From: Joe Perches Date: Thu, 28 Jan 2010 20:59:27 +0000 (+0000) Subject: tulip/uli526x.c: Use dev_ and pr_ X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e02fb7aa0714ca9357571bb15ef0fe278a150cc7;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git tulip/uli526x.c: Use dev_ and pr_ Convert printks to dev_ where a dev is available Convert printks to pr_ where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from logging messages Add do {} while(0) to ULI526X_DBUG macro Make SHOW_MEDIA_TYPE macro more readable Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index d549042a01df..dc3335d906f6 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -12,6 +12,8 @@ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "uli526x" #define DRV_VERSION "0.9.3" #define DRV_RELDATE "2005-7-29" @@ -82,9 +84,16 @@ #define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ #define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ -#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) +#define ULI526X_DBUG(dbug_now, msg, value) \ +do { \ + if (uli526x_debug || (dbug_now)) \ + pr_err("%s %lx\n", (msg), (long) (value)); \ +} while (0) -#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); +#define SHOW_MEDIA_TYPE(mode) \ + pr_err("Change Speed to %sMhz %s duplex\n", \ + mode & 1 ? "100" : "10", \ + mode & 4 ? "full" : "half"); /* CR9 definition: SROM/MII */ @@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + pr_warning("32-bit PCI DMA not available\n"); err = -ENODEV; goto err_out_free; } @@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, goto err_out_free; if (!pci_resource_start(pdev, 0)) { - printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + pr_err("I/O base is zero\n"); err = -ENODEV; goto err_out_disable; } if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { - printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + pr_err("Allocated I/O size too small\n"); err = -ENODEV; goto err_out_disable; } if (pci_request_regions(pdev, DRV_NAME)) { - printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + pr_err("Failed to request PCI regions\n"); err = -ENODEV; goto err_out_disable; } @@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, if (err) goto err_out_res; - printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n", - dev->name,ent->driver_data >> 16,pci_name(pdev), - dev->dev_addr, dev->irq); + dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n", + ent->driver_data >> 16, pci_name(pdev), + dev->dev_addr, dev->irq); pci_set_master(pdev); @@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev) } } if(phy_tmp == 32) - printk(KERN_WARNING "Can not find the phy address!!!"); + pr_warning("Can not find the phy address!!!"); /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; @@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, /* Too large packet check */ if (skb->len > MAX_PACKET_SIZE) { - printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + pr_err("big packet = %d\n", (u16)skb->len); dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, /* No Tx resource check, it never happen nromally */ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { spin_unlock_irqrestore(&db->lock, flags); - printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt); + pr_err("No Tx resource %ld\n", db->tx_packet_cnt); return NETDEV_TX_BUSY; } @@ -1058,7 +1067,7 @@ static void uli526x_timer(unsigned long data) /* Link Failed */ ULI526X_DBUG(0, "Link Failed", tmp_cr12); netif_carrier_off(dev); - printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + pr_info("%s NIC Link is Down\n",dev->name); db->link_failed = 1; /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ @@ -1090,11 +1099,11 @@ static void uli526x_timer(unsigned long data) } if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) { - printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); + pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); } else { - printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); + pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); } netif_carrier_on(dev); } @@ -1104,7 +1113,7 @@ static void uli526x_timer(unsigned long data) { if(db->init==1) { - printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + pr_info("%s NIC Link is Down\n",dev->name); netif_carrier_off(dev); } } @@ -1230,8 +1239,7 @@ static int uli526x_resume(struct pci_dev *pdev) err = pci_set_power_state(pdev, PCI_D0); if (err) { - printk(KERN_WARNING "%s: Could not put device into D0\n", - dev->name); + dev_warn(&dev->dev, "Could not put device into D0\n"); return err; } @@ -1432,7 +1440,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt) update_cr6(db->cr6_data, dev->base_addr); dev->trans_start = jiffies; } else - printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n"); + pr_err("No Tx resource - Send_filter_frame!\n"); }