From: Mark Einon Date: Fri, 3 Oct 2014 20:45:53 +0000 (+0100) Subject: staging: et131x: Remove et131x driver from drivers/staging X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e603984823a9218857c599195aaa514c5343de03;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git staging: et131x: Remove et131x driver from drivers/staging The current version of the et131x driver has been accepted into the main tree at /drivers/net/ethernet, so it can now be removed from staging. The MAINTAINERS entry has not been touched here, as the patch to add the driver to drivers/net modifies it correctly. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 04bda5cbce93..4690ae9a267f 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -24,8 +24,6 @@ menuconfig STAGING if STAGING -source "drivers/staging/et131x/Kconfig" - source "drivers/staging/slicoss/Kconfig" source "drivers/staging/wlan-ng/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 66a6932c05d9..c780a0e70e15 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_STAGING) += staging.o obj-y += media/ -obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig deleted file mode 100644 index 8190f2aaf53b..000000000000 --- a/drivers/staging/et131x/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ET131X - tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI && NET && NETDEVICES - select PHYLIB - default n - ---help--- - This driver supports Agere ET-1310 ethernet adapters. - - To compile this driver as a module, choose M here. The module - will be called et131x. diff --git a/drivers/staging/et131x/Makefile b/drivers/staging/et131x/Makefile deleted file mode 100644 index 027ff9453fe1..000000000000 --- a/drivers/staging/et131x/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Agere ET-131x ethernet driver -# - -obj-$(CONFIG_ET131X) += et131x.o diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README deleted file mode 100644 index 13c816863d69..000000000000 --- a/drivers/staging/et131x/README +++ /dev/null @@ -1,15 +0,0 @@ -This is a driver for the ET1310 network device. - -Based on the driver found at https://sourceforge.net/projects/et131x/ - -Cleaned up immensely by Olaf Hartman and Christoph Hellwig - -Note, the powermanagement options were removed from the vendor provided -driver as they did not build properly at the time. - -TODO: - -Please send patches to: - Greg Kroah-Hartman - Mark Einon - diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c deleted file mode 100644 index 384dc163851b..000000000000 --- a/drivers/staging/et131x/et131x.c +++ /dev/null @@ -1,4121 +0,0 @@ -/* Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - * Copyright (c) 2011 Mark Einon - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "et131x.h" - -MODULE_AUTHOR("Victor Soriano "); -MODULE_AUTHOR("Mark Einon "); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere Systems"); - -/* EEPROM defines */ -#define MAX_NUM_REGISTER_POLLS 1000 -#define MAX_NUM_WRITE_RETRIES 2 - -/* MAC defines */ -#define COUNTER_WRAP_16_BIT 0x10000 -#define COUNTER_WRAP_12_BIT 0x1000 - -/* PCI defines */ -#define INTERNAL_MEM_SIZE 0x400 /* 1024 of internal memory */ -#define INTERNAL_MEM_RX_OFFSET 0x1FF /* 50% Tx, 50% Rx */ - -/* ISR defines */ -/* For interrupts, normal running is: - * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt, - * watchdog_interrupt & txdma_xfer_done - * - * In both cases, when flow control is enabled for either Tx or bi-direction, - * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the - * buffer rings are running low. - */ -#define INT_MASK_DISABLE 0xffffffff - -/* NOTE: Masking out MAC_STAT Interrupt for now... - * #define INT_MASK_ENABLE 0xfff6bf17 - * #define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7 - */ -#define INT_MASK_ENABLE 0xfffebf17 -#define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7 - -/* General defines */ -/* Packet and header sizes */ -#define NIC_MIN_PACKET_SIZE 60 - -/* Multicast list size */ -#define NIC_MAX_MCAST_LIST 128 - -/* Supported Filters */ -#define ET131X_PACKET_TYPE_DIRECTED 0x0001 -#define ET131X_PACKET_TYPE_MULTICAST 0x0002 -#define ET131X_PACKET_TYPE_BROADCAST 0x0004 -#define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008 -#define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010 - -/* Tx Timeout */ -#define ET131X_TX_TIMEOUT (1 * HZ) -#define NIC_SEND_HANG_THRESHOLD 0 - -/* MP_ADAPTER flags */ -#define FMP_ADAPTER_INTERRUPT_IN_USE 0x00000008 - -/* MP_SHARED flags */ -#define FMP_ADAPTER_LOWER_POWER 0x00200000 - -#define FMP_ADAPTER_NON_RECOVER_ERROR 0x00800000 -#define FMP_ADAPTER_HARDWARE_ERROR 0x04000000 - -#define FMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000 - -/* Some offsets in PCI config space that are actually used. */ -#define ET1310_PCI_MAC_ADDRESS 0xA4 -#define ET1310_PCI_EEPROM_STATUS 0xB2 -#define ET1310_PCI_ACK_NACK 0xC0 -#define ET1310_PCI_REPLAY 0xC2 -#define ET1310_PCI_L0L1LATENCY 0xCF - -/* PCI Product IDs */ -#define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */ -#define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */ - -/* Define order of magnitude converter */ -#define NANO_IN_A_MICRO 1000 - -#define PARM_RX_NUM_BUFS_DEF 4 -#define PARM_RX_TIME_INT_DEF 10 -#define PARM_RX_MEM_END_DEF 0x2bc -#define PARM_TX_TIME_INT_DEF 40 -#define PARM_TX_NUM_BUFS_DEF 4 -#define PARM_DMA_CACHE_DEF 0 - -/* RX defines */ -#define FBR_CHUNKS 32 -#define MAX_DESC_PER_RING_RX 1024 - -/* number of RFDs - default and min */ -#define RFD_LOW_WATER_MARK 40 -#define NIC_DEFAULT_NUM_RFD 1024 -#define NUM_FBRS 2 - -#define MAX_PACKETS_HANDLED 256 - -#define ALCATEL_MULTICAST_PKT 0x01000000 -#define ALCATEL_BROADCAST_PKT 0x02000000 - -/* typedefs for Free Buffer Descriptors */ -struct fbr_desc { - u32 addr_lo; - u32 addr_hi; - u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */ -}; - -/* Packet Status Ring Descriptors - * - * Word 0: - * - * top 16 bits are from the Alcatel Status Word as enumerated in - * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) - * - * 0: hp hash pass - * 1: ipa IP checksum assist - * 2: ipp IP checksum pass - * 3: tcpa TCP checksum assist - * 4: tcpp TCP checksum pass - * 5: wol WOL Event - * 6: rxmac_error RXMAC Error Indicator - * 7: drop Drop packet - * 8: ft Frame Truncated - * 9: jp Jumbo Packet - * 10: vp VLAN Packet - * 11-15: unused - * 16: asw_prev_pkt_dropped e.g. IFG too small on previous - * 17: asw_RX_DV_event short receive event detected - * 18: asw_false_carrier_event bad carrier since last good packet - * 19: asw_code_err one or more nibbles signalled as errors - * 20: asw_CRC_err CRC error - * 21: asw_len_chk_err frame length field incorrect - * 22: asw_too_long frame length > 1518 bytes - * 23: asw_OK valid CRC + no code error - * 24: asw_multicast has a multicast address - * 25: asw_broadcast has a broadcast address - * 26: asw_dribble_nibble spurious bits after EOP - * 27: asw_control_frame is a control frame - * 28: asw_pause_frame is a pause frame - * 29: asw_unsupported_op unsupported OP code - * 30: asw_VLAN_tag VLAN tag detected - * 31: asw_long_evt Rx long event - * - * Word 1: - * 0-15: length length in bytes - * 16-25: bi Buffer Index - * 26-27: ri Ring Index - * 28-31: reserved - */ -struct pkt_stat_desc { - u32 word0; - u32 word1; -}; - -/* Typedefs for the RX DMA status word */ - -/* rx status word 0 holds part of the status bits of the Rx DMA engine - * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word - * which contains the Free Buffer ring 0 and 1 available offset. - * - * bit 0-9 FBR1 offset - * bit 10 Wrap flag for FBR1 - * bit 16-25 FBR0 offset - * bit 26 Wrap flag for FBR0 - */ - -/* RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine - * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word - * which contains the Packet Status Ring available offset. - * - * bit 0-15 reserved - * bit 16-27 PSRoffset - * bit 28 PSRwrap - * bit 29-31 unused - */ - -/* struct rx_status_block is a structure representing the status of the Rx - * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020 - */ -struct rx_status_block { - u32 word0; - u32 word1; -}; - -/* Structure for look-up table holding free buffer ring pointers, addresses - * and state. - */ -struct fbr_lookup { - void *virt[MAX_DESC_PER_RING_RX]; - u32 bus_high[MAX_DESC_PER_RING_RX]; - u32 bus_low[MAX_DESC_PER_RING_RX]; - void *ring_virtaddr; - dma_addr_t ring_physaddr; - void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - u32 local_full; - u32 num_entries; - dma_addr_t buffsize; -}; - -/* struct rx_ring is the structure representing the adaptor's local - * reference(s) to the rings - */ -struct rx_ring { - struct fbr_lookup *fbr[NUM_FBRS]; - void *ps_ring_virtaddr; - dma_addr_t ps_ring_physaddr; - u32 local_psr_full; - u32 psr_entries; - - struct rx_status_block *rx_status_block; - dma_addr_t rx_status_bus; - - struct list_head recv_list; - u32 num_ready_recv; - - u32 num_rfd; - - bool unfinished_receives; -}; - -/* TX defines */ -/* word 2 of the control bits in the Tx Descriptor ring for the ET-1310 - * - * 0-15: length of packet - * 16-27: VLAN tag - * 28: VLAN CFI - * 29-31: VLAN priority - * - * word 3 of the control bits in the Tx Descriptor ring for the ET-1310 - * - * 0: last packet in the sequence - * 1: first packet in the sequence - * 2: interrupt the processor when this pkt sent - * 3: Control word - no packet data - * 4: Issue half-duplex backpressure : XON/XOFF - * 5: send pause frame - * 6: Tx frame has error - * 7: append CRC - * 8: MAC override - * 9: pad packet - * 10: Packet is a Huge packet - * 11: append VLAN tag - * 12: IP checksum assist - * 13: TCP checksum assist - * 14: UDP checksum assist - */ -#define TXDESC_FLAG_LASTPKT 0x0001 -#define TXDESC_FLAG_FIRSTPKT 0x0002 -#define TXDESC_FLAG_INTPROC 0x0004 - -/* struct tx_desc represents each descriptor on the ring */ -struct tx_desc { - u32 addr_hi; - u32 addr_lo; - u32 len_vlan; /* control words how to xmit the */ - u32 flags; /* data (detailed above) */ -}; - -/* The status of the Tx DMA engine it sits in free memory, and is pointed to - * by 0x101c / 0x1020. This is a DMA10 type - */ - -/* TCB (Transmit Control Block: Host Side) */ -struct tcb { - struct tcb *next; /* Next entry in ring */ - u32 count; /* Used to spot stuck/lost packets */ - u32 stale; /* Used to spot stuck/lost packets */ - struct sk_buff *skb; /* Network skb we are tied to */ - u32 index; /* Ring indexes */ - u32 index_start; -}; - -/* Structure representing our local reference(s) to the ring */ -struct tx_ring { - /* TCB (Transmit Control Block) memory and lists */ - struct tcb *tcb_ring; - - /* List of TCBs that are ready to be used */ - struct tcb *tcb_qhead; - struct tcb *tcb_qtail; - - /* list of TCBs that are currently being sent. */ - struct tcb *send_head; - struct tcb *send_tail; - int used; - - /* The actual descriptor ring */ - struct tx_desc *tx_desc_ring; - dma_addr_t tx_desc_ring_pa; - - /* send_idx indicates where we last wrote to in the descriptor ring. */ - u32 send_idx; - - /* The location of the write-back status block */ - u32 *tx_status; - dma_addr_t tx_status_pa; - - /* Packets since the last IRQ: used for interrupt coalescing */ - int since_irq; -}; - -/* Do not change these values: if changed, then change also in respective - * TXdma and Rxdma engines - */ -#define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */ -#define NUM_TCB 64 - -/* These values are all superseded by registry entries to facilitate tuning. - * Once the desired performance has been achieved, the optimal registry values - * should be re-populated to these #defines: - */ -#define TX_ERROR_PERIOD 1000 - -#define LO_MARK_PERCENT_FOR_PSR 15 -#define LO_MARK_PERCENT_FOR_RX 15 - -/* RFD (Receive Frame Descriptor) */ -struct rfd { - struct list_head list_node; - struct sk_buff *skb; - u32 len; /* total size of receive frame */ - u16 bufferindex; - u8 ringindex; -}; - -/* Flow Control */ -#define FLOW_BOTH 0 -#define FLOW_TXONLY 1 -#define FLOW_RXONLY 2 -#define FLOW_NONE 3 - -/* Struct to define some device statistics */ -struct ce_stats { - u32 multicast_pkts_rcvd; - u32 rcvd_pkts_dropped; - - u32 tx_underflows; - u32 tx_collisions; - u32 tx_excessive_collisions; - u32 tx_first_collisions; - u32 tx_late_collisions; - u32 tx_max_pkt_errs; - u32 tx_deferred; - - u32 rx_overflows; - u32 rx_length_errs; - u32 rx_align_errs; - u32 rx_crc_errs; - u32 rx_code_violations; - u32 rx_other_errs; - - u32 interrupt_status; -}; - -/* The private adapter structure */ -struct et131x_adapter { - struct net_device *netdev; - struct pci_dev *pdev; - struct mii_bus *mii_bus; - struct phy_device *phydev; - struct napi_struct napi; - - /* Flags that indicate current state of the adapter */ - u32 flags; - - /* local link state, to determine if a state change has occurred */ - int link; - - /* Configuration */ - u8 rom_addr[ETH_ALEN]; - u8 addr[ETH_ALEN]; - bool has_eeprom; - u8 eeprom_data[2]; - - spinlock_t tcb_send_qlock; /* protects the tx_ring send tcb list */ - spinlock_t tcb_ready_qlock; /* protects the tx_ring ready tcb list */ - spinlock_t rcv_lock; /* protects the rx_ring receive list */ - - /* Packet Filter and look ahead size */ - u32 packet_filter; - - /* multicast list */ - u32 multicast_addr_count; - u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN]; - - /* Pointer to the device's PCI register space */ - struct address_map __iomem *regs; - - /* Registry parameters */ - u8 wanted_flow; /* Flow we want for 802.3x flow control */ - u32 registry_jumbo_packet; /* Max supported ethernet packet size */ - - /* Derived from the registry: */ - u8 flow; /* flow control validated by the far-end */ - - /* Minimize init-time */ - struct timer_list error_timer; - - /* variable putting the phy into coma mode when boot up with no cable - * plugged in after 5 seconds - */ - u8 boot_coma; - - /* Tx Memory Variables */ - struct tx_ring tx_ring; - - /* Rx Memory Variables */ - struct rx_ring rx_ring; - - struct ce_stats stats; -}; - -static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status) -{ - u32 reg; - int i; - - /* 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and - * bits 7,1:0 both equal to 1, at least once after reset. - * Subsequent operations need only to check that bits 1:0 are equal - * to 1 prior to starting a single byte read/write - */ - for (i = 0; i < MAX_NUM_REGISTER_POLLS; i++) { - if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP, ®)) - return -EIO; - - /* I2C idle and Phy Queue Avail both true */ - if ((reg & 0x3000) == 0x3000) { - if (status) - *status = reg; - return reg & 0xFF; - } - } - return -ETIMEDOUT; -} - -static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) -{ - struct pci_dev *pdev = adapter->pdev; - int index = 0; - int retries; - int err = 0; - int writeok = 0; - u32 status; - u32 val = 0; - - /* For an EEPROM, an I2C single byte write is defined as a START - * condition followed by the device address, EEPROM address, one byte - * of data and a STOP condition. The STOP condition will trigger the - * EEPROM's internally timed write cycle to the nonvolatile memory. - * All inputs are disabled during this write cycle and the EEPROM will - * not respond to any access until the internal write is complete. - */ - err = eeprom_wait_ready(pdev, NULL); - if (err < 0) - return err; - - /* 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0, - * and bits 1:0 both =0. Bit 5 should be set according to the - * type of EEPROM being accessed (1=two byte addressing, 0=one - * byte addressing). - */ - if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE | - LBCIF_CONTROL_I2C_WRITE)) - return -EIO; - - /* Prepare EEPROM address for Step 3 */ - for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { - if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) - break; - /* Write the data to the LBCIF Data Register (the I2C write - * will begin). - */ - if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER, data)) - break; - /* Monitor bit 1:0 of the LBCIF Status Register. When bits - * 1:0 are both equal to 1, the I2C write has completed and the - * internal write cycle of the EEPROM is about to start. - * (bits 1:0 = 01 is a legal state while waiting from both - * equal to 1, but bits 1:0 = 10 is invalid and implies that - * something is broken). - */ - err = eeprom_wait_ready(pdev, &status); - if (err < 0) - return 0; - - /* Check bit 3 of the LBCIF Status Register. If equal to 1, - * an error has occurred.Don't break here if we are revision - * 1, this is so we do a blind write for load bug. - */ - if ((status & LBCIF_STATUS_GENERAL_ERROR) && - adapter->pdev->revision == 0) - break; - - /* Check bit 2 of the LBCIF Status Register. If equal to 1 an - * ACK error has occurred on the address phase of the write. - * This could be due to an actual hardware failure or the - * EEPROM may still be in its internal write cycle from a - * previous write. This write operation was ignored and must be - *repeated later. - */ - if (status & LBCIF_STATUS_ACK_ERROR) { - /* This could be due to an actual hardware failure - * or the EEPROM may still be in its internal write - * cycle from a previous write. This write operation - * was ignored and must be repeated later. - */ - udelay(10); - continue; - } - - writeok = 1; - break; - } - - udelay(10); - - while (1) { - if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE)) - writeok = 0; - - /* Do read until internal ACK_ERROR goes away meaning write - * completed - */ - do { - pci_write_config_dword(pdev, - LBCIF_ADDRESS_REGISTER, - addr); - do { - pci_read_config_dword(pdev, - LBCIF_DATA_REGISTER, - &val); - } while ((val & 0x00010000) == 0); - } while (val & 0x00040000); - - if ((val & 0xFF00) != 0xC000 || index == 10000) - break; - index++; - } - return writeok ? 