From: Michael Ellerman Date: Fri, 23 May 2014 08:15:30 +0000 (+1000) Subject: powerpc/powernv: Add support for POWER8 split core on powernv X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e2186023f2d81ee7bb42d2a7dec3d889df7cdace;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/powernv: Add support for POWER8 split core on powernv Upcoming POWER8 chips support a concept called split core. This is where the core can be split into subcores that although not full cores, are able to appear as full cores to a guest. The splitting & unsplitting procedure is mildly complicated, and explained at length in the comments within the patch. One notable detail is that when splitting or unsplitting we need to pull offline cpus out of their offline state to do work as part of the procedure. The interface for changing the split mode is via a sysfs file, eg: $ echo 2 > /sys/devices/system/cpu/subcores_per_core Currently supported values are '1', '2' and '4'. And indicate respectively that the core should be unsplit, split in half, and split in quarters. These modes correspond to threads_per_subcore of 8, 4 and 2. We do not allow changing the split mode while KVM VMs are active. This is to prevent the value changing while userspace is configuring the VM, and also to prevent the mode being changed in such a way that existing guests are unable to be run. CPU hotplug fixes by Srivatsa. max_cpus fixes by Mahesh. cpuset fixes by benh. Fix for irq race by paulus. The rest by mikey and mpe. Signed-off-by: Michael Ellerman Signed-off-by: Michael Neuling Signed-off-by: Srivatsa S. Bhat Signed-off-by: Mahesh Salgaonkar Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 29de0152878f..2cd799b382ec 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -225,6 +225,7 @@ #define CTRL_TE 0x00c00000 /* thread enable */ #define CTRL_RUNLATCH 0x1 #define SPRN_DAWR 0xB4 +#define SPRN_RPR 0xBA /* Relative Priority Register */ #define SPRN_CIABR 0xBB #define CIABR_PRIV 0x3 #define CIABR_PRIV_USER 1 @@ -273,8 +274,10 @@ #define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ #define SPRN_IC 0x350 /* Virtual Instruction Count */ #define SPRN_VTB 0x351 /* Virtual Time Base */ +#define SPRN_LDBAR 0x352 /* LD Base Address Register */ #define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */ #define SPRN_PMSR 0x355 /* Power Management Status Reg */ +#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */ #define SPRN_PMCR 0x374 /* Power Management Control Register */ /* HFSCR and FSCR bit numbers are the same */ @@ -434,6 +437,12 @@ #define HID0_BTCD (1<<1) /* Branch target cache disable */ #define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ #define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ +/* POWER8 HID0 bits */ +#define HID0_POWER8_4LPARMODE __MASK(61) +#define HID0_POWER8_2LPARMODE __MASK(57) +#define HID0_POWER8_1TO2LPAR __MASK(52) +#define HID0_POWER8_1TO4LPAR __MASK(51) +#define HID0_POWER8_DYNLPARDIS __MASK(48) #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ #ifdef CONFIG_6xx diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 63cebb9b4d45..4ad0d345bc96 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,7 +1,7 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o -obj-y += opal-msglog.o +obj-y += opal-msglog.o subcore.o subcore-asm.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 0051e108ef0f..75501bfede7f 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -25,4 +25,6 @@ static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) extern void pnv_lpc_init(void); +bool cpu_core_split_required(void); + #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 65faf998fe2c..0062a43a2e0d 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -161,15 +161,17 @@ static void pnv_smp_cpu_kill_self(void) ppc64_runlatch_off(); power7_nap(1); ppc64_runlatch_on(); - if (!generic_check_cpu_restart(cpu)) { + + /* Reenable IRQs briefly to clear the IPI that woke us */ + local_irq_enable(); + local_irq_disable(); + mb(); + + if (cpu_core_split_required()) + continue; + + if (!generic_check_cpu_restart(cpu)) DBG("CPU%d Unexpected exit while offline !