From: Vahram Aharonyan Date: Tue, 15 Nov 2016 03:16:24 +0000 (-0800) Subject: usb: dwc2: gadget: EP 0 specific DDMA programming X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=e02f9aa6119e0a5a32b4d08e2c26f6b1381dc8a2;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git usb: dwc2: gadget: EP 0 specific DDMA programming Add dwc2_gadget_set_ep0_desc_chain() function to switch between EP0 DDMA chains depend on the stage of control transfer. Include EP0 DDMA chain selection during ep_queue called from dwc2_hsotg_enqueue_setup() for setup stage. Selecting and filling DDMA chain for status phase as well - add calls of dwc2_gadget_set_ep0_desc_chain() and dwc2_gadget_config_nonisoc_xfer_ddma() functions. Signed-off-by: Vahram Aharonyan Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 3264375231f4..caa428a4a3eb 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -627,6 +627,114 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep) return maxsize; } +/* + * dwc2_gadget_get_desc_params - get DMA descriptor parameters. + * @hs_ep: The endpoint + * @mask: RX/TX bytes mask to be defined + * + * Returns maximum data payload for one descriptor after analyzing endpoint + * characteristics. + * DMA descriptor transfer bytes limit depends on EP type: + * Control out - MPS, + * Isochronous - descriptor rx/tx bytes bitfield limit, + * Control In/Bulk/Interrupt - multiple of mps. This will allow to not + * have concatenations from various descriptors within one packet. + * + * Selects corresponding mask for RX/TX bytes as well. + */ +static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask) +{ + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; + u32 desc_size = 0; + + if (!hs_ep->index && !dir_in) { + desc_size = mps; + *mask = DEV_DMA_NBYTES_MASK; + } else if (hs_ep->isochronous) { + if (dir_in) { + desc_size = DEV_DMA_ISOC_TX_NBYTES_LIMIT; + *mask = DEV_DMA_ISOC_TX_NBYTES_MASK; + } else { + desc_size = DEV_DMA_ISOC_RX_NBYTES_LIMIT; + *mask = DEV_DMA_ISOC_RX_NBYTES_MASK; + } + } else { + desc_size = DEV_DMA_NBYTES_LIMIT; + *mask = DEV_DMA_NBYTES_MASK; + + /* Round down desc_size to be mps multiple */ + desc_size -= desc_size % mps; + } + + return desc_size; +} + +/* + * dwc2_gadget_config_nonisoc_xfer_ddma - prepare non ISOC DMA desc chain. + * @hs_ep: The endpoint + * @dma_buff: DMA address to use + * @len: Length of the transfer + * + * This function will iterate over descriptor chain and fill its entries + * with corresponding information based on transfer data. + */ +static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, + dma_addr_t dma_buff, + unsigned int len) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + int dir_in = hs_ep->dir_in; + struct dwc2_dma_desc *desc = hs_ep->desc_list; + u32 mps = hs_ep->ep.maxpacket; + u32 maxsize = 0; + u32 offset = 0; + u32 mask = 0; + int i; + + maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); + + hs_ep->desc_count = (len / maxsize) + + ((len % maxsize) ? 1 : 0); + if (len == 0) + hs_ep->desc_count = 1; + + for (i = 0; i < hs_ep->desc_count; ++i) { + desc->status = 0; + desc->status |= (DEV_DMA_BUFF_STS_HBUSY + << DEV_DMA_BUFF_STS_SHIFT); + + if (len > maxsize) { + if (!hs_ep->index && !dir_in) + desc->status |= (DEV_DMA_L | DEV_DMA_IOC); + + desc->status |= (maxsize << + DEV_DMA_NBYTES_SHIFT & mask); + desc->buf = dma_buff + offset; + + len -= maxsize; + offset += maxsize; + } else { + desc->status |= (DEV_DMA_L | DEV_DMA_IOC); + + if (dir_in) + desc->status |= (len % mps) ? DEV_DMA_SHORT : + ((hs_ep->send_zlp) ? DEV_DMA_SHORT : 0); + if (len > maxsize) + dev_err(hsotg->dev, "wrong len %d\n", len); + + desc->status |= + len << DEV_DMA_NBYTES_SHIFT & mask; + desc->buf = dma_buff + offset; + } + + desc->status &= ~DEV_DMA_BUFF_STS_MASK; + desc->status |= (DEV_DMA_BUFF_STS_HREADY + << DEV_DMA_BUFF_STS_SHIFT); + desc++; + } +} + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -926,6 +1034,41 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) return false; } +/* + * dwc2_gadget_set_ep0_desc_chain - Set EP's desc chain pointers + * @hsotg: The driver state + * @hs_ep: the ep descriptor chain is for + * + * Called to update EP0 structure's pointers depend on stage of + * control transfer. + */ +static int dwc2_gadget_set_ep0_desc_chain(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + switch (hsotg->ep0_state) { + case DWC2_EP0_SETUP: + case DWC2_EP0_STATUS_OUT: + hs_ep->desc_list = hsotg->setup_desc[0]; + hs_ep->desc_list_dma = hsotg->setup_desc_dma[0]; + break; + case DWC2_EP0_DATA_IN: + case DWC2_EP0_STATUS_IN: + hs_ep->desc_list = hsotg->ctrl_in_desc; + hs_ep->desc_list_dma = hsotg->ctrl_in_desc_dma; + break; + case DWC2_EP0_DATA_OUT: + hs_ep->desc_list = hsotg->ctrl_out_desc; + hs_ep->desc_list_dma = hsotg->ctrl_out_desc_dma; + break; + default: + dev_err(hsotg->dev, "invalid EP 0 state in queue %d\n", + hsotg->ep0_state); + return -EINVAL; + } + + return 0; +} + static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { @@ -961,6 +1104,12 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, if (ret) return ret; } + /* If using descriptor DMA configure EP0 descriptor chain pointers */ + if (using_desc_dma(hs) && !hs_ep->index) { + ret = dwc2_gadget_set_ep0_desc_chain(hs, hs_ep); + if (ret) + return ret; + } first = list_empty(&hs_ep->queue); list_add_tail(&hs_req->queue, &hs_ep->queue); @@ -1529,14 +1678,21 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg, if (hs_ep->dir_in) dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n", - index); + index); else dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n", - index); + index); + if (using_desc_dma(hsotg)) { + /* Not specific buffer needed for ep0 ZLP */ + dma_addr_t dma = hs_ep->desc_list_dma; - dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | - DXEPTSIZ_XFERSIZE(0), hsotg->regs + - epsiz_reg); + dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep); + dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0); + } else { + dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), hsotg->regs + + epsiz_reg); + } ctrl = dwc2_readl(hsotg->regs + epctl_reg); ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */