From: Linus Torvalds Date: Wed, 1 Apr 2009 16:47:12 +0000 (-0700) Subject: Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes... X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e76e5b2c663ac74ae6a542ac20795c625e36a5cd;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt --- e76e5b2c663ac74ae6a542ac20795c625e36a5cd diff --cc Documentation/feature-removal-schedule.txt index ea7d1bdad34d,8851eea06a02..d0f354670646 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@@ -376,19 -346,34 +376,51 @@@ Why: See commits 129f8ae9b1b5be94517da7 cause the thermal throttling not to happen at the right time. Who: Dave Jones , Matthew Garrett +----------------------------- + +What: __do_IRQ all in one fits nothing interrupt handler +When: 2.6.32 +Why: __do_IRQ was kept for easy migration to the type flow handlers. + More than two years of migration time is enough. +Who: Thomas Gleixner + +----------------------------- + +What: obsolete generic irq defines and typedefs +When: 2.6.30 +Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) + have been kept around for migration reasons. After more than two years + it's time to remove them finally +Who: Thomas Gleixner ++ + --------------------------- + + What: fakephp and associated sysfs files in /sys/bus/pci/slots/ + When: 2011 + Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to + represent a machine's physical PCI slots. The change in semantics + had userspace implications, as the hotplug core no longer allowed + drivers to create multiple sysfs files per physical slot (required + for multi-function devices, e.g.). fakephp was seen as a developer's + tool only, and its interface changed. Too late, we learned that + there were some users of the fakephp interface. + + In 2.6.30, the original fakephp interface was restored. At the same + time, the PCI core gained the ability that fakephp provided, namely + function-level hot-remove and hot-add. + + Since the PCI core now provides the same functionality, exposed in: + + /sys/bus/pci/rescan + /sys/bus/pci/devices/.../remove + /sys/bus/pci/devices/.../rescan + + there is no functional reason to maintain fakephp as well. + + We will keep the existing module so that 'modprobe fakephp' will + present the old /sys/bus/pci/slots/... interface for compatibility, + but users are urged to migrate their applications to the API above. + + After a reasonable transition period, we will remove the legacy + fakephp interface. + Who: Alex Chiang diff --cc arch/x86/kernel/apic/io_apic.c index da99ffcdfde6,000000000000..1bb5c6cee3eb mode 100644,000000..100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@@ -1,4152 -1,0 +1,4156 @@@ +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku and + * Hidemi Kishimoto , + * further tested and cleaned up by Zach Brown + * and Ingo Molnar + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* time_after() */ +#ifdef CONFIG_ACPI +#include +#endif +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define __apicdebuginit(type) static type __init + +/* + * Is the SiS APIC rmw bug present ? + * -1 = don't know, 0 = no, 1 = yes + */ +int sis_apic_bug = -1; + +static DEFINE_SPINLOCK(ioapic_lock); +static DEFINE_SPINLOCK(vector_lock); + +/* + * # of IRQ routing registers + */ +int nr_ioapic_registers[MAX_IO_APICS]; + +/* I/O APIC entries */ +struct mpc_ioapic mp_ioapics[MAX_IO_APICS]; +int nr_ioapics; + +/* MP IRQ source entries */ +struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + +int skip_ioapic_setup; + +void arch_disable_smp_support(void) +{ +#ifdef CONFIG_PCI + noioapicquirk = 1; + noioapicreroute = -1; +#endif + skip_ioapic_setup = 1; +} + +static int __init parse_noapic(char *str) +{ + /* disable IO-APIC */ + arch_disable_smp_support(); + return 0; +} +early_param("noapic", parse_noapic); + +struct irq_pin_list; + +/* + * This is performance-critical, we want to do it O(1) + * + * the indexing order of this array favors 1:1 mappings + * between pins and IRQs. + */ + +struct irq_pin_list { + int apic, pin; + struct irq_pin_list *next; +}; + +static struct irq_pin_list *get_one_free_irq_2_pin(int cpu) +{ + struct irq_pin_list *pin; + int node; + + node = cpu_to_node(cpu); + + pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node); + + return pin; +} + +struct irq_cfg { + struct irq_pin_list *irq_2_pin; + cpumask_var_t domain; + cpumask_var_t old_domain; + unsigned move_cleanup_count; + u8 vector; + u8 move_in_progress : 1; +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC + u8 move_desc_pending : 1; +#endif +}; + +/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ +#ifdef CONFIG_SPARSE_IRQ +static struct irq_cfg irq_cfgx[] = { +#else +static struct irq_cfg irq_cfgx[NR_IRQS] = { +#endif + [0] = { .vector = IRQ0_VECTOR, }, + [1] = { .vector = IRQ1_VECTOR, }, + [2] = { .vector = IRQ2_VECTOR, }, + [3] = { .vector = IRQ3_VECTOR, }, + [4] = { .vector = IRQ4_VECTOR, }, + [5] = { .vector = IRQ5_VECTOR, }, + [6] = { .vector = IRQ6_VECTOR, }, + [7] = { .vector = IRQ7_VECTOR, }, + [8] = { .vector = IRQ8_VECTOR, }, + [9] = { .vector = IRQ9_VECTOR, }, + [10] = { .vector = IRQ10_VECTOR, }, + [11] = { .vector = IRQ11_VECTOR, }, + [12] = { .vector = IRQ12_VECTOR, }, + [13] = { .vector = IRQ13_VECTOR, }, + [14] = { .vector = IRQ14_VECTOR, }, + [15] = { .vector = IRQ15_VECTOR, }, +}; + +int __init arch_early_irq_init(void) +{ + struct irq_cfg *cfg; + struct irq_desc *desc; + int count; + int i; + + cfg = irq_cfgx; + count = ARRAY_SIZE(irq_cfgx); + + for (i = 0; i < count; i++) { + desc = irq_to_desc(i); + desc->chip_data = &cfg[i]; + alloc_bootmem_cpumask_var(&cfg[i].domain); + alloc_bootmem_cpumask_var(&cfg[i].old_domain); + if (i < NR_IRQS_LEGACY) + cpumask_setall(cfg[i].domain); + } + + return 0; +} + +#ifdef CONFIG_SPARSE_IRQ +static struct irq_cfg *irq_cfg(unsigned int irq) +{ + struct irq_cfg *cfg = NULL; + struct irq_desc *desc; + + desc = irq_to_desc(irq); + if (desc) + cfg = desc->chip_data; + + return cfg; +} + +static struct irq_cfg *get_one_free_irq_cfg(int cpu) +{ + struct irq_cfg *cfg; + int node; + + node = cpu_to_node(cpu); + + cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node); + if (cfg) { + if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) { + kfree(cfg); + cfg = NULL; + } else if (!alloc_cpumask_var_node(&cfg->old_domain, + GFP_ATOMIC, node)) { + free_cpumask_var(cfg->domain); + kfree(cfg); + cfg = NULL; + } else { + cpumask_clear(cfg->domain); + cpumask_clear(cfg->old_domain); + } + } + + return cfg; +} + +int arch_init_chip_data(struct irq_desc *desc, int cpu) +{ + struct irq_cfg *cfg; + + cfg = desc->chip_data; + if (!cfg) { + desc->chip_data = get_one_free_irq_cfg(cpu); + if (!desc->chip_data) { + printk(KERN_ERR "can not alloc irq_cfg\n"); + BUG_ON(1); + } + } + + return 0; +} + +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC + +static void +init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) +{ + struct irq_pin_list *old_entry, *head, *tail, *entry; + + cfg->irq_2_pin = NULL; + old_entry = old_cfg->irq_2_pin; + if (!old_entry) + return; + + entry = get_one_free_irq_2_pin(cpu); + if (!entry) + return; + + entry->apic = old_entry->apic; + entry->pin = old_entry->pin; + head = entry; + tail = entry; + old_entry = old_entry->next; + while (old_entry) { + entry = get_one_free_irq_2_pin(cpu); + if (!entry) { + entry = head; + while (entry) { + head = entry->next; + kfree(entry); + entry = head; + } + /* still use the old one */ + return; + } + entry->apic = old_entry->apic; + entry->pin = old_entry->pin; + tail->next = entry; + tail = entry; + old_entry = old_entry->next; + } + + tail->next = NULL; + cfg->irq_2_pin = head; +} + +static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg) +{ + struct irq_pin_list *entry, *next; + + if (old_cfg->irq_2_pin == cfg->irq_2_pin) + return; + + entry = old_cfg->irq_2_pin; + + while (entry) { + next = entry->next; + kfree(entry); + entry = next; + } + old_cfg->irq_2_pin = NULL; +} + +void arch_init_copy_chip_data(struct irq_desc *old_desc, + struct irq_desc *desc, int cpu) +{ + struct irq_cfg *cfg; + struct irq_cfg *old_cfg; + + cfg = get_one_free_irq_cfg(cpu); + + if (!cfg) + return; + + desc->chip_data = cfg; + + old_cfg = old_desc->chip_data; + + memcpy(cfg, old_cfg, sizeof(struct irq_cfg)); + + init_copy_irq_2_pin(old_cfg, cfg, cpu); +} + +static void free_irq_cfg(struct irq_cfg *old_cfg) +{ + kfree(old_cfg); +} + +void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc) +{ + struct irq_cfg *old_cfg, *cfg; + + old_cfg = old_desc->chip_data; + cfg = desc->chip_data; + + if (old_cfg == cfg) + return; + + if (old_cfg) { + free_irq_2_pin(old_cfg, cfg); + free_irq_cfg(old_cfg); + old_desc->chip_data = NULL; + } +} + +static void +set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg = desc->chip_data; + + if (!cfg->move_in_progress) { + /* it means that domain is not changed */ + if (!cpumask_intersects(desc->affinity, mask)) + cfg->move_desc_pending = 1; + } +} +#endif + +#else +static struct irq_cfg *irq_cfg(unsigned int irq) +{ + return irq < nr_irqs ? irq_cfgx + irq : NULL; +} + +#endif + +#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC +static inline void +set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) +{ +} +#endif + +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; + unsigned int unused2[11]; + unsigned int eoi; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mp_ioapics[idx].apicaddr & ~PAGE_MASK); +} + +static inline void io_apic_eoi(unsigned int apic, unsigned int vector) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(vector, &io_apic->eoi); +} + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + * + * Older SiS APIC requires we rewrite the index register + */ +static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + + if (sis_apic_bug) + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +static bool io_apic_level_ack_pending(struct irq_cfg *cfg) +{ + struct irq_pin_list *entry; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + entry = cfg->irq_2_pin; + for (;;) { + unsigned int reg; + int pin; + + if (!entry) + break; + pin = entry->pin; + reg = io_apic_read(entry->apic, 0x10 + pin*2); + /* Is the remote IRR bit set? */ + if (reg & IO_APIC_REDIR_REMOTE_IRR) { + spin_unlock_irqrestore(&ioapic_lock, flags); + return true; + } + if (!entry->next) + break; + entry = entry->next; + } + spin_unlock_irqrestore(&ioapic_lock, flags); + + return false; +} + +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ +static void +__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + union entry_union eu; + eu.entry = e; + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); +} + +void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, e); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +#ifdef CONFIG_SMP +static void send_cleanup_vector(struct irq_cfg *cfg) +{ + cpumask_var_t cleanup_mask; + + if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { + unsigned int i; + cfg->move_cleanup_count = 0; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + cfg->move_cleanup_count++; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); + } else { + cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); + cfg->move_cleanup_count = cpumask_weight(cleanup_mask); + apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + free_cpumask_var(cleanup_mask); + } + cfg->move_in_progress = 0; +} + +static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + u8 vector = cfg->vector; + + entry = cfg->irq_2_pin; + for (;;) { + unsigned int reg; + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); + reg = io_apic_read(apic, 0x10 + pin*2); + reg &= ~IO_APIC_REDIR_VECTOR_MASK; + reg |= vector; + io_apic_modify(apic, 0x10 + pin*2, reg); + if (!entry->next) + break; + entry = entry->next; + } +} + +static int +assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask); + +/* + * Either sets desc->affinity to a valid value, and returns + * ->cpu_mask_to_apicid of that, or returns BAD_APICID and + * leaves desc->affinity untouched. + */ +static unsigned int +set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned int irq; + + if (!cpumask_intersects(mask, cpu_online_mask)) + return BAD_APICID; + + irq = desc->irq; + cfg = desc->chip_data; + if (assign_irq_vector(irq, cfg, mask)) + return BAD_APICID; + + /* check that before desc->addinity get updated */ + set_extra_move_desc(desc, mask); + + cpumask_copy(desc->affinity, mask); + + return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); +} + +static void +set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int dest; + unsigned int irq; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + dest = set_desc_affinity(desc, mask); + if (dest != BAD_APICID) { + /* Only the high 8 bits are valid. */ + dest = SET_APIC_LOGICAL_ID(dest); + __target_IO_APIC_irq(irq, dest, cfg); + } + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void +set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + set_ioapic_affinity_irq_desc(desc, mask); +} +#endif /* CONFIG_SMP */ + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) +{ + struct irq_pin_list *entry; + + entry = cfg->irq_2_pin; + if (!entry) { + entry = get_one_free_irq_2_pin(cpu); + if (!entry) { + printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n", + apic, pin); + return; + } + cfg->irq_2_pin = entry; + entry->apic = apic; + entry->pin = pin; + return; + } + + while (entry->next) { + /* not again, please */ + if (entry->apic == apic && entry->pin == pin) + return; + + entry = entry->next; + } + + entry->next = get_one_free_irq_2_pin(cpu); + entry = entry->next; + entry->apic = apic; + entry->pin = pin; +} + +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = cfg->irq_2_pin; + int replaced = 0; + + while (entry) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + replaced = 1; + /* every one is different, right? */ + break; + } + entry = entry->next; + } + + /* why? call replace before add? */ + if (!replaced) + add_pin_to_irq_cpu(cfg, cpu, newapic, newpin); +} + +static inline void io_apic_modify_irq(struct irq_cfg *cfg, + int mask_and, int mask_or, + void (*final)(struct irq_pin_list *entry)) +{ + int pin; + struct irq_pin_list *entry; + + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + unsigned int reg; + pin = entry->pin; + reg = io_apic_read(entry->apic, 0x10 + pin * 2); + reg &= mask_and; + reg |= mask_or; + io_apic_modify(entry->apic, 0x10 + pin * 2, reg); + if (final) + final(entry); + } +} + +static void __unmask_IO_APIC_irq(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); +} + +#ifdef CONFIG_X86_64 +static void io_apic_sync(struct irq_pin_list *entry) +{ + /* + * Synchronize the IO-APIC and the CPU by doing + * a dummy read from the IO-APIC + */ + struct io_apic __iomem *io_apic; + io_apic = io_apic_base(entry->apic); + readl(&io_apic->data); +} + +static void __mask_IO_APIC_irq(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); +} +#else /* CONFIG_X86_32 */ +static void __mask_IO_APIC_irq(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL); +} + +static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED, NULL); +} + +static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER, NULL); +} +#endif /* CONFIG_X86_32 */ + +static void mask_IO_APIC_irq_desc(struct irq_desc *desc) +{ + struct irq_cfg *cfg = desc->chip_data; + unsigned long flags; + + BUG_ON(!cfg); + + spin_lock_irqsave(&ioapic_lock, flags); + __mask_IO_APIC_irq(cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void unmask_IO_APIC_irq_desc(struct irq_desc *desc) +{ + struct irq_cfg *cfg = desc->chip_data; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __unmask_IO_APIC_irq(cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void mask_IO_APIC_irq(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + + mask_IO_APIC_irq_desc(desc); +} +static void unmask_IO_APIC_irq(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + + unmask_IO_APIC_irq_desc(desc); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + entry = ioapic_read_entry(apic, pin); + if (entry.delivery_mode == dest_SMI) + return; + /* + * Disable it in the IO-APIC irq-routing table: + */ + ioapic_mask_entry(apic, pin); +} + +static void clear_IO_APIC (void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + clear_IO_APIC_pin(apic, pin); +} + +#ifdef CONFIG_X86_32 +/* + * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to + * specific CPU-side IRQs. + */ + +#define MAX_PIRQS 8 +static int pirq_entries[MAX_PIRQS] = { + [0 ... MAX_PIRQS - 1] = -1 +}; + +static int __init ioapic_pirq_setup(char *str) +{ + int i, max; + int ints[MAX_PIRQS+1]; + + get_options(str, ARRAY_SIZE(ints), ints); + + apic_printk(APIC_VERBOSE, KERN_INFO + "PIRQ redirection, working around broken MP-BIOS.\n"); + max = MAX_PIRQS; + if (ints[0] < MAX_PIRQS) + max = ints[0]; + + for (i = 0; i < max; i++) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); + /* + * PIRQs are mapped upside down, usually. + */ + pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; + } + return 1; +} + +__setup("pirq=", ioapic_pirq_setup); +#endif /* CONFIG_X86_32 */ + +#ifdef CONFIG_INTR_REMAP +/* I/O APIC RTE contents at the OS boot up */ +static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; + +/* + * Saves all the IO-APIC RTE's + */ +int save_IO_APIC_setup(void) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + int apic, pin; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + + for (apic = 0; apic < nr_ioapics; apic++) { + early_ioapic_entries[apic] = + kzalloc(sizeof(struct IO_APIC_route_entry) * + nr_ioapic_registers[apic], GFP_KERNEL); + if (!early_ioapic_entries[apic]) + goto nomem; + } + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + early_ioapic_entries[apic][pin] = + ioapic_read_entry(apic, pin); + + return 0; + +nomem: + while (apic >= 0) + kfree(early_ioapic_entries[apic--]); + memset(early_ioapic_entries, 0, + ARRAY_SIZE(early_ioapic_entries)); + + return -ENOMEM; +} + +void mask_IO_APIC_setup(void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) { + if (!early_ioapic_entries[apic]) + break; + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + + entry = early_ioapic_entries[apic][pin]; + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + } + } + } +} + +void restore_IO_APIC_setup(void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) { + if (!early_ioapic_entries[apic]) + break; + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + ioapic_write_entry(apic, pin, + early_ioapic_entries[apic][pin]); + kfree(early_ioapic_entries[apic]); + early_ioapic_entries[apic] = NULL; + } +} + +void reinit_intr_remapped_IO_APIC(int intr_remapping) +{ + /* + * for now plain restore of previous settings. + * TBD: In the case of OS enabling interrupt-remapping, + * IO-APIC RTE's need to be setup to point to interrupt-remapping + * table entries. for now, do a plain restore, and wait for + * the setup_IO_APIC_irqs() to do proper initialization. + */ + restore_IO_APIC_setup(); +} +#endif + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int apic, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].irqtype == type && + (mp_irqs[i].dstapic == mp_ioapics[apic].apicid || + mp_irqs[i].dstapic == MP_APIC_ALL) && + mp_irqs[i].dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + + return mp_irqs[i].dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic) + return apic; + } + } + + return -1; +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +static int pin_2_irq(int idx, int apic, int pin); + +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (test_bit(bus, mp_bus_not_pci)) { + apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) + break; + + if (!test_bit(lbus, mp_bus_not_pci) && + !mp_irqs[i].irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].srcbusirq & 3)) + return irq; + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) + best_guess = irq; + } + } + return best_guess; +} + +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + +#if defined(CONFIG_EISA) || defined(CONFIG_MCA) +/* + * EISA Edge/Level control register, ELCR + */ +static int EISA_ELCR(unsigned int irq) +{ + if (irq < NR_IRQS_LEGACY) { + unsigned int port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; + } + apic_printk(APIC_VERBOSE, KERN_INFO + "Broken MPtable reports ISA irq %d\n", irq); + return 0; +} + +#endif + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) + +/* EISA interrupts are always polarity zero and can be edge or level + * trigger depending on the ELCR value. If an interrupt is listed as + * EISA conforming in the MP table, that means its trigger type must + * be read in from the ELCR */ + +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) +#define default_EISA_polarity(idx) default_ISA_polarity(idx) + +/* PCI interrupts are always polarity one level triggered, + * when listed as conforming in the MP table. */ + +#define default_PCI_trigger(idx) (1) +#define default_PCI_polarity(idx) (1) + +/* MCA interrupts are always polarity zero level triggered, + * when listed as conforming in the MP table. */ + +#define default_MCA_trigger(idx) (1) +#define default_MCA_polarity(idx) default_ISA_polarity(idx) + +static int MPBIOS_polarity(int idx) +{ + int bus = mp_irqs[idx].srcbus; + int polarity; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].irqflag & 3) + { + case 0: /* conforms, ie. bus-type dependent polarity */ + if (test_bit(bus, mp_bus_not_pci)) + polarity = default_ISA_polarity(idx); + else + polarity = default_PCI_polarity(idx); + break; + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + return polarity; +} + +static int MPBIOS_trigger(int idx) +{ + int bus = mp_irqs[idx].srcbus; + int trigger; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch ((mp_irqs[idx].irqflag>>2) & 3) + { + case 0: /* conforms, ie. bus-type dependent */ + if (test_bit(bus, mp_bus_not_pci)) + trigger = default_ISA_trigger(idx); + else + trigger = default_PCI_trigger(idx); +#if defined(CONFIG_EISA) || defined(CONFIG_MCA) + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + trigger = default_EISA_trigger(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + /* set before the switch */ + break; + } + case MP_BUS_MCA: /* MCA pin */ + { + trigger = default_MCA_trigger(idx); + break; + } + default: + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + } +#endif + break; + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } + return trigger; +} + +static inline int irq_polarity(int idx) +{ + return MPBIOS_polarity(idx); +} + +static inline int irq_trigger(int idx) +{ + return MPBIOS_trigger(idx); +} + +int (*ioapic_renumber_irq)(int ioapic, int irq); +static int pin_2_irq(int idx, int apic, int pin) +{ + int irq, i; + int bus = mp_irqs[idx].srcbus; + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].dstirq != pin) + printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); + + if (test_bit(bus, mp_bus_not_pci)) { + irq = mp_irqs[idx].srcbusirq; + } else { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + /* + * For MPS mode, so far only needed by ES7000 platform + */ + if (ioapic_renumber_irq) + irq = ioapic_renumber_irq(apic, irq); + } + +#ifdef CONFIG_X86_32 + /* + * PCI IRQ command line redirection. Yes, limits are hardcoded. + */ + if ((pin >= 16) && (pin <= 23)) { + if (pirq_entries[pin-16] != -1) { + if (!pirq_entries[pin-16]) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "disabling PIRQ%d\n", pin-16); + } else { + irq = pirq_entries[pin-16]; + apic_printk(APIC_VERBOSE, KERN_DEBUG + "using PIRQ%d -> IRQ %d\n", + pin-16, irq); + } + } + } +#endif + + return irq; +} + +void lock_vector_lock(void) +{ + /* Used to the online set of cpus does not change + * during assign_irq_vector. + */ + spin_lock(&vector_lock); +} + +void unlock_vector_lock(void) +{ + spin_unlock(&vector_lock); +} + +static int +__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) +{ + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + unsigned int old_vector; + int cpu, err; + cpumask_var_t tmp_mask; + + if ((cfg->move_in_progress) || cfg->move_cleanup_count) + return -EBUSY; + + if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC)) + return -ENOMEM; + + old_vector = cfg->vector; + if (old_vector) { + cpumask_and(tmp_mask, mask, cpu_online_mask); + cpumask_and(tmp_mask, cfg->domain, tmp_mask); + if (!cpumask_empty(tmp_mask)) { + free_cpumask_var(tmp_mask); + return 0; + } + } + + /* Only try and allocate irqs on cpus that are present */ + err = -ENOSPC; + for_each_cpu_and(cpu, mask, cpu_online_mask) { + int new_cpu; + int vector, offset; + + apic->vector_allocation_domain(cpu, tmp_mask); + + vector = current_vector; + offset = current_offset; +next: + vector += 8; + if (vector >= first_system_vector) { + /* If out of vectors on large boxen, must share them. */ + offset = (offset + 1) % 8; + vector = FIRST_DEVICE_VECTOR + offset; + } + if (unlikely(current_vector == vector)) + continue; + + if (test_bit(vector, used_vectors)) + goto next; + + for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) + if (per_cpu(vector_irq, new_cpu)[vector] != -1) + goto next; + /* Found one! */ + current_vector = vector; + current_offset = offset; + if (old_vector) { + cfg->move_in_progress = 1; + cpumask_copy(cfg->old_domain, cfg->domain); + } + for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) + per_cpu(vector_irq, new_cpu)[vector] = irq; + cfg->vector = vector; + cpumask_copy(cfg->domain, tmp_mask); + err = 0; + break; + } + free_cpumask_var(tmp_mask); + return err; +} + +static int +assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) +{ + int err; + unsigned long flags; + + spin_lock_irqsave(&vector_lock, flags); + err = __assign_irq_vector(irq, cfg, mask); + spin_unlock_irqrestore(&vector_lock, flags); + return err; +} + +static void __clear_irq_vector(int irq, struct irq_cfg *cfg) +{ + int cpu, vector; + + BUG_ON(!cfg->vector); + + vector = cfg->vector; + for_each_cpu_and(cpu, cfg->domain, cpu_online_mask) + per_cpu(vector_irq, cpu)[vector] = -1; + + cfg->vector = 0; + cpumask_clear(cfg->domain); + + if (likely(!cfg->move_in_progress)) + return; + for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) { + for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; + vector++) { + if (per_cpu(vector_irq, cpu)[vector] != irq) + continue; + per_cpu(vector_irq, cpu)[vector] = -1; + break; + } + } + cfg->move_in_progress = 0; +} + +void __setup_vector_irq(int cpu) +{ + /* Initialize vector_irq on a new cpu */ + /* This function must be called with vector_lock held */ + int irq, vector; + struct irq_cfg *cfg; + struct irq_desc *desc; + + /* Mark the inuse vectors */ + for_each_irq_desc(irq, desc) { + cfg = desc->chip_data; + if (!cpumask_test_cpu(cpu, cfg->domain)) + continue; + vector = cfg->vector; + per_cpu(vector_irq, cpu)[vector] = irq; + } + /* Mark the free vectors */ + for (vector = 0; vector < NR_VECTORS; ++vector) { + irq = per_cpu(vector_irq, cpu)[vector]; + if (irq < 0) + continue; + + cfg = irq_cfg(irq); + if (!cpumask_test_cpu(cpu, cfg->domain)) + per_cpu(vector_irq, cpu)[vector] = -1; + } +} + +static struct irq_chip ioapic_chip; +static struct irq_chip ir_ioapic_chip; + +#define IOAPIC_AUTO -1 +#define IOAPIC_EDGE 0 +#define IOAPIC_LEVEL 1 + +#ifdef CONFIG_X86_32 +static inline int IO_APIC_irq_trigger(int irq) +{ + int apic, idx, pin; + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) + return irq_trigger(idx); + } + } + /* + * nonexistent IRQs are edge default + */ + return 0; +} +#else +static inline int IO_APIC_irq_trigger(int irq) +{ + return 1; +} +#endif + +static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long trigger) +{ + + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) + desc->status |= IRQ_LEVEL; + else + desc->status &= ~IRQ_LEVEL; + + if (irq_remapped(irq)) { + desc->status |= IRQ_MOVE_PCNTXT; + if (trigger) + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_edge_irq, "edge"); + return; + } + + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_edge_irq, "edge"); +} + +int setup_ioapic_entry(int apic_id, int irq, + struct IO_APIC_route_entry *entry, + unsigned int destination, int trigger, + int polarity, int vector, int pin) +{ + /* + * add it to the IO-APIC irq-routing table: + */ + memset(entry,0,sizeof(*entry)); + + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_ioapic_to_ir(apic_id); + struct irte irte; + struct IR_IO_APIC_route_entry *ir_entry = + (struct IR_IO_APIC_route_entry *) entry; + int index; + + if (!iommu) + panic("No mapping iommu for ioapic %d\n", apic_id); + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + panic("Failed to allocate IRTE for ioapic %d\n", apic_id); + + memset(&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = apic->irq_dest_mode; + /* + * Trigger mode in the IRTE will always be edge, and the + * actual level or edge trigger will be setup in the IO-APIC + * RTE. This will help simplify level triggered irq migration. + * For more details, see the comments above explainig IO-APIC + * irq migration in the presence of interrupt-remapping. + */ + irte.trigger_mode = 0; + irte.dlvry_mode = apic->irq_delivery_mode; + irte.vector = vector; + irte.dest_id = IRTE_DEST(destination); + + modify_irte(irq, &irte); + + ir_entry->index2 = (index >> 15) & 0x1; + ir_entry->zero = 0; + ir_entry->format = 1; + ir_entry->index = (index & 0x7fff); + /* + * IO-APIC RTE will be configured with virtual vector. + * irq handler will do the explicit EOI to the io-apic. + */ + ir_entry->vector = pin; + } else { + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->dest = destination; + entry->vector = vector; + } + + entry->mask = 0; /* enable IRQ */ + entry->trigger = trigger; + entry->polarity = polarity; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry->mask = 1; + return 0; +} + +static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq_desc *desc, + int trigger, int polarity) +{ + struct irq_cfg *cfg; + struct IO_APIC_route_entry