\n", cpu); - /* We may be getting an IPI, so we re-enable - * interrupts to process it, it will be ignored - * since we aren't online (hopefully) - */ - local_irq_enable(); - local_irq_disable(); - } } mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); DBG("CPU%d coming online...\n", cpu); diff --git a/arch/powerpc/platforms/powernv/subcore-asm.S b/arch/powerpc/platforms/powernv/subcore-asm.S new file mode 100644 index 000000000000..39bb24aa8f34 --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore-asm.S @@ -0,0 +1,95 @@ +/* + * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include "subcore.h" + + +_GLOBAL(split_core_secondary_loop) + /* + * r3 = u8 *state, used throughout the routine + * r4 = temp + * r5 = temp + * .. + * r12 = MSR + */ + mfmsr r12 + + /* Disable interrupts so SRR0/1 don't get trashed */ + li r4,0 + ori r4,r4,MSR_EE|MSR_SE|MSR_BE|MSR_RI + andc r4,r12,r4 + sync + mtmsrd r4 + + /* Switch to real mode and leave interrupts off */ + li r5, MSR_IR|MSR_DR + andc r5, r4, r5 + + LOAD_REG_ADDR(r4, real_mode) + + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r5 + rfid + b . /* prevent speculative execution */ + +real_mode: + /* Grab values from unsplit SPRs */ + mfspr r6, SPRN_LDBAR + mfspr r7, SPRN_PMMAR + mfspr r8, SPRN_PMCR + mfspr r9, SPRN_RPR + mfspr r10, SPRN_SDR1 + + /* Order reading the SPRs vs telling the primary we are ready to split */ + sync + + /* Tell thread 0 we are in real mode */ + li r4, SYNC_STEP_REAL_MODE + stb r4, 0(r3) + + li r5, (HID0_POWER8_4LPARMODE | HID0_POWER8_2LPARMODE)@highest + sldi r5, r5, 48 + + /* Loop until we see the split happen in HID0 */ +1: mfspr r4, SPRN_HID0 + and. r4, r4, r5 + beq 1b + + /* + * We only need to initialise the below regs once for each subcore, + * but it's simpler and harmless to do it on each thread. + */ + + /* Make sure various SPRS have sane values */ + li r4, 0 + mtspr SPRN_LPID, r4 + mtspr SPRN_PCR, r4 + mtspr SPRN_HDEC, r4 + + /* Restore SPR values now we are split */ + mtspr SPRN_LDBAR, r6 + mtspr SPRN_PMMAR, r7 + mtspr SPRN_PMCR, r8 + mtspr SPRN_RPR, r9 + mtspr SPRN_SDR1, r10 + + LOAD_REG_ADDR(r5, virtual_mode) + + /* Get out of real mode */ + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r12 + rfid + b . /* prevent speculative execution */ + +virtual_mode: + blr diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c new file mode 100644 index 000000000000..894ecb3eb596 --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore.c @@ -0,0 +1,392 @@ +/* + * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) "powernv: " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "subcore.h" + + +/* + * Split/unsplit procedure: + * + * A core can be in one of three states, unsplit, 2-way split, and 4-way split. + * + * The mapping to subcores_per_core is simple: + * + * State | subcores_per_core + * ------------|------------------ + * Unsplit | 1 + * 2-way split | 2 + * 4-way split | 4 + * + * The core is split along thread boundaries, the mapping between subcores and + * threads is as follows: + * + * Unsplit: + * ---------------------------- + * Subcore | 0 | + * ---------------------------- + * Thread | 0 1 2 3 4 5 6 7 | + * ---------------------------- + * + * 2-way split: + * ------------------------------------- + * Subcore | 0 | 1 | + * ------------------------------------- + * Thread | 0 1 2 3 | 4 5 6 7 | + * ------------------------------------- + * + * 4-way split: + * ----------------------------------------- + * Subcore | 0 | 1 | 2 | 3 | + * ----------------------------------------- + * Thread | 0 1 | 2 3 | 4 5 | 6 7 | + * ----------------------------------------- + * + * + * Transitions + * ----------- + * + * It is not possible to transition between either of the split states, the + * core must first be unsplit. The legal transitions are: + * + * ----------- --------------- + * | | <----> | 2-way split | + * | | --------------- + * | Unsplit | + * | | --------------- + * | | <----> | 4-way split | + * ----------- --------------- + * + * Unsplitting + * ----------- + * + * Unsplitting is the simpler procedure. It requires thread 0 to request the + * unsplit while all other threads NAP. + * + * Thread 0 clears HID0_POWER8_DYNLPARDIS (Dynamic LPAR Disable). This tells + * the hardware that if all threads except 0 are napping, the hardware should + * unsplit the core. + * + * Non-zero threads are sent to a NAP loop, they don't exit the loop until they + * see the core unsplit. + * + * Core 0 spins waiting for the hardware to see all the other threads napping + * and perform the unsplit. + * + * Once thread 0 sees the unsplit, it IPIs the secondary threads to wake them + * out of NAP. They will then see the core unsplit and exit the NAP loop. + * + * Splitting + * --------- + * + * The basic splitting procedure is fairly straight forward. However it is + * complicated by the fact that after the split occurs, the newly created + * subcores are not in a fully initialised state. + * + * Most notably the subcores do not have the correct value for SDR1, which + * means they must not be running in virtual mode when the split occurs. The + * subcores have separate timebases SPRs but these are pre-synchronised by + * opal. + * + * To begin with secondary threads are sent to an assembly routine. There they + * switch to real mode, so they are immune to the uninitialised SDR1 value. + * Once in real mode they indicate that they are in real mode, and spin waiting + * to see the core split. + * + * Thread 0 waits to see that all secondaries are in real mode, and then begins + * the splitting procedure. It firstly sets HID0_POWER8_DYNLPARDIS, which + * prevents the hardware from unsplitting. Then it sets the appropriate HID bit + * to request the split, and spins waiting to see that the split has happened. + * + * Concurrently the secondaries will notice the split. When they do they set up + * their SPRs, notably SDR1, and then they can return to virtual mode and exit + * the procedure. + */ + +/* Initialised at boot by subcore_init() */ +static int subcores_per_core; + +/* + * Used to communicate to offline cpus that we want them to pop out of the + * offline loop and do a split or unsplit. + * + * 0 - no split happening + * 1 - unsplit in progress + * 2 - split to 2 in progress + * 4 - split to 4 in progress + */ +static int new_split_mode; + +static cpumask_var_t cpu_offline_mask; + +struct split_state { + u8 step; + u8 master; +}; + +static DEFINE_PER_CPU(struct split_state, split_state); + +static void wait_for_sync_step(int step) +{ + int i, cpu = smp_processor_id(); + + for (i = cpu + 1; i < cpu + threads_per_core; i++) + while(per_cpu(split_state, i).step < step) + barrier(); + + /* Order the wait loop vs any subsequent loads/stores. */ + mb(); +} + +static void unsplit_core(void) +{ + u64 hid0, mask; + int i, cpu; + + mask = HID0_POWER8_2LPARMODE | HID0_POWER8_4LPARMODE; + + cpu = smp_processor_id(); + if (cpu_thread_in_core(cpu) != 0) { + while (mfspr(SPRN_HID0) & mask) + power7_nap(0); + + per_cpu(split_state, cpu).step = SYNC_STEP_UNSPLIT; + return; + } + + hid0 = mfspr(SPRN_HID0); + hid0 &= ~HID0_POWER8_DYNLPARDIS; + mtspr(SPRN_HID0, hid0); + + while (mfspr(SPRN_HID0) & mask) + cpu_relax(); + + /* Wake secondaries out of NAP */ + for (i = cpu + 1; i < cpu + threads_per_core; i++) + smp_send_reschedule(i); + + wait_for_sync_step(SYNC_STEP_UNSPLIT); +} + +static void split_core(int new_mode) +{ + struct { u64 value; u64 mask; } split_parms[2] = { + { HID0_POWER8_1TO2LPAR, HID0_POWER8_2LPARMODE }, + { HID0_POWER8_1TO4LPAR, HID0_POWER8_4LPARMODE } + }; + int i, cpu; + u64 hid0; + + /* Convert new_mode (2 or 4) into an index into our parms array */ + i = (new_mode >> 1) - 1; + BUG_ON(i < 0 || i > 1); + + cpu = smp_processor_id(); + if (cpu_thread_in_core(cpu) != 0) { + split_core_secondary_loop(&per_cpu(split_state, cpu).step); + return; + } + + wait_for_sync_step(SYNC_STEP_REAL_MODE); + + /* Write new mode */ + hid0 = mfspr(SPRN_HID0); + hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value; + mtspr(SPRN_HID0, hid0); + + /* Wait for it to happen */ + while (!