From: David Daney Date: Fri, 24 Apr 2009 00:44:38 +0000 (-0700) Subject: MIPS: Add Cavium OCTEON PCI support. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e8635b484f644c7873e6091f15330c49396f2cbc;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git MIPS: Add Cavium OCTEON PCI support. This patch adds support for PCI and PCIe to the base Cavium OCTEON processor support. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 25f3b0a11ca..96f05e588f4 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -618,6 +618,8 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE + select HW_HAS_PCI + select ARCH_SUPPORTS_MSI help This option supports all of the Octeon reference boards from Cavium Networks. It builds a kernel that dynamically determines the Octeon diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index d6903c3f3d5..7c0528b0e34 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -14,5 +14,9 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PCI) += pci-common.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_PCI) += pcie.o +obj-$(CONFIG_PCI_MSI) += msi.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 01b1ef94b36..627c162a615 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -13,20 +13,327 @@ */ #include #include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include #include +#ifdef CONFIG_PCI +#include "pci-common.h" +#endif + +#define BAR2_PCI_ADDRESS 0x8000000000ul + +struct bar1_index_state { + int16_t ref_count; /* Number of PCI mappings using this index */ + uint16_t address_bits; /* Upper bits of physical address. This is + shifted 22 bits */ +}; + +#ifdef CONFIG_PCI +static DEFINE_SPINLOCK(bar1_lock); +static struct bar1_index_state bar1_state[32]; +#endif + dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) { +#ifndef CONFIG_PCI /* Without PCI/PCIe this function can be called for Octeon internal devices such as USB. These devices all support 64bit addressing */ mb(); return virt_to_phys(ptr); +#else + unsigned long flags; + uint64_t dma_mask; + int64_t start_index; + dma_addr_t result = -1; + uint64_t physical = virt_to_phys(ptr); + int64_t index; + + mb(); + /* + * Use the DMA masks to determine the allowed memory + * region. For us it doesn't limit the actual memory, just the + * address visible over PCI. Devices with limits need to use + * lower indexed Bar1 entries. + */ + if (dev) { + dma_mask = dev->coherent_dma_mask; + if (dev->dma_mask) + dma_mask = *dev->dma_mask; + } else { + dma_mask = 0xfffffffful; + } + + /* + * Platform devices, such as the internal USB, skip all + * translation and use Octeon physical addresses directly. + */ + if (!dev || dev->bus == &platform_bus_type) + return physical; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_PCIE: + if (unlikely(physical < (16ul << 10))) + panic("dma_map_single: Not allowed to map first 16KB." + " It interferes with BAR0 special area\n"); + else if ((physical + size >= (256ul << 20)) && + (physical < (512ul << 20))) + panic("dma_map_single: Not allowed to map bootbus\n"); + else if ((physical + size >= 0x400000000ull) && + physical < 0x410000000ull) + panic("dma_map_single: " + "Attempt to map illegal memory address 0x%llx\n", + physical); + else if (physical >= 0x420000000ull) + panic("dma_map_single: " + "Attempt to map illegal memory address 0x%llx\n", + physical); + else if ((physical + size >= + (4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20)) + && physical < (4ull<<30)) + pr_warning("dma_map_single: Warning: " + "Mapping memory address that might " + "conflict with devices 0x%llx-0x%llx\n", + physical, physical+size-1); + /* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */ + if ((physical >= 0x410000000ull) && physical < 0x420000000ull) + result = physical - 0x400000000ull; + else + result = physical; + if (((result+size-1) & dma_mask) != result+size-1) + panic("dma_map_single: Attempt to map address " + "0x%llx-0x%llx, which can't be accessed " + "according to the dma mask 0x%llx\n", + physical, physical+size-1, dma_mask); + goto done; + + case OCTEON_DMA_BAR_TYPE_BIG: +#ifdef CONFIG_64BIT + /* If the device supports 64bit addressing, then use BAR2 */ + if (dma_mask > BAR2_PCI_ADDRESS) { + result = physical + BAR2_PCI_ADDRESS; + goto done; + } +#endif + if (unlikely(physical < (4ul << 10))) { + panic("dma_map_single: Not allowed to map first 4KB. " + "It interferes with BAR0 special area\n"); + } else if (physical < (256ul << 20)) { + if (unlikely(physical + size > (256ul << 20))) + panic("dma_map_single: Requested memory spans " + "Bar0 0:256MB and bootbus\n"); + result = physical; + goto done; + } else if (unlikely(physical < (512ul << 20))) { + panic("dma_map_single: Not allowed to map bootbus\n"); + } else if (physical < (2ul << 30)) { + if (unlikely(physical + size > (2ul << 30))) + panic("dma_map_single: Requested memory spans " + "Bar0 512MB:2GB and BAR1\n"); + result = physical; + goto done; + } else if (physical < (2ul << 30) + (128 << 20)) { + /* Fall through */ + } else if (physical < + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) { + if (unlikely + (physical + size > + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20))) + panic("dma_map_single: Requested memory " + "extends past Bar1 (4GB-%luMB)\n", + OCTEON_PCI_BAR1_HOLE_SIZE); + result = physical; + goto done; + } else if ((physical >= 0x410000000ull) && + (physical < 0x420000000ull)) { + if (unlikely(physical + size > 0x420000000ull)) + panic("dma_map_single: Requested memory spans " + "non existant memory\n"); + /* BAR0 fixed mapping 256MB:512MB -> + * 16GB+256MB:16GB+512MB */ + result = physical - 0x400000000ull; + goto done; + } else { + /* Continued below switch statement */ + } + break; + + case OCTEON_DMA_BAR_TYPE_SMALL: +#ifdef CONFIG_64BIT + /* If the device supports 64bit addressing, then use BAR2 */ + if (dma_mask > BAR2_PCI_ADDRESS) { + result = physical + BAR2_PCI_ADDRESS; + goto done; + } +#endif + /* Continued below switch statement */ + break; + + default: + panic("dma_map_single: Invalid octeon_dma_bar_type\n"); + } + + /* Don't allow mapping to span multiple Bar entries. The hardware guys + won't guarantee that DMA across boards work */ + if (unlikely((physical >> 22) != ((physical + size - 1) >> 22))) + panic("dma_map_single: " + "Requested memory spans more than one Bar1 entry\n"); + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + start_index = 31; + else if (unlikely(dma_mask < (1ul << 27))) + start_index = (dma_mask >> 22); + else + start_index = 31; + + /* Only one processor can access the Bar register at once */ + spin_lock_irqsave(&bar1_lock, flags); + + /* Look through Bar1 for existing mapping that will work */ + for (index = start_index; index >= 0; index--) { + if ((bar1_state[index].address_bits == physical >> 22) && + (bar1_state[index].ref_count)) { + /* An existing mapping will work, use it */ + bar1_state[index].ref_count++; + if (unlikely(bar1_state[index].ref_count < 0)) + panic("dma_map_single: " + "Bar1[%d] reference count overflowed\n", + (int) index); + result = (index << 22) | (physical & ((1 << 22) - 1)); + /* Large BAR1 is offset at 2GB */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + result += 2ul << 30; + goto done_unlock; + } + } + + /* No existing mappings, look for a free entry */ + for (index = start_index; index >= 0; index--) { + if (unlikely(bar1_state[index].ref_count == 0)) { + union cvmx_pci_bar1_indexx bar1_index; + /* We have a free entry, use it */ + bar1_state[index].ref_count = 1; + bar1_state[index].address_bits = physical >> 22; + bar1_index.u32 = 0; + /* Address bits[35:22] sent to L2C */ + bar1_index.s.addr_idx = physical >> 22; + /* Don't put PCI accesses in L2. */ + bar1_index.s.ca = 1; + /* Endian Swap Mode */ + bar1_index.s.end_swp = 1; + /* Set '1' when the selected address range is valid. */ + bar1_index.s.addr_v = 1; + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), + bar1_index.u32); + /* An existing mapping will work, use it */ + result = (index << 22) | (physical & ((1 << 22) - 1)); + /* Large BAR1 is offset at 2GB */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) + result += 2ul << 30; + goto done_unlock; + } + } + + pr_err("dma_map_single: " + "Can't find empty BAR1 index for physical mapping 0x%llx\n", + (unsigned long long) physical); + +done_unlock: + spin_unlock_irqrestore(&bar1_lock, flags); +done: + pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result); + return result; +#endif } void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) { - /* Without PCI/PCIe this function can be called for Octeon internal - * devices such as USB. These devices all support 64bit addressing */ +#ifndef CONFIG_PCI + /* + * Without PCI/PCIe this function can be called for Octeon internal + * devices such as USB. These devices all support 64bit addressing. + */ + return; +#else + unsigned long flags; + uint64_t index; + + /* + * Platform devices, such as the internal USB, skip all + * translation and use Octeon physical addresses directly. + */ + if (dev->bus == &platform_bus_type) + return; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_PCIE: + /* Nothing to do, all mappings are static */ + goto done; + + case OCTEON_DMA_BAR_TYPE_BIG: +#ifdef CONFIG_64BIT + /* Nothing to do for addresses using BAR2 */ + if (dma_addr >= BAR2_PCI_ADDRESS) + goto done; +#endif + if (unlikely(dma_addr < (4ul << 10))) + panic("dma_unmap_single: Unexpect DMA address 0x%llx\n", + dma_addr); + else if (dma_addr < (2ul << 30)) + /* Nothing to do for addresses using BAR0 */ + goto done; + else if (dma_addr < (2ul << 30) + (128ul << 20)) + /* Need to unmap, fall through */ + index = (dma_addr - (2ul << 30)) >> 22; + else if (dma_addr < + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) + goto done; /* Nothing to do for the rest of BAR1 */ + else + panic("dma_unmap_single: Unexpect DMA address 0x%llx\n", + dma_addr); + /* Continued below switch statement */ + break; + + case OCTEON_DMA_BAR_TYPE_SMALL: +#ifdef CONFIG_64BIT + /* Nothing to do for addresses using BAR2 */ + if (dma_addr >= BAR2_PCI_ADDRESS) + goto done; +#endif + index = dma_addr >> 22; + /* Continued below switch statement */ + break; + + default: + panic("dma_unmap_single: Invalid octeon_dma_bar_type\n"); + } + + if (unlikely(index > 31)) + panic("dma_unmap_single: " + "Attempt to unmap an invalid address (0x%llx)\n", + dma_addr); + + spin_lock_irqsave(&bar1_lock, flags); + bar1_state[index].ref_count--; + if (bar1_state[index].ref_count == 0) + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); + else if (unlikely(bar1_state[index].ref_count < 0)) + panic("dma_unmap_single: Bar1[%u] reference count < 0\n", + (int) index); + spin_unlock_irqrestore(&bar1_lock, flags); +done: + pr_debug("dma_unmap_single 0x%llx\n", dma_addr); return; +#endif } diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile index 80d6cb26766..2fd66db6939 100644 --- a/arch/mips/cavium-octeon/executive/Makefile +++ b/arch/mips/cavium-octeon/executive/Makefile @@ -11,3 +11,4 @@ obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o +obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c new file mode 100644 index 00000000000..8fb82057cd8 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c @@ -0,0 +1,70 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Fixes and workaround for Octeon chip errata. This file + * contains functions called by cvmx-helper to workaround known + * chip errata. For the most part, code doesn't need to call + * these functions directly. + * + */ +#include + +#include + +/** + * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass + * 1 doesn't work properly. The following code disables 2nd order + * CDR for the specified QLM. + * + * @qlm: QLM to disable 2nd order CDR for. + */ +void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) +{ + int lane; + cvmx_helper_qlm_jtag_init(); + /* We need to load all four lanes of the QLM, a total of 1072 bits */ + for (lane = 0; lane < 4; lane++) { + /* + * Each lane has 268 bits. We need to set + * cfg_cdr_incx<67:64> = 3 and cfg_cdr_secord<77> = + * 1. All other bits are zero. Bits go in LSB first, + * so start off with the zeros for bits <63:0>. + */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1); + /* cfg_cdr_incx<67:64>=3 */ + cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3); + /* Zeros for bits <76:68> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1); + /* cfg_cdr_secord<77>=1 */ + cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1); + /* Zeros for bits <267:78> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1); + } + cvmx_helper_qlm_jtag_update(qlm); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c new file mode 100644 index 00000000000..c1c54890bae --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -0,0 +1,144 @@ + +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Helper utilities for qlm_jtag. + * + */ + +#include +#include + + +/** + * Initialize the internal QLM JTAG logic to allow programming + * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. + * These functions should only be used at the direction of Cavium + * Networks. Programming incorrect values into the JTAG chain + * can cause chip damage. + */ +void cvmx_helper_qlm_jtag_init(void) +{ + union cvmx_ciu_qlm_jtgc jtgc; + uint32_t clock_div = 0; + uint32_t divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000); + divisor = (divisor - 1) >> 2; + /* Convert the divisor into a power of 2 shift */ + while (divisor) { + clock_div++; + divisor = divisor >> 1; + } + + /* + * Clock divider for QLM JTAG operations. eclk is divided by + * 2^(CLK_DIV + 2) + */ + jtgc.u64 = 0; + jtgc.s.clk_div = clock_div; + jtgc.s.mux_sel = 0; + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + jtgc.s.bypass = 0x3; + else + jtgc.s.bypass = 0xf; + cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64); + cvmx_read_csr(CVMX_CIU_QLM_JTGC); +} + +/** + * Write up to 32bits into the QLM jtag chain. Bits are shifted + * into the MSB and out the LSB, so you should shift in the low + * order bits followed by the high order bits. The JTAG chain is + * 4 * 268 bits long, or 1072. + * + * @qlm: QLM to shift value into + * @bits: Number of bits to shift in (1-32). + * @data: Data to shift in. Bit 0 enters the chain first, followed by + * bit 1, etc. + * + * Returns The low order bits of the JTAG chain that shifted out of the + * circle. + */ +uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) +{ + union cvmx_ciu_qlm_jtgd jtgd; + jtgd.u64 = 0; + jtgd.s.shift = 1; + jtgd.s.shft_cnt = bits - 1; + jtgd.s.shft_reg = data; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.shift); + return jtgd.s.shft_reg >> (32 - bits); +} + +/** + * Shift long sequences of zeros into the QLM JTAG chain. It is + * common to need to shift more than 32 bits of zeros into the + * chain. This function is a convience wrapper around + * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of + * zeros at a time. + * + * @qlm: QLM to shift zeros into + * @bits: + */ +void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits) +{ + while (bits > 0) { + int n = bits; + if (n > 32) + n = 32; + cvmx_helper_qlm_jtag_shift(qlm, n, 0); + bits -= n; + } +} + +/** + * Program the QLM JTAG chain into all lanes of the QLM. You must + * have already shifted in 268*4, or 1072 bits into the JTAG + * chain. Updating invalid values can possibly cause chip damage. + * + * @qlm: QLM to program + */ +void cvmx_helper_qlm_jtag_update(int qlm) +{ + union cvmx_ciu_qlm_jtgd jtgd; + + /* Update the new data */ + jtgd.u64 = 0; + jtgd.s.update = 1; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.update); +} diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/cavium-octeon/msi.c new file mode 100644 index 00000000000..964b03b75a8 --- /dev/null +++ b/arch/mips/cavium-octeon/msi.c @@ -0,0 +1,288 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "pci-common.h" + +/* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ +static uint64_t msi_free_irq_bitmask; + +/* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ +static uint64_t msi_multiple_irq_bitmask; + +/* + * This lock controls updates to msi_free_irq_bitmask and + * msi_multiple_irq_bitmask. + */ +static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); + + +/** + * Called when a driver request MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * @param dev Device requesting MSI interrupts + * @param desc MSI descriptor + * + * Returns 0 on success. + */ +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + uint16_t control; + int configured_private_bits; + int request_private_bits; + int irq; + int irq_step; + uint64_t search_mask; + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) + request_private_bits = 0; + +try_only_one: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = 1 << request_private_bits; + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&msi_free_irq_bitmask_lock); + for (irq = 0; irq < 64; irq += irq_step) { + if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) { + msi_free_irq_bitmask |= search_mask << irq; + msi_multiple_irq_bitmask |= (search_mask >> 1) << irq; + break; + } + } + spin_unlock(&msi_free_irq_bitmask_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (irq >= 64) { + if (request_private_bits) { + pr_err("arch_setup_msi_irq: Unable to find %d free " + "interrupts, trying just one", + 1 << request_private_bits); + request_private_bits = 0; + goto try_only_one; + } else + panic("arch_setup_msi_irq: Unable to find a free MSI " + "interrupt"); + } + + /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ + irq += OCTEON_IRQ_MSI_BIT0; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_SMALL: + /* When not using big bar, Bar 0 is based at 128MB */ + msg.address_lo = + ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; + case OCTEON_DMA_BAR_TYPE_BIG: + /* When using big bar, Bar 0 is based at 0 */ + msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_PCIE: + /* When using PCIe, Bar 0 is based at 0 */ + /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ + msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; + break; + default: + panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); + } + msg.data = irq - OCTEON_IRQ_MSI_BIT0; + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= request_private_bits << 4; + pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, + control); + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + return 0; +} + + +/** + * Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + * + * @irq: The devices first irq number. There may be multple in sequence. + */ +void arch_teardown_msi_irq(unsigned int irq) +{ + int number_irqs; + uint64_t bitmask; + + if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63)) + panic("arch_teardown_msi_irq: Attempted to teardown illegal " + "MSI interrupt (%d)", irq); + irq -= OCTEON_IRQ_MSI_BIT0; + + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while ((irq+number_irqs < 64) && + (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs)))) + number_irqs++; + number_irqs++; + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + /* Shift the mask to the correct bit location */ + bitmask <<= irq; + if ((msi_free_irq_bitmask & bitmask) != bitmask) + panic("arch_teardown_msi_irq: Attempted to teardown MSI " + "interrupt (%d) not in use", irq); + + /* Checks are done, update the in use bitmask */ + spin_lock(&msi_free_irq_bitmask_lock); + msi_free_irq_bitmask &= ~bitmask; + msi_multiple_irq_bitmask &= ~bitmask; + spin_unlock(&msi_free_irq_bitmask_lock); +} + + +/** + * Called by the interrupt handling code when an MSI interrupt + * occurs. + * + * @param cpl + * @param dev_id + * + * @return + */ +static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) +{ + uint64_t msi_bits; + int irq; + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) + msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0); + else + msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV); + irq = fls64(msi_bits); + if (irq) { + irq += OCTEON_IRQ_MSI_BIT0 - 1; + if (irq_desc[irq].action) { + do_IRQ(irq); + return IRQ_HANDLED; + } else { + pr_err("Spurious MSI interrupt %d\n", irq); + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + /* These chips have PCIe */ + cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } else { + /* These chips have PCI */ + cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV, + 1ull << (irq - + OCTEON_IRQ_MSI_BIT0)); + } + } + } + return IRQ_NONE; +} + + +/** + * Initializes the MSI interrupt handling code + * + * @return + */ +int octeon_msi_initialize(void) +{ + int r; + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:63]", octeon_msi_interrupt); + } else if (octeon_is_pci_host()) { + r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[0:15]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[16:31]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[32:47]", octeon_msi_interrupt); + r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[48:63]", octeon_msi_interrupt); + } + return 0; +} + +subsys_initcall(octeon_msi_initialize); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index d3a0c8154be..8dfa009e007 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -10,6 +10,8 @@ #include #include +#include +#include DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c new file mode 100644 index 00000000000..cd029f88da7 --- /dev/null +++ b/arch/mips/cavium-octeon/pci-common.c @@ -0,0 +1,137 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include +#include +#include +#include +#include +#include +#include "pci-common.h" + +typeof(pcibios_map_irq) *octeon_pcibios_map_irq; +enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; + +/** + * Map a PCI device to the appropriate interrupt line + * + * @param dev The Linux PCI device structure for the device to map + * @param slot The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @param pin The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * @return Interrupt number for the device + */ +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (octeon_pcibios_map_irq) + return octeon_pcibios_map_irq(dev, slot, pin); + else + panic("octeon_pcibios_map_irq doesn't point to a " + "pcibios_map_irq() function"); +} + + +/** + * Called to perform platform specific PCI setup + * + * @param dev + * @return + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + uint16_t config; + uint32_t dconfig; + int pos; + /* + * Force the Cache line setting to 64 bytes. The standard + * Linux bus scan doesn't seem to set it. Octeon really has + * 128 byte lines, but Intel bridges get really upset if you + * try and set values above 64 bytes. Value is specified in + * 32bit words. + */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); + /* Set latency timers for all devices */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); + + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (config & PCI_ERR_CAP_ECRC_GENC) + config |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (config & PCI_ERR_CAP_ECRC_CHKC) + config |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Report all errors to the root complex */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + + return 0; +} diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h new file mode 100644 index 00000000000..74ae79991e4 --- /dev/null +++ b/arch/mips/cavium-octeon/pci-common.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#ifndef __OCTEON_PCI_COMMON_H__ +#define __OCTEON_PCI_COMMON_H__ + +#include + +/* Some PCI cards require delays when accessing config space. */ +#define PCI_CONFIG_SPACE_DELAY 10000 + +/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the + Octeon specific version pointed to by this variable. This function needs to + change for PCI or PCIe based hosts */ +extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; + +/* The following defines are only used when octeon_dma_bar_type = + OCTEON_DMA_BAR_TYPE_BIG */ +#define OCTEON_PCI_BAR1_HOLE_BITS 5 +#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) + +enum octeon_dma_bar_type { + OCTEON_DMA_BAR_TYPE_INVALID, + OCTEON_DMA_BAR_TYPE_SMALL, + OCTEON_DMA_BAR_TYPE_BIG, + OCTEON_DMA_BAR_TYPE_PCIE +}; + +/** + * This is a variable to tell the DMA mapping system in dma-octeon.c + * how to map PCI DMA addresses. + */ +extern enum octeon_dma_bar_type octeon_dma_bar_type; + +#endif diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/cavium-octeon/pci.c new file mode 100644 index 00000000000..67c0ff5e92f --- /dev/null +++ b/arch/mips/cavium-octeon/pci.c @@ -0,0 +1,568 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2007 Cavium Networks + */ +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "pci-common.h" + +#define USE_OCTEON_INTERNAL_ARBITER + +/* + * Octeon's PCI controller uses did=3, subdid=2 for PCI IO + * addresses. Use PCI endian swapping 1 so no address swapping is + * necessary. The Linux io routines will endian swap the data. + */ +#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull +#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) + +/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ +#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) + +/** + * This is the bit decoding used for the Octeon PCI controller addresses + */ +union octeon_pci_address { + uint64_t u64; + struct { + uint64_t upper:2; + uint64_t reserved:13; + uint64_t io:1; + uint64_t did:5; + uint64_t subdid:3; + uint64_t reserved2:4; + uint64_t endian_swap:2; + uint64_t reserved3:10; + uint64_t bus:8; + uint64_t dev:5; + uint64_t func:3; + uint64_t reg:8; + } s; +}; + +/** + * Return the mapping of PCI device number to IRQ line. Each + * character in the return string represents the interrupt + * line for the device at that position. Device 1 maps to the + * first character, etc. The characters A-D are used for PCI + * interrupts. + * + * Returns PCI interrupt mapping + */ +const char *octeon_get_pci_interrupts(void) +{ + /* + * Returning an empty string causes the interrupts to be + * routed based on the PCI specification. From the PCI spec: + * + * INTA# of Device Number 0 is connected to IRQW on the system + * board. (Device Number has no significance regarding being + * located on the system board or in a connector.) INTA# of + * Device Number 1 is connected to IRQX on the system + * board. INTA# of Device Number 2 is connected to IRQY on the + * system board. INTA# of Device Number 3 is connected to IRQZ + * on the system board. The table below describes how each + * agent's INTx# lines are connected to the system board + * interrupt lines. The following equation can be used to + * determine to which INTx# signal on the system board a given + * device's INTx# line(s) is connected. + * + * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0, + * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I = + * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and + * INTD# = 3) + */ + switch (octeon_bootinfo->board_type) { + case CVMX_BOARD_TYPE_NAO38: + /* This is really the NAC38 */ + return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_THUNDER: + return ""; + case CVMX_BOARD_TYPE_EBH3000: + return ""; + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; + default: + return ""; + } +} + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + int irq_num; + const char *interrupts; + int dev_num; + + /* Get the board specific interrupt mapping */ + interrupts = octeon_get_pci_interrupts(); + + dev_num = dev->devfn >> 3; + if (dev_num < strlen(interrupts)) + irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) + + OCTEON_IRQ_PCI_INT0; + else + irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0; + return irq_num; +} + + +/** + * Read a value from configuration space + * + */ +static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + *val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 2: + *val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64)); + return PCIBIOS_SUCCESSFUL; + case 1: + *val = cvmx_read64_uint8(pci_addr.u64); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +/** + * Write a value to PCI configuration space + * + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns + */ +static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + union octeon_pci_address pci_addr; + + pci_addr.u64 = 0; + pci_addr.s.upper = 2; + pci_addr.s.io = 1; + pci_addr.s.did = 3; + pci_addr.s.subdid = 1; + pci_addr.s.endian_swap = 1; + pci_addr.s.bus = bus->number; + pci_addr.s.dev = devfn >> 3; + pci_addr.s.func = devfn & 0x7; + pci_addr.s.reg = reg; + +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + switch (size) { + case 4: + cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val)); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val)); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_write64_uint8(pci_addr.u64, val); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + + +static struct pci_ops octeon_pci_ops = { + octeon_read_config, + octeon_write_config, +}; + +static struct resource octeon_pci_mem_resource = { + .start = 0, + .end = 0, + .name = "Octeon PCI MEM", + .flags = IORESOURCE_MEM, +}; + +/* + * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI + * bridge + */ +static struct resource octeon_pci_io_resource = { + .start = 0x4000, + .end = OCTEON_PCI_IOSPACE_SIZE - 1, + .name = "Octeon PCI IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pci_controller = { + .pci_ops = &octeon_pci_ops, + .mem_resource = &octeon_pci_mem_resource, + .mem_offset = OCTEON_PCI_MEMSPACE_OFFSET, + .io_resource = &octeon_pci_io_resource, + .io_offset = 0, + .io_map_base = OCTEON_PCI_IOSPACE_BASE, +}; + + +/** + * Low level initialize the Octeon PCI controller + * + * Returns + */ +static void octeon_pci_initialize(void) +{ + union cvmx_pci_cfg01 cfg01; + union cvmx_npi_ctl_status ctl_status; + union cvmx_pci_ctl_status_2 ctl_status_2; + union cvmx_pci_cfg19 cfg19; + union cvmx_pci_cfg16 cfg16; + union cvmx_pci_cfg22 cfg22; + union cvmx_pci_cfg56 cfg56; + + /* Reset the PCI Bus */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Hold PCI reset for 2 ms */ + + ctl_status.u64 = 0; /* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */ + ctl_status.s.max_word = 1; + ctl_status.s.timer = 1; + cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); + + /* Deassert PCI reset and advertize PCX Host Mode Device Capability + (64b) */ + cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); + cvmx_read_csr(CVMX_CIU_SOFT_PRST); + + udelay(2000); /* Wait 2 ms after deasserting PCI reset */ + + ctl_status_2.u32 = 0; + ctl_status_2.s.tsr_hwm = 1; /* Initializes to 0. Must be set + before any PCI reads. */ + ctl_status_2.s.bar2pres = 1; /* Enable BAR2 */ + ctl_status_2.s.bar2_enb = 1; + ctl_status_2.s.bar2_cax = 1; /* Don't use L2 */ + ctl_status_2.s.bar2_esx = 1; + ctl_status_2.s.pmo_amod = 1; /* Round robin priority */ + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* BAR1 hole */ + ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS; + ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ + ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ + ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ + ctl_status_2.s.bb1 = 1; /* BAR1 is big */ + ctl_status_2.s.bb0 = 1; /* BAR0 is big */ + } + + octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); + udelay(2000); /* Wait 2 ms before doing PCI reads */ + + ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2); + pr_notice("PCI Status: %s %s-bit\n", + ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI", + ctl_status_2.s.ap_64ad ? "64" : "32"); + + if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + union cvmx_pci_cnt_reg cnt_reg_start; + union cvmx_pci_cnt_reg cnt_reg_end; + unsigned long cycles, pci_clock; + + cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount(); + udelay(1000); + cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); + cycles = read_c0_cvmcount() - cycles; + pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) / + (cycles / (mips_hpt_frequency / 1000000)); + pr_notice("PCI Clock: %lu MHz\n", pci_clock); + } + + /* + * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 + * in PCI-X mode to allow four oustanding splits. Otherwise, + * should not change from its reset value. Don't write PCI_CFG19 + * in PCI mode (0x82000001 reset value), write it to 0x82000004 + * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. + * MRBCM -> must be one. + */ + if (ctl_status_2.s.ap_pcix) { + cfg19.u32 = 0; + /* + * Target Delayed/Split request outstanding maximum + * count. [1..31] and 0=32. NOTE: If the user + * programs these bits beyond the Designed Maximum + * outstanding count, then the designed maximum table + * depth will be used instead. No additional + * Deferred/Split transactions will be accepted if + * this outstanding maximum count is + * reached. Furthermore, no additional deferred/split + * transactions will be accepted if the I/O delay/ I/O + * Split Request outstanding maximum is reached. + */ + cfg19.s.tdomc = 4; + /* + * Master Deferred Read Request Outstanding Max Count + * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC + * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 + * 5 2 110 6 3 111 7 3 For example, if these bits are + * programmed to 100, the core can support 2 DAC + * cycles, 4 SAC cycles or a combination of 1 DAC and + * 2 SAC cycles. NOTE: For the PCI-X maximum + * outstanding split transactions, refer to + * CRE0[22:20]. + */ + cfg19.s.mdrrmc = 2; + /* + * Master Request (Memory Read) Byte Count/Byte Enable + * select. 0 = Byte Enables valid. In PCI mode, a + * burst transaction cannot be performed using Memory + * Read command=4?h6. 1 = DWORD Byte Count valid + * (default). In PCI Mode, the memory read byte + * enables are automatically generated by the + * core. Note: N3 Master Request transaction sizes are + * always determined through the + * am_attr[<35:32>|<7:0>] field. + */ + cfg19.s.mrbcm = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32); + } + + + cfg01.u32 = 0; + cfg01.s.msae = 1; /* Memory Space Access Enable */ + cfg01.s.me = 1; /* Master Enable */ + cfg01.s.pee = 1; /* PERR# Enable */ + cfg01.s.see = 1; /* System Error Enable */ + cfg01.s.fbbe = 1; /* Fast Back to Back Transaction Enable */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + +#ifdef USE_OCTEON_INTERNAL_ARBITER + /* + * When OCTEON is a PCI host, most systems will use OCTEON's + * internal arbiter, so must enable it before any PCI/PCI-X + * traffic can occur. + */ + { + union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg; + + pci_int_arb_cfg.u64 = 0; + pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ + cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); + } +#endif /* USE_OCTEON_INTERNAL_ARBITER */ + + /* + * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, + * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to + * 1..7. + */ + cfg16.u32 = 0; + cfg16.s.mltd = 1; /* Master Latency Timer Disable */ + octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32); + + /* + * Should be written to 0x4ff00. MTTV -> must be zero. + * FLUSH -> must be 1. MRV -> should be 0xFF. + */ + cfg22.u32 = 0; + /* Master Retry Value [1..255] and 0=infinite */ + cfg22.s.mrv = 0xff; + /* + * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper + * N3K operation. + */ + cfg22.s.flush = 1; + octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32); + + /* + * MOST Indicates the maximum number of outstanding splits (in -1 + * notation) when OCTEON is in PCI-X mode. PCI-X performance is + * affected by the MOST selection. Should generally be written + * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807, + * depending on the desired MOST of 3, 2, 1, or 0, respectively. + */ + cfg56.u32 = 0; + cfg56.s.pxcid = 7; /* RO - PCI-X Capability ID */ + cfg56.s.ncp = 0xe8; /* RO - Next Capability Pointer */ + cfg56.s.dpere = 1; /* Data Parity Error Recovery Enable */ + cfg56.s.roe = 1; /* Relaxed Ordering Enable */ + cfg56.s.mmbc = 1; /* Maximum Memory Byte Count + [0=512B,1=1024B,2=2048B,3=4096B] */ + cfg56.s.most = 3; /* Maximum outstanding Split transactions [0=1 + .. 7=32] */ + + octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32); + + /* + * Affects PCI performance when OCTEON services reads to its + * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are + * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and + * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, + * these values need to be changed so they won't possibly prefetch off + * of the end of memory if PCI is DMAing a buffer at the end of + * memory. Note that these values differ from their reset values. + */ + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31); + octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31); +} + + +/** + * Initialize the Octeon PCI controller + * + * Returns + */ +static int __init octeon_pci_setup(void) +{ + union cvmx_npi_mem_access_subidx mem_access; + int index; + + /* Only these chips have PCI */ + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCI version of it */ + octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq; + + /* Only use the big bars on chips that support it */ + if (OCTEON_IS_MODEL(OCTEON_CN31XX) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || + OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL; + else + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; + + /* PCI I/O and PCI MEM values */ + set_io_port_base(OCTEON_PCI_IOSPACE_BASE); + ioport_resource.start = 0; + ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; + if (!octeon_is_pci_host()) { + pr_notice("Not in host mode, PCI Controller not initialized\n"); + return 0; + } + + pr_notice("%s Octeon big bar support\n", + (octeon_dma_bar_type == + OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); + + octeon_pci_initialize(); + + mem_access.u64 = 0; + mem_access.s.esr = 1; /* Endian-Swap on read. */ + mem_access.s.esw = 1; /* Endian-Swap on write. */ + mem_access.s.nsr = 0; /* No-Snoop on read. */ + mem_access.s.nsw = 0; /* No-Snoop on write. */ + mem_access.s.ror = 0; /* Relax Read on read. */ + mem_access.s.row = 0; /* Relax Order on write. */ + mem_access.s.ba = 0; /* PCI Address bits [63:36]. */ + cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64); + + /* + * Remap the Octeon BAR 2 above all 32 bit