From: Ryder Lee Date: Fri, 4 Aug 2017 03:59:35 +0000 (+0800) Subject: arm: dts: mt7623: cleanup binding file X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=dfff569aaf8886dcc97b145a15f2213b4a4599e6;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git arm: dts: mt7623: cleanup binding file Dummy patch to sort nodes alphabetically and add some blank lines for consistency. Signed-off-by: Ryder Lee Signed-off-by: Matthias Brugger --- diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 2a877ed8ff23..ec8a07415cb3 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -91,6 +91,7 @@ cooling-max-level = <7>; clock-frequency = <1300000000>; }; + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -98,6 +99,7 @@ operating-points-v2 = <&cpu_opp_table>; clock-frequency = <1300000000>; }; + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -105,6 +107,7 @@ operating-points-v2 = <&cpu_opp_table>; clock-frequency = <1300000000>; }; + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -172,10 +175,12 @@ trip = <&cpu_passive>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + map1 { trip = <&cpu_active>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + map2 { trip = <&cpu_hot>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; @@ -481,6 +486,31 @@ nvmem-cell-names = "calibration-data"; }; + nandc: nfi@1100d000 { + compatible = "mediatek,mt7623-nfc", + "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7623-ecc", + "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt7623-spi", "mediatek,mt2701-spi"; @@ -509,31 +539,6 @@ status = "disabled"; }; - nandc: nfi@1100d000 { - compatible = "mediatek,mt7623-nfc", - "mediatek,mt2701-nfc"; - reg = <0 0x1100d000 0 0x1000>; - interrupts = ; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - clocks = <&pericfg CLK_PERI_NFI>, - <&pericfg CLK_PERI_NFI_PAD>; - clock-names = "nfi_clk", "pad_clk"; - status = "disabled"; - ecc-engine = <&bch>; - #address-cells = <1>; - #size-cells = <0>; - }; - - bch: ecc@1100e000 { - compatible = "mediatek,mt7623-ecc", - "mediatek,mt2701-ecc"; - reg = <0 0x1100e000 0 0x1000>; - interrupts = ; - clocks = <&pericfg CLK_PERI_NFI_ECC>; - clock-names = "nfiecc_clk"; - status = "disabled"; - }; - afe: audio-controller@11220000 { compatible = "mediatek,mt7623-audio", "mediatek,mt2701-audio"; @@ -655,6 +660,15 @@ status = "disabled"; }; + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + usb1: usb@1a1c0000 { compatible = "mediatek,mt7623-xhci", "mediatek,mt8173-xhci"; @@ -733,15 +747,6 @@ }; }; - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - ethsys: syscon@1b000000 { compatible = "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 444ed9318ed9..688a86378cee 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -62,9 +62,9 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_a>; - red { - label = "bpi-r2:pio:red"; - gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + blue { + label = "bpi-r2:pio:blue"; + gpios = <&pio 241 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -74,9 +74,9 @@ default-state = "off"; }; - blue { - label = "bpi-r2:pio:blue"; - gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + red { + label = "bpi-r2:pio:red"; + gpios = <&pio 239 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -98,10 +98,12 @@ ð { status = "okay"; + gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; phy-mode = "trgmii"; + fixed-link { speed = <1000>; full-duplex; @@ -112,12 +114,12 @@ mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; + switch@0 { compatible = "mediatek,mt7530"; #address-cells = <1>; #size-cells = <0>; reg = <0>; - pinctrl-names = "default"; reset-gpios = <&pio 33 0>; core-supply = <&mt6323_vpa_reg>; @@ -127,6 +129,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + port@0 { reg = <0>; label = "wan"; @@ -157,6 +160,7 @@ label = "cpu"; ethernet = <&gmac0>; phy-mode = "trgmii"; + fixed-link { speed = <1000>; full-duplex; @@ -372,16 +376,6 @@ }; }; - spi0_pins_a: spi@0 { - pins_spi { - pinmux = , - , - , - ; - bias-disable; - }; - }; - pwm_pins_a: pwm@0 { pins_pwm { pinmux = , @@ -392,6 +386,16 @@ }; }; + spi0_pins_a: spi@0 { + pins_spi { + pinmux = , + , + , + ; + bias-disable; + }; + }; + uart0_pins_a: uart@0 { pins_dat { pinmux = , @@ -425,11 +429,13 @@ label = "bpi-r2:isink:green"; default-state = "off"; }; + led@1 { reg = <1>; label = "bpi-r2:isink:red"; default-state = "off"; }; + led@2 { reg = <2>; label = "bpi-r2:isink:blue"; @@ -451,14 +457,6 @@ status = "disabled"; }; -&u3phy1 { - status = "okay"; -}; - -&u3phy2 { - status = "okay"; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_a>; @@ -478,3 +476,12 @@ vusb33-supply = <&mt6323_vusb_reg>; status = "okay"; }; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index 63ffb7862a56..17c578f0d261 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -20,47 +20,22 @@ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; }; -&pio { - nand_pins_default: nanddefault { - pins_dat { - pinmux = , - , - , - , - , - , - , - , - ; - input-enable; - drive-strength = ; - bias-pull-up; - }; - - pins_we { - pinmux = ; - drive-strength = ; - bias-pull-up = ; - }; - - pins_ale { - pinmux = ; - drive-strength = ; - bias-pull-down = ; - }; - }; +&bch { + status = "okay"; }; &nandc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_pins_default>; + nand@0 { reg = <0>; spare_per_sector = <64>; nand-ecc-mode = "hw"; nand-ecc-strength = <12>; nand-ecc-step-size = <1024>; + partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -104,6 +79,33 @@ }; }; -&bch { - status = "okay"; +&pio { + nand_pins_default: nanddefault { + pins_ale { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + pins_dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up; + }; + + pins_we { + pinmux = ; + drive-strength = ; + bias-pull-up = ; + }; + }; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi index 1e9579090629..256c5fd947bf 100644 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -18,6 +18,12 @@ #include "mt6323.dtsi" / { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -44,12 +50,6 @@ reg = <0 0x80000000 0 0x40000000>; }; - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - }; - usb_p1_vbus: regulator@0 { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; @@ -60,6 +60,16 @@ }; }; +&mmc0 { + vmmc-supply = <&mt6323_vemc3v3_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; +}; + +&mmc1 { + vmmc-supply = <&mt6323_vmch_reg>; + vqmmc-supply = <&mt6323_vmc_reg>; +}; + &uart0 { status = "okay"; }; @@ -72,16 +82,6 @@ status = "okay"; }; -&mmc0 { - vmmc-supply = <&mt6323_vemc3v3_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; -}; - -&mmc1 { - vmmc-supply = <&mt6323_vmch_reg>; - vqmmc-supply = <&mt6323_vmc_reg>; -}; - &usb1 { vbus-supply = <&usb_p1_vbus>; status = "okay";