A0 0x10
-
-/*
- * Max time out delay time
- */
-
-#define W_MAX_TIMEOUT 0x0FFFU
-
-
-/*
- * MAC registers as a structure. Cannot be directly accessed this
- * way but generates offsets for readl/writel() calls
- */
-
-struct mac_regs {
- volatile u8 PAR[6]; /* 0x00 */
- volatile u8 RCR;
- volatile u8 TCR;
-
- volatile __le32 CR0Set; /* 0x08 */
- volatile __le32 CR0Clr; /* 0x0C */
-
- volatile u8 MARCAM[8]; /* 0x10 */
-
- volatile __le32 DecBaseHi; /* 0x18 */
- volatile __le16 DbfBaseHi; /* 0x1C */
- volatile __le16 reserved_1E;
-
- volatile __le16 ISRCTL; /* 0x20 */
- volatile u8 TXESR;
- volatile u8 RXESR;
-
- volatile __le32 ISR; /* 0x24 */
- volatile __le32 IMR;
-
- volatile __le32 TDStatusPort; /* 0x2C */
-
- volatile __le16 TDCSRSet; /* 0x30 */
- volatile u8 RDCSRSet;
- volatile u8 reserved_33;
- volatile __le16 TDCSRClr;
- volatile u8 RDCSRClr;
- volatile u8 reserved_37;
-
- volatile __le32 RDBaseLo; /* 0x38 */
- volatile __le16 RDIdx; /* 0x3C */
- volatile u8 TQETMR; /* 0x3E, VT3216 and above only */
- volatile u8 RQETMR; /* 0x3F, VT3216 and above only */
-
- volatile __le32 TDBaseLo[4]; /* 0x40 */
-
- volatile __le16 RDCSize; /* 0x50 */
- volatile __le16 TDCSize; /* 0x52 */
- volatile __le16 TDIdx[4]; /* 0x54 */
- volatile __le16 tx_pause_timer; /* 0x5C */
- volatile __le16 RBRDU; /* 0x5E */
-
- volatile __le32 FIFOTest0; /* 0x60 */
- volatile __le32 FIFOTest1; /* 0x64 */
-
- volatile u8 CAMADDR; /* 0x68 */
- volatile u8 CAMCR; /* 0x69 */
- volatile u8 GFTEST; /* 0x6A */
- volatile u8 FTSTCMD; /* 0x6B */
-
- volatile u8 MIICFG; /* 0x6C */
- volatile u8 MIISR;
- volatile u8 PHYSR0;
- volatile u8 PHYSR1;
- volatile u8 MIICR;
- volatile u8 MIIADR;
- volatile __le16 MIIDATA;
-
- volatile __le16 SoftTimer0; /* 0x74 */
- volatile __le16 SoftTimer1;
-
- volatile u8 CFGA; /* 0x78 */
- volatile u8 CFGB;
- volatile u8 CFGC;
- volatile u8 CFGD;
-
- volatile __le16 DCFG; /* 0x7C */
- volatile __le16 MCFG;
-
- volatile u8 TBIST; /* 0x80 */
- volatile u8 RBIST;
- volatile u8 PMCPORT;
- volatile u8 STICKHW;
-
- volatile u8 MIBCR; /* 0x84 */
- volatile u8 reserved_85;
- volatile u8 rev_id;
- volatile u8 PORSTS;
-
- volatile __le32 MIBData; /* 0x88 */
-
- volatile __le16 EEWrData;
-
- volatile u8 reserved_8E;
- volatile u8 BPMDWr;
- volatile u8 BPCMD;
- volatile u8 BPMDRd;
-
- volatile u8 EECHKSUM; /* 0x92 */
- volatile u8 EECSR;
-
- volatile __le16 EERdData; /* 0x94 */
- volatile u8 EADDR;
- volatile u8 EMBCMD;
-
-
- volatile u8 JMPSR0; /* 0x98 */
- volatile u8 JMPSR1;
- volatile u8 JMPSR2;
- volatile u8 JMPSR3;
- volatile u8 CHIPGSR; /* 0x9C */
- volatile u8 TESTCFG;
- volatile u8 DEBUG;
- volatile u8 CHIPGCR;
-
- volatile __le16 WOLCRSet; /* 0xA0 */
- volatile u8 PWCFGSet;
- volatile u8 WOLCFGSet;
-
- volatile __le16 WOLCRClr; /* 0xA4 */
- volatile u8 PWCFGCLR;
- volatile u8 WOLCFGClr;
-
- volatile __le16 WOLSRSet; /* 0xA8 */
- volatile __le16 reserved_AA;
-
- volatile __le16 WOLSRClr; /* 0xAC */
- volatile __le16 reserved_AE;
-
- volatile __le16 PatternCRC[8]; /* 0xB0 */
- volatile __le32 ByteMask[4][4]; /* 0xC0 */
-};
-
-
-enum hw_mib {
