From: Takashi Iwai Date: Thu, 10 Nov 2016 21:17:40 +0000 (+0100) Subject: ASoC: doc: ReSTize DAI.txt X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e732d1bcd452a040a18242d555996703465c1ca7;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ASoC: doc: ReSTize DAI.txt A simple conversion from a plain text file with slight reformatting / corrections. The file name was changed to lower letters to align with others. Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt deleted file mode 100644 index c9679264c559..000000000000 --- a/Documentation/sound/alsa/soc/DAI.txt +++ /dev/null @@ -1,56 +0,0 @@ -ASoC currently supports the three main Digital Audio Interfaces (DAI) found on -SoC controllers and portable audio CODECs today, namely AC97, I2S and PCM. - - -AC97 -==== - - AC97 is a five wire interface commonly found on many PC sound cards. It is -now also popular in many portable devices. This DAI has a reset line and time -multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines. -The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the -frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 -frame is 21uS long and is divided into 13 time slots. - -The AC97 specification can be found at :- -http://www.intel.com/p/en_US/business/design - - -I2S -=== - - I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and -Rx lines are used for audio transmission, whilst the bit clock (BCLK) and -left/right clock (LRC) synchronise the link. I2S is flexible in that either the -controller or CODEC can drive (master) the BCLK and LRC clock lines. Bit clock -usually varies depending on the sample rate and the master system clock -(SYSCLK). LRCLK is the same as the sample rate. A few devices support separate -ADC and DAC LRCLKs, this allows for simultaneous capture and playback at -different sample rates. - -I2S has several different operating modes:- - - o I2S - MSB is transmitted on the falling edge of the first BCLK after LRC - transition. - - o Left Justified - MSB is transmitted on transition of LRC. - - o Right Justified - MSB is transmitted sample size BCLKs before LRC - transition. - -PCM -=== - -PCM is another 4 wire interface, very similar to I2S, which can support a more -flexible protocol. It has bit clock (BCLK) and sync (SYNC) lines that are used -to synchronise the link whilst the Tx and Rx lines are used to transmit and -receive the audio data. Bit clock usually varies depending on sample rate -whilst sync runs at the sample rate. PCM also supports Time Division -Multiplexing (TDM) in that several devices can use the bus simultaneously (this -is sometimes referred to as network mode). - -Common PCM operating modes:- - - o Mode A - MSB is transmitted on falling edge of first BCLK after FRAME/SYNC. - - o Mode B - MSB is transmitted on rising edge of FRAME/SYNC. diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst new file mode 100644 index 000000000000..55820e51708f --- /dev/null +++ b/Documentation/sound/soc/dai.rst @@ -0,0 +1,64 @@ +================================== +ASoC Digital Audio Interface (DAI) +================================== + +ASoC currently supports the three main Digital Audio Interfaces (DAI) found on +SoC controllers and portable audio CODECs today, namely AC97, I2S and PCM. + + +AC97 +==== + +AC97 is a five wire interface commonly found on many PC sound cards. It is +now also popular in many portable devices. This DAI has a reset line and time +multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines. +The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the +frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 +frame is 21uS long and is divided into 13 time slots. + +The AC97 specification can be found at : +http://www.intel.com/p/en_US/business/design + + +I2S +=== + +I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and +Rx lines are used for audio transmission, whilst the bit clock (BCLK) and +left/right clock (LRC) synchronise the link. I2S is flexible in that either the +controller or CODEC can drive (master) the BCLK and LRC clock lines. Bit clock +usually varies depending on the sample rate and the master system clock +(SYSCLK). LRCLK is the same as the sample rate. A few devices support separate +ADC and DAC LRCLKs, this allows for simultaneous capture and playback at +different sample rates. + +I2S has several different operating modes:- + +I2S + MSB is transmitted on the falling edge of the first BCLK after LRC + transition. + +Left Justified + MSB is transmitted on transition of LRC. + +Right Justified + MSB is transmitted sample size BCLKs before LRC transition. + +PCM +=== + +PCM is another 4 wire interface, very similar to I2S, which can support a more +flexible protocol. It has bit clock (BCLK) and sync (SYNC) lines that are used +to synchronise the link whilst the Tx and Rx lines are used to transmit and +receive the audio data. Bit clock usually varies depending on sample rate +whilst sync runs at the sample rate. PCM also supports Time Division +Multiplexing (TDM) in that several devices can use the bus simultaneously (this +is sometimes referred to as network mode). + +Common PCM operating modes:- + +Mode A + MSB is transmitted on falling edge of first BCLK after FRAME/SYNC. + +Mode B + MSB is transmitted on rising edge of FRAME/SYNC. diff --git a/Documentation/sound/soc/index.rst b/Documentation/sound/soc/index.rst index a2e023c91df2..aea7ae7e5aad 100644 --- a/Documentation/sound/soc/index.rst +++ b/Documentation/sound/soc/index.rst @@ -9,3 +9,4 @@ The documentation is spilt into the following sections:- overview codec + dai