From: Harvey Harrison Date: Tue, 15 Jul 2008 19:21:41 +0000 (+0200) Subject: ide: eliminate FIT() macro X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d6cddd3cac6650f273a2595c9f403aacee01ab05;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ide: eliminate FIT() macro Replace the FIT() macro with the kernel-provided clamp_val() macro. FIT was always being called with a member of a struct ide_timing, which are shorts, and constant constraints for the min and max. Thus we can use clamp_val, rather than clamp_t. Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 3b12ffe77071..2e91c5870b4c 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -95,7 +95,6 @@ static struct ide_timing ide_timing[] = { #define IDE_TIMING_UDMA 0x80 #define IDE_TIMING_ALL 0xff -#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index efcf54338be7..a373101747b6 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -53,20 +53,20 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, u8 t = 0, offset = amd_offset(dev); pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; - case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; - case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; + case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; + case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; + case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; default: return; } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 566e0ecb8db1..e8c2570003ff 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -120,21 +120,21 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) if (~vdev->via_config->flags & VIA_BAD_AST) { pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); } pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; - case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; - case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; + case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; default: return; }