From: Mauro Carvalho Chehab Date: Sun, 4 Sep 2016 13:06:39 +0000 (-0300) Subject: cx231xx: fix GPIOs for Pixelview SBTVD hybrid X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=dd22893297d519bb849a98bfe39a248a71c34c25;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git cx231xx: fix GPIOs for Pixelview SBTVD hybrid commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream. This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Willy Tarreau --- diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index 13249e5a7891..c13c32347ad2 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -452,7 +452,7 @@ struct cx231xx_board cx231xx_boards[] = { .output_mode = OUT_MODE_VIP11, .demod_xfer_mode = 0, .ctl_pin_status_mask = 0xFFFFFFC4, - .agc_analog_digital_select_gpio = 0x00, /* According with PV cxPolaris.inf file */ + .agc_analog_digital_select_gpio = 0x1c, .tuner_sif_gpio = -1, .tuner_scl_gpio = -1, .tuner_sda_gpio = -1, diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 4ba3ce09b713..6f5ffcc19356 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -723,6 +723,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) break; case CX231XX_BOARD_CNXT_RDE_253S: case CX231XX_BOARD_CNXT_RDU_253S: + case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); break; case CX231XX_BOARD_HAUPPAUGE_EXETER: @@ -747,7 +748,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: - errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); + errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); break; default: break;