From: Jaehoon Chung Date: Mon, 3 Mar 2014 02:36:41 +0000 (+0900) Subject: mmc: dw_mmc: use the mmc_of_parse() instead of local parser X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d8a4fb0e60c613d85eda57fd1701177ae2f1c6b5;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mmc: dw_mmc: use the mmc_of_parse() instead of local parser mmc_of_parse() have been already parsed the general capability. Didn't need to use the local parser. Signed-off-by: Jaehoon Chung Acked-by: Seungwon Jeon Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8f3f13315358..2d4a7258a10d 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -69,10 +69,6 @@ Optional properties: * supports-highspeed: Enables support for high speed cards (up to 50MHz) -* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode - -* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode - * broken-cd: as documented in mmc core bindings. * vmmc-supply: The phandle to the regulator to use for vmmc. If this is @@ -103,7 +99,6 @@ board specific portions as listed below. clock-freq-min-max = <400000 200000000>; num-slots = <1>; supports-highspeed; - caps2-mmc-hs200-1_8v; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 637f52a62c56..8da598f8d96b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2046,21 +2046,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) return quirks; } -/* find out bus-width for a given slot */ -static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) -{ - struct device_node *np = dw_mci_of_find_slot_node(dev, slot); - u32 bus_wd = 1; - - if (!np) - return 1; - - if (of_property_read_u32(np, "bus-width", &bus_wd)) - dev_err(dev, "bus-width property not found, assuming width" - " as 1\n"); - return bus_wd; -} - /* find the write protect gpio for a given slot; or -1 if none specified */ static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot) { @@ -2108,10 +2093,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) { return 0; } -static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) -{ - return 1; -} static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) { return NULL; @@ -2134,7 +2115,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) const struct dw_mci_drv_data *drv_data = host->drv_data; int ctrl_id, ret; u32 freq[2]; - u8 bus_width; mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); if (!mmc) @@ -2189,19 +2169,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->caps2) mmc->caps2 = host->pdata->caps2; - if (host->pdata->get_bus_wd) - bus_width = host->pdata->get_bus_wd(slot->id); - else if (host->dev->of_node) - bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); - else - bus_width = 1; - - switch (bus_width) { - case 8: - mmc->caps |= MMC_CAP_8_BIT_DATA; - case 4: - mmc->caps |= MMC_CAP_4_BIT_DATA; - } + mmc_of_parse(mmc); if (host->pdata->blk_settings) { mmc->max_segs = host->pdata->blk_settings->max_segs; @@ -2399,24 +2367,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) return ERR_PTR(ret); } - if (of_find_property(np, "keep-power-in-suspend", NULL)) - pdata->pm_caps |= MMC_PM_KEEP_POWER; - - if (of_find_property(np, "enable-sdio-wakeup", NULL)) - pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; - if (of_find_property(np, "supports-highspeed", NULL)) pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; - if (of_find_property(np, "caps2-mmc-hs200-1_8v", NULL)) - pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR; - - if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL)) - pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR; - - if (of_get_property(np, "cd-inverted", NULL)) - pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; - return pdata; }