From: Anton Vorontsov Date: Tue, 24 Aug 2010 21:46:12 +0000 (-0700) Subject: phylib: Fix race between returning phydev and calling adjust_link X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ef24b16b5d67c815874ed2d0e2581db629661ba3;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git phylib: Fix race between returning phydev and calling adjust_link It is possible that phylib will call adjust_link before returning from {,of_}phy_connect(), which may cause the following [very rare, though] oops upon reopening the device: Unable to handle kernel paging request for data at address 0x0000024c Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0 P1021 RDB Modules linked in: NIP: c0345dac LR: c0345dac CTR: c0345d84 TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0 [...] NIP [c0345dac] adjust_link+0x28/0x19c LR [c0345dac] adjust_link+0x28/0x19c Call Trace: [c0d25f00] [000045e1] 0x45e1 (unreliable) [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554 [...] Here is why. Drivers store phydev in their private structures, e.g. gianfar driver: static int init_phy(struct net_device *dev) { ... priv->phydev = of_phy_connect(...); ... } So that adjust_link could retrieve it back: static void adjust_link(struct net_device *dev) { ... struct phy_device *phydev = priv->phydev; ... } If the device has been opened before, then phydev->state is set to PHY_HALTED (or undefined if the driver didn't call phy_stop()). Now, phy_connect starts the PHY state machine before returning phydev to the driver: phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; The time between 'phy_start_machine()' and 'return phydev' is undefined. The start machine routine delays execution for 1 second, which is enough for most cases. But under heavy load, or if you're unlucky, it is quite possible that PHY state machine will execute before phy_connect() returns, and so adjust_link callback will try to dereference phydev, which is not yet ready. To fix the issue, simply initialize the PHY's state to PHY_READY during phy_attach(). This will ensure that phylib won't call adjust_link before phy_start(). Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c0761197c07..16ddc77313c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -466,6 +466,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev->interface = interface; + phydev->state = PHY_READY; + /* Do initial configuration here, now that * we have certain key parameters * (dev_flags and interface) */