From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 15 Aug 2008 07:40:44 +0000 (-0700)
Subject: spi: bugfix spi_add_device() with duplicate chipselects
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e48880e02e7e7ead9daa47fe3a20486f550668d3;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git

spi: bugfix spi_add_device() with duplicate chipselects

When reviewing a recent patch I noticed a potential trouble spot in the
registration of new SPI devices.  The SPI master driver is told to set
the device up before adding it to the driver model, so that it's always
properly set up when probe() is called.  (This is important, because in
the case of inverted chipselects, this device can make the bus misbehave
until it's properly deselected.  It's got to be set up even if no driver
binds to the device.)

The trouble spot is that it doesn't first verify that no other device
has been added using that chipselect.  If such a device has been added,
its configuration gets trashed.  (Fortunately this has not been a common
error!)

The fix here adds an explicit check, and a mutex to protect the relevant
critical region.

[akpm@linux-foundation.org: make the lock local to spi_add_device()]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 964124b60db2..75e86865234c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -226,10 +226,11 @@ EXPORT_SYMBOL_GPL(spi_alloc_device);
  * Companion function to spi_alloc_device.  Devices allocated with
  * spi_alloc_device can be added onto the spi bus with this function.
  *
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
  */
 int spi_add_device(struct spi_device *spi)
 {
+	static DEFINE_MUTEX(spi_add_lock);
 	struct device *dev = spi->master->dev.parent;
 	int status;
 
@@ -246,26 +247,43 @@ int spi_add_device(struct spi_device *spi)
 			"%s.%u", spi->master->dev.bus_id,
 			spi->chip_select);
 
-	/* drivers may modify this initial i/o setup */
+
+	/* We need to make sure there's no other device with this
+	 * chipselect **BEFORE** we call setup(), else we'll trash
+	 * its configuration.  Lock against concurrent add() calls.
+	 */
+	mutex_lock(&spi_add_lock);
+
+	if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+			!= NULL) {
+		dev_err(dev, "chipselect %d already in use\n",
+				spi->chip_select);
+		status = -EBUSY;
+		goto done;
+	}
+
+	/* Drivers may modify this initial i/o setup, but will
+	 * normally rely on the device being setup.  Devices
+	 * using SPI_CS_HIGH can't coexist well otherwise...
+	 */
 	status = spi->master->setup(spi);
 	if (status < 0) {
 		dev_err(dev, "can't %s %s, status %d\n",
 				"setup", spi->dev.bus_id, status);
-		return status;
+		goto done;
 	}
 
-	/* driver core catches callers that misbehave by defining
-	 * devices that already exist.
-	 */
+	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0) {
+	if (status < 0)
 		dev_err(dev, "can't %s %s, status %d\n",
 				"add", spi->dev.bus_id, status);
-		return status;
-	}
+	else
+		dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
 
-	dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
-	return 0;
+done:
+	mutex_unlock(&spi_add_lock);
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_add_device);