- HW_MIB_ifRxAllPkts = 0,
- HW_MIB_ifRxOkPkts,
- HW_MIB_ifTxOkPkts,
- HW_MIB_ifRxErrorPkts,
- HW_MIB_ifRxRuntOkPkt,
- HW_MIB_ifRxRuntErrPkt,
- HW_MIB_ifRx64Pkts,
- HW_MIB_ifTx64Pkts,
- HW_MIB_ifRx65To127Pkts,
- HW_MIB_ifTx65To127Pkts,
- HW_MIB_ifRx128To255Pkts,
- HW_MIB_ifTx128To255Pkts,
- HW_MIB_ifRx256To511Pkts,
- HW_MIB_ifTx256To511Pkts,
- HW_MIB_ifRx512To1023Pkts,
- HW_MIB_ifTx512To1023Pkts,
- HW_MIB_ifRx1024To1518Pkts,
- HW_MIB_ifTx1024To1518Pkts,
- HW_MIB_ifTxEtherCollisions,
- HW_MIB_ifRxPktCRCE,
- HW_MIB_ifRxJumboPkts,
- HW_MIB_ifTxJumboPkts,
- HW_MIB_ifRxMacControlFrames,
- HW_MIB_ifTxMacControlFrames,
- HW_MIB_ifRxPktFAE,
- HW_MIB_ifRxLongOkPkt,
- HW_MIB_ifRxLongPktErrPkt,
- HW_MIB_ifTXSQEErrors,
- HW_MIB_ifRxNobuf,
- HW_MIB_ifRxSymbolErrors,
- HW_MIB_ifInRangeLengthErrors,
- HW_MIB_ifLateCollisions,
- HW_MIB_SIZE
-};
-
-enum chip_type {
- CHIP_TYPE_VT6110 = 1,
-};
-
-struct velocity_info_tbl {
- enum chip_type chip_id;
- const char *name;
- int txqueue;
- u32 flags;
-};
-
-#define mac_hw_mibs_init(regs) {\
- BYTE_REG_BITS_ON(MIBCR_MIBFRZ,&((regs)->MIBCR));\
- BYTE_REG_BITS_ON(MIBCR_MIBCLR,&((regs)->MIBCR));\
- do {}\
- while (BYTE_REG_BITS_IS_ON(MIBCR_MIBCLR,&((regs)->MIBCR)));\
- BYTE_REG_BITS_OFF(MIBCR_MIBFRZ,&((regs)->MIBCR));\
-}
-
-#define mac_read_isr(regs) readl(&((regs)->ISR))
-#define mac_write_isr(regs, x) writel((x),&((regs)->ISR))
-#define mac_clear_isr(regs) writel(0xffffffffL,&((regs)->ISR))
-
-#define mac_write_int_mask(mask, regs) writel((mask),&((regs)->IMR));
-#define mac_disable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Clr))
-#define mac_enable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Set))
-
-#define mac_set_dma_length(regs, n) {\
- BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\
-}
-
-#define mac_set_rx_thresh(regs, n) {\
- BYTE_REG_BITS_SET((n),(MCFG_RFT0|MCFG_RFT1),&((regs)->MCFG));\
-}
-
-#define mac_rx_queue_run(regs) {\
- writeb(TRDCSR_RUN, &((regs)->RDCSRSet));\
-}
-
-#define mac_rx_queue_wake(regs) {\
- writeb(TRDCSR_WAK, &((regs)->RDCSRSet));\
-}
-
-#define mac_tx_queue_run(regs, n) {\
- writew(TRDCSR_RUN<<((n)*4),&((regs)->TDCSRSet));\
-}
-
-#define mac_tx_queue_wake(regs, n) {\
- writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\
-}
-
-static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) {
- int i=0;
-
- BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR));
- do {
- udelay(10);
- if (i++>0x1000)
- break;
- } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR)));
-}
-
-/*
- * Header for WOL definitions. Used to compute hashes
- */
-
-typedef u8 MCAM_ADDR[ETH_ALEN];
-
-struct arp_packet {
- u8 dest_mac[ETH_ALEN];
- u8 src_mac[ETH_ALEN];
- __be16 type;
- __be16 ar_hrd;
- __be16 ar_pro;
- u8 ar_hln;
- u8 ar_pln;
- __be16 ar_op;
- u8 ar_sha[ETH_ALEN];
- u8 ar_sip[4];
- u8 ar_tha[ETH_ALEN];
- u8 ar_tip[4];
-} __packed;
-
-struct _magic_packet {
- u8 dest_mac[6];
- u8 src_mac[6];
- __be16 type;
- u8 MAC[16][6];
- u8 password[6];
-} __packed;
-
-/*
- * Store for chip context when saving and restoring status. Not
- * all fields are saved/restored currently.
