From: Russell King Date: Sun, 24 Jan 2016 09:22:05 +0000 (+0000) Subject: net: dsa: fix mv88e6xxx switches X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=db0e51afa481088e6396f11e02018d64113a6578;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git net: dsa: fix mv88e6xxx switches Since commit 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops"), the Marvell 88E6xxx switch has been unable to pass traffic between ports - any received traffic is discarded by the switch. Taking a port out of bridge mode and configuring a vlan on it also the port to start passing traffic. With the debugfs files re-instated to allow debug of this issue by comparing the register settings between the working and non-working case, the reason becomes clear: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 - 7: 1111 707f 2001 2 2 2 2 2 0 2 + 7: 1111 707f 2001 1 1 1 1 1 0 1 Register 7 for the ports is the default vlan tag register, and in the non-working setup, it has been set to 2, despite vlan 2 not being configured. This causes the switch to drop all packets coming in to these ports. The working setup has the default vlan tag register set to 1, which is the default vlan when none is configured. Inspection of the code reveals why. The code prior to this commit was: - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... - if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID) - err = ds->drv->port_pvid_set(ds, p->port, vid); but the new code is: + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... + } ... + if (pvid) + err = _mv88e6xxx_port_pvid_set(ds, port, vid); This causes the new code to always set the default vlan to one higher than the old code. Fix this. Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops") Cc: Signed-off-by: Russell King Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 9fe33fc3c2b9..9cc73bf0a081 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1532,7 +1532,7 @@ int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, /* no PVID with ranges, otherwise it's a bug */ if (pvid) - err = _mv88e6xxx_port_pvid_set(ds, port, vid); + err = _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end); unlock: mutex_unlock(&ps->smi_mutex);