From: Lennert Buytenhek Date: Sat, 25 Jun 2005 15:58:21 +0000 (+0100) Subject: [PATCH] ARM: 2750/1: add i2c platform device for enp2611 on-board i2c bus X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ea23d1ac7e380aefc00d691c7c9a3e747bc2531f;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] ARM: 2750/1: add i2c platform device for enp2611 on-board i2c bus Patch from Lennert Buytenhek On the enp2611, GPIO 7 and 6 are connected to an on-board i2c bus that attaches to the SODIMM module slot (for SPD) and an LM84 temperature sensor. Add a platform device for this i2c bus. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 04b38bcf9aac..f3a291b6a9fb 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -197,8 +197,23 @@ static struct platform_device enp2611_flash = { .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void)