entry; + unsigned int dest; + + if (!IO_APIC_IRQ(irq)) + return; + + cfg = desc->chip_data; + + if (assign_irq_vector(irq, cfg, apic->target_cpus())) + return; + + dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus()); + + apic_printk(APIC_VERBOSE,KERN_DEBUG + "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " + "IRQ %d Mode:%i Active:%i)\n", + apic_id, mp_ioapics[apic_id].apicid, pin, cfg->vector, + irq, trigger, polarity); + + + if (setup_ioapic_entry(mp_ioapics[apic_id].apicid, irq, &entry, + dest, trigger, polarity, cfg->vector, pin)) { + printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mp_ioapics[apic_id].apicid, pin); + __clear_irq_vector(irq, cfg); + return; + } + + ioapic_register_intr(irq, desc, trigger); + if (irq < NR_IRQS_LEGACY) + disable_8259A_irq(irq); + + ioapic_write_entry(apic_id, pin, entry); +} + +static void __init setup_IO_APIC_irqs(void) +{ + int apic_id, pin, idx, irq; + int notcon = 0; + struct irq_desc *desc; + struct irq_cfg *cfg; + int cpu = boot_cpu_id; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { + for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { + + idx = find_irq_entry(apic_id, pin, mp_INT); + if (idx == -1) { + if (!notcon) { + notcon = 1; + apic_printk(APIC_VERBOSE, + KERN_DEBUG " %d-%d", + mp_ioapics[apic_id].apicid, pin); + } else + apic_printk(APIC_VERBOSE, " %d-%d", + mp_ioapics[apic_id].apicid, pin); + continue; + } + if (notcon) { + apic_printk(APIC_VERBOSE, + " (apicid-pin) not connected\n"); + notcon = 0; + } + + irq = pin_2_irq(idx, apic_id, pin); + + /* + * Skip the timer IRQ if there's a quirk handler + * installed and if it returns 1: + */ + if (apic->multi_timer_check && + apic->multi_timer_check(apic_id, irq)) + continue; + + desc = irq_to_desc_alloc_cpu(irq, cpu); + if (!desc) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; + } + cfg = desc->chip_data; + add_pin_to_irq_cpu(cfg, cpu, apic_id, pin); + + setup_IO_APIC_irq(apic_id, pin, irq, desc, + irq_trigger(idx), irq_polarity(idx)); + } + } + + if (notcon) + apic_printk(APIC_VERBOSE, + " (apicid-pin) not connected\n"); +} + +/* + * Set up the timer pin, possibly with the 8259A-master behind. + */ +static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin, + int vector) +{ + struct IO_APIC_route_entry entry; + + if (intr_remapping_enabled) + return; + + memset(&entry, 0, sizeof(entry)); + + /* + * We use logical delivery to get the timer IRQ + * to the first CPU. + */ + entry.dest_mode = apic->irq_dest_mode; + entry.mask = 0; /* don't mask IRQ for edge */ + entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus()); + entry.delivery_mode = apic->irq_delivery_mode; + entry.polarity = 0; + entry.trigger = 0; + entry.vector = vector; + + /* + * The timer IRQ doesn't have to know that behind the + * scene we may have a 8259A-master in AEOI mode ... + */ + set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(apic_id, pin, entry); +} + + +__apicdebuginit(void) print_IO_APIC(void) +{ + int apic, i; + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + union IO_APIC_reg_03 reg_03; + unsigned long flags; + struct irq_cfg *cfg; + struct irq_desc *desc; + unsigned int irq; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for (i = 0; i < nr_ioapics; i++) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mp_ioapics[i].apicid, nr_ioapic_registers[i]); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + reg_01.raw = io_apic_read(apic, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(apic, 2); + if (reg_01.bits.version >= 0x20) + reg_03.raw = io_apic_read(apic, 3); + spin_unlock_irqrestore(&ioapic_lock, flags); + + printk("\n"); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); + printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); + + printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); + printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); + + /* + * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, + * but the value of reg_02 is read as the previous read register + * value, so ignore it if reg_02 == reg_01. + */ + if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + } + + /* + * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 + * or reg_03, but the value of reg_0[23] is read as the previous read + * register value, so ignore it if reg_03 == reg_0[12]. + */ + if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && + reg_03.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); + printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); + + for (i = 0; i <= reg_01.bits.entries; i++) { + struct IO_APIC_route_entry entry; + + entry = ioapic_read_entry(apic, i); + + printk(KERN_DEBUG " %02x %03X ", + i, + entry.dest + ); + + printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", + entry.mask, + entry.trigger, + entry.irr, + entry.polarity, + entry.delivery_status, + entry.dest_mode, + entry.delivery_mode, + entry.vector + ); + } + } + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for_each_irq_desc(irq, desc) { + struct irq_pin_list *entry; + + cfg = desc->chip_data; + entry = cfg->irq_2_pin; + if (!entry) + continue; + printk(KERN_DEBUG "IRQ%d ", irq); + for (;;) { + printk("-> %d:%d", entry->apic, entry->pin); + if (!entry->next) + break; + entry = entry->next; + } + printk("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); + + return; +} + +__apicdebuginit(void) print_APIC_bitfield(int base) +{ + unsigned int v; + int i, j; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); + for (i = 0; i < 8; i++) { + v = apic_read(base + i*0x10); + for (j = 0; j < 32; j++) { + if (v & (1< 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + + v = apic_read(APIC_ESR); + printk(KERN_DEBUG "... APIC ESR: %08x\n", v); + } + + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32)); + + v = apic_read(APIC_LVTT); + printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); + + if (maxlvt > 3) { /* PC is LVT#4. */ + v = apic_read(APIC_LVTPC); + printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); + } + v = apic_read(APIC_LVT0); + printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); + v = apic_read(APIC_LVT1); + printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); + + if (maxlvt > 2) { /* ERR is LVT#3. */ + v = apic_read(APIC_LVTERR); + printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); + } + + v = apic_read(APIC_TMICT); + printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); + v = apic_read(APIC_TMCCT); + printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); + v = apic_read(APIC_TDCR); + printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + printk("\n"); +} + +__apicdebuginit(void) print_all_local_APICs(void) +{ + int cpu; + + preempt_disable(); + for_each_online_cpu(cpu) + smp_call_function_single(cpu, print_local_APIC, NULL, 1); + preempt_enable(); +} + +__apicdebuginit(void) print_PIC(void) +{ + unsigned int v; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "\nprinting PIC contents\n"); + + spin_lock_irqsave(&i8259A_lock, flags); + + v = inb(0xa1) << 8 | inb(0x21); + printk(KERN_DEBUG "... PIC IMR: %04x\n", v); + + v = inb(0xa0) << 8 | inb(0x20); + printk(KERN_DEBUG "... PIC IRR: %04x\n", v); + + outb(0x0b,0xa0); + outb(0x0b,0x20); + v = inb(0xa0) << 8 | inb(0x20); + outb(0x0a,0xa0); + outb(0x0a,0x20); + + spin_unlock_irqrestore(&i8259A_lock, flags); + + printk(KERN_DEBUG "... PIC ISR: %04x\n", v); + + v = inb(0x4d1) << 8 | inb(0x4d0); + printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); +} + +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +void __init enable_IO_APIC(void) +{ + union IO_APIC_reg_01 reg_01; + int i8259_apic, i8259_pin; + int apic; + unsigned long flags; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + entry = ioapic_read_entry(apic, pin); + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ + /* + * Clear the IO-APIC before rebooting: + */ + clear_IO_APIC(); + + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + * + * With interrupt-remapping, for now we will use virtual wire A mode, + * as virtual wire B is little complex (need to configure both + * IOAPIC RTE aswell as interrupt-remapping table entry). + * As this gets called during crash dump, keep this simple for now. + */ + if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) { + struct IO_APIC_route_entry entry; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ + entry.vector = 0; + entry.dest = read_apic_id(); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); + } + + /* + * Use virtual wire A mode when interrupt remapping is enabled. + */ + disconnect_bsp_APIC(!intr_remapping_enabled && ioapic_i8259.pin != -1); +} + +#ifdef CONFIG_X86_32 +/* + * function to set the IO-APIC physical IDs based on the + * values stored in the MPC table. + * + * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 + */ + +static void __init setup_ioapic_ids_from_mpc(void) +{ + union IO_APIC_reg_00 reg_00; + physid_mask_t phys_id_present_map; + int apic_id; + int i; + unsigned char old_id; + unsigned long flags; + + if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) + return; + + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + /* + * This is broken; anything with a real cpu count has to + * circumvent this idiocy regardless. + */ + phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map); + + /* + * Set the IOAPIC ID to the value stored in the MPC table. + */ + for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { + + /* Read the register 0 value */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic_id, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + old_id = mp_ioapics[apic_id].apicid; + + if (mp_ioapics[apic_id].apicid >= get_physical_broadcast()) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", + apic_id, mp_ioapics[apic_id].apicid); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + reg_00.bits.ID); + mp_ioapics[apic_id].apicid = reg_00.bits.ID; + } + + /* + * Sanity check, is the ID really free? Every APIC in a + * system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(phys_id_present_map, + mp_ioapics[apic_id].apicid)) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", + apic_id, mp_ioapics[apic_id].apicid); + for (i = 0; i < get_physical_broadcast(); i++) + if (!physid_isset(i, phys_id_present_map)) + break; + if (i >= get_physical_broadcast()) + panic("Max APIC ID exceeded!