From: Rob Herring Date: Fri, 2 Oct 2015 03:24:09 +0000 (-0500) Subject: dt-bindings: consolidate interrupt controller bindings X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=eb3fcf007fff;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git dt-bindings: consolidate interrupt controller bindings Move various interrupt controller bindings into the interrupt-controller/ directory. Signed-off-by: Rob Herring Cc: Matthias Brugger Cc: linux-mediatek@lists.infradead.org --- diff --git a/Documentation/devicetree/bindings/arc/archs-idu-intc.txt b/Documentation/devicetree/bindings/arc/archs-idu-intc.txt deleted file mode 100644 index 0dcb7c7d3e40..000000000000 --- a/Documentation/devicetree/bindings/arc/archs-idu-intc.txt +++ /dev/null @@ -1,46 +0,0 @@ -* ARC-HS Interrupt Distribution Unit - - This optional 2nd level interrupt controller can be used in SMP configurations for - dynamic IRQ routing, load balancing of common/external IRQs towards core intc. - -Properties: - -- compatible: "snps,archs-idu-intc" -- interrupt-controller: This is an interrupt controller. -- interrupt-parent: -- #interrupt-cells: Must be <2>. -- interrupts: <...> specifies the upstream core irqs - - First cell specifies the "common" IRQ from peripheral to IDU - Second cell specifies the irq distribution mode to cores - 0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 - - intc accessed via the special ARC AUX register interface, hence "reg" property - is not specified. - -Example: - core_intc: core-interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - - idu_intc: idu-interrupt-controller { - compatible = "snps,archs-idu-intc"; - interrupt-controller; - interrupt-parent = <&core_intc>; - - /* - * - * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 - */ - #interrupt-cells = <2>; - - /* upstream core irqs: downstream these are "COMMON" irq 0,1.. */ - interrupts = <24 25 26 27 28 29 30 31>; - }; - - some_device: serial@c0fc1000 { - interrupt-parent = <&idu_intc>; - interrupts = <0 0>; /* upstream idu IRQ #24, Round Robin */ - }; diff --git a/Documentation/devicetree/bindings/arc/archs-intc.txt b/Documentation/devicetree/bindings/arc/archs-intc.txt deleted file mode 100644 index 69f326d6a5ad..000000000000 --- a/Documentation/devicetree/bindings/arc/archs-intc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA) - -Properties: - -- compatible: "snps,archs-intc" -- interrupt-controller: This is an interrupt controller. -- #interrupt-cells: Must be <1>. - - Single Cell "interrupts" property of a device specifies the IRQ number - between 16 to 256 - - intc accessed via the special ARC AUX register interface, hence "reg" property - is not specified. - -Example: - - intc: interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - interrupts = <16 17 18 19 20 21 22 23 24 25>; - }; diff --git a/Documentation/devicetree/bindings/arc/interrupts.txt b/Documentation/devicetree/bindings/arc/interrupts.txt deleted file mode 100644 index 9a5d562435ea..000000000000 --- a/Documentation/devicetree/bindings/arc/interrupts.txt +++ /dev/null @@ -1,24 +0,0 @@ -* ARC700 incore Interrupt Controller - - The core interrupt controller provides 32 prioritised interrupts (2 levels) - to ARC700 core. - -Properties: - -- compatible: "snps,arc700-intc" -- interrupt-controller: This is an interrupt controller. -- #interrupt-cells: Must be <1>. - - Single Cell "interrupts" property of a device specifies the IRQ number - between 0 to 31 - - intc accessed via the special ARC AUX register interface, hence "reg" property - is not specified. - -Example: - - intc: interrupt-controller { - compatible = "snps,arc700-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt b/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt deleted file mode 100644 index 597e8a089fe4..000000000000 --- a/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt +++ /dev/null @@ -1,27 +0,0 @@ -* TI Common Platform Interrupt Controller - -Common Platform Interrupt Controller (cp_intc) is used on -OMAP-L1x SoCs and can support several configurable number -of interrupts. - -Main node required properties: - -- compatible : should be: - "ti,cp-intc" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 1. - - The cell contains the interrupt number in the range [0-128]. -- ti,intc-size: Number of interrupts handled by the interrupt controller. -- reg: physical base address and size of the intc registers map. - -Example: - - intc: interrupt-controller@1 { - compatible = "ti,cp-intc"; - interrupt-controller; - #interrupt-cells = <1>; - ti,intc-size = <101>; - reg = <0xfffee000 0x2000>; - }; diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt deleted file mode 100644 index 7803e77d85cb..000000000000 --- a/Documentation/devicetree/bindings/arm/gic-v3.txt +++ /dev/null @@ -1,123 +0,0 @@ -* ARM Generic Interrupt Controller, version 3 - -AArch64 SMP cores are often associated with a GICv3, providing Private -Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), -Software Generated Interrupts (SGI), and Locality-specific Peripheral -Interrupts (LPI). - -Main node required properties: - -- compatible : should at least contain "arm,gic-v3". -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. Must be a single cell with a value of at least 3. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. Other values are reserved for future use. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = edge triggered - 4 = level triggered - - Cells 4 and beyond are reserved for future use. When the 1st cell - has a value of 0 or 1, cells 4 and beyond act as padding, and may be - ignored. It is recommended that padding cells have a value of 0. - -- reg : Specifies base physical address(s) and size of the GIC - registers, in the following order: - - GIC Distributor interface (GICD) - - GIC Redistributors (GICR), one range per redistributor region - - GIC CPU interface (GICC) - - GIC Hypervisor interface (GICH) - - GIC Virtual CPU interface (GICV) - - GICC, GICH and GICV are optional. - -- interrupts : Interrupt source of the VGIC maintenance interrupt. - -Optional - -- redistributor-stride : If using padding pages, specifies the stride - of consecutive redistributors. Must be a multiple of 64kB. - -- #redistributor-regions: The number of independent contiguous regions - occupied by the redistributors. Required if more than one such - region is present. - -Sub-nodes: - -GICv3 has one or more Interrupt Translation Services (ITS) that are -used to route Message Signalled Interrupts (MSI) to the CPUs. - -These nodes must have the following properties: -- compatible : Should at least contain "arm,gic-v3-its". -- msi-controller : Boolean property. Identifies the node as an MSI controller -- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device - which will generate the MSI. -- reg: Specifies the base physical address and size of the ITS - registers. - -The main GIC node must contain the appropriate #address-cells, -#size-cells and ranges properties for the reg property of all ITS -nodes. - -Examples: - - gic: interrupt-controller@2cf00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - reg = <0x0 0x2f000000 0 0x10000>, // GICD - <0x0 0x2f100000 0 0x200000>, // GICR - <0x0 0x2c000000 0 0x2000>, // GICC - <0x0 0x2c010000 0 0x2000>, // GICH - <0x0 0x2c020000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; - }; - }; - - gic: interrupt-controller@2c010000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - redistributor-stride = <0x0 0x40000>; // 256kB stride - #redistributor-regions = <2>; - reg = <0x0 0x2c010000 0 0x10000>, // GICD - <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 - <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 - <0x0 0x2c040000 0 0x2000>, // GICC - <0x0 0x2c060000 0 0x2000>, // GICH - <0x0 0x2c080000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; - }; - - gic-its@2c400000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c400000 0 0x200000>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt deleted file mode 100644 index 2da059a4790c..000000000000 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ /dev/null @@ -1,152 +0,0 @@ -* ARM Generic Interrupt Controller - -ARM SMP cores are often associated with a GIC, providing per processor -interrupts (PPI), shared processor interrupts (SPI) and software -generated interrupts (SGI). - -Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. -Secondary GICs are cascaded into the upward interrupt controller and do not -have PPIs or SGIs. - -Main node required properties: - -- compatible : should be one of: - "arm,gic-400" - "arm,cortex-a15-gic" - "arm,cortex-a9-gic" - "arm,cortex-a7-gic" - "arm,arm11mp-gic" - "brcm,brahma-b15-gic" - "arm,arm1176jzf-devchip-gic" - "qcom,msm-8660-qgic" - "qcom,msm-qgic2" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 3. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered (invalid for SPIs) - 4 = active high level-sensitive - 8 = active low level-sensitive (invalid for SPIs). - bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of - the 8 possible cpus attached to the GIC. A bit set to '1' indicated - the interrupt is wired to that CPU. Only valid for PPI interrupts. - Also note that the configurability of PPI interrupts is IMPLEMENTATION - DEFINED and as such not guaranteed to be present (most SoC available - in 2014 seem to ignore the setting of this flag and use the hardware - default value). - -- reg : Specifies base physical address(s) and size of the GIC registers. The - first region is the GIC distributor register base and size. The 2nd region is - the GIC cpu interface register base and size. - -Optional -- interrupts : Interrupt source of the parent interrupt controller on - secondary GICs, or VGIC maintenance interrupt on primary GIC (see - below). - -- cpu-offset : per-cpu offset within the distributor and cpu interface - regions, used when the GIC doesn't have banked registers. The offset is - cpu-offset * cpu-nr. - -Example: - - intc: interrupt-controller@fff11000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xfff11000 0x1000>, - <0xfff10100 0x100>; - }; - - -* GIC virtualization extensions (VGIC) - -For ARM cores that support the virtualization extensions, additional -properties must be described (they only exist if the GIC is the -primary interrupt controller). - -Required properties: - -- reg : Additional regions specifying the base physical address and - size of the VGIC registers. The first additional region is the GIC - virtual interface control register base and size. The 2nd additional - region is the GIC virtual cpu interface register base and size. - -- interrupts : VGIC maintenance interrupt. - -Example: - - interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - -* GICv2m extension for MSI/MSI-x support (Optional) - -Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). -This is enabled by specifying v2m sub-node(s). - -Required properties: - -- compatible : The value here should contain "arm,gic-v2m-frame". - -- msi-controller : Identifies the node as an MSI controller. - -- reg : GICv2m MSI interface register base and size - -Optional properties: - -- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect - value, this property should contain the SPI base of - the MSI frame, overriding the HW value. - -- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect - value, this property should contain the number of - SPIs assigned to the frame, overriding the HW value. - -Example: - - interrupt-controller@e1101000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - interrupt-controller; - interrupts = <1 8 0xf04>; - ranges = <0 0 0 0xe1100000 0 0x100000>; - reg = <0x0 0xe1110000 0 0x01000>, - <0x0 0xe112f000 0 0x02000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@0x8000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x80000 0 0x1000>; - }; - - .... - - v2mN: v2m@0x9000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x90000 0 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt deleted file mode 100644 index 539adca19e8f..000000000000 --- a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt +++ /dev/null @@ -1,38 +0,0 @@ -* NXP LPC32xx Main Interrupt Controller - (MIC, including SIC1 and SIC2 secondary controllers) - -Required properties: -- compatible: Should be "nxp,lpc3220-mic" -- interrupt-controller: Identifies the node as an interrupt controller. -- interrupt-parent: Empty for the interrupt controller itself -- #interrupt-cells: The number of cells to define the interrupts. Should be 2. - The first cell is the IRQ number - The second cell is used to specify mode: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Default for internal sources should be set to 4 (active high). -- reg: Should contain MIC registers location and length - -Examples: - /* - * MIC - */ - mic: interrupt-controller@40008000 { - compatible = "nxp,lpc3220-mic"; - interrupt-controller; - interrupt-parent; - #interrupt-cells = <2>; - reg = <0x40008000 0xC000>; - }; - - /* - * ADC - */ - adc@40048000 { - compatible = "nxp,lpc3220-adc"; - reg = <0x40048000 0x1000>; - interrupt-parent = <&mic>; - interrupts = <39 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt deleted file mode 100644 index afef6a85ac51..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ /dev/null @@ -1,32 +0,0 @@ -+Mediatek 65xx/67xx/81xx sysirq - -Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI -interrupt. - -Required properties: -- compatible: should be one of: - "mediatek,mt8173-sysirq" - "mediatek,mt8135-sysirq" - "mediatek,mt8127-sysirq" - "mediatek,mt6795-sysirq" - "mediatek,mt6592-sysirq" - "mediatek,mt6589-sysirq" - "mediatek,mt6582-sysirq" - "mediatek,mt6580-sysirq" - "mediatek,mt6577-sysirq" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Use the same format as specified by GIC in - Documentation/devicetree/bindings/arm/gic.txt -- interrupt-parent: phandle of irq parent for sysirq. The parent must - use the same interrupt-cells format as GIC. -- reg: Physical base address of the intpol registers and length of memory - mapped region. - -Example: - sysirq: interrupt-controller@10200100 { - compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10200100 0 0x1c>; - }; diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt deleted file mode 100644 index 8b53273cb22f..000000000000 --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Marvell MMP Interrupt controller - -Required properties: -- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or - "mrvl,mmp2-mux-intc" -- reg : Address and length of the register set of the interrupt controller. - If the interrupt controller is intc, address and length means the range - of the whold interrupt controller. If the interrupt controller is mux-intc, - address and length means one register. Since address of mux-intc is in the - range of intc. mux-intc is secondary interrupt controller. -- reg-names : Name of the register set of the interrupt controller. It's - only required in mux-intc interrupt controller. -- interrupts : Should be the port interrupt shared by mux interrupts. It's - only required in mux-intc interrupt controller. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt - controller. -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge - detection first. - -Example: - intc: interrupt-controller@d4282000 { - compatible = "mrvl,mmp2-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd4282000 0x1000>; - mrvl,intc-nr-irqs = <64>; - }; - - intcmux4@d4282150 { - compatible = "mrvl,mmp2-mux-intc"; - interrupts = <4>; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x150 0x4>, <0x168 0x4>; - reg-names = "mux status", "mux mask"; - mrvl,intc-nr-irqs = <2>; - }; - -* Marvell Orion Interrupt controller - -Required properties -- compatible : Should be "marvell,orion-intc". -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. Supported value is <1>. -- interrupt-controller : Declare this node to be an interrupt controller. -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. - One entry in the list represents 32 interrupts. - -Example: - - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xfed20204 0x04>, - <0xfed20214 0x04>; - }; diff --git a/Documentation/devicetree/bindings/arm/omap/intc.txt b/Documentation/devicetree/bindings/arm/omap/intc.txt deleted file mode 100644 index f2583e6ec060..000000000000 --- a/Documentation/devicetree/bindings/arm/omap/intc.txt +++ /dev/null @@ -1,27 +0,0 @@ -* OMAP Interrupt Controller - -OMAP2/3 are using a TI interrupt controller that can support several -configurable number of interrupts. - -Main node required properties: - -- compatible : should be: - "ti,omap2-intc" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 1. - - The cell contains the interrupt number in the range [0-128]. -- ti,intc-size: Number of interrupts handled by the interrupt controller. -- reg: physical base address and size of the intc registers map. - -Example: - - intc: interrupt-controller@1 { - compatible = "ti,omap2-intc"; - interrupt-controller; - #interrupt-cells = <1>; - ti,intc-size = <96>; - reg = <0x48200000 0x1000>; - }; - diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt deleted file mode 100644 index 9e5f73412cd7..000000000000 --- a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Samsung Exynos Interrupt Combiner Controller - -Samsung's Exynos4 architecture includes a interrupt combiner controller which -can combine interrupt sources as a group and provide a single interrupt request -for the group. The interrupt request from each group are connected to a parent -interrupt controller, such as GIC in case of Exynos4210. - -The interrupt combiner controller consists of multiple combiners. Up to eight -interrupt sources can be connected to a combiner. The combiner outputs one -combined interrupt for its eight interrupt sources. The combined interrupt -is usually connected to a parent interrupt controller. - -A single node in the device tree is used to describe the interrupt combiner -controller module (which includes multiple combiners). A combiner in the -interrupt controller module shares config/control registers with other -combiners. For example, a 32-bit interrupt enable/disable config register -can accommodate up to 4 interrupt combiners (with each combiner supporting -up to 8 interrupt sources). - -Required properties: -- compatible: should be "samsung,exynos4210-combiner". -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: should be <2>. The meaning of the cells are - * First Cell: Combiner Group Number. - * Second Cell: Interrupt number within the group. -- reg: Base address and size of interrupt combiner registers. -- interrupts: The list of interrupts generated by the combiners which are then - connected to a parent interrupt controller. The format of the interrupt - specifier depends in the interrupt parent controller. - -Optional properties: -- samsung,combiner-nr: The number of interrupt combiners supported. If this - property is not specified, the default number of combiners is assumed - to be 16. -- interrupt-parent: pHandle of the parent interrupt controller, if not - inherited from the parent node. - - -Example: - - The following is a an example from the Exynos4210 SoC dtsi file. - - combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; - }; diff --git a/Documentation/devicetree/bindings/arm/spear/shirq.txt b/Documentation/devicetree/bindings/arm/spear/shirq.txt deleted file mode 100644 index 715a013ed4bd..000000000000 --- a/Documentation/devicetree/bindings/arm/spear/shirq.txt +++ /dev/null @@ -1,48 +0,0 @@ -* SPEAr Shared IRQ layer (shirq) - -SPEAr3xx architecture includes shared/multiplexed irqs for certain set -of devices. The multiplexor provides a single interrupt to parent -interrupt controller (VIC) on behalf of a group of devices. - -There can be multiple groups available on SPEAr3xx variants but not -exceeding 4. The number of devices in a group can differ, further they -may share same set of status/mask registers spanning across different -bit masks. Also in some cases the group may not have enable or other -registers. This makes software little complex. - -A single node in the device tree is used to describe the shared -interrupt multiplexor (one node for all groups). A group in the -interrupt controller shares config/control registers with other groups. -For example, a 32-bit interrupt enable/disable config register can -accommodate up to 4 interrupt groups. - -Required properties: - - compatible: should be, either of - - "st,spear300-shirq" - - "st,spear310-shirq" - - "st,spear320-shirq" - - interrupt-controller: Identifies the node as an interrupt controller. - - #interrupt-cells: should be <1> which basically contains the offset - (starting from 0) of interrupts for all the groups. - - reg: Base address and size of shirq registers. - - interrupts: The list of interrupts generated by the groups which are - then connected to a parent interrupt controller. Each group is - associated with one of the interrupts, hence number of interrupts (to - parent) is equal to number of groups. The format of the interrupt - specifier depends in the interrupt parent controller. - - Optional properties: - - interrupt-parent: pHandle of the parent interrupt controller, if not - inherited from the parent node. - -Example: - -The following is an example from the SPEAr320 SoC dtsi file. - -shirq: interrupt-controller@0xb3000000 { - compatible = "st,spear320-shirq"; - reg = <0xb3000000 0x1000>; - interrupts = <28 29 30 1>; - #interrupt-cells = <1>; - interrupt-controller; -}; diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt deleted file mode 100644 index c9cf605bb995..000000000000 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ /dev/null @@ -1,36 +0,0 @@ -* ARM Versatile FPGA interrupt controller - -One or more FPGA IRQ controllers can be synthesized in an ARM reference board -such as the Integrator or Versatile family. The output of these different -controllers are OR:ed together and fed to the CPU tile's IRQ input. Each -instance can handle up to 32 interrupts. - -Required properties: -- compatible: "arm,versatile-fpga-irq" -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: The number of cells to define the interrupts. Must be 1 - as the FPGA IRQ controller has no configuration options for interrupt - sources. The cell is a u32 and defines the interrupt number. -- reg: The register bank for the FPGA interrupt controller. -- clear-mask: a u32 number representing the mask written to clear all IRQs - on the controller at boot for example. -- valid-mask: a u32 number representing a bit mask determining which of - the interrupts are valid. Unconnected/unused lines are set to 0, and - the system till not make it possible for devices to request these - interrupts. - -Example: - -pic: pic@14000000 { - compatible = "arm,versatile-fpga-irq"; - #interrupt-cells = <1>; - interrupt-controller; - reg = <0x14000000 0x100>; - clear-mask = <0xffffffff>; - valid-mask = <0x003fffff>; -}; - -Optional properties: -- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ - output is simply connected to the input of another IRQ controller, - then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt deleted file mode 100644 index dd527216c5fb..000000000000 --- a/Documentation/devicetree/bindings/arm/vic.txt +++ /dev/null @@ -1,41 +0,0 @@ -* ARM Vectored Interrupt Controller - -One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM -system for interrupt routing. For multiple controllers they can either be -nested or have the outputs wire-OR'd together. - -Required properties: - -- compatible : should be one of - "arm,pl190-vic" - "arm,pl192-vic" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as - the VIC has no configuration options for interrupt sources. The cell is a u32 - and defines the interrupt number. -- reg : The register bank for the VIC. - -Optional properties: - -- interrupts : Interrupt source for parent controllers if the VIC is nested. -- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit - represents single interrupt source, starting from source 0 at LSb and ending - at source 31 at MSb. A bit that is set means that the source is wired and - clear means otherwise. If unspecified, defaults to all valid. -- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be - configured as wake up source for the system. Order of bits is the same as for - valid-mask property. A set bit means that this interrupt source can be - configured as a wake up source for the system. If unspecied, defaults to all - interrupt sources configurable as wake up sources. - -Example: - - vic0: interrupt-controller@60000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x60000 0x1000>; - - valid-mask = <0xffffff7f>; - valid-wakeup-mask = <0x0000ff7f>; - }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt deleted file mode 100644 index 0a4ce1051b02..000000000000 --- a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt +++ /dev/null @@ -1,16 +0,0 @@ -VIA/Wondermedia VT8500 Interrupt Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-intc" -- reg : Should contain 1 register ranges(address and length) -- #interrupt-cells : should be <1> - -Example: - - intc: interrupt-controller@d8140000 { - compatible = "via,vt8500-intc"; - interrupt-controller; - reg = <0xd8140000 0x10000>; - #interrupt-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/c6x/interrupt.txt b/Documentation/devicetree/bindings/c6x/interrupt.txt deleted file mode 100644 index 42bb796cc4ad..000000000000 --- a/Documentation/devicetree/bindings/c6x/interrupt.txt +++ /dev/null @@ -1,104 +0,0 @@ -C6X Interrupt Chips -------------------- - -* C64X+ Core Interrupt Controller - - The core interrupt controller provides 16 prioritized interrupts to the - C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. - Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt - sources coming from outside the core. - - Required properties: - -------------------- - - compatible: Should be "ti,c64x+core-pic"; - - #interrupt-cells: <1> - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the core interrupt priority level (4-15) where - 4 is highest priority and 15 is lowest priority. - - Example - ------- - core_pic: interrupt-controller@0 { - interrupt-controller; - #interrupt-cells = <1>; - compatible = "ti,c64x+core-pic"; - }; - - - -* C64x+ Megamodule Interrupt Controller - - The megamodule PIC consists of four interrupt mupliplexers each of which - combine up to 32 interrupt inputs into a single interrupt output which - may be cascaded into the core interrupt controller. The megamodule PIC - has a total of 12 outputs cascading into the core interrupt controller. - One for each core interrupt priority level. In addition to the combined - interrupt sources, individual megamodule interrupts may be cascaded to - the core interrupt controller. When an individual interrupt is cascaded, - it is no longer handled through a megamodule interrupt combiner and is - considered to have the core interrupt controller as the parent. - - Required properties: - -------------------- - - compatible: "ti,c64x+megamod-pic" - - interrupt-controller - - #interrupt-cells: <1> - - reg: base address and size of register area - - interrupt-parent: must be core interrupt controller - - interrupts: This should have four cells; one for each interrupt combiner. - The cells contain the core priority interrupt to which the - corresponding combiner output is wired. - - Optional properties: - -------------------- - - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core - priority interrupts. The first cell corresponds to - core priority 4 and the last cell corresponds to - core priority 15. The value of each cell is the - megamodule interrupt source which is MUXed to - the core interrupt corresponding to the cell - position. Allowed values are 4 - 127. Mapping for - interrupts 0 - 3 (combined interrupt sources) are - ignored. - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the megamodule interrupt source (4-127). Note that - interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will - use the core interrupt controller as their parent and the specifier will - be the core priority level, not the megamodule interrupt number. - - Examples - -------- - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - }; - - This is a minimal example where all individual interrupts go through a - combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped - to interrupt 13, etc. - - - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - ti,c64x+megamod-pic-mux = < 0 0 0 0 - 32 0 0 0 - 0 0 0 0 >; - }; - - This the same as the first example except that megamodule interrupt 32 is - mapped directly to core priority interrupt 8. The node using this interrupt - must set the core controller as its interrupt parent and use 8 in the - interrupt specifier value. diff --git a/Documentation/devicetree/bindings/cris/interrupts.txt b/Documentation/devicetree/bindings/cris/interrupts.txt deleted file mode 100644 index e8b123b0a5e6..000000000000 --- a/Documentation/devicetree/bindings/cris/interrupts.txt +++ /dev/null @@ -1,23 +0,0 @@ -* CRISv32 Interrupt Controller - -Interrupt controller for the CRISv32 SoCs. - -Main node required properties: - -- compatible : should be: - "axis,crisv32-intc" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 1. -- reg: physical base address and size of the intc registers map. - -Example: - - intc: interrupt-controller { - compatible = "axis,crisv32-intc"; - reg = <0xb001c000 0x1000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt new file mode 100644 index 000000000000..7803e77d85cb --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -0,0 +1,123 @@ +* ARM Generic Interrupt Controller, version 3 + +AArch64 SMP cores are often associated with a GICv3, providing Private +Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), +Software Generated Interrupts (SGI), and Locality-specific Peripheral +Interrupts (LPI). + +Main node required properties: + +- compatible : should at least contain "arm,gic-v3". +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. Must be a single cell with a value of at least 3. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + Cells 4 and beyond are reserved for future use. When the 1st cell + has a value of 0 or 1, cells 4 and beyond act as padding, and may be + ignored. It is recommended that padding cells have a value of 0. + +- reg : Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + +- interrupts : Interrupt source of the VGIC maintenance interrupt. + +Optional + +- redistributor-stride : If using padding pages, specifies the stride + of consecutive redistributors. Must be a multiple of 64kB. + +- #redistributor-regions: The number of independent contiguous regions + occupied by the redistributors. Required if more than one such + region is present. + +Sub-nodes: + +GICv3 has one or more Interrupt Translation Services (ITS) that are +used to route Message Signalled Interrupts (MSI) to the CPUs. + +These nodes must have the following properties: +- compatible : Should at least contain "arm,gic-v3-its". +- msi-controller : Boolean property. Identifies the node as an MSI controller +- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device + which will generate the MSI. +- reg: Specifies the base physical address and size of the ITS + registers. + +The main GIC node must contain the appropriate #address-cells, +#size-cells and ranges properties for the reg property of all ITS +nodes. + +Examples: + + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0 0x10000>, // GICD + <0x0 0x2f100000 0 0x200000>, // GICR + <0x0 0x2c000000 0 0x2000>, // GICC + <0x0 0x2c010000 0 0x2000>, // GICH + <0x0 0x2c020000 0 0x2000>; // GICV + interrupts = <1 9 4>; + + gic-its@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c200000 0 0x200000>; + }; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x0 0x2c010000 0 0x10000>, // GICD + <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 + <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 + <0x0 0x2c040000 0 0x2000>, // GICC + <0x0 0x2c060000 0 0x2000>, // GICH + <0x0 0x2c080000 0 0x2000>; // GICV + interrupts = <1 9 4>; + + gic-its@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c200000 0 0x200000>; + }; + + gic-its@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c400000 0 0x200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt new file mode 100644 index 000000000000..2da059a4790c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -0,0 +1,152 @@ +* ARM Generic Interrupt Controller + +ARM SMP cores are often associated with a GIC, providing per processor +interrupts (PPI), shared processor interrupts (SPI) and software +generated interrupts (SGI). + +Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. +Secondary GICs are cascaded into the upward interrupt controller and do not +have PPIs or SGIs. + +Main node required properties: + +- compatible : should be one of: + "arm,gic-400" + "arm,cortex-a15-gic" + "arm,cortex-a9-gic" + "arm,cortex-a7-gic" + "arm,arm11mp-gic" + "brcm,brahma-b15-gic" + "arm,arm1176jzf-devchip-gic" + "qcom,msm-8660-qgic" + "qcom,msm-qgic2" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 3. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered (invalid for SPIs) + 4 = active high level-sensitive + 8 = active low level-sensitive (invalid for SPIs). + bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of + the 8 possible cpus attached to the GIC. A bit set to '1' indicated + the interrupt is wired to that CPU. Only valid for PPI interrupts. + Also note that the configurability of PPI interrupts is IMPLEMENTATION + DEFINED and as such not guaranteed to be present (most SoC available + in 2014 seem to ignore the setting of this flag and use the hardware + default value). + +- reg : Specifies base physical address(s) and size of the GIC registers. The + first region is the GIC distributor register base and size. The 2nd region is + the GIC cpu interface register base and size. + +Optional +- interrupts : Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintenance interrupt on primary GIC (see + below). + +- cpu-offset : per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset is + cpu-offset * cpu-nr. + +Example: + + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + +* GIC virtualization extensions (VGIC) + +For ARM cores that support the virtualization extensions, additional +properties must be described (they only exist if the GIC is the +primary interrupt controller). + +Required properties: + +- reg : Additional regions specifying the base physical address and + size of the VGIC registers. The first additional region is the GIC + virtual interface control register base and size. The 2nd additional + region is the GIC virtual cpu interface register base and size. + +- interrupts : VGIC maintenance interrupt. + +Example: + + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x1000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + +* GICv2m extension for MSI/MSI-x support (Optional) + +Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). +This is enabled by specifying v2m sub-node(s). + +Required properties: + +- compatible : The value here should contain "arm,gic-v2m-frame". + +- msi-controller : Identifies the node as an MSI controller. + +- reg : GICv2m MSI interface register base and size + +Optional properties: + +- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect + value, this property should contain the SPI base of + the MSI frame, overriding the HW value. + +- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect + value, this property should contain the number of + SPIs assigned to the frame, overriding the HW value. + +Example: + + interrupt-controller@e1101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + interrupts = <1 8 0xf04>; + ranges = <0 0 0 0xe1100000 0 0x100000>; + reg = <0x0 0xe1110000 0 0x01000>, + <0x0 0xe112f000 0 0x02000>, + <0x0 0xe1140000 0 0x10000>, + <0x0 0xe1160000 0 0x10000>; + v2m0: v2m@0x8000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x80000 0 0x1000>; + }; + + .... + + v2mN: v2m@0x9000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x90000 0 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt new file mode 100644 index 000000000000..c9cf605bb995 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt @@ -0,0 +1,36 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt new file mode 100644 index 000000000000..dd527216c5fb --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt @@ -0,0 +1,41 @@ +* ARM Vectored Interrupt Controller + +One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM +system for interrupt routing. For multiple controllers they can either be +nested or have the outputs wire-OR'd together. + +Required properties: + +- compatible : should be one of + "arm,pl190-vic" + "arm,pl192-vic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as + the VIC has no configuration options for interrupt sources. The cell is a u32 + and defines the interrupt number. +- reg : The register bank for the VIC. + +Optional properties: + +- interrupts : Interrupt source for parent controllers if the VIC is nested. +- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit + represents single interrupt source, starting from source 0 at LSb and ending + at source 31 at MSb. A bit that is set means that the source is wired and + clear means otherwise. If unspecified, defaults to all valid. +- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be + configured as wake up source for the system. Order of bits is the same as for + valid-mask property. A set bit means that this interrupt source can be + configured as a wake up source for the system. If unspecied, defaults to all + interrupt sources configurable as wake up sources. + +Example: + + vic0: interrupt-controller@60000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000 0x1000>; + + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x0000ff7f>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt new file mode 100644 index 000000000000..e8b123b0a5e6 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt @@ -0,0 +1,23 @@ +* CRISv32 Interrupt Controller + +Interrupt controller for the CRISv32 SoCs. + +Main node required properties: + +- compatible : should be: + "axis,crisv32-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller { + compatible = "axis,crisv32-intc"; + reg = <0xb001c000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt new file mode 100644 index 000000000000..80994adab392 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt @@ -0,0 +1,82 @@ +* Meta External Trigger Controller Binding + +This binding specifies what properties must be available in the device tree +representation of a Meta external trigger controller. + +Required properties: + + - compatible: Specifies the compatibility list for the interrupt controller. + The type shall be and the value shall include "img,meta-intc". + + - num-banks: Specifies the number of interrupt banks (each of which can + handle 32 interrupt sources). + + - interrupt-controller: The presence of this property identifies the node + as an interrupt controller. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + - #address-cells: Specifies the number of cells needed to encode an + address. The type shall be and the value shall be 0. As such, + 'interrupt-map' nodes do not have to specify a parent unit address. + +Optional properties: + + - no-mask: The controller doesn't have any mask registers. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + + - <2nd-cell>: The Linux interrupt flags containing level-sense information, + encoded as follows: + 1 = edge triggered + 4 = level-sensitive + +* Examples + +Example 1: + + /* + * Meta external trigger block + */ + intc: intc { + // This is an interrupt controller node. + interrupt-controller; + + // No address cells so that 'interrupt-map' nodes which + // reference this interrupt controller node do not need a parent + // address specifier. + #address-cells = <0>; + + // Two cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Number of interrupt banks + num-banks = <2>; + + // No HWMASKEXT is available (specify on Chorus2 and Comet ES1) + no-mask; + + // Compatible with Meta hardware trigger block. + compatible = "img,meta-intc"; + }; + +Example 2: + + /* + * An interrupt generating device that is wired to a Meta external + * trigger block. + */ + uart1: uart@0x02004c00 { + // Interrupt source '5' that is level-sensitive. + // Note that there are only two cells as specified in the + // interrupt parent's '#interrupt-cells' property. + interrupts = <5 4 /* level */>; + + // The interrupt controller that this device is wired to. + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt new file mode 100644 index 000000000000..a69118550344 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt @@ -0,0 +1,105 @@ +* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding + +This binding specifies what properties must be available in the device tree +representation of a PDC IRQ controller. This has a number of input interrupt +lines which can wake the system, and are passed on through output interrupt +lines. + +Required properties: + + - compatible: Specifies the compatibility list for the interrupt controller. + The type shall be and the value shall include "img,pdc-intc". + + - reg: Specifies the base PDC physical address(s) and size(s) of the + addressable register space. The type shall be . + + - interrupt-controller: The presence of this property identifies the node + as an interrupt controller. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + - num-perips: Number of waking peripherals. + + - num-syswakes: Number of SysWake inputs. + + - interrupts: List of interrupt specifiers. The first specifier shall be the + shared SysWake interrupt, and remaining specifies shall be PDC peripheral + interrupts in order. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + 0-7: Peripheral interrupts + 8-15: SysWake interrupts + + - <2nd-cell>: The level-sense information, encoded using the Linux interrupt + flags as follows (only 4 valid for peripheral interrupts): + 0 = none (decided by software) + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 3 = both edge triggered + 4 = active-high level-sensitive (required for perip irqs) + 8 = active-low level-sensitive + +* Examples + +Example 1: + + /* + * TZ1090 PDC block + */ + pdc: pdc@0x02006000 { + // This is an interrupt controller node. + interrupt-controller; + + // Three cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Offset address of 0x02006000 and size of 0x1000. + reg = <0x02006000 0x1000>; + + // Compatible with Meta hardware trigger block. + compatible = "img,pdc-intc"; + + // Three peripherals are connected. + num-perips = <3>; + + // Four SysWakes are connected. + num-syswakes = <4>; + + interrupts = <18 4 /* level */>, /* Syswakes */ + <30 4 /* level */>, /* Peripheral 0 (RTC) */ + <29 4 /* level */>, /* Peripheral 1 (IR) */ + <31 4 /* level */>; /* Peripheral 2 (WDT) */ + }; + +Example 2: + + /* + * An SoC peripheral that is wired through the PDC. + */ + rtc0 { + // The interrupt controller that this device is wired to. + interrupt-parent = <&pdc>; + + // Interrupt source Peripheral 0 + interrupts = <0 /* Peripheral 0 (RTC) */ + 4> /* IRQ_TYPE_LEVEL_HIGH */ + }; + +Example 3: + + /* + * An interrupt generating device that is wired to a SysWake pin. + */ + touchscreen0 { + // The interrupt controller that this device is wired to. + interrupt-parent = <&pdc>; + + // Interrupt source SysWake 0 that is active-low level-sensitive + interrupts = <8 /* SysWake0 */ + 8 /* IRQ_TYPE_LEVEL_LOW */>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt new file mode 100644 index 000000000000..7d19f494f19a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt @@ -0,0 +1,26 @@ +Interrupt chips +--------------- + +* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) + + Required properties: + -------------------- + compatible = "intel,ce4100-ioapic"; + #interrupt-cells = <2>; + + Device's interrupt property: + + interrupts =

; + + The first number (P) represents the interrupt pin which is wired to the + IO APIC. The second number (S) represents the sense of interrupt which + should be configured and can be one of: + 0 - Edge Rising + 1 - Level Low + 2 - Level High + 3 - Edge Falling + +* Local APIC + Required property: + + compatible = "intel,ce4100-lapic"; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt new file mode 100644 index 000000000000..afef6a85ac51 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -0,0 +1,32 @@ ++Mediatek 65xx/67xx/81xx sysirq + +Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI +interrupt. + +Required properties: +- compatible: should be one of: + "mediatek,mt8173-sysirq" + "mediatek,mt8135-sysirq" + "mediatek,mt8127-sysirq" + "mediatek,mt6795-sysirq" + "mediatek,mt6592-sysirq" + "mediatek,mt6589-sysirq" + "mediatek,mt6582-sysirq" + "mediatek,mt6580-sysirq" + "mediatek,mt6577-sysirq" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Use the same format as specified by GIC in + Documentation/devicetree/bindings/arm/gic.txt +- interrupt-parent: phandle of irq parent for sysirq. The parent must + use the same interrupt-cells format as GIC. +- reg: Physical base address of the intpol registers and length of memory + mapped region. + +Example: + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt new file mode 100644 index 000000000000..8b53273cb22f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt @@ -0,0 +1,60 @@ +* Marvell MMP Interrupt controller + +Required properties: +- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or + "mrvl,mmp2-mux-intc" +- reg : Address and length of the register set of the interrupt controller. + If the interrupt controller is intc, address and length means the range + of the whold interrupt controller. If the interrupt controller is mux-intc, + address and length means one register. Since address of mux-intc is in the + range of intc. mux-intc is secondary interrupt controller. +- reg-names : Name of the register set of the interrupt controller. It's + only required in mux-intc interrupt controller. +- interrupts : Should be the port interrupt shared by mux interrupts. It's + only required in mux-intc interrupt controller. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. +- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt + controller. +- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge + detection first. + +Example: + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + intcmux4@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + +* Marvell Orion Interrupt controller + +Required properties +- compatible : Should be "marvell,orion-intc". +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. Supported value is <1>. +- interrupt-controller : Declare this node to be an interrupt controller. +- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. + One entry in the list represents 32 interrupts. + +Example: + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt new file mode 100644 index 000000000000..539adca19e8f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt @@ -0,0 +1,38 @@ +* NXP LPC32xx Main Interrupt Controller + (MIC, including SIC1 and SIC2 secondary controllers) + +Required properties: +- compatible: Should be "nxp,lpc3220-mic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: Empty for the interrupt controller itself +- #interrupt-cells: The number of cells to define the interrupts. Should be 2. + The first cell is the IRQ number + The second cell is used to specify mode: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Default for internal sources should be set to 4 (active high). +- reg: Should contain MIC registers location and length + +Examples: + /* + * MIC + */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0x40008000 0xC000>; + }; + + /* + * ADC + */ + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 4>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt new file mode 100644 index 000000000000..9e5f73412cd7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt @@ -0,0 +1,52 @@ +* Samsung Exynos Interrupt Combiner Controller + +Samsung's Exynos4 architecture includes a interrupt combiner controller which +can combine interrupt sources as a group and provide a single interrupt request +for the group. The interrupt request from each group are connected to a parent +interrupt controller, such as GIC in case of Exynos4210. + +The interrupt combiner controller consists of multiple combiners. Up to eight +interrupt sources can be connected to a combiner. The combiner outputs one +combined interrupt for its eight interrupt sources. The combined interrupt +is usually connected to a parent interrupt controller. + +A single node in the device tree is used to describe the interrupt combiner +controller module (which includes multiple combiners). A combiner in the +interrupt controller module shares config/control registers with other +combiners. For example, a 32-bit interrupt enable/disable config register +can accommodate up to 4 interrupt combiners (with each combiner supporting +up to 8 interrupt sources). + +Required properties: +- compatible: should be "samsung,exynos4210-combiner". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: should be <2>. The meaning of the cells are + * First Cell: Combiner Group Number. + * Second Cell: Interrupt number within the group. +- reg: Base address and size of interrupt combiner registers. +- interrupts: The list of interrupts generated by the combiners which are then + connected to a parent interrupt controller. The format of the interrupt + specifier depends in the interrupt parent controller. + +Optional properties: +- samsung,combiner-nr: The number of interrupt combiners supported. If this + property is not specified, the default number of combiners is assumed + to be 16. +- interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + + +Example: + + The following is a an example from the Exynos4210 SoC dtsi file. + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt new file mode 100644 index 000000000000..9a5d562435ea --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt @@ -0,0 +1,24 @@ +* ARC700 incore Interrupt Controller + + The core interrupt controller provides 32 prioritised interrupts (2 levels) + to ARC700 core. + +Properties: + +- compatible: "snps,arc700-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1>. + + Single Cell "interrupts" property of a device specifies the IRQ number + between 0 to 31 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt new file mode 100644 index 000000000000..0dcb7c7d3e40 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -0,0 +1,46 @@ +* ARC-HS Interrupt Distribution Unit + + This optional 2nd level interrupt controller can be used in SMP configurations for + dynamic IRQ routing, load balancing of common/external IRQs towards core intc. + +Properties: + +- compatible: "snps,archs-idu-intc" +- interrupt-controller: This is an interrupt controller. +- interrupt-parent: +- #interrupt-cells: Must be <2>. +- interrupts: <...> specifies the upstream core irqs + + First cell specifies the "common" IRQ from peripheral to IDU + Second cell specifies the irq distribution mode to cores + 0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + + /* + * + * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + */ + #interrupt-cells = <2>; + + /* upstream core irqs: downstream these are "COMMON" irq 0,1.. */ + interrupts = <24 25 26 27 28 29 30 31>; + }; + + some_device: serial@c0fc1000 { + interrupt-parent = <&idu_intc>; + interrupts = <0 0>; /* upstream idu IRQ #24, Round Robin */ + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt new file mode 100644 index 000000000000..69f326d6a5ad --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt @@ -0,0 +1,22 @@ +* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA) + +Properties: + +- compatible: "snps,archs-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1>. + + Single Cell "interrupts" property of a device specifies the IRQ number + between 16 to 256 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + + intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <16 17 18 19 20 21 22 23 24 25>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt new file mode 100644 index 000000000000..715a013ed4bd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt @@ -0,0 +1,48 @@ +* SPEAr Shared IRQ layer (shirq) + +SPEAr3xx architecture includes shared/multiplexed irqs for certain set +of devices. The multiplexor provides a single interrupt to parent +interrupt controller (VIC) on behalf of a group of devices. + +There can be multiple groups available on SPEAr3xx variants but not +exceeding 4. The number of devices in a group can differ, further they +may share same set of status/mask registers spanning across different +bit masks. Also in some cases the group may not have enable or other +registers. This makes software little complex. + +A single node in the device tree is used to describe the shared +interrupt multiplexor (one node for all groups). A group in the +interrupt controller shares config/control registers with other groups. +For example, a 32-bit interrupt enable/disable config register can +accommodate up to 4 interrupt groups. + +Required properties: + - compatible: should be, either of + - "st,spear300-shirq" + - "st,spear310-shirq" + - "st,spear320-shirq" + - interrupt-controller: Identifies the node as an interrupt controller. + - #interrupt-cells: should be <1> which basically contains the offset + (starting from 0) of interrupts for all the groups. + - reg: Base address and size of shirq registers. + - interrupts: The list of interrupts generated by the groups which are + then connected to a parent interrupt controller. Each group is + associated with one of the interrupts, hence number of interrupts (to + parent) is equal to number of groups. The format of the interrupt + specifier depends in the interrupt parent controller. + + Optional properties: + - interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + +Example: + +The following is an example from the SPEAr320 SoC dtsi file. + +shirq: interrupt-controller@0xb3000000 { + compatible = "st,spear320-shirq"; + reg = <0xb3000000 0x1000>; + interrupts = <28 29 30 1>; + #interrupt-cells = <1>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt new file mode 100644 index 000000000000..42bb796cc4ad --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt @@ -0,0 +1,104 @@ +C6X Interrupt Chips +------------------- + +* C64X+ Core Interrupt Controller + + The core interrupt controller provides 16 prioritized interrupts to the + C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. + Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt + sources coming from outside the core. + + Required properties: + -------------------- + - compatible: Should be "ti,c64x+core-pic"; + - #interrupt-cells: <1> + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the core interrupt priority level (4-15) where + 4 is highest priority and 15 is lowest priority. + + Example + ------- + core_pic: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + + +* C64x+ Megamodule Interrupt Controller + + The megamodule PIC consists of four interrupt mupliplexers each of which + combine up to 32 interrupt inputs into a single interrupt output which + may be cascaded into the core interrupt controller. The megamodule PIC + has a total of 12 outputs cascading into the core interrupt controller. + One for each core interrupt priority level. In addition to the combined + interrupt sources, individual megamodule interrupts may be cascaded to + the core interrupt controller. When an individual interrupt is cascaded, + it is no longer handled through a megamodule interrupt combiner and is + considered to have the core interrupt controller as the parent. + + Required properties: + -------------------- + - compatible: "ti,c64x+megamod-pic" + - interrupt-controller + - #interrupt-cells: <1> + - reg: base address and size of register area + - interrupt-parent: must be core interrupt controller + - interrupts: This should have four cells; one for each interrupt combiner. + The cells contain the core priority interrupt to which the + corresponding combiner output is wired. + + Optional properties: + -------------------- + - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core + priority interrupts. The first cell corresponds to + core priority 4 and the last cell corresponds to + core priority 15. The value of each cell is the + megamodule interrupt source which is MUXed to + the core interrupt corresponding to the cell + position. Allowed values are 4 - 127. Mapping for + interrupts 0 - 3 (combined interrupt sources) are + ignored. + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the megamodule interrupt source (4-127). Note that + interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will + use the core interrupt controller as their parent and the specifier will + be the core priority level, not the megamodule interrupt number. + + Examples + -------- + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + }; + + This is a minimal example where all individual interrupts go through a + combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped + to interrupt 