0 : -EIO; -} - -static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata) -{ - struct pci_dev *pdev = adapter->pdev; - int err; - u32 status; - - /* A single byte read is similar to the single byte write, with the - * exception of the data flow: - */ - err = eeprom_wait_ready(pdev, NULL); - if (err < 0) - return err; - /* Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0, - * and bits 1:0 both =0. Bit 5 should be set according to the type - * of EEPROM being accessed (1=two byte addressing, 0=one byte - * addressing). - */ - if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE)) - return -EIO; - /* Write the address to the LBCIF Address Register (I2C read will - * begin). - */ - if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) - return -EIO; - /* Monitor bit 0 of the LBCIF Status Register. When = 1, I2C read - * is complete. (if bit 1 =1 and bit 0 stays = 0, a hardware failure - * has occurred). - */ - err = eeprom_wait_ready(pdev, &status); - if (err < 0) - return err; - /* Regardless of error status, read data byte from LBCIF Data - * Register. - */ - *pdata = err; - - return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0; -} - -static int et131x_init_eeprom(struct et131x_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - u8 eestatus; - - pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus); - - /* THIS IS A WORKAROUND: - * I need to call this function twice to get my card in a - * LG M1 Express Dual running. I tried also a msleep before this - * function, because I thought there could be some time conditions - * but it didn't work. Call the whole function twice also work. - */ - if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) { - dev_err(&pdev->dev, - "Could not read PCI config space for EEPROM Status\n"); - return -EIO; - } - - /* Determine if the error(s) we care about are present. If they are - * present we need to fail. - */ - if (eestatus & 0x4C) { - int write_failed = 0; - - if (pdev->revision == 0x01) { - int i; - static const u8 eedata[4] = { 0xFE, 0x13, 0x10, 0xFF }; - - /* Re-write the first 4 bytes if we have an eeprom - * present and the revision id is 1, this fixes the - * corruption seen with 1310 B Silicon - */ - for (i = 0; i < 3; i++) - if (eeprom_write(adapter, i, eedata[i]) < 0) - write_failed = 1; - } - if (pdev->revision != 0x01 || write_failed) { - dev_err(&pdev->dev, - "Fatal EEPROM Status Error - 0x%04x\n", - eestatus); - - /* This error could mean that there was an error - * reading the eeprom or that the eeprom doesn't exist. - * We will treat each case the same and not try to - * gather additional information that normally would - * come from the eeprom, like MAC Address - */ - adapter->has_eeprom = 0; - return -EIO; - } - } - adapter->has_eeprom = 1; - - /* Read the EEPROM for information regarding LED behavior. Refer to - * et131x_xcvr_init() for its use. - */ - eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]); - eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]); - - if (adapter->eeprom_data[0] != 0xcd) - /* Disable all optional features */ - adapter->eeprom_data[1] = 0x00; - - return 0; -} - -static void et131x_rx_dma_enable(struct et131x_adapter *adapter) -{ - /* Setup the receive dma configuration register for normal operation */ - u32 csr = ET_RXDMA_CSR_FBR1_ENABLE; - struct rx_ring *rx_ring = &adapter->rx_ring; - - if (rx_ring->fbr[1]->buffsize == 4096) - csr |= ET_RXDMA_CSR_FBR1_SIZE_LO; - else if (rx_ring->fbr[1]->buffsize == 8192) - csr |= ET_RXDMA_CSR_FBR1_SIZE_HI; - else if (rx_ring->fbr[1]->buffsize == 16384) - csr |= ET_RXDMA_CSR_FBR1_SIZE_LO | ET_RXDMA_CSR_FBR1_SIZE_HI; - - csr |= ET_RXDMA_CSR_FBR0_ENABLE; - if (rx_ring->fbr[0]->buffsize == 256) - csr |= ET_RXDMA_CSR_FBR0_SIZE_LO; - else if (rx_ring->fbr[0]->buffsize == 512) - csr |= ET_RXDMA_CSR_FBR0_SIZE_HI; - else if (rx_ring->fbr[0]->buffsize == 1024) - csr |= ET_RXDMA_CSR_FBR0_SIZE_LO | ET_RXDMA_CSR_FBR0_SIZE_HI; - writel(csr, &adapter->regs->rxdma.csr); - - csr = readl(&adapter->regs->rxdma.csr); - if (csr & ET_RXDMA_CSR_HALT_STATUS) { - udelay(5); - csr = readl(&adapter->regs->rxdma.csr); - if (csr & ET_RXDMA_CSR_HALT_STATUS) { - dev_err(&adapter->pdev->dev, - "RX Dma failed to exit halt state. CSR 0x%08x\n", - csr); - } - } -} - -static void et131x_rx_dma_disable(struct et131x_adapter *adapter) -{ - u32 csr; - /* Setup the receive dma configuration register */ - writel(ET_RXDMA_CSR_HALT | ET_RXDMA_CSR_FBR1_ENABLE, - &adapter->regs->rxdma.csr); - csr = readl(&adapter->regs->rxdma.csr); - if (!(csr & ET_RXDMA_CSR_HALT_STATUS)) { - udelay(5); - csr = readl(&adapter->regs->rxdma.csr); - if (!(csr & ET_RXDMA_CSR_HALT_STATUS)) - dev_err(&adapter->pdev->dev, - "RX Dma failed to enter halt state. CSR 0x%08x\n", - csr); - } -} - -static void et131x_tx_dma_enable(struct et131x_adapter *adapter) -{ - /* Setup the transmit dma configuration register for normal - * operation - */ - writel(ET_TXDMA_SNGL_EPKT | (PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), - &adapter->regs->txdma.csr); -} - -static inline void add_10bit(u32 *v, int n) -{ - *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP); -} - -static inline void add_12bit(u32 *v, int n) -{ - *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP); -} - -static void et1310_config_mac_regs1(struct et131x_adapter *adapter) -{ - struct mac_regs __iomem *macregs = &adapter->regs->mac; - u32 station1; - u32 station2; - u32 ipg; - - /* First we need to reset everything. Write to MAC configuration - * register 1 to perform reset. - */ - writel(ET_MAC_CFG1_SOFT_RESET | ET_MAC_CFG1_SIM_RESET | - ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | - ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC, - ¯egs->cfg1); - - /* Next lets configure the MAC Inter-packet gap register */ - ipg = 0x38005860; /* IPG1 0x38 IPG2 0x58 B2B 0x60 */ - ipg |= 0x50 << 8; /* ifg enforce 0x50 */ - writel(ipg, ¯egs->ipg); - - /* Next lets configure the MAC Half Duplex register */ - /* BEB trunc 0xA, Ex Defer, Rexmit 0xF Coll 0x37 */ - writel(0x00A1F037, ¯egs->hfdp); - - /* Next lets configure the MAC Interface Control register */ - writel(0, ¯egs->if_ctrl); - - writel(ET_MAC_MIIMGMT_CLK_RST, ¯egs->mii_mgmt_cfg); - - /* Next lets configure the MAC Station Address register. These - * values are read from the EEPROM during initialization and stored - * in the adapter structure. We write what is stored in the adapter - * structure to the MAC Station Address registers high and low. This - * station address is used for generating and checking pause control - * packets. - */ - station2 = (adapter->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) | - (adapter->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT); - station1 = (adapter->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) | - (adapter->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) | - (adapter->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) | - adapter->addr[2]; - writel(station1, ¯egs->station_addr_1); - writel(station2, ¯egs->station_addr_2); - - /* Max ethernet packet in bytes that will be passed by the mac without - * being truncated. Allow the MAC to pass 4 more than our max packet - * size. This is 4 for the Ethernet CRC. - * - * Packets larger than (registry_jumbo_packet) that do not contain a - * VLAN ID will be dropped by the Rx function. - */ - writel(adapter->registry_jumbo_packet + 4, ¯egs->max_fm_len); - - /* clear out MAC config reset */ - writel(0, ¯egs->cfg1); -} - -static void et1310_config_mac_regs2(struct et131x_adapter *adapter) -{ - int32_t delay = 0; - struct mac_regs __iomem *mac = &adapter->regs->mac; - struct phy_device *phydev = adapter->phydev; - u32 cfg1; - u32 cfg2; - u32 ifctrl; - u32 ctl; - - ctl = readl(&adapter->regs->txmac.ctl); - cfg1 = readl(&mac->cfg1); - cfg2 = readl(&mac->cfg2); - ifctrl = readl(&mac->if_ctrl); - - /* Set up the if mode bits */ - cfg2 &= ~ET_MAC_CFG2_IFMODE_MASK; - if (phydev->speed == SPEED_1000) { - cfg2 |= ET_MAC_CFG2_IFMODE_1000; - ifctrl &= ~ET_MAC_IFCTRL_PHYMODE; - } else { - cfg2 |= ET_MAC_CFG2_IFMODE_100; - ifctrl |= ET_MAC_IFCTRL_PHYMODE; - } - - cfg1 |= ET_MAC_CFG1_RX_ENABLE | ET_MAC_CFG1_TX_ENABLE | - ET_MAC_CFG1_TX_FLOW; - - cfg1 &= ~(ET_MAC_CFG1_LOOPBACK | ET_MAC_CFG1_RX_FLOW); - if (adapter->flow == FLOW_RXONLY || adapter->flow == FLOW_BOTH) - cfg1 |= ET_MAC_CFG1_RX_FLOW; - writel(cfg1, &mac->cfg1); - - /* Now we need to initialize the MAC Configuration 2 register */ - /* preamble 7, check length, huge frame off, pad crc, crc enable - * full duplex off - */ - cfg2 |= 0x7 << ET_MAC_CFG2_PREAMBLE_SHIFT; - cfg2 |= ET_MAC_CFG2_IFMODE_LEN_CHECK; - cfg2 |= ET_MAC_CFG2_IFMODE_PAD_CRC; - cfg2 |= ET_MAC_CFG2_IFMODE_CRC_ENABLE; - cfg2 &= ~ET_MAC_CFG2_IFMODE_HUGE_FRAME; - cfg2 &= ~ET_MAC_CFG2_IFMODE_FULL_DPLX; - - if (phydev->duplex == DUPLEX_FULL) - cfg2 |= ET_MAC_CFG2_IFMODE_FULL_DPLX; - - ifctrl &= ~ET_MAC_IFCTRL_GHDMODE; - if (phydev->duplex == DUPLEX_HALF) - ifctrl |= ET_MAC_IFCTRL_GHDMODE; - - writel(ifctrl, &mac->if_ctrl); - writel(cfg2, &mac->cfg2); - - do { - udelay(10); - delay++; - cfg1 = readl(&mac->cfg1); - } while ((cfg1 & ET_MAC_CFG1_WAIT) != ET_MAC_CFG1_WAIT && delay < 100); - - if (delay == 100) { - dev_warn(&adapter->pdev->dev, - "Syncd bits did not respond correctly cfg1 word 0x%08x\n", - cfg1); - } - - ctl |= ET_TX_CTRL_TXMAC_ENABLE | ET_TX_CTRL_FC_DISABLE; - writel(ctl, &adapter->regs->txmac.ctl); - - if (adapter->flags & FMP_ADAPTER_LOWER_POWER) { - et131x_rx_dma_enable(adapter); - et131x_tx_dma_enable(adapter); - } -} - -static int et1310_in_phy_coma(struct et131x_adapter *adapter) -{ - u32 pmcsr = readl(&adapter->regs->global.pm_csr); - - return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0; -} - -static void et1310_setup_device_for_multicast(struct et131x_adapter *adapter) -{ - struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; - u32 hash1 = 0; - u32 hash2 = 0; - u32 hash3 = 0; - u32 hash4 = 0; - u32 pm_csr; - - /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision - * the multi-cast LIST. If it is NOT specified, (and "ALL" is not - * specified) then we should pass NO multi-cast addresses to the - * driver. - */ - if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) { - int i; - - /* Loop through our multicast array and set up the device */ - for (i = 0; i < adapter->multicast_addr_count; i++) { - u32 result; - - result = ether_crc(6, adapter->multicast_list[i]); - - result = (result & 0x3F800000) >> 23; - - if (result < 32) { - hash1 |= (1 << result); - } else if ((31 < result) && (result < 64)) { - result -= 32; - hash2 |= (1 << result); - } else if ((63 < result) && (result < 96)) { - result -= 64; - hash3 |= (1 << result); - } else { - result -= 96; - hash4 |= (1 << result); - } - } - } - - /* Write out the new hash to the device */ - pm_csr = readl(&adapter->regs->global.pm_csr); - if (!et1310_in_phy_coma(adapter)) { - writel(hash1, &rxmac->multi_hash1); - writel(hash2, &rxmac->multi_hash2); - writel(hash3, &rxmac->multi_hash3); - writel(hash4, &rxmac->multi_hash4); - } -} - -static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter) -{ - struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; - u32 uni_pf1; - u32 uni_pf2; - u32 uni_pf3; - u32 pm_csr; - - /* Set up unicast packet filter reg 3 to be the first two octets of - * the MAC address for both address - * - * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the - * MAC address for second address - * - * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the - * MAC address for first address - */ - uni_pf3 = (adapter->addr[0] << ET_RX_UNI_PF_ADDR2_1_SHIFT) | - (adapter->addr[1] << ET_RX_UNI_PF_ADDR2_2_SHIFT) | - (adapter->addr[0] << ET_RX_UNI_PF_ADDR1_1_SHIFT) | - adapter->addr[1]; - - uni_pf2 = (adapter->addr[2] << ET_RX_UNI_PF_ADDR2_3_SHIFT) | - (adapter->addr[3] << ET_RX_UNI_PF_ADDR2_4_SHIFT) | - (adapter->addr[4] << ET_RX_UNI_PF_ADDR2_5_SHIFT) | - adapter->addr[5]; - - uni_pf1 = (adapter->addr[2] << ET_RX_UNI_PF_ADDR1_3_SHIFT) | - (adapter->addr[3] << ET_RX_UNI_PF_ADDR1_4_SHIFT) | - (adapter->addr[4] << ET_RX_UNI_PF_ADDR1_5_SHIFT) | - adapter->addr[5]; - - pm_csr = readl(&adapter->regs->global.pm_csr); - if (!et1310_in_phy_coma(adapter)) { - writel(uni_pf1, &rxmac->uni_pf_addr1); - writel(uni_pf2, &rxmac->uni_pf_addr2); - writel(uni_pf3, &rxmac->uni_pf_addr3); - } -} - -static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) -{ - struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; - struct phy_device *phydev = adapter->phydev; - u32 sa_lo; - u32 sa_hi = 0; - u32 pf_ctrl = 0; - u32 __iomem *wolw; - - /* Disable the MAC while it is being configured (also disable WOL) */ - writel(0x8, &rxmac->ctrl); - - /* Initialize WOL to disabled. */ - writel(0, &rxmac->crc0); - writel(0, &rxmac->crc12); - writel(0, &rxmac->crc34); - - /* We need to set the WOL mask0 - mask4 next. We initialize it to - * its default Values of 0x00000000 because there are not WOL masks - * as of this time. - */ - for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) - writel(0, wolw); - - /* Lets setup the WOL Source Address */ - sa_lo = (adapter->addr[2] << ET_RX_WOL_LO_SA3_SHIFT) | - (adapter->addr[3] << ET_RX_WOL_LO_SA4_SHIFT) | - (adapter->addr[4] << ET_RX_WOL_LO_SA5_SHIFT) | - adapter->addr[5]; - writel(sa_lo, &rxmac->sa_lo); - - sa_hi = (u32)(adapter->addr[0] << ET_RX_WOL_HI_SA1_SHIFT) | - adapter->addr[1]; - writel(sa_hi, &rxmac->sa_hi); - - /* Disable all Packet Filtering */ - writel(0, &rxmac->pf_ctrl); - - /* Let's initialize the Unicast Packet filtering address */ - if (adapter->packet_filter & ET131X_PACKET_TYPE_DIRECTED) { - et1310_setup_device_for_unicast(adapter); - pf_ctrl |= ET_RX_PFCTRL_UNICST_FILTER_ENABLE; - } else { - writel(0, &rxmac->uni_pf_addr1); - writel(0, &rxmac->uni_pf_addr2); - writel(0, &rxmac->uni_pf_addr3); - } - - /* Let's initialize the Multicast hash */ - if (!(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { - pf_ctrl |= ET_RX_PFCTRL_MLTCST_FILTER_ENABLE; - et1310_setup_device_for_multicast(adapter); - } - - /* Runt packet filtering. Didn't work in version A silicon. */ - pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << ET_RX_PFCTRL_MIN_PKT_SZ_SHIFT; - pf_ctrl |= ET_RX_PFCTRL_FRAG_FILTER_ENABLE; - - if (adapter->registry_jumbo_packet > 8192) - /* In order to transmit jumbo packets greater than 8k, the - * FIFO between RxMAC and RxDMA needs to be reduced in size - * to (16k - Jumbo packet size). In order to implement this, - * we must use "cut through" mode in the RxMAC, which chops - * packets down into segments which are (max_size * 16). In - * this case we selected 256 bytes, since this is the size of - * the PCI-Express TLP's that the 1310 uses. - * - * seg_en on, fc_en off, size 0x10 - */ - writel(0x41, &rxmac->mcif_ctrl_max_seg); - else - writel(0, &rxmac->mcif_ctrl_max_seg); - - writel(0, &rxmac->mcif_water_mark); - writel(0, &rxmac->mif_ctrl); - writel(0, &rxmac->space_avail); - - /* Initialize the the mif_ctrl register - * bit 3: Receive code error. One or more nibbles were signaled as - * errors during the reception of the packet. Clear this - * bit in Gigabit, set it in 100Mbit. This was derived - * experimentally at UNH. - * bit 4: Receive CRC error. The packet's CRC did not match the - * internally generated CRC. - * bit 5: Receive length check error. Indicates that frame length - * field value in the packet does not match the actual data - * byte length and is not a type field. - * bit 16: Receive frame truncated. - * bit 17: Drop packet enable - */ - if (phydev && phydev->speed == SPEED_100) - writel(0x30038, &rxmac->mif_ctrl); - else - writel(0x30030, &rxmac->mif_ctrl); - - /* Finally we initialize RxMac to be enabled & WOL disabled. Packet - * filter is always enabled since it is where the runt packets are - * supposed to be dropped. For version A silicon, runt packet - * dropping doesn't work, so it is disabled in the pf_ctrl register, - * but we still leave the packet filter on. - */ - writel(pf_ctrl, &rxmac->pf_ctrl); - writel(ET_RX_CTRL_RXMAC_ENABLE | ET_RX_CTRL_WOL_DISABLE, &rxmac->ctrl); -} - -static void et1310_config_txmac_regs(struct et131x_adapter *adapter) -{ - struct txmac_regs __iomem *txmac = &adapter->regs->txmac; - - /* We need to update the Control Frame Parameters - * cfpt - control frame pause timer set to 64 (0x40) - * cfep - control frame extended pause timer set to 0x0 - */ - if (adapter->flow == FLOW_NONE) - writel(0, &txmac->cf_param); - else - writel(0x40, &txmac->cf_param); -} - -static void et1310_config_macstat_regs(struct et131x_adapter *adapter) -{ - struct macstat_regs __iomem *macstat = &adapter->regs->macstat; - u32 __iomem *reg; - - /* initialize all the macstat registers to zero on the device */ - for (reg = &macstat->txrx_0_64_byte_frames; - reg <= &macstat->carry_reg2; reg++) - writel(0, reg); - - /* Unmask any counters that we want to track the overflow of. - * Initially this will be all counters. It may become clear later - * that we do not need to track all counters. - */ - writel(0xFFFFBE32, &macstat->carry_reg1_mask); - writel(0xFFFE7E8B, &macstat->carry_reg2_mask); -} - -static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, - u8 reg, u16 *value) -{ - struct mac_regs __iomem *mac = &adapter->regs->mac; - int status = 0; - u32 delay = 0; - u32 mii_addr; - u32 mii_cmd; - u32 mii_indicator; - - /* Save a local copy of the registers we are dealing with so we can - * set them back - */ - mii_addr = readl(&mac->mii_mgmt_addr); - mii_cmd = readl(&mac->mii_mgmt_cmd); - - /* Stop the current operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* Set up the register we need to read from on the correct PHY */ - writel(ET_MAC_MII_ADDR(addr, reg), &mac->mii_mgmt_addr); - - writel(0x1, &mac->mii_mgmt_cmd); - - do { - udelay(50); - delay++; - mii_indicator = readl(&mac->mii_mgmt_indicator); - } while ((mii_indicator & ET_MAC_MGMT_WAIT) && delay < 50); - - /* If we hit the max delay, we could not read the register */ - if (delay == 50) { - dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be read\n", reg); - dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); - - status = -EIO; - goto out; - } - - /* If we hit here we were able to read the register and we need to - * return the value to the caller - */ - *value = readl(&mac->mii_mgmt_stat) & ET_MAC_MIIMGMT_STAT_PHYCRTL_MASK; - -out: - /* Stop the read operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* set the registers we touched back to the state at which we entered - * this function - */ - writel(mii_addr, &mac->mii_mgmt_addr); - writel(mii_cmd, &mac->mii_mgmt_cmd); - - return status; -} - -static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) -{ - struct phy_device *phydev = adapter->phydev; - - if (!phydev) - return -EIO; - - return et131x_phy_mii_read(adapter, phydev->addr, reg, value); -} - -static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg, - u16 value) -{ - struct mac_regs __iomem *mac = &adapter->regs->mac; - int status = 0; - u32 delay = 0; - u32 mii_addr; - u32 mii_cmd; - u32 mii_indicator; - - /* Save a local copy of the registers we are dealing with so we can - * set them back - */ - mii_addr = readl(&mac->mii_mgmt_addr); - mii_cmd = readl(&mac->mii_mgmt_cmd); - - /* Stop the current operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* Set up the register we need to write to on the correct PHY */ - writel(ET_MAC_MII_ADDR(addr, reg), &mac->mii_mgmt_addr); - - /* Add the value to write to the registers to the mac */ - writel(value, &mac->mii_mgmt_ctrl); - - do { - udelay(50); - delay++; - mii_indicator = readl(&mac->mii_mgmt_indicator); - } while ((mii_indicator & ET_MAC_MGMT_BUSY) && delay < 100); - - /* If we hit the max delay, we could not write the register */ - if (delay == 100) { - u16 tmp; - - dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be written", reg); - dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); - dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", - readl(&mac->mii_mgmt_cmd)); - - et131x_mii_read(adapter, reg, &tmp); - - status = -EIO; - } - /* Stop the write operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* set the registers we touched back to the state at which we entered - * this function - */ - writel(mii_addr, &mac->mii_mgmt_addr); - writel(mii_cmd, &mac->mii_mgmt_cmd); - - return status; -} - -static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter, - u16 regnum, - u16 bitnum, - u8 *value) -{ - u16 reg; - u16 mask = 1 << bitnum; - - et131x_mii_read(adapter, regnum, ®); - - *value = (reg & mask) >> bitnum; -} - -static void et1310_config_flow_control(struct et131x_adapter *adapter) -{ - struct phy_device *phydev = adapter->phydev; - - if (phydev->duplex == DUPLEX_HALF) { - adapter->flow = FLOW_NONE; - } else { - char remote_pause, remote_async_pause; - - et1310_phy_read_mii_bit(adapter, 5, 10, &remote_pause); - et1310_phy_read_mii_bit(adapter, 5, 11, &remote_async_pause); - - if (remote_pause && remote_async_pause) { - adapter->flow = adapter->wanted_flow; - } else if (remote_pause && !remote_async_pause) { - if (adapter->wanted_flow == FLOW_BOTH) - adapter->flow = FLOW_BOTH; - else - adapter->flow = FLOW_NONE; - } else if (!remote_pause && !remote_async_pause) { - adapter->flow = FLOW_NONE; - } else { - if (adapter->wanted_flow == FLOW_BOTH) - adapter->flow = FLOW_RXONLY; - else - adapter->flow = FLOW_NONE; - } - } -} - -/* et1310_update_macstat_host_counters - Update local copy of the statistics */ -static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter) -{ - struct ce_stats *stats = &adapter->stats; - struct macstat_regs __iomem *macstat = - &adapter->regs->macstat; - - stats->tx_collisions += readl(&macstat->tx_total_collisions); - stats->tx_first_collisions += readl(&macstat->tx_single_collisions); - stats->tx_deferred += readl(&macstat->tx_deferred); - stats->tx_excessive_collisions += - readl(&macstat->tx_multiple_collisions); - stats->tx_late_collisions += readl(&macstat->tx_late_collisions); - stats->tx_underflows += readl(&macstat->tx_undersize_frames); - stats->tx_max_pkt_errs += readl(&macstat->tx_oversize_frames); - - stats->rx_align_errs += readl(&macstat->rx_align_errs); - stats->rx_crc_errs += readl(&macstat->rx_code_errs); - stats->rcvd_pkts_dropped += readl(&macstat->rx_drops); - stats->rx_overflows += readl(&macstat->rx_oversize_packets); - stats->rx_code_violations += readl(&macstat->rx_fcs_errs); - stats->rx_length_errs += readl(&macstat->rx_frame_len_errs); - stats->rx_other_errs += readl(&macstat->rx_fragment_packets); -} - -/* et1310_handle_macstat_interrupt - * - * One of the MACSTAT counters has wrapped. Update the local copy of - * the statistics held in the adapter structure, checking the "wrap" - * bit for each counter. - */ -static void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter) -{ - u32 carry_reg1; - u32 carry_reg2; - - /* Read the interrupt bits from the register(s). These are Clear On - * Write. - */ - carry_reg1 = readl(&adapter->regs->macstat.carry_reg1); - carry_reg2 = readl(&adapter->regs->macstat.carry_reg2); - - writel(carry_reg1, &adapter->regs->macstat.carry_reg1); - writel(carry_reg2, &adapter->regs->macstat.carry_reg2); - - /* We need to do update the host copy of all the MAC_STAT counters. - * For each counter, check it's overflow bit. If the overflow bit is - * set, then increment the host version of the count by one complete - * revolution of the counter. This routine is called when the counter - * block indicates that one of the counters has wrapped. - */ - if (carry_reg1 & (1 << 14)) - adapter->stats.rx_code_violations += COUNTER_WRAP_16_BIT; - if (carry_reg1 & (1 << 8)) - adapter->stats.rx_align_errs += COUNTER_WRAP_12_BIT; - if (carry_reg1 & (1 << 7)) - adapter->stats.rx_length_errs += COUNTER_WRAP_16_BIT; - if (carry_reg1 & (1 << 2)) - adapter->stats.rx_other_errs += COUNTER_WRAP_16_BIT; - if (carry_reg1 & (1 << 6)) - adapter->stats.rx_crc_errs += COUNTER_WRAP_16_BIT; - if (carry_reg1 & (1 << 3)) - adapter->stats.rx_overflows += COUNTER_WRAP_16_BIT; - if (carry_reg1 & (1 << 0)) - adapter->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT; - if (carry_reg2 & (1 << 16)) - adapter->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 15)) - adapter->stats.tx_underflows += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 6)) - adapter->stats.tx_first_collisions += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 8)) - adapter->stats.tx_deferred += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 5)) - adapter->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 4)) - adapter->stats.tx_late_collisions += COUNTER_WRAP_12_BIT; - if (carry_reg2 & (1 << 2)) - adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT; -} - -static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg) -{ - struct net_device *netdev = bus->priv; - struct et131x_adapter *adapter = netdev_priv(netdev); - u16 value; - int ret; - - ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value); - - if (ret < 0) - return ret; - - return value; -} - -static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, - int reg, u16 value) -{ - struct net_device *netdev = bus->priv; - struct et131x_adapter *adapter = netdev_priv(netdev); - - return et131x_mii_write(adapter, phy_addr, reg, value); -} - -/* et1310_phy_power_switch - PHY power control - * @adapter: device to control - * @down: true for off/false for back on - * - * one hundred, ten, one thousand megs - * How would you like to have your LAN accessed - * Can't you see that this code processed - * Phy power, phy power.. - */ -static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) -{ - u16 data; - struct phy_device *phydev = adapter->phydev; - - et131x_mii_read(adapter, MII_BMCR, &data); - data &= ~BMCR_PDOWN; - if (down) - data |= BMCR_PDOWN; - et131x_mii_write(adapter, phydev->addr, MII_BMCR, data); -} - -/* et131x_xcvr_init - Init the phy if we are setting it into force mode */ -static void et131x_xcvr_init(struct et131x_adapter *adapter) -{ - u16 lcr2; - struct phy_device *phydev = adapter->phydev; - - /* Set the LED behavior such that LED 1 indicates speed (off = - * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates - * link and activity (on for link, blink off for activity). - * - * NOTE: Some customizations have been added here for specific - * vendors; The LED behavior is now determined by vendor data in the - * EEPROM. However, the above description is the default. - */ - if ((adapter->eeprom_data[1] & 0x4) == 0) { - et131x_mii_read(adapter, PHY_LED_2, &lcr2); - - lcr2 &= (ET_LED2_LED_100TX | ET_LED2_LED_1000T); - lcr2 |= (LED_VAL_LINKON_ACTIVE << LED_LINK_SHIFT); - - if ((adapter->eeprom_data[1] & 0x8) == 0) - lcr2 |= (LED_VAL_1000BT_100BTX << LED_TXRX_SHIFT); - else - lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT); - - et131x_mii_write(adapter, phydev->addr, PHY_LED_2, lcr2); - } -} - -/* et131x_configure_global_regs - configure JAGCore global regs */ -static void et131x_configure_global_regs(struct et131x_adapter *adapter) -{ - struct global_regs __iomem *regs = &adapter->regs->global; - - writel(0, ®s->rxq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - - if (adapter->registry_jumbo_packet < 2048) { - /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word - * block of RAM that the driver can split between Tx - * and Rx as it desires. Our default is to split it - * 50/50: - */ - writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); - writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); - } else if (adapter->registry_jumbo_packet < 8192) { - /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); - writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); - } else { - /* 9216 is the only packet size greater than 8k that - * is available. The Tx buffer has to be big enough - * for one whole packet on the Tx side. We'll make - * the Tx 9408, and give the rest to Rx - */ - writel(0x01b3, ®s->rxq_end_addr); - writel(0x01b4, ®s->txq_start_addr); - } - - /* Initialize the loopback register. Disable all loopbacks. */ - writel(0, ®s->loopback); - - writel(0, ®s->msi_config); - - /* By default, disable the watchdog timer. It will be enabled when - * a packet is queued. - */ - writel(0, ®s->watchdog_timer); -} - -/* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence */ -static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) -{ - struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; - struct rx_ring *rx_local = &adapter->rx_ring; - struct fbr_desc *fbr_entry; - u32 entry; - u32 psr_num_des; - unsigned long flags; - u8 id; - - et131x_rx_dma_disable(adapter); - - /* Load the completion writeback physical address */ - writel(upper_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_hi); - writel(lower_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_lo); - - memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block)); - - /* Set the address and parameters of the packet status ring */ - writel(upper_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_hi); - writel(lower_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_lo); - writel(rx_local->psr_entries - 1, &rx_dma->psr_num_des); - writel(0, &rx_dma->psr_full_offset); - - psr_num_des = readl(&rx_dma->psr_num_des) & ET_RXDMA_PSR_NUM_DES_MASK; - writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100, - &rx_dma->psr_min_des); - - spin_lock_irqsave(&adapter->rcv_lock, flags); - - /* These local variables track the PSR in the adapter structure */ - rx_local->local_psr_full = 0; - - for (id = 0; id < NUM_FBRS; id++) { - u32 __iomem *num_des; - u32 __iomem *full_offset; - u32 __iomem *min_des; - u32 __iomem *base_hi; - u32 __iomem *base_lo; - struct fbr_lookup *fbr = rx_local->fbr[id]; - - if (id == 0) { - num_des = &rx_dma->fbr0_num_des; - full_offset = &rx_dma->fbr0_full_offset; - min_des = &rx_dma->fbr0_min_des; - base_hi = &rx_dma->fbr0_base_hi; - base_lo = &rx_dma->fbr0_base_lo; - } else { - num_des = &rx_dma->fbr1_num_des; - full_offset = &rx_dma->fbr1_full_offset; - min_des = &rx_dma->fbr1_min_des; - base_hi = &rx_dma->fbr1_base_hi; - base_lo = &rx_dma->fbr1_base_lo; - } - - /* Now's the best time to initialize FBR contents */ - fbr_entry = fbr->ring_virtaddr; - for (entry = 0; entry < fbr->num_entries; entry++) { - fbr_entry->addr_hi = fbr->bus_high[entry]; - fbr_entry->addr_lo = fbr->bus_low[entry]; - fbr_entry->word2 = entry; - fbr_entry++; - } - - /* Set the address and parameters of Free buffer ring 1 and 0 */ - writel(upper_32_bits(fbr->ring_physaddr), base_hi); - writel(lower_32_bits(fbr->ring_physaddr), base_lo); - writel(fbr->num_entries - 1, num_des); - writel(ET_DMA10_WRAP, full_offset); - - /* This variable tracks the free buffer ring 1 full position, - * so it has to match the above. - */ - fbr->local_full = ET_DMA10_WRAP; - writel(((fbr->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, - min_des); - } - - /* Program the number of packets we will receive before generating an - * interrupt. - * For version B silicon, this value gets updated once autoneg is - *complete. - */ - writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done); - - /* The "time_done" is not working correctly to coalesce interrupts - * after a given time period, but rather is giving us an interrupt - * regardless of whether we have received packets. - * This value gets updated once autoneg is complete. - */ - writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time); - - spin_unlock_irqrestore(&adapter->rcv_lock, flags); -} - -/* et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore. - * - * Configure the transmit engine with the ring buffers we have created - * and prepare it for use. - */ -static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter) -{ - struct txdma_regs __iomem *txdma = &adapter->regs->txdma; - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* Load the hardware with the start of the transmit descriptor ring. */ - writel(upper_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_hi); - writel(lower_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_lo); - - /* Initialise the transmit DMA engine */ - writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des); - - /* Load the completion writeback physical address */ - writel(upper_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_hi); - writel(lower_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_lo); - - *tx_ring->tx_status = 0; - - writel(0, &txdma->service_request); - tx_ring->send_idx = 0; -} - -/* et131x_adapter_setup - Set the adapter up as per cassini+ documentation */ -static void et131x_adapter_setup(struct et131x_adapter *adapter) -{ - et131x_configure_global_regs(adapter); - et1310_config_mac_regs1(adapter); - - /* Configure the MMC registers */ - /* All we need to do is initialize the Memory Control Register */ - writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl); - - et1310_config_rxmac_regs(adapter); - et1310_config_txmac_regs(adapter); - - et131x_config_rx_dma_regs(adapter); - et131x_config_tx_dma_regs(adapter); - - et1310_config_macstat_regs(adapter); - - et1310_phy_power_switch(adapter, 0); - et131x_xcvr_init(adapter); -} - -/* et131x_soft_reset - Issue soft reset to the hardware, complete for ET1310 */ -static void et131x_soft_reset(struct et131x_adapter *adapter) -{ - u32 reg; - - /* Disable MAC Core */ - reg = ET_MAC_CFG1_SOFT_RESET | ET_MAC_CFG1_SIM_RESET | - ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | - ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC; - writel(reg, &adapter->regs->mac.cfg1); - - reg = ET_RESET_ALL; - writel(reg, &adapter->regs->global.sw_reset); - - reg = ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | - ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC; - writel(reg, &adapter->regs->mac.cfg1); - writel(0, &adapter->regs->mac.cfg1); -} - -static void et131x_enable_interrupts(struct et131x_adapter *adapter) -{ - u32 mask; - - if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) - mask = INT_MASK_ENABLE; - else - mask = INT_MASK_ENABLE_NO_FLOW; - - writel(mask, &adapter->regs->global.int_mask); -} - -static void et131x_disable_interrupts(struct et131x_adapter *adapter) -{ - writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); -} - -static void et131x_tx_dma_disable(struct et131x_adapter *adapter) -{ - /* Setup the transmit dma configuration register */ - writel(ET_TXDMA_CSR_HALT | ET_TXDMA_SNGL_EPKT, - &adapter->regs->txdma.csr); -} - -static void et131x_enable_txrx(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - et131x_rx_dma_enable(adapter); - et131x_tx_dma_enable(adapter); - - if (adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE) - et131x_enable_interrupts(adapter); - - netif_start_queue(netdev); -} - -static void et131x_disable_txrx(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - netif_stop_queue(netdev); - - et131x_rx_dma_disable(adapter); - et131x_tx_dma_disable(adapter); - - et131x_disable_interrupts(adapter); -} - -static void et131x_init_send(struct et131x_adapter *adapter) -{ - int i; - struct tx_ring *tx_ring = &adapter->tx_ring; - struct tcb *tcb = tx_ring->tcb_ring; - - tx_ring->tcb_qhead = tcb; - - memset(tcb, 0, sizeof(struct tcb) * NUM_TCB); - - for (i = 0; i < NUM_TCB; i++) { - tcb->next = tcb + 1; - tcb++; - } - - tcb--; - tx_ring->tcb_qtail = tcb; - tcb->next = NULL; - /* Curr send queue should now be empty */ - tx_ring->send_head = NULL; - tx_ring->send_tail = NULL; -} - -/* et1310_enable_phy_coma - * - * driver receive an phy status change interrupt while in D0 and check that - * phy_status is down. - * - * -- gate off JAGCore; - * -- set gigE PHY in Coma mode - * -- wake on phy_interrupt; Perform software reset JAGCore, - * re-initialize jagcore and gigE PHY - */ -static void et1310_enable_phy_coma(struct et131x_adapter *adapter) -{ - u32 pmcsr = readl(&adapter->regs->global.pm_csr); - - /* Stop sending packets. */ - adapter->flags |= FMP_ADAPTER_LOWER_POWER; - - /* Wait for outstanding Receive packets */ - et131x_disable_txrx(adapter->netdev); - - /* Gate off JAGCore 3 clock domains */ - pmcsr &= ~ET_PMCSR_INIT; - writel(pmcsr, &adapter->regs->global.pm_csr); - - /* Program gigE PHY in to Coma mode */ - pmcsr |= ET_PM_PHY_SW_COMA; - writel(pmcsr, &adapter->regs->global.pm_csr); -} - -static void et1310_disable_phy_coma(struct et131x_adapter *adapter) -{ - u32 pmcsr; - - pmcsr = readl(&adapter->regs->global.pm_csr); - - /* Disable phy_sw_coma register and re-enable JAGCore clocks */ - pmcsr |= ET_PMCSR_INIT; - pmcsr &= ~ET_PM_PHY_SW_COMA; - writel(pmcsr, &adapter->regs->global.pm_csr); - - /* Restore the GbE PHY speed and duplex modes; - * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY - */ - - /* Re-initialize the send structures */ - et131x_init_send(adapter); - - /* Bring the device back to the state it was during init prior to - * autonegotiation being complete. This way, when we get the auto-neg - * complete interrupt, we can complete init by calling ConfigMacREGS2. - */ - et131x_soft_reset(adapter); - - et131x_adapter_setup(adapter); - - /* Allow Tx to restart */ - adapter->flags &= ~FMP_ADAPTER_LOWER_POWER; - - et131x_enable_txrx(adapter->netdev); -} - -static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit) -{ - u32 tmp_free_buff_ring = *free_buff_ring; - - tmp_free_buff_ring++; - /* This works for all cases where limit < 1024. The 1023 case - * works because 1023++ is 1024 which means the if condition is not - * taken but the carry of the bit into the wrap bit toggles the wrap - * value correctly - */ - if ((tmp_free_buff_ring & ET_DMA10_MASK) > limit) { - tmp_free_buff_ring &= ~ET_DMA10_MASK; - tmp_free_buff_ring ^= ET_DMA10_WRAP; - } - /* For the 1023 case */ - tmp_free_buff_ring &= (ET_DMA10_MASK | ET_DMA10_WRAP); - *free_buff_ring = tmp_free_buff_ring; - return tmp_free_buff_ring; -} - -/* et131x_rx_dma_memory_alloc - * - * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required, - * and the Packet Status Ring. - */ -static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) -{ - u8 id; - u32 i, j; - u32 bufsize; - u32 psr_size; - u32 fbr_chunksize; - struct rx_ring *rx_ring = &adapter->rx_ring; - struct fbr_lookup *fbr; - - /* Alloc memory for the lookup table */ - rx_ring->fbr[0] = kzalloc(sizeof(*fbr), GFP_KERNEL); - if (rx_ring->fbr[0] == NULL) - return -ENOMEM; - rx_ring->fbr[1] = kzalloc(sizeof(*fbr), GFP_KERNEL); - if (rx_ring->fbr[1] == NULL) - return -ENOMEM; - - /* The first thing we will do is configure the sizes of the buffer - * rings. These will change based on jumbo packet support. Larger - * jumbo packets increases the size of each entry in FBR0, and the - * number of entries in FBR0, while at the same time decreasing the - * number of entries in FBR1. - * - * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1 - * entries are huge in order to accommodate a "jumbo" frame, then it - * will have less entries. Conversely, FBR1 will now be relied upon - * to carry more "normal" frames, thus it's entry size also increases - * and the number of entries goes up too (since it now carries - * "small" + "regular" packets. - * - * In this scheme, we try to maintain 512 entries between the two - * rings. Also, FBR1 remains a constant size - when it's size doubles - * the number of entries halves. FBR0 increases in size, however. - */ - if (adapter->registry_jumbo_packet < 2048) { - rx_ring->fbr[0]->buffsize = 256; - rx_ring->fbr[0]->num_entries = 512; - rx_ring->fbr[1]->buffsize = 2048; - rx_ring->fbr[1]->num_entries = 512; - } else if (adapter->registry_jumbo_packet < 4096) { - rx_ring->fbr[0]->buffsize = 512; - rx_ring->fbr[0]->num_entries = 1024; - rx_ring->fbr[1]->buffsize = 4096; - rx_ring->fbr[1]->num_entries = 512; - } else { - rx_ring->fbr[0]->buffsize = 1024; - rx_ring->fbr[0]->num_entries = 768; - rx_ring->fbr[1]->buffsize = 16384; - rx_ring->fbr[1]->num_entries = 128; - } - - rx_ring->psr_entries = rx_ring->fbr[0]->num_entries + - rx_ring->fbr[1]->num_entries; - - for (id = 0; id < NUM_FBRS; id++) { - fbr = rx_ring->fbr[id]; - /* Allocate an area of memory for Free Buffer Ring */ - bufsize = sizeof(struct fbr_desc) * fbr->num_entries; - fbr->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, - bufsize, - &fbr->ring_physaddr, - GFP_KERNEL); - if (!fbr->ring_virtaddr) { - dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Free Buffer Ring %d\n", - id); - return -ENOMEM; - } - } - - for (id = 0; id < NUM_FBRS; id++) { - fbr = rx_ring->fbr[id]; - fbr_chunksize = (FBR_CHUNKS * fbr->buffsize); - - for (i = 0; i < fbr->num_entries / FBR_CHUNKS; i++) { - dma_addr_t fbr_physaddr; - - fbr->mem_virtaddrs[i] = dma_alloc_coherent( - &adapter->pdev->dev, fbr_chunksize, - &fbr->mem_physaddrs[i], - GFP_KERNEL); - - if (!fbr->mem_virtaddrs[i]) { - dev_err(&adapter->pdev->dev, - "Could not alloc memory\n"); - return -ENOMEM; - } - - /* See NOTE in "Save Physical Address" comment above */ - fbr_physaddr = fbr->mem_physaddrs[i]; - - for (j = 0; j < FBR_CHUNKS; j++) { - u32 k = (i * FBR_CHUNKS) + j; - - /* Save the Virtual address of this index for - * quick access later - */ - fbr->virt[k] = (u8 *)fbr->mem_virtaddrs[i] + - (j * fbr->buffsize); - - /* now store the physical address in the - * descriptor so the device can access it - */ - fbr->bus_high[k] = upper_32_bits(fbr_physaddr); - fbr->bus_low[k] = lower_32_bits(fbr_physaddr); - fbr_physaddr += fbr->buffsize; - } - } - } - - /* Allocate an area of memory for FIFO of Packet Status ring entries */ - psr_size = sizeof(struct pkt_stat_desc) * rx_ring->psr_entries; - - rx_ring->ps_ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, - psr_size, - &rx_ring->ps_ring_physaddr, - GFP_KERNEL); - - if (!rx_ring->ps_ring_virtaddr) { - dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Packet Status Ring\n"); - return -ENOMEM; - } - - /* Allocate an area of memory for writeback of status information */ - rx_ring->rx_status_block = dma_alloc_coherent(&adapter->pdev->dev, - sizeof(struct rx_status_block), - &rx_ring->rx_status_bus, - GFP_KERNEL); - if (!rx_ring->rx_status_block) { - dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Status Block\n"); - return -ENOMEM; - } - rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD; - - /* The RFDs are going to be put on lists later on, so initialize the - * lists now. - */ - INIT_LIST_HEAD(&rx_ring->recv_list); - return 0; -} - -static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) -{ - u8 id; - u32 ii; - u32 bufsize; - u32 psr_size; - struct rfd *rfd; - struct rx_ring *rx_ring = &adapter->rx_ring; - struct fbr_lookup *fbr; - - /* Free RFDs and associated packet descriptors */ - WARN_ON(rx_ring->num_ready_recv != rx_ring->num_rfd); - - while (!list_empty(&rx_ring->recv_list)) { - rfd = list_entry(rx_ring->recv_list.next, - struct rfd, list_node); - - list_del(&rfd->list_node); - rfd->skb = NULL; - kfree(rfd); - } - - /* Free Free Buffer Rings */ - for (id = 0; id < NUM_FBRS; id++) { - fbr = rx_ring->fbr[id]; - - if (!fbr || !fbr->ring_virtaddr) - continue; - - /* First the packet memory */ - for (ii = 0; ii < fbr->num_entries / FBR_CHUNKS; ii++) { - if (fbr->mem_virtaddrs[ii]) { - bufsize = fbr->buffsize * FBR_CHUNKS; - - dma_free_coherent(&adapter->pdev->dev, - bufsize, - fbr->mem_virtaddrs[ii], - fbr->mem_physaddrs[ii]); - - fbr->mem_virtaddrs[ii] = NULL; - } - } - - bufsize = sizeof(struct fbr_desc) * fbr->num_entries; - - dma_free_coherent(&adapter->pdev->dev, - bufsize, - fbr->ring_virtaddr, - fbr->ring_physaddr); - - fbr->ring_virtaddr = NULL; - } - - /* Free Packet Status Ring */ - if (rx_ring->ps_ring_virtaddr) { - psr_size = sizeof(struct pkt_stat_desc) * rx_ring->psr_entries; - - dma_free_coherent(&adapter->pdev->dev, psr_size, - rx_ring->ps_ring_virtaddr, - rx_ring->ps_ring_physaddr); - - rx_ring->ps_ring_virtaddr = NULL; - } - - /* Free area of memory for the writeback of status information */ - if (rx_ring->rx_status_block) { - dma_free_coherent(&adapter->pdev->dev, - sizeof(struct rx_status_block), - rx_ring->rx_status_block, - rx_ring->rx_status_bus); - rx_ring->rx_status_block = NULL; - } - - /* Free the FBR Lookup Table */ - kfree(rx_ring->fbr[0]); - kfree(rx_ring->fbr[1]); - - /* Reset Counters */ - rx_ring->num_ready_recv = 0; -} - -/* et131x_init_recv - Initialize receive data structures */ -static int et131x_init_recv(struct et131x_adapter *adapter) -{ - struct rfd *rfd; - u32 rfdct; - struct rx_ring *rx_ring = &adapter->rx_ring; - - /* Setup each RFD */ - for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) { - rfd = kzalloc(sizeof(*rfd), GFP_ATOMIC | GFP_DMA); - if (!rfd) - return -ENOMEM; - - rfd->skb = NULL; - - /* Add this RFD to the recv_list */ - list_add_tail(&rfd->list_node, &rx_ring->recv_list); - - /* Increment the available RFD's */ - rx_ring->num_ready_recv++; - } - - return 0; -} - -/* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate */ -static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) -{ - struct phy_device *phydev = adapter->phydev; - - /* For version B silicon, we do not use the RxDMA timer for 10 and 100 - * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. - */ - if ((phydev->speed == SPEED_100) || (phydev->speed == SPEED_10)) { - writel(0, &adapter->regs->rxdma.max_pkt_time); - writel(1, &adapter->regs->rxdma.num_pkt_done); - } -} - -/* nic_return_rfd - Recycle a RFD and put it back onto the receive list */ -static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) -{ - struct rx_ring *rx_local = &adapter->rx_ring; - struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; - u16 buff_index = rfd->bufferindex; - u8 ring_index = rfd->ringindex; - unsigned long flags; - struct fbr_lookup *fbr = rx_local->fbr[ring_index]; - - /* We don't use any of the OOB data besides status. Otherwise, we - * need to clean up OOB data - */ - if (buff_index < fbr->num_entries) { - u32 free_buff_ring; - u32 __iomem *offset; - struct fbr_desc *next; - - if (ring_index == 0) - offset = &rx_dma->fbr0_full_offset; - else - offset = &rx_dma->fbr1_full_offset; - - next = (struct fbr_desc *)(fbr->ring_virtaddr) + - INDEX10(fbr->local_full); - - /* Handle the Free Buffer Ring advancement here. Write - * the PA / Buffer Index for the returned buffer into - * the oldest (next to be freed)FBR entry - */ - next->addr_hi = fbr->bus_high[buff_index]; - next->addr_lo = fbr->bus_low[buff_index]; - next->word2 = buff_index; - - free_buff_ring = bump_free_buff_ring(&fbr->local_full, - fbr->num_entries - 1); - writel(free_buff_ring, offset); - } else { - dev_err(&adapter->pdev->dev, - "%s illegal Buffer Index returned\n", __func__); - } - - /* The processing on this RFD is done, so put it back on the tail of - * our list - */ - spin_lock_irqsave(&adapter->rcv_lock, flags); - list_add_tail(&rfd->list_node, &rx_local->recv_list); - rx_local->num_ready_recv++; - spin_unlock_irqrestore(&adapter->rcv_lock, flags); - - WARN_ON(rx_local->num_ready_recv > rx_local->num_rfd); -} - -/* nic_rx_pkts - Checks the hardware for available packets - * - * Checks the hardware for available packets, using completion ring - * If packets are available, it gets an RFD from the recv_list, attaches - * the packet to it, puts the RFD in the RecvPendList, and also returns - * the pointer to the RFD. - */ -static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) -{ - struct rx_ring *rx_local = &adapter->rx_ring; - struct rx_status_block *status; - struct pkt_stat_desc *psr; - struct rfd *rfd; - unsigned long flags; - struct list_head *element; - u8 ring_index; - u16 buff_index; - u32 len; - u32 word0; - u32 word1; - struct sk_buff *skb; - struct fbr_lookup *fbr; - - /* RX Status block is written by the DMA engine prior to every - * interrupt. It contains the next to be used entry in the Packet - * Status Ring, and also the two Free Buffer rings. - */ - status = rx_local->rx_status_block; - word1 = status->word1 >> 16; - - /* Check the PSR and wrap bits do not match */ - if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF)) - return NULL; /* Looks like this ring is not updated yet */ - - /* The packet status ring indicates that data is available. */ - psr = (struct pkt_stat_desc *)(rx_local->ps_ring_virtaddr) + - (rx_local->local_psr_full & 0xFFF); - - /* Grab any information that is required once the PSR is advanced, - * since we can no longer rely on the memory being accurate - */ - len = psr->word1 & 0xFFFF; - ring_index = (psr->word1 >> 26) & 0x03; - fbr = rx_local->fbr[ring_index]; - buff_index = (psr->word1 >> 16) & 0x3FF; - word0 = psr->word0; - - /* Indicate that we have used this PSR entry. */ - /* FIXME wrap 12 */ - add_12bit(&rx_local->local_psr_full, 1); - if ((rx_local->local_psr_full & 0xFFF) > rx_local->psr_entries - 1) { - /* Clear psr full and toggle the wrap bit */ - rx_local->local_psr_full &= ~0xFFF; - rx_local->local_psr_full ^= 0x1000; - } - - writel(rx_local->local_psr_full, &adapter->regs->rxdma.psr_full_offset); - - if (ring_index > 1 || buff_index > fbr->num_entries - 1) { - /* Illegal buffer or ring index cannot be used by S/W*/ - dev_err(&adapter->pdev->dev, - "NICRxPkts PSR Entry %d indicates length of %d and/or bad bi(%d)\n", - rx_local->local_psr_full & 0xFFF, len, buff_index); - return NULL; - } - - /* Get and fill the RFD. */ - spin_lock_irqsave(&adapter->rcv_lock, flags); - - element = rx_local->recv_list.next; - rfd = list_entry(element, struct rfd, list_node); - - if (!rfd) { - spin_unlock_irqrestore(&adapter->rcv_lock, flags); - return NULL; - } - - list_del(&rfd->list_node); - rx_local->num_ready_recv--; - - spin_unlock_irqrestore(&adapter->rcv_lock, flags); - - rfd->bufferindex = buff_index; - rfd->ringindex = ring_index; - - /* In V1 silicon, there is a bug which screws up filtering of runt - * packets. Therefore runt packet filtering is disabled in the MAC and - * the packets are dropped here. They are also counted here. - */ - if (len < (NIC_MIN_PACKET_SIZE + 4)) { - adapter->stats.rx_other_errs++; - rfd->len = 0; - goto out; - } - - if ((word0 & ALCATEL_MULTICAST_PKT) && !(word0 & ALCATEL_BROADCAST_PKT)) - adapter->stats.multicast_pkts_rcvd++; - - rfd->len = len; - - skb = dev_alloc_skb(rfd->len + 2); - if (!skb) - return NULL; - - adapter->netdev->stats.rx_bytes += rfd->len; - - memcpy(skb_put(skb, rfd->len), fbr->virt[buff_index], rfd->len); - - skb->protocol = eth_type_trans(skb, adapter->netdev); - skb->ip_summed = CHECKSUM_NONE; - netif_receive_skb(skb); - -out: - nic_return_rfd(adapter, rfd); - return rfd; -} - -static int et131x_handle_recv_pkts(struct et131x_adapter *adapter, int budget) -{ - struct rfd *rfd = NULL; - int count = 0; - int limit = budget; - bool done = true; - struct rx_ring *rx_ring = &adapter->rx_ring; - - if (budget > MAX_PACKETS_HANDLED) - limit = MAX_PACKETS_HANDLED; - - /* Process up to available RFD's */ - while (count < limit) { - if (list_empty(&rx_ring->recv_list)) { - WARN_ON(rx_ring->num_ready_recv != 0); - done = false; - break; - } - - rfd = nic_rx_pkts(adapter); - - if (rfd == NULL) - break; - - /* Do not receive any packets until a filter has been set. - * Do not receive any packets until we have link. - * If length is zero, return the RFD in order to advance the - * Free buffer ring. - */ - if (!adapter->packet_filter || - !netif_carrier_ok(adapter->netdev) || - rfd->len == 0) - continue; - - adapter->netdev->stats.rx_packets++; - - if (rx_ring->num_ready_recv < RFD_LOW_WATER_MARK) - dev_warn(&adapter->pdev->dev, "RFD's are running out\n"); - - count++; - } - - if (count == limit || !done) { - rx_ring->unfinished_receives = true; - writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, - &adapter->regs->global.watchdog_timer); - } else { - /* Watchdog timer will disable itself if appropriate. */ - rx_ring->unfinished_receives = false; - } - - return count; -} - -/* et131x_tx_dma_memory_alloc - * - * Allocates memory that will be visible both to the device and to the CPU. - * The OS will pass us packets, pointers to which we will insert in the Tx - * Descriptor queue. The device will read this queue to find the packets in - * memory. The device will update the "status" in memory each time it xmits a - * packet. - */ -static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) -{ - int desc_size = 0; - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* Allocate memory for the TCB's (Transmit Control Block) */ - tx_ring->tcb_ring = kcalloc(NUM_TCB, sizeof(struct tcb), - GFP_ATOMIC | GFP_DMA); - if (!tx_ring->tcb_ring) - return -ENOMEM; - - desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); - tx_ring->tx_desc_ring = dma_alloc_coherent(&adapter->pdev->dev, - desc_size, - &tx_ring->tx_desc_ring_pa, - GFP_KERNEL); - if (!tx_ring->tx_desc_ring) { - dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Tx Ring\n"); - return -ENOMEM; - } - - tx_ring->tx_status = dma_alloc_coherent(&adapter->pdev->dev, - sizeof(u32), - &tx_ring->tx_status_pa, - GFP_KERNEL); - if (!tx_ring->tx_status_pa) { - dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Tx status block\n"); - return -ENOMEM; - } - return 0; -} - -static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) -{ - int desc_size = 0; - struct tx_ring *tx_ring = &adapter->tx_ring; - - if (tx_ring->tx_desc_ring) { - /* Free memory relating to Tx rings here */ - desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); - dma_free_coherent(&adapter->pdev->dev, - desc_size, - tx_ring->tx_desc_ring, - tx_ring->tx_desc_ring_pa); - tx_ring->tx_desc_ring = NULL; - } - - /* Free memory for the Tx status block */ - if (tx_ring->tx_status) { - dma_free_coherent(&adapter->pdev->dev, - sizeof(u32), - tx_ring->tx_status, - tx_ring->tx_status_pa); - - tx_ring->tx_status = NULL; - } - /* Free the memory for the tcb structures */ - kfree(tx_ring->tcb_ring); -} - -/* nic_send_packet - NIC specific send handler for version B silicon. */ -static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) -{ - u32 i; - struct tx_desc desc[24]; - u32 frag = 0; - u32 thiscopy, remainder; - struct sk_buff *skb = tcb->skb; - u32 nr_frags = skb_shinfo(skb)->nr_frags + 1; - struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0]; - struct phy_device *phydev = adapter->phydev; - dma_addr_t dma_addr; - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* Part of the optimizations of this send routine restrict us to - * sending 24 fragments at a pass. In practice we should never see - * more than 5 fragments. - */ - - /* nr_frags should be no more than 18. */ - BUILD_BUG_ON(MAX_SKB_FRAGS + 1 > 23); - - memset(desc, 0, sizeof(struct tx_desc) * (nr_frags + 1)); - - for (i = 0; i < nr_frags; i++) { - /* If there is something in this element, lets get a - * descriptor from the ring and get the necessary data - */ - if (i == 0) { - /* If the fragments are smaller than a standard MTU, - * then map them to a single descriptor in the Tx - * Desc ring. However, if they're larger, as is - * possible with support for jumbo packets, then - * split them each across 2 descriptors. - * - * This will work until we determine why the hardware - * doesn't seem to like large fragments. - */ - if (skb_headlen(skb) <= 1514) { - /* Low 16bits are length, high is vlan and - * unused currently so zero - */ - desc[frag].len_vlan = skb_headlen(skb); - dma_addr = dma_map_single(&adapter->pdev->dev, - skb->data, - skb_headlen(skb), - DMA_TO_DEVICE); - desc[frag].addr_lo = lower_32_bits(dma_addr); - desc[frag].addr_hi = upper_32_bits(dma_addr); - frag++; - } else { - desc[frag].len_vlan = skb_headlen(skb) / 2; - dma_addr = dma_map_single(&adapter->pdev->dev, - skb->data, - skb_headlen(skb) / 2, - DMA_TO_DEVICE); - desc[frag].addr_lo = lower_32_bits(dma_addr); - desc[frag].addr_hi = upper_32_bits(dma_addr); - frag++; - - desc[frag].len_vlan = skb_headlen(skb) / 2; - dma_addr = dma_map_single(&adapter->pdev->dev, - skb->data + - skb_headlen(skb) / 2, - skb_headlen(skb) / 2, - DMA_TO_DEVICE); - desc[frag].addr_lo = lower_32_bits(dma_addr); - desc[frag].addr_hi = upper_32_bits(dma_addr); - frag++; - } - } else { - desc[frag].len_vlan = frags[i - 1].size; - dma_addr = skb_frag_dma_map(&adapter->pdev->dev, - &frags[i - 1], - 0, - frags[i - 1].size, - DMA_TO_DEVICE); - desc[frag].addr_lo = lower_32_bits(dma_addr); - desc[frag].addr_hi = upper_32_bits(dma_addr); - frag++; - } - } - - if (phydev && phydev->speed == SPEED_1000) { - if (++tx_ring->since_irq == PARM_TX_NUM_BUFS_DEF) { - /* Last element & Interrupt flag */ - desc[frag - 1].flags = - TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; - tx_ring->since_irq = 0; - } else { /* Last element */ - desc[frag - 1].flags = TXDESC_FLAG_LASTPKT; - } - } else { - desc[frag - 1].flags = - TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; - } - - desc[0].flags |= TXDESC_FLAG_FIRSTPKT; - - tcb->index_start = tx_ring->send_idx; - tcb->stale = 0; - - thiscopy = NUM_DESC_PER_RING_TX - INDEX10(tx_ring->send_idx); - - if (thiscopy >= frag) { - remainder = 0; - thiscopy = frag; - } else { - remainder = frag - thiscopy; - } - - memcpy(tx_ring->tx_desc_ring + INDEX10(tx_ring->send_idx), - desc, - sizeof(struct tx_desc) * thiscopy); - - add_10bit(&tx_ring->send_idx, thiscopy); - - if (INDEX10(tx_ring->send_idx) == 0 || - INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) { - tx_ring->send_idx &= ~ET_DMA10_MASK; - tx_ring->send_idx ^= ET_DMA10_WRAP; - } - - if (remainder) { - memcpy(tx_ring->tx_desc_ring, - desc + thiscopy, - sizeof(struct tx_desc) * remainder); - - add_10bit(&tx_ring->send_idx, remainder); - } - - if (INDEX10(tx_ring->send_idx) == 0) { - if (tx_ring->send_idx) - tcb->index = NUM_DESC_PER_RING_TX - 1; - else - tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1); - } else { - tcb->index = tx_ring->send_idx - 1; - } - - spin_lock(&adapter->tcb_send_qlock); - - if (tx_ring->send_tail) - tx_ring->send_tail->next = tcb; - else - tx_ring->send_head = tcb; - - tx_ring->send_tail = tcb; - - WARN_ON(tcb->next != NULL); - - tx_ring->used++; - - spin_unlock(&adapter->tcb_send_qlock); - - /* Write the new write pointer back to the device. */ - writel(tx_ring->send_idx, &adapter->regs->txdma.service_request); - - /* For Gig only, we use Tx Interrupt coalescing. Enable the software - * timer to wake us up if this packet isn't followed by N more. - */ - if (phydev && phydev->speed == SPEED_1000) { - writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, - &adapter->regs->global.watchdog_timer); - } - return 0; -} - -static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) -{ - int status; - struct tcb *tcb; - unsigned long flags; - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* All packets must have at least a MAC address and a protocol type */ - if (skb->len < ETH_HLEN) - return -EIO; - - spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - - tcb = tx_ring->tcb_qhead; - - if (tcb == NULL) { - spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); - return -ENOMEM; - } - - tx_ring->tcb_qhead = tcb->next; - - if (tx_ring->tcb_qhead == NULL) - tx_ring->tcb_qtail = NULL; - - spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); - - tcb->skb = skb; - tcb->next = NULL; - - status = nic_send_packet(adapter, tcb); - - if (status != 0) { - spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - - if (tx_ring->tcb_qtail) - tx_ring->tcb_qtail->next = tcb; - else - /* Apparently ready Q is empty. */ - tx_ring->tcb_qhead = tcb; - - tx_ring->tcb_qtail = tcb; - spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); - return status; - } - WARN_ON(tx_ring->used > NUM_TCB); - return 0; -} - -/* free_send_packet - Recycle a struct tcb */ -static inline void free_send_packet(struct et131x_adapter *adapter, - struct tcb *tcb) -{ - unsigned long flags; - struct tx_desc *desc = NULL; - struct net_device_stats *stats = &adapter->netdev->stats; - struct tx_ring *tx_ring = &adapter->tx_ring; - u64 dma_addr; - - if (tcb->skb) { - stats->tx_bytes += tcb->skb->len; - - /* Iterate through the TX descriptors on the ring - * corresponding to this packet and umap the fragments - * they point to - */ - do { - desc = tx_ring->tx_desc_ring + - INDEX10(tcb->index_start); - - dma_addr = desc->addr_lo; - dma_addr |= (u64)desc->addr_hi << 32; - - dma_unmap_single(&adapter->pdev->dev, - dma_addr, - desc->len_vlan, DMA_TO_DEVICE); - - add_10bit(&tcb->index_start, 1); - if (INDEX10(tcb->index_start) >= - NUM_DESC_PER_RING_TX) { - tcb->index_start &= ~ET_DMA10_MASK; - tcb->index_start ^= ET_DMA10_WRAP; - } - } while (desc != tx_ring->tx_desc_ring + INDEX10(tcb->index)); - - dev_kfree_skb_any(tcb->skb); - } - - memset(tcb, 0, sizeof(struct tcb)); - - /* Add the TCB to the Ready Q */ - spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - - stats->tx_packets++; - - if (tx_ring->tcb_qtail) - tx_ring->tcb_qtail->next = tcb; - else /* Apparently ready Q is empty. */ - tx_ring->tcb_qhead = tcb; - - tx_ring->tcb_qtail = tcb; - - spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); - WARN_ON(tx_ring->used < 0); -} - -/* et131x_free_busy_send_packets - Free and complete the stopped active sends */ -static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) -{ - struct tcb *tcb; - unsigned long flags; - u32 freed = 0; - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* Any packets being sent? Check the first TCB on the send list */ - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - - tcb = tx_ring->send_head; - - while (tcb != NULL && freed < NUM_TCB) { - struct tcb *next = tcb->next; - - tx_ring->send_head = next; - - if (next == NULL) - tx_ring->send_tail = NULL; - - tx_ring->used--; - - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - - freed++; - free_send_packet(adapter, tcb); - - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - - tcb = tx_ring->send_head; - } - - WARN_ON(freed == NUM_TCB); - - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - - tx_ring->used = 0; -} - -/* et131x_handle_send_pkts - * - * Re-claim the send resources, complete sends and get more to send from - * the send wait queue. - */ -static void et131x_handle_send_pkts(struct et131x_adapter *adapter) -{ - unsigned long flags; - u32 serviced; - struct tcb *tcb; - u32 index; - struct tx_ring *tx_ring = &adapter->tx_ring; - - serviced = readl(&adapter->regs->txdma.new_service_complete); - index = INDEX10(serviced); - - /* Has the ring wrapped? Process any descriptors that do not have - * the same "wrap" indicator as the current completion indicator - */ - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - - tcb = tx_ring->send_head; - - while (tcb && - ((serviced ^ tcb->index) & ET_DMA10_WRAP) && - index < INDEX10(tcb->index)) { - tx_ring->used--; - tx_ring->send_head = tcb->next; - if (tcb->next == NULL) - tx_ring->send_tail = NULL; - - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - free_send_packet(adapter, tcb); - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - - /* Goto the next packet */ - tcb = tx_ring->send_head; - } - while (tcb && - !