devices + * (0x8000000000ul). This is done here so it is remapped + * before the readl()'s below. We don't want BAR2 overlapping + * with BAR0/BAR1 during these reads. + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80); + + /* Disable the BAR1 movable mappings */ + for (index = 0; index < 32; index++) + octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { + /* Remap the Octeon BAR 0 to 0-2GB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* + * Remap the Octeon BAR 1 to map 2GB-4GB (minus the + * BAR 1 hole). + */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR1 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } else { + /* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */ + octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20); + octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); + + /* Remap the Octeon BAR 1 to map 0-128MB */ + octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0); + octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); + + /* Devices go after BAR0 */ + octeon_pci_mem_resource.start = + OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) + + (4ul << 10); + octeon_pci_mem_resource.end = + octeon_pci_mem_resource.start + (1ul << 30); + } + + register_pci_controller(&octeon_pci_controller); + + /* + * Clear any errors that might be pending from before the bus + * was setup properly. + */ + cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1); + return 0; +} + +arch_initcall(octeon_pci_setup); diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/cavium-octeon/pcie.c new file mode 100644 index 00000000000..49d14081b3b --- /dev/null +++ b/arch/mips/cavium-octeon/pcie.c @@ -0,0 +1,1370 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007, 2008 Cavium Networks + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "pci-common.h" + +union cvmx_pcie_address { + uint64_t u64; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 1 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t reserved_29_31:3; /* Must be zero */ + /* + * Selects the type of the configuration request (0 = type 0, + * 1 = type 1). + */ + uint64_t ty:1; + /* Target bus number sent in the ID in the request. */ + uint64_t bus:8; + /* + * Target device number sent in the ID in the + * request. Note that Dev must be zero for type 0 + * configuration requests. + */ + uint64_t dev:5; + /* Target function number sent in the ID in the request. */ + uint64_t func:3; + /* + * Selects a register in the configuration space of + * the target. + */ + uint64_t reg:12; + } config; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 2 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t es:2; /* Endian swap = 1 */ + uint64_t port:2; /* PCIe port 0,1 */ + uint64_t address:32; /* PCIe IO address */ + } io; + struct { + uint64_t upper:2; /* Normally 2 for XKPHYS */ + uint64_t reserved_49_61:13; /* Must be zero */ + uint64_t io:1; /* 1 for IO space access */ + uint64_t did:5; /* PCIe DID = 3 */ + uint64_t subdid:3; /* PCIe SubDID = 3-6 */ + uint64_t reserved_36_39:4; /* Must be zero */ + uint64_t address:36; /* PCIe Mem address */ + } mem; +}; + +/** + * Return the Core virtual base address for PCIe IO access. IOs are + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.io.upper = 0; + pcie_addr.io.io = 1; + pcie_addr.io.did = 3; + pcie_addr.io.subdid = 2; + pcie_addr.io.es = 1; + pcie_addr.io.port = pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the IO address region returned at address + * cvmx_pcie_get_io_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the IO window + */ +static inline uint64_t cvmx_pcie_get_io_size(int pcie_port) +{ + return 1ull << 32; +} + +/** + * Return the Core virtual base address for PCIe MEM access. Memory is + * read/written as an offset from this address. + * + * @pcie_port: PCIe port the IO is for + * + * Returns 64bit Octeon IO base address for read/write + */ +static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) +{ + union cvmx_pcie_address pcie_addr; + pcie_addr.u64 = 0; + pcie_addr.mem.upper = 0; + pcie_addr.mem.io = 1; + pcie_addr.mem.did = 3; + pcie_addr.mem.subdid = 3 + pcie_port; + return pcie_addr.u64; +} + +/** + * Size of the Mem address region returned at address + * cvmx_pcie_get_mem_base_address() + * + * @pcie_port: PCIe port the IO is for + * + * Returns Size of the Mem window + */ +static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) +{ + return 1ull << 36; +} + +/** + * Read a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to read from + * @cfg_offset: Address to read + * + * Returns Value read + */ +static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) +{ + union cvmx_pescx_cfg_rd pescx_cfg_rd; + pescx_cfg_rd.u64 = 0; + pescx_cfg_rd.s.addr = cfg_offset; + cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); + pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); + return pescx_cfg_rd.s.data; +} + +/** + * Write a PCIe config space register indirectly. This is used for + * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. + * + * @pcie_port: PCIe port to write to + * @cfg_offset: Address to write + * @val: Value to write + */ +static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, + uint32_t val) +{ + union cvmx_pescx_cfg_wr pescx_cfg_wr; + pescx_cfg_wr.u64 = 0; + pescx_cfg_wr.s.addr = cfg_offset; + pescx_cfg_wr.s.data = val; + cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); +} + +/** + * Build a PCIe config space request address for a device + * + * @pcie_port: PCIe port to access + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns 64bit Octeon IO address + */ +static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, + int dev, int fn, int reg) +{ + union cvmx_pcie_address pcie_addr; + union cvmx_pciercx_cfg006 pciercx_cfg006; + + pciercx_cfg006.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); + if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) + return 0; + + pcie_addr.u64 = 0; + pcie_addr.config.upper = 2; + pcie_addr.config.io = 1; + pcie_addr.config.did = 3; + pcie_addr.config.subdid = 1; + pcie_addr.config.es = 1; + pcie_addr.config.port = pcie_port; + pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); + pcie_addr.config.bus = bus; + pcie_addr.config.dev = dev; + pcie_addr.config.func = fn; + pcie_addr.config.reg = reg; + return pcie_addr.u64; +} + +/** + * Read 8bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return cvmx_read64_uint8(address); + else + return 0xff; +} + +/** + * Read 16bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le16_to_cpu(cvmx_read64_uint16(address)); + else + return 0xffff; +} + +/** + * Read 32bits from a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * + * Returns Result of the read + */ +static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, + int fn, int reg) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + return le32_to_cpu(cvmx_read64_uint32(address)); + else + return 0xffffffff; +} + +/** + * Write 8bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, + int reg, uint8_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint8(address, val); +} + +/** + * Write 16bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, + int reg, uint16_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint16(address, cpu_to_le16(val)); +} + +/** + * Write 32bits to a Device's config space + * + * @pcie_port: PCIe port the device is on + * @bus: Sub bus + * @dev: Device ID + * @fn: Device sub function + * @reg: Register to access + * @val: Value to write + */ +static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, + int reg, uint32_t val) +{ + uint64_t address = + __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); + if (address) + cvmx_write64_uint32(address, cpu_to_le32(val)); +} + +/** + * Initialize the RC config space CSRs + * + * @pcie_port: PCIe port to initialize + */ +static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) +{ + union cvmx_pciercx_cfg030 pciercx_cfg030; + union cvmx_npei_ctl_status2 npei_ctl_status2; + union cvmx_pciercx_cfg070 pciercx_cfg070; + union cvmx_pciercx_cfg001 pciercx_cfg001; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg006 pciercx_cfg006; + union cvmx_pciercx_cfg008 pciercx_cfg008; + union cvmx_pciercx_cfg009 pciercx_cfg009; + union cvmx_pciercx_cfg010 pciercx_cfg010; + union cvmx_pciercx_cfg011 pciercx_cfg011; + union cvmx_pciercx_cfg035 pciercx_cfg035; + union cvmx_pciercx_cfg075 pciercx_cfg075; + union cvmx_pciercx_cfg034 pciercx_cfg034; + + /* Max Payload Size (PCIE*_CFG030[MPS]) */ + /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ + /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ + /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ + pciercx_cfg030.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); + /* + * Max payload size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mps = 0; + /* + * Max read request size = 128 bytes for best Octeon DMA + * performance. + */ + pciercx_cfg030.s.mrrs = 0; + /* Enable relaxed ordering. */ + pciercx_cfg030.s.ro_en = 1; + /* Enable no snoop. */ + pciercx_cfg030.s.ns_en = 1; + /* Correctable error reporting enable. */ + pciercx_cfg030.s.ce_en = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg030.s.nfe_en = 1; + /* Fatal error reporting enable. */ + pciercx_cfg030.s.fe_en = 1; + /* Unsupported request reporting enable. */ + pciercx_cfg030.s.ur_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), + pciercx_cfg030.u32); + + /* + * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match + * PCIE*_CFG030[MPS] + * + * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not + * exceed PCIE*_CFG030[MRRS]. + */ + npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); + /* Max payload size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mps = 0; + /* Max read request size = 128 bytes for best Octeon DMA performance */ + npei_ctl_status2.s.mrrs = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); + + /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ + pciercx_cfg070.