\n"); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + i); + physid_set(i, phys_id_present_map); + mp_ioapics[apic_id].apicid = i; + } else { + physid_mask_t tmp; + tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid); + apic_printk(APIC_VERBOSE, "Setting %d in the " + "phys_id_present_map\n", + mp_ioapics[apic_id].apicid); + physids_or(phys_id_present_map, phys_id_present_map, tmp); + } + + + /* + * We need to adjust the IRQ routing table + * if the ID changed. + */ + if (old_id != mp_ioapics[apic_id].apicid) + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].dstapic == old_id) + mp_irqs[i].dstapic + = mp_ioapics[apic_id].apicid; + + /* + * Read the right value from the MPC table and + * write it into the ID register. + */ + apic_printk(APIC_VERBOSE, KERN_INFO + "...changing IO-APIC physical APIC ID to %d ...", + mp_ioapics[apic_id].apicid); + + reg_00.bits.ID = mp_ioapics[apic_id].apicid; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic_id, 0, reg_00.raw); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* + * Sanity check + */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic_id, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + if (reg_00.bits.ID != mp_ioapics[apic_id].apicid) + printk("could not set ID!\n"); + else + apic_printk(APIC_VERBOSE, " ok.\n"); + } +} +#endif + +int no_timer_check __initdata; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + unsigned long flags; + + if (no_timer_check) + return 1; + + local_save_flags(flags); + local_irq_enable(); + /* Let ten ticks pass... */ + mdelay((10 * 1000) / HZ); + local_irq_restore(flags); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + + /* jiffies wrap? */ + if (time_after(jiffies, t1 + 4)) + return 1; + return 0; +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + */ + +static unsigned int startup_ioapic_irq(unsigned int irq) +{ + int was_pending = 0; + unsigned long flags; + struct irq_cfg *cfg; + + spin_lock_irqsave(&ioapic_lock, flags); + if (irq < NR_IRQS_LEGACY) { + disable_8259A_irq(irq); + if (i8259A_irq_pending(irq)) + was_pending = 1; + } + cfg = irq_cfg(irq); + __unmask_IO_APIC_irq(cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +#ifdef CONFIG_X86_64 +static int ioapic_retrigger_irq(unsigned int irq) +{ + + struct irq_cfg *cfg = irq_cfg(irq); + unsigned long flags; + + spin_lock_irqsave(&vector_lock, flags); + apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector); + spin_unlock_irqrestore(&vector_lock, flags); + + return 1; +} +#else +static int ioapic_retrigger_irq(unsigned int irq) +{ + apic->send_IPI_self(irq_cfg(irq)->vector); + + return 1; +} +#endif + +/* + * Level and edge triggered IO-APIC interrupts need different handling, + * so we use two separate IRQ descriptors. Edge triggered IRQs can be + * handled with the level-triggered descriptor, but that one has slightly + * more overhead. Level-triggered interrupts cannot be handled with the + * edge-triggered handler, without risking IRQ storms and other ugly + * races. + */ + +#ifdef CONFIG_SMP + +#ifdef CONFIG_INTR_REMAP + +/* + * Migrate the IO-APIC irq in the presence of intr-remapping. + * + * For both level and edge triggered, irq migration is a simple atomic + * update(of vector and cpu destination) of IRTE and flush the hardware cache. + * + * For level triggered, we eliminate the io-apic RTE modification (with the + * updated vector information), by using a virtual vector (io-apic pin number). + * Real vector that is used for interrupting cpu will be coming from + * the interrupt-remapping table entry. + */ +static void +migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + struct irte irte; + unsigned int dest; + unsigned int irq; + + if (!cpumask_intersects(mask, cpu_online_mask)) + return; + + irq = desc->irq; + if (get_irte(irq, &irte)) + return; + + cfg = desc->chip_data; + if (assign_irq_vector(irq, cfg, mask)) + return; + + set_extra_move_desc(desc, mask); + + dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask); + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * Modified the IRTE and flushes the Interrupt entry cache. + */ + modify_irte(irq, &irte); + + if (cfg->move_in_progress) + send_cleanup_vector(cfg); + + cpumask_copy(desc->affinity, mask); +} + +/* + * Migrates the IRQ destination in the process context. + */ +static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, + const struct cpumask *mask) +{ + migrate_ioapic_irq_desc(desc, mask); +} +static void set_ir_ioapic_affinity_irq(unsigned int irq, + const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + + set_ir_ioapic_affinity_irq_desc(desc, mask); +} +#else +static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, + const struct cpumask *mask) +{ +} +#endif + +asmlinkage void smp_irq_move_cleanup_interrupt(void) +{ + unsigned vector, me; + + ack_APIC_irq(); + exit_idle(); + irq_enter(); + + me = smp_processor_id(); + for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { + unsigned int irq; + unsigned int irr; + struct irq_desc *desc; + struct irq_cfg *cfg; + irq = __get_cpu_var(vector_irq)[vector]; + + if (irq == -1) + continue; + + desc = irq_to_desc(irq); + if (!desc) + continue; + + cfg = irq_cfg(irq); + spin_lock(&desc->lock); + if (!cfg->move_cleanup_count) + goto unlock; + + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) + goto unlock; + + irr = apic_read(APIC_IRR + (vector / 32 * 0x10)); + /* + * Check if the vector that needs to be cleanedup is + * registered at the cpu's IRR. If so, then this is not + * the best time to clean it up. Lets clean it up in the + * next attempt by sending another IRQ_MOVE_CLEANUP_VECTOR + * to myself. + */ + if (irr & (1 << (vector % 32))) { + apic->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR); + goto unlock; + } + __get_cpu_var(vector_irq)[vector] = -1; + cfg->move_cleanup_count--; +unlock: + spin_unlock(&desc->lock); + } + + irq_exit(); +} + +static void irq_complete_move(struct irq_desc **descp) +{ + struct irq_desc *desc = *descp; + struct irq_cfg *cfg = desc->chip_data; + unsigned vector, me; + + if (likely(!cfg->move_in_progress)) { +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC + if (likely(!cfg->move_desc_pending)) + return; + + /* domain has not changed, but affinity did */ + me = smp_processor_id(); + if (cpumask_test_cpu(me, desc->affinity)) { + *descp = desc = move_irq_desc(desc, me); + /* get the new one */ + cfg = desc->chip_data; + cfg->move_desc_pending = 0; + } +#endif + return; + } + + vector = ~get_irq_regs()->orig_ax; + me = smp_processor_id(); + + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) { +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC + *descp = desc = move_irq_desc(desc, me); + /* get the new one */ + cfg = desc->chip_data; +#endif + send_cleanup_vector(cfg); + } +} +#else +static inline void irq_complete_move(struct irq_desc **descp) {} +#endif + +#ifdef CONFIG_INTR_REMAP +static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + + entry = cfg->irq_2_pin; + for (;;) { + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + io_apic_eoi(apic, pin); + entry = entry->next; + } +} + +static void +eoi_ioapic_irq(struct irq_desc *desc) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int irq; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_irq(irq, cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void ack_x2apic_level(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + ack_x2APIC_irq(); + eoi_ioapic_irq(desc); +} + +static void ack_x2apic_edge(unsigned int irq) +{ + ack_x2APIC_irq(); +} + +#endif + +static void ack_apic_edge(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + + irq_complete_move(&desc); + move_native_irq(irq); + ack_APIC_irq(); +} + +atomic_t irq_mis_count; + +static void ack_apic_level(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + +#ifdef CONFIG_X86_32 + unsigned long v; + int i; +#endif + struct irq_cfg *cfg; + int do_unmask_irq = 0; + + irq_complete_move(&desc); +#ifdef CONFIG_GENERIC_PENDING_IRQ + /* If we are moving the irq we need to mask it */ + if (unlikely(desc->status & IRQ_MOVE_PENDING)) { + do_unmask_irq = 1; + mask_IO_APIC_irq_desc(desc); + } +#endif + +#ifdef CONFIG_X86_32 + /* + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + */ + cfg = desc->chip_data; + i = cfg->vector; + + v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); +#endif + + /* + * We must acknowledge the irq before we move it or the acknowledge will + * not propagate properly. + */ + ack_APIC_irq(); + + /* Now we can move and renable the irq */ + if (unlikely(do_unmask_irq)) { + /* Only migrate the irq if the ack has been received. + * + * On rare occasions the broadcast level triggered ack gets + * delayed going to ioapics, and if we reprogram the + * vector while Remote IRR is still set the irq will never + * fire again. + * + * To prevent this scenario we read the Remote IRR bit + * of the ioapic. This has two effects. + * - On any sane system the read of the ioapic will + * flush writes (and acks) going to the ioapic from + * this cpu. + * - We get to see if the ACK has actually been delivered. + * + * Based on failed experiments of reprogramming the + * ioapic entry from outside of irq context starting + * with masking the ioapic entry and then polling until + * Remote IRR was clear before reprogramming the + * ioapic I don't trust the Remote IRR bit to be + * completey accurate. + * + * However there appears to be no other way to plug + * this race, so if the Remote IRR bit is not + * accurate and is causing problems then it is a hardware bug + * and you can go talk to the chipset vendor about it. + */ + cfg = desc->chip_data; + if (!io_apic_level_ack_pending(cfg)) + move_masked_irq(irq); + unmask_IO_APIC_irq_desc(desc); + } + +#ifdef CONFIG_X86_32 + if (!