- */
-
-struct velocity_context {
- u8 mac_reg[256];
- MCAM_ADDR cam_addr[MCAM_SIZE];
- u16 vcam[VCAM_SIZE];
- u32 cammask[2];
- u32 patcrc[2];
- u32 pattern[8];
-};
-
-/*
- * Registers in the MII (offset unit is WORD)
- */
-
-// Marvell 88E1000/88E1000S
-#define MII_REG_PSCR 0x10 // PHY specific control register
-
-//
-// Bits in the Silicon revision register
-//
-
-#define TCSR_ECHODIS 0x2000 //
-#define AUXCR_MDPPS 0x0004 //
-
-// Bits in the PLED register
-#define PLED_LALBE 0x0004 //
-
-// Marvell 88E1000/88E1000S Bits in the PHY specific control register (10h)
-#define PSCR_ACRSTX 0x0800 // Assert CRS on Transmit
-
-#define PHYID_CICADA_CS8201 0x000FC410UL
-#define PHYID_VT3216_32BIT 0x000FC610UL
-#define PHYID_VT3216_64BIT 0x000FC600UL
-#define PHYID_MARVELL_1000 0x01410C50UL
-#define PHYID_MARVELL_1000S 0x01410C40UL
-
-#define PHYID_REV_ID_MASK 0x0000000FUL
-
-#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK)
-
-#define MII_REG_BITS_ON(x,i,p) do {\
- u16 w;\
- velocity_mii_read((p),(i),&(w));\
- (w)|=(x);\
- velocity_mii_write((p),(i),(w));\
-} while (0)
-
-#define MII_REG_BITS_OFF(x,i,p) do {\
- u16 w;\
- velocity_mii_read((p),(i),&(w));\
- (w)&=(~(x));\
- velocity_mii_write((p),(i),(w));\
-} while (0)
-
-#define MII_REG_BITS_IS_ON(x,i,p) ({\
- u16 w;\
- velocity_mii_read((p),(i),&(w));\
- ((int) ((w) & (x)));})
-
-#define MII_GET_PHY_ID(p) ({\
- u32 id;\
- velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
- velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
- (id);})
-
-/*
- * Inline debug routine
- */
-
-
-enum velocity_msg_level {
- MSG_LEVEL_ERR = 0, //Errors that will cause abnormal operation.
- MSG_LEVEL_NOTICE = 1, //Some errors need users to be notified.
- MSG_LEVEL_INFO = 2, //Normal message.
- MSG_LEVEL_VERBOSE = 3, //Will report all trival errors.
- MSG_LEVEL_DEBUG = 4 //Only for debug purpose.