(mfspr(SPRN_HID0) & split_parms[i].mask)) + cpu_relax(); +} + +static void cpu_do_split(int new_mode) +{ + /* + * At boot subcores_per_core will be 0, so we will always unsplit at + * boot. In the usual case where the core is already unsplit it's a + * nop, and this just ensures the kernel's notion of the mode is + * consistent with the hardware. + */ + if (subcores_per_core != 1) + unsplit_core(); + + if (new_mode != 1) + split_core(new_mode); + + mb(); + per_cpu(split_state, smp_processor_id()).step = SYNC_STEP_FINISHED; +} + +bool cpu_core_split_required(void) +{ + smp_rmb(); + + if (!new_split_mode) + return false; + + cpu_do_split(new_split_mode); + + return true; +} + +static int cpu_update_split_mode(void *data) +{ + int cpu, new_mode = *(int *)data; + + if (this_cpu_ptr(&split_state)->master) { + new_split_mode = new_mode; + smp_wmb(); + + cpumask_andnot(cpu_offline_mask, cpu_present_mask, + cpu_online_mask); + + /* This should work even though the cpu is offline */ + for_each_cpu(cpu, cpu_offline_mask) + smp_send_reschedule(cpu); + } + + cpu_do_split(new_mode); + + if (this_cpu_ptr(&split_state)->master) { + /* Wait for all cpus to finish before we touch subcores_per_core */ + for_each_present_cpu(cpu) { + if (cpu >= setup_max_cpus) + break; + + while(per_cpu(split_state, cpu).step < SYNC_STEP_FINISHED) + barrier(); + } + + new_split_mode = 0; + + /* Make the new mode public */ + subcores_per_core = new_mode; + threads_per_subcore = threads_per_core / subcores_per_core; + + /* Make sure the new mode is written before we exit */ + mb(); + } + + return 0; +} + +static int set_subcores_per_core(int new_mode) +{ + struct split_state *state; + int cpu; + + if (kvm_hv_mode_active()) { + pr_err("Unable to change split core mode while KVM active.\n"); + return -EBUSY; + } + + /* + * We are only called at boot, or from the sysfs write. If that ever + * changes we'll need a lock here. + */ + BUG_ON(new_mode < 1 || new_mode > 4 || new_mode == 3); + + for_each_present_cpu(cpu) { + state = &per_cpu(split_state, cpu); + state->step = SYNC_STEP_INITIAL; + state->master = 0; + } + + get_online_cpus(); + + /* This cpu will update the globals before exiting stop machine */ + this_cpu_ptr(&split_state)->master = 1; + + /* Ensure state is consistent before we call the other cpus */ + mb(); + + stop_machine(cpu_update_split_mode, &new_mode, cpu_online_mask); + + put_online_cpus(); + + return 0; +} + +static ssize_t __used store_subcores_per_core(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + unsigned long val; + int rc; + + /* We are serialised by the attribute lock */ + + rc = sscanf(buf, "%lx", &val); + if (rc != 1) + return -EINVAL; + + switch (val) { + case 1: + case 2: + case 4: + if (subcores_per_core == val) + /* Nothing to do */ + goto out; + break; + default: + return -EINVAL; + } + + rc = set_subcores_per_core(val); + if (rc) + return rc; + +out: + return count; +} + +static ssize_t show_subcores_per_core(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%x\n", subcores_per_core); +} + +static DEVICE_ATTR(subcores_per_core, 0644, + show_subcores_per_core, store_subcores_per_core); + +static int subcore_init(void) +{ + if (!cpu_has_feature(CPU_FTR_ARCH_207S)) + return 0; + + /* + * We need all threads in a core to be present to split/unsplit so + * continue only if max_cpus are aligned to threads_per_core. + */ + if (setup_max_cpus % threads_per_core) + return 0; + + BUG_ON(!alloc_cpumask_var(&cpu_offline_mask, GFP_KERNEL)); + + set_subcores_per_core(1); + + return device_create_file(cpu_subsys.dev_root, + &dev_attr_subcores_per_core); +} +machine_device_initcall(powernv, subcore_init); diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h new file mode 100644 index 000000000000..148abc91debf --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore.h @@ -0,0 +1,18 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* These are ordered and tested with <= */ +#define SYNC_STEP_INITIAL 0 +#define SYNC_STEP_UNSPLIT 1 /* Set by secondary when it sees unsplit */ +#define SYNC_STEP_REAL_MODE 2 /* Set by secondary when in real mode */ +#define SYNC_STEP_FINISHED 3 /* Set by secondary when split/unsplit is done */ + +#ifndef __ASSEMBLY__ +void split_core_secondary_loop(u8 *state); +#endif