From: Sjoerd Simons Date: Thu, 25 Sep 2014 08:32:14 +0000 (+0900) Subject: ARM: dts: Explicitly set dr_mode on exynos Peach boards X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e1c69efc52bbad7fa289694672d467ab4fdf9f52;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git ARM: dts: Explicitly set dr_mode on exynos Peach boards In case the optional dr_mode property isn't set in the dwc3 nodes the the controller will go into OTG mode if both USB host and USB gadget functionality are enabled in the kernel configuration. Unfortunately this results in USB not working on exynos5420-peach-pit and exynos5800-peach-pi with such a kernel configuration unless manually change the mode. To resolve that explicitly configure the dual role mode as host. Signed-off-by: Sjoerd Simons Reviewed-by: Andreas Faerber Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 228a6b1e0aa1..29d3a5994df4 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -427,6 +427,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index bfe056d9148c..8617a031cbc0 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -815,7 +815,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_0: dwc3 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -841,7 +841,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_1: dwc3 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f3ee48bbe05f..20645502fecb 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -425,6 +425,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; };