From: Mauro Carvalho Chehab Date: Sat, 2 Sep 2006 15:59:38 +0000 (-0300) Subject: V4L/DVB (4592): Fixes some troubles on saa7115 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d9dce96faec043f261dc5a57d43cfc0e2905f2a5;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git V4L/DVB (4592): Fixes some troubles on saa7115 Scaling were not working fine; Some reserved registers were wrong; On some situations, saa7115 were not properly being initializated. Removed some duplicated code. Thanks-to: Hans Verkuil for co-working on this patch. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 327a43d5116b..61642f83c957 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -48,6 +48,8 @@ #include #include +#define HRES_60HZ (480+16) + MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " "Hans Verkuil, Mauro Carvalho Chehab"); @@ -75,6 +77,8 @@ struct saa711x_state { int contrast; int hue; int sat; + int width; + int height; enum v4l2_chip_ident ident; u32 audclk_freq; u32 crystal_freq; @@ -93,40 +97,32 @@ static inline int saa711x_write(struct i2c_client *client, u8 reg, u8 value) /* Sanity routine to check if a register is present */ static int saa711x_has_reg(const int id, const u8 reg) { + if (id == V4L2_IDENT_SAA7111) + return reg < 0x20 && reg != 0x01 && reg != 0x0f && + (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; + + /* common for saa7113/4/5/8 */ + if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || + reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || + reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || + reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) + return 0; + switch (id) { - case V4L2_IDENT_SAA7111: - if (reg>0x1f || reg==1 || reg==0x0f || reg==0x14 || reg==0x18 - || reg==0x19 || reg==0x1d || reg==0x1e) - return 0; - break; case V4L2_IDENT_SAA7113: - if (reg>0x62 || reg==0x14 || (reg>=0x18 && reg<=0x1e) || - (reg>=0x20 && reg<=0x3f) ||reg==0x5f ) - return 0; - break; + return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && + reg != 0x5d && reg < 0x63; case V4L2_IDENT_SAA7114: - if (reg>=0xf0 || (reg>=0x1a && reg<=0x1e) || - (reg>=0x20 && reg<=0x2f) || - (reg>=0x63 && reg<=0x7f) ) - return 0; - break; + return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && + (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && + reg != 0x81 && reg < 0xf0; case V4L2_IDENT_SAA7115: - if ((reg>=0x20 && reg<=0x2f) || (reg==0x5c) || - (reg>=0xfc && reg<=0xfe) ) - return 0; - break; + return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); case V4L2_IDENT_SAA7118: - if (reg>=0xf0 || (reg>=0x1a && reg<=0x1d) || - (reg>=0x63 && reg<=0x6f) ) - return 0; + return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && + (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && + (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; } - - /* Those registers are reserved for all family */ - if (unlikely((reg>=0x20 && reg<=0x22) || - (reg>=0x26 && reg<=0x28) || - (reg>=0x3b && reg<=0x3f) || (reg==0x5f) || - (reg>=0x63 && reg<=0x6f) ) ) - return 0; return 1; } @@ -258,6 +254,9 @@ static const unsigned char saa7115_init_auto_input[] = { R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ + + R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ + /* Power Device Control */ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ @@ -333,8 +332,8 @@ static const unsigned char saa7115_cfg_60hz_video[] = { R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, /* vwindow length 0xf8 = 248 */ - R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0xf8, - R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, + R_CA_B_VERT_INPUT_WINDOW_LENGTH, HRES_60HZ>>1, + R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, HRES_60HZ>>9, /* hwindow 0x02d0 = 720 */ R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, @@ -345,11 +344,6 @@ static const unsigned char saa7115_cfg_60hz_video[] = { R_F5_PULSGEN_LINE_LENGTH, 0xad, R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, - R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */ - R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ - R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */ - R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ - R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ 0x00, 0x00 }; @@ -423,21 +417,11 @@ static const unsigned char saa7115_cfg_50hz_video[] = { R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, - /* vsize 0x0120 = 288 */ - R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 