(v & (1 << (i & 0x1f)))) { + atomic_inc(&irq_mis_count); + spin_lock(&ioapic_lock); + __mask_and_edge_IO_APIC_irq(cfg); + __unmask_and_level_IO_APIC_irq(cfg); + spin_unlock(&ioapic_lock); + } +#endif +} + +static struct irq_chip ioapic_chip __read_mostly = { + .name = "IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_apic_edge, + .eoi = ack_apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +static struct irq_chip ir_ioapic_chip __read_mostly = { + .name = "IR-IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, +#ifdef CONFIG_INTR_REMAP + .ack = ack_x2apic_edge, + .eoi = ack_x2apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ir_ioapic_affinity_irq, +#endif +#endif + .retrigger = ioapic_retrigger_irq, +}; + +static inline void init_IO_APIC_traps(void) +{ + int irq; + struct irq_desc *desc; + struct irq_cfg *cfg; + + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + for_each_irq_desc(irq, desc) { + cfg = desc->chip_data; + if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < NR_IRQS_LEGACY) + make_8259A_irq(irq); + else + /* Strange. Oh, well.. */ + desc->chip = &no_irq_chip; + } + } +} + +/* + * The local APIC irq-chip implementation: + */ + +static void mask_lapic_irq(unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void unmask_lapic_irq(unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static void ack_lapic_irq(unsigned int irq) +{ + ack_APIC_irq(); +} + +static struct irq_chip lapic_chip __read_mostly = { + .name = "local-APIC", + .mask = mask_lapic_irq, + .unmask = unmask_lapic_irq, + .ack = ack_lapic_irq, +}; + +static void lapic_register_intr(int irq, struct irq_desc *desc) +{ + desc->status &= ~IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, + "edge"); +} + +static void __init setup_nmi(void) +{ + /* + * Dirty trick to enable the NMI watchdog ... + * We put the 8259A master into AEOI mode and + * unmask on all local APICs LVT0 as NMI. + * + * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') + * is from Maciej W. Rozycki - so we do not have to EOI from + * the NMI handler or the timer interrupt. + */ + apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); + + enable_NMI_through_LVT0(); + + apic_printk(APIC_VERBOSE, " done.\n"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void __init unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + + pin = find_isa_irq_pin(8, mp_INT); + if (pin == -1) { + WARN_ON_ONCE(1); + return; + } + apic = find_isa_irq_apic(8, mp_INT); + if (apic == -1) { + WARN_ON_ONCE(1); + return; + } + + entry0 = ioapic_read_entry(apic, pin); + clear_IO_APIC_pin(apic, pin); + + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode = 0; /* physical delivery */ + entry1.mask = 0; /* unmask IRQ now */ + entry1.dest = hard_smp_processor_id(); + entry1.delivery_mode = dest_ExtINT; + entry1.polarity = entry0.polarity; + entry1.trigger = 0; + entry1.vector = 0; + + ioapic_write_entry(apic, pin, entry1); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + ioapic_write_entry(apic, pin, entry0); +} + +static int disable_timer_pin_1 __initdata; +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", disable_timer_pin_setup); + +int timer_through_8259 __initdata; + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for all platforms. + */ +static inline void __init check_timer(void) +{ + struct irq_desc *desc = irq_to_desc(0); + struct irq_cfg *cfg = desc->chip_data; + int cpu = boot_cpu_id; + int apic1, pin1, apic2, pin2; + unsigned long flags; + int no_pin1 = 0; + + local_irq_save(flags); + + /* + * get/set the timer IRQ vector: + */ + disable_8259A_irq(0); + assign_irq_vector(0, cfg, apic->target_cpus()); + + /* + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. + */ + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + init_8259A(1); +#ifdef CONFIG_X86_32 + { + unsigned int ver; + + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); + } +#endif + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); + + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + if (intr_remapping_enabled) + panic("BIOS bug: timer not connected to IO-APIC"); + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + if (pin1 != -1) { + /* + * Ok, does IRQ0 through the IOAPIC work? + */ + if (no_pin1) { + add_pin_to_irq_cpu(cfg, cpu, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } else { + /* for edge trigger, setup_IO_APIC_irq already + * leave it unmasked. + * so only need to unmask if it is level-trigger + * do we really have level trigger timer? + */ + int idx; + idx = find_irq_entry(apic1, pin1, mp_INT); + if (idx != -1 && irq_trigger(idx)) + unmask_IO_APIC_irq_desc(desc); + } + if (timer_irq_works()) { + if (nmi_watchdog == NMI_IO_APIC) { + setup_nmi(); + enable_8259A_irq(0); + } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + goto out; + } + if (intr_remapping_enabled) + panic("timer doesn't work through Interrupt-remapped IO-APIC"); + local_irq_disable(); + clear_IO_APIC_pin(apic1, pin1); + if (!no_pin1) + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); + + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + enable_8259A_irq(0); + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); + timer_through_8259 = 1; + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + setup_nmi(); + enable_8259A_irq(0); + } + goto out; + } + /* + * Cleanup, just in case ... + */ + local_irq_disable(); + disable_8259A_irq(0); + clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); + } + + if (nmi_watchdog == NMI_IO_APIC) { + apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " + "through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = NMI_NONE; + } +#ifdef CONFIG_X86_32 + timer_ack = 0; +#endif + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); + + lapic_register_intr(0, desc); + apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ + enable_8259A_irq(0); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + local_irq_disable(); + disable_8259A_irq(0); + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); + + init_8259A(0); + make_8259A_irq(0); + apic_write(APIC_LVT0, APIC_DM_EXTINT); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + local_irq_disable(); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option.\n"); +out: + local_irq_restore(flags); +} + +/* + * Traditionally ISA IRQ2 is the cascade IRQ, and is not available + * to devices. However there may be an I/O APIC pin available for + * this interrupt regardless. The pin may be left unconnected, but + * typically it will be reused as an ExtINT cascade interrupt for + * the master 8259A. In the MPS case such a pin will normally be + * reported as an ExtINT interrupt in the MP table. With ACPI + * there is no provision for ExtINT interrupts, and in the absence + * of an override it would be treated as an ordinary ISA I/O APIC + * interrupt, that is edge-triggered and unmasked by default. We + * used to do this, but it caused problems on some systems because + * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using + * the same ExtINT cascade interrupt to drive the local APIC of the + * bootstrap processor. Therefore we refrain from routing IRQ2 to + * the I/O APIC in all cases now. No actual device should request + * it anyway. --macro + */ +#define PIC_IRQS (1 << PIC_CASCADE_IR) + +void __init setup_IO_APIC(void) +{ + + /* + * calling enable_IO_APIC() is moved to setup_local_APIC for BP + */ + + io_apic_irqs = ~PIC_IRQS; + + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); + /* + * Set up IO-APIC IRQ routing. + */ +#ifdef CONFIG_X86_32 + if (!acpi_ioapic) + setup_ioapic_ids_from_mpc(); +#endif + sync_Arb_IDs(); + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + check_timer(); +} + +/* + * Called after all the initialization is done. If we didnt find any + * APIC bugs then we can allow the modify fast path + */ + +static int __init io_apic_bug_finalize(void) +{ + if (sis_apic_bug == -1) + sis_apic_bug = 0; + return 0; +} + +late_initcall(io_apic_bug_finalize); + +struct sysfs_ioapic_data { + struct sys_device dev; + struct IO_APIC_route_entry entry[0]; +}; +static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; + +static int ioapic_suspend(struct sys_device *dev, pm_message_t state) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) + *entry = ioapic_read_entry(dev->id, i); + + return 0; +} + +static int ioapic_resume(struct sys_device *dev) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + unsigned long flags; + union IO_APIC_reg_00 reg_00; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(dev->id, 0); + if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].apicid; + io_apic_write(dev->id, 0, reg_00.raw); + } + spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) + ioapic_write_entry(dev->id, i, entry[i]); + + return 0; +} + +static struct sysdev_class ioapic_sysdev_class = { + .name = "ioapic", + .suspend = ioapic_suspend, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_sysfs(void) +{ + struct sys_device * dev; + int i, size, error; + + error = sysdev_class_register(&ioapic_sysdev_class); + if (error) + return error; + + for (i = 0; i < nr_ioapics; i++ ) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] + * sizeof(struct IO_APIC_route_entry); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); + if (!mp_ioapic_data[i]) { + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + dev = &mp_ioapic_data[i]->dev; + dev->id = i; + dev->cls = &ioapic_sysdev_class; + error = sysdev_register(dev); + if (error) { + kfree(mp_ioapic_data[i]); + mp_ioapic_data[i] = NULL; + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + } + + return 0; +} + +device_initcall(ioapic_init_sysfs); + +static int nr_irqs_gsi = NR_IRQS_LEGACY; +/* + * Dynamic irq allocate and deallocation + */ +unsigned int create_irq_nr(unsigned