From: Mark Rustad Date: Fri, 16 Oct 2015 20:27:49 +0000 (-0700) Subject: ixgbe: Prevent KR PHY reset in ixgbe_init_phy_ops_x550em X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=f164b84529e3bf9ae43882fd3ac84bef94d104cf;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ixgbe: Prevent KR PHY reset in ixgbe_init_phy_ops_x550em This patch removes KR PHY reset from ixgbe_init_phy_ops_x550em, since this function is meant to initialize function pointers for the detected PHY type. Internal PHY reset was moved to ixgbe_setup_internal_phy_t_x550em which will now detect which mode the internal PHY operates in and set it up as required. Signed-off-by: Mark Rustad Tested-by: Darin Miller Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index bf2ae8daf717..a9c73b75a902 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1727,6 +1727,12 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) return IXGBE_ERR_CONFIG; + if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + return ixgbe_setup_kr_speed_x550em(hw, speed); + } + /* If link is not up, then there is no setup necessary so return */ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); if (status) @@ -1931,7 +1937,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { struct ixgbe_phy_info *phy = &hw->phy; - ixgbe_link_speed speed; s32 ret_val; hw->mac.ops.set_lan_id(hw); @@ -1944,10 +1949,6 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) * to determine internal PHY mode. */ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - } } /* Identify the PHY or SFP module */ @@ -1979,14 +1980,8 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) /* If internal link mode is XFI, then setup iXFI internal link, * else setup KR now. */ - if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { - phy->ops.setup_internal_link = - ixgbe_setup_internal_phy_t_x550em; - } else { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); - } + phy->ops.setup_internal_link = + ixgbe_setup_internal_phy_t_x550em; /* setup SW LPLU only for first revision */ if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,