From: Mark Lord Date: Fri, 2 May 2008 06:10:56 +0000 (-0400) Subject: sata_mv errata workaround for sata25 part 1 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=dd2890f60f8e15f14c8eb132779b2f15c49d1203;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git sata_mv errata workaround for sata25 part 1 Part 1 of workaround for errata "sata#25" for the 60x1 series (the second half of this errata workaround is still in development. Bit22 of the GPIO port has to be set "on" when in NCQ mode. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 0545a4916100..fbccf215d501 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1151,6 +1151,21 @@ static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs) writelfl(new_ltmode, port_mmio + LTMODE_OFS); } +static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + u32 old, new; + + /* workaround for 88SX60x1 FEr SATA#25 (part 1) */ + old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS); + if (want_ncq) + new = old | (1 << 22); + else + new = old & ~(1 << 22); + if (new != old) + writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); +} + static void mv_edma_cfg(struct ata_port *ap, int want_ncq) { u32 cfg; @@ -1164,10 +1179,11 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ - else if (IS_GEN_II(hpriv)) + else if (IS_GEN_II(hpriv)) { cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + mv_60x1_errata_sata25(ap, want_ncq); - else if (IS_GEN_IIE(hpriv)) { + } else if (IS_GEN_IIE(hpriv)) { cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ if (HAS_PCI(ap->host))