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); + pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ + pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), + pciercx_cfg070.u32); + + /* + * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should + * always be set. + * + * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error + * Message Enable (PCIE*_CFG001[SEE]) + */ + pciercx_cfg001.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); + pciercx_cfg001.s.msae = 1; /* Memory space enable. */ + pciercx_cfg001.s.me = 1; /* Bus master enable. */ + pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ + pciercx_cfg001.s.see = 1; /* SERR# enable */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), + pciercx_cfg001.u32); + + /* Advanced Error Recovery Message Enables */ + /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); + /* Use CVMX_PCIERCX_CFG067 hardware default */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); + + /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); + pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), + pciercx_cfg032.u32); + + /* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */ + + /* + * Link Width Mode (PCIERCn_CFG452[LME]) - Set during + * cvmx_pcie_rc_initialize_link() + * + * Primary Bus Number (PCIERCn_CFG006[PBNUM]) + * + * We set the primary bus number to 1 so IDT bridges are + * happy. They don't like zero. + */ + pciercx_cfg006.u32 = 0; + pciercx_cfg006.s.pbnum = 1; + pciercx_cfg006.s.sbnum = 1; + pciercx_cfg006.s.subbnum = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), + pciercx_cfg006.u32); + + /* + * Memory-mapped I/O BAR (PCIERCn_CFG008) + * Most applications should disable the memory-mapped I/O BAR by + * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] + */ + pciercx_cfg008.u32 = 0; + pciercx_cfg008.s.mb_addr = 0x100; + pciercx_cfg008.s.ml_addr = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), + pciercx_cfg008.u32); + + /* + * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) + * Most applications should disable the prefetchable BAR by setting + * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < + * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] + */ + pciercx_cfg009.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); + pciercx_cfg010.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); + pciercx_cfg011.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); + pciercx_cfg009.s.lmem_base = 0x100; + pciercx_cfg009.s.lmem_limit = 0; + pciercx_cfg010.s.umem_base = 0x100; + pciercx_cfg011.s.umem_limit = 0; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), + pciercx_cfg009.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), + pciercx_cfg010.u32); + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), + pciercx_cfg011.u32); + + /* + * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) + * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) + */ + pciercx_cfg035.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); + /* System error on correctable error enable. */ + pciercx_cfg035.s.secee = 1; + /* System error on fatal error enable. */ + pciercx_cfg035.s.sefee = 1; + /* System error on non-fatal error enable. */ + pciercx_cfg035.s.senfee = 1; + /* PME interrupt enable. */ + pciercx_cfg035.s.pmeie = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), + pciercx_cfg035.u32); + + /* + * Advanced Error Recovery Interrupt Enables + * (PCIERCn_CFG075[CERE,NFERE,FERE]) + */ + pciercx_cfg075.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); + /* Correctable error reporting enable. */ + pciercx_cfg075.s.cere = 1; + /* Non-fatal error reporting enable. */ + pciercx_cfg075.s.nfere = 1; + /* Fatal error reporting enable. */ + pciercx_cfg075.s.fere = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), + pciercx_cfg075.u32); + + /* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], + * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) + */ + pciercx_cfg034.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); + /* Hot-plug interrupt enable. */ + pciercx_cfg034.s.hpint_en = 1; + /* Data Link Layer state changed enable */ + pciercx_cfg034.s.dlls_en = 1; + /* Command completed interrupt enable. */ + pciercx_cfg034.s.ccint_en = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), + pciercx_cfg034.u32); +} + +/** + * Initialize a host mode PCIe link. This function takes a PCIe + * port from reset to a link up state. Software can then begin + * configuring the rest of the link. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int __cvmx_pcie_rc_initialize_link(int pcie_port) +{ + uint64_t start_cycle; + union cvmx_pescx_ctl_status pescx_ctl_status; + union cvmx_pciercx_cfg452 pciercx_cfg452; + union cvmx_pciercx_cfg032 pciercx_cfg032; + union cvmx_pciercx_cfg448 pciercx_cfg448; + + /* Set the lane width */ + pciercx_cfg452.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + if (pescx_ctl_status.s.qlm_cfg == 0) { + /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ + pciercx_cfg452.s.lme = 0xf; + } else { + /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ + pciercx_cfg452.s.lme = 0x7; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), + pciercx_cfg452.u32); + + /* + * CN52XX pass 1.x has an errata where length mismatches on UR + * responses can cause bus errors on 64bit memory + * reads. Turning off length error checking fixes this. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + union cvmx_pciercx_cfg455 pciercx_cfg455; + pciercx_cfg455.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG455(pcie_port)); + pciercx_cfg455.s.m_cpl_len_err = 1; + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), + pciercx_cfg455.u32); + } + + /* Lane swap needs to be manually enabled for CN52XX */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { + pescx_ctl_status.s.lane_swp = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), + pescx_ctl_status.u64); + } + + /* Bring up the link */ + pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); + pescx_ctl_status.s.lnk_enb = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); + + /* + * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); + + /* Wait for the link to come up */ + cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port); + start_cycle = cvmx_get_cycle(); + do { + if (cvmx_get_cycle() - start_cycle > + 2 * cvmx_sysinfo_get()->cpu_clock_hz) { + cvmx_dprintf("PCIe: Port %d link timeout\n", + pcie_port); + return -1; + } + cvmx_wait(10000); + pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, + CVMX_PCIERCX_CFG032(pcie_port)); + } while (pciercx_cfg032.s.dlla == 0); + + /* Display the link status */ + cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, + pciercx_cfg032.s.nlw); + + /* + * Update the Replay Time Limit. Empirically, some PCIe + * devices take a little longer to respond than expected under + * load. As a workaround for this we configure the Replay Time + * Limit to the value expected for a 512 byte MPS instead of + * our actual 256 byte MPS. The numbers below are directly + * from the PCIe spec table 3-4. + */ + pciercx_cfg448.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); + switch (pciercx_cfg032.s.nlw) { + case 1: /* 1 lane */ + pciercx_cfg448.s.rtl = 1677; + break; + case 2: /* 2 lanes */ + pciercx_cfg448.s.rtl = 867; + break; + case 4: /* 4 lanes */ + pciercx_cfg448.s.rtl = 462; + break; + case 8: /* 8 lanes */ + pciercx_cfg448.s.rtl = 258; + break; + } + cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), + pciercx_cfg448.u32); + + return 0; +} + +/** + * Initialize a PCIe port for use in host(RC) mode. It doesn't + * enumerate the bus. + * + * @pcie_port: PCIe port to initialize + * + * Returns Zero on success + */ +static int cvmx_pcie_rc_initialize(int pcie_port) +{ + int i; + union cvmx_ciu_soft_prst ciu_soft_prst; + union cvmx_pescx_bist_status pescx_bist_status; + union cvmx_pescx_bist_status2 pescx_bist_status2; + union cvmx_npei_ctl_status npei_ctl_status; + union cvmx_npei_mem_access_ctl npei_mem_access_ctl; + union cvmx_npei_mem_access_subidx mem_access_subid; + union cvmx_npei_dbg_data npei_dbg_data; + union cvmx_pescx_ctl_status2 pescx_ctl_status2; + + /* + * Make sure we aren't trying to setup a target mode interface + * in host mode. + */ + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called " + "on port0, but port0 is not in host mode\n"); + return -1; + } + + /* + * Make sure a CN52XX isn't trying to bring up port 1 when it + * is disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { + cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() " + "called on port1, but port1 is " + "disabled\n"); + return -1; + } + } + + /* + * PCIe switch arbitration mode. '0' == fixed priority NPEI, + * PCIe0, then PCIe1. '1' == round robin. + */ + npei_ctl_status.s.arb = 1; + /* Allow up to 0x20 config retries */ + npei_ctl_status.s.cfg_rtry = 0x20; + /* + * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS + * don't reset. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + npei_ctl_status.s.p0_ntags = 0x20; + npei_ctl_status.s.p1_ntags = 0x20; + } + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); + + /* Bring the PCIe out of reset */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { + /* + * The EBH5200 board swapped the PCIe reset lines on + * the board. As a workaround for this bug, we bring + * both PCIe ports out of reset at the same time + * instead of on separate calls. So for port 0, we + * bring both out of reset and do nothing on port 1. + */ + if (pcie_port == 0) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is + * trying to init it again without a proper + * PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the ports */ + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + ciu_soft_prst.u64 = + cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 1; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } else { + /* + * The normal case: The PCIe ports are completely + * separate and can be brought out of reset + * independently. + */ + if (pcie_port) + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + else + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + /* + * After a chip reset the PCIe will also be in + * reset. If it isn't, most likely someone is trying + * to init it again without a proper PCIe reset. + */ + if (ciu_soft_prst.s.soft_prst == 0) { + /* Reset the port */ + ciu_soft_prst.s.soft_prst = 1; + if (pcie_port) + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, + ciu_soft_prst.u64); + else + cvmx_write_csr(CVMX_CIU_SOFT_PRST, + ciu_soft_prst.u64); + /* Wait until pcie resets the ports. */ + udelay(2000); + } + if (pcie_port) { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); + } else { + ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); + ciu_soft_prst.s.soft_prst = 0; + cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); + } + } + + /* + * Wait for PCIe reset to complete. Due to errata PCIE-700, we + * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a + * fixed number of cycles. + */ + cvmx_wait(400000); + + /* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and + CN52XX, so we only probe it on newer chips */ + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* Clear PCLK_RUN so we can check if the clock is running */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + pescx_ctl_status2.s.pclk_run = 1; + cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), + pescx_ctl_status2.u64); + /* + * Now that we cleared PCLK_RUN, wait for it to be set + * again telling us the clock is running. + */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), + union cvmx_pescx_ctl_status2, + pclk_run, ==, 1, 10000)) { + cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", + pcie_port); + return -1; + } + } + + /* + * Check and make sure PCIe came out of reset. If it doesn't + * the board probably hasn't wired the clocks up and the + * interface should be skipped. + */ + pescx_ctl_status2.u64 = + cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); + if (pescx_ctl_status2.s.pcierst) { + cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", + pcie_port); + return -1; + } + + /* + * Check BIST2 status. If any bits are set skip this interface. This + * is an attempt to catch PCIE-813 on pass 1 parts. + */ + pescx_bist_status2.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); + if (pescx_bist_status2.u64) { + cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this " + "port isn't hooked up, skipping.\n", + pcie_port); + return -1; + } + + /* Check BIST status */ + pescx_bist_status.u64 = + cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); + if (pescx_bist_status.u64) + cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", + pcie_port, CAST64(pescx_bist_status.u64)); + + /* Initialize the config space CSRs */ + __cvmx_pcie_rc_initialize_config_space(pcie_port); + + /* Bring the link up */ + if (__cvmx_pcie_rc_initialize_link(pcie_port)) { + cvmx_dprintf + ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n"); + return -1; + } + + /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ + npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); + /* Allow 16 words to combine */ + npei_mem_access_ctl.s.max_word = 0; + /* Wait up to 127 cycles for more data */ + npei_mem_access_ctl.s.timer = 127; + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); + + /* Setup Mem access SubDIDs */ + mem_access_subid.u64 = 0; + /* Port the request is sent to. */ + mem_access_subid.s.port = pcie_port; + /* Due to an errata on pass 1 chips, no merging is allowed. */ + mem_access_subid.s.nmerge = 1; + /* Endian-swap for Reads. */ + mem_access_subid.s.esr = 1; + /* Endian-swap for Writes. */ + mem_access_subid.s.esw = 1; + /* No Snoop for Reads. */ + mem_access_subid.s.nsr = 1; + /* No Snoop for Writes. */ + mem_access_subid.s.nsw = 1; + /* Disable Relaxed Ordering for Reads. */ + mem_access_subid.s.ror = 0; + /* Disable Relaxed Ordering for Writes. */ + mem_access_subid.s.row = 0; + /* PCIe Adddress Bits <63:34>. */ + mem_access_subid.s.ba = 0; + + /* + * Setup mem access 12-15 for port 0, 16-19 for port 1, + * supplying 36 bits of address space. + */ + for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { + cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), + mem_access_subid.u64); + /* Set each SUBID to extend the addressable range */ + mem_access_subid.s.ba += 1; + } + + /* + * Disable the peer to peer forwarding register. This must be + * setup by the OS after it enumerates the bus and assigns + * addresses to the PCIe busses. + */ + for (i = 0; i < 4; i++) { + cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); + cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); + } + + /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); + + /* + * Disable Octeon's BAR1. It isn't needed in RC mode since + * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into + * the 2nd 256MB of memory. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); + + /* + * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take + * precedence where they overlap. It also overlaps with the + * device addresses, so make sure the peer to peer forwarding + * is set right. + */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); + + /* + * Setup BAR2 attributes + * + * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) + * - PTLP_RO,CTLP_RO should normally be set (except for debug). + * - WAIT_COM=0 will likely work for all applications. + * + * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). + */ + if (pcie_port) { + union cvmx_npei_ctl_port1 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); + } else { + union cvmx_npei_ctl_port0 npei_ctl_port; + npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); + npei_ctl_port.s.bar2_enb = 1; + npei_ctl_port.s.bar2_esx = 1; + npei_ctl_port.s.bar2_cax = 0; + npei_ctl_port.s.ptlp_ro = 1; + npei_ctl_port.s.ctlp_ro = 1; + npei_ctl_port.s.wait_com = 0; + npei_ctl_port.s.waitl_com = 0; + cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); + } + return 0; +} + + +/* Above was cvmx-pcie.c, below original pcie.c */ + + +/** + * Map a PCI device to the appropriate interrupt line + * + * @param dev The Linux PCI device structure for the device to map + * @param slot The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @param pin The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * @return Interrupt number for the device + */ +int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, + u8 slot, u8 pin) +{ + /* + * The EBH5600 board with the PCI to PCIe bridge mistakenly + * wires the first slot for both device id 2 and interrupt + * A. According to the PCI spec, device id 2 should be C. The + * following kludge attempts to fix this. + */ + if (strstr(octeon_board_type_string(), "EBH5600") && + dev->bus && dev->bus->parent) { + /* + * Iterate all the way up the device chain and find + * the root bus. + */ + while (dev->bus && dev->bus->parent) + dev = to_pci_dev(dev->bus->bridge); + /* If the root bus is number 0 and the PEX 8114 is the + * root, assume we are behind the miswired bus. We + * need to correct the swizzle level by two. Yuck. + */ + if ((dev->bus->number == 0) && + (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { + /* + * The pin field is one based, not zero. We + * need to swizzle it by minus two. + */ + pin = ((pin - 3) & 3) + 1; + } + } + /* + * The -1 is because pin starts with one, not zero. It might + * be that this equation needs to include the slot number, but + * I don't have hardware to check that against. + */ + return pin - 1 + OCTEON_IRQ_PCI_INT0; +} + +/** + * Read a value from configuration space + * + * @param bus + * @param devfn + * @param reg + * @param size + * @param val + * @return + */ +static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, int size, + u32 *val) +{ + union octeon_cvmemctl cvmmemctl; + union octeon_cvmemctl cvmmemctl_save; + int bus_number = bus->number; + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * buses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + /* + * PCIe only has a single device connected to Octeon. It is + * always device ID 0. Don't bother doing reads for other + * device IDs on the first segment. + */ + if ((bus_number == 0) && (devfn >> 3 != 0)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + + /* + * The following is a workaround for the CN57XX, CN56XX, + * CN55XX, and CN54XX errata with PCIe config reads from non + * existent devices. These chips will hang the PCIe link if a + * config read is performed that causes a UR response. + */ + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { + /* + * For our EBH5600 board, port 0 has a bridge with two + * PCI-X slots. We need a new special checks to make + * sure we only probe valid stuff. The PCIe->PCI-X + * bridge only respondes to device ID 0, function + * 0-1 + */ + if ((bus_number == 0) && (devfn >= 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + /* + * The PCI-X slots are device ID 2,3. Choose one of + * the below "if" blocks based on what is plugged into + * the board. + */ +#if 1 + /* Use this option if you aren't using either slot */ + if (bus_number == 1) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the first slot but + * not the second. + */ + if ((bus_number == 1) && (devfn >> 3 != 2)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* + * Use this option if you are using the second slot + * but not the first. + */ + if ((bus_number == 1) && (devfn >> 3 != 3)) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#elif 0 + /* Use this opion if you are using both slots */ + if ((bus_number == 1) && + !