0x20, - R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x01, - R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ R_F5_PULSGEN_LINE_LENGTH, 0xb0, R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, - R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */ - R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler (was 0xD0) */ - R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ - R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ - R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ - 0x00, 0x00 }; @@ -466,7 +450,6 @@ static const unsigned char saa7115_cfg_vbi_off[] = { static const unsigned char saa7115_init_misc[] = { R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, - 0x82, 0x00, /* Reserved register - value should be zero*/ R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, R_84_I_PORT_SIGNAL_DEF, 0x20, R_85_I_PORT_SIGNAL_POLAR, 0x21, @@ -823,6 +806,112 @@ static int saa711x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *c return 0; } +static int saa711x_set_size(struct i2c_client *client, int width, int height) +{ + struct saa711x_state *state = i2c_get_clientdata(client); + int HPSC, HFSC; + int VSCY; + int res; + int is_50hz = state->std & V4L2_STD_625_50; + int Vsrc = is_50hz ? 576 : 480; + + v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height); + + /* FIXME need better bounds checking here */ + if ((width < 1) || (width > 1440)) + return -EINVAL; + if ((height < 1) || (height > Vsrc)) + return -EINVAL; + + if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) { + /* Decoder only supports 720 columns and 480 or 576 lines */ + if (width != 720) + return -EINVAL; + if (height != Vsrc) + return -EINVAL; + } + + state->width = width; + state->height = height; + + if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) + return 0; + + /* probably have a valid size, let's set it */ + /* Set output width/height */ + /* width */ + + saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, + (u8) (width & 0xff)); + saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((width >> 8) & 0xff)); + + /* Vertical Scaling uses height/2 */ + res=height/2; + + /* On 60Hz, it is using a higher Vertical Output Size */ + if (!is_50hz) + res+=(480-HRES_60HZ)>>1; + + /* height */ + saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, + (u8) (res & 0xff)); + saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((res >> 8) & 0xff)); + + /* Scaling settings */ + /* Hprescaler is floor(inres/outres) */ + HPSC = (int)(720 / width); + /* 0 is not allowed (div. by zero) */ + HPSC = HPSC ? HPSC : 1; + HFSC = (int)((1024 * 720) / (HPSC * width)); + /* FIXME hardcodes to "Task B" + * write H prescaler integer */ + saa711x_write(client, R_D0_B_HORIZ_PRESCALING, + (u8) (HPSC & 0x3f)); + + v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); + /* write H fine-scaling (luminance) */ + saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC, + (u8) (HFSC & 0xff)); + saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, + (u8) ((HFSC >> 8) & 0xff)); + /* write H fine-scaling (chrominance) + * must be lum/2, so i'll just bitshift :) */ + saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING, + (u8) ((HFSC >> 1) & 0xff)); + saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB, + (u8) ((HFSC >> 9) & 0xff)); + + VSCY = (int)((1024 * Vsrc) / height); + v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); + + /* Correct Contrast and Luminance */ + saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL, + (u8) (64 * 1024 / VSCY)); + saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL, + (u8) (64 * 1024 / VSCY)); + + /* write V fine-scaling (luminance) */ + saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + /* write V fine-scaling (chrominance) */ + saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + + saa711x_writeregs(client, saa7115_cfg_reset_scaler); + + /* Activates task "B" */ + saa711x_write(client, R_80_GLOBAL_CNTL_1, + saa711x_read(client,R_80_GLOBAL_CNTL_1)|0x20); + + return 0; +} + static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) { struct saa711x_state *state = i2c_get_clientdata(client); @@ -837,13 +926,17 @@ static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) if (std == state->std) return; + state->std = std; + // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. if (std & V4L2_STD_525_60) { v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n"); saa711x_writeregs(client, saa7115_cfg_60hz_video); + saa711x_set_size(client,720,480); } else { v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n"); saa711x_writeregs(client, saa7115_cfg_50hz_video); + saa711x_set_size(client,720,576); } /* Register 0E - Bits D6-D4 on NO-AUTO mode @@ -855,8 +948,6 @@ static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) 011 NTSC N (3.58MHz) PAL M (3.58MHz) 100 reserved NTSC-Japan (3.58MHz) */ - state->std = std; - if (state->ident == V4L2_IDENT_SAA7111 || state->ident == V4L2_IDENT_SAA7113) { u8 reg = saa711x_read(client, R_0E_CHROMA_CNTL_1) & 0x8f; @@ -937,6 +1028,7 @@ static void saa711x_log_status(struct i2c_client *client) v4l_info(client, "Detected format: BW/No color\n"); break; } + v4l_info(client, "Width, Height: %d, %d\n", state->width, state->height); } /* setup the sliced VBI lcr registers according to the sliced VBI format */ @@ -1051,100 +1143,6 @@ static int saa711x_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt return 0; } -static int saa711x_set_size(struct i2c_client *client, int width, int height) -{ - struct saa711x_state *state = i2c_get_clientdata(client); - int HPSC, HFSC; - int VSCY; - int res; - int is_50hz = state->std & V4L2_STD_625_50; - int Vsrc = is_50hz ? 576 : 480+16; - - v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height); - - /* FIXME need better bounds checking here */ - if ((width < 1) || (width > 1440)) - return -EINVAL; - if ((height < 1) || (height > 960)) - return -EINVAL; - - if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) { - /* Decoder only supports 720 columns and 480 or 576 lines */ - if (width != 720) - return -EINVAL; - if (height != Vsrc) - return -EINVAL; - } - if (!saa711x_has_reg(state->ident,R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) - return 0; - - /* probably have a valid size, let's set it */ - /* Set output width/height */ - /* width */ - - saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, - (u8) (width & 0xff)); - saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, - (u8) ((width >> 8) & 0xff)); - - /* Vertical Scaling uses height/2 */ - res=height/2; - - /* height */ - saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, - (u8) (res & 0xff)); - saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, - (u8) ((res >> 8) & 0xff)); - - /* Scaling settings */ - /* Hprescaler is floor(inres/outres) */ - HPSC = (int)(720 / width); - /* 0 is not allowed (div. by zero) */ - HPSC = HPSC ? HPSC : 1; - HFSC = (int)((1024 * 720) / (HPSC * width)); - /* FIXME hardcodes to "Task B" - * write H prescaler integer */ - saa711x_write(client, R_D0_B_HORIZ_PRESCALING, - (u8) (HPSC & 0x3f)); - - v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); - /* write H fine-scaling (luminance) */ - saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC, - (u8) (HFSC & 0xff)); - saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, - (u8) ((HFSC >> 8) & 0xff)); - /* write H fine-scaling (chrominance) - * must be lum/2, so i'll just bitshift :) */ - saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING, - (u8) ((HFSC >> 1) & 0xff)); - saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB, - (u8) ((HFSC >> 9) & 0xff)); - - VSCY = (int)((1024 * Vsrc) / height); - v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); - - /* Correct Contrast and Luminance */ - saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL, - (u8) (64 * 1024 / VSCY)); - saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL, - (u8) (64 * 1024 / VSCY)); - - /* write V fine-scaling (luminance) */ - saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC, - (u8) (VSCY & 0xff)); - saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB, - (u8) ((VSCY >> 8) & 0xff)); - /* write V fine-scaling (chrominance) */ - saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC, - (u8) (VSCY & 0xff)); - saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, - (u8) ((VSCY >> 8) & 0xff)); - - saa711x_writeregs(client, saa7115_cfg_reset_scaler); - - return 0; -} - static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) { if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { @@ -1529,11 +1527,7 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind) saa711x_writeregs(client, saa7115_init_auto_input); } saa711x_writeregs(client, saa7115_init_misc); - state->std = V4L2_STD_NTSC; - saa711x_set_size(client, 720, 480); - saa711x_writeregs(client, saa7115_cfg_60hz_video); - saa711x_set_audio_clock_freq(client, state->audclk_freq); - saa711x_writeregs(client, saa7115_cfg_reset_scaler); + saa711x_set_v4lstd(client, V4L2_STD_NTSC); i2c_attach_client(client);