From: Thierry Reding <treding@nvidia.com>
Date: Mon, 8 Dec 2014 14:38:17 +0000 (+0100)
Subject: drm/panel: sharp: lq101r1sx01: Respect power timings
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ee920bca27da6c33de6ee73de7b34dee0298f703;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

drm/panel: sharp: lq101r1sx01: Respect power timings

Before shutting down the display using the DCS display_off command, wait
for 4 frames according to the datasheet.

Furthermore, after enabling the power supply, the supply voltage needs
around 10 ms to settle. After that, another 120 ms is required before a
DCS exit_sleep_mode command can be sent.

While at it, no longer send the DCS soft_reset command. This is totally
unnecessary because we've just powered up the display, hence it will be
in a reset state already.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---

diff --git a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c
index 8a11e83ab582..745ceb1ef36e 100644
--- a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c
+++ b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c
@@ -116,6 +116,8 @@ static int sharp_panel_unprepare(struct drm_panel *panel)
 	if (!sharp->prepared)
 		return 0;
 
+	sharp_wait_frames(sharp, 4);
+
 	err = mipi_dsi_dcs_set_display_off(sharp->link1);
 	if (err < 0)
 		dev_err(panel->dev, "failed to set display off: %d\n", err);
@@ -180,15 +182,13 @@ static int sharp_panel_prepare(struct drm_panel *panel)
 	if (err < 0)
 		return err;
 
-	usleep_range(10000, 20000);
-
-	err = mipi_dsi_dcs_soft_reset(sharp->link1);
-	if (err < 0) {
-		dev_err(panel->dev, "soft reset failed: %d\n", err);
-		goto poweroff;
-	}
-
-	msleep(120);
+	/*
+	 * According to the datasheet, the panel needs around 10 ms to fully
+	 * power up. At least another 120 ms is required before exiting sleep
+	 * mode to make sure the panel is ready. Throw in another 20 ms for
+	 * good measure.
+	 */
+	msleep(150);
 
 	err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1);
 	if (err < 0) {