From: Chris Zankel Date: Fri, 24 Jun 2005 05:01:30 +0000 (-0700) Subject: [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 7 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e344b63eeec7850b5e900e10c8a6c61d083fd3a4;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 7 The attached patches provides part 7 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/include/asm-xtensa/xtensa/cacheasm.h b/include/asm-xtensa/xtensa/cacheasm.h new file mode 100644 index 000000000000..0cdbb0bf180e --- /dev/null +++ b/include/asm-xtensa/xtensa/cacheasm.h @@ -0,0 +1,708 @@ +#ifndef XTENSA_CACHEASM_H +#define XTENSA_CACHEASM_H + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/cacheasm.h -- assembler-specific cache + * related definitions that depend on CORE configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include + + +/* + * This header file defines assembler macros of the form: + * cache_ + * where is 'i' or 'd' for instruction and data caches, + * and indicates the function of the macro. + * + * The following functions are defined, + * and apply only to the specified cache (I or D): + * + * reset + * Resets the cache. + * + * sync + * Makes sure any previous cache instructions have been completed; + * ie. makes sure any previous cache control operations + * have had full effect and been synchronized to memory. + * Eg. any invalidate completed [so as not to generate a hit], + * any writebacks or other pipelined writes written to memory, etc. + * + * invalidate_line (single cache line) + * invalidate_region (specified memory range) + * invalidate_all (entire cache) + * Invalidates all cache entries that cache + * data from the specified memory range. + * NOTE: locked entries are not invalidated. + * + * writeback_line (single cache line) + * writeback_region (specified memory range) + * writeback_all (entire cache) + * Writes back to memory all dirty cache entries + * that cache data from the specified memory range, + * and marks these entries as clean. + * NOTE: on some future implementations, this might + * also invalidate. + * NOTE: locked entries are written back, but never invalidated. + * NOTE: instruction caches never implement writeback. + * + * writeback_inv_line (single cache line) + * writeback_inv_region (specified memory range) + * writeback_inv_all (entire cache) + * Writes back to memory all dirty cache entries + * that cache data from the specified memory range, + * and invalidates these entries (including all clean + * cache entries that cache data from that range). + * NOTE: locked entries are written back but not invalidated. + * NOTE: instruction caches never implement writeback. + * + * lock_line (single cache line) + * lock_region (specified memory range) + * Prefetch and lock the specified memory range into cache. + * NOTE: if any part of the specified memory range cannot + * be locked, a ??? exception occurs. These macros don't + * do anything special (yet anyway) to handle this situation. + * + * unlock_line (single cache line) + * unlock_region (specified memory range) + * unlock_all (entire cache) + * Unlock cache entries that cache the specified memory range. + * Entries not already locked are unaffected. + */ + + + +/*************************** GENERIC -- ALL CACHES ***************************/ + + +/* + * The following macros assume the following cache size/parameter limits + * in the current Xtensa core implementation: + * cache size: 1024 bytes minimum + * line size: 16 - 64 bytes + * way count: 1 - 4 + * + * Minimum entries per way (ie. per associativity) = 1024 / 64 / 4 = 4 + * Hence the assumption that each loop can execute four cache instructions. + * + * Correspondingly, the offset range of instructions is assumed able to cover + * four lines, ie. offsets {0,1,2,3} * line_size are assumed valid for + * both hit and indexed cache instructions. Ie. these offsets are all + * valid: 0, 16, 32, 48, 64, 96, 128, 192 (for line sizes 16, 32, 64). + * This is true of all original cache instructions + * (dhi, ihi, dhwb, dhwbi, dii, iii) which have offsets + * of 0 to 1020 in multiples of 4 (ie. 8 bits shifted by 2). + * This is also true of subsequent cache instructions + * (dhu, ihu, diu, iiu, diwb, diwbi, dpfl, ipfl) which have offsets + * of 0 to 240 in multiples of 16 (ie. 4 bits shifted by 4). + * + * (Maximum cache size, currently 32k, doesn't affect the following macros. + * Cache ways > MMU min page size cause aliasing but that's another matter.) + */ + + + +/* + * Macro to apply an 'indexed' cache instruction to the entire cache. + * + * Parameters: + * cainst instruction/ that takes an address register parameter + * and an offset parameter (in range 0 .. 3*linesize). + * size size of cache in bytes + * linesize size of cache line in bytes + * assoc_or1 number of associativities (ways/sets) in cache + * if all sets affected by cainst, + * or 1 if only one set (or not all sets) of the cache + * is affected by cainst (eg. DIWB or DIWBI [not yet ISA defined]). + * aa, ab unique address registers (temporaries) + */ + + .macro cache_index_all cainst, size, linesize, assoc_or1, aa, ab + + // Sanity-check on cache parameters: + .ifne (\size % (\linesize * \assoc_or1 * 4)) + .err // cache configuration outside expected/supported range! + .endif + + // \size byte cache, \linesize byte lines, \assoc_or1 way(s) affected by each \cainst. + movi \aa, (\size / (\linesize * \assoc_or1 * 4)) + // Possible improvement: need only loop if \aa > 1 ; + // however that particular condition is highly unlikely. + movi \ab, 0 // to iterate over cache + floop \aa, cachex\@ + \cainst \ab, 0*\linesize + \cainst \ab, 1*\linesize + \cainst \ab, 2*\linesize + \cainst \ab, 3*\linesize + addi \ab, \ab, 4*\linesize // move to next line + floopend \aa, cachex\@ + + .endm + + +/* + * Macro to apply a 'hit' cache instruction to a memory region, + * ie. to any cache entries that cache a specified portion (region) of memory. + * Takes care of the unaligned cases, ie. may apply to one + * more cache line than $asize / lineSize if $aaddr is not aligned. + * + * + * Parameters are: + * cainst instruction/macro that takes an address register parameter + * and an offset parameter (currently always zero) + * and generates a cache instruction (eg. "dhi", "dhwb", "ihi", etc.) + * linesize_log2 log2(size of cache line in bytes) + * addr register containing start address of region (clobbered) + * asize register containing size of the region in bytes (clobbered) + * askew unique register used as temporary + * + * !?!?! 2DO: optimization: iterate max(cache_size and \asize) / linesize + */ + + .macro cache_hit_region cainst, linesize_log2, addr, asize, askew + + // Make \asize the number of iterations: + extui \askew, \addr, 0, \linesize_log2 // get unalignment amount of \addr + add \asize, \asize, \askew // ... and add it to \asize + addi \asize, \asize, (1 << \linesize_log2) - 1 // round up! + srli \asize, \asize, \linesize_log2 + + // Iterate over region: + floopnez \asize, cacheh\@ + \cainst \addr, 0 + addi \addr, \addr, (1 << \linesize_log2) // move to next line + floopend \asize, cacheh\@ + + .endm + + + + + +/*************************** INSTRUCTION CACHE ***************************/ + + +/* + * Reset/initialize the instruction cache by simply invalidating it: + * (need to unlock first also, if cache locking implemented): + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro icache_reset aa, ab + icache_unlock_all \aa, \ab + icache_invalidate_all \aa, \ab + .endm + + +/* + * Synchronize after an instruction cache operation, + * to be sure everything is in sync with memory as to be + * expected following any previous instruction cache control operations. + * + * Parameters are: + * ar an address register (temporary) (currently unused, but may be used in future) + */ + .macro icache_sync ar +#if XCHAL_ICACHE_SIZE > 0 + isync +#endif + .endm + + + +/* + * Invalidate a single line of the instruction cache. + * Parameters are: + * ar address register that contains (virtual) address to invalidate + * (may get clobbered in a future implementation, but not currently) + * offset (optional) offset to add to \ar to compute effective address to invalidate + * (note: some number of lsbits are ignored) + */ + .macro icache_invalidate_line ar, offset +#if XCHAL_ICACHE_SIZE > 0 + ihi \ar, \offset // invalidate icache line + /* + * NOTE: in some version of the silicon [!!!SHOULD HAVE BEEN DOCUMENTED!!!] + * 'ihi' doesn't work, so it had been replaced with 'iii' + * (which would just invalidate more than it should, + * which should be okay other than the performance hit + * because cache locking did not exist in that version, + * unless user somehow relies on something being cached). + * [WHAT VERSION IS IT!!?!? + * IS THERE ANY WAY TO TEST FOR THAT HERE, TO OUTPUT 'III' ONLY IF NEEDED!?!?]. + * + * iii \ar, \offset + */ + icache_sync \ar +#endif + .endm + + + + +/* + * Invalidate instruction cache entries that cache a specified portion of memory. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro icache_invalidate_region astart, asize, ac +#if XCHAL_ICACHE_SIZE > 0 + // Instruction cache region invalidation: + cache_hit_region ihi, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac + icache_sync \ac + // End of instruction cache region invalidation +#endif + .endm + + + +/* + * Invalidate entire instruction cache. + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro icache_invalidate_all aa, ab +#if XCHAL_ICACHE_SIZE > 0 + // Instruction cache invalidation: + cache_index_all iii, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, XCHAL_ICACHE_WAYS, \aa, \ab + icache_sync \aa + // End of instruction cache invalidation +#endif + .endm + + + +/* + * Lock (prefetch & lock) a single line of the instruction cache. + * + * Parameters are: + * ar address register that contains (virtual) address to lock + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to lock + * (note: some number of lsbits are ignored) + */ + .macro icache_lock_line ar, offset +#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE + ipfl \ar, \offset /* prefetch and lock icache line */ + icache_sync \ar +#endif + .endm + + + +/* + * Lock (prefetch & lock) a specified portion of memory into the instruction cache. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro icache_lock_region astart, asize, ac +#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE + // Instruction cache region lock: + cache_hit_region ipfl, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac + icache_sync \ac + // End of instruction cache region lock +#endif + .endm + + + +/* + * Unlock a single line of the instruction cache. + * + * Parameters are: + * ar address register that contains (virtual) address to unlock + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to unlock + * (note: some number of lsbits are ignored) + */ + .macro icache_unlock_line ar, offset +#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE + ihu \ar, \offset /* unlock icache line */ + icache_sync \ar +#endif + .endm + + + +/* + * Unlock a specified portion of memory from the instruction cache. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro icache_unlock_region astart, asize, ac +#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE + // Instruction cache region unlock: + cache_hit_region ihu, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac + icache_sync \ac + // End of instruction cache region unlock +#endif + .endm + + + +/* + * Unlock entire instruction cache. + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro icache_unlock_all aa, ab +#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE + // Instruction cache unlock: + cache_index_all iiu, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, 1, \aa, \ab + icache_sync \aa + // End of instruction cache unlock +#endif + .endm + + + + + +/*************************** DATA CACHE ***************************/ + + + +/* + * Reset/initialize the data cache by simply invalidating it + * (need to unlock first also, if cache locking implemented): + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro dcache_reset aa, ab + dcache_unlock_all \aa, \ab + dcache_invalidate_all \aa, \ab + .endm + + + + +/* + * Synchronize after a data cache operation, + * to be sure everything is in sync with memory as to be + * expected following any previous data cache control operations. + * + * Parameters are: + * ar an address register (temporary) (currently unused, but may be used in future) + */ + .macro dcache_sync ar +#if XCHAL_DCACHE_SIZE > 0 + // This previous sequence errs on the conservative side (too much so); a DSYNC should be sufficient: + //memw // synchronize data cache changes relative to subsequent memory accesses + //isync // be conservative and ISYNC as well (just to be sure) + + dsync +#endif + .endm + + + +/* + * Synchronize after a data store operation, + * to be sure the stored data is completely off the processor + * (and assuming there is no buffering outside the processor, + * that the data is in memory). This may be required to + * ensure that the processor's write buffers are emptied. + * A MEMW followed by a read guarantees this, by definition. + * We also try to make sure the read itself completes. + * + * Parameters are: + * ar an address register (temporary) + */ + .macro write_sync ar + memw // ensure previous memory accesses are complete prior to subsequent memory accesses + l32i \ar, sp, 0 // completing this read ensures any previous write has completed, because of MEMW + //slot + add \ar, \ar, \ar // use the result of the read to help ensure the read completes (in future architectures) + .endm + + +/* + * Invalidate a single line of the data cache. + * Parameters are: + * ar address register that contains (virtual) address to invalidate + * (may get clobbered in a future implementation, but not currently) + * offset (optional) offset to add to \ar to compute effective address to invalidate + * (note: some number of lsbits are ignored) + */ + .macro dcache_invalidate_line ar, offset +#if XCHAL_DCACHE_SIZE > 0 + dhi \ar, \offset + dcache_sync \ar +#endif + .endm + + + + + +/* + * Invalidate data cache entries that cache a specified portion of memory. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro dcache_invalidate_region astart, asize, ac +#if XCHAL_DCACHE_SIZE > 0 + // Data cache region invalidation: + cache_hit_region dhi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac + dcache_sync \ac + // End of data cache region invalidation +#endif + .endm + + + +#if 0 +/* + * This is a work-around for a bug in SiChip1 (???). + * There should be a proper mechanism for not outputting + * these instructions when not needed. + * To enable work-around, uncomment this and replace 'dii' + * with 'dii_s1' everywhere, eg. in dcache_invalidate_all + * macro below. + */ + .macro dii_s1 ar, offset + dii \ar, \offset + or \ar, \ar, \ar + or \ar, \ar, \ar + or \ar, \ar, \ar + or \ar, \ar, \ar + .endm +#endif + + +/* + * Invalidate entire data cache. + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro dcache_invalidate_all aa, ab +#if XCHAL_DCACHE_SIZE > 0 + // Data cache invalidation: + cache_index_all dii, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, XCHAL_DCACHE_WAYS, \aa, \ab + dcache_sync \aa + // End of data cache invalidation +#endif + .endm + + + +/* + * Writeback a single line of the data cache. + * Parameters are: + * ar address register that contains (virtual) address to writeback + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to writeback + * (note: some number of lsbits are ignored) + */ + .macro dcache_writeback_line ar, offset +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK + dhwb \ar, \offset + dcache_sync \ar +#endif + .endm + + + +/* + * Writeback dirty data cache entries that cache a specified portion of memory. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro dcache_writeback_region astart, asize, ac +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK + // Data cache region writeback: + cache_hit_region dhwb, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac + dcache_sync \ac + // End of data cache region writeback +#endif + .endm + + + +/* + * Writeback entire data cache. + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro dcache_writeback_all aa, ab +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK + // Data cache writeback: + cache_index_all diwb, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab + dcache_sync \aa + // End of data cache writeback +#endif + .endm + + + +/* + * Writeback and invalidate a single line of the data cache. + * Parameters are: + * ar address register that contains (virtual) address to writeback and invalidate + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to writeback and invalidate + * (note: some number of lsbits are ignored) + */ + .macro dcache_writeback_inv_line ar, offset +#if XCHAL_DCACHE_SIZE > 0 + dhwbi \ar, \offset /* writeback and invalidate dcache line */ + dcache_sync \ar +#endif + .endm + + + +/* + * Writeback and invalidate data cache entries that cache a specified portion of memory. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro dcache_writeback_inv_region astart, asize, ac +#if XCHAL_DCACHE_SIZE > 0 + // Data cache region writeback and invalidate: + cache_hit_region dhwbi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac + dcache_sync \ac + // End of data cache region writeback and invalidate +#endif + .endm + + + +/* + * Writeback and invalidate entire data cache. + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro dcache_writeback_inv_all aa, ab +#if XCHAL_DCACHE_SIZE > 0 + // Data cache writeback and invalidate: +#if XCHAL_DCACHE_IS_WRITEBACK + cache_index_all diwbi, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab + dcache_sync \aa +#else /*writeback*/ + // Data cache does not support writeback, so just invalidate: */ + dcache_invalidate_all \aa, \ab +#endif /*writeback*/ + // End of data cache writeback and invalidate +#endif + .endm + + + + +/* + * Lock (prefetch & lock) a single line of the data cache. + * + * Parameters are: + * ar address register that contains (virtual) address to lock + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to lock + * (note: some number of lsbits are ignored) + */ + .macro dcache_lock_line ar, offset +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE + dpfl \ar, \offset /* prefetch and lock dcache line */ + dcache_sync \ar +#endif + .endm + + + +/* + * Lock (prefetch & lock) a specified portion of memory into the data cache. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro dcache_lock_region astart, asize, ac +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE + // Data cache region lock: + cache_hit_region dpfl, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac + dcache_sync \ac + // End of data cache region lock +#endif + .endm + + + +/* + * Unlock a single line of the data cache. + * + * Parameters are: + * ar address register that contains (virtual) address to unlock + * (may get clobbered in a future implementation, but not currently) + * offset offset to add to \ar to compute effective address to unlock + * (note: some number of lsbits are ignored) + */ + .macro dcache_unlock_line ar, offset +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE + dhu \ar, \offset /* unlock dcache line */ + dcache_sync \ar +#endif + .endm + + + +/* + * Unlock a specified portion of memory from the data cache. + * Parameters are: + * astart start address (register gets clobbered) + * asize size of the region in bytes (register gets clobbered) + * ac unique register used as temporary + */ + .macro dcache_unlock_region astart, asize, ac +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE + // Data cache region unlock: + cache_hit_region dhu, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac + dcache_sync \ac + // End of data cache region unlock +#endif + .endm + + + +/* + * Unlock entire data cache. + * + * Parameters: + * aa, ab unique address registers (temporaries) + */ + .macro dcache_unlock_all aa, ab +#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE + // Data cache unlock: + cache_index_all diu, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab + dcache_sync \aa + // End of data cache unlock +#endif + .endm + + +#endif /*XTENSA_CACHEASM_H*/ + diff --git a/include/asm-xtensa/xtensa/cacheattrasm.h b/include/asm-xtensa/xtensa/cacheattrasm.h new file mode 100644 index 000000000000..1c3e117b3592 --- /dev/null +++ b/include/asm-xtensa/xtensa/cacheattrasm.h @@ -0,0 +1,432 @@ +#ifndef XTENSA_CACHEATTRASM_H +#define XTENSA_CACHEATTRASM_H + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/cacheattrasm.h -- assembler-specific + * CACHEATTR register related definitions that depend on CORE + * configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include + + +/* + * This header file defines assembler macros of the form: + * cacheattr_ + * where: + * is 'i', 'd' or absent for instruction, data + * or both caches; and + * indicates the function of the macro. + * + * The following functions are defined: + * + * icacheattr_get + * Reads I-cache CACHEATTR into a2 (clobbers a3-a5). + * + * dcacheattr_get + * Reads D-cache CACHEATTR into a2 (clobbers a3-a5). + * (Note: for configs with a real CACHEATTR register, the + * above two macros are identical.) + * + * cacheattr_set + * Writes both I-cache and D-cache CACHEATTRs from a2 (a3-a8 clobbered). + * Works even when changing one's own code's attributes. + * + * icacheattr_is_enabled label + * Branches to \label if I-cache appears to have been enabled + * (eg. if CACHEATTR contains a cache-enabled attribute). + * (clobbers a2-a5,SAR) + * + * dcacheattr_is_enabled label + * Branches to \label if D-cache appears to have been enabled + * (eg. if CACHEATTR contains a cache-enabled attribute). + * (clobbers a2-a5,SAR) + * + * cacheattr_is_enabled label + * Branches to \label if either I-cache or D-cache appears to have been enabled + * (eg. if CACHEATTR contains a cache-enabled attribute). + * (clobbers a2-a5,SAR) + * + * The following macros are only defined under certain conditions: + * + * icacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) + * Writes I-cache CACHEATTR from a2 (a3-a8 clobbered). + * + * dcacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) + * Writes D-cache CACHEATTR from a2 (a3-a8 clobbered). + */ + + + +/*************************** GENERIC -- ALL CACHES ***************************/ + +/* + * _cacheattr_get + * + * (Internal macro.) + * Returns value of CACHEATTR register (or closest equivalent) in a2. + * + * Entry: + * (none) + * Exit: + * a2 value read from CACHEATTR + * a3-a5 clobbered (temporaries) + */ + .macro _cacheattr_get tlb +#if XCHAL_HAVE_CACHEATTR + rsr a2, CACHEATTR +#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + // We have a config that "mimics" CACHEATTR using a simplified + // "MMU" composed of a single statically-mapped way. + // DTLB and ITLB are independent, so there's no single + // cache attribute that can describe both. So for now + // just return the DTLB state. + movi a5, 0xE0000000 + movi a2, 0 + movi a3, 0 +1: add a3, a3, a5 // next segment + r&tlb&1 a4, a3 // get PPN+CA of segment at 0xE0000000, 0xC0000000, ..., 0 + dsync // interlock??? + slli a2, a2, 4 + extui a4, a4, 0, 4 // extract CA + or a2, a2, a4 + bnez a3, 1b +#else + // This macro isn't applicable to arbitrary MMU configurations. + // Just return zero. + movi a2, 0 +#endif + .endm + + .macro icacheattr_get + _cacheattr_get itlb + .endm + + .macro dcacheattr_get + _cacheattr_get dtlb + .endm + + +#define XCHAL_CACHEATTR_ALL_BYPASS 0x22222222 /* default (powerup/reset) value of CACHEATTR, all BYPASS + mode (ie. disabled/bypassed caches) */ + +#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + +#define XCHAL_FCA_ENAMASK 0x001A /* bitmap of fetch attributes that require enabled icache */ +#define XCHAL_LCA_ENAMASK 0x0003 /* bitmap of load attributes that require enabled dcache */ +#define XCHAL_SCA_ENAMASK 0x0003 /* bitmap of store attributes that require enabled dcache */ +#define XCHAL_LSCA_ENAMASK (XCHAL_LCA_ENAMASK|XCHAL_SCA_ENAMASK) /* l/s attrs requiring enabled dcache */ +#define XCHAL_ALLCA_ENAMASK (XCHAL_FCA_ENAMASK|XCHAL_LSCA_ENAMASK) /* all attrs requiring enabled caches */ + +/* + * _cacheattr_is_enabled + * + * (Internal macro.) + * Branches to \label if CACHEATTR in a2 indicates an enabled + * cache, using mask in a3. + * + * Parameters: + * label where to branch to if cache is enabled + * Entry: + * a2 contains CACHEATTR value used to determine whether + * caches are enabled + * a3 16-bit constant where each bit correspond to + * one of the 16 possible CA values (in a CACHEATTR mask); + * CA values that indicate the cache is enabled + * have their corresponding bit set in this mask + * (eg. use XCHAL_xCA_ENAMASK , above) + * Exit: + * a2,a4,a5 clobbered + * SAR clobbered + */ + .macro _cacheattr_is_enabled label + movi a4, 8 // loop 8 times +.Lcaife\@: + extui a5, a2, 0, 4 // get CA nibble + ssr a5 // index into mask according to CA... + srl a5, a3 // ...and get CA's mask bit in a5 bit 0 + bbsi.l a5, 0, \label // if CA indicates cache enabled, jump to label + srli a2, a2, 4 // next nibble + addi a4, a4, -1 + bnez a4, .Lcaife\@ // loop for each nibble + .endm + +#else /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ + .macro _cacheattr_is_enabled label + j \label // macro not applicable, assume caches always enabled + .endm +#endif /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ + + + +/* + * icacheattr_is_enabled + * + * Branches to \label if I-cache is enabled. + * + * Parameters: + * label where to branch to if icache is enabled + * Entry: + * (none) + * Exit: + * a2-a5, SAR clobbered (temporaries) + */ + .macro icacheattr_is_enabled label +#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + icacheattr_get + movi a3, XCHAL_FCA_ENAMASK +#endif + _cacheattr_is_enabled \label + .endm + +/* + * dcacheattr_is_enabled + * + * Branches to \label if D-cache is enabled. + * + * Parameters: + * label where to branch to if dcache is enabled + * Entry: + * (none) + * Exit: + * a2-a5, SAR clobbered (temporaries) + */ + .macro dcacheattr_is_enabled label +#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + dcacheattr_get + movi a3, XCHAL_LSCA_ENAMASK +#endif + _cacheattr_is_enabled \label + .endm + +/* + * cacheattr_is_enabled + * + * Branches to \label if either I-cache or D-cache is enabled. + * + * Parameters: + * label where to branch to if a cache is enabled + * Entry: + * (none) + * Exit: + * a2-a5, SAR clobbered (temporaries) + */ + .macro cacheattr_is_enabled label +#if XCHAL_HAVE_CACHEATTR + rsr a2, CACHEATTR + movi a3, XCHAL_ALLCA_ENAMASK +#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + icacheattr_get + movi a3, XCHAL_FCA_ENAMASK + _cacheattr_is_enabled \label + dcacheattr_get + movi a3, XCHAL_LSCA_ENAMASK +#endif + _cacheattr_is_enabled \label + .endm + + + +/* + * The ISA does not have a defined way to change the + * instruction cache attributes of the running code, + * ie. of the memory area that encloses the current PC. + * However, each micro-architecture (or class of + * configurations within a micro-architecture) + * provides a way to deal with this issue. + * + * Here are a few macros used to implement the relevant + * approach taken. + */ + +#if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + // We have a config that "mimics" CACHEATTR using a simplified + // "MMU" composed of a single statically-mapped way. + +/* + * icacheattr_set + * + * Entry: + * a2 cacheattr value to set + * Exit: + * a2 unchanged + * a3-a8 clobbered (temporaries) + */ + .macro icacheattr_set + + movi a5, 0xE0000000 // mask of upper 3 bits + movi a6, 3f // PC where ITLB is set + movi a3, 0 // start at region 0 (0 .. 7) + and a6, a6, a5 // upper 3 bits of local PC area + mov a7, a2 // copy a2 so it doesn't get clobbered + j 3f + +# if XCHAL_HAVE_XLT_CACHEATTR + // Can do translations, use generic method: +1: sub a6, a3, a5 // address of some other segment + ritlb1 a8, a6 // save its PPN+CA + dsync // interlock?? + witlb a4, a6 // make it translate to this code area + movi a6, 5f // where to jump into it + isync + sub a6, a6, a5 // adjust jump address within that other segment + jx a6 + + // Note that in the following code snippet, which runs at a different virtual + // address than it is assembled for, we avoid using literals (eg. via movi/l32r) + // just in case literals end up in a different 512 MB segment, and we avoid + // instructions that rely on the current PC being what is expected. + // + .align 4 + _j 6f // this is at label '5' minus 4 bytes + .align 4 +5: witlb a4, a3 // we're in other segment, now can write previous segment's CA + isync + add a6, a6, a5 // back to previous segment + addi a6, a6, -4 // next jump label + jx a6 + +6: sub a6, a3, a5 // address of some other segment + witlb a8, a6 // restore PPN+CA of other segment + mov a6, a3 // restore a6 + isync +# else /* XCHAL_HAVE_XLT_CACHEATTR */ + // Use micro-architecture specific method. + // The following 4-instruction sequence is aligned such that + // it all fits within a single I-cache line. Sixteen byte + // alignment is sufficient for this (using XCHAL_ICACHE_LINESIZE + // actually causes problems because that can be greater than + // the alignment of the reset vector, where this macro is often + // invoked, which would cause the linker to align the reset + // vector code away from the reset vector!!). + .align 16 /*XCHAL_ICACHE_LINESIZE*/ +1: _witlb a4, a3 // write wired PTE (CA, no PPN) of 512MB segment to ITLB + _isync + nop + nop +# endif /* XCHAL_HAVE_XLT_CACHEATTR */ + beq a3, a5, 4f // done? + + // Note that in the WITLB loop, we don't do any load/stores + // (may not be an issue here, but it is important in the DTLB case). +2: srli a7, a7, 4 // next CA + sub a3, a3, a5 // next segment (add 0x20000000) +3: +# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ + ritlb1 a8, a3 // get current PPN+CA of segment + dsync // interlock??? + extui a4, a7, 0, 4 // extract CA to set + srli a8, a8, 4 // clear CA but keep PPN ... + slli a8, a8, 4 // ... + add a4, a4, a8 // combine new CA with PPN to preserve +# else + extui a4, a7, 0, 4 // extract CA +# endif + beq a3, a6, 1b // current PC's region? if so, do it in a safe way + witlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to ITLB + bne a3, a5, 2b + isync // make sure all ifetch changes take effect +4: + .endm // icacheattr_set + + +/* + * dcacheattr_set + * + * Entry: + * a2 cacheattr value to set + * Exit: + * a2 unchanged + * a3-a8 clobbered (temporaries) + */ + + .macro dcacheattr_set + + movi a5, 0xE0000000 // mask of upper 3 bits + movi a3, 0 // start at region 0 (0 .. 7) + mov a7, a2 // copy a2 so it doesn't get clobbered + j 3f + // Note that in the WDTLB loop, we don't do any load/stores + // (including implicit l32r via movi) because it isn't safe. +2: srli a7, a7, 4 // next CA + sub a3, a3, a5 // next segment (add 0x20000000) +3: +# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ + rdtlb1 a8, a3 // get current PPN+CA of segment + dsync // interlock??? + extui a4, a7, 0, 4 // extract CA to set + srli a8, a8, 4 // clear CA but keep PPN ... + slli a8, a8, 4 // ... + add a4, a4, a8 // combine new CA with PPN to preserve +# else + extui a4, a7, 0, 4 // extract CA to set +# endif + wdtlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to DTLB + bne a3, a5, 2b + dsync // make sure all data path changes take effect + .endm // dcacheattr_set + +#endif /* XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ + + + +/* + * cacheattr_set + * + * Macro that sets the current CACHEATTR safely + * (both i and d) according to the current contents of a2. + * It works even when changing the cache attributes of + * the currently running code. + * + * Entry: + * a2 cacheattr value to set + * Exit: + * a2 unchanged + * a3-a8 clobbered (temporaries) + */ + .macro cacheattr_set + +#if XCHAL_HAVE_CACHEATTR +# if XCHAL_ICACHE_LINESIZE < 4 + // No i-cache, so can always safely write to CACHEATTR: + wsr a2, CACHEATTR +# else + // The Athens micro-architecture, when using the old + // exception architecture option (ie. with the CACHEATTR register) + // allows changing the cache attributes of the running code + // using the following exact sequence aligned to be within + // an instruction cache line. (NOTE: using XCHAL_ICACHE_LINESIZE + // alignment actually causes problems because that can be greater + // than the alignment of the reset vector, where this macro is often + // invoked, which would cause the linker to align the reset + // vector code away from the reset vector!!). + j 1f + .align 16 /*XCHAL_ICACHE_LINESIZE*/ // align to within an I-cache line +1: _wsr a2, CACHEATTR + _isync + nop + nop +# endif +#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR + // DTLB and ITLB are independent, but to keep semantics + // of this macro we simply write to both. + icacheattr_set + dcacheattr_set +#else + // This macro isn't applicable to arbitrary MMU configurations. + // Do nothing in this case. +#endif + .endm + + +#endif /*XTENSA_CACHEATTRASM_H*/ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/core.h b/include/asm-xtensa/xtensa/config-linux_be/core.h new file mode 100644 index 000000000000..d54fe5eb1064 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/core.h @@ -0,0 +1,1270 @@ +/* + * xtensa/config/core.h -- HAL definitions that are dependent on CORE configuration + * + * This header file is sometimes referred to as the "compile-time HAL" or CHAL. + * It was generated for a specific Xtensa processor configuration. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL source itself to include this file. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_CORE_H +#define XTENSA_CONFIG_CORE_H + +#include + + +/*---------------------------------------------------------------------- + GENERAL + ----------------------------------------------------------------------*/ + +/* + * Separators for macros that expand into arrays. + * These can be predefined by files that #include this one, + * when different separators are required. + */ +/* Element separator for macros that expand into 1-dimensional arrays: */ +#ifndef XCHAL_SEP +#define XCHAL_SEP , +#endif +/* Array separator for macros that expand into 2-dimensional arrays: */ +#ifndef XCHAL_SEP2 +#define XCHAL_SEP2 },{ +#endif + + +/*---------------------------------------------------------------------- + ENDIANNESS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 1 +#define XCHAL_HAVE_LE 0 +#define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN + + +/*---------------------------------------------------------------------- + REGISTER WINDOWS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_WINDOWED 1 /* 1 if windowed registers option configured, 0 otherwise */ +#define XCHAL_NUM_AREGS 64 /* number of physical address regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ + + +/*---------------------------------------------------------------------- + ADDRESS ALIGNMENT + ----------------------------------------------------------------------*/ + +/* These apply to a selected set of core load and store instructions only (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* 1 if unaligned loads cause an exception, 0 otherwise */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* 1 if unaligned stores cause an exception, 0 otherwise */ + + +/*---------------------------------------------------------------------- + INTERRUPTS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* 1 if interrupt option configured, 0 otherwise */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* 1 if high-priority interrupt option configured, 0 otherwise */ +#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS +#define XCHAL_HAVE_NMI 0 /* 1 if NMI option configured, 0 otherwise */ +#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* number of bits to hold an interrupt number: roundup(log2(number of interrupts)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* number of external interrupts */ +#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels (not including level zero!) */ +#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */ +#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */ +#define XCHAL_EXCM_LEVEL 1 /* level of interrupts masked by PS.EXCM (XEA2 only; always 1 in T10xx); + for XEA1, where there is no PS.EXCM, this is always 1; + interrupts at levels FIRST_HIGHPRI <= n <= EXCM_LEVEL, if any, + are termed "medium priority" interrupts (post T10xx only) */ +/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL0_MASK 0x00000000 +#define XCHAL_INTLEVEL1_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_MASK 0x00008902 +#define XCHAL_INTLEVEL3_MASK 0x00011204 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00000000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 +#define XCHAL_INTLEVEL8_MASK 0x00000000 +#define XCHAL_INTLEVEL9_MASK 0x00000000 +#define XCHAL_INTLEVEL10_MASK 0x00000000 +#define XCHAL_INTLEVEL11_MASK 0x00000000 +#define XCHAL_INTLEVEL12_MASK 0x00000000 +#define XCHAL_INTLEVEL13_MASK 0x00000000 +#define XCHAL_INTLEVEL14_MASK 0x00000000 +#define XCHAL_INTLEVEL15_MASK 0x00000000 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTLEVEL_MASKS 0x00000000 XCHAL_SEP \ + 0x000064F9 XCHAL_SEP \ + 0x00008902 XCHAL_SEP \ + 0x00011204 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000 +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL8_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL9_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL10_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL11_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL12_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL13_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL14_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL15_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all low-priority interrupts */ +#define XCHAL_EXCM_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all interrupts masked by PS.EXCM (or CEXCM) */ +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTLEVEL_ANDBELOW_MASKS 0x00000000 XCHAL_SEP \ + 0x000064F9 XCHAL_SEP \ + 0x0000EDFB XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF + +/* Interrupt numbers for each interrupt level at which only one interrupt was configured: */ +/*#define XCHAL_INTLEVEL1_NUM ...more than one interrupt at this level...*/ +/*#define XCHAL_INTLEVEL2_NUM ...more than one interrupt at this level...*/ +/*#define XCHAL_INTLEVEL3_NUM ...more than one interrupt at this level...*/ + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 2 +#define XCHAL_INT2_LEVEL 3 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 2 +#define XCHAL_INT12_LEVEL 3 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 1 +#define XCHAL_INT15_LEVEL 2 +#define XCHAL_INT16_LEVEL 3 +#define XCHAL_INT17_LEVEL 0 +#define XCHAL_INT18_LEVEL 0 +#define XCHAL_INT19_LEVEL 0 +#define XCHAL_INT20_LEVEL 0 +#define XCHAL_INT21_LEVEL 0 +#define XCHAL_INT22_LEVEL 0 +#define XCHAL_INT23_LEVEL 0 +#define XCHAL_INT24_LEVEL 0 +#define XCHAL_INT25_LEVEL 0 +#define XCHAL_INT26_LEVEL 0 +#define XCHAL_INT27_LEVEL 0 +#define XCHAL_INT28_LEVEL 0 +#define XCHAL_INT29_LEVEL 0 +#define XCHAL_INT30_LEVEL 0 +#define XCHAL_INT31_LEVEL 0 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INT_LEVELS 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INT_TYPES XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F +#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 +#define XCHAL_INTTYPE_MASK_NMI 0x00000000 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTTYPE_MASKS 0xFFFE0000 XCHAL_SEP \ + 0x0001E000 XCHAL_SEP \ + 0x00000380 XCHAL_SEP \ + 0x0000007F XCHAL_SEP \ + 0x00001C00 XCHAL_SEP \ + 0x00000000 + +/* Interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3), -1 if unassigned */ +#define XCHAL_TIMER0_INTERRUPT 10 +#define XCHAL_TIMER1_INTERRUPT 11 +#define XCHAL_TIMER2_INTERRUPT 12 +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_TIMER_INTERRUPTS 10 XCHAL_SEP \ + 11 XCHAL_SEP \ + 12 XCHAL_SEP \ + XTHAL_TIMER_UNCONFIGURED + +/* Indexing macros: */ +#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK +#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */ +#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK +#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */ +#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL +#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */ +#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE +#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */ +#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT +#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */ + + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ + +/* Corresponding interrupt masks: */ +#define XCHAL_EXTINT0_MASK 0x00000001 +#define XCHAL_EXTINT1_MASK 0x00000002 +#define XCHAL_EXTINT2_MASK 0x00000004 +#define XCHAL_EXTINT3_MASK 0x00000008 +#define XCHAL_EXTINT4_MASK 0x00000010 +#define XCHAL_EXTINT5_MASK 0x00000020 +#define XCHAL_EXTINT6_MASK 0x00000040 +#define XCHAL_EXTINT7_MASK 0x00000080 +#define XCHAL_EXTINT8_MASK 0x00000100 +#define XCHAL_EXTINT9_MASK 0x00000200 + +/* Core config interrupt levels mapped to each external interrupt: */ +#define XCHAL_EXTINT0_LEVEL 1 /* (int number 0) */ +#define XCHAL_EXTINT1_LEVEL 2 /* (int number 1) */ +#define XCHAL_EXTINT2_LEVEL 3 /* (int number 2) */ +#define XCHAL_EXTINT3_LEVEL 1 /* (int number 3) */ +#define XCHAL_EXTINT4_LEVEL 1 /* (int number 4) */ +#define XCHAL_EXTINT5_LEVEL 1 /* (int number 5) */ +#define XCHAL_EXTINT6_LEVEL 1 /* (int number 6) */ +#define XCHAL_EXTINT7_LEVEL 1 /* (int number 7) */ +#define XCHAL_EXTINT8_LEVEL 2 /* (int number 8) */ +#define XCHAL_EXTINT9_LEVEL 3 /* (int number 9) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_EXCEPTIONS 1 /* 1 if exception option configured, 0 otherwise */ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture number: 1 for XEA1 (old), 2 for XEA2 (new) */ +#define XCHAL_HAVE_XEA1 0 /* 1 if XEA1, 0 otherwise */ +#define XCHAL_HAVE_XEA2 1 /* 1 if XEA2, 0 otherwise */ +/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */ +#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */ +#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */ + +#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 +#define XCHAL_USER_VECTOR_VADDR 0xD0000220 +#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_USER_VECTOR_PADDR 0x00000220 +#define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 +#define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 +#define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR + +/* Indexing macros: */ +#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR +#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */ + +/* + * General Exception Causes + * (values of EXCCAUSE special register set by general exceptions, + * which vector to the user, kernel, or double-exception vectors): + */ +#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction (IllegalInstruction) */ +#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call (SystemCall) */ +#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error (InstructionFetchError) */ +#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error (LoadStoreError) */ +#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt (Level1Interrupt) */ +#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist (Alloca) */ +#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero (IntegerDivideByZero) */ +#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation (Speculation) */ +#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction (Privileged) */ +#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store (Unaligned) */ +#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception (ITlbMiss) */ +#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception (ITlbMultihit) */ +#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception (ITlbPrivilege) */ +#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception (ITlbSizeRestriction) */ +#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception (FetchCacheAttribute) */ +#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception (DTlbMiss) */ +#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception (DTlbMultihit) */ +#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception (DTlbPrivilege) */ +#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception (DTlbSizeRestriction) */ +#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception (LoadCacheAttribute) */ +#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception (StoreCacheAttribute) */ +#define XCHAL_EXCCAUSE_FLOATING_POINT 40 /* Floating Point Exception (FloatingPoint) */ + + + +/*---------------------------------------------------------------------- + TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_CCOUNT 1 /* 1 if have CCOUNT, 0 otherwise */ +/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ + + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_DEBUG 1 /* 1 if debug option configured, 0 otherwise */ +#define XCHAL_HAVE_OCD 1 /* 1 if OnChipDebug option configured, 0 otherwise */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ +/*DebugExternalInterrupt 0 0|1*/ +/*DebugUseDIRArray 0 0|1*/ + + + + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_CP 0 /* 1 if coprocessor option configured (CPENABLE present) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one (per cfg) */ + +#include + + + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instruction ROMs configured */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instruction RAMs configured */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs configured */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs configured */ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports configured */ +#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */ +#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */ +#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */ +#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */ + + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +/* Size of the cache lines in log2(bytes): */ +#define XCHAL_ICACHE_LINEWIDTH 4 +#define XCHAL_DCACHE_LINEWIDTH 4 +/* Size of the cache lines in bytes: */ +#define XCHAL_ICACHE_LINESIZE 16 +#define XCHAL_DCACHE_LINESIZE 16 +/* Max for both I-cache and D-cache (used for general alignment): */ +#define XCHAL_CACHE_LINEWIDTH_MAX 4 +#define XCHAL_CACHE_LINESIZE_MAX 16 + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 8 +#define XCHAL_DCACHE_SETWIDTH 8 +/* Max for both I-cache and D-cache (used for general cache-coherency page alignment): */ +#define XCHAL_CACHE_SETWIDTH_MAX 8 +#define XCHAL_CACHE_SETSIZE_MAX 256 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Size of the caches in bytes (ways * 2^(linewidth + setwidth)): */ +#define XCHAL_ICACHE_SIZE 8192 +#define XCHAL_DCACHE_SIZE 8192 + +/* Cache features: */ +#define XCHAL_DCACHE_IS_WRITEBACK 0 +/* Whether cache locking feature is available: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 + +/* Number of (encoded) cache attribute bits: */ +#define XCHAL_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ +/* (The number of access mode bits (decoded cache attribute bits) is defined by the architecture; see xtensa/hal.h?) */ + + +/* Cache Attribute encodings -- lists of access modes for each cache attribute: */ +#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION +#define XCHAL_LCA_LIST XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_NACACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_NACACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_ISOLATE XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED +#define XCHAL_SCA_LIST XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_BYPASS XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_ISOLATE XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU + +/* Test: + read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 + read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 + all: 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 + fault: 0 + 2 + 4 + 6 + 8 + 10 + 12 + 14 + r/w/x cached: + r/w/x dcached: + I-bypass: 1 + 3 + + load guard bit set: 1 + 3 + load guard bit clr: 0 + 2 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 + hit-cache r/w/x: 7 + 11 + + fams: 5 + fams: 0 / 6 / 18 / 1 / 2 + fams: Bypass / Isolate / Cached / Exception / NACached + + MMU okay: yes +*/ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* + * General notes on MMU parameters. + * + * Terminology: + * ASID = address-space ID (acts as an "extension" of virtual addresses) + * VPN = virtual page number + * PPN = physical page number + * CA = encoded cache attribute (access modes) + * TLB = translation look-aside buffer (term is stretched somewhat here) + * I = instruction (fetch accesses) + * D = data (load and store accesses) + * way = each TLB (ITLB and DTLB) consists of a number of "ways" + * that simultaneously match the virtual address of an access; + * a TLB successfully translates a virtual address if exactly + * one way matches the vaddr; if none match, it is a miss; + * if multiple match, one gets a "multihit" exception; + * each way can be independently configured in terms of number of + * entries, page sizes, which fields are writable or constant, etc. + * set = group of contiguous ways with exactly identical parameters + * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE + * from the page table and storing it in one of the auto-refill ways; + * if this PTE load also misses, a miss exception is posted for s/w. + * min-wired = a "min-wired" way can be used to map a single (minimum-sized) + * page arbitrarily under program control; it has a single entry, + * is non-auto-refill (some other way(s) must be auto-refill), + * all its fields (VPN, PPN, ASID, CA) are all writable, and it + * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current + * restriction is that this be the only page size it supports). + * + * TLB way entries are virtually indexed. + * TLB ways that support multiple page sizes: + * - must have all writable VPN and PPN fields; + * - can only use one page size at any given time (eg. setup at startup), + * selected by the respective ITLBCFG or DTLBCFG special register, + * whose bits n*4+3 .. n*4 index the list of page sizes for way n + * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n); + * this list may be sparse for auto-refill ways because auto-refill + * ways have independent lists of supported page sizes sharing a + * common encoding with PTE entries; the encoding is the index into + * this list; unsupported sizes for a given way are zero in the list; + * selecting unsupported sizes results in undefined hardware behaviour; + * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition). + */ + +#define XCHAL_HAVE_CACHEATTR 0 /* 1 if CACHEATTR register present, 0 if TLBs present instead */ +#define XCHAL_HAVE_TLBS 1 /* 1 if TLBs present, 0 if CACHEATTR present instead */ +#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS /* (DEPRECATED; use XCHAL_HAVE_TLBS instead; will be removed in future release) */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* 1 if single way maps entire virtual address space in I+D */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* 1 if virtual addr == physical addr always, 0 otherwise */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config (CaMMU) */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config, but with translation (CaXltMMU) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs (address space IDs) */ +#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */ +#define XCHAL_MMU_ASID_KERNEL 1 /* ASID value indicating kernel (ring 0) address space */ +#define XCHAL_MMU_RINGS 4 /* number of rings supported (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* number of bits needed to hold ring number */ +#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */ +#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ +#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 12 /* max page size in a PTE structure (log2) */ +#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12 /* min page size in a PTE structure (log2) */ + + +/*** Instruction TLB: ***/ + +#define XCHAL_ITLB_WAY_BITS 3 /* number of bits holding the ways */ +#define XCHAL_ITLB_WAYS 7 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_ITLB_ARF_WAYS 4 /* number of auto-refill ways */ +#define XCHAL_ITLB_SETS 4 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_ITLB_WAY0_SET 0 +#define XCHAL_ITLB_WAY1_SET 0 +#define XCHAL_ITLB_WAY2_SET 0 +#define XCHAL_ITLB_WAY3_SET 0 +#define XCHAL_ITLB_WAY4_SET 1 +#define XCHAL_ITLB_WAY5_SET 2 +#define XCHAL_ITLB_WAY6_SET 3 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_ITLB_ARF_SETS 1 /* number of auto-refill sets */ +#define XCHAL_ITLB_ARF_SET0 0 /* index of n'th auto-refill set */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ + + +/* ITLB way set 0 (group of ways 0 thru 3): */ +#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_ITLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* ITLB way set 1 (group of ways 4 thru 4): */ +#define XCHAL_ITLB_SET1_WAY 4 /* index of first way in this way set */ +#define XCHAL_ITLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* ITLB way set 2 (group of ways 5 thru 5): */ +#define XCHAL_ITLB_SET2_WAY 5 /* index of first way in this way set */ +#define XCHAL_ITLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of ITLB way set 2 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_ASID_CONST 0x01 +#define XCHAL_ITLB_SET2_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of ITLB way set 2 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_VPN_CONST 0xD0000000 +#define XCHAL_ITLB_SET2_E1_VPN_CONST 0xD8000000 +/* Constant PPN values for each entry of ITLB way set 2 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_PPN_CONST 0x00000000 +#define XCHAL_ITLB_SET2_E1_PPN_CONST 0x00000000 +/* Constant CA values for each entry of ITLB way set 2 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_CA_CONST 0x07 +#define XCHAL_ITLB_SET2_E1_CA_CONST 0x03 + +/* ITLB way set 3 (group of ways 6 thru 6): */ +#define XCHAL_ITLB_SET3_WAY 6 /* index of first way in this way set */ +#define XCHAL_ITLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of ITLB way set 3 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_ASID_CONST 0x01 +#define XCHAL_ITLB_SET3_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of ITLB way set 3 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_VPN_CONST 0xE0000000 +#define XCHAL_ITLB_SET3_E1_VPN_CONST 0xF0000000 +/* Constant PPN values for each entry of ITLB way set 3 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_PPN_CONST 0xF0000000 +#define XCHAL_ITLB_SET3_E1_PPN_CONST 0xF0000000 +/* Constant CA values for each entry of ITLB way set 3 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_CA_CONST 0x07 +#define XCHAL_ITLB_SET3_E1_CA_CONST 0x03 + +/* Indexing macros: */ +#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what +#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what ) +#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what +#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what ) +/* + * Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES) + * to get the value of XCHAL_ITLB_SET_ENTRIES where is the first auto-refill set. + */ + + +/*** Data TLB: ***/ + +#define XCHAL_DTLB_WAY_BITS 4 /* number of bits holding the ways */ +#define XCHAL_DTLB_WAYS 10 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_DTLB_ARF_WAYS 4 /* number of auto-refill ways */ +#define XCHAL_DTLB_SETS 5 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_DTLB_WAY0_SET 0 +#define XCHAL_DTLB_WAY1_SET 0 +#define XCHAL_DTLB_WAY2_SET 0 +#define XCHAL_DTLB_WAY3_SET 0 +#define XCHAL_DTLB_WAY4_SET 1 +#define XCHAL_DTLB_WAY5_SET 2 +#define XCHAL_DTLB_WAY6_SET 3 +#define XCHAL_DTLB_WAY7_SET 4 +#define XCHAL_DTLB_WAY8_SET 4 +#define XCHAL_DTLB_WAY9_SET 4 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_DTLB_ARF_SETS 1 /* number of auto-refill sets */ +#define XCHAL_DTLB_ARF_SET0 0 /* index of n'th auto-refill set */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_DTLB_MINWIRED_SETS 1 /* number of "min-wired" sets */ +#define XCHAL_DTLB_MINWIRED_SET0 4 /* index of n'th "min-wired" set */ + + +/* DTLB way set 0 (group of ways 0 thru 3): */ +#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_DTLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* DTLB way set 1 (group of ways 4 thru 4): */ +#define XCHAL_DTLB_SET1_WAY 4 /* index of first way in this way set */ +#define XCHAL_DTLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* DTLB way set 2 (group of ways 5 thru 5): */ +#define XCHAL_DTLB_SET2_WAY 5 /* index of first way in this way set */ +#define XCHAL_DTLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of DTLB way set 2 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_ASID_CONST 0x01 +#define XCHAL_DTLB_SET2_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of DTLB way set 2 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_VPN_CONST 0xD0000000 +#define XCHAL_DTLB_SET2_E1_VPN_CONST 0xD8000000 +/* Constant PPN values for each entry of DTLB way set 2 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_PPN_CONST 0x00000000 +#define XCHAL_DTLB_SET2_E1_PPN_CONST 0x00000000 +/* Constant CA values for each entry of DTLB way set 2 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_CA_CONST 0x07 +#define XCHAL_DTLB_SET2_E1_CA_CONST 0x03 + +/* DTLB way set 3 (group of ways 6 thru 6): */ +#define XCHAL_DTLB_SET3_WAY 6 /* index of first way in this way set */ +#define XCHAL_DTLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of DTLB way set 3 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_ASID_CONST 0x01 +#define XCHAL_DTLB_SET3_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of DTLB way set 3 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_VPN_CONST 0xE0000000 +#define XCHAL_DTLB_SET3_E1_VPN_CONST 0xF0000000 +/* Constant PPN values for each entry of DTLB way set 3 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_PPN_CONST 0xF0000000 +#define XCHAL_DTLB_SET3_E1_PPN_CONST 0xF0000000 +/* Constant CA values for each entry of DTLB way set 3 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_CA_CONST 0x07 +#define XCHAL_DTLB_SET3_E1_CA_CONST 0x03 + +/* DTLB way set 4 (group of ways 7 thru 9): */ +#define XCHAL_DTLB_SET4_WAY 7 /* index of first way in this way set */ +#define XCHAL_DTLB_SET4_WAYS 3 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET4_ENTRIES_LOG2 0 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET4_ENTRIES 1 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET4_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET4_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET4_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET4_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* Indexing macros: */ +#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what +#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what ) +#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what +#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what ) +/* + * Example use: XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES) + * to get the value of XCHAL_DTLB_SET_ENTRIES where is the first auto-refill set. + */ + + +/* + * Determine whether we have a full MMU (with Page Table and Protection) + * usable for an MMU-based OS: + */ +#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2 +# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */ +#else +# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */ +#endif + +/* + * For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings: + */ +#if XCHAL_HAVE_PTP_MMU +#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */ +#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */ +#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */ +#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */ +#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */ +#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */ + +#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */ +#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */ +#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */ +#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */ +#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */ +#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */ + +#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */ +#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */ +/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */ +#endif + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* number of write buffer entries */ + +#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier + (CoreID) set in the Xtensa Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ + +/* These definitions describe the hardware targeted by this software: */ +#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ +#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ +#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ +#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ +#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ +#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ +#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ +#define XTHAL_HW_REL_T1050 1 +#define XTHAL_HW_REL_T1050_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 + + +/* + * Miscellaneous special register fields: + */ + + +/* DBREAKC (special register number 160): */ +#define XCHAL_DBREAKC_VALIDMASK 0xC000003F /* bits of DBREAKC that are defined */ +/* MASK field: */ +#define XCHAL_DBREAKC_MASK_BITS 6 /* number of bits in MASK field */ +#define XCHAL_DBREAKC_MASK_NUM 64 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_MASK_SHIFT 0 /* position of MASK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_MASK_MASK 0x0000003F /* mask of bits in MASK field of DBREAKC */ +/* LOADBREAK field: */ +#define XCHAL_DBREAKC_LOADBREAK_BITS 1 /* number of bits in LOADBREAK field */ +#define XCHAL_DBREAKC_LOADBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30 /* position of LOADBREAK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000 /* mask of bits in LOADBREAK field of DBREAKC */ +/* STOREBREAK field: */ +#define XCHAL_DBREAKC_STOREBREAK_BITS 1 /* number of bits in STOREBREAK field */ +#define XCHAL_DBREAKC_STOREBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31 /* position of STOREBREAK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000 /* mask of bits in STOREBREAK field of DBREAKC */ + +/* PS (special register number 230): */ +#define XCHAL_PS_VALIDMASK 0x00070FFF /* bits of PS that are defined */ +/* INTLEVEL field: */ +#define XCHAL_PS_INTLEVEL_BITS 4 /* number of bits in INTLEVEL field */ +#define XCHAL_PS_INTLEVEL_NUM 16 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_INTLEVEL_SHIFT 0 /* position of INTLEVEL bits in PS, starting from lsbit */ +#define XCHAL_PS_INTLEVEL_MASK 0x0000000F /* mask of bits in INTLEVEL field of PS */ +/* EXCM field: */ +#define XCHAL_PS_EXCM_BITS 1 /* number of bits in EXCM field */ +#define XCHAL_PS_EXCM_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_EXCM_SHIFT 4 /* position of EXCM bits in PS, starting from lsbit */ +#define XCHAL_PS_EXCM_MASK 0x00000010 /* mask of bits in EXCM field of PS */ +/* PROGSTACK field: */ +#define XCHAL_PS_PROGSTACK_BITS 1 /* number of bits in PROGSTACK field */ +#define XCHAL_PS_PROGSTACK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_PROGSTACK_SHIFT 5 /* position of PROGSTACK bits in PS, starting from lsbit */ +#define XCHAL_PS_PROGSTACK_MASK 0x00000020 /* mask of bits in PROGSTACK field of PS */ +/* RING field: */ +#define XCHAL_PS_RING_BITS 2 /* number of bits in RING field */ +#define XCHAL_PS_RING_NUM 4 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_RING_SHIFT 6 /* position of RING bits in PS, starting from lsbit */ +#define XCHAL_PS_RING_MASK 0x000000C0 /* mask of bits in RING field of PS */ +/* OWB field: */ +#define XCHAL_PS_OWB_BITS 4 /* number of bits in OWB field */ +#define XCHAL_PS_OWB_NUM 16 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_OWB_SHIFT 8 /* position of OWB bits in PS, starting from lsbit */ +#define XCHAL_PS_OWB_MASK 0x00000F00 /* mask of bits in OWB field of PS */ +/* CALLINC field: */ +#define XCHAL_PS_CALLINC_BITS 2 /* number of bits in CALLINC field */ +#define XCHAL_PS_CALLINC_NUM 4 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_CALLINC_SHIFT 16 /* position of CALLINC bits in PS, starting from lsbit */ +#define XCHAL_PS_CALLINC_MASK 0x00030000 /* mask of bits in CALLINC field of PS */ +/* WOE field: */ +#define XCHAL_PS_WOE_BITS 1 /* number of bits in WOE field */ +#define XCHAL_PS_WOE_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_WOE_SHIFT 18 /* position of WOE bits in PS, starting from lsbit */ +#define XCHAL_PS_WOE_MASK 0x00040000 /* mask of bits in WOE field of PS */ + +/* EXCCAUSE (special register number 232): */ +#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F /* bits of EXCCAUSE that are defined */ +/* EXCCAUSE field: */ +#define XCHAL_EXCCAUSE_BITS 6 /* number of bits in EXCCAUSE register */ +#define XCHAL_EXCCAUSE_NUM 64 /* max number of possible causes (2^bits) */ +#define XCHAL_EXCCAUSE_SHIFT 0 /* position of EXCCAUSE bits in register, starting from lsbit */ +#define XCHAL_EXCCAUSE_MASK 0x0000003F /* mask of bits in EXCCAUSE register */ + +/* DEBUGCAUSE (special register number 233): */ +#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F /* bits of DEBUGCAUSE that are defined */ +/* ICOUNT field: */ +#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1 /* number of bits in ICOUNT field */ +#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0 /* position of ICOUNT bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001 /* mask of bits in ICOUNT field of DEBUGCAUSE */ +/* IBREAK field: */ +#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1 /* number of bits in IBREAK field */ +#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1 /* position of IBREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002 /* mask of bits in IBREAK field of DEBUGCAUSE */ +/* DBREAK field: */ +#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1 /* number of bits in DBREAK field */ +#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2 /* position of DBREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004 /* mask of bits in DBREAK field of DEBUGCAUSE */ +/* BREAK field: */ +#define XCHAL_DEBUGCAUSE_BREAK_BITS 1 /* number of bits in BREAK field */ +#define XCHAL_DEBUGCAUSE_BREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3 /* position of BREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008 /* mask of bits in BREAK field of DEBUGCAUSE */ +/* BREAKN field: */ +#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1 /* number of bits in BREAKN field */ +#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4 /* position of BREAKN bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010 /* mask of bits in BREAKN field of DEBUGCAUSE */ +/* DEBUGINT field: */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1 /* number of bits in DEBUGINT field */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5 /* position of DEBUGINT bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020 /* mask of bits in DEBUGINT field of DEBUGCAUSE */ + + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_DENSITY 1 /* 1 if density option configured, 0 otherwise */ +#define XCHAL_HAVE_LOOPS 1 /* 1 if zero-overhead loops option configured, 0 otherwise */ +/* Misc instructions: */ +#define XCHAL_HAVE_NSA 0 /* 1 if NSA/NSAU instructions option configured, 0 otherwise */ +#define XCHAL_HAVE_MINMAX 0 /* 1 if MIN/MAX instructions option configured, 0 otherwise */ +#define XCHAL_HAVE_SEXT 0 /* 1 if sign-extend instruction option configured, 0 otherwise */ +#define XCHAL_HAVE_CLAMPS 0 /* 1 if CLAMPS instruction option configured, 0 otherwise */ +#define XCHAL_HAVE_MAC16 0 /* 1 if MAC16 option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL16 0 /* 1 if 16-bit integer multiply option configured, 0 otherwise */ +/*#define XCHAL_HAVE_POPC 0*/ /* 1 if CRC instruction option configured, 0 otherwise */ +/*#define XCHAL_HAVE_CRC 0*/ /* 1 if POPC instruction option configured, 0 otherwise */ + +#define XCHAL_HAVE_SPECULATION 0 /* 1 if speculation option configured, 0 otherwise */ +/*#define XCHAL_HAVE_MP_SYNC 0*/ /* 1 if multiprocessor sync. option configured, 0 otherwise */ +#define XCHAL_HAVE_PRID 0 /* 1 if processor ID register configured, 0 otherwise */ + +#define XCHAL_NUM_MISC_REGS 2 /* number of miscellaneous registers (0..4) */ + +/* These relate a bit more to TIE: */ +#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ +#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ + + +/*---------------------------------------------------------------------- + DERIVED + ----------------------------------------------------------------------*/ + +#if XCHAL_HAVE_BE +#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */ +#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */ +#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */ +#else +#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */ +#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */ +#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */ +#endif +/* Belongs in xtensa/hal.h: */ +#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */ + + +/* + * Because information as to exactly which hardware release is targeted + * by a given software build is not always available, compile-time HAL + * Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE): + */ +#ifndef XCHAL_HW_RELEASE_MAJOR +# define XCHAL_HW_CONFIGID_RELIABLE 0 +#endif +#if XCHAL_HW_CONFIGID_RELIABLE +# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_RELEASE_MAJOR == (major)) ? 1 : 0) +#else +# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \ + : ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \ + : XTHAL_MAYBE ) +# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \ + : (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \ + : XTHAL_MAYBE ) +# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \ + ((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE) +# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0) +#endif + +/* + * Specific errata: + */ + +/* + * Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1; + * relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled): + */ +#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \ + (XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \ + || XCHAL_HW_RELEASE_AT(1050,0))) + + + +#endif /*XTENSA_CONFIG_CORE_H*/ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/defs.h b/include/asm-xtensa/xtensa/config-linux_be/defs.h new file mode 100644 index 000000000000..f7c58b273371 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/defs.h @@ -0,0 +1,270 @@ +/* Definitions for Xtensa instructions, types, and protos. */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +/* Do not modify. This is automatically generated.*/ + +#ifndef _XTENSA_BASE_HEADER +#define _XTENSA_BASE_HEADER + +#ifdef __XTENSA__ +#if defined(__GNUC__) && !defined(__XCC__) + +#define L8UI_ASM(arr, ars, imm) { \ + __asm__ volatile("l8ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L8UI(ars, imm) \ +({ \ + unsigned char _arr; \ + const unsigned char *_ars = ars; \ + L8UI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L16UI_ASM(arr, ars, imm) { \ + __asm__ volatile("l16ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L16UI(ars, imm) \ +({ \ + unsigned short _arr; \ + const unsigned short *_ars = ars; \ + L16UI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L16SI_ASM(arr, ars, imm) {\ + __asm__ volatile("l16si %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L16SI(ars, imm) \ +({ \ + signed short _arr; \ + const signed short *_ars = ars; \ + L16SI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L32I_ASM(arr, ars, imm) { \ + __asm__ volatile("l32i %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L32I(ars, imm) \ +({ \ + unsigned _arr; \ + const unsigned *_ars = ars; \ + L32I_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define S8I_ASM(arr, ars, imm) {\ + __asm__ volatile("s8i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S8I(arr, ars, imm) \ +({ \ + signed char _arr = arr; \ + const signed char *_ars = ars; \ + S8I_ASM(_arr, _ars, imm); \ +}) + +#define S16I_ASM(arr, ars, imm) {\ + __asm__ volatile("s16i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S16I(arr, ars, imm) \ +({ \ + signed short _arr = arr; \ + const signed short *_ars = ars; \ + S16I_ASM(_arr, _ars, imm); \ +}) + +#define S32I_ASM(arr, ars, imm) { \ + __asm__ volatile("s32i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S32I(arr, ars, imm) \ +({ \ + signed int _arr = arr; \ + const signed int *_ars = ars; \ + S32I_ASM(_arr, _ars, imm); \ +}) + +#define ADDI_ASM(art, ars, imm) {\ + __asm__ ("addi %0, %1, %2" : "=a" (art) : "a" (ars), "i" (imm)); \ +} + +#define XT_ADDI(ars, imm) \ +({ \ + unsigned _art; \ + unsigned _ars = ars; \ + ADDI_ASM(_art, _ars, imm); \ + _art; \ +}) + +#define ABS_ASM(arr, art) {\ + __asm__ ("abs %0, %1" : "=a" (arr) : "a" (art)); \ +} + +#define XT_ABS(art) \ +({ \ + unsigned _arr; \ + signed _art = art; \ + ABS_ASM(_arr, _art); \ + _arr; \ +}) + +/* Note: In the following macros that reference SAR, the magic "state" + register is used to capture the dependency on SAR. This is because + SAR is a 5-bit register and thus there are no C types that can be + used to represent it. It doesn't appear that the SAR register is + even relevant to GCC, but it is marked as "clobbered" just in + case. */ + +#define SRC_ASM(arr, ars, art) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("src %0, %1, %2" \ + : "=a" (arr) : "a" (ars), "a" (art), "t" (_xt_sar)); \ +} + +#define XT_SRC(ars, art) \ +({ \ + unsigned _arr; \ + unsigned _ars = ars; \ + unsigned _art = art; \ + SRC_ASM(_arr, _ars, _art); \ + _arr; \ +}) + +#define SSR_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssr %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSR(ars) \ +({ \ + unsigned _ars = ars; \ + SSR_ASM(_ars); \ +}) + +#define SSL_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssl %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSL(ars) \ +({ \ + unsigned _ars = ars; \ + SSL_ASM(_ars); \ +}) + +#define SSA8B_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssa8b %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSA8B(ars) \ +({ \ + unsigned _ars = ars; \ + SSA8B_ASM(_ars); \ +}) + +#define SSA8L_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssa8l %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSA8L(ars) \ +({ \ + unsigned _ars = ars; \ + SSA8L_ASM(_ars); \ +}) + +#define SSAI_ASM(imm) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssai %1" : "=t" (_xt_sar) : "i" (imm) : "sar"); \ +} + +#define XT_SSAI(imm) \ +({ \ + SSAI_ASM(imm); \ +}) + + + + + + + + +#endif /* __GNUC__ && !__XCC__ */ + +#ifdef __XCC__ + +/* Core load/store instructions */ +extern unsigned char _TIE_L8UI(const unsigned char * ars, immediate imm); +extern unsigned short _TIE_L16UI(const unsigned short * ars, immediate imm); +extern signed short _TIE_L16SI(const signed short * ars, immediate imm); +extern unsigned _TIE_L32I(const unsigned * ars, immediate imm); +extern void _TIE_S8I(unsigned char arr, unsigned char * ars, immediate imm); +extern void _TIE_S16I(unsigned short arr, unsigned short * ars, immediate imm); +extern void _TIE_S32I(unsigned arr, unsigned * ars, immediate imm); + +#define XT_L8UI _TIE_L8UI +#define XT_L16UI _TIE_L16UI +#define XT_L16SI _TIE_L16SI +#define XT_L32I _TIE_L32I +#define XT_S8I _TIE_S8I +#define XT_S16I _TIE_S16I +#define XT_S32I _TIE_S32I + +/* Add-immediate instruction */ +extern unsigned _TIE_ADDI(unsigned ars, immediate imm); +#define XT_ADDI _TIE_ADDI + +/* Absolute value instruction */ +extern unsigned _TIE_ABS(int art); +#define XT_ABS _TIE_ABS + +/* funnel shift instructions */ +extern unsigned _TIE_SRC(unsigned ars, unsigned art); +#define XT_SRC _TIE_SRC +extern void _TIE_SSR(unsigned ars); +#define XT_SSR _TIE_SSR +extern void _TIE_SSL(unsigned ars); +#define XT_SSL _TIE_SSL +extern void _TIE_SSA8B(unsigned ars); +#define XT_SSA8B _TIE_SSA8B +extern void _TIE_SSA8L(unsigned ars); +#define XT_SSA8L _TIE_SSA8L +extern void _TIE_SSAI(immediate imm); +#define XT_SSAI _TIE_SSAI + + +#endif /* __XCC__ */ + +#endif /* __XTENSA__ */ +#endif /* !_XTENSA_BASE_HEADER */ diff --git a/include/asm-xtensa/xtensa/config-linux_be/specreg.h b/include/asm-xtensa/xtensa/config-linux_be/specreg.h new file mode 100644 index 000000000000..fa4106aa9a02 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/specreg.h @@ -0,0 +1,99 @@ +/* + * Xtensa Special Register symbolic names + */ + +/* $Id: specreg.h,v 1.2 2003/03/07 19:15:18 joetaylor Exp $ */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +#ifndef XTENSA_SPECREG_H +#define XTENSA_SPECREG_H + +/* Include these special register bitfield definitions, for historical reasons: */ +#include + + +/* Special registers: */ +#define LBEG 0 +#define LEND 1 +#define LCOUNT 2 +#define SAR 3 +#define WINDOWBASE 72 +#define WINDOWSTART 73 +#define PTEVADDR 83 +#define RASID 90 +#define ITLBCFG 91 +#define DTLBCFG 92 +#define IBREAKENABLE 96 +#define DDR 104 +#define IBREAKA_0 128 +#define IBREAKA_1 129 +#define DBREAKA_0 144 +#define DBREAKA_1 145 +#define DBREAKC_0 160 +#define DBREAKC_1 161 +#define EPC_1 177 +#define EPC_2 178 +#define EPC_3 179 +#define EPC_4 180 +#define DEPC 192 +#define EPS_2 194 +#define EPS_3 195 +#define EPS_4 196 +#define EXCSAVE_1 209 +#define EXCSAVE_2 210 +#define EXCSAVE_3 211 +#define EXCSAVE_4 212 +#define INTERRUPT 226 +#define INTENABLE 228 +#define PS 230 +#define EXCCAUSE 232 +#define DEBUGCAUSE 233 +#define CCOUNT 234 +#define ICOUNT 236 +#define ICOUNTLEVEL 237 +#define EXCVADDR 238 +#define CCOMPARE_0 240 +#define CCOMPARE_1 241 +#define CCOMPARE_2 242 +#define MISC_REG_0 244 +#define MISC_REG_1 245 + +/* Special cases (bases of special register series): */ +#define IBREAKA 128 +#define DBREAKA 144 +#define DBREAKC 160 +#define EPC 176 +#define EPS 192 +#define EXCSAVE 208 +#define CCOMPARE 240 + +/* Special names for read-only and write-only interrupt registers: */ +#define INTREAD 226 +#define INTSET 226 +#define INTCLEAR 227 + +#endif /* XTENSA_SPECREG_H */ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h new file mode 100644 index 000000000000..cf9d4d308e3a --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/system.h @@ -0,0 +1,198 @@ +/* + * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration + * + * NOTE: The location and contents of this file are highly subject to change. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * The HAL itself has historically included this file in some instances, + * but this is not appropriate either, because the HAL is meant to be + * core-specific but system independent. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_SYSTEM_H +#define XTENSA_CONFIG_SYSTEM_H + +/*#include */ + + + +/*---------------------------------------------------------------------- + DEVICE ADDRESSES + ----------------------------------------------------------------------*/ + +/* + * Strange place to find these, but the configuration GUI + * allows moving these around to account for various core + * configurations. Specific boards (and their BSP software) + * will have specific meanings for these components. + */ + +/* I/O Block areas: */ +#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 +#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 + +#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 + +/* System ROM: */ +#define XSHAL_ROM_VADDR 0xEE000000 +#define XSHAL_ROM_PADDR 0xFE000000 +#define XSHAL_ROM_SIZE 0x00400000 +/* Largest available area (free of vectors): */ +#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C +#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 + +/* System RAM: */ +#define XSHAL_RAM_VADDR 0xD0000000 +#define XSHAL_RAM_PADDR 0x00000000 +#define XSHAL_RAM_VSIZE 0x08000000 +#define XSHAL_RAM_PSIZE 0x10000000 +#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE +/* Largest available area (free of vectors): */ +#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 +#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 + +/* + * Shadow system RAM (same device as system RAM, at different address). + * (Emulation boards need this for the SONIC Ethernet driver + * when data caches are configured for writeback mode.) + * NOTE: on full MMU configs, this points to the BYPASS virtual address + * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual + * addresses are viewed through the BYPASS static map rather than + * the CACHED static map. + */ +#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 +#define XSHAL_RAM_BYPASS_PADDR 0x00000000 +#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 + +/* Alternate system RAM (different device than system RAM): */ +#define XSHAL_ALTRAM_VADDR 0xCEE00000 +#define XSHAL_ALTRAM_PADDR 0xC0000000 +#define XSHAL_ALTRAM_SIZE 0x00200000 + + +/*---------------------------------------------------------------------- + * DEVICE-ADDRESS DEPENDENT... + * + * Values written to CACHEATTR special register (or its equivalent) + * to enable and disable caches in various modes. + *----------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + BACKWARD COMPATIBILITY ... + ----------------------------------------------------------------------*/ + +/* + * NOTE: the following two macros are DEPRECATED. Use the latter + * board-specific macros instead, which are specially tuned for the + * particular target environments' memory maps. + */ +#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ +#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ + +/*---------------------------------------------------------------------- + ISS (Instruction Set Simulator) SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ +#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ +#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ +#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ +#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For Coware only: */ +#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ +#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ +#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ +#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ +#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For BFM and other purposes: */ +#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ +#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ + +#define XSHAL_ISS_PIPE_REGIONS 0 +#define XSHAL_ISS_SDRAM_REGIONS 0 + + +/*---------------------------------------------------------------------- + XT2000 BOARD SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ +#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ +#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ +#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ +#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ +#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ + + +/*---------------------------------------------------------------------- + VECTOR SIZES + ----------------------------------------------------------------------*/ + +/* + * Sizes allocated to vectors by the system (memory map) configuration. + * These sizes are constrained by core configuration (eg. one vector's + * code cannot overflow into another vector) but are dependent on the + * system or board (or LSP) memory map configuration. + * + * Whether or not each vector happens to be in a system ROM is also + * a system configuration matter, sometimes useful, included here also: + */ +#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 +#define XSHAL_RESET_VECTOR_ISROM 1 +#define XSHAL_USER_VECTOR_SIZE 0x0000001C +#define XSHAL_USER_VECTOR_ISROM 0 +#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C +#define XSHAL_KERNEL_VECTOR_ISROM 0 +#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 +#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 +#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 +#define XSHAL_WINDOW_VECTORS_ISROM 0 +#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 +#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE +#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM + + +#endif /*XTENSA_CONFIG_SYSTEM_H*/ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h new file mode 100644 index 000000000000..3c2e514602f4 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/tie.h @@ -0,0 +1,275 @@ +/* + * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration + * + * This header file is sometimes referred to as the "compile-time HAL" or CHAL. + * It was generated for a specific Xtensa processor configuration, + * and furthermore for a specific set of TIE source files that extend + * basic core functionality. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL source itself to include this file. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_TIE_H +#define XTENSA_CONFIG_TIE_H + +#include + + +/*---------------------------------------------------------------------- + GENERAL + ----------------------------------------------------------------------*/ + +/* + * Separators for macros that expand into arrays. + * These can be predefined by files that #include this one, + * when different separators are required. + */ +/* Element separator for macros that expand into 1-dimensional arrays: */ +#ifndef XCHAL_SEP +#define XCHAL_SEP , +#endif +/* Array separator for macros that expand into 2-dimensional arrays: */ +#ifndef XCHAL_SEP2 +#define XCHAL_SEP2 },{ +#endif + + + + + + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */ +#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */ + +/* Space for coprocessors' state save areas: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP7_SA_SIZE 0 +/* Minimum required alignments of CP state save areas: */ +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Indexing macros: */ +#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE +#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */ +#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN +#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */ + + +/* Space for "extra" state (user special registers and non-cp TIE) save area: */ +#define XCHAL_EXTRA_SA_SIZE 0 +#define XCHAL_EXTRA_SA_ALIGN 1 + +/* Total save area size (extra + all coprocessors) */ +/* (not useful until xthal_{save,restore}_all_extra() is implemented, */ +/* but included for Tor2 beta; doesn't account for alignment!): */ +#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */ + +/* Combined required alignment for all CP and EXTRA state save areas */ +/* (does not include required alignment for any base config registers): */ +#define XCHAL_CPEXTRA_SA_ALIGN 1 + +/* ... */ + + +#ifdef _ASMLANGUAGE +/* + * Assembly-language specific definitions (assembly macros, etc.). + */ +#include + +/******************** + * Macros to save and restore the non-coprocessor TIE portion of EXTRA state. + */ + +/* (none) */ + + +/******************** + * Macros to create functions that save and restore all EXTRA (non-coprocessor) state + * (does not include zero-overhead loop registers and non-optional registers). + */ + + /* + * Macro that expands to the body of a function that + * stores the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area in which to save extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function that + * loads the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area from which to restore extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_load_funcbody + .endm + + +/******************** + * Macros to save and restore the state of each TIE coprocessor. + */ + + + +/******************** + * Macros to create functions that save and restore the state of *any* TIE coprocessor. + */ + + /* + * Macro that expands to the body of a function + * that stores the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area in which to save cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function + * that loads the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area from which to restore cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_load_funcbody + .endm + +#endif /*_ASMLANGUAGE*/ + + +/* + * Contents of save areas in terms of libdb register numbers. + * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file; + * it is up to the user of this header file to define these macros + * usefully before each expansion of the CONTENTS_LIBDB macros. + * (Fields rsv[123] are reserved for future additions; they are currently + * set to zero but may be set to some useful values in the future.) + * + * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3) + */ + +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */ + + + + + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#if 0 /* is there something equivalent for user TIE? */ +#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier + (CoreID) set in the Xtensa Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ + +/* These definitions describe the hardware targeted by this software: */ +#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ +#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ +#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ +#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ +#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ +#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ +#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ +#define XTHAL_HW_REL_T1050 1 +#define XTHAL_HW_REL_T1050_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +#endif /*0*/ + + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#if 0 /* these probably don't belong here, but are related to or implemented using TIE */ +#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ +/* Misc instructions: */ +#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ + +#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ +#endif /*0*/ + + +#endif /*XTENSA_CONFIG_TIE_H*/ + diff --git a/include/asm-xtensa/xtensa/coreasm.h b/include/asm-xtensa/xtensa/coreasm.h new file mode 100644 index 000000000000..a8cfb54c20a1 --- /dev/null +++ b/include/asm-xtensa/xtensa/coreasm.h @@ -0,0 +1,526 @@ +#ifndef XTENSA_COREASM_H +#define XTENSA_COREASM_H + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/coreasm.h -- assembler-specific + * definitions that depend on CORE configuration. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL itself to include this + * file. + * + * This file must NOT include xtensa/config/system.h. Any assembler + * header file that depends on system information should likely go in + * a new systemasm.h (or sysasm.h) header file. + * + * NOTE: macro beqi32 is NOT configuration-dependent, and is placed + * here til we will have configuration-independent header file. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include +#include + +/* + * Assembly-language specific definitions (assembly macros, etc.). + */ + +/*---------------------------------------------------------------------- + * find_ms_setbit + * + * This macro finds the most significant bit that is set in + * and return its index + in , or - 1 if is zero. + * The index counts starting at zero for the lsbit, so the return + * value ranges from -1 (no bit set) to +31 (msbit set). + * + * Parameters: + * destination address register (any register) + * source address register + * temporary address register (must be different than ) + * constant value added to result (usually 0 or 1) + * On entry: + * = undefined if different than + * = value whose most significant set bit is to be found + * = undefined + * no other registers are used by this macro. + * On exit: + * = + index of msbit set in original , + * = - 1 if original was zero. + * clobbered (if not ) + * clobbered (if not ) + * Example: + * find_ms_setbit a0, a4, a0, 0 -- return in a0 index of msbit set in a4 + */ + + .macro find_ms_setbit ad, as, at, base +#if XCHAL_HAVE_NSA + movi \at, 31+\base + nsau \as, \as // get index of \as, numbered from msbit (32 if absent) + sub \ad, \at, \as // get numbering from lsbit (0..31, -1 if absent) +#else /* XCHAL_HAVE_NSA */ + movi \at, \base // start with result of 0 (point to lsbit of 32) + + beqz \as, 2f // special case for zero argument: return -1 + bltui \as, 0x10000, 1f // is it one of the 16 lsbits? (if so, check lower 16 bits) + addi \at, \at, 16 // no, increment result to upper 16 bits (of 32) + //srli \as, \as, 16 // check upper half (shift right 16 bits) + extui \as, \as, 16, 16 // check upper half (shift right 16 bits) +1: bltui \as, 0x100, 1f // is it one of the 8 lsbits? (if so, check lower 8 bits) + addi \at, \at, 8 // no, increment result to upper 8 bits (of 16) + srli \as, \as, 8 // shift right to check upper 8 bits +1: bltui \as, 0x10, 1f // is it one of the 4 lsbits? (if so, check lower 4 bits) + addi \at, \at, 4 // no, increment result to upper 4 bits (of 8) + srli \as, \as, 4 // shift right 4 bits to check upper half +1: bltui \as, 0x4, 1f // is it one of the 2 lsbits? (if so, check lower 2 bits) + addi \at, \at, 2 // no, increment result to upper 2 bits (of 4) + srli \as, \as, 2 // shift right 2 bits to check upper half +1: bltui \as, 0x2, 1f // is it the lsbit? + addi \at, \at, 2 // no, increment result to upper bit (of 2) +2: addi \at, \at, -1 // (from just above: add 1; from beqz: return -1) + //srli \as, \as, 1 +1: // done! \at contains index of msbit set (or -1 if none set) + .if 0x\ad - 0x\at // destination different than \at ? (works because regs are a0-a15) + mov \ad, \at // then move result to \ad + .endif +#endif /* XCHAL_HAVE_NSA */ + .endm // find_ms_setbit + +/*---------------------------------------------------------------------- + * find_ls_setbit + * + * This macro finds the least significant bit that is set in , + * and return its index in . + * Usage is the same as for the find_ms_setbit macro. + * Example: + * find_ls_setbit a0, a4, a0, 0 -- return in a0 index of lsbit set in a4 + */ + + .macro find_ls_setbit ad, as, at, base + neg \at, \as // keep only the least-significant bit that is set... + and \as, \at, \as // ... in \as + find_ms_setbit \ad, \as, \at, \base + .endm // find_ls_setbit + +/*---------------------------------------------------------------------- + * find_ls_one + * + * Same as find_ls_setbit with base zero. + * Source (as) and destination (ad) registers must be different. + * Provided for backward compatibility. + */ + + .macro find_ls_one ad, as + find_ls_setbit \ad, \as, \ad, 0 + .endm // find_ls_one + +/*---------------------------------------------------------------------- + * floop, floopnez, floopgtz, floopend + * + * These macros are used for fast inner loops that + * work whether or not the Loops options is configured. + * If the Loops option is configured, they simply use + * the zero-overhead LOOP instructions; otherwise + * they use explicit decrement and branch instructions. + * + * They are used in pairs, with floop, floopnez or floopgtz + * at the beginning of the loop, and floopend at the end. + * + * Each pair of loop macro calls must be given the loop count + * address register and a unique label for that loop. + * + * Example: + * + * movi a3, 16 // loop 16 times + * floop a3, myloop1 + * : + * bnez a7, end1 // exit loop if a7 != 0 + * : + * floopend a3, myloop1 + * end1: + * + * Like the LOOP instructions, these macros cannot be + * nested, must include at least one instruction, + * cannot call functions inside the loop, etc. + * The loop can be exited by jumping to the instruction + * following floopend (or elsewhere outside the loop), + * or continued by jumping to a NOP instruction placed + * immediately before floopend. + * + * Unlike LOOP instructions, the register passed to floop* + * cannot be used inside the loop, because it is used as + * the loop counter if the Loops option is not configured. + * And its value is undefined after exiting the loop. + * And because the loop counter register is active inside + * the loop, you can't easily use this construct to loop + * across a register file using ROTW as you might with LOOP + * instructions, unless you copy the loop register along. + */ + + /* Named label version of the macros: */ + + .macro floop ar, endlabel + floop_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel + .endm + + .macro floopnez ar, endlabel + floopnez_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel + .endm + + .macro floopgtz ar, endlabel + floopgtz_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel + .endm + + .macro floopend ar, endlabel + floopend_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel + .endm + + /* Numbered local label version of the macros: */ +#if 0 /*UNTESTED*/ + .macro floop89 ar + floop_ \ar, 8, 9f + .endm + + .macro floopnez89 ar + floopnez_ \ar, 8, 9f + .endm + + .macro floopgtz89 ar + floopgtz_ \ar, 8, 9f + .endm + + .macro floopend89 ar + floopend_ \ar, 8b, 9 + .endm +#endif /*0*/ + + /* Underlying version of the macros: */ + + .macro floop_ ar, startlabel, endlabelref + .ifdef _infloop_ + .if _infloop_ + .err // Error: floop cannot be nested + .endif + .endif + .set _infloop_, 1 +#if XCHAL_HAVE_LOOPS + loop \ar, \endlabelref +#else /* XCHAL_HAVE_LOOPS */ +\startlabel: + addi \ar, \ar, -1 +#endif /* XCHAL_HAVE_LOOPS */ + .endm // floop_ + + .macro floopnez_ ar, startlabel, endlabelref + .ifdef _infloop_ + .if _infloop_ + .err // Error: floopnez cannot be nested + .endif + .endif + .set _infloop_, 1 +#if XCHAL_HAVE_LOOPS + loopnez \ar, \endlabelref +#else /* XCHAL_HAVE_LOOPS */ + beqz \ar, \endlabelref +\startlabel: + addi \ar, \ar, -1 +#endif /* XCHAL_HAVE_LOOPS */ + .endm // floopnez_ + + .macro floopgtz_ ar, startlabel, endlabelref + .ifdef _infloop_ + .if _infloop_ + .err // Error: floopgtz cannot be nested + .endif + .endif + .set _infloop_, 1 +#if XCHAL_HAVE_LOOPS + loopgtz \ar, \endlabelref +#else /* XCHAL_HAVE_LOOPS */ + bltz \ar, \endlabelref + beqz \ar, \endlabelref +\startlabel: + addi \ar, \ar, -1 +#endif /* XCHAL_HAVE_LOOPS */ + .endm // floopgtz_ + + + .macro floopend_ ar, startlabelref, endlabel + .ifndef _infloop_ + .err // Error: floopend without matching floopXXX + .endif + .ifeq _infloop_ + .err // Error: floopend without matching floopXXX + .endif + .set _infloop_, 0 +#if ! XCHAL_HAVE_LOOPS + bnez \ar, \startlabelref +#endif /* XCHAL_HAVE_LOOPS */ +\endlabel: + .endm // floopend_ + +/*---------------------------------------------------------------------- + * crsil -- conditional RSIL (read/set interrupt level) + * + * Executes the RSIL instruction if it exists, else just reads PS. + * The RSIL instruction does not exist in the new exception architecture + * if the interrupt option is not selected. + */ + + .macro crsil ar, newlevel +#if XCHAL_HAVE_OLD_EXC_ARCH || XCHAL_HAVE_INTERRUPTS + rsil \ar, \newlevel +#else + rsr \ar, PS +#endif + .endm // crsil + +/*---------------------------------------------------------------------- + * window_spill{4,8,12} + * + * These macros spill callers' register windows to the stack. + * They work for both privileged and non-privileged tasks. + * Must be called from a windowed ABI context, eg. within + * a windowed ABI function (ie. valid stack frame, window + * exceptions enabled, not in exception mode, etc). + * + * This macro requires a single invocation of the window_spill_common + * macro in the same assembly unit and section. + * + * Note that using window_spill{4,8,12} macros is more efficient + * than calling a function implemented using window_spill_function, + * because the latter needs extra code to figure out the size of + * the call to the spilling function. + * + * Example usage: + * + * .text + * .align 4 + * .global some_function + * .type some_function,@function + * some_function: + * entry a1, 16 + * : + * : + * + * window_spill4 // spill windows of some_function's callers; preserves a0..a3 only; + * // to use window_spill{8,12} in this example function we'd have + * // to increase space allocated by the entry instruction, because + * // 16 bytes only allows call4; 32 or 48 bytes (+locals) are needed + * // for call8/window_spill8 or call12/window_spill12 respectively. + * : + * + * retw + * + * window_spill_common // instantiates code used by window_spill4 + * + * + * On entry: + * none (if window_spill4) + * stack frame has enough space allocated for call8 (if window_spill8) + * stack frame has enough space allocated for call12 (if window_spill12) + * On exit: + * a4..a15 clobbered (if window_spill4) + * a8..a15 clobbered (if window_spill8) + * a12..a15 clobbered (if window_spill12) + * no caller windows are in live registers + */ + + .macro window_spill4 +#if XCHAL_HAVE_WINDOWED +# if XCHAL_NUM_AREGS == 16 + movi a15, 0 // for 16-register files, no need to call to reach the end +# elif XCHAL_NUM_AREGS == 32 + call4 .L__wdwspill_assist28 // call deep enough to clear out any live callers +# elif XCHAL_NUM_AREGS == 64 + call4 .L__wdwspill_assist60 // call deep enough to clear out any live callers +# endif +#endif + .endm // window_spill4 + + .macro window_spill8 +#if XCHAL_HAVE_WINDOWED +# if XCHAL_NUM_AREGS == 16 + movi a15, 0 // for 16-register files, no need to call to reach the end +# elif XCHAL_NUM_AREGS == 32 + call8 .L__wdwspill_assist24 // call deep enough to clear out any live callers +# elif XCHAL_NUM_AREGS == 64 + call8 .L__wdwspill_assist56 // call deep enough to clear out any live callers +# endif +#endif + .endm // window_spill8 + + .macro window_spill12 +#if XCHAL_HAVE_WINDOWED +# if XCHAL_NUM_AREGS == 16 + movi a15, 0 // for 16-register files, no need to call to reach the end +# elif XCHAL_NUM_AREGS == 32 + call12 .L__wdwspill_assist20 // call deep enough to clear out any live callers +# elif XCHAL_NUM_AREGS == 64 + call12 .L__wdwspill_assist52 // call deep enough to clear out any live callers +# endif +#endif + .endm // window_spill12 + +/*---------------------------------------------------------------------- + * window_spill_function + * + * This macro outputs a function that will spill its caller's callers' + * register windows to the stack. Eg. it could be used to implement + * a version of xthal_window_spill() that works in non-privileged tasks. + * This works for both privileged and non-privileged tasks. + * + * Typical usage: + * + * .text + * .align 4 + * .global my_spill_function + * .type my_spill_function,@function + * my_spill_function: + * window_spill_function + * + * On entry to resulting function: + * none + * On exit from resulting function: + * none (no caller windows are in live registers) + */ + + .macro window_spill_function +#if XCHAL_HAVE_WINDOWED +# if XCHAL_NUM_AREGS == 32 + entry sp, 48 + bbci.l a0, 31, 1f // branch if called with call4 + bbsi.l a0, 30, 2f // branch if called with call12 + call8 .L__wdwspill_assist16 // called with call8, only need another 8 + retw +1: call12 .L__wdwspill_assist16 // called with call4, only need another 12 + retw +2: call4 .L__wdwspill_assist16 // called with call12, only need another 4 + retw +# elif XCHAL_NUM_AREGS == 64 + entry sp, 48 + bbci.l a0, 31, 1f // branch if called with call4 + bbsi.l a0, 30, 2f // branch if called with call12 + call4 .L__wdwspill_assist52 // called with call8, only need a call4 + retw +1: call8 .L__wdwspill_assist52 // called with call4, only need a call8 + retw +2: call12 .L__wdwspill_assist40 // called with call12, can skip a call12 + retw +# elif XCHAL_NUM_AREGS == 16 + entry sp, 16 + bbci.l a0, 31, 1f // branch if called with call4 + bbsi.l a0, 30, 2f // branch if called with call12 + movi a7, 0 // called with call8 + retw +1: movi a11, 0 // called with call4 +2: retw // if called with call12, everything already spilled + +// movi a15, 0 // trick to spill all but the direct caller +// j 1f +// // The entry instruction is magical in the assembler (gets auto-aligned) +// // so we have to jump to it to avoid falling through the padding. +// // We need entry/retw to know where to return. +//1: entry sp, 16 +// retw +# else +# error "unrecognized address register file size" +# endif +#endif /* XCHAL_HAVE_WINDOWED */ + window_spill_common + .endm // window_spill_function + +/*---------------------------------------------------------------------- + * window_spill_common + * + * Common code used by any number of invocations of the window_spill## + * and window_spill_function macros. + * + * Must be instantiated exactly once within a given assembly unit, + * within call/j range of and same section as window_spill## + * macro invocations for that assembly unit. + * (Is automatically instantiated by the window_spill_function macro.) + */ + + .macro window_spill_common +#if XCHAL_HAVE_WINDOWED && (XCHAL_NUM_AREGS == 32 || XCHAL_NUM_AREGS == 64) + .ifndef .L__wdwspill_defined +# if XCHAL_NUM_AREGS >= 64 +.L__wdwspill_assist60: + entry sp, 32 + call8 .L__wdwspill_assist52 + retw +.L__wdwspill_assist56: + entry sp, 16 + call4 .L__wdwspill_assist52 + retw +.L__wdwspill_assist52: + entry sp, 48 + call12 .L__wdwspill_assist40 + retw +.L__wdwspill_assist40: + entry sp, 48 + call12 .L__wdwspill_assist28 + retw +# endif +.L__wdwspill_assist28: + entry sp, 48 + call12 .L__wdwspill_assist16 + retw +.L__wdwspill_assist24: + entry sp, 32 + call8 .L__wdwspill_assist16 + retw +.L__wdwspill_assist20: + entry sp, 16 + call4 .L__wdwspill_assist16 + retw +.L__wdwspill_assist16: + entry sp, 16 + movi a15, 0 + retw + .set .L__wdwspill_defined, 1 + .endif +#endif /* XCHAL_HAVE_WINDOWED with 32 or 64 aregs */ + .endm // window_spill_common + +/*---------------------------------------------------------------------- + * beqi32 + * + * macro implements version of beqi for arbitrary 32-bit immidiate value + * + * beqi32 ax, ay, imm32, label + * + * Compares value in register ax with imm32 value and jumps to label if + * equal. Clobberes register ay if needed + * + */ + .macro beqi32 ax, ay, imm, label + .ifeq ((\imm-1) & ~7) // 1..8 ? + beqi \ax, \imm, \label + .else + .ifeq (\imm+1) // -1 ? + beqi \ax, \imm, \label + .else + .ifeq (\imm) // 0 ? + beqz \ax, \label + .else + // We could also handle immediates 10,12,16,32,64,128,256 + // but it would be a long macro... + movi \ay, \imm + beq \ax, \ay, \label + .endif + .endif + .endif + .endm // beqi32 + +#endif /*XTENSA_COREASM_H*/ + diff --git a/include/asm-xtensa/xtensa/corebits.h b/include/asm-xtensa/xtensa/corebits.h new file mode 100644 index 000000000000..e578ade41632 --- /dev/null +++ b/include/asm-xtensa/xtensa/corebits.h @@ -0,0 +1,77 @@ +#ifndef XTENSA_COREBITS_H +#define XTENSA_COREBITS_H + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * xtensa/corebits.h - Xtensa Special Register field positions and masks. + * + * (In previous releases, these were defined in specreg.h, a generated file. + * This file is not generated, i.e. it is processor configuration independent.) + */ + + +/* EXCCAUSE register fields: */ +#define EXCCAUSE_EXCCAUSE_SHIFT 0 +#define EXCCAUSE_EXCCAUSE_MASK 0x3F +/* Exception causes (mostly incomplete!): */ +#define EXCCAUSE_ILLEGAL 0 +#define EXCCAUSE_SYSCALL 1 +#define EXCCAUSE_IFETCHERROR 2 +#define EXCCAUSE_LOADSTOREERROR 3 +#define EXCCAUSE_LEVEL1INTERRUPT 4 +#define EXCCAUSE_ALLOCA 5 + +/* PS register fields: */ +#define PS_WOE_SHIFT 18 +#define PS_WOE_MASK 0x00040000 +#define PS_WOE PS_WOE_MASK +#define PS_CALLINC_SHIFT 16 +#define PS_CALLINC_MASK 0x00030000 +#define PS_CALLINC(n) (((n)&3)<4) 0 2 or >3 (TBD) + * T1030.0 0 1 (HAL beta) + * T1030.