13, etc. + + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + ti,c64x+megamod-pic-mux = < 0 0 0 0 + 32 0 0 0 + 0 0 0 0 >; + }; + + This the same as the first example except that megamodule interrupt 32 is + mapped directly to core priority interrupt 8. The node using this interrupt + must set the core controller as its interrupt parent and use 8 in the + interrupt specifier value. diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt new file mode 100644 index 000000000000..597e8a089fe4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt @@ -0,0 +1,27 @@ +* TI Common Platform Interrupt Controller + +Common Platform Interrupt Controller (cp_intc) is used on +OMAP-L1x SoCs and can support several configurable number +of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,cp-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <101>; + reg = <0xfffee000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt new file mode 100644 index 000000000000..f2583e6ec060 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt @@ -0,0 +1,27 @@ +* OMAP Interrupt Controller + +OMAP2/3 are using a TI interrupt controller that can support several +configurable number of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,omap2-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x48200000 0x1000>; + }; + diff --git a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt new file mode 100644 index 000000000000..0a4ce1051b02 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt @@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/metag/meta-intc.txt b/Documentation/devicetree/bindings/metag/meta-intc.txt deleted file mode 100644 index 80994adab392..000000000000 --- a/Documentation/devicetree/bindings/metag/meta-intc.txt +++ /dev/null @@ -1,82 +0,0 @@ -* Meta External Trigger Controller Binding - -This binding specifies what properties must be available in the device tree -representation of a Meta external trigger controller. - -Required properties: - - - compatible: Specifies the compatibility list for the interrupt controller. - The type shall be and the value shall include "img,meta-intc". - - - num-banks: Specifies the number of interrupt banks (each of which can - handle 32 interrupt sources). - - - interrupt-controller: The presence of this property identifies the node - as an interrupt controller. No property value shall be defined. - - - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 2. - - - #address-cells: Specifies the number of cells needed to encode an - address. The type shall be and the value shall be 0. As such, - 'interrupt-map' nodes do not have to specify a parent unit address. - -Optional properties: - - - no-mask: The controller doesn't have any mask registers. - -* Interrupt Specifier Definition - - Interrupt specifiers consists of 2 cells encoded as follows: - - - <1st-cell>: The interrupt-number that identifies the interrupt source. - - - <2nd-cell>: The Linux interrupt flags containing level-sense information, - encoded as follows: - 1 = edge triggered - 4 = level-sensitive - -* Examples - -Example 1: - - /* - * Meta external trigger block - */ - intc: intc { - // This is an interrupt controller node. - interrupt-controller; - - // No address cells so that 'interrupt-map' nodes which - // reference this interrupt controller node do not need a parent - // address specifier. - #address-cells = <0>; - - // Two cells to encode interrupt sources. - #interrupt-cells = <2>; - - // Number of interrupt banks - num-banks = <2>; - - // No HWMASKEXT is available (specify on Chorus2 and Comet ES1) - no-mask; - - // Compatible with Meta hardware trigger block. - compatible = "img,meta-intc"; - }; - -Example 2: - - /* - * An interrupt generating device that is wired to a Meta external - * trigger block. - */ - uart1: uart@0x02004c00 { - // Interrupt source '5' that is level-sensitive. - // Note that there are only two cells as specified in the - // interrupt parent's '#interrupt-cells' property. - interrupts = <5 4 /* level */>; - - // The interrupt controller that this device is wired to. - interrupt-parent = <&intc>; - }; diff --git a/Documentation/devicetree/bindings/metag/pdc-intc.txt b/Documentation/devicetree/bindings/metag/pdc-intc.txt deleted file mode 100644 index a69118550344..000000000000 --- a/Documentation/devicetree/bindings/metag/pdc-intc.txt +++ /dev/null @@ -1,105 +0,0 @@ -* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding - -This binding specifies what properties must be available in the device tree -representation of a PDC IRQ controller. This has a number of input interrupt -lines which can wake the system, and are passed on through output interrupt -lines. - -Required properties: - - - compatible: Specifies the compatibility list for the interrupt controller. - The type shall be and the value shall include "img,pdc-intc". - - - reg: Specifies the base PDC physical address(s) and size(s) of the - addressable register space. The type shall be . - - - interrupt-controller: The presence of this property identifies the node - as an interrupt controller. No property value shall be defined. - - - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 2. - - - num-perips: Number of waking peripherals. - - - num-syswakes: Number of SysWake inputs. - - - interrupts: List of interrupt specifiers. The first specifier shall be the - shared SysWake interrupt, and remaining specifies shall be PDC peripheral - interrupts in order. - -* Interrupt Specifier Definition - - Interrupt specifiers consists of 2 cells encoded as follows: - - - <1st-cell>: The interrupt-number that identifies the interrupt source. - 0-7: Peripheral interrupts - 8-15: SysWake interrupts - - - <2nd-cell>: The level-sense information, encoded using the Linux interrupt - flags as follows (only 4 valid for peripheral interrupts): - 0 = none (decided by software) - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 3 = both edge triggered - 4 = active-high level-sensitive (required for perip irqs) - 8 = active-low level-sensitive - -* Examples - -Example 1: - - /* - * TZ1090 PDC block - */ - pdc: pdc@0x02006000 { - // This is an interrupt controller node. - interrupt-controller; - - // Three cells to encode interrupt sources. - #interrupt-cells = <2>; - - // Offset address of 0x02006000 and size of 0x1000. - reg = <0x02006000 0x1000>; - - // Compatible with Meta hardware trigger block. - compatible = "img,pdc-intc"; - - // Three peripherals are connected. - num-perips = <3>; - - // Four SysWakes are connected. - num-syswakes = <4>; - - interrupts = <18 4 /* level */>, /* Syswakes */ - <30 4 /* level */>, /* Peripheral 0 (RTC) */ - <29 4 /* level */>, /* Peripheral 1 (IR) */ - <31 4 /* level */>; /* Peripheral 2 (WDT) */ - }; - -Example 2: - - /* - * An SoC peripheral that is wired through the PDC. - */ - rtc0 { - // The interrupt controller that this device is wired to. - interrupt-parent = <&pdc>; - - // Interrupt source Peripheral 0 - interrupts = <0 /* Peripheral 0 (RTC) */ - 4> /* IRQ_TYPE_LEVEL_HIGH */ - }; - -Example 3: - - /* - * An interrupt generating device that is wired to a SysWake pin. - */ - touchscreen0 { - // The interrupt controller that this device is wired to. - interrupt-parent = <&pdc>; - - // Interrupt source SysWake 0 that is active-low level-sensitive - interrupts = <8 /* SysWake0 */ - 8 /* IRQ_TYPE_LEVEL_LOW */>; - }; diff --git a/Documentation/devicetree/bindings/x86/interrupt.txt b/Documentation/devicetree/bindings/x86/interrupt.txt deleted file mode 100644 index 7d19f494f19a..000000000000 --- a/Documentation/devicetree/bindings/x86/interrupt.txt +++ /dev/null @@ -1,26 +0,0 @@ -Interrupt chips ---------------- - -* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) - - Required properties: - -------------------- - compatible = "intel,ce4100-ioapic"; - #interrupt-cells = <2>; - - Device's interrupt property: - - interrupts =

; - - The first number (P) represents the interrupt pin which is wired to the - IO APIC. The second number (S) represents the sense of interrupt which - should be configured and can be one of: - 0 - Edge Rising - 1 - Level Low - 2 - Level High - 3 - Edge Falling - -* Local APIC - Required property: - - compatible = "intel,ce4100-lapic";