((serviced ^ tcb->index) & ET_DMA10_WRAP) && - index > (tcb->index & ET_DMA10_MASK)) { - tx_ring->used--; - tx_ring->send_head = tcb->next; - if (tcb->next == NULL) - tx_ring->send_tail = NULL; - - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - free_send_packet(adapter, tcb); - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - - /* Goto the next packet */ - tcb = tx_ring->send_head; - } - - /* Wake up the queue when we hit a low-water mark */ - if (tx_ring->used <= NUM_TCB / 3) - netif_wake_queue(adapter->netdev); - - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); -} - -static int et131x_get_settings(struct net_device *netdev, - struct ethtool_cmd *cmd) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - return phy_ethtool_gset(adapter->phydev, cmd); -} - -static int et131x_set_settings(struct net_device *netdev, - struct ethtool_cmd *cmd) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - return phy_ethtool_sset(adapter->phydev, cmd); -} - -static int et131x_get_regs_len(struct net_device *netdev) -{ -#define ET131X_REGS_LEN 256 - return ET131X_REGS_LEN * sizeof(u32); -} - -static void et131x_get_regs(struct net_device *netdev, - struct ethtool_regs *regs, void *regs_data) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct address_map __iomem *aregs = adapter->regs; - u32 *regs_buff = regs_data; - u32 num = 0; - u16 tmp; - - memset(regs_data, 0, et131x_get_regs_len(netdev)); - - regs->version = (1 << 24) | (adapter->pdev->revision << 16) | - adapter->pdev->device; - - /* PHY regs */ - et131x_mii_read(adapter, MII_BMCR, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_BMSR, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_PHYSID1, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_PHYSID2, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_ADVERTISE, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_LPA, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_EXPANSION, &tmp); - regs_buff[num++] = tmp; - /* Autoneg next page transmit reg */ - et131x_mii_read(adapter, 0x07, &tmp); - regs_buff[num++] = tmp; - /* Link partner next page reg */ - et131x_mii_read(adapter, 0x08, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_CTRL1000, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_STAT1000, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, 0x0b, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, 0x0c, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_MMD_CTRL, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_MMD_DATA, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, MII_ESTATUS, &tmp); - regs_buff[num++] = tmp; - - et131x_mii_read(adapter, PHY_INDEX_REG, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_DATA_REG, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL + 1, &tmp); - regs_buff[num++] = tmp; - - et131x_mii_read(adapter, PHY_REGISTER_MGMT_CONTROL, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_CONFIG, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_PHY_CONTROL, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_INTERRUPT_MASK, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_INTERRUPT_STATUS, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_PHY_STATUS, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_LED_1, &tmp); - regs_buff[num++] = tmp; - et131x_mii_read(adapter, PHY_LED_2, &tmp); - regs_buff[num++] = tmp; - - /* Global regs */ - regs_buff[num++] = readl(&aregs->global.txq_start_addr); - regs_buff[num++] = readl(&aregs->global.txq_end_addr); - regs_buff[num++] = readl(&aregs->global.rxq_start_addr); - regs_buff[num++] = readl(&aregs->global.rxq_end_addr); - regs_buff[num++] = readl(&aregs->global.pm_csr); - regs_buff[num++] = adapter->stats.interrupt_status; - regs_buff[num++] = readl(&aregs->global.int_mask); - regs_buff[num++] = readl(&aregs->global.int_alias_clr_en); - regs_buff[num++] = readl(&aregs->global.int_status_alias); - regs_buff[num++] = readl(&aregs->global.sw_reset); - regs_buff[num++] = readl(&aregs->global.slv_timer); - regs_buff[num++] = readl(&aregs->global.msi_config); - regs_buff[num++] = readl(&aregs->global.loopback); - regs_buff[num++] = readl(&aregs->global.watchdog_timer); - - /* TXDMA regs */ - regs_buff[num++] = readl(&aregs->txdma.csr); - regs_buff[num++] = readl(&aregs->txdma.pr_base_hi); - regs_buff[num++] = readl(&aregs->txdma.pr_base_lo); - regs_buff[num++] = readl(&aregs->txdma.pr_num_des); - regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr); - regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr_ext); - regs_buff[num++] = readl(&aregs->txdma.txq_rd_addr); - regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_hi); - regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_lo); - regs_buff[num++] = readl(&aregs->txdma.service_request); - regs_buff[num++] = readl(&aregs->txdma.service_complete); - regs_buff[num++] = readl(&aregs->txdma.cache_rd_index); - regs_buff[num++] = readl(&aregs->txdma.cache_wr_index); - regs_buff[num++] = readl(&aregs->txdma.tx_dma_error); - regs_buff[num++] = readl(&aregs->txdma.desc_abort_cnt); - regs_buff[num++] = readl(&aregs->txdma.payload_abort_cnt); - regs_buff[num++] = readl(&aregs->txdma.writeback_abort_cnt); - regs_buff[num++] = readl(&aregs->txdma.desc_timeout_cnt); - regs_buff[num++] = readl(&aregs->txdma.payload_timeout_cnt); - regs_buff[num++] = readl(&aregs->txdma.writeback_timeout_cnt); - regs_buff[num++] = readl(&aregs->txdma.desc_error_cnt); - regs_buff[num++] = readl(&aregs->txdma.payload_error_cnt); - regs_buff[num++] = readl(&aregs->txdma.writeback_error_cnt); - regs_buff[num++] = readl(&aregs->txdma.dropped_tlp_cnt); - regs_buff[num++] = readl(&aregs->txdma.new_service_complete); - regs_buff[num++] = readl(&aregs->txdma.ethernet_packet_cnt); - - /* RXDMA regs */ - regs_buff[num++] = readl(&aregs->rxdma.csr); - regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_hi); - regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_lo); - regs_buff[num++] = readl(&aregs->rxdma.num_pkt_done); - regs_buff[num++] = readl(&aregs->rxdma.max_pkt_time); - regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr); - regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr_ext); - regs_buff[num++] = readl(&aregs->rxdma.rxq_wr_addr); - regs_buff[num++] = readl(&aregs->rxdma.psr_base_hi); - regs_buff[num++] = readl(&aregs->rxdma.psr_base_lo); - regs_buff[num++] = readl(&aregs->rxdma.psr_num_des); - regs_buff[num++] = readl(&aregs->rxdma.psr_avail_offset); - regs_buff[num++] = readl(&aregs->rxdma.psr_full_offset); - regs_buff[num++] = readl(&aregs->rxdma.psr_access_index); - regs_buff[num++] = readl(&aregs->rxdma.psr_min_des); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_lo); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_hi); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_num_des); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_avail_offset); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_full_offset); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_rd_index); - regs_buff[num++] = readl(&aregs->rxdma.fbr0_min_des); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_lo); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_hi); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_num_des); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_avail_offset); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_full_offset); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_rd_index); - regs_buff[num++] = readl(&aregs->rxdma.fbr1_min_des); -} - -static void et131x_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *info) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); - strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); - strlcpy(info->bus_info, pci_name(adapter->pdev), - sizeof(info->bus_info)); -} - -static struct ethtool_ops et131x_ethtool_ops = { - .get_settings = et131x_get_settings, - .set_settings = et131x_set_settings, - .get_drvinfo = et131x_get_drvinfo, - .get_regs_len = et131x_get_regs_len, - .get_regs = et131x_get_regs, - .get_link = ethtool_op_get_link, -}; - -/* et131x_hwaddr_init - set up the MAC Address */ -static void et131x_hwaddr_init(struct et131x_adapter *adapter) -{ - /* If have our default mac from init and no mac address from - * EEPROM then we need to generate the last octet and set it on the - * device - */ - if (is_zero_ether_addr(adapter->rom_addr)) { - /* We need to randomly generate the last octet so we - * decrease our chances of setting the mac address to - * same as another one of our cards in the system - */ - get_random_bytes(&adapter->addr[5], 1); - /* We have the default value in the register we are - * working with so we need to copy the current - * address into the permanent address - */ - ether_addr_copy(adapter->rom_addr, adapter->addr); - } else { - /* We do not have an override address, so set the - * current address to the permanent address and add - * it to the device - */ - ether_addr_copy(adapter->addr, adapter->rom_addr); - } -} - -static int et131x_pci_init(struct et131x_adapter *adapter, - struct pci_dev *pdev) -{ - u16 max_payload; - int i, rc; - - rc = et131x_init_eeprom(adapter); - if (rc < 0) - goto out; - - if (!pci_is_pcie(pdev)) { - dev_err(&pdev->dev, "Missing PCIe capabilities\n"); - goto err_out; - } - - /* Program the Ack/Nak latency and replay timers */ - max_payload = pdev->pcie_mpss; - - if (max_payload < 2) { - static const u16 acknak[2] = { 0x76, 0xD0 }; - static const u16 replay[2] = { 0x1E0, 0x2ED }; - - if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, - acknak[max_payload])) { - dev_err(&pdev->dev, - "Could not write PCI config space for ACK/NAK\n"); - goto err_out; - } - if (pci_write_config_word(pdev, ET1310_PCI_REPLAY, - replay[max_payload])) { - dev_err(&pdev->dev, - "Could not write PCI config space for Replay Timer\n"); - goto err_out; - } - } - - /* l0s and l1 latency timers. We are using default values. - * Representing 001 for L0s and 010 for L1 - */ - if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) { - dev_err(&pdev->dev, - "Could not write PCI config space for Latency Timers\n"); - goto err_out; - } - - /* Change the max read size to 2k */ - if (pcie_set_readrq(pdev, 2048)) { - dev_err(&pdev->dev, - "Couldn't change PCI config space for Max read size\n"); - goto err_out; - } - - /* Get MAC address from config space if an eeprom exists, otherwise - * the MAC address there will not be valid - */ - if (!adapter->has_eeprom) { - et131x_hwaddr_init(adapter); - return 0; - } - - for (i = 0; i < ETH_ALEN; i++) { - if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i, - adapter->rom_addr + i)) { - dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n"); - goto err_out; - } - } - ether_addr_copy(adapter->addr, adapter->rom_addr); -out: - return rc; -err_out: - rc = -EIO; - goto out; -} - -/* et131x_error_timer_handler - * @data: timer-specific variable; here a pointer to our adapter structure - * - * The routine called when the error timer expires, to track the number of - * recurring errors. - */ -static void et131x_error_timer_handler(unsigned long data) -{ - struct et131x_adapter *adapter = (struct et131x_adapter *)data; - struct phy_device *phydev = adapter->phydev; - - if (et1310_in_phy_coma(adapter)) { - /* Bring the device immediately out of coma, to - * prevent it from sleeping indefinitely, this - * mechanism could be improved! - */ - et1310_disable_phy_coma(adapter); - adapter->boot_coma = 20; - } else { - et1310_update_macstat_host_counters(adapter); - } - - if (!phydev->link && adapter->boot_coma < 11) - adapter->boot_coma++; - - if (adapter->boot_coma == 10) { - if (!phydev->link) { - if (!et1310_in_phy_coma(adapter)) { - /* NOTE - This was originally a 'sync with - * interrupt'. How to do that under Linux? - */ - et131x_enable_interrupts(adapter); - et1310_enable_phy_coma(adapter); - } - } - } - - /* This is a periodic timer, so reschedule */ - mod_timer(&adapter->error_timer, jiffies + TX_ERROR_PERIOD * HZ / 1000); -} - -static void et131x_adapter_memory_free(struct et131x_adapter *adapter) -{ - et131x_tx_dma_memory_free(adapter); - et131x_rx_dma_memory_free(adapter); -} - -static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) -{ - int status; - - status = et131x_tx_dma_memory_alloc(adapter); - if (status) { - dev_err(&adapter->pdev->dev, - "et131x_tx_dma_memory_alloc FAILED\n"); - et131x_tx_dma_memory_free(adapter); - return status; - } - - status = et131x_rx_dma_memory_alloc(adapter); - if (status) { - dev_err(&adapter->pdev->dev, - "et131x_rx_dma_memory_alloc FAILED\n"); - et131x_adapter_memory_free(adapter); - return status; - } - - status = et131x_init_recv(adapter); - if (status) { - dev_err(&adapter->pdev->dev, "et131x_init_recv FAILED\n"); - et131x_adapter_memory_free(adapter); - } - return status; -} - -static void et131x_adjust_link(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct phy_device *phydev = adapter->phydev; - - if (!phydev) - return; - if (phydev->link == adapter->link) - return; - - /* Check to see if we are in coma mode and if - * so, disable it because we will not be able - * to read PHY values until we are out. - */ - if (et1310_in_phy_coma(adapter)) - et1310_disable_phy_coma(adapter); - - adapter->link = phydev->link; - phy_print_status(phydev); - - if (phydev->link) { - adapter->boot_coma = 20; - if (phydev->speed == SPEED_10) { - u16 register18; - - et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); - et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, - register18 | 0x8402); - et131x_mii_write(adapter, phydev->addr, PHY_DATA_REG, - register18 | 511); - et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18); - } - - et1310_config_flow_control(adapter); - - if (phydev->speed == SPEED_1000 && - adapter->registry_jumbo_packet > 2048) { - u16 reg; - - et131x_mii_read(adapter, PHY_CONFIG, ®); - reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH; - reg |= ET_PHY_CONFIG_FIFO_DEPTH_32; - et131x_mii_write(adapter, phydev->addr, PHY_CONFIG, - reg); - } - - et131x_set_rx_dma_timer(adapter); - et1310_config_mac_regs2(adapter); - } else { - adapter->boot_coma = 0; - - if (phydev->speed == SPEED_10) { - u16 register18; - - et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); - et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, phydev->addr, - PHY_INDEX_REG, register18 | 0x8402); - et131x_mii_write(adapter, phydev->addr, - PHY_DATA_REG, register18 | 511); - et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18); - } - - et131x_free_busy_send_packets(adapter); - et131x_init_send(adapter); - - /* Bring the device back to the state it was during - * init prior to autonegotiation being complete. This - * way, when we get the auto-neg complete interrupt, - * we can complete init by calling config_mac_regs2. - */ - et131x_soft_reset(adapter); - - et131x_adapter_setup(adapter); - - et131x_disable_txrx(netdev); - et131x_enable_txrx(netdev); - } -} - -static int et131x_mii_probe(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct phy_device *phydev = NULL; - - phydev = phy_find_first(adapter->mii_bus); - if (!phydev) { - dev_err(&adapter->pdev->dev, "no PHY found\n"); - return -ENODEV; - } - - phydev = phy_connect(netdev, dev_name(&phydev->dev), - &et131x_adjust_link, PHY_INTERFACE_MODE_MII); - - if (IS_ERR(phydev)) { - dev_err(&adapter->pdev->dev, "Could not attach to PHY\n"); - return PTR_ERR(phydev); - } - - phydev->supported &= (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII | - SUPPORTED_TP); - - if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST) - phydev->supported |= SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full; - - phydev->advertising = phydev->supported; - phydev->autoneg = AUTONEG_ENABLE; - adapter->phydev = phydev; - - dev_info(&adapter->pdev->dev, - "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", - phydev->drv->name, dev_name(&phydev->dev)); - - return 0; -} - -static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, - struct pci_dev *pdev) -{ - static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; - - struct et131x_adapter *adapter; - - adapter = netdev_priv(netdev); - adapter->pdev = pci_dev_get(pdev); - adapter->netdev = netdev; - - spin_lock_init(&adapter->tcb_send_qlock); - spin_lock_init(&adapter->tcb_ready_qlock); - spin_lock_init(&adapter->rcv_lock); - - adapter->registry_jumbo_packet = 1514; /* 1514-9216 */ - - ether_addr_copy(adapter->addr, default_mac); - - return adapter; -} - -static void et131x_pci_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct et131x_adapter *adapter = netdev_priv(netdev); - - unregister_netdev(netdev); - netif_napi_del(&adapter->napi); - phy_disconnect(adapter->phydev); - mdiobus_unregister(adapter->mii_bus); - kfree(adapter->mii_bus->irq); - mdiobus_free(adapter->mii_bus); - - et131x_adapter_memory_free(adapter); - iounmap(adapter->regs); - pci_dev_put(pdev); - - free_netdev(netdev); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static void et131x_up(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - et131x_enable_txrx(netdev); - phy_start(adapter->phydev); -} - -static void et131x_down(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - /* Save the timestamp for the TX watchdog, prevent a timeout */ - netdev->trans_start = jiffies; - - phy_stop(adapter->phydev); - et131x_disable_txrx(netdev); -} - -#ifdef CONFIG_PM_SLEEP -static int et131x_suspend(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - - if (netif_running(netdev)) { - netif_device_detach(netdev); - et131x_down(netdev); - pci_save_state(pdev); - } - - return 0; -} - -static int et131x_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - - if (netif_running(netdev)) { - pci_restore_state(pdev); - et131x_up(netdev); - netif_device_attach(netdev); - } - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); - -static irqreturn_t et131x_isr(int irq, void *dev_id) -{ - bool handled = true; - bool enable_interrupts = true; - struct net_device *netdev = dev_id; - struct et131x_adapter *adapter = netdev_priv(netdev); - struct address_map __iomem *iomem = adapter->regs; - struct rx_ring *rx_ring = &adapter->rx_ring; - struct tx_ring *tx_ring = &adapter->tx_ring; - u32 status; - - if (!netif_device_present(netdev)) { - handled = false; - enable_interrupts = false; - goto out; - } - - et131x_disable_interrupts(adapter); - - status = readl(&adapter->regs->global.int_status); - - if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) - status &= ~INT_MASK_ENABLE; - else - status &= ~INT_MASK_ENABLE_NO_FLOW; - - /* Make sure this is our interrupt */ - if (!status) { - handled = false; - et131x_enable_interrupts(adapter); - goto out; - } - - /* This is our interrupt, so process accordingly */ - if (status & ET_INTR_WATCHDOG) { - struct tcb *tcb = tx_ring->send_head; - - if (tcb) - if (++tcb->stale > 1) - status |= ET_INTR_TXDMA_ISR; - - if (rx_ring->unfinished_receives) - status |= ET_INTR_RXDMA_XFR_DONE; - else if (tcb == NULL) - writel(0, &adapter->regs->global.watchdog_timer); - - status &= ~ET_INTR_WATCHDOG; - } - - if (status & (ET_INTR_RXDMA_XFR_DONE | ET_INTR_TXDMA_ISR)) { - enable_interrupts = false; - napi_schedule(&adapter->napi); - } - - status &= ~(ET_INTR_TXDMA_ISR | ET_INTR_RXDMA_XFR_DONE); - - if (!status) - goto out; - - if (status & ET_INTR_TXDMA_ERR) { - /* Following read also clears the register (COR) */ - u32 txdma_err = readl(&iomem->txdma.tx_dma_error); - - dev_warn(&adapter->pdev->dev, - "TXDMA_ERR interrupt, error = %d\n", - txdma_err); - } - - if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) { - /* This indicates the number of unused buffers in RXDMA free - * buffer ring 0 is <= the limit you programmed. Free buffer - * resources need to be returned. Free buffers are consumed as - * packets are passed from the network to the host. The host - * becomes aware of the packets from the contents of the packet - * status ring. This ring is queried when the packet done - * interrupt occurs. Packets are then passed to the OS. When - * the OS is done with the packets the resources can be - * returned to the ET1310 for re-use. This interrupt is one - * method of returning resources. - */ - - /* If the user has flow control on, then we will - * send a pause packet, otherwise just exit - */ - if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) { - u32 pm_csr; - - /* Tell the device to send a pause packet via the back - * pressure register (bp req and bp xon/xoff) - */ - pm_csr = readl(&iomem->global.pm_csr); - if (!et1310_in_phy_coma(adapter)) - writel(3, &iomem->txmac.bp_ctrl); - } - } - - /* Handle Packet Status Ring Low Interrupt */ - if (status & ET_INTR_RXDMA_STAT_LOW) { - /* Same idea as with the two Free Buffer Rings. Packets going - * from the network to the host each consume a free buffer - * resource and a packet status resource. These resources are - * passed to the OS. When the OS is done with the resources, - * they need to be returned to the ET1310. This is one method - * of returning the resources. - */ - } - - if (status & ET_INTR_RXDMA_ERR) { - /* The rxdma_error interrupt is sent when a time-out on a - * request issued by the JAGCore has occurred or a completion is - * returned with an un-successful status. In both cases the - * request is considered complete. The JAGCore will - * automatically re-try the request in question. Normally - * information on events like these are sent to the host using - * the "Advanced Error Reporting" capability. This interrupt is - * another way of getting similar information. The only thing - * required is to clear the interrupt by reading the ISR in the - * global resources. The JAGCore will do a re-try on the - * request. Normally you should never see this interrupt. If - * you start to see this interrupt occurring frequently then - * something bad has occurred. A reset might be the thing to do. - */ - /* TRAP();*/ - - dev_warn(&adapter->pdev->dev, "RxDMA_ERR interrupt, error %x\n", - readl(&iomem->txmac.tx_test)); - } - - /* Handle the Wake on LAN Event */ - if (status & ET_INTR_WOL) { - /* This is a secondary interrupt for wake on LAN. The driver - * should never see this, if it does, something serious is - * wrong. - */ - dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n"); - } - - if (status & ET_INTR_TXMAC) { - u32 err = readl(&iomem->txmac.err); - - /* When any of the errors occur and TXMAC generates an - * interrupt to report these errors, it usually means that - * TXMAC has detected an error in the data stream retrieved - * from the on-chip Tx Q. All of these errors are catastrophic - * and TXMAC won't be able to recover data when these errors - * occur. In a nutshell, the whole Tx path will have to be reset - * and re-configured afterwards. - */ - dev_warn(&adapter->pdev->dev, "TXMAC interrupt, error 0x%08x\n", - err); - - /* If we are debugging, we want to see this error, otherwise we - * just want the device to be reset and continue - */ - } - - if (status & ET_INTR_RXMAC) { - /* These interrupts are catastrophic to the device, what we need - * to do is disable the interrupts and set the flag to cause us - * to reset so we can solve this issue. - */ - dev_warn(&adapter->pdev->dev, - "RXMAC interrupt, error 0x%08x. Requesting reset\n", - readl(&iomem->rxmac.err_reg)); - - dev_warn(&adapter->pdev->dev, - "Enable 0x%08x, Diag 0x%08x\n", - readl(&iomem->rxmac.ctrl), - readl(&iomem->rxmac.rxq_diag)); - - /* If we are debugging, we want to see this error, otherwise we - * just want the device to be reset and continue - */ - } - - if (status & ET_INTR_MAC_STAT) { - /* This means at least one of the un-masked counters in the - * MAC_STAT block has rolled over. Use this to maintain the top, - * software managed bits of the counter(s). - */ - et1310_handle_macstat_interrupt(adapter); - } - - if (status & ET_INTR_SLV_TIMEOUT) { - /* This means a timeout has occurred on a read or write request - * to one of the JAGCore registers. The Global Resources block - * has terminated the request and on a read request, returned a - * "fake" value. The most likely reasons are: Bad Address or the - * addressed module is in a power-down state and can't respond. - */ - } - -out: - if (enable_interrupts) - et131x_enable_interrupts(adapter); - - return IRQ_RETVAL(handled); -} - -static int et131x_poll(struct napi_struct *napi, int budget) -{ - struct et131x_adapter *adapter = - container_of(napi, struct et131x_adapter, napi); - int work_done = et131x_handle_recv_pkts(adapter, budget); - - et131x_handle_send_pkts(adapter); - - if (work_done < budget) { - napi_complete(&adapter->napi); - et131x_enable_interrupts(adapter); - } - - return work_done; -} - -/* et131x_stats - Return the current device statistics */ -static struct net_device_stats *et131x_stats(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct net_device_stats *stats = &adapter->netdev->stats; - struct ce_stats *devstat = &adapter->stats; - - stats->rx_errors = devstat->rx_length_errs + - devstat->rx_align_errs + - devstat->rx_crc_errs + - devstat->rx_code_violations + - devstat->rx_other_errs; - stats->tx_errors = devstat->tx_max_pkt_errs; - stats->multicast = devstat->multicast_pkts_rcvd; - stats->collisions = devstat->tx_collisions; - - stats->rx_length_errors = devstat->rx_length_errs; - stats->rx_over_errors = devstat->rx_overflows; - stats->rx_crc_errors = devstat->rx_crc_errs; - stats->rx_dropped = devstat->rcvd_pkts_dropped; - - /* NOTE: Not used, can't find analogous statistics */ - /* stats->rx_frame_errors = devstat->; */ - /* stats->rx_fifo_errors = devstat->; */ - /* stats->rx_missed_errors = devstat->; */ - - /* stats->tx_aborted_errors = devstat->; */ - /* stats->tx_carrier_errors = devstat->; */ - /* stats->tx_fifo_errors = devstat->; */ - /* stats->tx_heartbeat_errors = devstat->; */ - /* stats->tx_window_errors = devstat->; */ - return stats; -} - -static int et131x_open(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct pci_dev *pdev = adapter->pdev; - unsigned int irq = pdev->irq; - int result; - - /* Start the timer to track NIC errors */ - init_timer(&adapter->error_timer); - adapter->error_timer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000; - adapter->error_timer.function = et131x_error_timer_handler; - adapter->error_timer.data = (unsigned long)adapter; - add_timer(&adapter->error_timer); - - result = request_irq(irq, et131x_isr, - IRQF_SHARED, netdev->name, netdev); - if (result) { - dev_err(&pdev->dev, "could not register IRQ %d\n", irq); - return result; - } - - adapter->flags |= FMP_ADAPTER_INTERRUPT_IN_USE; - - napi_enable(&adapter->napi); - - et131x_up(netdev); - - return result; -} - -static int et131x_close(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - et131x_down(netdev); - napi_disable(&adapter->napi); - - adapter->flags &= ~FMP_ADAPTER_INTERRUPT_IN_USE; - free_irq(adapter->pdev->irq, netdev); - - /* Stop the error timer */ - return del_timer_sync(&adapter->error_timer); -} - -static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, - int cmd) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - - if (!adapter->phydev) - return -EINVAL; - - return phy_mii_ioctl(adapter->phydev, reqbuf, cmd); -} - -/* et131x_set_packet_filter - Configures the Rx Packet filtering */ -static int et131x_set_packet_filter(struct et131x_adapter *adapter) -{ - int filter = adapter->packet_filter; - u32 ctrl; - u32 pf_ctrl; - - ctrl = readl(&adapter->regs->rxmac.ctrl); - pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl); - - /* Default to disabled packet filtering */ - ctrl |= 0x04; - - /* Set us to be in promiscuous mode so we receive everything, this - * is also true when we get a packet filter of 0 - */ - if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) - pf_ctrl &= ~7; /* Clear filter bits */ - else { - /* Set us up with Multicast packet filtering. Three cases are - * possible - (1) we have a multi-cast list, (2) we receive ALL - * multicast entries or (3) we receive none. - */ - if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) - pf_ctrl &= ~2; /* Multicast filter bit */ - else { - et1310_setup_device_for_multicast(adapter); - pf_ctrl |= 2; - ctrl &= ~0x04; - } - - /* Set us up with Unicast packet filtering */ - if (filter & ET131X_PACKET_TYPE_DIRECTED) { - et1310_setup_device_for_unicast(adapter); - pf_ctrl |= 4; - ctrl &= ~0x04; - } - - /* Set us up with Broadcast packet filtering */ - if (filter & ET131X_PACKET_TYPE_BROADCAST) { - pf_ctrl |= 1; /* Broadcast filter bit */ - ctrl &= ~0x04; - } else { - pf_ctrl &= ~1; - } - - /* Setup the receive mac configuration registers - Packet - * Filter control + the enable / disable for packet filter - * in the control reg. - */ - writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl); - writel(ctrl, &adapter->regs->rxmac.ctrl); - } - return 0; -} - -static void et131x_multicast(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - int packet_filter; - struct netdev_hw_addr *ha; - int i; - - /* Before we modify the platform-independent filter flags, store them - * locally. This allows us to determine if anything's changed and if - * we even need to bother the hardware - */ - packet_filter = adapter->packet_filter; - - /* Clear the 'multicast' flag locally; because we only have a single - * flag to check multicast, and multiple multicast addresses can be - * set, this is the easiest way to determine if more than one - * multicast address is being set. - */ - packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST; - - /* Check the net_device flags and set the device independent flags - * accordingly - */ - if (netdev->flags & IFF_PROMISC) - adapter->packet_filter |= ET131X_PACKET_TYPE_PROMISCUOUS; - else - adapter->packet_filter &= ~ET131X_PACKET_TYPE_PROMISCUOUS; - - if ((netdev->flags & IFF_ALLMULTI) || - (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)) - adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST; - - if (netdev_mc_count(netdev) < 1) { - adapter->packet_filter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST; - adapter->packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST; - } else { - adapter->packet_filter |= ET131X_PACKET_TYPE_MULTICAST; - } - - /* Set values in the private adapter struct */ - i = 0; - netdev_for_each_mc_addr(ha, netdev) { - if (i == NIC_MAX_MCAST_LIST) - break; - ether_addr_copy(adapter->multicast_list[i++], ha->addr); - } - adapter->multicast_addr_count = i; - - /* Are the new flags different from the previous ones? If not, then no - * action is required - * - * NOTE - This block will always update the multicast_list with the - * hardware, even if the addresses aren't the same. - */ - if (packet_filter != adapter->packet_filter) - et131x_set_packet_filter(adapter); -} - -static netdev_tx_t et131x_tx(struct sk_buff *skb, struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct tx_ring *tx_ring = &adapter->tx_ring; - - /* stop the queue if it's getting full */ - if (tx_ring->used >= NUM_TCB - 1 && !netif_queue_stopped(netdev)) - netif_stop_queue(netdev); - - /* Save the timestamp for the TX timeout watchdog */ - netdev->trans_start = jiffies; - - /* TCB is not available */ - if (tx_ring->used >= NUM_TCB) - goto drop_err; - - if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) || - !netif_carrier_ok(netdev)) - goto drop_err; - - if (send_packet(skb, adapter)) - goto drop_err; - - return NETDEV_TX_OK; - -drop_err: - dev_kfree_skb_any(skb); - adapter->netdev->stats.tx_dropped++; - return NETDEV_TX_OK; -} - -/* et131x_tx_timeout - Timeout handler - * - * The handler called when a Tx request times out. The timeout period is - * specified by the 'tx_timeo" element in the net_device structure (see - * et131x_alloc_device() to see how this value is set). - */ -static void et131x_tx_timeout(struct net_device *netdev) -{ - struct et131x_adapter *adapter = netdev_priv(netdev); - struct tx_ring *tx_ring = &adapter->tx_ring; - struct tcb *tcb; - unsigned long flags; - - /* If the device is closed, ignore the timeout */ - if (~(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)) - return; - - /* Any nonrecoverable hardware error? - * Checks adapter->flags for any failure in phy reading - */ - if (adapter->flags & FMP_ADAPTER_NON_RECOVER_ERROR) - return; - - /* Hardware failure? */ - if (adapter->flags & FMP_ADAPTER_HARDWARE_ERROR) { - dev_err(&adapter->pdev->dev, "hardware error - reset\n"); - return; - } - - /* Is send stuck? */ - spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = tx_ring->send_head; - spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - - if (tcb) { - tcb->count++; - - if (tcb->count > NIC_SEND_HANG_THRESHOLD) { - dev_warn(&adapter->pdev->dev, - "Send stuck - reset. tcb->WrIndex %x\n", - tcb->index); - - adapter->netdev->stats.tx_errors++; - - /* perform reset of tx/rx */ - et131x_disable_txrx(netdev); - et131x_enable_txrx(netdev); - } - } -} - -static int et131x_change_mtu(struct net_device *netdev, int new_mtu) -{ - int result = 0; - struct et131x_adapter *adapter = netdev_priv(netdev); - - if (new_mtu < 64 || new_mtu > 9216) - return -EINVAL; - - et131x_disable_txrx(netdev); - - netdev->mtu = new_mtu; - - et131x_adapter_memory_free(adapter); - - /* Set the config parameter for Jumbo Packet support */ - adapter->registry_jumbo_packet = new_mtu + 14; - et131x_soft_reset(adapter); - - result = et131x_adapter_memory_alloc(adapter); - if (result != 0) { - dev_warn(&adapter->pdev->dev, - "Change MTU failed; couldn't re-alloc DMA memory\n"); - return result; - } - - et131x_init_send(adapter); - et131x_hwaddr_init(adapter); - ether_addr_copy(netdev->dev_addr, adapter->addr); - - /* Init the device with the new settings */ - et131x_adapter_setup(adapter); - et131x_enable_txrx(netdev); - - return result; -} - -static const struct net_device_ops et131x_netdev_ops = { - .ndo_open = et131x_open, - .ndo_stop = et131x_close, - .ndo_start_xmit = et131x_tx, - .ndo_set_rx_mode = et131x_multicast, - .ndo_tx_timeout = et131x_tx_timeout, - .ndo_change_mtu = et131x_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - .ndo_get_stats = et131x_stats, - .ndo_do_ioctl = et131x_ioctl, -}; - -static int et131x_pci_setup(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct et131x_adapter *adapter; - int rc; - int ii; - - rc = pci_enable_device(pdev); - if (rc < 0) { - dev_err(&pdev->dev, "pci_enable_device() failed\n"); - goto out; - } - - /* Perform some basic PCI checks */ - if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - dev_err(&pdev->dev, "Can't find PCI device's base address\n"); - rc = -ENODEV; - goto err_disable; - } - - rc = pci_request_regions(pdev, DRIVER_NAME); - if (rc < 0) { - dev_err(&pdev->dev, "Can't get PCI resources\n"); - goto err_disable; - } - - pci_set_master(pdev); - - /* Check the DMA addressing support of this device */ - if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) && - dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) { - dev_err(&pdev->dev, "No usable DMA addressing method\n"); - rc = -EIO; - goto err_release_res; - } - - netdev = alloc_etherdev(sizeof(struct et131x_adapter)); - if (!netdev) { - dev_err(&pdev->dev, "Couldn't alloc netdev struct\n"); - rc = -ENOMEM; - goto err_release_res; - } - - netdev->watchdog_timeo = ET131X_TX_TIMEOUT; - netdev->netdev_ops = &et131x_netdev_ops; - - SET_NETDEV_DEV(netdev, &pdev->dev); - netdev->ethtool_ops = &et131x_ethtool_ops; - - adapter = et131x_adapter_init(netdev, pdev); - - rc = et131x_pci_init(adapter, pdev); - if (rc < 0) - goto err_free_dev; - - /* Map the bus-relative registers to system virtual memory */ - adapter->regs = pci_ioremap_bar(pdev, 0); - if (!adapter->regs) { - dev_err(&pdev->dev, "Cannot map device registers\n"); - rc = -ENOMEM; - goto err_free_dev; - } - - /* If Phy COMA mode was enabled when we went down, disable it here. */ - writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr); - - et131x_soft_reset(adapter); - et131x_disable_interrupts(adapter); - - rc = et131x_adapter_memory_alloc(adapter); - if (rc < 0) { - dev_err(&pdev->dev, "Could not alloc adapter memory (DMA)\n"); - goto err_iounmap; - } - - et131x_init_send(adapter); - - netif_napi_add(netdev, &adapter->napi, et131x_poll, 64); - - ether_addr_copy(netdev->dev_addr, adapter->addr); - - rc = -ENOMEM; - - adapter->mii_bus = mdiobus_alloc(); - if (!adapter->mii_bus) { - dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n"); - goto err_mem_free; - } - - adapter->mii_bus->name = "et131x_eth_mii"; - snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x", - (adapter->pdev->bus->number << 8) | adapter->pdev->devfn); - adapter->mii_bus->priv = netdev; - adapter->mii_bus->read = et131x_mdio_read; - adapter->mii_bus->write = et131x_mdio_write; - adapter->mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), - GFP_KERNEL); - if (!adapter->mii_bus->irq) - goto err_mdio_free; - - for (ii = 0; ii < PHY_MAX_ADDR; ii++) - adapter->mii_bus->irq[ii] = PHY_POLL; - - rc = mdiobus_register(adapter->mii_bus); - if (rc < 0) { - dev_err(&pdev->dev, "failed to register MII bus\n"); - goto err_mdio_free_irq; - } - - rc = et131x_mii_probe(netdev); - if (rc < 0) { - dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto err_mdio_unregister; - } - - et131x_adapter_setup(adapter); - - /* Init variable for counting how long we do not have link status */ - adapter->boot_coma = 0; - et1310_disable_phy_coma(adapter); - - /* We can enable interrupts now - * - * NOTE - Because registration of interrupt handler is done in the - * device's open(), defer enabling device interrupts to that - * point - */ - - rc = register_netdev(netdev); - if (rc < 0) { - dev_err(&pdev->dev, "register_netdev() failed\n"); - goto err_phy_disconnect; - } - - /* Register the net_device struct with the PCI subsystem. Save a copy - * of the PCI config space for this device now that the device has - * been initialized, just in case it needs to be quickly restored. - */ - pci_set_drvdata(pdev, netdev); -out: - return rc; - -err_phy_disconnect: - phy_disconnect(adapter->phydev); -err_mdio_unregister: - mdiobus_unregister(adapter->mii_bus); -err_mdio_free_irq: - kfree(adapter->mii_bus->irq); -err_mdio_free: - mdiobus_free(adapter->mii_bus); -err_mem_free: - et131x_adapter_memory_free(adapter); -err_iounmap: - iounmap(adapter->regs); -err_free_dev: - pci_dev_put(pdev); - free_netdev(netdev); -err_release_res: - pci_release_regions(pdev); -err_disable: - pci_disable_device(pdev); - goto out; -} - -static const struct pci_device_id et131x_pci_table[] = { - { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, - { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, - { 0,} -}; -MODULE_DEVICE_TABLE(pci, et131x_pci_table); - -static struct pci_driver et131x_driver = { - .name = DRIVER_NAME, - .id_table = et131x_pci_table, - .probe = et131x_pci_setup, - .remove = et131x_pci_remove, - .driver.pm = &et131x_pm_ops, -}; - -module_pci_driver(et131x_driver); diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h deleted file mode 100644 index 0727523bb953..000000000000 --- a/drivers/staging/et131x/et131x.h +++ /dev/null @@ -1,1533 +0,0 @@ -/* - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#define DRIVER_NAME "et131x" -#define DRIVER_VERSION "v2.0" - -/* EEPROM registers */ - -/* LBCIF Register Groups (addressed via 32-bit offsets) */ -#define LBCIF_DWORD0_GROUP 0xAC -#define LBCIF_DWORD1_GROUP 0xB0 - -/* LBCIF Registers (addressed via 8-bit offsets) */ -#define LBCIF_ADDRESS_REGISTER 0xAC -#define LBCIF_DATA_REGISTER 0xB0 -#define LBCIF_CONTROL_REGISTER 0xB1 -#define LBCIF_STATUS_REGISTER 0xB2 - -/* LBCIF Control Register Bits */ -#define LBCIF_CONTROL_SEQUENTIAL_READ 0x01 -#define LBCIF_CONTROL_PAGE_WRITE 0x02 -#define LBCIF_CONTROL_EEPROM_RELOAD 0x08 -#define LBCIF_CONTROL_TWO_BYTE_ADDR 0x20 -#define LBCIF_CONTROL_I2C_WRITE 0x40 -#define LBCIF_CONTROL_LBCIF_ENABLE 0x80 - -/* LBCIF Status Register Bits */ -#define LBCIF_STATUS_PHY_QUEUE_AVAIL 0x01 -#define LBCIF_STATUS_I2C_IDLE 0x02 -#define LBCIF_STATUS_ACK_ERROR 0x04 -#define LBCIF_STATUS_GENERAL_ERROR 0x08 -#define LBCIF_STATUS_CHECKSUM_ERROR 0x40 -#define LBCIF_STATUS_EEPROM_PRESENT 0x80 - -/* START OF GLOBAL REGISTER ADDRESS MAP */ -/* - * 10bit registers - * - * Tx queue start address reg in global address map at address 0x0000 - * tx queue end address reg in global address map at address 0x0004 - * rx queue start address reg in global address map at address 0x0008 - * rx queue end address reg in global address map at address 0x000C - */ - -/* - * structure for power management control status reg in global address map - * located at address 0x0010 - * jagcore_rx_rdy bit 9 - * jagcore_tx_rdy bit 8 - * phy_lped_en bit 7 - * phy_sw_coma bit 6 - * rxclk_gate bit 5 - * txclk_gate bit 4 - * sysclk_gate bit 3 - * jagcore_rx_en bit 2 - * jagcore_tx_en bit 1 - * gigephy_en bit 0 - */ -#define ET_PM_PHY_SW_COMA 0x40 -#define ET_PMCSR_INIT 0x38 - -/* - * Interrupt status reg at address 0x0018 - */ -#define ET_INTR_TXDMA_ISR 0x00000008 -#define ET_INTR_TXDMA_ERR 0x00000010 -#define ET_INTR_RXDMA_XFR_DONE 0x00000020 -#define ET_INTR_RXDMA_FB_R0_LOW 0x00000040 -#define ET_INTR_RXDMA_FB_R1_LOW 0x00000080 -#define ET_INTR_RXDMA_STAT_LOW 0x00000100 -#define ET_INTR_RXDMA_ERR 0x00000200 -#define ET_INTR_WATCHDOG 0x00004000 -#define ET_INTR_WOL 0x00008000 -#define ET_INTR_PHY 0x00010000 -#define ET_INTR_TXMAC 0x00020000 -#define ET_INTR_RXMAC 0x00040000 -#define ET_INTR_MAC_STAT 0x00080000 -#define ET_INTR_SLV_TIMEOUT 0x00100000 - -/* - * Interrupt mask register at address 0x001C - * Interrupt alias clear mask reg at address 0x0020 - * Interrupt status alias reg at address 0x0024 - * - * Same masks as above - */ - -/* - * Software reset reg at address 0x0028 - * 0: txdma_sw_reset - * 1: rxdma_sw_reset - * 2: txmac_sw_reset - * 3: rxmac_sw_reset - * 4: mac_sw_reset - * 5: mac_stat_sw_reset - * 6: mmc_sw_reset - *31: selfclr_disable - */ -#define ET_RESET_ALL 0x007F - -/* - * SLV Timer reg at address 0x002C (low 24 bits) - */ - -/* - * MSI Configuration reg at address 0x0030 - */ -#define ET_MSI_VECTOR 0x0000001F -#define ET_MSI_TC 0x00070000 - -/* - * Loopback reg located at address 0x0034 - */ -#define ET_LOOP_MAC 0x00000001 -#define ET_LOOP_DMA 0x00000002 - -/* - * GLOBAL Module of JAGCore Address Mapping - * Located at address 0x0000 - */ -struct global_regs { /* Location: */ - u32 txq_start_addr; /* 0x0000 */ - u32 txq_end_addr; /* 0x0004 */ - u32 rxq_start_addr; /* 0x0008 */ - u32 rxq_end_addr; /* 0x000C */ - u32 pm_csr; /* 0x0010 */ - u32 unused; /* 0x0014 */ - u32 int_status; /* 0x0018 */ - u32 int_mask; /* 0x001C */ - u32 int_alias_clr_en; /* 0x0020 */ - u32 int_status_alias; /* 0x0024 */ - u32 sw_reset; /* 0x0028 */ - u32 slv_timer; /* 0x002C */ - u32 msi_config; /* 0x0030 */ - u32 loopback; /* 0x0034 */ - u32 watchdog_timer; /* 0x0038 */ -}; - -/* START OF TXDMA REGISTER ADDRESS MAP */ -/* - * txdma control status reg at address 0x1000 - */ -#define ET_TXDMA_CSR_HALT 0x00000001 -#define ET_TXDMA_DROP_TLP 0x00000002 -#define ET_TXDMA_CACHE_THRS 0x000000F0 -#define ET_TXDMA_CACHE_SHIFT 4 -#define ET_TXDMA_SNGL_EPKT 0x00000100 -#define ET_TXDMA_CLASS 0x00001E00 - -/* - * structure for txdma packet ring base address hi reg in txdma address map - * located at address 0x1004 - * Defined earlier (u32) - */ - -/* - * structure for txdma packet ring base address low reg in txdma address map - * located at address 0x1008 - * Defined earlier (u32) - */ - -/* - * structure for txdma packet ring number of descriptor reg in txdma address - * map. Located at address 0x100C - * - * 31-10: unused - * 9-0: pr ndes - */ -#define ET_DMA12_MASK 0x0FFF /* 12 bit mask for DMA12W types */ -#define ET_DMA12_WRAP 0x1000 -#define ET_DMA10_MASK 0x03FF /* 10 bit mask for DMA10W types */ -#define ET_DMA10_WRAP 0x0400 -#define ET_DMA4_MASK 0x000F /* 4 bit mask for DMA4W types */ -#define ET_DMA4_WRAP 0x0010 - -#define INDEX12(x) ((x) & ET_DMA12_MASK) -#define INDEX10(x) ((x) & ET_DMA10_MASK) -#define INDEX4(x) ((x) & ET_DMA4_MASK) - -/* - * 10bit DMA with wrap - * txdma tx queue write address reg in txdma address map at 0x1010 - * txdma tx queue write address external reg in txdma address map at 0x1014 - * txdma tx queue read address reg in txdma address map at 0x1018 - * - * u32 - * txdma status writeback address hi reg in txdma address map at0x101C - * txdma status writeback address lo reg in txdma address map at 0x1020 - * - * 10bit DMA with wrap - * txdma service request reg in txdma address map at 0x1024 - * structure for txdma service complete reg in txdma address map at 0x1028 - * - * 4bit DMA with wrap - * txdma tx descriptor cache read index reg in txdma address map at 0x102C - * txdma tx descriptor cache write index reg in txdma address map at 0x1030 - * - * txdma error reg in txdma address map at address 0x1034 - * 0: PyldResend - * 1: PyldRewind - * 4: DescrResend - * 5: DescrRewind - * 8: WrbkResend - * 9: WrbkRewind - */ - -/* - * Tx DMA Module of JAGCore Address Mapping - * Located at address 0x1000 - */ -struct txdma_regs { /* Location: */ - u32 csr; /* 0x1000 */ - u32 pr_base_hi; /* 0x1004 */ - u32 pr_base_lo; /* 0x1008 */ - u32 pr_num_des; /* 0x100C */ - u32 txq_wr_addr; /* 0x1010 */ - u32 txq_wr_addr_ext; /* 0x1014 */ - u32 txq_rd_addr; /* 0x1018 */ - u32 dma_wb_base_hi; /* 0x101C */ - u32 dma_wb_base_lo; /* 0x1020 */ - u32 service_request; /* 0x1024 */ - u32 service_complete; /* 0x1028 */ - u32 cache_rd_index; /* 0x102C */ - u32 cache_wr_index; /* 0x1030 */ - u32 tx_dma_error; /* 0x1034 */ - u32 desc_abort_cnt; /* 0x1038 */ - u32 payload_abort_cnt; /* 0x103c */ - u32 writeback_abort_cnt; /* 0x1040 */ - u32 desc_timeout_cnt; /* 0x1044 */ - u32 payload_timeout_cnt; /* 0x1048 */ - u32 writeback_timeout_cnt; /* 0x104c */ - u32 desc_error_cnt; /* 0x1050 */ - u32 payload_error_cnt; /* 0x1054 */ - u32 writeback_error_cnt; /* 0x1058 */ - u32 dropped_tlp_cnt; /* 0x105c */ - u32 new_service_complete; /* 0x1060 */ - u32 ethernet_packet_cnt; /* 0x1064 */ -}; - -/* END OF TXDMA REGISTER ADDRESS MAP */ - -/* START OF RXDMA REGISTER ADDRESS MAP */ -/* - * structure for control status reg in rxdma address map - * Located at address 0x2000 - * - * CSR - * 0: halt - * 1-3: tc - * 4: fbr_big_endian - * 5: psr_big_endian - * 6: pkt_big_endian - * 7: dma_big_endian - * 8-9: fbr0_size - * 10: fbr0_enable - * 11-12: fbr1_size - * 13: fbr1_enable - * 14: unused - * 15: pkt_drop_disable - * 16: pkt_done_flush - * 17: halt_status - * 18-31: unused - */ -#define ET_RXDMA_CSR_HALT 0x0001 -#define ET_RXDMA_CSR_FBR0_SIZE_LO 0x0100 -#define ET_RXDMA_CSR_FBR0_SIZE_HI 0x0200 -#define ET_RXDMA_CSR_FBR0_ENABLE 0x0400 -#define ET_RXDMA_CSR_FBR1_SIZE_LO 0x0800 -#define ET_RXDMA_CSR_FBR1_SIZE_HI 0x1000 -#define ET_RXDMA_CSR_FBR1_ENABLE 0x2000 -#define ET_RXDMA_CSR_HALT_STATUS 0x00020000 - -/* - * structure for dma writeback lo reg in rxdma address map - * located at address 0x2004 - * Defined earlier (u32) - */ - -/* - * structure for dma writeback hi reg in rxdma address map - * located at address 0x2008 - * Defined earlier (u32) - */ - -/* - * structure for number of packets done reg in rxdma address map - * located at address 0x200C - * - * 31-8: unused - * 7-0: num done - */ - -/* - * structure for max packet time reg in rxdma address map - * located at address 0x2010 - * - * 31-18: unused - * 17-0: time done - */ - -/* - * structure for rx queue read address reg in rxdma address map - * located at address 0x2014 - * Defined earlier (u32) - */ - -/* - * structure for rx queue read address external reg in rxdma address map - * located at address 0x2018 - * Defined earlier (u32) - */ - -/* - * structure for rx queue write address reg in rxdma address map - * located at address 0x201C - * Defined earlier (u32) - */ - -/* - * structure for packet status ring base address lo reg in rxdma address map - * located at address 0x2020 - * Defined earlier (u32) - */ - -/* - * structure for packet status ring base address hi reg in rxdma address map - * located at address 0x2024 - * Defined earlier (u32) - */ - -/* - * structure for packet status ring number of descriptors reg in rxdma address - * map. Located at address 0x2028 - * - * 31-12: unused - * 11-0: psr ndes - */ -#define ET_RXDMA_PSR_NUM_DES_MASK 0xFFF - -/* - * structure for packet status ring available offset reg in rxdma address map - * located at address 0x202C - * - * 31-13: unused - * 12: psr avail wrap - * 11-0: psr avail - */ - -/* - * structure for packet status ring full offset reg in rxdma address map - * located at address 0x2030 - * - * 31-13: unused - * 12: psr full wrap - * 11-0: psr full - */ - -/* - * structure for packet status ring access index reg in rxdma address map - * located at address 0x2034 - * - * 31-5: unused - * 4-0: psr_ai - */ - -/* - * structure for packet status ring minimum descriptors reg in rxdma address - * map. Located at address 0x2038 - * - * 31-12: unused - * 11-0: psr_min - */ - -/* - * structure for free buffer ring base lo address reg in rxdma address map - * located at address 0x203C - * Defined earlier (u32) - */ - -/* - * structure for free buffer ring base hi address reg in rxdma address map - * located at address 0x2040 - * Defined earlier (u32) - */ - -/* - * structure for free buffer ring number of descriptors reg in rxdma address - * map. Located at address 0x2044 - * - * 31-10: unused - * 9-0: fbr ndesc - */ - -/* - * structure for free buffer ring 0 available offset reg in rxdma address map - * located at address 0x2048 - * Defined earlier (u32) - */ - -/* - * structure for free buffer ring 0 full offset reg in rxdma address map - * located at address 0x204C - * Defined earlier (u32) - */ - -/* - * structure for free buffer cache 0 full offset reg in rxdma address map - * located at address 0x2050 - * - * 31-5: unused - * 4-0: fbc rdi - */ - -/* - * structure for free buffer ring 0 minimum descriptor reg in rxdma address map - * located at address 0x2054 - * - * 31-10: unused - * 9-0: fbr min - */ - -/* - * structure for free buffer ring 1 base address lo reg in rxdma address map - * located at address 0x2058 - 0x205C - * Defined earlier (RXDMA_FBR_BASE_LO_t and RXDMA_FBR_BASE_HI_t) - */ - -/* - * structure for free buffer ring 1 number of descriptors reg in rxdma address - * map. Located at address 0x2060 - * Defined earlier (RXDMA_FBR_NUM_DES_t) - */ - -/* - * structure for free buffer ring 1 available offset reg in rxdma address map - * located at address 0x2064 - * Defined Earlier (RXDMA_FBR_AVAIL_OFFSET_t) - */ - -/* - * structure for free buffer ring 1 full offset reg in rxdma address map - * located at address 0x2068 - * Defined Earlier (RXDMA_FBR_FULL_OFFSET_t) - */ - -/* - * structure for free buffer cache 1 read index reg in rxdma address map - * located at address 0x206C - * Defined Earlier (RXDMA_FBC_RD_INDEX_t) - */ - -/* - * structure for free buffer ring 1 minimum descriptor reg in rxdma address map - * located at address 0x2070 - * Defined Earlier (RXDMA_FBR_MIN_DES_t) - */ - -/* - * Rx DMA Module of JAGCore Address Mapping - * Located at address 0x2000 - */ -struct rxdma_regs { /* Location: */ - u32 csr; /* 0x2000 */ - u32 dma_wb_base_lo; /* 0x2004 */ - u32 dma_wb_base_hi; /* 0x2008 */ - u32 num_pkt_done; /* 0x200C */ - u32 max_pkt_time; /* 0x2010 */ - u32 rxq_rd_addr; /* 0x2014 */ - u32 rxq_rd_addr_ext; /* 0x2018 */ - u32 rxq_wr_addr; /* 0x201C */ - u32 psr_base_lo; /* 0x2020 */ - u32 psr_base_hi; /* 0x2024 */ - u32 psr_num_des; /* 0x2028 */ - u32 psr_avail_offset; /* 0x202C */ - u32 psr_full_offset; /* 0x2030 */ - u32 psr_access_index; /* 0x2034 */ - u32 psr_min_des; /* 0x2038 */ - u32 fbr0_base_lo; /* 0x203C */ - u32 fbr0_base_hi; /* 0x2040 */ - u32 fbr0_num_des; /* 0x2044 */ - u32 fbr0_avail_offset; /* 0x2048 */ - u32 fbr0_full_offset; /* 0x204C */ - u32 fbr0_rd_index; /* 0x2050 */ - u32 fbr0_min_des; /* 0x2054 */ - u32 fbr1_base_lo; /* 0x2058 */ - u32 fbr1_base_hi; /* 0x205C */ - u32 fbr1_num_des; /* 0x2060 */ - u32 fbr1_avail_offset; /* 0x2064 */ - u32 fbr1_full_offset; /* 0x2068 */ - u32 fbr1_rd_index; /* 0x206C */ - u32 fbr1_min_des; /* 0x2070 */ -}; - -/* END OF RXDMA REGISTER ADDRESS MAP */ - -/* START OF TXMAC REGISTER ADDRESS MAP */ -/* - * structure for control reg in txmac address map - * located at address 0x3000 - * - * bits - * 31-8: unused - * 7: cklseg_disable - * 6: ckbcnt_disable - * 5: cksegnum - * 4: async_disable - * 3: fc_disable - * 2: mcif_disable - * 1: mif_disable - * 0: txmac_en - */ -#define ET_TX_CTRL_FC_DISABLE 0x0008 -#define ET_TX_CTRL_TXMAC_ENABLE 0x0001 - -/* - * structure for shadow pointer reg in txmac address map - * located at address 0x3004 - * 31-27: reserved - * 26-16: txq rd ptr - * 15-11: reserved - * 10-0: txq wr ptr - */ - -/* - * structure for error count reg in txmac address map - * located at address 0x3008 - * - * 31-12: unused - * 11-8: reserved - * 7-4: txq_underrun - * 3-0: fifo_underrun - */ - -/* - * structure for max fill reg in txmac address map - * located at address 0x300C - * 31-12: unused - * 11-0: max fill - */ - -/* - * structure for cf parameter reg in txmac address map - * located at address 0x3010 - * 31-16: cfep - * 15-0: cfpt - */ - -/* - * structure for tx test reg in txmac address map - * located at address 0x3014 - * 31-17: unused - * 16: reserved - * 15: txtest_en - * 14-11: unused - * 10-0: txq test pointer - */ - -/* - * structure for error reg in txmac address map - * located at address 0x3018 - * - * 31-9: unused - * 8: fifo_underrun - * 7-6: unused - * 5: ctrl2_err - * 4: txq_underrun - * 3: bcnt_err - * 2: lseg_err - * 1: segnum_err - * 0: seg0_err - */ - -/* - * structure for error interrupt reg in txmac address map - * located at address 0x301C - * - * 31-9: unused - * 8: fifo_underrun - * 7-6: unused - * 5: ctrl2_err - * 4: txq_underrun - * 3: bcnt_err - * 2: lseg_err - * 1: segnum_err - * 0: seg0_err - */ - -/* - * structure for error interrupt reg in txmac address map - * located at address 0x3020 - * - * 31-2: unused - * 1: bp_req - * 0: bp_xonxoff - */ - -/* - * Tx MAC Module of JAGCore Address Mapping - */ -struct txmac_regs { /* Location: */ - u32 ctl; /* 0x3000 */ - u32 shadow_ptr; /* 0x3004 */ - u32 err_cnt; /* 0x3008 */ - u32 max_fill; /* 0x300C */ - u32 cf_param; /* 0x3010 */ - u32 tx_test; /* 0x3014 */ - u32 err; /* 0x3018 */ - u32 err_int; /* 0x301C */ - u32 bp_ctrl; /* 0x3020 */ -}; - -/* END OF TXMAC REGISTER ADDRESS MAP */ - -/* START OF RXMAC REGISTER ADDRESS MAP */ - -/* - * structure for rxmac control reg in rxmac address map - * located at address 0x4000 - * - * 31-7: reserved - * 6: rxmac_int_disable - * 5: async_disable - * 4: mif_disable - * 3: wol_disable - * 2: pkt_filter_disable - * 1: mcif_disable - * 0: rxmac_en - */ -#define ET_RX_CTRL_WOL_DISABLE 0x0008 -#define ET_RX_CTRL_RXMAC_ENABLE 0x0001 - -/* - * structure for Wake On Lan Control and CRC 0 reg in rxmac address map - * located at address 0x4004 - * 31-16: crc - * 15-12: reserved - * 11: ignore_pp - * 10: ignore_mp - * 9: clr_intr - * 8: ignore_link_chg - * 7: ignore_uni - * 6: ignore_multi - * 5: ignore_broad - * 4-0: valid_crc 4-0 - */ - -/* - * structure for CRC 1 and CRC 2 reg in rxmac address map - * located at address 0x4008 - * - * 31-16: crc2 - * 15-0: crc1 - */ - -/* - * structure for CRC 3 and CRC 4 reg in rxmac address map - * located at address 0x400C - * - * 31-16: crc4 - * 15-0: crc3 - */ - -/* - * structure for Wake On Lan Source Address Lo reg in rxmac address map - * located at address 0x4010 - * - * 31-24: sa3 - * 23-16: sa4 - * 15-8: sa5 - * 7-0: sa6 - */ -#define ET_RX_WOL_LO_SA3_SHIFT 24 -#define ET_RX_WOL_LO_SA4_SHIFT 16 -#define ET_RX_WOL_LO_SA5_SHIFT 8 - -/* - * structure for Wake On Lan Source Address Hi reg in rxmac address map - * located at address 0x4014 - * - * 31-16: reserved - * 15-8: sa1 - * 7-0: sa2 - */ -#define ET_RX_WOL_HI_SA1_SHIFT 8 - -/* - * structure for Wake On Lan mask reg in rxmac address map - * located at address 0x4018 - 0x4064 - * Defined earlier (u32) - */ - -/* - * structure for Unicast Packet Filter Address 1 reg in rxmac address map - * located at address 0x4068 - * - * 31-24: addr1_3 - * 23-16: addr1_4 - * 15-8: addr1_5 - * 7-0: addr1_6 - */ -#define ET_RX_UNI_PF_ADDR1_3_SHIFT 24 -#define ET_RX_UNI_PF_ADDR1_4_SHIFT 16 -#define ET_RX_UNI_PF_ADDR1_5_SHIFT 8 - -/* - * structure for Unicast Packet Filter Address 2 reg in rxmac address map - * located at address 0x406C - * - * 31-24: addr2_3 - * 23-16: addr2_4 - * 15-8: addr2_5 - * 7-0: addr2_6 - */ -#define ET_RX_UNI_PF_ADDR2_3_SHIFT 