From: Jani Nikula Date: Fri, 15 Apr 2016 12:47:31 +0000 (+0300) Subject: drm/i915/dsi: fix CHV dsi encoder hardware state readout on port C X-Git-Tag: MMI-PSA29.97-13-9~7427^2~45^2~237 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e6f577893d0a4c1f62585bc426ab32d88593d7da;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git drm/i915/dsi: fix CHV dsi encoder hardware state readout on port C Due to "some hardware limitation" the DPI enable bit in port C control register does not get set on VLV. As a workaround we check the status in pipe B conf register instead. The workaround was added in commit c0beefd29fcb1ca998f0f9ba41be8539f8eeba9b Author: Gaurav K Singh Date: Tue Dec 9 10:59:20 2014 +0530 drm/i915: Software workaround for getting the HW status of DSI Port C on BYT Empirical evidence (on Surface 3 with DSI on port C per VBT) shows that this is the case also on CHV, so extend the workaround to CHV. We still have the device ready register check in place, so this should not get confused with e.g. HDMI on pipe B. This fixes a number of state checker warnings on CHV DSI port C. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1460724451-13810-1-git-send-email-jani.nikula@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index a3cb89ee7fd0..34328ddaaab5 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -725,11 +725,12 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port); bool enabled = I915_READ(ctrl_reg) & DPI_ENABLE; - /* Due to some hardware limitations on BYT, MIPI Port C DPI - * Enable bit does not get set. To check whether DSI Port C - * was enabled in BIOS, check the Pipe B enable bit + /* + * Due to some hardware limitations on VLV/CHV, the DPI enable + * bit in port C control register does not get set. As a + * workaround, check pipe B conf instead. */ - if (IS_VALLEYVIEW(dev) && port == PORT_C) + if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) && port == PORT_C) enabled = I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE; /* Try command mode if video mode not enabled */