From: Jon Hunter Date: Wed, 10 Apr 2013 17:31:07 +0000 (-0500) Subject: ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e60f18d6bca2753c12f0b3229a250d9a55954d41;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards Commit ff5c9059 (ARM: dts: OMAP3+: Correct gpio #interrupts-cells property) updated the number of interrupt cells required for configuring gpios as interrupts for other devices (such as ethernet controllers). This update allowed the interrupt type (edge, level, etc) to be configured via device-tree (as described in the Documentation/devicetree/bindings/gpio/gpio-omap.txt). This broke ethernet support on the OMAP4 SDP board that defines a gpio as the ethernet IRQ because the interrupt type (level, edge, etc) was not getting configured correctly. This board use the ks8851 ethernet chip which has an active low interrupt. Fix this by defining the gpio interrupt as active-low in the device-tree binding. Please note that the OMAP4-VAR-SOM also uses the same ethernet controller and it is expected it will have the same problem. So the same fix is also applied to this board. Signed-off-by: Jon Hunter Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index c387bdc1b1d1..25cbe43fa08a 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -363,7 +363,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; - interrupts = <2>; /* gpio line 34 */ + interrupts = <2 8>; /* gpio line 34, low triggered */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 222a413c2c51..7e04103779c4 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -68,7 +68,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio6>; - interrupts = <11>; /* gpio line 171 */ + interrupts = <11 8>; /* gpio line 171, low triggered */ vdd-supply = <&vdd_eth>; }; };