From: Viresh Kumar Date: Wed, 1 Feb 2012 10:42:18 +0000 (+0530) Subject: dmaengine: Add flow controller information to dma_slave_config X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=dcc043dc0c60046cf6b75ca04a462314cf64e2ba;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git dmaengine: Add flow controller information to dma_slave_config Flow controller is programmable for few controllers and there are few intelligent peripherals like, Synopsys JPEG controller, that needs to be a flow controller of DMA transfers on dest side. For this, currently two drivers, pl08x and dw_dmac, support flow controller to be passed from platform to these drivers. Perhaps, this should be a part of struct dma_slave_config. This patch adds another field device_fc to this structure. User drivers must pass this as true if they want to be flow controller of certain transfers. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b66..7e640bf27d2d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -25,6 +25,7 @@ #include #include #include +#include #include /** @@ -331,6 +332,9 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill + * with 'true' if peripheral should be flow controller. Direction will be + * selected at Runtime. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -357,6 +361,7 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + bool device_fc; }; static inline const char *dma_chan_name(struct dma_chan *chan)