From: Tomi Valkeinen Date: Fri, 27 May 2016 10:49:05 +0000 (+0300) Subject: drm/omap: fix HDMI sync polarities X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d5e7efad7b34750942883997ff67e8afd4f883cc;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/omap: fix HDMI sync polarities While implementing writeback support, odd behavior of WBDELAYCOUNT was observed with the combination of WB capture and HDMI. The result of the debugging was that the HDMI sync polarities are not set correctly. The current code sets the sync polarities going from HDMI WP to DISPC according to the video mode used, which seems to work normally fine, but causes problems with WB as WB expects the syncs to be active-high. This patch changes the HDMI sync polarities so that the DISPC always gets active-high syncs from HDMI WP, and the HDMI core gets sync polarities according to the used video mode. Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart --- diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c b/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c index b783d5a0750e..597ec9d87d1d 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c @@ -147,15 +147,17 @@ void hdmi_wp_video_config_interface(struct hdmi_wp_data *wp, struct videomode *vm) { u32 r; - bool vsync_pol, hsync_pol; + bool vsync_inv, hsync_inv; DSSDBG("Enter hdmi_wp_video_config_interface\n"); - vsync_pol = !!(vm->flags & DISPLAY_FLAGS_VSYNC_HIGH); - hsync_pol = !!(vm->flags & DISPLAY_FLAGS_HSYNC_HIGH); + vsync_inv = !!(vm->flags & DISPLAY_FLAGS_VSYNC_LOW); + hsync_inv = !!(vm->flags & DISPLAY_FLAGS_HSYNC_LOW); r = hdmi_read_reg(wp->base, HDMI_WP_VIDEO_CFG); - r = FLD_MOD(r, vsync_pol, 7, 7); - r = FLD_MOD(r, hsync_pol, 6, 6); + r = FLD_MOD(r, 1, 7, 7); /* VSYNC_POL to dispc active high */ + r = FLD_MOD(r, 1, 6, 6); /* HSYNC_POL to dispc active high */ + r = FLD_MOD(r, vsync_inv, 5, 5); /* CORE_VSYNC_INV */ + r = FLD_MOD(r, hsync_inv, 4, 4); /* CORE_HSYNC_INV */ r = FLD_MOD(r, !!(vm->flags & DISPLAY_FLAGS_INTERLACED), 3, 3); r = FLD_MOD(r, 1, 1, 0); /* HDMI_TIMING_MASTER_24BIT */ hdmi_write_reg(wp->base, HDMI_WP_VIDEO_CFG, r);