From: Ezequiel Garcia Date: Mon, 10 Feb 2014 23:00:23 +0000 (-0300) Subject: watchdog: orion: Make sure the watchdog is initially stopped X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d9d0c53dac7757aa198b1bd60c56f996c78c7ff7;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git watchdog: orion: Make sure the watchdog is initially stopped Having the watchdog initially fully stopped is important to avoid any spurious watchdog triggers, in case the registers are not in its reset state. If the watchdog rstout is enabled and the watchdog counter running, this initial stop is not performed, to comply with the 'nowayout' parameter. Reviewed-by: Guenter Roeck Tested-by: Sebastian Hesselbarth Tested-by: Willy Tarreau Signed-off-by: Ezequiel Garcia Acked-by: Wim Van Sebroeck Tested-By: Jason Gunthorpe Signed-off-by: Jason Cooper --- diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index 67460337808c..e10b0b1accce 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -77,6 +77,16 @@ static int orion_wdt_stop(struct watchdog_device *wdt_dev) return 0; } +static int orion_wdt_enabled(void) +{ + bool enabled, running; + + enabled = readl(RSTOUTn_MASK) & WDT_RESET_OUT_EN; + running = readl(wdt_reg + TIMER_CTRL) & WDT_EN; + + return enabled && running; +} + static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev) { return readl(wdt_reg + WDT_VAL) / wdt_tclk; @@ -142,6 +152,15 @@ static int orion_wdt_probe(struct platform_device *pdev) orion_wdt.max_timeout = wdt_max_duration; watchdog_init_timeout(&orion_wdt, heartbeat, &pdev->dev); + /* + * Let's make sure the watchdog is fully stopped, unless it's + * explicitly enabled. This may be the case if the module was + * removed and re-insterted, or if the bootloader explicitly + * set a running watchdog before booting the kernel. + */ + if (!orion_wdt_enabled()) + orion_wdt_stop(&orion_wdt); + watchdog_set_nowayout(&orion_wdt, nowayout); ret = watchdog_register_device(&orion_wdt); if (ret)