24 -#define ET_RX_UNI_PF_ADDR2_4_SHIFT 16 -#define ET_RX_UNI_PF_ADDR2_5_SHIFT 8 - -/* - * structure for Unicast Packet Filter Address 1 & 2 reg in rxmac address map - * located at address 0x4070 - * - * 31-24: addr2_1 - * 23-16: addr2_2 - * 15-8: addr1_1 - * 7-0: addr1_2 - */ -#define ET_RX_UNI_PF_ADDR2_1_SHIFT 24 -#define ET_RX_UNI_PF_ADDR2_2_SHIFT 16 -#define ET_RX_UNI_PF_ADDR1_1_SHIFT 8 - -/* - * structure for Multicast Hash reg in rxmac address map - * located at address 0x4074 - 0x4080 - * Defined earlier (u32) - */ - -/* - * structure for Packet Filter Control reg in rxmac address map - * located at address 0x4084 - * - * 31-23: unused - * 22-16: min_pkt_size - * 15-4: unused - * 3: filter_frag_en - * 2: filter_uni_en - * 1: filter_multi_en - * 0: filter_broad_en - */ -#define ET_RX_PFCTRL_MIN_PKT_SZ_SHIFT 16 -#define ET_RX_PFCTRL_FRAG_FILTER_ENABLE 0x0008 -#define ET_RX_PFCTRL_UNICST_FILTER_ENABLE 0x0004 -#define ET_RX_PFCTRL_MLTCST_FILTER_ENABLE 0x0002 -#define ET_RX_PFCTRL_BRDCST_FILTER_ENABLE 0x0001 - -/* - * structure for Memory Controller Interface Control Max Segment reg in rxmac - * address map. Located at address 0x4088 - * - * 31-10: reserved - * 9-2: max_size - * 1: fc_en - * 0: seg_en - */ -#define ET_RX_MCIF_CTRL_MAX_SEG_SIZE_SHIFT 2 -#define ET_RX_MCIF_CTRL_MAX_SEG_FC_ENABLE 0x0002 -#define ET_RX_MCIF_CTRL_MAX_SEG_ENABLE 0x0001 - -/* - * structure for Memory Controller Interface Water Mark reg in rxmac address - * map. Located at address 0x408C - * - * 31-26: unused - * 25-16: mark_hi - * 15-10: unused - * 9-0: mark_lo - */ - -/* - * structure for Rx Queue Dialog reg in rxmac address map. - * located at address 0x4090 - * - * 31-26: reserved - * 25-16: rd_ptr - * 15-10: reserved - * 9-0: wr_ptr - */ - -/* - * structure for space available reg in rxmac address map. - * located at address 0x4094 - * - * 31-17: reserved - * 16: space_avail_en - * 15-10: reserved - * 9-0: space_avail - */ - -/* - * structure for management interface reg in rxmac address map. - * located at address 0x4098 - * - * 31-18: reserved - * 17: drop_pkt_en - * 16-0: drop_pkt_mask - */ - -/* - * structure for Error reg in rxmac address map. - * located at address 0x409C - * - * 31-4: unused - * 3: mif - * 2: async - * 1: pkt_filter - * 0: mcif - */ - -/* - * Rx MAC Module of JAGCore Address Mapping - */ -struct rxmac_regs { /* Location: */ - u32 ctrl; /* 0x4000 */ - u32 crc0; /* 0x4004 */ - u32 crc12; /* 0x4008 */ - u32 crc34; /* 0x400C */ - u32 sa_lo; /* 0x4010 */ - u32 sa_hi; /* 0x4014 */ - u32 mask0_word0; /* 0x4018 */ - u32 mask0_word1; /* 0x401C */ - u32 mask0_word2; /* 0x4020 */ - u32 mask0_word3; /* 0x4024 */ - u32 mask1_word0; /* 0x4028 */ - u32 mask1_word1; /* 0x402C */ - u32 mask1_word2; /* 0x4030 */ - u32 mask1_word3; /* 0x4034 */ - u32 mask2_word0; /* 0x4038 */ - u32 mask2_word1; /* 0x403C */ - u32 mask2_word2; /* 0x4040 */ - u32 mask2_word3; /* 0x4044 */ - u32 mask3_word0; /* 0x4048 */ - u32 mask3_word1; /* 0x404C */ - u32 mask3_word2; /* 0x4050 */ - u32 mask3_word3; /* 0x4054 */ - u32 mask4_word0; /* 0x4058 */ - u32 mask4_word1; /* 0x405C */ - u32 mask4_word2; /* 0x4060 */ - u32 mask4_word3; /* 0x4064 */ - u32 uni_pf_addr1; /* 0x4068 */ - u32 uni_pf_addr2; /* 0x406C */ - u32 uni_pf_addr3; /* 0x4070 */ - u32 multi_hash1; /* 0x4074 */ - u32 multi_hash2; /* 0x4078 */ - u32 multi_hash3; /* 0x407C */ - u32 multi_hash4; /* 0x4080 */ - u32 pf_ctrl; /* 0x4084 */ - u32 mcif_ctrl_max_seg; /* 0x4088 */ - u32 mcif_water_mark; /* 0x408C */ - u32 rxq_diag; /* 0x4090 */ - u32 space_avail; /* 0x4094 */ - - u32 mif_ctrl; /* 0x4098 */ - u32 err_reg; /* 0x409C */ -}; - -/* END OF RXMAC REGISTER ADDRESS MAP */ - -/* START OF MAC REGISTER ADDRESS MAP */ -/* - * structure for configuration #1 reg in mac address map. - * located at address 0x5000 - * - * 31: soft reset - * 30: sim reset - * 29-20: reserved - * 19: reset rx mc - * 18: reset tx mc - * 17: reset rx func - * 16: reset tx fnc - * 15-9: reserved - * 8: loopback - * 7-6: reserved - * 5: rx flow - * 4: tx flow - * 3: syncd rx en - * 2: rx enable - * 1: syncd tx en - * 0: tx enable - */ -#define ET_MAC_CFG1_SOFT_RESET 0x80000000 -#define ET_MAC_CFG1_SIM_RESET 0x40000000 -#define ET_MAC_CFG1_RESET_RXMC 0x00080000 -#define ET_MAC_CFG1_RESET_TXMC 0x00040000 -#define ET_MAC_CFG1_RESET_RXFUNC 0x00020000 -#define ET_MAC_CFG1_RESET_TXFUNC 0x00010000 -#define ET_MAC_CFG1_LOOPBACK 0x00000100 -#define ET_MAC_CFG1_RX_FLOW 0x00000020 -#define ET_MAC_CFG1_TX_FLOW 0x00000010 -#define ET_MAC_CFG1_RX_ENABLE 0x00000004 -#define ET_MAC_CFG1_TX_ENABLE 0x00000001 -#define ET_MAC_CFG1_WAIT 0x0000000A /* RX & TX syncd */ - -/* - * structure for configuration #2 reg in mac address map. - * located at address 0x5004 - * 31-16: reserved - * 15-12: preamble - * 11-10: reserved - * 9-8: if mode - * 7-6: reserved - * 5: huge frame - * 4: length check - * 3: undefined - * 2: pad crc - * 1: crc enable - * 0: full duplex - */ -#define ET_MAC_CFG2_PREAMBLE_SHIFT 12 -#define ET_MAC_CFG2_IFMODE_MASK 0x0300 -#define ET_MAC_CFG2_IFMODE_1000 0x0200 -#define ET_MAC_CFG2_IFMODE_100 0x0100 -#define ET_MAC_CFG2_IFMODE_HUGE_FRAME 0x0020 -#define ET_MAC_CFG2_IFMODE_LEN_CHECK 0x0010 -#define ET_MAC_CFG2_IFMODE_PAD_CRC 0x0004 -#define ET_MAC_CFG2_IFMODE_CRC_ENABLE 0x0002 -#define ET_MAC_CFG2_IFMODE_FULL_DPLX 0x0001 - -/* - * structure for Interpacket gap reg in mac address map. - * located at address 0x5008 - * - * 31: reserved - * 30-24: non B2B ipg 1 - * 23: undefined - * 22-16: non B2B ipg 2 - * 15-8: Min ifg enforce - * 7-0: B2B ipg - * - * structure for half duplex reg in mac address map. - * located at address 0x500C - * 31-24: reserved - * 23-20: Alt BEB trunc - * 19: Alt BEB enable - * 18: BP no backoff - * 17: no backoff - * 16: excess defer - * 15-12: re-xmit max - * 11-10: reserved - * 9-0: collision window - */ - -/* - * structure for Maximum Frame Length reg in mac address map. - * located at address 0x5010: bits 0-15 hold the length. - */ - -/* - * structure for Reserve 1 reg in mac address map. - * located at address 0x5014 - 0x5018 - * Defined earlier (u32) - */ - -/* - * structure for Test reg in mac address map. - * located at address 0x501C - * test: bits 0-2, rest unused - */ - -/* - * structure for MII Management Configuration reg in mac address map. - * located at address 0x5020 - * - * 31: reset MII mgmt - * 30-6: unused - * 5: scan auto increment - * 4: preamble suppress - * 3: undefined - * 2-0: mgmt clock reset - */ -#define ET_MAC_MIIMGMT_CLK_RST 0x0007 - -/* - * structure for MII Management Command reg in mac address map. - * located at address 0x5024 - * bit 1: scan cycle - * bit 0: read cycle - */ - -/* - * structure for MII Management Address reg in mac address map. - * located at address 0x5028 - * 31-13: reserved - * 12-8: phy addr - * 7-5: reserved - * 4-0: register - */ -#define ET_MAC_MII_ADDR(phy, reg) ((phy) << 8 | (reg)) - -/* - * structure for MII Management Control reg in mac address map. - * located at address 0x502C - * 31-16: reserved - * 15-0: phy control - */ - -/* - * structure for MII Management Status reg in mac address map. - * located at address 0x5030 - * 31-16: reserved - * 15-0: phy control - */ -#define ET_MAC_MIIMGMT_STAT_PHYCRTL_MASK 0xFFFF - -/* - * structure for MII Management Indicators reg in mac address map. - * located at address 0x5034 - * 31-3: reserved - * 2: not valid - * 1: scanning - * 0: busy - */ -#define ET_MAC_MGMT_BUSY 0x00000001 /* busy */ -#define ET_MAC_MGMT_WAIT 0x00000005 /* busy | not valid */ - -/* - * structure for Interface Control reg in mac address map. - * located at address 0x5038 - * - * 31: reset if module - * 30-28: reserved - * 27: tbi mode - * 26: ghd mode - * 25: lhd mode - * 24: phy mode - * 23: reset per mii - * 22-17: reserved - * 16: speed - * 15: reset pe100x - * 14-11: reserved - * 10: force quiet - * 9: no cipher - * 8: disable link fail - * 7: reset gpsi - * 6-1: reserved - * 0: enable jabber protection - */ -#define ET_MAC_IFCTRL_GHDMODE (1 << 26) -#define ET_MAC_IFCTRL_PHYMODE (1 << 24) - -/* - * structure for Interface Status reg in mac address map. - * located at address 0x503C - * - * 31-10: reserved - * 9: excess_defer - * 8: clash - * 7: phy_jabber - * 6: phy_link_ok - * 5: phy_full_duplex - * 4: phy_speed - * 3: pe100x_link_fail - * 2: pe10t_loss_carrier - * 1: pe10t_sqe_error - * 0: pe10t_jabber - */ - -/* - * structure for Mac Station Address, Part 1 reg in mac address map. - * located at address 0x5040 - * - * 31-24: Octet6 - * 23-16: Octet5 - * 15-8: Octet4 - * 7-0: Octet3 - */ -#define ET_MAC_STATION_ADDR1_OC6_SHIFT 24 -#define ET_MAC_STATION_ADDR1_OC5_SHIFT 16 -#define ET_MAC_STATION_ADDR1_OC4_SHIFT 8 - -/* - * structure for Mac Station Address, Part 2 reg in mac address map. - * located at address 0x5044 - * - * 31-24: Octet2 - * 23-16: Octet1 - * 15-0: reserved - */ -#define ET_MAC_STATION_ADDR2_OC2_SHIFT 24 -#define ET_MAC_STATION_ADDR2_OC1_SHIFT 16 - -/* - * MAC Module of JAGCore Address Mapping - */ -struct mac_regs { /* Location: */ - u32 cfg1; /* 0x5000 */ - u32 cfg2; /* 0x5004 */ - u32 ipg; /* 0x5008 */ - u32 hfdp; /* 0x500C */ - u32 max_fm_len; /* 0x5010 */ - u32 rsv1; /* 0x5014 */ - u32 rsv2; /* 0x5018 */ - u32 mac_test; /* 0x501C */ - u32 mii_mgmt_cfg; /* 0x5020 */ - u32 mii_mgmt_cmd; /* 0x5024 */ - u32 mii_mgmt_addr; /* 0x5028 */ - u32 mii_mgmt_ctrl; /* 0x502C */ - u32 mii_mgmt_stat; /* 0x5030 */ - u32 mii_mgmt_indicator; /* 0x5034 */ - u32 if_ctrl; /* 0x5038 */ - u32 if_stat; /* 0x503C */ - u32 station_addr_1; /* 0x5040 */ - u32 station_addr_2; /* 0x5044 */ -}; - -/* END OF MAC REGISTER ADDRESS MAP */ - -/* START OF MAC STAT REGISTER ADDRESS MAP */ -/* - * structure for Carry Register One and it's Mask Register reg located in mac - * stat address map address 0x6130 and 0x6138. - * - * 31: tr64 - * 30: tr127 - * 29: tr255 - * 28: tr511 - * 27: tr1k - * 26: trmax - * 25: trmgv - * 24-17: unused - * 16: rbyt - * 15: rpkt - * 14: rfcs - * 13: rmca - * 12: rbca - * 11: rxcf - * 10: rxpf - * 9: rxuo - * 8: raln - * 7: rflr - * 6: rcde - * 5: rcse - * 4: rund - * 3: rovr - * 2: rfrg - * 1: rjbr - * 0: rdrp - */ - -/* - * structure for Carry Register Two Mask Register reg in mac stat address map. - * located at address 0x613C - * - * 31-20: unused - * 19: tjbr - * 18: tfcs - * 17: txcf - * 16: tovr - * 15: tund - * 14: trfg - * 13: tbyt - * 12: tpkt - * 11: tmca - * 10: tbca - * 9: txpf - * 8: tdfr - * 7: tedf - * 6: tscl - * 5: tmcl - * 4: tlcl - * 3: txcl - * 2: tncl - * 1: tpfh - * 0: tdrp - */ - -/* - * MAC STATS Module of JAGCore Address Mapping - */ -struct macstat_regs { /* Location: */ - u32 pad[32]; /* 0x6000 - 607C */ - - /* counters */ - u32 txrx_0_64_byte_frames; /* 0x6080 */ - u32 txrx_65_127_byte_frames; /* 0x6084 */ - u32 txrx_128_255_byte_frames; /* 0x6088 */ - u32 txrx_256_511_byte_frames; /* 0x608C */ - u32 txrx_512_1023_byte_frames; /* 0x6090 */ - u32 txrx_1024_1518_byte_frames; /* 0x6094 */ - u32 txrx_1519_1522_gvln_frames; /* 0x6098 */ - u32 rx_bytes; /* 0x609C */ - u32 rx_packets; /* 0x60A0 */ - u32 rx_fcs_errs; /* 0x60A4 */ - u32 rx_multicast_packets; /* 0x60A8 */ - u32 rx_broadcast_packets; /* 0x60AC */ - u32 rx_control_frames; /* 0x60B0 */ - u32 rx_pause_frames; /* 0x60B4 */ - u32 rx_unknown_opcodes; /* 0x60B8 */ - u32 rx_align_errs; /* 0x60BC */ - u32 rx_frame_len_errs; /* 0x60C0 */ - u32 rx_code_errs; /* 0x60C4 */ - u32 rx_carrier_sense_errs; /* 0x60C8 */ - u32 rx_undersize_packets; /* 0x60CC */ - u32 rx_oversize_packets; /* 0x60D0 */ - u32 rx_fragment_packets; /* 0x60D4 */ - u32 rx_jabbers; /* 0x60D8 */ - u32 rx_drops; /* 0x60DC */ - u32 tx_bytes; /* 0x60E0 */ - u32 tx_packets; /* 0x60E4 */ - u32 tx_multicast_packets; /* 0x60E8 */ - u32 tx_broadcast_packets; /* 0x60EC */ - u32 tx_pause_frames; /* 0x60F0 */ - u32 tx_deferred; /* 0x60F4 */ - u32 tx_excessive_deferred; /* 0x60F8 */ - u32 tx_single_collisions; /* 0x60FC */ - u32 tx_multiple_collisions; /* 0x6100 */ - u32 tx_late_collisions; /* 0x6104 */ - u32 tx_excessive_collisions; /* 0x6108 */ - u32 tx_total_collisions; /* 0x610C */ - u32 tx_pause_honored_frames; /* 0x6110 */ - u32 tx_drops; /* 0x6114 */ - u32 tx_jabbers; /* 0x6118 */ - u32 tx_fcs_errs; /* 0x611C */ - u32 tx_control_frames; /* 0x6120 */ - u32 tx_oversize_frames; /* 0x6124 */ - u32 tx_undersize_frames; /* 0x6128 */ - u32 tx_fragments; /* 0x612C */ - u32 carry_reg1; /* 0x6130 */ - u32 carry_reg2; /* 0x6134 */ - u32 carry_reg1_mask; /* 0x6138 */ - u32 carry_reg2_mask; /* 0x613C */ -}; - -/* END OF MAC STAT REGISTER ADDRESS MAP */ - -/* START OF MMC REGISTER ADDRESS MAP */ -/* - * Main Memory Controller Control reg in mmc address map. - * located at address 0x7000 - */ -#define ET_MMC_ENABLE 1 -#define ET_MMC_ARB_DISABLE 2 -#define ET_MMC_RXMAC_DISABLE 4 -#define ET_MMC_TXMAC_DISABLE 8 -#define ET_MMC_TXDMA_DISABLE 16 -#define ET_MMC_RXDMA_DISABLE 32 -#define ET_MMC_FORCE_CE 64 - -/* - * Main Memory Controller Host Memory Access Address reg in mmc - * address map. Located at address 0x7004. Top 16 bits hold the address bits - */ -#define ET_SRAM_REQ_ACCESS 1 -#define ET_SRAM_WR_ACCESS 2 -#define ET_SRAM_IS_CTRL 4 - -/* - * structure for Main Memory Controller Host Memory Access Data reg in mmc - * address map. Located at address 0x7008 - 0x7014 - * Defined earlier (u32) - */ - -/* - * Memory Control Module of JAGCore Address Mapping - */ -struct mmc_regs { /* Location: */ - u32 mmc_ctrl; /* 0x7000 */ - u32 sram_access; /* 0x7004 */ - u32 sram_word1; /* 0x7008 */ - u32 sram_word2; /* 0x700C */ - u32 sram_word3; /* 0x7010 */ - u32 sram_word4; /* 0x7014 */ -}; - -/* END OF MMC REGISTER ADDRESS MAP */ - -/* - * JAGCore Address Mapping - */ -struct address_map { - struct global_regs global; - /* unused section of global address map */ - u8 unused_global[4096 - sizeof(struct global_regs)]; - struct txdma_regs txdma; - /* unused section of txdma address map */ - u8 unused_txdma[4096 - sizeof(struct txdma_regs)]; - struct rxdma_regs rxdma; - /* unused section of rxdma address map */ - u8 unused_rxdma[4096 - sizeof(struct rxdma_regs)]; - struct txmac_regs txmac; - /* unused section of txmac address map */ - u8 unused_txmac[4096 - sizeof(struct txmac_regs)]; - struct rxmac_regs rxmac; - /* unused section of rxmac address map */ - u8 unused_rxmac[4096 - sizeof(struct rxmac_regs)]; - struct mac_regs mac; - /* unused section of mac address map */ - u8 unused_mac[4096 - sizeof(struct mac_regs)]; - struct macstat_regs macstat; - /* unused section of mac stat address map */ - u8 unused_mac_stat[4096 - sizeof(struct macstat_regs)]; - struct mmc_regs mmc; - /* unused section of mmc address map */ - u8 unused_mmc[4096 - sizeof(struct mmc_regs)]; - /* unused section of address map */ - u8 unused_[1015808]; - u8 unused_exp_rom[4096]; /* MGS-size TBD */ - u8 unused__[524288]; /* unused section of address map */ -}; - -/* - * Defines for generic MII registers 0x00 -> 0x0F can be found in - * include/linux/mii.h - */ -/* some defines for modem registers that seem to be 'reserved' */ -#define PHY_INDEX_REG 0x10 -#define PHY_DATA_REG 0x11 -#define PHY_MPHY_CONTROL_REG 0x12 - -/* defines for specified registers */ -#define PHY_LOOPBACK_CONTROL 0x13 /* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */ - /* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */ -#define PHY_REGISTER_MGMT_CONTROL 0x15 /* TRU_VMI_MI_SEQ_CONTROL_REG 21 */ -#define PHY_CONFIG 0x16 /* TRU_VMI_CONFIGURATION_REG 22 */ -#define PHY_PHY_CONTROL 0x17 /* TRU_VMI_PHY_CONTROL_REG 23 */ -#define PHY_INTERRUPT_MASK 0x18 /* TRU_VMI_INTERRUPT_MASK_REG 24 */ -#define PHY_INTERRUPT_STATUS 0x19 /* TRU_VMI_INTERRUPT_STATUS_REG 25 */ -#define PHY_PHY_STATUS 0x1A /* TRU_VMI_PHY_STATUS_REG 26 */ -#define PHY_LED_1 0x1B /* TRU_VMI_LED_CONTROL_1_REG 27 */ -#define PHY_LED_2 0x1C /* TRU_VMI_LED_CONTROL_2_REG 28 */ - /* TRU_VMI_LINK_CONTROL_REG 29 */ - /* TRU_VMI_TIMING_CONTROL_REG */ - -/* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */ -#define ET_1000BT_MSTR_SLV 0x4000 - -/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */ - -/* MI Register 19: Loopback Control Reg(0x13) - * 15: mii_en - * 14: pcs_en - * 13: pmd_en - * 12: all_digital_en - * 11: replica_en - * 10: line_driver_en - * 9-0: reserved - */ - -/* MI Register 20: Reserved Reg(0x14) */ - -/* MI Register 21: Management Interface Control Reg(0x15) - * 15-11: reserved - * 10-4: mi_error_count - * 3: reserved - * 2: ignore_10g_fr - * 1: reserved - * 0: preamble_suppress_en - */ - -/* MI Register 22: PHY Configuration Reg(0x16) - * 15: crs_tx_en - * 14: reserved - * 13-12: tx_fifo_depth - * 11-10: speed_downshift - * 9: pbi_detect - * 8: tbi_rate - * 7: alternate_np - * 6: group_mdio_en - * 5: tx_clock_en - * 4: sys_clock_en - * 3: reserved - * 2-0: mac_if_mode - */ -#define ET_PHY_CONFIG_TX_FIFO_DEPTH 0x3000 - -#define ET_PHY_CONFIG_FIFO_DEPTH_8 0x0000 -#define ET_PHY_CONFIG_FIFO_DEPTH_16 0x1000 -#define ET_PHY_CONFIG_FIFO_DEPTH_32 0x2000 -#define ET_PHY_CONFIG_FIFO_DEPTH_64 0x3000 - -/* MI Register 23: PHY CONTROL Reg(0x17) - * 15: reserved - * 14: tdr_en - * 13: reserved - * 12-11: downshift_attempts - * 10-6: reserved - * 5: jabber_10baseT - * 4: sqe_10baseT - * 3: tp_loopback_10baseT - * 2: preamble_gen_en - * 1: reserved - * 0: force_int - */ - -/* MI Register 24: Interrupt Mask Reg(0x18) - * 15-10: reserved - * 9: mdio_sync_lost - * 8: autoneg_status - * 7: hi_bit_err - * 6: np_rx - * 5: err_counter_full - * 4: fifo_over_underflow - * 3: rx_status - * 2: link_status - * 1: automatic_speed - * 0: int_en - */ - -/* MI Register 25: Interrupt Status Reg(0x19) - * 15-10: reserved - * 9: mdio_sync_lost - * 8: autoneg_status - * 7: hi_bit_err - * 6: np_rx - * 5: err_counter_full - * 4: fifo_over_underflow - * 3: rx_status - * 2: link_status - * 1: automatic_speed - * 0: int_en - */ - -/* MI Register 26: PHY Status Reg(0x1A) - * 15: reserved - * 14-13: autoneg_fault - * 12: autoneg_status - * 11: mdi_x_status - * 10: polarity_status - * 9-8: speed_status - * 7: duplex_status - * 6: link_status - * 5: tx_status - * 4: rx_status - * 3: collision_status - * 2: autoneg_en - * 1: pause_en - * 0: asymmetric_dir - */ -#define ET_PHY_AUTONEG_STATUS 0x1000 -#define ET_PHY_POLARITY_STATUS 0x0400 -#define ET_PHY_SPEED_STATUS 0x0300 -#define ET_PHY_DUPLEX_STATUS 0x0080 -#define ET_PHY_LSTATUS 0x0040 -#define ET_PHY_AUTONEG_ENABLE 0x0020 - -/* MI Register 27: LED Control Reg 1(0x1B) - * 15-14: reserved - * 13-12: led_dup_indicate - * 11-10: led_10baseT - * 9-8: led_collision - * 7-4: reserved - * 3-2: pulse_dur - * 1: pulse_stretch1 - * 0: pulse_stretch0 - */ - -/* MI Register 28: LED Control Reg 2(0x1C) - * 15-12: led_link - * 11-8: led_tx_rx - * 7-4: led_100BaseTX - * 3-0: led_1000BaseT - */ -#define ET_LED2_LED_LINK 0xF000 -#define ET_LED2_LED_TXRX 0x0F00 -#define ET_LED2_LED_100TX 0x00F0 -#define ET_LED2_LED_1000T 0x000F - -/* defines for LED control reg 2 values */ -#define LED_VAL_1000BT 0x0 -#define LED_VAL_100BTX 0x1 -#define LED_VAL_10BT 0x2 -#define LED_VAL_1000BT_100BTX 0x3 /* 1000BT on, 100BTX blink */ -#define LED_VAL_LINKON 0x4 -#define LED_VAL_TX 0x5 -#define LED_VAL_RX 0x6 -#define LED_VAL_TXRX 0x7 /* TX or RX */ -#define LED_VAL_DUPLEXFULL 0x8 -#define LED_VAL_COLLISION 0x9 -#define LED_VAL_LINKON_ACTIVE 0xA /* Link on, activity blink */ -#define LED_VAL_LINKON_RECV 0xB /* Link on, receive blink */ -#define LED_VAL_DUPLEXFULL_COLLISION 0xC /* Duplex on, collision blink */ -#define LED_VAL_BLINK 0xD -#define LED_VAL_ON 0xE -#define LED_VAL_OFF 0xF - -#define LED_LINK_SHIFT 12 -#define LED_TXRX_SHIFT 8 -#define LED_100TX_SHIFT 4 - -/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */