From: Adrian Bunk Date: Tue, 4 Mar 2008 23:26:15 +0000 (-0800) Subject: the scheduled rc80211-simple.c removal X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d9357136ac4729f589543afb6b1d17d443ae4f71;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git the scheduled rc80211-simple.c removal Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 2cf4d7ad7b0b..7279595b96c3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -230,16 +230,6 @@ Who: Jean Delvare --------------------------- -What: rc80211-simple rate control algorithm for mac80211 -When: 2.6.26 -Files: net/mac80211/rc80211-simple.c -Why: This algorithm was provided for reference but always exhibited bad - responsiveness and performance and has some serious flaws. It has been - replaced by rc80211-pid. -Who: Stefano Brivio - ---------------------------- - What (Why): - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files (superseded by xt_TOS/xt_tos target & match) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 3c3f62faae1e..520a5180a4f6 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -32,15 +32,6 @@ config MAC80211_RC_DEFAULT_PID default rate control algorithm. You should choose this unless you know what you are doing. -config MAC80211_RC_DEFAULT_SIMPLE - bool "Simple rate control algorithm" - select MAC80211_RC_SIMPLE - ---help--- - Select the simple rate control as the default rate - control algorithm. Note that this is a non-responsive, - dumb algorithm. You should choose the PID rate control - instead. - config MAC80211_RC_DEFAULT_NONE bool "No default algorithm" depends on EMBEDDED @@ -57,7 +48,6 @@ comment "build the algorithm into mac80211." config MAC80211_RC_DEFAULT string default "pid" if MAC80211_RC_DEFAULT_PID - default "simple" if MAC80211_RC_DEFAULT_SIMPLE default "" config MAC80211_RC_PID @@ -70,15 +60,6 @@ config MAC80211_RC_PID Say Y or M unless you're sure you want to use a different rate control algorithm. -config MAC80211_RC_SIMPLE - tristate "Simple rate control algorithm (DEPRECATED)" - ---help--- - This option enables a very simple, non-responsive TX - rate control algorithm. This algorithm is deprecated - and will be removed from the kernel in the near future. - It has been replaced by the PID algorithm. - - Say N unless you know what you are doing. endmenu config MAC80211_MESH diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 829ce4256b76..70f4b26c2d87 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -44,9 +44,7 @@ mac80211-$(CONFIG_MAC80211_MESH) += \ # Build rate control algorithm(s) -CFLAGS_rc80211_simple.o += -DRC80211_SIMPLE_COMPILE CFLAGS_rc80211_pid_algo.o += -DRC80211_PID_COMPILE -mac80211-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc-pid-$(CONFIG_MAC80211_RC_PID)) # Modular rate algorithms are assigned to mac80211-m - make separate modules diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 484b063a3538..55b63712e48c 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -1803,13 +1803,9 @@ static int __init ieee80211_init(void) BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb)); - ret = rc80211_simple_init(); - if (ret) - goto out; - ret = rc80211_pid_init(); if (ret) - goto out_cleanup_simple; + goto out; ret = ieee80211_wme_register(); if (ret) { @@ -1824,15 +1820,12 @@ static int __init ieee80211_init(void) out_cleanup_pid: rc80211_pid_exit(); - out_cleanup_simple: - rc80211_simple_exit(); out: return ret; } static void __exit ieee80211_exit(void) { - rc80211_simple_exit(); rc80211_pid_exit(); if (mesh_allocated) diff --git a/net/mac80211/ieee80211_rate.h b/net/mac80211/ieee80211_rate.h index bfd0a1982e4a..5b45f33cb766 100644 --- a/net/mac80211/ieee80211_rate.h +++ b/net/mac80211/ieee80211_rate.h @@ -171,21 +171,6 @@ void rate_control_deinitialize(struct ieee80211_local *local); /* Rate control algorithms */ -#if defined(RC80211_SIMPLE_COMPILE) || \ - (defined(CONFIG_MAC80211_RC_SIMPLE) && \ - !defined(CONFIG_MAC80211_RC_SIMPLE_MODULE)) -extern int rc80211_simple_init(void); -extern void rc80211_simple_exit(void); -#else -static inline int rc80211_simple_init(void) -{ - return 0; -} -static inline void rc80211_simple_exit(void) -{ -} -#endif - #if defined(RC80211_PID_COMPILE) || \ (defined(CONFIG_MAC80211_RC_PID) && \ !defined(CONFIG_MAC80211_RC_PID_MODULE)) diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c deleted file mode 100644 index 4f72fdca7f12..000000000000 --- a/net/mac80211/rc80211_simple.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright 2002-2005, Instant802 Networks, Inc. - * Copyright 2005, Devicescape Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "ieee80211_i.h" -#include "ieee80211_rate.h" -#include "debugfs.h" - - -/* This is a minimal implementation of TX rate controlling that can be used - * as the default when no improved mechanisms are available. */ - -#define RATE_CONTROL_NUM_DOWN 20 -#define RATE_CONTROL_NUM_UP 15 - -#define RATE_CONTROL_EMERG_DEC 2 -#define RATE_CONTROL_INTERVAL (HZ / 20) -#define RATE_CONTROL_MIN_TX 10 - -static void rate_control_rate_inc(struct ieee80211_local *local, - struct sta_info *sta) -{ - struct ieee80211_sub_if_data *sdata; - struct ieee80211_supported_band *sband; - int i = sta->txrate_idx; - int maxrate; - - sdata = sta->sdata; - if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) { - /* forced unicast rate - do not change STA rate */ - return; - } - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1; - - if (i > sband->n_bitrates) - i = sband->n_bitrates - 2; - - while (i + 1 < sband->n_bitrates) { - i++; - if (rate_supported(sta, sband->band, i) && - (maxrate < 0 || i <= maxrate)) { - sta->txrate_idx = i; - break; - } - } -} - - -static void rate_control_rate_dec(struct ieee80211_local *local, - struct sta_info *sta) -{ - struct ieee80211_sub_if_data *sdata; - struct ieee80211_supported_band *sband; - int i = sta->txrate_idx; - - sdata = sta->sdata; - if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) { - /* forced unicast rate - do not change STA rate */ - return; - } - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - if (i > sband->n_bitrates) - i = sband->n_bitrates; - - while (i > 0) { - i--; - if (rate_supported(sta, sband->band, i)) { - sta->txrate_idx = i; - break; - } - } -} - -struct global_rate_control { - int dummy; -}; - -struct sta_rate_control { - unsigned long last_rate_change; - u32 tx_num_failures; - u32 tx_num_xmit; - - unsigned long avg_rate_update; - u32 tx_avg_rate_sum; - u32 tx_avg_rate_num; - -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *tx_avg_rate_sum_dentry; - struct dentry *tx_avg_rate_num_dentry; -#endif -}; - - -static void rate_control_simple_tx_status(void *priv, struct net_device *dev, - struct sk_buff *skb, - struct ieee80211_tx_status *status) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct sta_info *sta; - struct sta_rate_control *srctrl; - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - if (!sta) - goto unlock; - - srctrl = sta->rate_ctrl_priv; - srctrl->tx_num_xmit++; - if (status->excessive_retries) { - srctrl->tx_num_failures++; - sta->tx_retry_failed++; - sta->tx_num_consecutive_failures++; - sta->tx_num_mpdu_fail++; - } else { - sta->tx_num_consecutive_failures = 0; - sta->tx_num_mpdu_ok++; - } - sta->tx_retry_count += status->retry_count; - sta->tx_num_mpdu_fail += status->retry_count; - - if (time_after(jiffies, - srctrl->last_rate_change + RATE_CONTROL_INTERVAL) && - srctrl->tx_num_xmit > RATE_CONTROL_MIN_TX) { - u32 per_failed; - srctrl->last_rate_change = jiffies; - - per_failed = (100 * sta->tx_num_mpdu_fail) / - (sta->tx_num_mpdu_fail + sta->tx_num_mpdu_ok); - /* TODO: calculate average per_failed to make adjusting - * parameters easier */ -#if 0 - if (net_ratelimit()) { - printk(KERN_DEBUG "MPDU fail=%d ok=%d per_failed=%d\n", - sta->tx_num_mpdu_fail, sta->tx_num_mpdu_ok, - per_failed); - } -#endif - - /* - * XXX: Make these configurable once we have an - * interface to the rate control algorithms - */ - if (per_failed > RATE_CONTROL_NUM_DOWN) { - rate_control_rate_dec(local, sta); - } else if (per_failed < RATE_CONTROL_NUM_UP) { - rate_control_rate_inc(local, sta); - } - srctrl->tx_avg_rate_sum += status->control.tx_rate->bitrate; - srctrl->tx_avg_rate_num++; - srctrl->tx_num_failures = 0; - srctrl->tx_num_xmit = 0; - } else if (sta->tx_num_consecutive_failures >= - RATE_CONTROL_EMERG_DEC) { - rate_control_rate_dec(local, sta); - } - - if (time_after(jiffies, srctrl->avg_rate_update + 60 * HZ)) { - srctrl->avg_rate_update = jiffies; - if (srctrl->tx_avg_rate_num > 0) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - DECLARE_MAC_BUF(mac); - printk(KERN_DEBUG "%s: STA %s Average rate: " - "%d (%d/%d)\n", - dev->name, print_mac(mac, sta->addr), - srctrl->tx_avg_rate_sum / - srctrl->tx_avg_rate_num, - srctrl->tx_avg_rate_sum, - srctrl->tx_avg_rate_num); -#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ - srctrl->tx_avg_rate_sum = 0; - srctrl->tx_avg_rate_num = 0; - } - } - - unlock: - rcu_read_unlock(); -} - - -static void -rate_control_simple_get_rate(void *priv, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct ieee80211_sub_if_data *sdata; - struct sta_info *sta; - int rateidx; - u16 