From: Joe Perches Date: Mon, 10 Nov 2014 06:46:35 +0000 (-0800) Subject: tty: pr_warning->pr_warn and logging neatening X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e620e54884ceb983c38f979a22fd04ae0820c725;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git tty: pr_warning->pr_warn and logging neatening Convert the pr_warning to the more common pr_warn. Other miscellanea: o Convert unusual PR_FMT define and uses to pr_fmt o Remove unnecessary OOM message o Fix grammar in an error message o Convert a pr_warning with a KERN_ERR to pr_err Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 4f485e88f60c..9d29d7e4b28c 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -309,8 +309,8 @@ static int __init ehv_bc_console_init(void) * handle for udbg. */ if (stdout_bc != CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE) - pr_warning("ehv-bc: udbg handle %u is not the stdout handle\n", - CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE); + pr_warn("ehv-bc: udbg handle %u is not the stdout handle\n", + CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE); #endif /* add_preferred_console() must be called before register_console(), diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 858291ca889c..59ed783c4bcd 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -249,7 +249,7 @@ static int lock_card(struct isi_board *card) spin_unlock_irqrestore(&card->card_lock, card->flags); msleep(10); } - pr_warning("Failed to lock Card (0x%lx)\n", card->base); + pr_warn("Failed to lock Card (0x%lx)\n", card->base); return 0; /* Failed to acquire the card! */ } @@ -378,13 +378,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port, char *name, const char *routine) { if (!port) { - pr_warning("Warning: bad isicom magic for dev %s in %s.\n", - name, routine); + pr_warn("Warning: bad isicom magic for dev %s in %s\n", + name, routine); return 1; } if (port->magic != ISICOM_MAGIC) { - pr_warning("Warning: NULL isicom port for dev %s in %s.\n", - name, routine); + pr_warn("Warning: NULL isicom port for dev %s in %s\n", + name, routine); return 1; } @@ -546,8 +546,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) byte_count = header & 0xff; if (channel + 1 > card->port_count) { - pr_warning("%s(0x%lx): %d(channel) > port_count.\n", - __func__, base, channel+1); + pr_warn("%s(0x%lx): %d(channel) > port_count\n", + __func__, base, channel + 1); outw(0x0000, base+0x04); /* enable interrupts */ spin_unlock(&card->card_lock); return IRQ_HANDLED; diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index d62d8daac8ab..984e1c050096 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -517,14 +517,15 @@ static void sport_set_termios(struct uart_port *port, up->csize = 5; break; default: - pr_warning("requested word length not supported\n"); + pr_warn("requested word length not supported\n"); + break; } if (termios->c_cflag & CSTOPB) { up->stopb = 1; } if (termios->c_cflag & PARENB) { - pr_warning("PAREN bits is not supported yet\n"); + pr_warn("PAREN bit is not supported yet\n"); /* up->parib = 1; */ } diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 445799dc9846..e1f4fdad02c9 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1371,7 +1371,7 @@ static void hsu_global_init(void) hsu->iolen = 0x1000; if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) - pr_warning("HSU: error in request mem region\n"); + pr_warn("HSU: error in request mem region\n"); hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); if (!hsu->reg) { diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 1504a14ec1a6..77239d5e620d 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -27,6 +27,8 @@ * interrupt for a low speed UART device */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #ifdef CONFIG_MAGIC_SYSRQ #define SUPPORT_SYSRQ #endif @@ -47,8 +49,6 @@ #include "mrst_max3110.h" -#define PR_FMT "mrst_max3110: " - #define UART_TX_NEEDED 1 #define CON_TX_NEEDED 2 #define BIT_IRQ_PENDING 3 @@ -127,8 +127,8 @@ static int max3110_out(struct uart_max3110 *max, const u16 out) *obuf = out; ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); if (ret) { - pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n", - __func__, ret, out); + pr_warn("%s: get err msg %d when sending 0x%x\n", + __func__, ret, out); goto exit; } @@ -153,10 +153,8 @@ static int max3110_read_multi(struct uart_max3110 *max) blen = M3110_RX_FIFO_DEPTH * sizeof(u16); buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); - if (!buf) { - pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__); + if (!buf) return 0; - } /* tx/rx always have the same length */ obuf = buf; @@ -212,13 +210,13 @@ serial_m3110_con_setup(struct console *co, char *options) int parity = 'n'; int flow = 'n'; - pr_info(PR_FMT "setting up console\n"); + pr_info("setting up console\n"); if (co->index == -1) co->index = 0; if (!max) { - pr_err(PR_FMT "pmax is NULL, return"); + pr_err("pmax is NULL, return\n"); return -ENODEV; } @@ -296,8 +294,7 @@ static void send_circ_buf(struct uart_max3110 *max, ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); if (ret) - pr_warning(PR_FMT "%s(): get err msg %d\n", - __func__, ret); + pr_warn("%s: get err msg %d\n", __func__, ret); receive_chars(max, ibuf, len); @@ -411,7 +408,7 @@ static int max3110_main_thread(void *_max) int ret = 0; struct circ_buf *xmit = &max->con_xmit; - pr_info(PR_FMT "start main thread\n"); + pr_info("start main thread\n"); do { wait_event_interruptible(*wq, @@ -455,7 +452,7 @@ static int max3110_read_thread(void *_max) { struct uart_max3110 *max = _max; - pr_info(PR_FMT "start read thread\n"); + pr_info("start read thread\n"); do { /* * If can't acquire the mutex, it means the main thread @@ -481,7 +478,7 @@ static int serial_m3110_startup(struct uart_port *port) int ret = 0; if (port->line != 0) { - pr_err(PR_FMT "uart port startup failed\n"); + pr_err("uart port startup failed\n"); return -1; } @@ -504,7 +501,7 @@ static int serial_m3110_startup(struct uart_port *port) if (IS_ERR(max->read_thread)) { ret = PTR_ERR(max->read_thread); max->read_thread = NULL; - pr_err(PR_FMT "Can't create read thread!\n"); + pr_err("Can't create read thread!\n"); return ret; } } diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index c039cfea5b11..8a89f6e7715d 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -924,7 +924,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) if (kbd->kbdmode != VC_UNICODE) { if (!up_flag) - pr_warning("keyboard mode must be unicode for braille patterns\n"); + pr_warn("keyboard mode must be unicode for braille patterns\n"); return; } @@ -1253,8 +1253,8 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (raw_mode && !hw_raw) if (emulate_raw(vc, keycode, !down << 7)) if (keycode < BTN_MISC && printk_ratelimit()) - pr_warning("can't emulate rawmode for keycode %d\n", - keycode); + pr_warn("can't emulate rawmode for keycode %d\n", + keycode); #ifdef CONFIG_SPARC if (keycode == KEY_A && sparc_l1_a_state) { diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index ed0136519422..f3fbbbca9bde 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3855,8 +3855,8 @@ void do_unblank_screen(int leaving_gfx) return; if (!vc_cons_allocated(fg_console)) { /* impossible */ - pr_warning("unblank_screen: tty %d not allocated ??\n", - fg_console+1); + pr_warn("unblank_screen: tty %d not allocated ??\n", + fg_console + 1); return; } vc = vc_cons[fg_console].d;