From: Mike Dunn Date: Wed, 25 Apr 2012 19:06:10 +0000 (-0700) Subject: mtd: nand: add sanity check of ecc strength to nand_scan_tail() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e2788c98b98269a3131bffd2b57599280d7abd73;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git mtd: nand: add sanity check of ecc strength to nand_scan_tail() This patch adds sanity checks that ensure that drivers for controllers with hardware ECC set the 'strength' element in struct nand_ecc_ctrl. Also stylistic changes to the line that calculates strength for software ECC. This v2 simplifies the check. Thanks Brian!¹ ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040890.html Signed-off-by: Mike Dunn Acked-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8718eaf8269f..9f5d339a3610 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3348,8 +3348,13 @@ int nand_scan_tail(struct mtd_info *mtd) if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_syndrome; - if (mtd->writesize >= chip->ecc.size) + if (mtd->writesize >= chip->ecc.size) { + if (!chip->ecc.strength) { + pr_warn("Driver must set ecc.strength when using hardware ECC\n"); + BUG(); + } break; + } pr_warn("%d byte HW ECC not possible on " "%d byte page size, fallback to SW ECC\n", chip->ecc.size, mtd->writesize); @@ -3404,7 +3409,7 @@ int nand_scan_tail(struct mtd_info *mtd) BUG(); } chip->ecc.strength = - chip->ecc.bytes*8 / fls(8*chip->ecc.size); + chip->ecc.bytes * 8 / fls(8 * chip->ecc.size); break; case NAND_ECC_NONE: