From: Daniel Vetter Date: Thu, 6 Dec 2012 13:24:21 +0000 (+0100) Subject: drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ed7ef43989b3a8235b1cbf1e2b025aa4af3368a6;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set Especially getting rid of all things lvds is ... great! v2: Drop the two additional pre-hsw hunks noticed by Paulo Zanoni. v3: - handle DP ports correctly (spoted by Paulo) - don't leave {} behind for a single-line block (again spotted by Paulo) - kill another if (IBX || CPT) block Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 093a163d4b1c..5865cd9ddc3a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5461,20 +5461,13 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int num_connectors = 0; - intel_clock_t clock, reduced_clock; - u32 dpll = 0, fp = 0, fp2 = 0; - bool ok, has_reduced_clock = false; - bool is_lvds = false, is_dp = false, is_cpu_edp = false; + bool is_dp = false, is_cpu_edp = false; struct intel_encoder *encoder; - u32 temp; int ret; bool dither; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; @@ -5508,143 +5501,26 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock)) return -EINVAL; - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { - ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, - &has_reduced_clock, - &reduced_clock); - if (!ok) { - DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return -EINVAL; - } - } - /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); /* determine panel color depth */ dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, adjusted_mode); - if (is_lvds && dev_priv->lvds_dither) - dither = true; DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { - fp = clock.n << 16 | clock.m1 << 8 | clock.m2; - if (has_reduced_clock) - fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | - reduced_clock.m2; - - dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, - fp); - - /* CPU eDP is the only output that doesn't need a PCH PLL of its - * own on pre-Haswell/LPT generation */ - if (!is_cpu_edp) { - struct intel_pch_pll *pll; - - pll = intel_get_pch_pll(intel_crtc, dpll, fp); - if (pll == NULL) { - DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", - pipe); - return -EINVAL; - } - } else - intel_put_pch_pll(intel_crtc); - - /* The LVDS pin pair needs to be on before the DPLLs are - * enabled. This is an exception to the general rule that - * mode_set doesn't turn things on. - */ - if (is_lvds) { - temp = I915_READ(PCH_LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) { - temp &= ~PORT_TRANS_SEL_MASK; - temp |= PORT_TRANS_SEL_CPT(pipe); - } else { - if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; - else - temp &= ~LVDS_PIPEB_SELECT; - } - - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether - * we're going to set the DPLLs for dual-channel mode or - * not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | - LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode - * (LVDS_A3_POWER_UP) appropriately here, but we need to - * look more thoroughly into how panels behave in the - * two modes. - */ - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - temp |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - temp |= LVDS_VSYNC_POLARITY; - I915_WRITE(PCH_LVDS, temp); - } - } - - if (is_dp && !is_cpu_edp) { + if (is_dp && !is_cpu_edp) intel_dp_set_m_n(crtc, mode, adjusted_mode); - } else { - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { - /* For non-DP output, clear any trans DP clock recovery - * setting.*/ - I915_WRITE(TRANSDATA_M1(pipe), 0); - I915_WRITE(TRANSDATA_N1(pipe), 0); - I915_WRITE(TRANSDPLINK_M1(pipe), 0); - I915_WRITE(TRANSDPLINK_N1(pipe), 0); - } - } intel_crtc->lowfreq_avail = false; - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { - if (intel_crtc->pch_pll) { - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(intel_crtc->pch_pll->pll_reg); - udelay(150); - - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); - } - - if (intel_crtc->pch_pll) { - if (is_lvds && has_reduced_clock && i915_powersave) { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); - intel_crtc->lowfreq_avail = true; - } else { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); - } - } - } intel_set_pipe_timings(intel_crtc, mode, adjusted_mode); if (!is_dp || is_cpu_edp) ironlake_set_m_n(crtc, mode, adjusted_mode); - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) - if (is_cpu_edp) - ironlake_set_pll_edp(crtc, adjusted_mode->clock); - haswell_set_pipeconf(crtc, adjusted_mode, dither); /* Set up the display plane register */