{1,2} 0 3 Equivalent to first release. + * T1030.n (n>=3) 0 >= 3 (TBD) + * T1040.n 1040 n Full CHAL available from T1040.2 + * T1050.n 1050 n Current release. + * + * + * Note: there is a distinction between the software release with + * which something is compiled (accessible using XTHAL_RELEASE_* macros) + * and the software release with which the HAL library was compiled + * (accessible using Xthal_release_* global variables). This + * distinction is particularly relevant for vendors that distribute + * configuration-independent binaries (eg. an OS), where their customer + * might link it with a HAL of a different Xtensa software release. + * In this case, it may be appropriate for the OS to verify at run-time + * whether XTHAL_RELEASE_* and Xthal_release_* are compatible. + * [Guidelines as to which release is compatible with which are not + * currently provided explicitly, but might be inferred from reading + * OSKit documentation for all releases -- compatibility is also highly + * dependent on which HAL features are used. Each release is usually + * backward compatible, with very few exceptions if any.] + * + * Notes: + * Tornado 2.0 supported in T1020.3+, T1030.1+, and T1040.{0,1} only. + * Tornado 2.0.2 supported in T1040.2+, and T1050. + * Compile-time HAL port of NucleusPlus supported by T1040.2+ and T1050. + */ + + +/* + * Architectural limits, independent of configuration. + * Note that these are ISA-defined limits, not micro-architecture implementation + * limits enforced by the Xtensa Processor Generator (which may be stricter than + * these below). + */ +#define XTHAL_MAX_CPS 8 /* max number of coprocessors (0..7) */ +#define XTHAL_MAX_INTERRUPTS 32 /* max number of interrupts (0..31) */ +#define XTHAL_MAX_INTLEVELS 16 /* max number of interrupt levels (0..15) */ + /* (as of T1040, implementation limit is 7: 0..6) */ +#define XTHAL_MAX_TIMERS 4 /* max number of timers (CCOMPARE0..CCOMPARE3) */ + /* (as of T1040, implementation limit is 3: 0..2) */ + +/* Misc: */ +#define XTHAL_LITTLEENDIAN 0 +#define XTHAL_BIGENDIAN 1 + + +/* Interrupt types: */ +#define XTHAL_INTTYPE_UNCONFIGURED 0 +#define XTHAL_INTTYPE_SOFTWARE 1 +#define XTHAL_INTTYPE_EXTERN_EDGE 2 +#define XTHAL_INTTYPE_EXTERN_LEVEL 3 +#define XTHAL_INTTYPE_TIMER 4 +#define XTHAL_INTTYPE_NMI 5 +#define XTHAL_MAX_INTTYPES 6 /* number of interrupt types */ + +/* Timer related: */ +#define XTHAL_TIMER_UNCONFIGURED -1 /* Xthal_timer_interrupt[] value for non-existent timers */ +#define XTHAL_TIMER_UNASSIGNED XTHAL_TIMER_UNCONFIGURED /* (for backwards compatibility only) */ + + +/* Access Mode bits (tentative): */ /* bit abbr unit short_name PPC equ - Description */ +#define XTHAL_AMB_EXCEPTION 0 /* 001 E EX fls: EXception none - generate exception on any access (aka "illegal") */ +#define XTHAL_AMB_HITCACHE 1 /* 002 C CH fls: use Cache on Hit ~(I CI) - use cache on hit -- way from tag match [or H HC, or U UC] (ISA: same, except for Isolate case) */ +#define XTHAL_AMB_ALLOCATE 2 /* 004 A AL fl?: ALlocate none - refill cache on miss -- way from LRU [or F FI fill] (ISA: Read/Write Miss Refill) */ +#define XTHAL_AMB_WRITETHRU 3 /* 008 W WT --s: WriteThrough W WT - store immediately to memory (ISA: same) */ +#define XTHAL_AMB_ISOLATE 4 /* 010 I IS fls: ISolate none - use cache regardless of hit-vs-miss -- way from vaddr (ISA: use-cache-on-miss+hit) */ +#define XTHAL_AMB_GUARD 5 /* 020 G GU ?l?: GUard G * - non-speculative; spec/replay refs not permitted */ +#if 0 +#define XTHAL_AMB_ORDERED x /* 000 O OR fls: ORdered G * - mem accesses cannot be out of order */ +#define XTHAL_AMB_FUSEWRITES x /* 000 F FW --s: FuseWrites none - allow combining/merging multiple writes (to same datapath data unit) into one (implied by writeback) */ +#define XTHAL_AMB_COHERENT x /* 000 M MC fl?: Mem/MP Coherent M - on reads, other CPUs/bus-masters may need to supply data */ +#define XTHAL_AMB_TRUSTED x /* 000 T TR ?l?: TRusted none - memory will not bus error (if it does, handle as fatal imprecise interrupt) */ +#define XTHAL_AMB_PREFETCH x /* 000 P PR fl?: PRefetch none - on refill, read line+1 into prefetch buffers */ +#define XTHAL_AMB_STREAM x /* 000 S ST ???: STreaming none - access one of N stream buffers */ +#endif /*0*/ + +#define XTHAL_AM_EXCEPTION (1< = bit is set + * '-' = bit is clear + * '.' = bit is irrelevant / don't care, as follows: + * E=1 makes all others irrelevant + * W,F relevant only for stores + * "2345" + * Indicates which Xtensa releases support the corresponding + * access mode. Releases for each character column are: + * 2 = prior to T1020.2: T1015 (V1.5), T1020.0, T1020.1 + * 3 = T1020.2 and later: T1020.2+, T1030 + * 4 = T1040 + * 5 = T1050 (maybe) + * And the character column contents are: + * = support by release(s) + * "." = unsupported by release(s) + * "?" = support unknown + */ + /* FOGIWACE 2345 */ +/* For instruction fetch: */ +#define XTHAL_FAM_EXCEPTION 0x001 /* .......E 2345 exception */ +#define XTHAL_FAM_ISOLATE 0x012 /* .--I.-C- .... isolate */ +#define XTHAL_FAM_BYPASS 0x000 /* .---.--- 2345 bypass */ +#define XTHAL_FAM_NACACHED 0x002 /* .---.-C- .... cached no-allocate (frozen) */ +#define XTHAL_FAM_CACHED 0x006 /* .---.AC- 2345 cached */ +/* For data load: */ +#define XTHAL_LAM_EXCEPTION 0x001 /* .......E 2345 exception */ +#define XTHAL_LAM_ISOLATE 0x012 /* .--I.-C- 2345 isolate */ +#define XTHAL_LAM_BYPASS 0x000 /* .O--.--- 2... bypass speculative */ +#define XTHAL_LAM_BYPASSG 0x020 /* .OG-.--- .345 bypass guarded */ +#define XTHAL_LAM_NACACHED 0x002 /* .O--.-C- 2... cached no-allocate speculative */ +#define XTHAL_LAM_NACACHEDG 0x022 /* .OG-.-C- .345 cached no-allocate guarded */ +#define XTHAL_LAM_CACHED 0x006 /* .---.AC- 2345 cached speculative */ +#define XTHAL_LAM_CACHEDG 0x026 /* .?G-.AC- .... cached guarded */ +/* For data store: */ +#define XTHAL_SAM_EXCEPTION 0x001 /* .......E 2345 exception */ +#define XTHAL_SAM_ISOLATE 0x032 /* .-GI--C- 2345 isolate */ +#define XTHAL_SAM_BYPASS 0x028 /* -OG-W--- 2345 bypass */ +/*efine XTHAL_SAM_BYPASSF 0x028*/ /* F-G-W--- ...? bypass write-combined */ +#define XTHAL_SAM_WRITETHRU 0x02A /* -OG-W-C- 234? writethrough */ +/*efine XTHAL_SAM_WRITETHRUF 0x02A*/ /* F-G-W-C- ...5 writethrough write-combined */ +#define XTHAL_SAM_WRITEALLOC 0x02E /* -OG-WAC- ...? writethrough-allocate */ +/*efine XTHAL_SAM_WRITEALLOCF 0x02E*/ /* F-G-WAC- ...? writethrough-allocate write-combined */ +#define XTHAL_SAM_WRITEBACK 0x026 /* F-G--AC- ...5 writeback */ + +#if 0 +/* + Cache attribute encoding for CACHEATTR (per ISA): + (Note: if this differs from ISA Ref Manual, ISA has precedence) + + Inst-fetches Loads Stores + ------------- ------------ ------------- +0x0 FCA_EXCEPTION ?LCA_NACACHED_G* SCA_WRITETHRU "uncached" +0x1 FCA_CACHED LCA_CACHED SCA_WRITETHRU cached +0x2 FCA_BYPASS LCA_BYPASS_G* SCA_BYPASS bypass +0x3 FCA_CACHED LCA_CACHED SCA_WRITEALLOCF write-allocate + or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) +0x4 FCA_CACHED LCA_CACHED SCA_WRITEBACK write-back + or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) +0x5..D FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION (reserved) +0xE FCA_EXCEPTION LCA_ISOLATE SCA_ISOLATE isolate +0xF FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION illegal + * Prior to T1020.2?, guard feature not supported, this defaulted to speculative (no _G) +*/ +#endif /*0*/ + + +#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) +#ifdef __cplusplus +extern "C" { +#endif + +/*---------------------------------------------------------------------- + HAL + ----------------------------------------------------------------------*/ + +/* Constant to be checked in build = (XTHAL_MAJOR_REV<<16)|XTHAL_MINOR_REV */ +extern const unsigned int Xthal_rev_no; + + +/*---------------------------------------------------------------------- + Processor State + ----------------------------------------------------------------------*/ +/* save & restore the extra processor state */ +extern void xthal_save_extra(void *base); +extern void xthal_restore_extra(void *base); + +extern void xthal_save_cpregs(void *base, int); +extern void xthal_restore_cpregs(void *base, int); + +/*extern void xthal_save_all_extra(void *base);*/ +/*extern void xthal_restore_all_extra(void *base);*/ + +/* space for processor state */ +extern const unsigned int Xthal_extra_size; +extern const unsigned int Xthal_extra_align; +/* space for TIE register files */ +extern const unsigned int Xthal_cpregs_size[XTHAL_MAX_CPS]; +extern const unsigned int Xthal_cpregs_align[XTHAL_MAX_CPS]; + +/* total of space for the processor state (for Tor2) */ +extern const unsigned int Xthal_all_extra_size; +extern const unsigned int Xthal_all_extra_align; + +/* initialize the extra processor */ +/*extern void xthal_init_extra(void);*/ +/* initialize the TIE coprocessor */ +/*extern void xthal_init_cp(int);*/ + +/* initialize the extra processor */ +extern void xthal_init_mem_extra(void *); +/* initialize the TIE coprocessor */ +extern void xthal_init_mem_cp(void *, int); + +/* validate & invalidate the TIE register file */ +extern void xthal_validate_cp(int); +extern void xthal_invalidate_cp(int); + +/* the number of TIE coprocessors contiguous from zero (for Tor2) */ +extern const unsigned int Xthal_num_coprocessors; + +/* actual number of coprocessors */ +extern const unsigned char Xthal_cp_num; +/* index of highest numbered coprocessor, plus one */ +extern const unsigned char Xthal_cp_max; +/* index of highest allowed coprocessor number, per cfg, plus one */ +/*extern const unsigned char Xthal_cp_maxcfg;*/ +/* bitmask of which coprocessors are present */ +extern const unsigned int Xthal_cp_mask; + +/* read and write cpenable register */ +extern void xthal_set_cpenable(unsigned); +extern unsigned xthal_get_cpenable(void); + +/* read & write extra state register */ +/*extern int xthal_read_extra(void *base, unsigned reg, unsigned *value);*/ +/*extern int xthal_write_extra(void *base, unsigned reg, unsigned value);*/ + +/* read & write a TIE coprocessor register */ +/*extern int xthal_read_cpreg(void *base, int cp, unsigned reg, unsigned *value);*/ +/*extern int xthal_write_cpreg(void *base, int cp, unsigned reg, unsigned value);*/ + +/* return coprocessor number based on register */ +/*extern int xthal_which_cp(unsigned reg);*/ + +/*---------------------------------------------------------------------- + Interrupts + ----------------------------------------------------------------------*/ + +/* the number of interrupt levels */ +extern const unsigned char Xthal_num_intlevels; +/* the number of interrupts */ +extern const unsigned char Xthal_num_interrupts; + +/* mask for level of interrupts */ +extern const unsigned int Xthal_intlevel_mask[XTHAL_MAX_INTLEVELS]; +/* mask for level 0 to N interrupts */ +extern const unsigned int Xthal_intlevel_andbelow_mask[XTHAL_MAX_INTLEVELS]; + +/* level of each interrupt */ +extern const unsigned char Xthal_intlevel[XTHAL_MAX_INTERRUPTS]; + +/* type per interrupt */ +extern const unsigned char Xthal_inttype[XTHAL_MAX_INTERRUPTS]; + +/* masks of each type of interrupt */ +extern const unsigned int Xthal_inttype_mask[XTHAL_MAX_INTTYPES]; + +/* interrupt numbers assigned to each timer interrupt */ +extern const int Xthal_timer_interrupt[XTHAL_MAX_TIMERS]; + +/*** Virtual interrupt prioritization: ***/ + +/* Convert between interrupt levels (as per PS.INTLEVEL) and virtual interrupt priorities: */ +extern unsigned xthal_vpri_to_intlevel(unsigned vpri); +extern unsigned xthal_intlevel_to_vpri(unsigned intlevel); + +/* Enables/disables given set (mask) of interrupts; returns previous enabled-mask of all ints: */ +extern unsigned xthal_int_enable(unsigned); +extern unsigned xthal_int_disable(unsigned); + +/* Set/get virtual priority of an interrupt: */ +extern int xthal_set_int_vpri(int intnum, int vpri); +extern int xthal_get_int_vpri(int intnum); + +/* Set/get interrupt lockout level for exclusive access to virtual priority data structures: */ +extern void xthal_set_vpri_locklevel(unsigned intlevel); +extern unsigned xthal_get_vpri_locklevel(void); + +/* Set/get current virtual interrupt priority: */ +extern unsigned xthal_set_vpri(unsigned vpri); +extern unsigned xthal_get_vpri(unsigned vpri); +extern unsigned xthal_set_vpri_intlevel(unsigned intlevel); +extern unsigned xthal_set_vpri_lock(void); + + + +/*---------------------------------------------------------------------- + Generic Interrupt Trampolining Support + ----------------------------------------------------------------------*/ + +typedef void (XtHalVoidFunc)(void); + +/* + * Bitmask of interrupts currently trampolining down: + */ +extern unsigned Xthal_tram_pending; + +/* + * Bitmask of which interrupts currently trampolining down + * synchronously are actually enabled; this bitmask is necessary + * because INTENABLE cannot hold that state (sync-trampolining + * interrupts must be kept disabled while trampolining); + * in the current implementation, any bit set here is not set + * in INTENABLE, and vice-versa; once a sync-trampoline is + * handled (at level one), its enable bit must be moved from + * here to INTENABLE: + */ +extern unsigned Xthal_tram_enabled; + +/* + * Bitmask of interrupts configured for sync trampolining: + */ +extern unsigned Xthal_tram_sync; + + +/* Trampoline support functions: */ +extern unsigned xthal_tram_pending_to_service( void ); +extern void xthal_tram_done( unsigned serviced_mask ); +extern int xthal_tram_set_sync( int intnum, int sync ); +extern XtHalVoidFunc* xthal_set_tram_trigger_func( XtHalVoidFunc *trigger_fn ); + +/* INTENABLE,INTREAD,INTSET,INTCLEAR register access functions: */ +extern unsigned xthal_get_intenable( void ); +extern void xthal_set_intenable( unsigned ); +extern unsigned xthal_get_intread( void ); +extern void xthal_set_intset( unsigned ); +extern void xthal_set_intclear( unsigned ); + + +/*---------------------------------------------------------------------- + Register Windows + ----------------------------------------------------------------------*/ + +/* number of registers in register window */ +extern const unsigned int Xthal_num_aregs; +extern const unsigned char Xthal_num_aregs_log2; + +/* This spill any live register windows (other than the caller's): */ +extern void xthal_window_spill( void ); + + +/*---------------------------------------------------------------------- + Cache + ----------------------------------------------------------------------*/ + +/* size of the cache lines in log2(bytes) */ +extern const unsigned char Xthal_icache_linewidth; +extern const unsigned char Xthal_dcache_linewidth; +/* size of the cache lines in bytes */ +extern const unsigned short Xthal_icache_linesize; +extern const unsigned short Xthal_dcache_linesize; +/* number of cache sets in log2(lines per way) */ +extern const unsigned char Xthal_icache_setwidth; +extern const unsigned char Xthal_dcache_setwidth; +/* cache set associativity (number of ways) */ +extern const unsigned int Xthal_icache_ways; +extern const unsigned int Xthal_dcache_ways; +/* size of the caches in bytes (ways * 2^(linewidth + setwidth)) */ +extern const unsigned int Xthal_icache_size; +extern const unsigned int Xthal_dcache_size; +/* cache features */ +extern const unsigned char Xthal_dcache_is_writeback; +extern const unsigned char Xthal_icache_line_lockable; +extern const unsigned char Xthal_dcache_line_lockable; + +/* cache attribute register control (used by other HAL routines) */ +extern unsigned xthal_get_cacheattr( void ); +extern unsigned xthal_get_icacheattr( void ); +extern unsigned xthal_get_dcacheattr( void ); +extern void xthal_set_cacheattr( unsigned ); +extern void xthal_set_icacheattr( unsigned ); +extern void xthal_set_dcacheattr( unsigned ); + +/* initialize cache support (must be called once at startup, before all other cache calls) */ +/*extern void xthal_cache_startinit( void );*/ +/* reset caches */ +/*extern void xthal_icache_reset( void );*/ +/*extern void xthal_dcache_reset( void );*/ +/* enable caches */ +extern void xthal_icache_enable( void ); /* DEPRECATED */ +extern void xthal_dcache_enable( void ); /* DEPRECATED */ +/* disable caches */ +extern void xthal_icache_disable( void ); /* DEPRECATED */ +extern void xthal_dcache_disable( void ); /* DEPRECATED */ + +/* invalidate the caches */ +extern void xthal_icache_all_invalidate( void ); +extern void xthal_dcache_all_invalidate( void ); +extern void xthal_icache_region_invalidate( void *addr, unsigned size ); +extern void xthal_dcache_region_invalidate( void *addr, unsigned size ); +extern void xthal_icache_line_invalidate(void *addr); +extern void xthal_dcache_line_invalidate(void *addr); +/* write dirty data back */ +extern void xthal_dcache_all_writeback( void ); +extern void xthal_dcache_region_writeback( void *addr, unsigned size ); +extern void xthal_dcache_line_writeback(void *addr); +/* write dirty data back and invalidate */ +extern void xthal_dcache_all_writeback_inv( void ); +extern void xthal_dcache_region_writeback_inv( void *addr, unsigned size ); +extern void xthal_dcache_line_writeback_inv(void *addr); +/* prefetch and lock specified memory range into cache */ +extern void xthal_icache_region_lock( void *addr, unsigned size ); +extern void xthal_dcache_region_lock( void *addr, unsigned size ); +extern void xthal_icache_line_lock(void *addr); +extern void xthal_dcache_line_lock(void *addr); +/* unlock from cache */ +extern void xthal_icache_all_unlock( void ); +extern void xthal_dcache_all_unlock( void ); +extern void xthal_icache_region_unlock( void *addr, unsigned size ); +extern void xthal_dcache_region_unlock( void *addr, unsigned size ); +extern void xthal_icache_line_unlock(void *addr); +extern void xthal_dcache_line_unlock(void *addr); + + +/* sync icache and memory */ +extern void xthal_icache_sync( void ); +/* sync dcache and memory */ +extern void xthal_dcache_sync( void ); + +/*---------------------------------------------------------------------- + Debug + ----------------------------------------------------------------------*/ + +/* 1 if debug option configured, 0 if not: */ +extern const int Xthal_debug_configured; + +/* Number of instruction and data break registers: */ +extern const int Xthal_num_ibreak; +extern const int Xthal_num_dbreak; + +/* Set (plant) and remove software breakpoint, both synchronizing cache: */ +extern unsigned int xthal_set_soft_break(void *addr); +extern void xthal_remove_soft_break(void *addr, unsigned int); + + +/*---------------------------------------------------------------------- + Disassembler + ----------------------------------------------------------------------*/ + +/* Max expected size of the return buffer for a disassembled