From: Luciano Coelho Date: Wed, 11 Apr 2012 07:15:46 +0000 (+0300) Subject: wlcore/wl12xx: add command trigger and event ack operations X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f16ff75872b04fa6c779367ae24146c8a1729f2e;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git wlcore/wl12xx: add command trigger and event ack operations Different chips may use different bits in the interrupt trigger register. Add operations to handle these differences. Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index cef2884b37c8..8d82203d3da8 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -571,6 +571,16 @@ out: return ret; } +static void wl12xx_trigger_cmd(struct wl1271 *wl) +{ + wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD); +} + +static void wl12xx_ack_event(struct wl1271 *wl) +{ + wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_EVENT_ACK); +} + static bool wl12xx_mac_in_fuse(struct wl1271 *wl) { bool supported = false; @@ -637,6 +647,8 @@ static void wl12xx_get_mac(struct wl1271 *wl) static struct wlcore_ops wl12xx_ops = { .identify_chip = wl12xx_identify_chip, .boot = wl12xx_boot, + .trigger_cmd = wl12xx_trigger_cmd, + .ack_event = wl12xx_ack_event, .get_pg_ver = wl12xx_get_pg_ver, .get_mac = wl12xx_get_mac, }; diff --git a/drivers/net/wireless/ti/wl12xx/reg.h b/drivers/net/wireless/ti/wl12xx/reg.h index 003041bdb5f7..79ede02e2587 100644 --- a/drivers/net/wireless/ti/wl12xx/reg.h +++ b/drivers/net/wireless/ti/wl12xx/reg.h @@ -490,6 +490,22 @@ enum { /* end PLL configuration algorithm for wl128x */ +/* + * Host Command Interrupt. Setting this bit masks + * the interrupt that the host issues to inform + * the FW that it has sent a command + * to the Wlan hardware Command Mailbox. + */ +#define WL12XX_INTR_TRIG_CMD BIT(0) + +/* + * Host Event Acknowlegde Interrupt. The host + * sets this bit to acknowledge that it received + * the unsolicited information from the event + * mailbox. + */ +#define WL12XX_INTR_TRIG_EVENT_ACK BIT(1) + /*=============================================== HI_CFG Interface Configuration Register Values ------------------------------------------ diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 3ec86e96f5c7..e80f674e77cc 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -66,7 +66,11 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, wl1271_write(wl, wl->cmd_box_addr, buf, len, false); - wlcore_write_reg(wl, REG_INTERRUPT_TRIG, INTR_TRIG_CMD); + /* + * TODO: we just need this because one bit is in a different + * place. Is there any better way? + */ + wl->ops->trigger_cmd(wl); timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index 078cb012fcca..e3f572cbdf9a 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -305,8 +305,11 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) if (ret < 0) return ret; - /* then we let the firmware know it can go on...*/ - wlcore_write_reg(wl, REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK); + /* + * TODO: we just need this because one bit is in a different + * place. Is there any better way? + */ + wl->ops->ack_event(wl); return 0; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 38d1ed2967c8..76c27dd93c20 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -30,6 +30,8 @@ struct wlcore_ops { int (*identify_chip)(struct wl1271 *wl); int (*boot)(struct wl1271 *wl); + void (*trigger_cmd)(struct wl1271 *wl); + void (*ack_event)(struct wl1271 *wl); s8 (*get_pg_ver)(struct wl1271 *wl); void (*get_mac)(struct wl1271 *wl); }; @@ -344,22 +346,6 @@ int wlcore_free_hw(struct wl1271 *wl); /* Hardware to Embedded CPU Interrupts - first 32-bit register set */ -/* - * Host Command Interrupt. Setting this bit masks - * the interrupt that the host issues to inform - * the FW that it has sent a command - * to the Wlan hardware Command Mailbox. - */ -#define INTR_TRIG_CMD BIT(0) - -/* - * Host Event Acknowlegde Interrupt. The host - * sets this bit to acknowledge that it received - * the unsolicited information from the event - * mailbox. - */ -#define INTR_TRIG_EVENT_ACK BIT(1) - /* * The host sets this bit to inform the Wlan * FW that a TX packet is in the XFER