-};
-
-#ifdef VELOCITY_DEBUG
-#define ASSERT(x) { \
- if (!(x)) { \
- printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\
- __func__, __LINE__);\
- BUG(); \
- }\
-}
-#define VELOCITY_DBG(p,args...) printk(p, ##args)
-#else
-#define ASSERT(x)
-#define VELOCITY_DBG(x)
-#endif
-
-#define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0)
-
-#define VELOCITY_PRT_CAMMASK(p,t) {\
- int i;\
- if ((t)==VELOCITY_MULTICAST_CAM) {\
- for (i=0;i<(MCAM_SIZE/8);i++)\
- printk("%02X",(p)->mCAMmask[i]);\
- }\
- else {\
- for (i=0;i<(VCAM_SIZE/8);i++)\
- printk("%02X",(p)->vCAMmask[i]);\
- }\
- printk("\n");\
-}
-
-
-
-#define VELOCITY_WOL_MAGIC 0x00000000UL
-#define VELOCITY_WOL_PHY 0x00000001UL
-#define VELOCITY_WOL_ARP 0x00000002UL
-#define VELOCITY_WOL_UCAST 0x00000004UL
-#define VELOCITY_WOL_BCAST 0x00000010UL
-#define VELOCITY_WOL_MCAST 0x00000020UL
-#define VELOCITY_WOL_MAGIC_SEC 0x00000040UL
-
-/*
- * Flags for options
- */
-
-#define VELOCITY_FLAGS_TAGGING 0x00000001UL
-#define VELOCITY_FLAGS_RX_CSUM 0x00000004UL
-#define VELOCITY_FLAGS_IP_ALIGN 0x00000008UL
-#define VELOCITY_FLAGS_VAL_PKT_LEN 0x00000010UL
-
-#define VELOCITY_FLAGS_FLOW_CTRL 0x01000000UL
-
-/*
- * Flags for driver status
- */
-
-#define VELOCITY_FLAGS_OPENED 0x00010000UL
-#define VELOCITY_FLAGS_VMNS_CONNECTED 0x00020000UL
-#define VELOCITY_FLAGS_VMNS_COMMITTED 0x00040000UL
-#define VELOCITY_FLAGS_WOL_ENABLED 0x00080000UL
-
-/*
- * Flags for MII status
- */
-
-#define VELOCITY_LINK_FAIL 0x00000001UL
-#define VELOCITY_SPEED_10 0x00000002UL
-#define VELOCITY_SPEED_100 0x00000004UL
-#define VELOCITY_SPEED_1000 0x00000008UL
-#define VELOCITY_DUPLEX_FULL 0x00000010UL
-#define VELOCITY_AUTONEG_ENABLE 0x00000020UL
-#define VELOCITY_FORCED_BY_EEPROM 0x00000040UL
-
-/*
- * For velocity_set_media_duplex
- */
-
-#define VELOCITY_LINK_CHANGE 0x00000001UL
-
-enum speed_opt {
- SPD_DPX_AUTO = 0,
- SPD_DPX_100_HALF = 1,
- SPD_DPX_100_FULL = 2,
- SPD_DPX_10_HALF = 3,
- SPD_DPX_10_FULL = 4,
- SPD_DPX_1000_FULL = 5
-};
-
-enum velocity_init_type {
- VELOCITY_INIT_COLD = 0,
- VELOCITY_INIT_RESET,
- VELOCITY_INIT_WOL
-};
-
-enum velocity_flow_cntl_type {
- FLOW_CNTL_DEFAULT = 1,
- FLOW_CNTL_TX,
- FLOW_CNTL_RX,
- FLOW_CNTL_TX_RX,
- FLOW_CNTL_DISABLE,
-};
-
-struct velocity_opt {
- int numrx; /* Number of RX descriptors */
- int numtx; /* Number of TX descriptors */
- enum speed_opt spd_dpx; /* Media link mode */
-
- int DMA_length; /* DMA length */
- int rx_thresh; /* RX_THRESH */
- int flow_cntl;
- int wol_opts; /* Wake on lan options */
- int td_int_count;
- int int_works;
- int rx_bandwidth_hi;
- int rx_bandwidth_lo;
- int rx_bandwidth_en;
- int rxqueue_timer;
- int txqueue_timer;
- int tx_intsup;
- int rx_intsup;
- u32 flags;
-};
-
-#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->tx.used[(q)]))
-
-#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx])
-
-struct velocity_info {
- struct pci_dev *pdev;
- struct net_device *dev;
-
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u8 ip_addr[4];
- enum chip_type chip_id;
-
- struct mac_regs __iomem * mac_regs;
- unsigned long memaddr;
- unsigned long ioaddr;
-
- struct tx_info {