int irq_want) +{ + /* Allocate an unused irq */ + unsigned int irq; + unsigned int new; + unsigned long flags; + struct irq_cfg *cfg_new = NULL; + int cpu = boot_cpu_id; + struct irq_desc *desc_new = NULL; + + irq = 0; + if (irq_want < nr_irqs_gsi) + irq_want = nr_irqs_gsi; + + spin_lock_irqsave(&vector_lock, flags); + for (new = irq_want; new < nr_irqs; new++) { + desc_new = irq_to_desc_alloc_cpu(new, cpu); + if (!desc_new) { + printk(KERN_INFO "can not get irq_desc for %d\n", new); + continue; + } + cfg_new = desc_new->chip_data; + + if (cfg_new->vector != 0) + continue; + if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0) + irq = new; + break; + } + spin_unlock_irqrestore(&vector_lock, flags); + + if (irq > 0) { + dynamic_irq_init(irq); + /* restore it, in case dynamic_irq_init clear it */ + if (desc_new) + desc_new->chip_data = cfg_new; + } + return irq; +} + +int create_irq(void) +{ + unsigned int irq_want; + int irq; + + irq_want = nr_irqs_gsi; + irq = create_irq_nr(irq_want); + + if (irq == 0) + irq = -1; + + return irq; +} + +void destroy_irq(unsigned int irq) +{ + unsigned long flags; + struct irq_cfg *cfg; + struct irq_desc *desc; + + /* store it, in case dynamic_irq_cleanup clear it */ + desc = irq_to_desc(irq); + cfg = desc->chip_data; + dynamic_irq_cleanup(irq); + /* connect back irq_cfg */ + if (desc) + desc->chip_data = cfg; + + free_irte(irq); + spin_lock_irqsave(&vector_lock, flags); + __clear_irq_vector(irq, cfg); + spin_unlock_irqrestore(&vector_lock, flags); +} + +/* + * MSI message composition + */ +#ifdef CONFIG_PCI_MSI +static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) +{ + struct irq_cfg *cfg; + int err; + unsigned dest; + + if (disable_apic) + return -ENXIO; + + cfg = irq_cfg(irq); + err = assign_irq_vector(irq, cfg, apic->target_cpus()); + if (err) + return err; + + dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus()); + + if (irq_remapped(irq)) { + struct irte irte; + int ir_index; + u16 sub_handle; + + ir_index = map_irq_to_irte_handle(irq, &sub_handle); + BUG_ON(ir_index == -1); + + memset (&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = apic->irq_dest_mode; + irte.trigger_mode = 0; /* edge */ + irte.dlvry_mode = apic->irq_delivery_mode; + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + modify_irte(irq, &irte); + + msg->address_hi = MSI_ADDR_BASE_HI; + msg->data = sub_handle; + msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | + MSI_ADDR_IR_SHV | + MSI_ADDR_IR_INDEX1(ir_index) | + MSI_ADDR_IR_INDEX2(ir_index); + } else { + if (x2apic_enabled()) + msg->address_hi = MSI_ADDR_BASE_HI | + MSI_ADDR_EXT_DEST_ID(dest); + else + msg->address_hi = MSI_ADDR_BASE_HI; + + msg->address_lo = + MSI_ADDR_BASE_LO | + ((apic->irq_dest_mode == 0) ? + MSI_ADDR_DEST_MODE_PHYSICAL: + MSI_ADDR_DEST_MODE_LOGICAL) | + ((apic->irq_delivery_mode != dest_LowestPrio) ? + MSI_ADDR_REDIRECTION_CPU: + MSI_ADDR_REDIRECTION_LOWPRI) | + MSI_ADDR_DEST_ID(dest); + + msg->data = + MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + ((apic->irq_delivery_mode != dest_LowestPrio) ? + MSI_DATA_DELIVERY_FIXED: + MSI_DATA_DELIVERY_LOWPRI) | + MSI_DATA_VECTOR(cfg->vector); + } + return err; +} + +#ifdef CONFIG_SMP +static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + struct irq_cfg *cfg; + struct msi_msg msg; + unsigned int dest; + + dest = set_desc_affinity(desc, mask); + if (dest == BAD_APICID) + return; + + cfg = desc->chip_data; + + read_msi_msg_desc(desc, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(cfg->vector); + msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; + msg.address_lo |= MSI_ADDR_DEST_ID(dest); + + write_msi_msg_desc(desc, &msg); +} +#ifdef CONFIG_INTR_REMAP +/* + * Migrate the MSI irq to another cpumask. This migration is + * done in the process context using interrupt-remapping hardware. + */ +static void +ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + struct irq_cfg *cfg = desc->chip_data; + unsigned int dest; + struct irte irte; + + if (get_irte(irq, &irte)) + return; + + dest = set_desc_affinity(desc, mask); + if (dest == BAD_APICID) + return; + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * atomically update the IRTE with the new destination and vector. + */ + modify_irte(irq, &irte); + + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ + if (cfg->move_in_progress) + send_cleanup_vector(cfg); +} + +#endif +#endif /* CONFIG_SMP */ + +/* + * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, + * which implement the MSI or MSI-X Capability Structure. + */ +static struct irq_chip msi_chip = { + .name = "PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +static struct irq_chip msi_ir_chip = { + .name = "IR-PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, +#ifdef CONFIG_INTR_REMAP + .ack = ack_x2apic_edge, +#ifdef CONFIG_SMP + .set_affinity = ir_set_msi_irq_affinity, +#endif +#endif + .retrigger = ioapic_retrigger_irq, +}; + +/* + * Map the PCI dev to the corresponding remapping hardware unit + * and allocate 'nvec' consecutive interrupt-remapping table entries + * in it. + */ +static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec) +{ + struct intel_iommu *iommu; + int index; + + iommu = map_dev_to_ir(dev); + if (!iommu) { + printk(KERN_ERR + "Unable to map PCI %s to iommu\n", pci_name(dev)); + return -ENOENT; + } + + index = alloc_irte(iommu, irq, nvec); + if (index < 0) { + printk(KERN_ERR + "Unable to allocate %d IRTE for PCI %s\n", nvec, + pci_name(dev)); + return -ENOSPC; + } + return index; +} + +static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) +{ + int ret; + struct msi_msg msg; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) + return ret; + + set_irq_msi(irq, msidesc); + write_msi_msg(irq, &msg); + + if (irq_remapped(irq)) { + struct irq_desc *desc = irq_to_desc(irq); + /* + * irq migration in process context + */ + desc->status |= IRQ_MOVE_PCNTXT; + set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge"); + } else + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); + + dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq); + + return 0; +} + +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + unsigned int irq; + int ret, sub_handle; + struct msi_desc *msidesc; + unsigned int irq_want; + struct intel_iommu *iommu = NULL; + int index = 0; + ++ /* x86 doesn't support multiple MSI yet */ ++ if (type == PCI_CAP_ID_MSI && nvec > 1) ++ return 1; ++ + irq_want = nr_irqs_gsi; + sub_handle = 0; + list_for_each_entry(msidesc, &dev->msi_list, list) { + irq = create_irq_nr(irq_want); + if (irq == 0) + return -1; + irq_want = irq + 1; + if (!intr_remapping_enabled) + goto no_ir; + + if (!sub_handle) { + /* + * allocate the consecutive block of IRTE's + * for 'nvec' + */ + index = msi_alloc_irte(dev, irq, nvec); + if (index < 0) { + ret = index; + goto error; + } + } else { + iommu = map_dev_to_ir(dev); + if (!iommu) { + ret = -ENOENT; + goto error; + } + /* + * setup the mapping between the irq and the IRTE + * base index, the sub_handle pointing to the + * appropriate interrupt remap table entry. + */ + set_irte_irq(irq, iommu, index, sub_handle); + } +no_ir: + ret = setup_msi_irq(dev, msidesc, irq); + if (ret < 0) + goto error; + sub_handle++; + } + return 0; + +error: + destroy_irq(irq); + return ret; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} + +#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP) +#ifdef CONFIG_SMP +static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + struct irq_cfg *cfg; + struct msi_msg msg; + unsigned int dest; + + dest = set_desc_affinity(desc, mask); + if (dest == BAD_APICID) + return; + + cfg = desc->chip_data; + + dmar_msi_read(irq, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(cfg->vector); + msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; + msg.address_lo |= MSI_ADDR_DEST_ID(dest); + + dmar_msi_write(irq, &msg); +} + +#endif /* CONFIG_SMP */ + +struct irq_chip dmar_msi_type = { + .name = "DMAR_MSI", + .unmask = dmar_msi_unmask, + .mask = dmar_msi_mask, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = dmar_msi_set_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_dmar_msi(unsigned int irq) +{ + int ret; + struct msi_msg msg; + + ret = msi_compose_msg(NULL, irq, &msg); + if (ret < 0) + return ret; + dmar_msi_write(irq, &msg); + set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq, + "edge"); + return 0; +} +#endif + +#ifdef CONFIG_HPET_TIMER + +#ifdef CONFIG_SMP +static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + struct irq_cfg *cfg; + struct msi_msg msg; + unsigned int dest; + + dest = set_desc_affinity(desc, mask); + if (dest == BAD_APICID) + return; + + cfg = desc->chip_data; + + hpet_msi_read(irq, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(cfg->vector); + msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; + msg.address_lo |= MSI_ADDR_DEST_ID(dest); + + hpet_msi_write(irq, &msg); +} + +#endif /* CONFIG_SMP */ + +static struct irq_chip hpet_msi_type = { + .name = "HPET_MSI", + .unmask = hpet_msi_unmask, + .mask = hpet_msi_mask, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = hpet_msi_set_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_hpet_msi(unsigned int irq) +{ + int ret; + struct msi_msg msg; + + ret = msi_compose_msg(NULL, irq, &msg); + if (ret < 0) + return ret; + + hpet_msi_write(irq, &msg); + set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq, + "edge"); + + return 0; +} +#endif + +#endif /* CONFIG_PCI_MSI */ +/* + * Hypertransport interrupt support + */ +#ifdef CONFIG_HT_IRQ + +#ifdef CONFIG_SMP + +static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) +{ + struct ht_irq_msg msg; + fetch_ht_irq_msg(irq, &msg); + + msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); + msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + + msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); + msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); + + write_ht_irq_msg(irq, &msg); +} + +static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc = irq_to_desc(irq); + struct irq_cfg *cfg; + unsigned int dest; + + dest = set_desc_affinity(desc, mask); + if (dest == BAD_APICID) + return; + + cfg = desc->chip_data; + + target_ht_irq(irq, dest, cfg->vector); +} + +#endif + +static struct irq_chip ht_irq_chip = { + .name = "PCI-HT", + .mask = mask_ht_irq, + .unmask = unmask_ht_irq, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = set_ht_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) +{ + struct irq_cfg *cfg; + int err; + + if (disable_apic) + return -ENXIO; + + cfg = irq_cfg(irq); + err = assign_irq_vector(irq, cfg, apic->target_cpus()); + if (!err) { + struct ht_irq_msg msg; + unsigned dest; + + dest = apic->cpu_mask_to_apicid_and(cfg->domain, + apic->target_cpus()); + + msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); + + msg.address_lo = + HT_IRQ_LOW_BASE | + HT_IRQ_LOW_DEST_ID(dest) | + HT_IRQ_LOW_VECTOR(cfg->vector) | + ((apic->irq_dest_mode == 0) ? + HT_IRQ_LOW_DM_PHYSICAL : + HT_IRQ_LOW_DM_LOGICAL) | + HT_IRQ_LOW_RQEOI_EDGE | + ((apic->irq_delivery_mode != dest_LowestPrio) ? + HT_IRQ_LOW_MT_FIXED : + HT_IRQ_LOW_MT_ARBITRATED) | + HT_IRQ_LOW_IRQ_MASKED; + + write_ht_irq_msg(irq, &msg); + + set_irq_chip_and_handler_name(irq, &ht_irq_chip, + handle_edge_irq, "edge"); + + dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq); + } + return err; +} +#endif /* CONFIG_HT_IRQ */ + +#ifdef CONFIG_X86_UV +/* + * Re-target the irq to the specified CPU and enable the specified MMR located + * on the specified blade to allow the sending of MSIs to the specified CPU. + */ +int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, + unsigned long mmr_offset) +{ + const struct cpumask *eligible_cpu = cpumask_of(cpu); + struct irq_cfg *cfg; + int mmr_pnode; + unsigned long mmr_value; + struct uv_IO_APIC_route_entry *entry; + unsigned long flags; + int err; + + cfg = irq_cfg(irq); + + err = assign_irq_vector(irq, cfg, eligible_cpu); + if (err != 0) + return err; + + spin_lock_irqsave(&vector_lock, flags); + set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq, + irq_name); + spin_unlock_irqrestore(&vector_lock, flags); + + mmr_value = 0; + entry = (struct uv_IO_APIC_route_entry *)&mmr_value; + BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + + entry->vector = cfg->vector; + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->polarity = 0; + entry->trigger = 0; + entry->mask = 0; + entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); + + mmr_pnode = uv_blade_to_pnode(mmr_blade); + uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); + + return irq; +} + +/* + * Disable the specified MMR located on the specified blade so that MSIs are + * longer allowed to be sent. + */ +void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset) +{ + unsigned long mmr_value; + struct uv_IO_APIC_route_entry *entry; + int mmr_pnode; + + mmr_value = 0; + entry = (struct uv_IO_APIC_route_entry *)&mmr_value; + BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + + entry->mask = 1; + + mmr_pnode = uv_blade_to_pnode(mmr_blade); + uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); +} +#endif /* CONFIG_X86_64 */ + +int __init io_apic_get_redir_entries (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.entries; +} + +void __init probe_nr_irqs_gsi(void) +{ + int nr = 0; + + nr = acpi_probe_gsi(); + if (nr > nr_irqs_gsi) { + nr_irqs_gsi = nr; + } else { + /* for acpi=off or acpi is not compiled in */ + int idx; + + nr = 0; + for (idx = 0; idx < nr_ioapics; idx++) + nr += io_apic_get_redir_entries(idx) + 1; + + if (nr > nr_irqs_gsi) + nr_irqs_gsi = nr; + } + + printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi); +} + +#ifdef CONFIG_SPARSE_IRQ +int __init arch_probe_nr_irqs(void) +{ + int nr; + + if (nr_irqs > (NR_VECTORS * nr_cpu_ids)) + nr_irqs = NR_VECTORS * nr_cpu_ids; + + nr = nr_irqs_gsi + 8 * nr_cpu_ids; +#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ) + /* + * for MSI and HT dyn irq + */ + nr += nr_irqs_gsi * 16; +#endif + if (nr < nr_irqs) + nr_irqs = nr; + + return 0; +} +#endif + +/* -------------------------------------------------------------------------- + ACPI-based IOAPIC Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +#ifdef CONFIG_X86_32 +int __init io_apic_get_unique_id(int ioapic, int apic_id) +{ + union IO_APIC_reg_00 reg_00; + static physid_mask_t apic_id_map = PHYSID_MASK_NONE; + physid_mask_t tmp; + unsigned long flags; + int i = 0; + + /* + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only + * supports up to 16 on one shared APIC bus. + * + * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full + * advantage of new APIC bus architecture. + */ + + if (physids_empty(apic_id_map)) + apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map); + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + if (apic_id >= get_physical_broadcast()) { + printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " + "%d\n", ioapic, apic_id, reg_00.bits.ID); + apic_id = reg_00.bits.ID; + } + + /* + * Every APIC in a system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(apic_id_map, apic_id)) { + + for (i = 0; i < get_physical_broadcast(); i++) { + if (!apic->check_apicid_used(apic_id_map, i)) + break; + } + + if (i == get_physical_broadcast()) + panic("Max apic_id exceeded!\n"); + + printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " + "trying %d\n", ioapic, apic_id, i); + + apic_id = i; + } + + tmp = apic->apicid_to_cpu_present(apic_id); + physids_or(apic_id_map, apic_id_map, tmp); + + if (reg_00.bits.ID != apic_id) { + reg_00.bits.ID = apic_id; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* Sanity check */ + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } + } + + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); + + return apic_id; +} + +int __init io_apic_get_version(int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.version; +} +#endif + +int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) +{ + struct irq_desc *desc; + struct irq_cfg *cfg; + int cpu = boot_cpu_id; + + if (!IO_APIC_IRQ(irq)) { + apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + desc = irq_to_desc_alloc_cpu(irq, cpu); + if (!desc) { + printk(KERN_INFO "can not get irq_desc %d\n", irq); + return 0; + } + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= NR_IRQS_LEGACY) { + cfg = desc->chip_data; + add_pin_to_irq_cpu(cfg, cpu, ioapic, pin); + } + + setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); + + return 0; +} + + +int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) +{ + int i; + + if (skip_ioapic_setup) + return -1; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].irqtype == mp_INT && + mp_irqs[i].srcbusirq == bus_irq) + break; + if (i >= mp_irq_entries) + return -1; + + *trigger = irq_trigger(i); + *polarity = irq_polarity(i); + return 0; +} + +#endif /* CONFIG_ACPI */ + +/* + * This function currently is only a helper for the i386 smp boot process where + * we need to reprogram the ioredtbls to cater for the cpus which have come online + * so mask in all cases should simply be apic->target_cpus() + */ +#ifdef CONFIG_SMP +void __init setup_ioapic_dest(void) +{ + int pin, ioapic, irq, irq_entry; + struct irq_desc *desc; + struct irq_cfg *cfg; + const struct cpumask *mask; + + if (skip_ioapic_setup == 1) + return; + + for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); + + /* setup_IO_APIC_irqs could fail to get vector for some device + * when you have too many devices, because at that time only boot + * cpu is online. + */ + desc = irq_to_desc(irq); + cfg = desc->chip_data; + if (!cfg->vector) { + setup_IO_APIC_irq(ioapic, pin, irq, desc, + irq_trigger(irq_entry), + irq_polarity(irq_entry)); + continue; + + } + + /* + * Honour affinities which have been set in early boot + */ + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = apic->target_cpus(); + + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq_desc(desc, mask); + else + set_ioapic_affinity_irq_desc(desc, mask); + } + + } +} +#endif + +#define IOAPIC_RESOURCE_NAME_SIZE 11 + +static struct resource *ioapic_resources; + +static struct resource * __init ioapic_setup_resources(void) +{ + unsigned long n; + struct resource *res; + char *mem; + int i; + + if (nr_ioapics <= 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= nr_ioapics; + + mem = alloc_bootmem(n); + res = (void *)mem; + + if (mem != NULL) { + mem += sizeof(struct resource) * nr_ioapics; + + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + sprintf(mem, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + } + } + + ioapic_resources = res; + + return res; +} + +void __init ioapic_init_mappings(void) +{ + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + struct resource *ioapic_res; + int i; + + ioapic_res = ioapic_setup_resources(); + for (i = 0; i < nr_ioapics; i++) { + if (smp_found_config) { + ioapic_phys = mp_ioapics[i].apicaddr; +#ifdef CONFIG_X86_32 + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + skip_ioapic_setup = 1; + goto fake_ioapic_page; + } +#endif + } else { +#ifdef CONFIG_X86_32 +fake_ioapic_page: +#endif + ioapic_phys = (unsigned long) + alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + apic_printk(APIC_VERBOSE, + "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx), ioapic_phys); + idx++; + + if (ioapic_res != NULL) { + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + ioapic_res++; + } + } +} + +static int __init ioapic_insert_resources(void) +{ + int i; + struct resource *r = ioapic_resources; + + if (!r) { + if (nr_ioapics > 0) { + printk(KERN_ERR + "IO APIC resources couldn't be allocated.\n"); + return -1; + } + return 0; + } + + for (i = 0; i < nr_ioapics; i++) { + insert_resource(&iomem_resource, r); + r++; + } + + return 0; +} + +/* Insert the IO APIC resources after PCI initialization has occured to handle + * IO APICS that are mapped in on a BAR in PCI space. */ +late_initcall(ioapic_insert_resources);