From: Shinya Kuribayashi Date: Fri, 6 Nov 2009 12:43:52 +0000 (+0900) Subject: i2c-designware: Consolidate to use 32-bit word accesses X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ed5e1dd5f2daa8a59bc8116888417a6ff96d2ae9;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git i2c-designware: Consolidate to use 32-bit word accesses This driver looks originally meant for armel machines where readw()/ writew() works perfectly fine with this hardware. But that doens't work for big-endian systems. This patch converts all 8/16-bit-aware usages to 32-bit variants. Signed-off-by: Shinya Kuribayashi Acked-by: Baruch Siach Signed-off-by: Ben Dooks --- diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c index b444762e9b9..a4f928e1fc5 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware.c @@ -162,14 +162,14 @@ struct dw_i2c_dev { struct i2c_msg *msgs; int msgs_num; int msg_write_idx; - u16 tx_buf_len; + u32 tx_buf_len; u8 *tx_buf; int msg_read_idx; - u16 rx_buf_len; + u32 rx_buf_len; u8 *rx_buf; int msg_err; unsigned int status; - u16 abort_source; + u32 abort_source; int irq; struct i2c_adapter adapter; unsigned int tx_fifo_depth; @@ -187,25 +187,25 @@ struct dw_i2c_dev { static void i2c_dw_init(struct dw_i2c_dev *dev) { u32 input_clock_khz = clk_get_rate(dev->clk) / 1000; - u16 ic_con; + u32 ic_con; /* Disable the adapter */ - writeb(0, dev->base + DW_IC_ENABLE); + writel(0, dev->base + DW_IC_ENABLE); /* set standard and fast speed deviders for high/low periods */ - writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */ + writel((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */ dev->base + DW_IC_SS_SCL_HCNT); - writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */ + writel((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */ dev->base + DW_IC_SS_SCL_LCNT); - writew((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */ + writel((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */ dev->base + DW_IC_FS_SCL_HCNT); - writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */ + writel((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */ dev->base + DW_IC_FS_SCL_LCNT); /* configure the i2c master */ ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; - writew(ic_con, dev->base + DW_IC_CON); + writel(ic_con, dev->base + DW_IC_CON); } /* @@ -215,7 +215,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) { int timeout = TIMEOUT; - while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { + while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { if (timeout <= 0) { dev_warn(dev->dev, "timeout waiting for bus ready\n"); return -ETIMEDOUT; @@ -239,29 +239,29 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap) struct dw_i2c_dev *dev = i2c_get_adapdata(adap); struct i2c_msg *msgs = dev->msgs; int num = dev->msgs_num; - u16 ic_con, intr_mask; - int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR); - int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR); - u16 addr = msgs[dev->msg_write_idx].addr; - u16 buf_len = dev->tx_buf_len; + u32 ic_con, intr_mask; + int tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR); + int rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR); + u32 addr = msgs[dev->msg_write_idx].addr; + u32 buf_len = dev->tx_buf_len; if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) { /* Disable the adapter */ - writeb(0, dev->base + DW_IC_ENABLE); + writel(0, dev->base + DW_IC_ENABLE); /* set the slave (target) address */ - writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR); + writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR); /* if the slave address is ten bit address, enable 10BITADDR */ - ic_con = readw(dev->base + DW_IC_CON); + ic_con = readl(dev->base + DW_IC_CON); if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) ic_con |= DW_IC_CON_10BITADDR_MASTER; else ic_con &= ~DW_IC_CON_10BITADDR_MASTER; - writew(ic_con, dev->base + DW_IC_CON); + writel(ic_con, dev->base + DW_IC_CON); /* Enable the adapter */ - writeb(1, dev->base + DW_IC_ENABLE); + writel(1, dev->base + DW_IC_ENABLE); } for (; dev->msg_write_idx < num; dev->msg_write_idx++) { @@ -287,10 +287,10 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap) while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { - writew(0x100, dev->base + DW_IC_DATA_CMD); + writel(0x100, dev->base + DW_IC_DATA_CMD); rx_limit--; } else - writew(*(dev->tx_buf++), + writel(*(dev->tx_buf++), dev->base + DW_IC_DATA_CMD); tx_limit--; buf_len--; } @@ -302,7 +302,7 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap) dev->status |= STATUS_WRITE_IN_PROGRESS; } else dev->status &= ~STATUS_WRITE_IN_PROGRESS; - writew(intr_mask, dev->base + DW_IC_INTR_MASK); + writel(intr_mask, dev->base + DW_IC_INTR_MASK); dev->tx_buf_len = buf_len; } @@ -313,11 +313,11 @@ i2c_dw_read(struct i2c_adapter *adap) struct dw_i2c_dev *dev = i2c_get_adapdata(adap); struct i2c_msg *msgs = dev->msgs; int num = dev->msgs_num; - u16 addr = msgs[dev->msg_read_idx].addr; - int rx_valid = readw(dev->base + DW_IC_RXFLR); + u32 addr = msgs[dev->msg_read_idx].addr; + int rx_valid = readl(dev->base + DW_IC_RXFLR); for (; dev->msg_read_idx < num; dev->msg_read_idx++) { - u16 len; + u32 len; u8 *buf; if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD)) @@ -336,7 +336,7 @@ i2c_dw_read(struct i2c_adapter *adap) } for (; len > 0 && rx_valid > 0; len--, rx_valid--) - *buf++ = readb(dev->base + DW_IC_DATA_CMD); + *buf++ = readl(dev->base + DW_IC_DATA_CMD); if (len > 0) { dev->status |= STATUS_READ_IN_PROGRESS; @@ -398,7 +398,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) do { i2c_dw_read(adap); } while (dev->status & STATUS_READ_IN_PROGRESS); - writeb(0, dev->base + DW_IC_ENABLE); + writel(0, dev->base + DW_IC_ENABLE); ret = num; goto done; } @@ -428,7 +428,7 @@ static u32 i2c_dw_func(struct i2c_adapter *adap) static void dw_i2c_pump_msg(unsigned long data) { struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data; - u16 intr_mask; + u32 intr_mask; i2c_dw_read(&dev->adapter); i2c_dw_xfer_msg(&dev->adapter); @@ -436,7 +436,7 @@ static void dw_i2c_pump_msg(unsigned long data) intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT; if (dev->status & STATUS_WRITE_IN_PROGRESS) intr_mask |= DW_IC_INTR_TX_EMPTY; - writew(intr_mask, dev->base + DW_IC_INTR_MASK); + writel(intr_mask, dev->base + DW_IC_INTR_MASK); } /* @@ -446,19 +446,19 @@ static void dw_i2c_pump_msg(unsigned long data) static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) { struct dw_i2c_dev *dev = dev_id; - u16 stat; + u32 stat; - stat = readw(dev->base + DW_IC_INTR_STAT); + stat = readl(dev->base + DW_IC_INTR_STAT); dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); if (stat & DW_IC_INTR_TX_ABRT) { - dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE); + dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE); dev->cmd_err |= DW_IC_ERR_TX_ABRT; dev->status = STATUS_IDLE; } else if (stat & DW_IC_INTR_TX_EMPTY) tasklet_schedule(&dev->pump_msg); - readb(dev->base + DW_IC_CLR_INTR); /* clear interrupts */ - writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */ + readl(dev->base + DW_IC_CLR_INTR); /* clear interrupts */ + writel(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */ if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) complete(&dev->cmd_complete); @@ -531,7 +531,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) } i2c_dw_init(dev); - writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */ + writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */ r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev); if (r) { dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); @@ -587,7 +587,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) clk_put(dev->clk); dev->clk = NULL; - writeb(0, dev->base + DW_IC_ENABLE); + writel(0, dev->base + DW_IC_ENABLE); free_irq(dev->irq, dev); kfree(dev);