- int numq;
-
- /* FIXME: the locality of the data seems rather poor. */
- int used[TX_QUEUE_NO];
- int curr[TX_QUEUE_NO];
- int tail[TX_QUEUE_NO];
- struct tx_desc *rings[TX_QUEUE_NO];
- struct velocity_td_info *infos[TX_QUEUE_NO];
- dma_addr_t pool_dma[TX_QUEUE_NO];
- } tx;
-
- struct rx_info {
- int buf_sz;
-
- int dirty;
- int curr;
- u32 filled;
- struct rx_desc *ring;
- struct velocity_rd_info *info; /* It's an array */
- dma_addr_t pool_dma;
- } rx;
-
- u32 mib_counter[MAX_HW_MIB_COUNTER];
- struct velocity_opt options;
-
- u32 int_mask;
-
- u32 flags;
-
- u32 mii_status;
- u32 phy_id;
- int multicast_limit;
-
- u8 vCAMmask[(VCAM_SIZE / 8)];
- u8 mCAMmask[(MCAM_SIZE / 8)];
-
- spinlock_t lock;
-
- int wol_opts;
- u8 wol_passwd[6];
-
- struct velocity_context context;
-
- u32 ticks;
-
- u8 rev_id;
-
- struct napi_struct napi;
-};
-
-/**
- * velocity_get_ip - find an IP address for the device
- * @vptr: Velocity to query
- *
- * Dig out an IP address for this interface so that we can
- * configure wakeup with WOL for ARP. If there are multiple IP
- * addresses on this chain then we use the first - multi-IP WOL is not
- * supported.
- *
- */
-
-static inline int velocity_get_ip(struct velocity_info *vptr)
-{
- struct in_device *in_dev;
- struct in_ifaddr *ifa;
- int res = -ENOENT;
-
- rcu_read_lock();
- in_dev = __in_dev_get_rcu(vptr->dev);
- if (in_dev != NULL) {
- ifa = (struct in_ifaddr *) in_dev->ifa_list;
- if (ifa != NULL) {
- memcpy(vptr->ip_addr, &ifa->ifa_address, 4);
- res = 0;
- }
- }
- rcu_read_unlock();
- return res;
-}
-
-/**
- * velocity_update_hw_mibs - fetch MIB counters from chip
- * @vptr: velocity to update
- *
- * The velocity hardware keeps certain counters in the hardware
- * side. We need to read these when the user asks for statistics
- * or when they overflow (causing an interrupt). The read of the
- * statistic clears it, so we keep running master counters in user
- * space.
- */
-
-static inline void velocity_update_hw_mibs(struct velocity_info *vptr)
-{
- u32 tmp;
- int i;
- BYTE_REG_BITS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR));
-
- while (BYTE_REG_BITS_IS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR)));
-
- BYTE_REG_BITS_ON(MIBCR_MPTRINI, &(vptr->mac_regs->MIBCR));
- for (i = 0; i < HW_MIB_SIZE; i++) {
- tmp = readl(&(vptr->mac_regs->MIBData)) & 0x00FFFFFFUL;
- vptr->mib_counter[i] += tmp;
- }
-}
-
-/**
- * init_flow_control_register - set up flow control
- * @vptr: velocity to configure
- *
- * Configure the flow control registers for this velocity device.
- */
-
-static inline void init_flow_control_register(struct velocity_info *vptr)
-{
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
- /* Set {XHITH1, XHITH0, XLTH1, XLTH0} in FlowCR1 to {1, 0, 1, 1}
- depend on RD=64, and Turn on XNOEN in FlowCR1 */
- writel((CR0_XONEN | CR0_XHITH1 | CR0_XLTH1 | CR0_XLTH0), ®s->CR0Set);
- writel((CR0_FDXTFCEN | CR0_FDXRFCEN | CR0_HDXFCEN | CR0_XHITH0), ®s->CR0Clr);
-
- /* Set TxPauseTimer to 0xFFFF */
- writew(0xFFFF, ®s->tx_pause_timer);
-
- /* Initialize RBRDU to Rx buffer count. */
- writew(vptr->options.numrx, ®s->RBRDU);
-}
-
-
-#endif