instruction (hint only): */ +#define XTHAL_DISASM_BUFSIZE 80 + +/* Disassembly option bits for selecting what to return: */ +#define XTHAL_DISASM_OPT_ADDR 0x0001 /* display address */ +#define XTHAL_DISASM_OPT_OPHEX 0x0002 /* display opcode bytes in hex */ +#define XTHAL_DISASM_OPT_OPCODE 0x0004 /* display opcode name (mnemonic) */ +#define XTHAL_DISASM_OPT_PARMS 0x0008 /* display parameters */ +#define XTHAL_DISASM_OPT_ALL 0x0FFF /* display everything */ + +/* routine to get a string for the disassembled instruction */ +extern int xthal_disassemble( unsigned char *instr_buf, void *tgt_addr, + char *buffer, unsigned buflen, unsigned options ); + +/* routine to get the size of the next instruction. Returns 0 for + illegal instruction */ +extern int xthal_disassemble_size( unsigned char *instr_buf ); + + +/*---------------------------------------------------------------------- + Core Counter + ----------------------------------------------------------------------*/ + +/* counter info */ +extern const unsigned char Xthal_have_ccount; /* set if CCOUNT register present */ +extern const unsigned char Xthal_num_ccompare; /* number of CCOMPAREn registers */ + +/* get CCOUNT register (if not present return 0) */ +extern unsigned xthal_get_ccount(void); + +/* set and get CCOMPAREn registers (if not present, get returns 0) */ +extern void xthal_set_ccompare(int, unsigned); +extern unsigned xthal_get_ccompare(int); + + +/*---------------------------------------------------------------------- + Instruction/Data RAM/ROM Access + ----------------------------------------------------------------------*/ + +extern void* xthal_memcpy(void *dst, const void *src, unsigned len); +extern void* xthal_bcopy(const void *src, void *dst, unsigned len); + +/*---------------------------------------------------------------------- + MP Synchronization + ----------------------------------------------------------------------*/ +extern int xthal_compare_and_set( int *addr, int test_val, int compare_val ); +extern unsigned xthal_get_prid( void ); + +/*extern const char Xthal_have_s32c1i;*/ +extern const unsigned char Xthal_have_prid; + + +/*---------------------------------------------------------------------- + Miscellaneous + ----------------------------------------------------------------------*/ + +extern const unsigned int Xthal_release_major; +extern const unsigned int Xthal_release_minor; +extern const char * const Xthal_release_name; +extern const char * const Xthal_release_internal; + +extern const unsigned char Xthal_memory_order; +extern const unsigned char Xthal_have_windowed; +extern const unsigned char Xthal_have_density; +extern const unsigned char Xthal_have_booleans; +extern const unsigned char Xthal_have_loops; +extern const unsigned char Xthal_have_nsa; +extern const unsigned char Xthal_have_minmax; +extern const unsigned char Xthal_have_sext; +extern const unsigned char Xthal_have_clamps; +extern const unsigned char Xthal_have_mac16; +extern const unsigned char Xthal_have_mul16; +extern const unsigned char Xthal_have_fp; +extern const unsigned char Xthal_have_speculation; +extern const unsigned char Xthal_have_exceptions; +extern const unsigned char Xthal_xea_version; +extern const unsigned char Xthal_have_interrupts; +extern const unsigned char Xthal_have_highlevel_interrupts; +extern const unsigned char Xthal_have_nmi; + +extern const unsigned short Xthal_num_writebuffer_entries; + +extern const unsigned int Xthal_build_unique_id; +/* Release info for hardware targeted by software upgrades: */ +extern const unsigned int Xthal_hw_configid0; +extern const unsigned int Xthal_hw_configid1; +extern const unsigned int Xthal_hw_release_major; +extern const unsigned int Xthal_hw_release_minor; +extern const char * const Xthal_hw_release_name; +extern const char * const Xthal_hw_release_internal; + + +/* Internal memories... */ + +extern const unsigned char Xthal_num_instrom; +extern const unsigned char Xthal_num_instram; +extern const unsigned char Xthal_num_datarom; +extern const unsigned char Xthal_num_dataram; +extern const unsigned char Xthal_num_xlmi; +extern const unsigned int Xthal_instrom_vaddr[1]; +extern const unsigned int Xthal_instrom_paddr[1]; +extern const unsigned int Xthal_instrom_size [1]; +extern const unsigned int Xthal_instram_vaddr[1]; +extern const unsigned int Xthal_instram_paddr[1]; +extern const unsigned int Xthal_instram_size [1]; +extern const unsigned int Xthal_datarom_vaddr[1]; +extern const unsigned int Xthal_datarom_paddr[1]; +extern const unsigned int Xthal_datarom_size [1]; +extern const unsigned int Xthal_dataram_vaddr[1]; +extern const unsigned int Xthal_dataram_paddr[1]; +extern const unsigned int Xthal_dataram_size [1]; +extern const unsigned int Xthal_xlmi_vaddr[1]; +extern const unsigned int Xthal_xlmi_paddr[1]; +extern const unsigned int Xthal_xlmi_size [1]; + + + +/*---------------------------------------------------------------------- + Memory Management Unit + ----------------------------------------------------------------------*/ + +extern const unsigned char Xthal_have_spanning_way; +extern const unsigned char Xthal_have_identity_map; +extern const unsigned char Xthal_have_mimic_cacheattr; +extern const unsigned char Xthal_have_xlt_cacheattr; +extern const unsigned char Xthal_have_cacheattr; +extern const unsigned char Xthal_have_tlbs; + +extern const unsigned char Xthal_mmu_asid_bits; /* 0 .. 8 */ +extern const unsigned char Xthal_mmu_asid_kernel; +extern const unsigned char Xthal_mmu_rings; /* 1 .. 4 (perhaps 0 if no MMU and/or no protection?) */ +extern const unsigned char Xthal_mmu_ring_bits; +extern const unsigned char Xthal_mmu_sr_bits; +extern const unsigned char Xthal_mmu_ca_bits; +extern const unsigned int Xthal_mmu_max_pte_page_size; +extern const unsigned int Xthal_mmu_min_pte_page_size; + +extern const unsigned char Xthal_itlb_way_bits; +extern const unsigned char Xthal_itlb_ways; +extern const unsigned char Xthal_itlb_arf_ways; +extern const unsigned char Xthal_dtlb_way_bits; +extern const unsigned char Xthal_dtlb_ways; +extern const unsigned char Xthal_dtlb_arf_ways; + +/* Convert between virtual and physical addresses (through static maps only): */ +/*** WARNING: these two functions may go away in a future release; don't depend on them! ***/ +extern int xthal_static_v2p( unsigned vaddr, unsigned *paddrp ); +extern int xthal_static_p2v( unsigned paddr, unsigned *vaddrp, unsigned cached ); + +#if 0 +/******************* EXPERIMENTAL AND TENTATIVE ONLY ********************/ + +#define XTHAL_MMU_PAGESZ_COUNT_MAX 8 /* maximum number of different page sizes */ +extern const char Xthal_mmu_pagesz_count; /* 0 .. 8 number of different page sizes configured */ + +/* Note: the following table doesn't necessarily have page sizes in increasing order: */ +extern const char Xthal_mmu_pagesz_log2[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 10 .. 28 (0 past count) */ + +/* Sorted (increasing) table of page sizes, that indexes into the above table: */ +extern const char Xthal_mmu_pagesz_sorted[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 0 .. 7 (0 past count) */ + +/*u32 Xthal_virtual_exceptions;*/ /* bitmask of which exceptions execute in virtual mode... */ + +extern const char Xthal_mmu_pte_pagesz_log2_min; /* ?? minimum page size in PTEs */ +extern const char Xthal_mmu_pte_pagesz_log2_max; /* ?? maximum page size in PTEs */ + +/* Cache Attribute Bits Implemented by the Cache (part of the cache abstraction) */ +extern const char Xthal_icache_fca_bits_implemented; /* ITLB/UTLB only! */ +extern const char Xthal_dcache_lca_bits_implemented; /* DTLB/UTLB only! */ +extern const char Xthal_dcache_sca_bits_implemented; /* DTLB/UTLB only! */ + +/* Per TLB Parameters (Instruction, Data, Unified) */ +struct XtHalMmuTlb Xthal_itlb; /* description of MMU I-TLB generic features */ +struct XtHalMmuTlb Xthal_dtlb; /* description of MMU D-TLB generic features */ +struct XtHalMmuTlb Xthal_utlb; /* description of MMU U-TLB generic features */ + +#define XTHAL_MMU_WAYS_MAX 8 /* maximum number of ways (associativities) for each TLB */ + +/* Structure for common information described for each possible TLB (instruction, data and unified): */ +typedef struct XtHalMmuTlb { + u8 va_bits; /* 32 (number of virtual address bits) */ + u8 pa_bits; /* 32 (number of physical address bits) */ + bool tlb_va_indexed; /* 1 (set if TLB is indexed by virtual address) */ + bool tlb_va_tagged; /* 0 (set if TLB is tagged by virtual address) */ + bool cache_va_indexed; /* 1 (set if cache is indexed by virtual address) */ + bool cache_va_tagged; /* 0 (set if cache is tagged by virtual address) */ + /*bool (whether page tables are traversed in vaddr sorted order, paddr sorted order, ...) */ + /*u8 (set of available page attribute bits, other than cache attribute bits defined above) */ + /*u32 (various masks for pages, MMU table/TLB entries, etc.) */ + u8 way_count; /* 0 .. 8 (number of ways, a.k.a. associativities, for this TLB) */ + XtHalMmuTlbWay * ways[XTHAL_MMU_WAYS_MAX]; /* pointers to per-way parms for each way */ +} XtHalMmuTlb; + +/* Per TLB Way (Per Associativity) Parameters */ +typedef struct XtHalMmuTlbWay { + u32 index_count_log2; /* 0 .. 4 */ + u32 pagesz_mask; /* 0 .. 2^pagesz_count - 1 (each bit corresponds to a size */ + /* defined in the Xthal_mmu_pagesz_log2[] table) */ + u32 vpn_const_mask; + u32 vpn_const_value; + u64 ppn_const_mask; /* future may support pa_bits > 32 */ + u64 ppn_const_value; + u32 ppn_id_mask; /* paddr bits taken directly from vaddr */ + bool backgnd_match; /* 0 or 1 */ + /* These are defined in terms of the XTHAL_CACHE_xxx bits: */ + u8 fca_const_mask; /* ITLB/UTLB only! */ + u8 fca_const_value; /* ITLB/UTLB only! */ + u8 lca_const_mask; /* DTLB/UTLB only! */ + u8 lca_const_value; /* DTLB/UTLB only! */ + u8 sca_const_mask; /* DTLB/UTLB only! */ + u8 sca_const_value; /* DTLB/UTLB only! */ + /* These define an encoding that map 5 bits in TLB and PTE entries to */ + /* 8 bits (FCA, ITLB), 16 bits (LCA+SCA, DTLB) or 24 bits (FCA+LCA+SCA, UTLB): */ + /* (they may be moved to struct XtHalMmuTlb) */ + u8 ca_bits; /* number of bits in TLB/PTE entries for cache attributes */ + u32 * ca_map; /* pointer to array of 2^ca_bits entries of FCA+LCA+SCA bits */ +} XtHalMmuTlbWay; + +/* + * The way to determine whether protection support is present in core + * is to [look at Xthal_mmu_rings ???]. + * Give info on memory requirements for MMU tables and other in-memory + * data structures (globally, per task, base and per page, etc.) - whatever bounds can be calculated. + */ + + +/* Default vectors: */ +xthal_immu_fetch_miss_vector +xthal_dmmu_load_miss_vector +xthal_dmmu_store_miss_vector + +/* Functions called when a fault is detected: */ +typedef void (XtHalMmuFaultFunc)( unsigned vaddr, ...context... ); +/* Or, */ +/* a? = vaddr */ +/* a? = context... */ +/* PS.xxx = xxx */ +XtHalMMuFaultFunc *Xthal_immu_fetch_fault_func; +XtHalMMuFaultFunc *Xthal_dmmu_load_fault_func; +XtHalMMuFaultFunc *Xthal_dmmu_store_fault_func; + +/* Default Handlers: */ +/* The user and/or kernel exception handlers may jump to these handlers to handle the relevant exceptions, + * according to the value of EXCCAUSE. The exact register state on entry to these handlers is TBD. */ +/* When multiple TLB entries match (hit) on the same access: */ +xthal_immu_fetch_multihit_handler +xthal_dmmu_load_multihit_handler +xthal_dmmu_store_multihit_handler +/* Protection violations according to cache attributes, and other cache attribute mismatches: */ +xthal_immu_fetch_attr_handler +xthal_dmmu_load_attr_handler +xthal_dmmu_store_attr_handler +/* Protection violations due to insufficient ring level: */ +xthal_immu_fetch_priv_handler +xthal_dmmu_load_priv_handler +xthal_dmmu_store_priv_handler +/* Alignment exception handlers (if supported by the particular Xtensa MMU configuration): */ +xthal_dmmu_load_align_handler +xthal_dmmu_store_align_handler + +/* Or, alternatively, the OS user and/or kernel exception handlers may simply jump to the + * following entry points which will handle any values of EXCCAUSE not handled by the OS: */ +xthal_user_exc_default_handler +xthal_kernel_exc_default_handler + +#endif /*0*/ + +#ifdef INCLUDE_DEPRECATED_HAL_CODE +extern const unsigned char Xthal_have_old_exc_arch; +extern const unsigned char Xthal_have_mmu; +extern const unsigned int Xthal_num_regs; +extern const unsigned char Xthal_num_iroms; +extern const unsigned char Xthal_num_irams; +extern const unsigned char Xthal_num_droms; +extern const unsigned char Xthal_num_drams; +extern const unsigned int Xthal_configid0; +extern const unsigned int Xthal_configid1; +#endif + +#ifdef INCLUDE_DEPRECATED_HAL_DEBUG_CODE +#define XTHAL_24_BIT_BREAK 0x80000000 +#define XTHAL_16_BIT_BREAK 0x40000000 +extern const unsigned short Xthal_ill_inst_16[16]; +#define XTHAL_DEST_REG 0xf0000000 /* Mask for destination register */ +#define XTHAL_DEST_REG_INST 0x08000000 /* Branch address is in register */ +#define XTHAL_DEST_REL_INST 0x04000000 /* Branch address is relative */ +#define XTHAL_RFW_INST 0x00000800 +#define XTHAL_RFUE_INST 0x00000400 +#define XTHAL_RFI_INST 0x00000200 +#define XTHAL_RFE_INST 0x00000100 +#define XTHAL_RET_INST 0x00000080 +#define XTHAL_BREAK_INST 0x00000040 +#define XTHAL_SYSCALL_INST 0x00000020 +#define XTHAL_LOOP_END 0x00000010 /* Not set by xthal_inst_type */ +#define XTHAL_JUMP_INST 0x00000008 /* Call or jump instruction */ +#define XTHAL_BRANCH_INST 0x00000004 /* Branch instruction */ +#define XTHAL_24_BIT_INST 0x00000002 +#define XTHAL_16_BIT_INST 0x00000001 +typedef struct xthal_state { + unsigned pc; + unsigned ar[16]; + unsigned lbeg; + unsigned lend; + unsigned lcount; + unsigned extra_ptr; + unsigned cpregs_ptr[XTHAL_MAX_CPS]; +} XTHAL_STATE; +extern unsigned int xthal_inst_type(void *addr); +extern unsigned int xthal_branch_addr(void *addr); +extern unsigned int xthal_get_npc(XTHAL_STATE *user_state); +#endif /* INCLUDE_DEPRECATED_HAL_DEBUG_CODE */ + +#ifdef __cplusplus +} +#endif +#endif /*!__ASSEMBLY__ */ + +#endif /*XTENSA_HAL_H*/ + diff --git a/include/asm-xtensa/xtensa/simcall.h b/include/asm-xtensa/xtensa/simcall.h new file mode 100644 index 000000000000..a2b868929a49 --- /dev/null +++ b/include/asm-xtensa/xtensa/simcall.h @@ -0,0 +1,130 @@ +#ifndef SIMCALL_INCLUDED +#define SIMCALL_INCLUDED + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/simcall.h - Simulator call numbers + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +/* + * System call like services offered by the simulator host. + * These are modeled after the Linux 2.4 kernel system calls + * for Xtensa processors. However not all system calls and + * not all functionality of a given system call are implemented, + * or necessarily have well defined or equivalent semantics in + * the context of a simulation (as opposed to a Unix kernel). + * + * These services behave largely as if they had been invoked + * as a task in the simulator host's operating system + * (eg. files accessed are those of the simulator host). + * However, these SIMCALLs model a virtual operating system + * so that various definitions, bit assignments etc + * (eg. open mode bits, errno values, etc) are independent + * of the host operating system used to run the simulation. + * Rather these definitions are specific to the Xtensa ISS. + * This way Xtensa ISA code written to use these SIMCALLs + * can (in principle) be simulated on any host. + * + * Up to 6 parameters are passed in registers a3 to a8 + * (note the 6th parameter isn't passed on the stack, + * unlike windowed function calling conventions). + * The return value is in a2. A negative value in the + * range -4096 to -1 indicates a negated error code to be + * reported in errno with a return value of -1, otherwise + * the value in a2 is returned as is. + */ + +/* These #defines need to match what's in Xtensa/OS/vxworks/xtiss/simcalls.c */ + +#define SYS_nop 0 /* n/a - setup; used to flush register windows */ +#define SYS_exit 1 /*x*/ +#define SYS_fork 2 +#define SYS_read 3 /*x*/ +#define SYS_write 4 /*x*/ +#define SYS_open 5 /*x*/ +#define SYS_close 6 /*x*/ +#define SYS_rename 7 /*x 38 - waitpid */ +#define SYS_creat 8 /*x*/ +#define SYS_link 9 /*x (not implemented on WIN32) */ +#define SYS_unlink 10 /*x*/ +#define SYS_execv 11 /* n/a - execve */ +#define SYS_execve 12 /* 11 - chdir */ +#define SYS_pipe 13 /* 42 - time */ +#define SYS_stat 14 /* 106 - mknod */ +#define SYS_chmod 15 +#define SYS_chown 16 /* 202 - lchown */ +#define SYS_utime 17 /* 30 - break */ +#define SYS_wait 18 /* n/a - oldstat */ +#define SYS_lseek 19 /*x*/ +#define SYS_getpid 20 +#define SYS_isatty 21 /* n/a - mount */ +#define SYS_fstat 22 /* 108 - oldumount */ +#define SYS_time 23 /* 13 - setuid */ +#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ +#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ +#define SYS_socket 26 +#define SYS_sendto 27 +#define SYS_recvfrom 28 +#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ +#define SYS_bind 30 +#define SYS_ioctl 31 + +/* + * Other... + */ +#define SYS_iss_argc 1000 /* returns value of argc */ +#define SYS_iss_argv_size 1001 /* bytes needed for argv & arg strings */ +#define SYS_iss_set_argv 1002 /* saves argv & arg strings at given addr */ + +/* + * SIMCALLs for the ferret memory debugger. All are invoked by + * libferret.a ... ( Xtensa/Target-Libs/ferret ) + */ +#define SYS_ferret 1010 +#define SYS_malloc 1011 +#define SYS_free 1012 +#define SYS_more_heap 1013 +#define SYS_no_heap 1014 + + +/* + * Extra SIMCALLs for GDB: + */ +#define SYS_gdb_break -1 /* invoked by XTOS on user exceptions if EPC points + to a break.n/break, regardless of cause! */ +#define SYS_xmon_out -2 /* invoked by XMON: ... */ +#define SYS_xmon_in -3 /* invoked by XMON: ... */ +#define SYS_xmon_flush -4 /* invoked by XMON: ... */ +#define SYS_gdb_abort -5 /* invoked by XTOS in _xtos_panic() */ +#define SYS_gdb_illegal_inst -6 /* invoked by XTOS for illegal instructions (too deeply) */ +#define SYS_xmon_init -7 /* invoked by XMON: ... */ +#define SYS_gdb_enter_sktloop -8 /* invoked by XTOS on debug exceptions */ + +/* + * SIMCALLs for vxWorks xtiss BSP: + */ +#define SYS_setup_ppp_pipes -83 +#define SYS_log_msg -84 + +/* + * Test SIMCALLs: + */ +#define SYS_test_write_state -100 +#define SYS_test_read_state -101 + +/* + * SYS_select_one specifiers + */ +#define XTISS_SELECT_ONE_READ 1 +#define XTISS_SELECT_ONE_WRITE 2 +#define XTISS_SELECT_ONE_EXCEPT 3 + +#endif /* !SIMCALL_INCLUDED */ diff --git a/include/asm-xtensa/xtensa/xt2000-uart.h b/include/asm-xtensa/xtensa/xt2000-uart.h new file mode 100644 index 000000000000..0154460f0ed8 --- /dev/null +++ b/include/asm-xtensa/xtensa/xt2000-uart.h @@ -0,0 +1,155 @@ +#ifndef _uart_h_included_ +#define _uart_h_included_ + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART + * definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include + + +/* 16550 UART DEVICE REGISTERS + The XT2000 board aligns each register to a 32-bit word but the UART device only uses + one byte of the word, which is the least-significant byte regardless of the + endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian). + So if using word accesses then endianness doesn't matter. + The macros provided here do that. +*/ +struct uart_dev_s { + union { + unsigned int rxb; /* DLAB=0: receive buffer, read-only */ + unsigned int txb; /* DLAB=0: transmit buffer, write-only */ + unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */ + } w0; + union { + unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */ + unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */ + } w1; + + union { + unsigned int isr; /* DLAB=0: interrupt status register, read-only */ + unsigned int fcr; /* DLAB=0: FIFO control register, write-only */ + unsigned int afr; /* DLAB=1: alternate function register */ + } w2; + + unsigned int lcr; /* line control-register, write-only */ + unsigned int mcr; /* modem control-regsiter, write-only */ + unsigned int lsr; /* line status register, read-only */ + unsigned int msr; /* modem status register, read-only */ + unsigned int scr; /* scratch regsiter, read/write */ +}; + +#define _RXB(u) ((u)->w0.rxb) +#define _TXB(u) ((u)->w0.txb) +#define _DLL(u) ((u)->w0.dll) +#define _IER(u) ((u)->w1.ier) +#define _DLM(u) ((u)->w1.dlm) +#define _ISR(u) ((u)->w2.isr) +#define _FCR(u) ((u)->w2.fcr) +#define _AFR(u) ((u)->w2.afr) +#define _LCR(u) ((u)->lcr) +#define _MCR(u) ((u)->mcr) +#define _LSR(u) ((u)->lsr) +#define _MSR(u) ((u)->msr) +#define _SCR(u) ((u)->scr) + +typedef volatile struct uart_dev_s uart_dev_t; + +/* IER bits */ +#define RCVR_DATA_REG_INTENABLE 0x01 +#define XMIT_HOLD_REG_INTENABLE 0x02 +#define RCVR_STATUS_INTENABLE 0x04 +#define MODEM_STATUS_INTENABLE 0x08 + +/* FCR bits */ +#define _FIFO_ENABLE 0x01 +#define RCVR_FIFO_RESET 0x02 +#define XMIT_FIFO_RESET 0x04 +#define DMA_MODE_SELECT 0x08 +#define RCVR_TRIGGER_LSB 0x40 +#define RCVR_TRIGGER_MSB 0x80 + +/* AFR bits */ +#define AFR_CONC_WRITE 0x01 +#define AFR_BAUDOUT_SEL 0x02 +#define AFR_RXRDY_SEL 0x04 + +/* ISR bits */ +#define INT_STATUS(r) ((r)&1) +#define