fc; - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - /* Send management frames and broadcast/multicast data using lowest - * rate. */ - fc = le16_to_cpu(hdr->frame_control); - if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || - is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate = rate_lowest(local, sband, sta); - rcu_read_unlock(); - return; - } - - /* If a forced rate is in effect, select it. */ - sdata = IEEE80211_DEV_TO_SUB_IF(dev); - if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) - sta->txrate_idx = sdata->bss->force_unicast_rateidx; - - rateidx = sta->txrate_idx; - - if (rateidx >= sband->n_bitrates) - rateidx = sband->n_bitrates - 1; - - sta->last_txrate_idx = rateidx; - - rcu_read_unlock(); - - sel->rate = &sband->bitrates[rateidx]; -} - - -static void rate_control_simple_rate_init(void *priv, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) -{ - struct ieee80211_supported_band *sband; - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - /* TODO: This routine should consider using RSSI from previous packets - * as we need to have IEEE 802.1X auth succeed immediately after assoc.. - * Until that method is implemented, we will use the lowest supported rate - * as a workaround, */ - sta->txrate_idx = rate_lowest_index(local, sband, sta); -} - - -static void * rate_control_simple_alloc(struct ieee80211_local *local) -{ - struct global_rate_control *rctrl; - - rctrl = kzalloc(sizeof(*rctrl), GFP_ATOMIC); - - return rctrl; -} - - -static void rate_control_simple_free(void *priv) -{ - struct global_rate_control *rctrl = priv; - kfree(rctrl); -} - - -static void rate_control_simple_clear(void *priv) -{ -} - - -static void * rate_control_simple_alloc_sta(void *priv, gfp_t gfp) -{ - struct sta_rate_control *rctrl; - - rctrl = kzalloc(sizeof(*rctrl), gfp); - - return rctrl; -} - - -static void rate_control_simple_free_sta(void *priv, void *priv_sta) -{ - struct sta_rate_control *rctrl = priv_sta; - kfree(rctrl); -} - -#ifdef CONFIG_MAC80211_DEBUGFS - -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -static ssize_t sta_tx_avg_rate_sum_read(struct file *file, - char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct sta_rate_control *srctrl = file->private_data; - char buf[20]; - - sprintf(buf, "%d\n", srctrl->tx_avg_rate_sum); - return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); -} - -static const struct file_operations sta_tx_avg_rate_sum_ops = { - .read = sta_tx_avg_rate_sum_read, - .open = open_file_generic, -}; - -static ssize_t sta_tx_avg_rate_num_read(struct file *file, - char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct sta_rate_control *srctrl = file->private_data; - char buf[20]; - - sprintf(buf, "%d\n", srctrl->tx_avg_rate_num); - return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); -} - -static const struct file_operations sta_tx_avg_rate_num_ops = { - .read = sta_tx_avg_rate_num_read, - .open = open_file_generic, -}; - -static void rate_control_simple_add_sta_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct sta_rate_control *srctrl = priv_sta; - - srctrl->tx_avg_rate_num_dentry = - debugfs_create_file("rc_simple_sta_tx_avg_rate_num", 0400, - dir, srctrl, &sta_tx_avg_rate_num_ops); - srctrl->tx_avg_rate_sum_dentry = - debugfs_create_file("rc_simple_sta_tx_avg_rate_sum", 0400, - dir, srctrl, &sta_tx_avg_rate_sum_ops); -} - -static void rate_control_simple_remove_sta_debugfs(void *priv, void *priv_sta) -{ - struct sta_rate_control *srctrl = priv_sta; - - debugfs_remove(srctrl->tx_avg_rate_sum_dentry); - debugfs_remove(srctrl->tx_avg_rate_num_dentry); -} -#endif - -static struct rate_control_ops mac80211_rcsimple = { - .name = "simple", - .tx_status = rate_control_simple_tx_status, - .get_rate = rate_control_simple_get_rate, - .rate_init = rate_control_simple_rate_init, - .clear = rate_control_simple_clear, - .alloc = rate_control_simple_alloc, - .free = rate_control_simple_free, - .alloc_sta = rate_control_simple_alloc_sta, - .free_sta = rate_control_simple_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rate_control_simple_add_sta_debugfs, - .remove_sta_debugfs = rate_control_simple_remove_sta_debugfs, -#endif -}; - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simple rate control algorithm"); - -int __init rc80211_simple_init(void) -{ - return ieee80211_rate_control_register(&mac80211_rcsimple); -} - -void rc80211_simple_exit(void) -{ - ieee80211_rate_control_unregister(&mac80211_rcsimple); -} - -#ifdef CONFIG_MAC80211_RC_SIMPLE_MODULE -module_init(rc80211_simple_init); -module_exit(rc80211_simple_exit); -#endif