From: Stephen Hemminger Date: Tue, 17 Jun 2008 16:04:24 +0000 (-0700) Subject: sky2: phy setup changes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e1a74b375ca084add9164ae30ca0fdb9fe691ec9;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git sky2: phy setup changes Change the setup of the PHY registers on some chip ids. These changes make the latest sky2 driver follow the vendor driver. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7f1cfc48e1b2..af7ea887118a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -658,8 +658,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); } - if (hw->chip_id == CHIP_ID_YUKON_EC_U && - hw->chip_rev == CHIP_REV_YU_EC_U_A1) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U) { /* apply fixes in PHY AFE */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); @@ -678,7 +677,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* apply workaround for integrated resistors calibration */ gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); - } else if (hw->chip_id != CHIP_ID_YUKON_EX) { + } else if (hw->chip_id != CHIP_ID_YUKON_EX && + hw->chip_id < CHIP_ID_YUKON_SUPR) { /* no effect on Yukon-XL */ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);