INT_PRIORITY(r) (((r)>>1)&0x7) + +/* LCR bits */ +#define WORD_LENGTH(n) (((n)-5)&0x3) +#define STOP_BIT_ENABLE 0x04 +#define PARITY_ENABLE 0x08 +#define EVEN_PARITY 0x10 +#define FORCE_PARITY 0x20 +#define XMIT_BREAK 0x40 +#define DLAB_ENABLE 0x80 + +/* MCR bits */ +#define _DTR 0x01 +#define _RTS 0x02 +#define _OP1 0x04 +#define _OP2 0x08 +#define LOOP_BACK 0x10 + +/* LSR Bits */ +#define RCVR_DATA_READY 0x01 +#define OVERRUN_ERROR 0x02 +#define PARITY_ERROR 0x04 +#define FRAMING_ERROR 0x08 +#define BREAK_INTERRUPT 0x10 +#define XMIT_HOLD_EMPTY 0x20 +#define XMIT_EMPTY 0x40 +#define FIFO_ERROR 0x80 +#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY) +#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY) + +/* MSR bits */ +#define _RDR 0x01 +#define DELTA_DSR 0x02 +#define DELTA_RI 0x04 +#define DELTA_CD 0x08 +#define _CTS 0x10 +#define _DSR 0x20 +#define _RI 0x40 +#define _CD 0x80 + +/* prototypes */ +void uart_init( uart_dev_t *u, int bitrate ); +void uart_out( uart_dev_t *u, char c ); +void uart_puts( uart_dev_t *u, char *s ); +char uart_in( uart_dev_t *u ); +void uart_enable_rcvr_int( uart_dev_t *u ); +void uart_disable_rcvr_int( uart_dev_t *u ); + +#ifdef DUART16552_1_VADDR +/* DUART present. */ +#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR) +#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR) +#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s ) +#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s ) +#else +/* DUART not configured, use dummy placeholders to allow compiles to work. */ +#define DUART_1_BASE (*(uart_dev_t*)0) +#define DUART_2_BASE (*(uart_dev_t*)0) +#define UART1_PUTS(s) +#define UART2_PUTS(s) +#endif + +/* Compute 16-bit divisor for baudrate generator, with rounding: */ +#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed)) + +#endif /*_uart_h_included_*/ + diff --git a/include/asm-xtensa/xtensa/xt2000.h b/include/asm-xtensa/xtensa/xt2000.h new file mode 100644 index 000000000000..703a45002f8f --- /dev/null +++ b/include/asm-xtensa/xtensa/xt2000.h @@ -0,0 +1,408 @@ +#ifndef _INC_XT2000_H_ +#define _INC_XT2000_H_ + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the + * Tensilica XT2000 Emulation Board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include +#include + + +/* + * Default assignment of XT2000 devices to external interrupts. + */ + +/* Ethernet interrupt: */ +#ifdef XCHAL_EXTINT3_NUM +#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM +#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL +#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK +#else +#define SONIC83934_INTMASK 0 +#endif + +/* DUART channel 1 interrupt (P1 - console): */ +#ifdef XCHAL_EXTINT4_NUM +#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM +#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL +#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK +#else +#define DUART16552_1_INTMASK 0 +#endif + +/* DUART channel 2 interrupt (P2 - 2nd serial port): */ +#ifdef XCHAL_EXTINT5_NUM +#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM +#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL +#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK +#else +#define DUART16552_2_INTMASK 0 +#endif + +/* FPGA-combined PCI/etc interrupts: */ +#ifdef XCHAL_EXTINT6_NUM +#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM +#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL +#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK +#else +#define XT2000_FPGAPCI_INTMASK 0 +#endif + + + +/* + * Device addresses. + * + * Note: for endianness-independence, use 32-bit loads and stores for all + * register accesses to Ethernet, DUART and LED devices. Undefined bits + * may need to be masked out if needed when reading if the actual register + * size is smaller than 32 bits. + * + * Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte + * relative to the processor. So 32-bit registers are accessed consistently + * from both big and little endian processors. However, this means byte + * sequences are not consistent between big and little endian processors. + * This is fine for RAM, and for ROM if ROM is created for a specific + * processor (and thus has correct byte sequences). However this may be + * unexpected for Flash, which might contain a file-system that one wants + * to use for multiple processor configurations (eg. the Flash might contain + * the Ethernet card's address, endianness-independent application data, etc). + * That is, byte sequences written in Flash by a core of a given endianness + * will be byte-swapped when seen by a core of the other endianness. + * Someone implementing an endianness-independent Flash file system will + * likely handle this byte-swapping issue in the Flash driver software. + */ + +#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ +#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */ +#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */ +#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */ +#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */ +#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */ +#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */ + +#ifdef XSHAL_IOBLOCK_BYPASS_PADDR +/* PCI memory space: */ +# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000) +/* Socketed Flash (eg. 2 x 16-bit devices): */ +# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000) +/* PCI I/O space: */ +# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000) +/* V3 PCI interface chip register/config space: */ +# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000) +/* Bus Interface registers: */ +# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000) +/* FPGA registers: */ +# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000) +/* SONIC SN83934 Ethernet controller/transceiver: */ +# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000) +/* 8-character bitmapped LED display: */ +# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000) +/* National-Semi PC16552D DUART: */ +# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */ +# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */ +/* Asynchronous Static RAM: */ +# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000) +/* 8-bit EEPROM: */ +# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000) +/* 2 x 16-bit EPROMs: */ +# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000) +#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */ + +/* These devices might be accessed cached: */ +#ifdef XSHAL_IOBLOCK_CACHED_PADDR +# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000) +# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000) +# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000) +# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000) +# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000) +#endif /* XSHAL_IOBLOCK_CACHED_PADDR */ + + +/*** Same thing over again, this time with virtual addresses: ***/ + +#ifdef XSHAL_IOBLOCK_BYPASS_VADDR +/* PCI memory space: */ +# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000) +/* Socketed Flash (eg. 2 x 16-bit devices): */ +# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000) +/* PCI I/O space: */ +# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000) +/* V3 PCI interface chip register/config space: */ +# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000) +/* Bus Interface registers: */ +# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000) +/* FPGA registers: */ +# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000) +/* SONIC SN83934 Ethernet controller/transceiver: */ +# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000) +/* 8-character bitmapped LED display: */ +# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000) +/* National-Semi PC16552D DUART: */ +# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */ +# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */ +/* Asynchronous Static RAM: */ +# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000) +/* 8-bit EEPROM: */ +# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000) +/* 2 x 16-bit EPROMs: */ +# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000) +#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */ + +/* These devices might be accessed cached: */ +#ifdef XSHAL_IOBLOCK_CACHED_VADDR +# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000) +# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000) +# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000) +# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000) +# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000) +#endif /* XSHAL_IOBLOCK_CACHED_VADDR */ + + +/* System ROM: */ +#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE +#ifdef XSHAL_ROM_VADDR +#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR +#endif +#ifdef XSHAL_ROM_PADDR +#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR +#endif + +/* System RAM: */ +#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE +#ifdef XSHAL_RAM_VADDR +#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR +#endif +#ifdef XSHAL_RAM_PADDR +#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR +#endif +#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR +#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR + + + +/* + * Things that depend on device addresses. + */ + + +#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK +#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC +#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU +#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS +#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT + +#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS +#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS + + + +/* + * BusLogic (FPGA) registers. + * All these registers are normally accessed using 32-bit loads/stores. + */ + +/* Register offsets: */ +#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */ +#define XT2000_STSREG_OFS 0x04 /* status (read-only) */ +#define XT2000_SYSLED_OFS 0x08 /* system LED */ +#define XT2000_WRPROT_OFS 0x0C /* write protect */ +#define XT2000_SWRST_OFS 0x10 /* software reset */ +#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */ +#define XT2000_IMASK_OFS 0x18 /* interrupt mask */ +#define XT2000_ISTAT_OFS 0x1C /* interrupt status */ +#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */ + +/* Physical register addresses: */ +#ifdef XT2000_FPGAREGS_PADDR +#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS) +#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS) +#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS) +#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS) +#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS) +#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS) +#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS) +#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS) +#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS) +#endif + +/* Virtual register addresses: */ +#ifdef XT2000_FPGAREGS_VADDR +#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS) +#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS) +#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS) +#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS) +#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS) +#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS) +#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS) +#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS) +#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS) +/* Register access (for C code): */ +#define XT2000_DATECD_REG (*(volatile unsigned*) XT2000_DATECD_VADDR) +#define XT2000_STSREG_REG (*(volatile unsigned*) XT2000_STSREG_VADDR) +#define XT2000_SYSLED_REG (*(volatile unsigned*) XT2000_SYSLED_VADDR) +#define XT2000_WRPROT_REG (*(volatile unsigned*) XT2000_WRPROT_VADDR) +#define XT2000_SWRST_REG (*(volatile unsigned*) XT2000_SWRST_VADDR) +#define XT2000_SYSRST_REG (*(volatile unsigned*) XT2000_SYSRST_VADDR) +#define XT2000_IMASK_REG (*(volatile unsigned*) XT2000_IMASK_VADDR) +#define XT2000_ISTAT_REG (*(volatile unsigned*) XT2000_ISTAT_VADDR) +#define XT2000_V3CFG_REG (*(volatile unsigned*) XT2000_V3CFG_VADDR) +#endif + +/* DATECD (date code) bit fields: */ + +/* BCD-coded month (01..12): */ +#define XT2000_DATECD_MONTH_SHIFT 24 +#define XT2000_DATECD_MONTH_BITS 8 +#define XT2000_DATECD_MONTH_MASK 0xFF000000 +/* BCD-coded day (01..31): */ +#define XT2000_DATECD_DAY_SHIFT 16 +#define XT2000_DATECD_DAY_BITS 8 +#define XT2000_DATECD_DAY_MASK 0x00FF0000 +/* BCD-coded year (2001..9999): */ +#define XT2000_DATECD_YEAR_SHIFT 0 +#define XT2000_DATECD_YEAR_BITS 16 +#define XT2000_DATECD_YEAR_MASK 0x0000FFFF + +/* STSREG (status) bit fields: */ + +/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */ +#define XT2000_STSREG_SW3_SHIFT 0 +#define XT2000_STSREG_SW3_BITS 4 +#define XT2000_STSREG_SW3_MASK 0x0000000F +/* Boot-select bits of switch SW3: */ +#define XT2000_STSREG_BOOTSEL_SHIFT 0 +#define XT2000_STSREG_BOOTSEL_BITS 2 +#define XT2000_STSREG_BOOTSEL_MASK 0x00000003 +/* Boot-select values: */ +#define XT2000_STSREG_BOOTSEL_FLASH 0 +#define XT2000_STSREG_BOOTSEL_EPROM16 1 +#define XT2000_STSREG_BOOTSEL_PROM8 2 +#define XT2000_STSREG_BOOTSEL_ASRAM 3 +/* User-defined bits of switch SW3: */ +#define XT2000_STSREG_SW3_2_SHIFT 2 +#define XT2000_STSREG_SW3_2_MASK 0x00000004 +#define XT2000_STSREG_SW3_3_SHIFT 3 +#define XT2000_STSREG_SW3_3_MASK 0x00000008 + +/* SYSLED (system LED) bit fields: */ + +/* LED control bit (0=off, 1=on): */ +#define XT2000_SYSLED_LEDON_SHIFT 0 +#define XT2000_SYSLED_LEDON_MASK 0x00000001 + +/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */ + +/* Flash write protect: */ +#define XT2000_WRPROT_FLWP_SHIFT 0 +#define XT2000_WRPROT_FLWP_MASK 0x00000001 +/* Reserved but present write protect bits: */ +#define XT2000_WRPROT_WRP_SHIFT 1 +#define XT2000_WRPROT_WRP_BITS 7 +#define XT2000_WRPROT_WRP_MASK 0x000000FE + +/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */ + +/* Software reset bits: */ +#define XT2000_SWRST_SWR_SHIFT 0 +#define XT2000_SWRST_SWR_BITS 16 +#define XT2000_SWRST_SWR_MASK 0x0000FFFF +/* Software reset value -- writing this value resets the board: */ +#define XT2000_SWRST_RESETVALUE 0x0000DEAD + +/* SYSRST (system reset; controls reset of individual peripherals): */ + +/* All-device reset: */ +#define XT2000_SYSRST_ALL_SHIFT 0 +#define XT2000_SYSRST_ALL_BITS 4 +#define XT2000_SYSRST_ALL_MASK 0x0000000F +/* HDSP-2534 LED display reset (1=reset, 0=nothing): */ +#define XT2000_SYSRST_LED_SHIFT 0 +#define XT2000_SYSRST_LED_MASK 0x00000001 +/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */ +#define XT2000_SYSRST_SONIC_SHIFT 1 +#define XT2000_SYSRST_SONIC_MASK 0x00000002 +/* DP16552 DUART reset (1=reset, 0=nothing): */ +#define XT2000_SYSRST_DUART_SHIFT 2 +#define XT2000_SYSRST_DUART_MASK 0x00000004 +/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */ +#define XT2000_SYSRST_V3_SHIFT 3 +#define XT2000_SYSRST_V3_MASK 0x00000008 + +/* IMASK (interrupt mask; 0=disable, 1=enable): */ +/* ISTAT (interrupt status; 0=inactive, 1=pending): */ + +/* PCI INTP interrupt: */ +#define XT2000_INTMUX_PCI_INTP_SHIFT 2 +#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004 +/* PCI INTS interrupt: */ +#define XT2000_INTMUX_PCI_INTS_SHIFT 3 +#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008 +/* PCI INTD interrupt: */ +#define XT2000_INTMUX_PCI_INTD_SHIFT 4 +#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010 +/* V320 PCI controller interrupt: */ +#define XT2000_INTMUX_V3_SHIFT 5 +#define XT2000_INTMUX_V3_MASK 0x00000020 +/* PCI ENUM interrupt: */ +#define XT2000_INTMUX_PCI_ENUM_SHIFT 6 +#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040 +/* PCI DEG interrupt: */ +#define XT2000_INTMUX_PCI_DEG_SHIFT 7 +#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080 + +/* V3CFG (V3 config, V320 PCI controller): */ + +/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */ +#define XT2000_V3CFG_V3ADC_SHIFT 0 +#define XT2000_V3CFG_V3ADC_MASK 0x00000001 + +/* I2C Devices */ + +#define XT2000_I2C_RTC_ID 0x68 +#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */ +#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */ + +/* NVRAM Board Info structure: */ + +#define XT2000_NVRAM_SIZE 512 + +#define XT2000_NVRAM_BINFO_START 0x100 +#define XT2000_NVRAM_BINFO_SIZE 0x20 +#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */ +#if 0 +#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00 +#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1 +#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02 +#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6 +#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10 +#define XT2000_NVRAM_BINFO_SN_SIZE 0xE +#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E +#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2 +#endif /*0*/ + +#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) +typedef struct xt2000_nvram_binfo { + unsigned char version; + unsigned char reserved1; + unsigned char eth_addr[6]; + unsigned char reserved8[8]; + unsigned char serialno[14]; + unsigned char crc[2]; /* 16-bit CRC */ +} xt2000_nvram_binfo; +#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/ + + +#endif /*_INC_XT2000_H_*/ + diff --git a/include/asm-xtensa/xtensa/xtboard.h b/include/asm-xtensa/xtensa/xtboard.h new file mode 100644 index 000000000000..22469c175307 --- /dev/null +++ b/include/asm-xtensa/xtensa/xtboard.h @@ -0,0 +1,120 @@ +#ifndef _xtboard_h_included_ +#define _xtboard_h_included_ + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * xtboard.h -- Routines for getting useful information from the board. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include + +#define XTBOARD_RTC_ERROR -1 +#define XTBOARD_RTC_STOPPED -2 + + +/* xt2000-i2cdev.c: */ +typedef void XtboardDelayFunc( unsigned ); +extern XtboardDelayFunc* xtboard_set_nsdelay_func( XtboardDelayFunc *delay_fn ); +extern int xtboard_i2c_read (unsigned id, unsigned char *buf, unsigned addr, unsigned size); +extern int xtboard_i2c_write(unsigned id, unsigned char *buf, unsigned addr, unsigned size); +extern int xtboard_i2c_wait_nvram_ack(unsigned id, unsigned swtimer); + +/* xtboard.c: */ +extern int xtboard_nvram_read (unsigned addr, unsigned len, unsigned char *buf); +extern int xtboard_nvram_write(unsigned addr, unsigned len, unsigned char *buf); +extern int xtboard_nvram_binfo_read (xt2000_nvram_binfo *buf); +extern int xtboard_nvram_binfo_write(xt2000_nvram_binfo *buf); +extern int xtboard_nvram_binfo_valid(xt2000_nvram_binfo *buf); +extern int xtboard_ethermac_get(unsigned char *buf); +extern int xtboard_ethermac_set(unsigned char *buf); + +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_get_rtc_time +/ +/ Description: Get time stored in real-time clock. +/ +/ Returns: time in seconds stored in real-time clock. +/-**----------------------------------------------------------------------------*/ + +extern unsigned xtboard_get_rtc_time(void); + +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_set_rtc_time +/ +/ Description: Set time stored in real-time clock. +/ +/ Parameters: time -- time in seconds to store to real-time clock +/ +/ Returns: 0 on success, xtboard_i2c_write() error code otherwise. +/-**----------------------------------------------------------------------------*/ + +extern int xtboard_set_rtc_time(unsigned time); + + +/* xtfreq.c: */ +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_measure_sys_clk +/ +/ Description: Get frequency of system clock. +/ +/ Parameters: none +/ +/ Returns: frequency of system clock. +/-**----------------------------------------------------------------------------*/ + +extern unsigned xtboard_measure_sys_clk(void); + + +#if 0 /* old stuff from xtboard.c: */ + +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_nvram valid +/ +/ Description: Determines if data in NVRAM is valid. +/ +/ Parameters: delay -- 10us delay function +/ +/ Returns: 1 if NVRAM is valid, 0 otherwise +/-**----------------------------------------------------------------------------*/ + +extern unsigned xtboard_nvram_valid(void (*delay)( void )); + +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_get_nvram_contents +/ +/ Description: Returns contents of NVRAM. +/ +/ Parameters: buf -- buffer to NVRAM contents. +/ delay -- 10us delay function +/ +/ Returns: 1 if NVRAM is valid, 0 otherwise +/-**----------------------------------------------------------------------------*/ + +extern unsigned xtboard_get_nvram_contents(unsigned char *buf, void (*delay)( void )); + +/*+*---------------------------------------------------------------------------- +/ Function: xtboard_get_ether_addr +/ +/ Description: Returns ethernet address of board. +/ +/ Parameters: buf -- buffer to store ethernet address +/ delay -- 10us delay function +/ +/ Returns: nothing. +/-**----------------------------------------------------------------------------*/ + +extern void xtboard_get_ether_addr(unsigned char *buf, void (*delay)( void )); + +#endif /*0*/ + + +#endif /*_xtboard_h_included_*/ +