From: Eric Engestrom Date: Mon, 25 Apr 2016 06:36:56 +0000 (+0100) Subject: Documentation: networking: fix spelling mistakes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=edb9a1b8942b32762b1179039debf2172ad9cc32;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git Documentation: networking: fix spelling mistakes Signed-off-by: Eric Engestrom Signed-off-by: David S. Miller --- diff --git a/Documentation/networking/altera_tse.txt b/Documentation/networking/altera_tse.txt index 3f24df8c6e65..50b8589d12fd 100644 --- a/Documentation/networking/altera_tse.txt +++ b/Documentation/networking/altera_tse.txt @@ -6,7 +6,7 @@ This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers using the SGDMA and MSGDMA soft DMA IP components. The driver uses the platform bus to obtain component resources. The designs used to test this driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board, -and tested with ARM and NIOS processor hosts seperately. The anticipated use +and tested with ARM and NIOS processor hosts separately. The anticipated use cases are simple communications between an embedded system and an external peer for status and simple configuration of the embedded system. @@ -65,14 +65,14 @@ Driver parameters can be also passed in command line by using: 4.1) Transmit process When the driver's transmit routine is called by the kernel, it sets up a transmit descriptor by calling the underlying DMA transmit routine (SGDMA or -MSGDMA), and initites a transmit operation. Once the transmit is complete, an +MSGDMA), and initiates a transmit operation. Once the transmit is complete, an interrupt is driven by the transmit DMA logic. The driver handles the transmit completion in the context of the interrupt handling chain by recycling resource required to send and track the requested transmit operation. 4.2) Receive process The driver will post receive buffers to the receive DMA logic during driver -intialization. Receive buffers may or may not be queued depending upon the +initialization. Receive buffers may or may not be queued depending upon the underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able to queue receive buffers to the SGDMA receive logic). When a packet is received, the DMA logic generates an interrupt. The driver handles a receive diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt index cf996394e466..14422f8fcdc4 100644 --- a/Documentation/networking/ipvlan.txt +++ b/Documentation/networking/ipvlan.txt @@ -8,7 +8,7 @@ Initial Release: This is conceptually very similar to the macvlan driver with one major exception of using L3 for mux-ing /demux-ing among slaves. This property makes the master device share the L2 with it's slave devices. I have developed this -driver in conjuntion with network namespaces and not sure if there is use case +driver in conjunction with network namespaces and not sure if there is use case outside of it. @@ -42,7 +42,7 @@ out. In this mode the slaves will RX/TX multicast and broadcast (if applicable) as well. 4.2 L3 mode: - In this mode TX processing upto L3 happens on the stack instance attached + In this mode TX processing up to L3 happens on the stack instance attached to the slave device and packets are switched to the stack instance of the master device for the L2 processing and routing from that instance will be used before packets are queued on the outbound device. In this mode the slaves @@ -56,7 +56,7 @@ situations defines your use case then you can choose to use ipvlan - (a) The Linux host that is connected to the external switch / router has policy configured that allows only one mac per port. (b) No of virtual devices created on a master exceed the mac capacity and -puts the NIC in promiscous mode and degraded performance is a concern. +puts the NIC in promiscuous mode and degraded performance is a concern. (c) If the slave device is to be put into the hostile / untrusted network namespace where L2 on the slave could be changed / misused. diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index f4be85e96005..2c4e3354e128 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -67,12 +67,12 @@ The two basic thread commands are: * add_device DEVICE@NAME -- adds a single device * rem_device_all -- remove all associated devices -When adding a device to a thread, a corrosponding procfile is created +When adding a device to a thread, a corresponding procfile is created which is used for configuring this device. Thus, device names need to be unique. To support adding the same device to multiple threads, which is useful -with multi queue NICs, a the device naming scheme is extended with "@": +with multi queue NICs, the device naming scheme is extended with "@": device@something The part after "@" can be anything, but it is custom to use the thread @@ -221,7 +221,7 @@ Sample scripts A collection of tutorial scripts and helpers for pktgen is in the samples/pktgen directory. The helper parameters.sh file support easy -and consistant parameter parsing across the sample scripts. +and consistent parameter parsing across the sample scripts. Usage example and help: ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2 diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index d52aa10cfe91..5da679c573d2 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -41,7 +41,7 @@ using an rx_handler which gives the impression that packets flow through the VRF device. Similarly on egress routing rules are used to send packets to the VRF device driver before getting sent out the actual interface. This allows tcpdump on a VRF device to capture all packets into and out of the -VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied +VRF as a whole.[1] Similarly, netfilter [2] and tc rules can be applied using the VRF device to specify rules that apply to the VRF domain as a whole. [1] Packets in the forwarded state do not flow through the device, so those diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt index d7aac9dedeb4..8d88e0f2ec49 100644 --- a/Documentation/networking/xfrm_sync.txt +++ b/Documentation/networking/xfrm_sync.txt @@ -4,7 +4,7 @@ Krisztian and others and additional patches from Jamal . The end goal for syncing is to be able to insert attributes + generate -events so that the an SA can be safely moved from one machine to another +events so that the SA can be safely moved from one machine to another for HA purposes. The idea is to synchronize the SA so that the takeover machine can do the processing of the SA as accurate as possible if it has access to it. @@ -13,7 +13,7 @@ We already have the ability to generate SA add/del/upd events. These patches add ability to sync and have accurate lifetime byte (to ensure proper decay of SAs) and replay counters to avoid replay attacks with as minimal loss at failover time. -This way a backup stays as closely uptodate as an active member. +This way a backup stays as closely up-to-date as an active member. Because the above items change for every packet the SA receives, it is possible for a lot of the events to be generated. @@ -163,7 +163,7 @@ If you have an SA that is getting hit by traffic in bursts such that there is a period where the timer threshold expires with no packets seen, then an odd behavior is seen as follows: The first packet arrival after a timer expiry will trigger a timeout -aevent; i.e we dont wait for a timeout period or a packet threshold +event; i.e we don't wait for a timeout period or a packet threshold to be reached. This is done for simplicity and efficiency reasons. -JHS