((devfn == (2 << 3)) || (devfn == (3 << 3)))) + return PCIBIOS_FUNC_NOT_SUPPORTED; +#endif + + /* + * Shorten the DID timeout so bus errors for PCIe + * config reads from non existent devices happen + * faster. This allows us to continue booting even if + * the above "if" checks are wrong. Once one of these + * errors happens, the PCIe port is dead. + */ + cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); + cvmmemctl.u64 = cvmmemctl_save.u64; + cvmmemctl.s.didtto = 2; + __write_64bit_c0_register($11, 7, cvmmemctl.u64); + } + + switch (size) { + case 4: + *val = cvmx_pcie_config_read32(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 2: + *val = cvmx_pcie_config_read16(pcie_port, bus_number, + devfn >> 3, devfn & 0x7, reg); + break; + case 1: + *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg); + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) + __write_64bit_c0_register($11, 7, cvmmemctl_save.u64); + return PCIBIOS_SUCCESSFUL; +} + +static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + return octeon_pcie_read_config(1, bus, devfn, reg, size, val); +} + + + +/** + * Write a value to PCI configuration space + * + * @param bus + * @param devfn + * @param reg + * @param size + * @param val + * @return + */ +static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, + unsigned int devfn, int reg, + int size, u32 val) +{ + int bus_number = bus->number; + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + switch (size) { + case 4: + cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 2: + cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + case 1: + cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, + devfn & 0x7, reg, val); + return PCIBIOS_SUCCESSFUL; + } +#if PCI_CONFIG_SPACE_DELAY + udelay(PCI_CONFIG_SPACE_DELAY); +#endif + return PCIBIOS_FUNC_NOT_SUPPORTED; +} + +static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(0, bus, devfn, reg, size, val); +} + +static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + return octeon_pcie_write_config(1, bus, devfn, reg, size, val); +} + +static struct pci_ops octeon_pcie0_ops = { + octeon_pcie0_read_config, + octeon_pcie0_write_config, +}; + +static struct resource octeon_pcie0_mem_resource = { + .name = "Octeon PCIe0 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie0_io_resource = { + .name = "Octeon PCIe0 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie0_controller = { + .pci_ops = &octeon_pcie0_ops, + .mem_resource = &octeon_pcie0_mem_resource, + .io_resource = &octeon_pcie0_io_resource, +}; + +static struct pci_ops octeon_pcie1_ops = { + octeon_pcie1_read_config, + octeon_pcie1_write_config, +}; + +static struct resource octeon_pcie1_mem_resource = { + .name = "Octeon PCIe1 MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource octeon_pcie1_io_resource = { + .name = "Octeon PCIe1 IO", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller octeon_pcie1_controller = { + .pci_ops = &octeon_pcie1_ops, + .mem_resource = &octeon_pcie1_mem_resource, + .io_resource = &octeon_pcie1_io_resource, +}; + + +/** + * Initialize the Octeon PCIe controllers + * + * @return + */ +static int __init octeon_pcie_setup(void) +{ + union cvmx_npei_ctl_status npei_ctl_status; + int result; + + /* These chips don't have PCIe */ + if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) + return 0; + + /* Point pcibios_map_irq() to the PCIe version of it */ + octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; + + /* Use the PCIe based DMA mappings */ + octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; + + /* + * PCIe I/O range. It is based on port 0 but includes up until + * port 1's end. + */ + set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); + ioport_resource.start = 0; + ioport_resource.end = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; + + npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); + if (npei_ctl_status.s.host_mode) { + pr_notice("PCIe: Initializing port 0\n"); + result = cvmx_pcie_rc_initialize(0); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie0_controller.mem_offset = + cvmx_pcie_get_mem_base_address(0); + /* IO offsets are Mips virtual addresses */ + octeon_pcie0_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address + (0)); + octeon_pcie0_controller.io_offset = 0; + /* + * To keep things similar to PCI, we start + * device addresses at the same place as PCI + * uisng big bar support. This normally + * translates to 4GB-256MB, which is the same + * as most x86 PCs. + */ + octeon_pcie0_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(0) + + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie0_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(0) + + cvmx_pcie_get_mem_size(0) - 1; + /* + * Ports must be above 16KB for the ISA bus + * filtering in the PCI-X to PCI bridge. + */ + octeon_pcie0_controller.io_resource->start = 4 << 10; + octeon_pcie0_controller.io_resource->end = + cvmx_pcie_get_io_size(0) - 1; + register_pci_controller(&octeon_pcie0_controller); + } + } else { + pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); + } + + /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + union cvmx_npei_dbg_data npei_dbg_data; + npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); + if (npei_dbg_data.cn52xx.qlm0_link_width) + return 0; + } + + pr_notice("PCIe: Initializing port 1\n"); + result = cvmx_pcie_rc_initialize(1); + if (result == 0) { + /* Memory offsets are physical addresses */ + octeon_pcie1_controller.mem_offset = + cvmx_pcie_get_mem_base_address(1); + /* IO offsets are Mips virtual addresses */ + octeon_pcie1_controller.io_map_base = + CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1)); + octeon_pcie1_controller.io_offset = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + /* + * To keep things similar to PCI, we start device + * addresses at the same place as PCI uisng big bar + * support. This normally translates to 4GB-256MB, + * which is the same as most x86 PCs. + */ + octeon_pcie1_controller.mem_resource->start = + cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - + (OCTEON_PCI_BAR1_HOLE_SIZE << 20); + octeon_pcie1_controller.mem_resource->end = + cvmx_pcie_get_mem_base_address(1) + + cvmx_pcie_get_mem_size(1) - 1; + /* + * Ports must be above 16KB for the ISA bus filtering + * in the PCI-X to PCI bridge. + */ + octeon_pcie1_controller.io_resource->start = + cvmx_pcie_get_io_base_address(1) - + cvmx_pcie_get_io_base_address(0); + octeon_pcie1_controller.io_resource->end = + octeon_pcie1_controller.io_resource->start + + cvmx_pcie_get_io_size(1) - 1; + register_pci_controller(&octeon_pcie1_controller); + } + return 0; +} + +arch_initcall(octeon_pcie_setup); diff --git a/arch/mips/include/asm/octeon/cvmx-helper-errata.h b/arch/mips/include/asm/octeon/cvmx-helper-errata.h new file mode 100644 index 00000000000..5fc99189ff5 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-helper-errata.h @@ -0,0 +1,33 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_HELPER_ERRATA_H__ +#define __CVMX_HELPER_ERRATA_H__ + +extern void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm); + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-helper-jtag.h b/arch/mips/include/asm/octeon/cvmx-helper-jtag.h new file mode 100644 index 00000000000..29f016ddb89 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-helper-jtag.h @@ -0,0 +1,43 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * @file + * + * Helper utilities for qlm_jtag. + * + */ + +#ifndef __CVMX_HELPER_JTAG_H__ +#define __CVMX_HELPER_JTAG_H__ + +extern void cvmx_helper_qlm_jtag_init(void); +extern uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data); +extern void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits); +extern void cvmx_helper_qlm_jtag_update(int qlm); + +#endif /* __CVMX_HELPER_JTAG_H__ */ diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index 03fddfa3e92..e31e3fe14f8 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -375,6 +375,18 @@ static inline uint64_t cvmx_get_cycle(void) return cycle; } +/** + * Wait for the specified number of cycle + * + */ +static inline void cvmx_wait(uint64_t cycles) +{ + uint64_t done = cvmx_get_cycle() + cycles; + + while (cvmx_get_cycle() < done) + ; /* Spin */ +} + /** * Reads a chip global cycle counter. This counts CPU cycles since * chip reset. The counter is 64 bit. diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index edc676084cd..cac9b1a206f 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -245,4 +245,6 @@ static inline uint32_t octeon_npi_read32(uint64_t address) return cvmx_read64_uint32(address ^ 4); } +extern struct cvmx_bootinfo *octeon_bootinfo; + #endif /* __ASM_OCTEON_OCTEON_H */