From: Aaro Koskinen Date: Sun, 22 Mar 2015 15:38:02 +0000 (+0200) Subject: stating: octeon-usb: cvmx_usb_initialize(): eliminate extra indentation X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=edc16d8d481e4c73f9d70d648463d4b25d2c662b;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git stating: octeon-usb: cvmx_usb_initialize(): eliminate extra indentation Eliminate extra indentation by putting all the code into the same block. Also delete a bogus comment. Signed-off-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c index d71ae297c36f..feaaafc30976 100644 --- a/drivers/staging/octeon-usb/octeon-hcd.c +++ b/drivers/staging/octeon-usb/octeon-hcd.c @@ -705,9 +705,15 @@ static int cvmx_usb_shutdown(struct cvmx_usb_state *usb) static int cvmx_usb_initialize(struct device *dev, struct cvmx_usb_state *usb) { + int channel; + int divisor; int retries = 0; + union cvmx_usbcx_hcfg usbcx_hcfg; union cvmx_usbnx_clk_ctl usbn_clk_ctl; union cvmx_usbcx_gintsts usbc_gintsts; + union cvmx_usbcx_gahbcfg usbcx_gahbcfg; + union cvmx_usbcx_gintmsk usbcx_gintmsk; + union cvmx_usbcx_gusbcfg usbcx_gusbcfg; union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status; retry: @@ -775,15 +781,14 @@ retry: * setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down * such that USB is as close as possible to 125Mhz */ - { - int divisor = DIV_ROUND_UP(octeon_get_clock_rate(), 125000000); - /* Lower than 4 doesn't seem to work properly */ - if (divisor < 4) - divisor = 4; - usbn_clk_ctl.s.divide = divisor; - usbn_clk_ctl.s.divide2 = 0; - } + divisor = DIV_ROUND_UP(octeon_get_clock_rate(), 125000000); + /* Lower than 4 doesn't seem to work properly */ + if (divisor < 4) + divisor = 4; + usbn_clk_ctl.s.divide = divisor; + usbn_clk_ctl.s.divide2 = 0; cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); + /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */ usbn_clk_ctl.s.hclk_rst = 1; cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); @@ -862,18 +867,16 @@ retry: * USBC_GAHBCFG[PTXFEMPLVL] * Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */ - { - union cvmx_usbcx_gahbcfg usbcx_gahbcfg; - usbcx_gahbcfg.u32 = 0; - usbcx_gahbcfg.s.dmaen = !(usb->init_flags & - CVMX_USB_INITIALIZE_FLAGS_NO_DMA); - usbcx_gahbcfg.s.hbstlen = 0; - usbcx_gahbcfg.s.nptxfemplvl = 1; - usbcx_gahbcfg.s.ptxfemplvl = 1; - usbcx_gahbcfg.s.glblintrmsk = 1; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), - usbcx_gahbcfg.u32); - } + usbcx_gahbcfg.u32 = 0; + usbcx_gahbcfg.s.dmaen = !(usb->init_flags & + CVMX_USB_INITIALIZE_FLAGS_NO_DMA); + usbcx_gahbcfg.s.hbstlen = 0; + usbcx_gahbcfg.s.nptxfemplvl = 1; + usbcx_gahbcfg.s.ptxfemplvl = 1; + usbcx_gahbcfg.s.glblintrmsk = 1; + cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), + usbcx_gahbcfg.u32); + /* * 3. Program the following fields in USBC_GUSBCFG register. * HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 @@ -881,79 +884,60 @@ retry: * USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 * PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */ - { - union cvmx_usbcx_gusbcfg usbcx_gusbcfg; - - usbcx_gusbcfg.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GUSBCFG(usb->index)); - usbcx_gusbcfg.s.toutcal = 0; - usbcx_gusbcfg.s.ddrsel = 0; - usbcx_gusbcfg.s.usbtrdtim = 0x5; - usbcx_gusbcfg.s.phylpwrclksel = 0; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), - usbcx_gusbcfg.u32); - } + usbcx_gusbcfg.u32 = cvmx_usb_read_csr32(usb, + CVMX_USBCX_GUSBCFG(usb->index)); + usbcx_gusbcfg.s.toutcal = 0; + usbcx_gusbcfg.s.ddrsel = 0; + usbcx_gusbcfg.s.usbtrdtim = 0x5; + usbcx_gusbcfg.s.phylpwrclksel = 0; + cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), + usbcx_gusbcfg.u32); + /* * 4. The software must unmask the following bits in the USBC_GINTMSK * register. * OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 * Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */ - { - union cvmx_usbcx_gintmsk usbcx_gintmsk; - int channel; - - usbcx_gintmsk.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GINTMSK(usb->index)); - usbcx_gintmsk.s.otgintmsk = 1; - usbcx_gintmsk.s.modemismsk = 1; - usbcx_gintmsk.s.hchintmsk = 1; - usbcx_gintmsk.s.sofmsk = 0; - /* We need RX FIFO interrupts if we don't have DMA */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - usbcx_gintmsk.s.rxflvlmsk = 1; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index), - usbcx_gintmsk.u32); + usbcx_gintmsk.u32 = cvmx_usb_read_csr32(usb, + CVMX_USBCX_GINTMSK(usb->index)); + usbcx_gintmsk.s.otgintmsk = 1; + usbcx_gintmsk.s.modemismsk = 1; + usbcx_gintmsk.s.hchintmsk = 1; + usbcx_gintmsk.s.sofmsk = 0; + /* We need RX FIFO interrupts if we don't have DMA */ + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) + usbcx_gintmsk.s.rxflvlmsk = 1; + cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index), + usbcx_gintmsk.u32); - /* - * Disable all channel interrupts. We'll enable them per channel - * later. - */ - for (channel = 0; channel < 8; channel++) - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); - } + /* + * Disable all channel interrupts. We'll enable them per channel later. + */ + for (channel = 0; channel < 8; channel++) + cvmx_usb_write_csr32(usb, + CVMX_USBCX_HCINTMSKX(channel, usb->index), + 0); - { - /* - * Host Port Initialization - * - * 1. Program the host-port interrupt-mask field to unmask, - * USBC_GINTMSK[PRTINT] = 1 - */ - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - union cvmx_usbcx_gintmsk, prtintmsk, 1); - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - union cvmx_usbcx_gintmsk, disconnintmsk, 1); - /* - * 2. Program the USBC_HCFG register to select full-speed host - * or high-speed host. - */ - { - union cvmx_usbcx_hcfg usbcx_hcfg; - - usbcx_hcfg.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCFG(usb->index)); - usbcx_hcfg.s.fslssupp = 0; - usbcx_hcfg.s.fslspclksel = 0; - cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), - usbcx_hcfg.u32); - } + /* + * Host Port Initialization + * + * 1. Program the host-port interrupt-mask field to unmask, + * USBC_GINTMSK[PRTINT] = 1 + */ + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), + union cvmx_usbcx_gintmsk, prtintmsk, 1); + USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), + union cvmx_usbcx_gintmsk, disconnintmsk, 1); - /* - * Steps 4-15 from the manual are done later in the port enable - */ - } + /* + * 2. Program the USBC_HCFG register to select full-speed host + * or high-speed host. + */ + usbcx_hcfg.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index)); + usbcx_hcfg.s.fslssupp = 0; + usbcx_hcfg.s.fslspclksel = 0; + cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32); cvmx_fifo_setup(usb);